Formation and characteristics of biomimetic mineralo-organic particles in natural surface water

Article metrics


Recent studies have shown that nanoparticles exist in environmental water but the formation, characteristics and fate of such particles remain incompletely understood. We show here that surface water obtained from various sources (ocean, hot springs, and soil) produces mineralo-organic particles that gradually increase in size and number during incubation. Seawater produces mineralo-organic particles following several cycles of filtration and incubation, indicating that this water possesses high particle-seeding potential. Electron microscopy observations reveal round, bacteria-like mineral particles with diameters of 20 to 800 nm, which may coalesce and aggregate to form mineralized biofilm-like structures. Chemical analysis of the particles shows the presence of a wide range of chemical elements that form mixed mineral phases dominated by calcium and iron sulfates, silicon and aluminum oxides, sodium carbonate, and iron sulfide. Proteomic analysis indicates that the particles bind to proteins of bacterial, plant and animal origins. When observed under dark-field microscopy, mineral particles derived from soil-water show biomimetic morphologies, including large, round structures similar to cells undergoing division. These findings have important implications not only for the recognition of biosignatures and fossils of small microorganisms in the environment but also for the geochemical cycling of elements, ions and organic matter in surface water.


Nanomaterials have received widespread attention in recent years due to their possible technological and biomedical applications1. Nanoparticles (NPs) not only show enhanced reactivity and penetration in human tissues but they may also have characteristics that differ from the properties of the corresponding bulk material2. For these reasons, concerns over the safety and environmental repercussions of these nanomaterials have been the subject of intense debates. Current research initiatives aim to identify the NPs found in the environment and assess the possible effects of such nanomaterials on human health.

While some NPs found in the environment are synthetic or anthropogenic in origin, the major part of such NPs is the results of natural processes3,4. Natural NPs have indeed been found in the air, soil and water throughout the environment5. These NPs and colloids originate mainly from the decomposition of organic matter and chemical weathering of rocks4. The main organic chemicals found in surface water particles are humic matter, peptides, proteins, peptidoglycans and polysaccharides while their major mineral components consist of silicates, oxides and hydroxides containing iron, manganese and aluminum6. Formation of mineral NPs may produce turbidity and affect drinking water quality, a phenomenon that may cause gastrointestinal illnesses and toxicity if the water is not properly treated or if the particles are found in the water following treatment7,8,9. Yet, our understanding of the formation, characteristics and fate of such particles in surface water environments is incomplete.

We observed earlier that mineral NPs form in body fluids of humans and animals10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26. These mineral NPs were initially thought to represent nanobacteria, a putative microorganism described as the smallest form of life and the cause of several human diseases, including atherosclerosis, cancer, and kidney stones27,28,29,30. On the other hand, our work has shown that these NPs actually represent non-living mineral particles that mimic living microorganisms in various ways, including by their increase in size and number in culture11,17, their binding to biological molecules (carbohydrates, lipids, metabolites, nucleotides, and proteins)11,12,13,16,20,22,26, and by assuming biomimetic morphologies10,18. The conclusion that nanobacteria represent non-living mineral particles is supported by several studies performed by other authors31,32,33. Notably, the same NPs have been shown to form in the human body22,25 and may represent precursors of calcification that induce innate immune reactions when they aggregate and form large mineral particles (>1 μm)19,22. Similarly, Jahnen-Dechent and colleagues have shown that mineral nanoparticles, which this group calls “calciprotein particles”, form in human body fluids34,35 and that serum proteins such as fetuin-A may play a role in the formation of such particles in the body36,37.

In the present study, we examine the possibility that biomimetic mineralo-organic NPs may also exist in natural surface water. We show that particles form in environmental waters obtained from the Pacific Ocean (seawater), natural hot springs, and soil. The particles increase in size and number in culture and produce morphologies that are highly reminiscent of living microorganisms. Our results show that these biomimetic particles consist of non-living mineral phases that incorporate trace elements and proteins, suggesting that these entities may play a role in the circulation and availability of minerals and organic molecules in the environment.


Formation of particles in seawater

To examine whether mineral particles may spontaneously form in natural surface water, we collected seawater off the shores of Northern Taiwan and submitted the water samples to chemical analysis (see Supplementary Table S1). As expected, seawater showed high salinity (19,409‰) and electrical conductivity (EC; 38,005 μS/cm) and was slightly alkaline (pH 7.97). The main chemical elements and ions included sodium (Na), sulfate (SO4), calcium (Ca), and magnesium (Mg). Besides, seawater contained relatively low amounts of dissolved organic carbon (DOC; 0.547 ppm).

