Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Modelling survival: exposure pattern, species sensitivity and uncertainty


The General Unified Threshold model for Survival (GUTS) integrates previously published toxicokinetic-toxicodynamic models and estimates survival with explicitly defined assumptions. Importantly, GUTS accounts for time-variable exposure to the stressor. We performed three studies to test the ability of GUTS to predict survival of aquatic organisms across different pesticide exposure patterns, time scales and species. Firstly, using synthetic data, we identified experimental data requirements which allow for the estimation of all parameters of the GUTS proper model. Secondly, we assessed how well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates to build species sensitivity distributions for different exposure patterns. We find that GUTS adequately predicts survival across exposure patterns that vary over time. When toxicity is assessed for time-variable concentrations species may differ in their responses depending on the exposure profile. This can result in different species sensitivity rankings and safe levels. The interplay of exposure pattern and species sensitivity deserves systematic investigation in order to better understand how organisms respond to stress, including humans.


The General Unified Threshold model of Survival (GUTS)

Effects of stressors on survival over time of systems, such as organisms or mechanical systems, are studied in a wide range of disciplines, such as toxicology1,2,3,4, biology5,6,7, medicine8,9,10, engineering11,12 and social sciences13,14. In this paper, we take an ecotoxicological perspective, where we assess the potential of a specific application of survival analyses, namely as a module in toxicokinetic-toxicodynamic (TK-TD) modeling. We note, however, that similar survival analyses could be carried out for engineering or social science problems13,14. The commonly asked question in survival analysis is how one or multiple stressors affect survival over time and how we could predict it. Any answer to these questions entails specifying where the stressor is quantified (e.g. inside or outside the organism), deciding how to model compensatory processes (e.g. damage repair) and whether death of an organism or failure of a system is best viewed as a stochastic or as a deterministic event.

TK-TD models quantify the time-course of internal concentrations of chemicals, which is defined by uptake and elimination rates of chemicals (toxicokinetics), as well as the processes leading to toxic effects (toxicodynamics), which include damage accrual and recovery, as well as the death mechanisms explained below. Many TK-TD models exist in literature, each having their own (often implicit) assumptions of damage and mortality processes3,15. The General Unified Threshold model of Survival3 (GUTS) provides a theoretical framework for deriving consistent model equations for different choices and assumptions about stressor quantification, compensatory processes and the nature of the death process. Because GUTS unifies TK-TD assumptions, it allows researchers to systematically investigate how well different model assumptions perform when it comes to predicting survival of organisms. Moreover, due to its general nature and the importance of survival analysis for different fields of science, GUTS has diverse application domains.

GUTS originated in an ecotoxicology context, which is why the dose metric of a stressor in GUTS models is typically the concentration of a toxicant in the medium surrounding an organism (e.g., a concentration in a water body), the concentration of a toxicant inside the organism (i.e. internal concentration), or the damage caused by the toxicant. GUTS equations link a dose metric to survival, but GUTS does not prescribe any specific dose metric. Rather, GUTS offers a framework to use different dose metrics (i.e. external concentration of a toxicant, internal concentration of a toxicant, damage or scaled damage) in a consistent way. The decision on which dose metric to use depends on the research question and available data. Subsequently, GUTS provides the equations to estimate mortality when the dose metric exceeds a threshold3,16. One can assume that i) the threshold is distributed within a population, and when exceeded, the individual dies (individual tolerance, IT, assumption), or ii) there is one common threshold for all individuals, and when exceeded, the probability of an individual to die increases (stochastic death, SD, assumption)3,17,18. The detailed implications of these assumptions are discussed elsewhere3,19,20. The GUTS framework provides a unification of the abovementioned TK-TD model approaches by assuming that the threshold is distributed within a population and, when exceeded, the probability of an organism dying increases. This is the GUTS proper model. From that model, two simpler model implementations can be derived, namely GUTS-IT and GUTS-SD3,16. All three models, GUTS proper, GUTS-IT and GUTS-SD, can be applied, but because GUTS-IT and -SD have less parameters than the GUTS proper model, they are more easily calibrated and applied. Table 1 lists the various GUTS model implementations and notes what dose metric is used, what parameters need to be estimated, and the typical cases where one would use each specific implementation of the model. Equations of the GUTS proper model can be found in the original publication3. Equations for GUTS-SD and GUTS-IT have also been previously published16,21,22,23, but they are also reported in the Supplementary Information (SI) for clarity.

Table 1 GUTS flavors.

GUTS proper versus special cases GUTS-SD and GUTS-IT

The GUTS proper model integrates both death mechanisms SD and IT into a single framework. In practice, however, it is usually the special cases of GUTS-SD or GUTS-IT that are used in ecotoxicology. They are easier to implement into software, faster to run (although speed is becoming less of an issue with efficient algorithms, such as in the GUTS R-package, see SI), and place less stringent requirements on the dataset used for calibration. Choosing between SD and IT is difficult. Theoretical reasons to prefer one over the other are lacking and in practice they often provide a similar goodness-of-fit to the data20, present work. Even in the cases where either GUTS-IT or GUTS-SD clearly gives a better fit to measured data, this better fit may simply be because a model assumption is not met in a particular data set. To illustrate, if SD is the ‘actual’ mechanism, an unrecognized decrease in external concentration (or in bioavailability) over time may easily lead to a survival pattern more akin to IT (mortality levelling-off in time). For some research questions, it would be best to use the GUTS proper model (which combines SD and IT) and observe to what extent both mechanisms can help interpret the data. However, compared to the limit cases of SD or IT, the GUTS proper model requires estimation of one additional parameter. In practice, survival datasets used in ecotoxicology generally do not contain enough information to estimate all parameters of the GUTS proper model with sufficient precision. This is because a large number of individuals is required to provide strong information on probabilistic events and because the choices of concentrations and exposure durations also matter23. It is not clear which experimental designs can actually identify both death mechanisms and to what degree of precision.