We incubated the water samples at room temperature with gentle shaking for one week. In addition to seawater in its native state, we also used water filtered through either 0.45-μm or 0.22-μm pore membranes to remove particulate matter. Dynamic light scattering (DLS) analysis was used to monitor particle size and number during incubation (Fig. 1; particle numbers were expressed as relative particle units based on observations made in our previous studies17,24). While particle size and number slightly increased in unfiltered water after one week (Fig. 1A,B), the increase was not statistically significant, possibly due to the presence of particulate matter in unfiltered seawater prior to incubation. In comparison, seawater that had been filtered through either 0.45-μm or 0.22-μm pore membranes showed statistically-significant increase of particle size and number with time (Fig. 1A,B). These results suggest that seawater produces time-dependent particle formation during incubation.

Figure 1: Formation of particles in unfiltered and filtered seawater.

Seawater obtained off the shores of Northern Taiwan (see Methods) was incubated with gentle shaking at room temperature for the time indicated. Particle size (A) and particle number or relative particle unit (B) was monitored using dynamic light scattering (DLS). For comparison, seawater that had been filtered through 0.45-μm or 0.22-μm pore membranes was incubated and analyzed using DLS. Black stars indicate statistically significant results vs. time 0 (p < 0.05). See the text for more details.

Particle-seeding potential of seawater

To examine the possibility that seawater may contain a large reservoir of ions or compounds that form particles, we submitted seawater to repeated cycles of filtration through 0.45-μm pore membranes followed by incubation at room temperature to induce particle formation. After filtration, particle size and number suddenly decreased and approached zero as revealed by DLS analysis (Fig. 2A,B, F1), indicating that filtration efficiently removed the bulk of particles from the solution. Particle size rapidly increased following incubation of filtered seawater, and remained relatively stable for one week (Fig. 2A, 0–168 hrs). A second filtration (F2) again led to a sharp decrease of particle size (Fig. 2A). Notably, this cycle of filtration and particle growth could be repeated at least nine times (Fig. 2A, F1–F9), with a slight reduction in particle size being noticed with each cycle (Fig. 2A, F1–F9).

Figure 2: Particle-seeding potential of seawater after successive filtration-incubation cycles.

Seawater was filtered through 0.45-μm pore membranes (inverted black triangles labeled F1 to F9 indicate filtration), prior to incubation at room temperature for the time indicated. Particle size (A) and number (B) was monitored using DLS. Notice the increase of particle size and number following each filtration-incubation cycle. While particles appeared to gradually decrease in size with each filtration-incubation cycle (A), particle number tended to slightly increase during this period (B).

Upon incubation, particle number rapidly increased in filtered seawater (Fig. 2B, 0–168 hrs), similar to the particle number increases observed in Fig. 1B. Similar to the analysis of particle size described above (Fig. 2A), the cycle of particle number increase following successive filtration and incubation could be repeated nine times (Fig. 2B). In contrast to the changes observed for particle size, however, particle number slightly increased with each filtration-incubation cycle, reaching higher peak values after the 8th and 9th filtrations (Fig. 2B). These results indicate that seawater contains relatively high particle-seeding potential.

Formation of particles in hot spring and soil waters

In order to verify that particle seeding is not limited to seawater, we also tested water obtained from hot springs in the Northern region of Taiwan. Hot spring water was collected from various locations associated with either carbonated water (i.e., Jiaoxi hot spring, Wulai hot spring) or sulfur-containing water (i.e., Yangmingshan National Park, abbreviated thereafter as YMS). Chemical analysis of hot spring water showed that Jiaoxi and Wulai water possessed comparable characteristics, whereas YMS water was more acidic (pH 2.99) and contained high DOC and sulfate levels (14,415 ppm and 410 ppm, respectively; Supplementary Table S1).

We incubated the spring water specimens at room temperature, prior to DLS analysis at regular interval (Fig. 3). Our results showed that unfilterated spring water did not produce significant particle size increase following incubation, except for Jiaoxi spring water which showed statistically significant particle size increase (Fig. 3). Following filtration, spring water from the three locations showed statistically significant particle size increases after one week, except for Wulai spring water filtered through 0.45-μm pore filter (Fig. 3).

Figure 3: Formation of particles in natural hot spring water.

Water obtained from natural hot springs located in Jiaoxi, Wulai and Yangmingshan (YMS) National Park (Northern Taiwan) was incubated at room temperature for the time indicated and particle size was monitored using DLS. In some experiments, water was filtered through 0.45-μm or 0.22-μm pore membranes as indicated, prior to incubation. Black stars indicate statistically significant results vs. time 0 (p < 0.05).