GUTS in ecotoxicology and environmental risk assessment of chemicals

Here, we assess to what extent we can use GUTS to answer environmental risk assessment questions24,25,26. Toxic effects are usually determined in laboratory tests using individual organisms of standard species while keeping environmental and chemical exposure conditions as constant as possible. Extrapolating from standard toxicity test results to natural conditions where large numbers of species are exposed to fluctuating concentrations of numerous chemicals raises a range of issues, including variability in species sensitivity, interactions between species in communities and variabilities in exposure concentration and duration. GUTS provides a means of extrapolating laboratory test results to environmental conditions, but such extrapolation requires robust calibration and reliable forecasting.

We investigate calibration and forecasting of survival with GUTS in three case studies. In the first study, we discuss parameter identification for GUTS proper with respect to experimental design. To identify the data requirements for a precise and accurate GUTS proper parameterization, we use synthetic concentration-survival datasets. In the second study, we investigate the potential benefits of using GUTS for toxicity extrapolation across exposure patterns and time scales. We assess the predictive ability of GUTS by forecasting survival across different exposure patterns and quantifying uncertainty. Specifically, we assessed how well GUTS model parameters, calibrated with short-term survival data of Gammarus pulex exposed to pesticides, forecast effects of longer-term pulsed exposures. In the third study, we test the ability of GUTS to estimate 14-day lethal effect concentrations (LC50) of malathion for a range of species and use these estimates to build a species sensitivity distribution (SSD). In so doing, we demonstrate how using GUTS may help our understanding of the interplay between exposure pattern and species sensitivity under time-varying concentrations of chemicals.

Study 1: Optimizing experimental design for calibration of the GUTS proper model

To understand what data are needed to ensure a robust calibration of GUTS proper, synthetic data sets were created for G. pulex exposed to malathion, with different numbers of individuals per test concentration, different test durations and different numbers of test concentrations. This synthetic data was used to calibrate GUTS proper. Best fit values with 95% credible intervals for GUTS proper parameters were then estimated and compared.


In creating synthetic survival data, there are many degrees of freedom regarding the choice of observation times, concentrations and exposure scenarios (e.g., constant or time-varying). We decided to restrict our synthetic data to one particular case study where G. pulex are exposed to eight concentrations of malathion in water (0, 0.345–3.837 nmol/L, 20 individuals/concentration) for four days27 (see Table S1 in SI). Scaled internal concentration (SIC, Table 1) was chosen as a dose metric in this example. The change in scaled internal concentration of malathion in G. pulex (C*i) over time is given by dC*i(t)/dt = ke(Cw(t) − C*i(t), where Cw is the concentration of malathion in water in nmol/L and ke is the dominant rate constant. This is a constant that represents a combination of several physiological processes (e.g. elimination rate, damage repair rate; units: d−1). We started by fixing ke = 1 d−1, which provided a situation where 98% of the toxicokinetic and toxicodynamic steady state is reached after four days (i.e. the scaled internal concentration reaches a plateau). Because our focus was on the experimental conditions needed to allow a calibration of the GUTS proper model, we wanted to ensure that this parameter can, in principle, be estimated properly from the simulated data (see discussion in SI). Similarly, we wanted to have a situation where both death mechanisms (IT and SD) play a substantial role in explaining observed gammarid mortality over time. We achieved this by fixing the (log-normal) distribution of the threshold z, such that 95% of the individuals are within a factor 2 from the median threshold (Fs = 2, see SI). The remaining parameters were estimated by fitting GUTS proper to the original malathion survival data (for the resulting parameter fits, see Table S18 in SI). Using the resulting parameter set, we generated synthetic data for different experimental setups that vary in test duration (4 or 10 days), number of animals per treatment (20 or 100) and number of exposure treatments (5 or 8). For each setup, we generated three replicate datasets. Replicate datasets differed from each other because of the stochastic nature of the death mechanism, i.e., the choice of the threshold for each individual from a frequency distribution and the hazard rate that produces a probability to die at each time point. No additional variability was introduced; hence the model parameters themselves were kept constant for each individual to the values in Table S18 in SI. GUTS proper was fitted to the synthetic data sets with Bayesian methods using the R statistical software and with a likelihood method using Matlab (see SI for details about model software packages and code).


The results of the parameter identifiability analysis using the Bayesian approach are shown in Fig. 1. Results from the likelihood approach are provided in the SI and are very similar to the results using the Bayesian approach. The data with 100 animals per treatment allowed parameter estimation of the GUTS proper model with reasonable accuracy and precision (see error bars in Fig. 1). For the datasets with 20 animals, the precision and accuracy were much lower for some parameters, including the killing rate constant kk and median threshold z. Increasing the number of test animals or the duration of the experiment substantially reduced the uncertainty around the median value of z. In several cases, the confidence interval included one of the two limit cases (GUTS-SD or GUTS-IT), as indicated by intervals for Fs that included 1 (GUTS-SD) and intervals for kk that went to infinity (GUTS-IT). With a large number of test animals, kk is better estimated, but the spread of sensitivities (Fs) is still uncertain in several cases. This is consistent with datasets often being well described by both GUTS-IT and GUTS-SD20.

Figure 1: Parameter estimates; best-fit values with 95% credible intervals, resulting from the fits on the synthetic data.
figure 1

Dotted horizontal line indicates the true parameter value that was used to produce the synthetic data sets. Data cases have bioassay designs which differ in number of animals (N), number of days test duration (T). Vertical broken line separates the datasets with 8 exposure concentrations (left) from those with only 5 (right) exposure concentrations. Arrows on confidence intervals indicate that the error bar extends much further (truncated to improve readability).


From Fig. 1, we evaluated the precision and accuracy with which each parameter of GUTS proper can be estimated. Even when parameter estimates have a very large uncertainty, the model predictions can still be sufficiently reliable for practical purposes because the correlation structure of the parameter estimates and the structure of the model constrain the model predictions (Figs 2, 3 and S1–4 in SI). The typically observed strong correlation among GUTS parameters means that the confidence regions around model predictions are not as wide as insinuated by the individual parameter confidence intervals.

Figure 2: Forecasted and observed survival.
figure 2

The shaded areas indicate the confidence regions (95% parametric uncertainty, 100% stochasticity, 10000 simulations), while the solid green line is the median of these predictions. The more intense the red, the more predictions are overlapping. The observed survival is shown with black dots, but the last data points are highlighted with blue diamonds because those are also shown in Fig. 3.

Figure 3: Forecasted dose response curves at the last day of the repeated pulsed exposure experiments.
figure 3

The shaded areas indicate the confidence regions (95% parametric uncertainty, 100% stochasticity, 10000 simulations), while the solid green line is the median of these predictions and the observed survival is shown as blue diamond.

Estimating the parameter values for the GUTS proper model with a reasonable precision requires more complete toxicity datasets than those currently collected from the standardized ecotoxicity tests used in environmental risk assessment applications. Synthetic data provide insight into the usefulness of various experimental designs for estimating GUTS proper model parameters, and help optimizing these designs for different purposes and under different constraints (Fig. 1). More research is needed to identify how a given number of test organisms is best split between treatments, i.e. how we can best divide a certain number of available test organisms over treatment groups and how we select exposure concentrations and observation times to collect the optimal amount of information for the calibration of the GUTS proper model.

Prior to an ecotoxicity test, the expected gain of knowledge about model parameters can be used as an objective function to develop optimal test designs23. However, what is optimal will depend on which type of information is required. For example, the optimal design to estimate 4-day median lethal concentration (LC50) values will differ from the design needed to estimate ke, and from the design needed to minimize the uncertainty in predicted mortality in response to a given exposure scenario. Furthermore, optimal design depends on the properties of the chemical and species. For example, for chemicals with ‘slow’ kinetics (i.e. small values of elimination, recovery or dominant rate constants), we need longer test durations to estimate all model parameters precisely. By contrast, for chemicals with ‘fast’ kinetics, we can use shorter test durations, but may require more observations over a single day28. Investigating synthetic data allows us to explore the potential parameter space and derive general principles for optimal experimental design.

Study 2: Forecasting survival across different exposure patterns

The aim of this study was to assess the ability of GUTS to forecast survival of organisms exposed to varying patterns of exposure. Therefore, GUTS -SD and GUTS- IT (Table 1) were calibrated with survival data for G. pulex exposed constantly to pesticides for four days. These two model implementations were then used to simulate effects of longer-term pulsed exposures. Finally, the simulated survival rates were compared to experimental data from a repeated pulse exposure ecotoxicity test (Tables S1–S12 in SI). We studied four pesticides from three different classes: the benzimidazole fungicide carbendazim, the pyrethroid insecticide cypermethrin, and the organophosphate insecticides dimethoate and malathion. Scaled internal concentration (SIC) was chosen as a dose metric in this example again for simplicity and because this option was found to perform equally well as the more complex approach based upon scaled internal damage for the purpose of extrapolating over concentration and time16.


For the model calibration, unexposed animals (i.e. controls) from the acute toxicity tests (i.e. four day constant exposure, Tables S1–S4 in SI) were used to estimate the background hazard rate (hb(t)). Next, GUTS -IT and GUTS -SD were separately fit to survival data from acute toxicity tests with G. pulex (constant exposure to malathion, dimethoate, cypermethrin and carbendazim). GUTS -SD or GUTS -IT parameters values were obtained by maximum likelihood estimation3. Single parameter confidence intervals (Table S14 in SI) were approximated by likelihood profiling (critical value from the Chi-square distribution, df = 1, α = 0.05)29,30. To approximate the joint confidence regions of all parameters, we selected those parameter sets from the optimization procedure (simulated annealing) that were not rejected in a likelihood ratio test (critical value from Chi-square distribution, df = 3, α = 0.05). These parameter sets were subsequently used to generate forward predictions and uncertainty intervals. For the forecasting of survival across pulsed exposures, the control survival in the pulse ecotoxicity tests was used.

Subsequently, for the four chemicals, survival of G. pulex was simulated over 10 days (or 28 days in the case of malathion exposure) and for two different pulsed-exposure regimes and compared with survival observed in independent experiments (see SI for experimental details and data). The pulsed-exposure regimes A and B consisted of two one-day exposures with a short (A) or longer (B) interval in between exposures (left panel in Figs S1–S4 in SI). The minimum and maximum of all survival predictions at each time point can be interpreted as a 95% uncertainty interval on the model predictions (reflecting parameter uncertainty), because the likelihood ratio test used α = 0.05. To compare the model predictions with experimental data involving a small number of individuals, we also simulated uncertainty originating from stochastic survival (i.e. the stochasticity of the death process itself). This was achieved by simulating the exact number of individuals in a given experimental treatment (e.g. 70 for malathion and 80 for carbendazim, cypermethrin and dimethoate in Figs 2 and 3) ten times with each combination of parameters (n = 10, see SI for details).


How well do the implementations GUTS-SD and GUTS -IT, calibrated on data from short-term toxicity experiments and constant exposure forecast effects of longer-term pulsed exposures? The likelihood values indicate a better fit to the calibration data for GUTS- SD (Table S14 in SI), but the majority of survival predictions are in better agreement with the data for GUTS-IT (Table S15 in SI). Accuracy and precision of the GUTS- IT and GUTS- SD model predictions of the effect pattern differed among chemicals and exposure regimes (Figs 2 and S1–S4 in SI). For malathion and carbendazim both models predicted too much mortality over time, whereas for cypermethrin, both models predicted too little mortality over time. For dimethoate, GUTS-SIC-IT predicted too little mortality over time, whereas GUTS-SIC-SD predictions agreed well with the data. When only considering effects at the end of the experiment (10 or 28 days), as is classically done for applications in environmental risk assessment, then the observed percentages of survivors are within the 95% confidence region of the model predictions in 8 out of 16 cases (Fig. 3 and panels D, F, J, L in Figs S1–S4 in SI).


Data points outside the confidence band occur frequently when fitting concentration-response curves to standard toxicity data. Thus data points outside the confidence-band of a forecasted concentration-response curve by GUTS, such as those in Fig. 3, may also be acceptable. Plotting of forecasted dose-response curves (Fig. 3) enables risk assessors to judge for themselves.