We also prepared a soil water extract in order to evaluate the particle seeding capacity of water that may percolate through soil. In this case, soil material was incubated with double distilled water, prior to centrifugation and filtration steps to remove undissolved soil material (see Methods). Incubation of unfiltered or filtered (0.45 μm and 0.22 μm) soil water did not produce statistically significant particle size increase after one week (Fig. 4A). This observation may be due to the presence of residual particulate matter in the prepared soil water (as the solution remained cloudy even after filtration). On the other hand, chelation of ions by organic molecules and a low level of free ions in solution may also contribute to the absence of particle formation observed in this particular soil extract. In order to evaluate this possibility, we added sodium chloride (NaCl; 0.9% w/v) to the soil water extract before incubating the mixture at room temperature for one week. After incubation, no particle size increase was noted for unfiltered soil water + NaCl; in contrast, statistically significant particle size increases were noted for both 0.45-μm and 0.2-μm filtered soil water samples in which NaCl had been added (Fig. 4B). These observations indicate that hot spring water produces particles upon incubation, whereas soil water do so only when ions are added into the solution.

Figure 4: Formation of mineral particles in soil water following addition of NaCl.

Soil water was prepared by mixing soil with double distilled water as described in Methods. The solution was centrifuged at 120000 g for 2 hrs at 4 °C and the supernatant was used as such (“Unfiltered”) or filtered through either 0.45-μm or 0.22-μm-pore membranes as indicated. Soil water was incubated at room temperature for the time indicated. Particle size was determined using DLS. In (B) NaCl (0.9%) was added to soil water prior to incubation. Black stars indicate statistically significant results vs. time 0 (p < 0.05). Notice that soil water alone did not lead to statistically significant particle formation (A), unless the solution was filtered and NaCl was added (B).

Morphology and chemical analysis of water-derived particles

To examine the morphology and ultrastructure of the particles formed in surface water, we collected particles formed after one week of incubation and observed the samples under transmission electron microscopy (TEM) without fixation or staining (Fig. 5). The particles that formed in seawater, spring water and soil water showed round, oval or irregular morphologies with diameters ranging between 20 nm and 800 nm (Fig. 5A–F). The particles showed a round surface and tended to aggregate, resembling coccoid bacteria that aggregated to form colonies (Fig. 5A–F, insets; see also the structures resembling bacteria undergoing cellular division in Fig. 5E). Some samples formed film-like structures (Fig. 5A,C,D,F).

Figure 5: Transmission electron microscopy observations of mineral particles formed in surface waters.

Seawater, hot spring water and soil water was filtered through 0.22-μm pore membranes prior to incubation at room temperature for one week as described in Methods. One-week old samples were centrifuged at 120000 g for 2 hrs at 4 °C and the resulting pellets were prepared for TEM observations without fixation or staining. EDX analysis was performed on the particles visualized under TEM. Nickel (Ni) peaks were mainly attributed to the nickel grids used as support for this analysis.

We used energy-dispersive X-ray spectroscopy (EDX) to identify the main chemical elements found in the particles (Fig. 5A–F, lower panels). All samples showed peaks of oxygen (O), calcium (Ca), silicon (Si), and iron (Fe) (Fig. 5A–F). Particles derived from seawater, spring water and soil water showed peaks of sulfur (S) but this element was not detected in particles derived from soil water in which NaCl had been added (Fig. 5A–E vs. F). Aluminum (Al) was noted in particles derived from seawater, Jiaoxi spring water and soil water, whereas this element was not detected in the other specimens (Fig. 5). Additional peaks of sodium (Na), magnesium (Mg), phosphorus (P), manganese (Mn), fluorine (F), barium (Ba), zinc (Zn), potassium (K), terbium (Tb), chlorine (Cl), and cobalt (Co) were also noted (Fig. 5A–F). Nickel (Ni) peaks were mainly attributed to the grids used for this analysis.

Powder X-ray diffraction (XRD) analysis was used to identify the chemical formulas of the minerals found in the particles (Fig. 6). Each particle sample produced distinct diffraction peaks suggesting the presence of crystalline materials (Fig. 6A–F). Comparison of these peaks with existing XRD spectrum database indicated that each particle sample contained a mixture of two to four crystals (Fig. 6A–F, chemical formulas are shown in the top right corner along with the peaks corresponding to each mineral). Seawater-derived particles contained mineral phases of calcium sulfate (CaSO4), silicon oxide (SiO2), and aluminum oxide (Al2O3) (Fig. 6A). Jiaoxi and Wulai spring waters produced mineral particles containing sodium carbonate (Na2CO3), while YMS spring water yielded particles of iron (II) sulfate (FeSO4) (Fig. 6B–D), consistent with the descriptions of these hot springs as carbonated and sulfur hot springs, respectively. Other minerals were also noted in particles derived from hot spring water, including pyroxmangite (MnSiO3), iron sulfide (Fe(X–1)S), silicon oxide, and aluminum oxide (Fig. 6). Mineral particles derived from soil water mainly contained silicon oxide and iron sulfide (Fig. 6E). Particles produced in soil water in which NaCl was added showed peaks corresponding to manganese oxide (Mn5O8), silicon oxide, iron sulfide and sodium chloride (Fig. 6F), indicating that at least part of the particles detected in this sample represented NaCl. Overall, the particles had a low level of crystallinity as shown by the small number and low intensity of diffraction peaks (