For GUTS-SD and GUTS-IT, standard ecotoxicity data is sufficient for model calibration. Using these models, we demonstrated that concentration-response curves can be generated for any desired exposure period, and that including time-varying exposure is possible (Figs 2 and 3). Furthermore, we could generate information about the time course of predicted survival (Fig. 2). This information has potential to complement the current information used for environmental risk assessment, which only focuses on concentration-response curves at the end of the experiment. In some of our simulations, the forecasted survival over longer durations than the calibration experiments tends to overestimate mortality (malathion, carbendazim, GUTS-SD prediction for dimethoate), whereas in others the forecasts underestimated mortality (cypermethrin, GUTS-IT prediction for dimethoate). This is in contrast with an earlier finding that GUTS- SD and GUTS-IT, calibrated on short-term tests tend to overestimate mortality in forecasts of longer exposure durations16. In another study using scaled damage as the dose metrics and 14 different chemicals, both GUTS -SD and GUTS -IT fit equally well to the data20. Overall, we suggest that given the current evidence, neither model is superior. In reality, survival likely follows a curve between these two limit cases of GUTS proper. With respect to application in environmental risk assessment, it cannot be known a priori which implementation will predict higher mortality or provide the best agreement with data under differing exposure patterns21. Indeed, the sensitivity of model output to changes in GUTS parameter values differs among exposure scenarios21, which partly explains why the IT and SD implementations provide different predictions under different scenarios. Hence it seems prudent to use both GUTS-SD and GUTS-IT (or GUTS proper, if sufficient data is available for calibration) for environmental risk assessment purposes. Furthermore, the worst case of GUTS-IT and GUTS-SD is in all of our cases either adequately predictive (i.e. the measured value at the end of the experiment is within the confidence region) or conservative (i.e. the worst case model overestimates mortality, Figs 2 and S1–S4 in SI).

A meta-analysis of existing, suitable datasets16,20,31,32 should be conducted to assess how well GUTS can forecast survival. Current guidance documents for environmental risk assessment of chemicals mention toxicokinetic-toxicodynamic models, such as GUTS, as a potentially useful method24,33. Educated forecasting requires mechanistic models, but more research is needed to establish how well the mechanisms in GUTS are able to provide sufficient predictive power. It is particularly worth investigating if toxicodynamic parameter values estimated from short term tests also apply to longer exposure durations. This is because toxicodynamic parameters reflect the toxic mode of action20, hence forecasting survival assumes the same toxic mode of action in short and longer exposures.

Study 3: Interspecies variability of chemically-induced effects

Species sensitivity distributions (SSDs) are used to describe differences in sensitivity among species to a given chemical34,35,36,37. In case of mortality data, for each species, the concentration at which 50% of the tested individuals die under constant exposure and a given test duration (LC50 values), are plotted. This distribution represents the variability of species sensitivity within the studied taxonomic group, covering not only the species tested in the laboratory but also other species for which no data is available. The theoretical concentration affecting 5% of the species (HC5, Fig. 4) can be extracted from this distribution and is used in environmental risk assessment. Classical LC50 data (i.e. derived under constant exposure) may not be appropriate for environmental situations with time-varying exposure concentrations because they ignore the dynamics of exposure and effects and focus on cumulated effects at a single time point of the experiment (typically test termination)38,39. GUTS models allow estimating LC50 values that account for time-varying exposure and for how toxicity changes over time3,39,40. With that approach, time-varying exposure and effect patterns can be addressed more realistically. Since GUTS can predict any percent mortality (e.g. LC10), at any time point and for any given exposure profile, exposure-specific SSDs can be constructed when parameterized GUTS models are available for a sufficient number of species (e.g. a minimum of five to eight species is required in environmental risk assessment for vertebrates and invertebrates, respectively). We illustrate this new approach for building model-based SSDs using five vertebrate species exposed to malathion (Fig. 4).

Figure 4
figure 4

Species sensitivity distributions estimated for three exposure scenarios in computational experiments based on the toxicokinetic-toxicodynamic assumptions of scaled internal concentration: (A) stochastic death and (B) individual tolerance. The two x-axes correspond to the values of time weighted average (TWA) and maximum exposure (PECmax) concentrations for malathion.


We collected survival data for five vertebrate species exposed to malathion, i.e. Poecilia reticulata41, Rana sylvatica42, Clarius gariepinus43, Rana catesbeiana44, Pimephales promelas 45, and used it for model calibration. We calibrated GUTS -SD and GUTS -IT models with scaled internal concentration as the dose metric (see Tables S16 and S17, Figs S5 and S6 in SI). Then we used the models to calculate 14-day LC50s for constant exposure and for two different pulse exposure scenarios (single and double pulses). These LC50 values were then used as input data for the SSD calculations. In order to construct the SSD, effects in a given species (as represented by its LC50 value) need to be statistically related to exposure (i.e. concentration in water), for which different surrogates may be used. In this study, LC50 values were related to exposure using either the maximum predicted exposure concentration (PECmax) or the time weighted average (TWA)24. The SSD was obtained by statistical fitting to the LC50 data for a given exposure surrogate, and the corresponding HC5 (5% percentile of the distribution) was estimated. This work was repeated for (i) LC50 values generated either with GUTS-IT or GUTS-SD, (ii) the two selected exposure surrogates and (iii) various exposure patterns: constant or pulsed exposure (Fig. 4).


We evaluated the impact of the chosen GUTS model, concentration surrogate and exposure pattern on the SSDs and corresponding HC5 values. The HC5 estimates differed among exposure scenarios, among exposure concentration surrogates (TWA and PECmax) and between GUTS- IT and GUTS- SD (Fig. 4). For a given GUTS model, the HC5 estimates at constant exposure are identical when calculated based on TWA and PECmax. With pulsed exposure patterns, the HC5 calculated based on the TWA increases with the number of pulses, whereas it decreases when PECmax is used. In this example for malathion and five vertebrate species, the same time weighted average concentration but different temporal profiles lead to different SSDs and thus HC5 estimates; the constant exposure is less toxic than the shorter but higher equivalent pulse exposure. The GUTS-SD model predicts that two species swap ranks in the SSD depending on the exposure type. For constant exposure Rana sylvatica is predicted to be more sensitive than Clarias gariepinus, whereas for pulsed exposures it is the other way round (Fig. 4A). Also the SSDs differ between GUTS-SD, where Poecilia reticulata is the most sensitive species (Fig. 4A), and GUTS-IT (Fig. 4B) where Clarias gariepinus is the most sensitive species.


All these results arise from the interplay of exposure, toxicokinetics and toxicodynamics and cannot easily be generalized to other combinations of species and chemicals. A mechanistic interpretation of the GUTS model parameters (Tables S16 and S17) can help to explain our observations, but requires further, systematic investigations before we can draw general conclusions. We present a method combining mechanistic modelling with a statistical approach (SSD fitting) for assessing the changes in SSDs in response to changes in the exposure scenario, more specifically for time-varying stressor intensities. In this example, the GUTS- SD implementation resulted in higher HC5 estimates than those derived from the GUTS -IT, but this cannot be generalized. Either GUTS -IT or GUTS -SD can result in stronger effects compared to its respective counterpart21, because the outcomes (SSD and HC5 values) depend on the intrinsic properties of the two toxicodynamic assumptions (IT or SD)20 and the characteristics of the exposure profile21. We do not know how the mechanisms of toxicity and the choice of species influence survival predictions across different exposure patterns, but suspect all three aspects (chemical, species, exposure pattern) are intricately linked.

Our modelling suggests that differences in species responses for various exposure scenarios can lead to differences in the ranking of the species in the SSD and also in the estimated HC5 values (Fig. 4) when the exposure concentration is not constant. Thus, when toxicity is assessed for time-varying exposure concentrations, the data analysis needs to account for the possibility that species may differ in their responses to different exposure patterns. Further studies should investigate whether such a dependence of SSDs on exposure regimes can also be found for other species and chemicals and seek experimental confirmation of our modelling results. This study suggests that the temporal pattern of exposure needs to be considered when interpreting the results of an SSD where exposure is not constant. Importantly, the SSD and associated HC5 estimate could differ for exposures with the same time weighted average concentration but different temporal profiles (i.e. reciprocity or Haber’s law do not apply).

The proposed method for building SSDs allows assessing risks of untested exposure patterns based on standard datasets for a range of species. We suggest that the approach could be used in future environmental risk assessments of chemicals to derive species sensitivity distributions for more realistic exposure patterns, such as FOCUS surface water scenarios46 or measured concentration time series47. The GUTS model framework offers the possibility to derive reliable effect measures such as the HC5 for untested exposure scenarios, to quantify uncertainties, and has the potential for cross species extrapolation.

We did not attempt to explain the species sensitivity differences by taking advantage of the biological interpretation of GUTS parameters. Some studies hypothesized that TKTD model parameters, such as those of GUTS models, could be combined with species traits or phylogenetic information to explain and predict species sensitivity differences48,49. Species traits such as metabolic rate, which scales with size50, correlated with the threshold parameter for a small set of chemicals51 and the dominant rate constant could be related to the size of three different species52. These two examples suggest that predictions of species sensitivity based on phylogeny49,53,54 could be refined to predict GUTS parameters as proxy for sensitivity. Such new statistical models should then be tested on a wide range of species and chemicals. The hope is that predictions can be made for untested species based on correlations between species traits and TKTD parameters48,55. Building these predictive models requires that the parameters involved have a biological meaning and that the parameters can be linked to quantifiable traits/quantities. For this purpose, the GUTS models based on scaled internal concentration might be inappropriate, as scaled internal concentration cannot be directly measured and lumps very different processes, e.g. chemical elimination and damage repair3. Both elimination and damage recovery processes may have a strong impact on an organism’s survival to a degree depending on the properties of the chemical and species tested. However, they are likely linked to very different species traits. Therefore it is important to differentiate between toxicokinetics and toxicodynamics20 when building inter-species toxicity extrapolation models53,56, for example by using internal concentrations as a driving variable and scaled damage as a dose metric (Table 1). This approach may provide better opportunities to develop a trait-based predictive framework for ecotoxicity48.


GUTS models have already been applied to predict survival under time-varying exposure16,21, model starvation resistance57, model combined effects of toxicity and starvation58, represent temporal variation in toxicity in an individual-based model22,59, link temporal biomarker response to survival60, model survival of gill cells in vitro61, map toxicodynamic parameters in chemical space20,62, approximate toxicodynamic recovery times20 and investigate sensitivity differences between species52,63,64 and life-stages52,65,66.

The commonly asked question in survival analysis is how a stressor affects survival over time and how we could predict it. We found that forecasting survival across different exposure patterns does not necessarily require internal concentrations. Instead, measured or modelled external concentrations can be used as driving variables in conjunction with scaled internal concentrations as a dose metric16,21. GUTS survival forecasts can help bridge the gap between laboratory and field situations and make environmental risk assessment of chemicals more relevant and realistic67,68,69. Importantly our results show the interdependence of species sensitivity and exposure patterns, which calls not only for a systematic investigation but also a stronger integration of exposure and effect assessments.

Some questions, for example why species differ in their sensitivity to chemicals, may require a more detailed approach than using scaled internal concentrations as a dose metric. Here, the GUTS framework offers a consistent set of models and equations for separate quantification of toxicokinetics and toxicodynamics. To achieve that, measured or modelled internal concentrations can be used in conjunction with scaled internal damage20. The resulting toxicodynamic parameter values can be linked to chemical class20,62, but also toxicodynamic modelling is the organism level equivalent of quantitative adverse outcome pathways70. Here, the GUTS framework offers a starting point to develop similarly coherent toxicokinetic-toxicodynamic models for sub-lethal endpoints.

The GUTS framework enables us to analyze situations where the stressor intensity changes over time and this can also be applied to questions beyond toxicology, for example in medicine or engineering. GUTS models also allow the quantification of the deterministic and stochastic component of death or failure or occurrence of an event. We expect that a wide range of scientific questions could benefit from applying GUTS and hope that our analysis, from an ecotoxicology perspective, can serve as a blueprint for other fields of science. To facilitate further studies we provide extensive model code and software (

Additional Information

How to cite this article: Ashauer, R. et al. Modelling survival: exposure pattern, species sensitivity and uncertainty. Sci. Rep. 6, 29178; doi: 10.1038/srep29178 (2016).


  1. Chew, R. D. & Hamilton, M. A. Toxicity curve estimation - Fitting a compartment model to median survival times. Trans. Am. Fish. Soc. 114, 403–412 (1985).

    CAS  Article  Google Scholar 

  2. Bliss, C. I. The method of probits. Science 79, 38–39 (1934).

    CAS  ADS  Article  Google Scholar 

  3. Jager, T., Albert, C., Preuss, T. G. & Ashauer, R. General Unified Threshold Model of Survival - a Toxicokinetic-Toxicodynamic Framework for Ecotoxicology. Environ. Sci. Technol. 45, 2529–2540 (2011).

    CAS  ADS  Article  Google Scholar 

  4. Newman, M. C. & Unger, M. A. Fundamentals of Ecotoxicology. 2nd edn, (Lewis Publishers, 2003).

  5. Garrett, K. A., Madden, L. V., Hughes, G. & Pfender, W. F. New applications of statistical tools in plant pathology. Phytopathology 94, 999–1003 (2004).

    CAS  Article  Google Scholar 

  6. Carnes, B. A., Holden, L. R., Olshansky, S. J., Witten, M. T. & Siegel, J. S. Mortality partitions and their relevance to research on senescence. Biogerontology 7, 183–198 (2006).

    Article  Google Scholar 

  7. Gavrilov, L. A. & Gavrilova, N. S. The reliability theory of aging and longevity. Journal of Theoretical Biology 213, 527–545 (2001).

    CAS  MathSciNet  Article  Google Scholar 

  8. Ceconi, C. et al. Chromogranin A in heart failure: A novel neurohumoral factor and a predictor for mortality. European Heart Journal 23, 967–974 (2002).

    CAS  Article  Google Scholar 

  9. Selvin, S. Survival analysis for epidemiologic and medical research: A practical guide. (2008).

  10. Mihaylova, B. et al. The effects of lowering LDL cholesterol with statin therapy in people at low risk of vascular disease: Meta-analysis of individual data from 27 randomised trials. The Lancet 380, 581–590 (2012).

    CAS  Article  Google Scholar 

  11. Lu, H., Kolarik, W. J. & Lu, S. S. Real-time performance reliability prediction. IEEE Transactions on Reliability 50, 353–357 (2001).

    Article  Google Scholar 

  12. Au, S. K. & Beck, J. L. Estimation of small failure probabilities in high dimensions by subset simulation. Probabilistic Engineering Mechanics 16, 263–277 (2001).

    Article  Google Scholar 

  13. Box-Steffensmeier, J. M., Reiter, D. & Zorn, C. Nonproportional hazards and event history analysis in international relations. Journal of Conflict Resolution 47, 33–53 (2003).

    Article  Google Scholar 

  14. Guo, G. Event-history analysis for left-truncated data. Sociological Methodology 23, 217–243 (1993).

    CAS  Article  Google Scholar 

  15. Ashauer, R. & Brown, C. D. Toxicodynamic assumptions in ecotoxicological hazard models. Environ. Toxicol. Chem. 27, 1817–1821 (2008).

    CAS  Article  Google Scholar 

  16. Nyman, A.-M., Schirmer, K. & Ashauer, R. Toxicokinetic-toxicodynamic modelling of survival of Gammarus pulex in multiple pulse exposures to propiconazole: model assumptions, calibration data requirements and predictive power. Ecotoxicology 21, 1828–1840 (2012).

    CAS  Article  Google Scholar 

  17. Berkson, J. Why I prefer logits to probits. Biometrics 7, 327–339 (1951).

    Article  Google Scholar 

  18. Newman, M. C. & McCloskey, J. T. The individual tolerance concept is not the sole explanation for the probit dose-effect model. Environ. Toxicol. Chem. 19, 520–526 (2000).

    CAS  Google Scholar 

  19. Zhao, Y. & Newman, M. C. The theory underlying dose-response models influences predictions for intermittent exposures. Environ. Toxicol. Chem. 26, 543–547 (2007).

    CAS  Article  Google Scholar 

  20. Ashauer, R., O’Connor, I., Hintermeister, A. & Escher, B. I. Death Dilemma and Organism Recovery in Ecotoxicology. Environ. Sci. Technol. 49, 10136–10146 (2015).

    CAS  ADS  Article  Google Scholar 

  21. Ashauer, R., Thorbek, P., Warinton, J. S., Wheeler, J. R. & Maund, S. A method to predict and understand fish survival under dynamic chemical stress using standard ecotoxicity data. Environ. Toxicol. Chem. 23, 954–965 (2013).

    Article  Google Scholar 

  22. Gabsi, F., Hammers-Wirtz, M., Grimm, V., Schäffer, A. & Preuss, T. G. Coupling different mechanistic effect models for capturing individual- and population-level effects of chemicals: Lessons from a case where standard risk assessment failed. Ecol. Model. 280, 18–29 (2014).

    CAS  Article  Google Scholar 

  23. Albert, C., Ashauer, R., Künsch, H. R. & Reichert, P. Bayesian Experimental Design for a Toxicokinetic-Toxicodynamic Model. J. Stat. Plann. Inference 142, 263–275 (2012).

    MathSciNet  Article  Google Scholar 

  24. EFSA P. P. R. Panel. Guidance on tiered risk assessment for plant protection products for aquatic organisms in edge-of-field surface waters. EFSA Journal 11, 268 pp. (2013).

    Google Scholar 

  25. van Leeuwen, C. J. & Vermeire, T. G. 686 (Springer, Dordrecht, The Netherlands, 2007).

  26. Bureau, E. C. Technical Guidance Document on Risk Assessment. (European Commission, Brussels, 2003).

  27. Ashauer, R., Hintermeister, A., Potthoff, E. & Escher, B. I. Acute toxicity of organic chemicals to Gammarus pulex correlates with sensitivity of Daphnia magna across most modes of action. Aquat. Toxicol. 103, 38–45 (2011).

    CAS  Article  Google Scholar 

  28. Jager, T. Reconsidering sufficient and optimal test design in acute toxicity testing. Ecotoxicology 23, 38–44 (2014).

    CAS  Article  Google Scholar 

  29. Moerbeek, M., Piersma, A. H. & Slob, W. A Comparison of Three Methods for Calculating Confidence Intervals for the Benchmark Dose. Risk Anal. 24, 31–40 (2004).

    Article  Google Scholar 

  30. Meeker, W. Q. & Escobar, L. A. Teaching about approximate confidence-regions based on maximum-likelihood-estimation. Am. Stat. 49, 48–53 (1995).

    Google Scholar 

  31. Ashauer, R., Boxall, A. B. A. & Brown, C. D. New ecotoxicological model to simulate survival of aquatic invertebrates after exposure to fluctuating and sequential pulses of pesticides. Environ. Sci. Technol. 41, 1480–1486 (2007).

    CAS  ADS  Article  Google Scholar 

  32. Ashauer, R., Boxall, A. B. A. & Brown, C. D. Simulating toxicity of carbaryl to Gammarus pulex after sequential pulsed exposure. Environ. Sci. Technol. 41, 5528–5534 (2007).

    CAS  ADS  Article  Google Scholar 

  33. Panel, E. P. Scientific Opinion on good modelling practice in the context of mechanistic effect models for risk assessment of plant protection products. EFSA Journal 12, 3589–3681 (2014).

    Google Scholar 

  34. Kooijman, S. A. L. M. A safety factor for LC50 values allowing for differences in sensitivity among species. Water Res. 21, 269–276 (1987).

    CAS  Article  Google Scholar 

  35. Posthuma, L., Suter, G. W. II & Traas, T. P. In Environmental and Ecological Risk Assessment (ed Michael C. Newman ) 587 (Lewis Publishers, Boca Raton, 2002).

  36. Solomon, K. R. et al. Ecological risk assessment of atrazine in north american surface waters. Environ. Toxicol. Chem. 15, 31–76 (1996).

    CAS  Article  Google Scholar 

  37. Maltby, L., Blake, N., Brock, T. C. M. & Van Den Brink, P. J. Insecticide species sensitivity distributions: Importance of test species selection and relevance to aquatic ecosystems. Environ. Toxicol. Chem. 24, 379–388 (2005).

    CAS  Article  Google Scholar 

  38. Laskowski, R. Some good reasons to ban the use of NOEC, LOEC and related concepts in ecotoxicology. Oikos 73, 140–144 (1995).

    Article  Google Scholar 

  39. Jager, T. Some Good Reasons to Ban ECx and Related Concepts in Ecotoxicology. Environ. Sci. Technol. 45, 8180–8181 (2011).

    CAS  ADS  Article  Google Scholar 

  40. Fox, D. R. & Billoir, E. Time-dependent species sensitivity distributions. Environ. Toxicol. Chem. 32, 378–383 (2013).

    CAS  Article  Google Scholar 

  41. De Bruijn, J. & Hermens, J. Qualitative and quantitative modelling of toxic effects of organophosphorous compounds to fish. Sci. Total Environ. 109–110, 441–455 (1991).

    Article  Google Scholar 

  42. Krishnamurthy, S. V. & Smith, G. R. Combined effects of malathion and nitrate on early growth, abnormalities, and mortality of wood frog (Rana sylvatica) tadpoles. Ecotoxicology 20, 1361–1367 (2011).

    CAS  Article  Google Scholar 

  43. Ahmad, Z. Toxicity bioassay and effects of sub-lethal exposure of malathion on biochemical composition and haematological parameters of Clarias gariepinus . African Journal of Biotechnology 11, 8578–8585 (2012).

    CAS  Google Scholar 

  44. Fordham, C. L., Tessari, J. D., Ramsdell, H. S. & Keefe, T. J. Effects of malathion on survival, growth, development, and equilibrium posture of bullfrog tadpoles (Rana catesbeiana). Environ. Toxicol. Chem. 20, 179–184 (2001).

    CAS  Article  Google Scholar 

  45. Geiger, D. L., Call, D. J. & Brooke, L. T. Acute toxicities of organic chemicals to fathead minnow (Pimephales promelas). Volume IV. (University of Wisconsin-Superior, Superior, Wisconsin, USA, 1988).

  46. FOCUS. FOCUS Surface Water Scenarios in the EU Evaluation Process under 91/414/EEC. 1-238 (European Commission, Health & Consumer Protection Diretorate-General, Brussel, Belgium, 2001).

  47. Wittmer, I. K. et al. Significance of urban and agricultural land use for biocide and pesticide dynamics in surface waters. Water Res. 44, 2850–2862 (2010).

    CAS  Article  Google Scholar 

  48. Rubach, M. N. et al. Framework for traits-based assessment in ecotoxicology. Integrated Environmental Assessment and Management 7, 172–186 (2011).

    Article  Google Scholar 

  49. Buchwalter, D. B. et al. Aquatic insect ecophysiological traits reveal phylogenetically based differences in dissolved cadmium susceptibility. Proc. Natl. Acad. Sci. USA 105, 8321–8326 (2008).

    CAS  ADS  Article  Google Scholar 

  50. Kooijman, S. A. L. M. Waste to hurry: dynamic energy budgets explain the need of wasting to fully exploit blooming resources. Oikos 122, 348–357 (2013).

    Article  Google Scholar 

  51. Baas, J. & Kooijman, S. Sensitivity of animals to chemical compounds links to metabolic rate. Ecotoxicology 24, 657–663 (2015).

    CAS  Article  Google Scholar 

  52. Gergs, A., Kulkarni, D. & Preuss, T. G. Body size-dependent toxicokinetics and toxicodynamics could explain intra- and interspecies variability in sensitivity. Environ. Pollut. 206, 449–455 (2015).

    CAS  Article  Google Scholar 

  53. Poteat, M. D. & Buchwalter, D. B. Phylogeny and Size Differentially Influence Dissolved Cd and Zn Bioaccumulation Parameters among Closely Related Aquatic Insects. Environ. Sci. Technol. 48, 5274–5281 (2014).

    CAS  ADS  Article  Google Scholar 

  54. Guénard, G., Carsten von der Ohe, P., Carlisle Walker, S., Lek, S. & Legendre, P. Using phylogenetic information and chemical properties to predict species tolerances to pesticides. Proceedings of the Royal Society of London B: Biological Sciences 281 (2014).

  55. Rubach, M. et al. Species traits as predictors for intrinsic sensitivity of aquatic invertebrates to the insecticide chlorpyrifos. Ecotoxicology 21, 2088–2101 (2012).

    CAS  Article  Google Scholar 

  56. Raimondo, S., Jackson, C. R. & Barron, M. G. Influence of taxonomic relatedness and chemical mode of action in acute interspecies estimation models for aquatic species. Environmental Science and Technology 44, 7711–7716 (2010).

    CAS  ADS  Article  Google Scholar 

  57. Gergs, A. & Jager, T. Body size-mediated starvation resistance in an insect predator. J. Anim. Ecol. 83, 758–768 (2014).

    Article  Google Scholar 

  58. Nyman, A.-M., Hintermeister, A., Schirmer, K. & Ashauer, R. The Insecticide Imidacloprid Causes Mortality of the Freshwater Amphipod Gammarus pulex by Interfering with Feeding Behavior. PLoS ONE 8, e62472 (2013).

    CAS  ADS  Article  Google Scholar 

  59. Gergs, A., Zenker, A., Grimm, V. & Preuss, T. G. Chemical and natural stressors combined: From cryptic effects to population extinction. Scientific Reports 3 (2013).

  60. Jager, T. & Hansen, B. H. Linking survival and biomarker responses over time. Environ. Toxicol. Chem. 32, 1842–1845 (2013).

    CAS  Article  Google Scholar 

  61. Stadnicka-Michalak, J., Schirmer, K. & Ashauer, R. Toxicology across scales: Cell population growth in vitro predicts reduced fish growth. Sci. Adv. 1, 1–8 (2015).

    Article  Google Scholar 

  62. Jager, T. & Kooijman, S. A. L. M. A biology-based approach for quantitative structure-activity relationships (QSARs) in ecotoxicity. Ecotoxicology 18, 187–196 (2009).

    CAS  Article  Google Scholar 

  63. Beaudouin, R., Zeman, F. A. & Péry, A. R. R. Individual sensitivity distribution evaluation from survival data using a mechanistic model: Implications for ecotoxicological risk assessment. Chemosphere 89, 83–88 (2012).

    CAS  ADS  Article  Google Scholar 

  64. Kon Kam King, Delignette-Muller, G., Kefford, M. L., Piscart, B. J. C. & Charles, S. Constructing Time-Resolved Species Sensitivity Distributions Using a Hierarchical Toxico-Dynamic Model. Environ. Sci. Technol. 49, 12465–12473 (2015).

    CAS  ADS  Article  Google Scholar 

  65. Kulkarni, D., Daniels, B. & Preuss, T. G. Life-stage-dependent sensitivity of the cyclopoid copepod Mesocyclops leuckarti to triphenyltin. Chemosphere 92, 1145–1153 (2013).

    CAS  ADS  Article  Google Scholar 

  66. Jager, T., Altin, D., Miljeteig, C. & Hansen, B. H. Stage-dependent and sex-dependent sensitivity to water-soluble fractions of fresh and weathered oil in the marine copepod Calanus finmarchicus. Environ. Toxicol. Chem. 35, 728–735 (2016).

    CAS  Article  Google Scholar 

  67. Forbes, V. E. & Galic, N. Next-generation ecological risk assessment: Predicting risk from molecular initiation to ecosystem service delivery. Environ. Int. 91, 215–219 (2016).

    CAS  Article  Google Scholar 

  68. SCHER (Scientific Committee on Health and Environmental Risks), SCENIHR (Scientific Committee on Emerging and Newly Identified Health Risks) & SCCS (Scientific Committee on Consumer Safety). Making Risk Assessment More Relevant for Risk Management. (European Commission Brussels, 2013).

  69. SCENIHR (Scientific Committee on Emerging and Newly Identified Health Risks), SCHER (Scientific Committee on Health and Environmental Risks) & SCCS (Scientific Committee on Consumer Safety). Addressing the New Challenges for Risk Assessment. (European Commission, Brussels, 2012).

  70. Groh, K. J. et al. Development and application of the adverse outcome pathway framework for understanding and predicting chronic toxicity: I. Challenges and research needs in ecotoxicology. Chemosphere 120, 764–777 (2015).

    CAS  ADS  Article  Google Scholar 

Download references


We thank Anita Hintermeister for carrying out experiments with G. pulex. We are grateful for financial support of the 2nd international workshop on toxicokinetic-toxicodynamic modelling by the European Crop Protection Association (ECPA). We thank the Swiss Federal Office of the Environment for funding those experiments (FOEN, grants 09.033.PJ/I362-1602 and 09.0012.PJ). Contributions of Andreas Focks and Paul van den Brink have been financed by the Dutch Ministry of Economic Affairs (BO-20-002-001). The contribution of Benoit Goussen has been financed by Unilever (MA-2014-00701). Contributions of Virginie Ducrot and Thomas G. Preuss have been financed by Bayer AG.

Author information

Authors and Affiliations



All authors (R.A., C.A., S.A., N.C., S.C., V.D., A.F., F.G., A.G., B.G., T.J., N.I.K., A.-M.N., V.P., S.R., R.B.S., P.J.V.d.B., K.V., S.V., E.I.Z. and T.G.P.) contributed to the case studies and writing of the manuscript and have given approval to the final version of the manuscript.

Corresponding author

Correspondence to Roman Ashauer.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Ashauer, R., Albert, C., Augustine, S. et al. Modelling survival: exposure pattern, species sensitivity and uncertainty. Sci Rep 6, 29178 (2016).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing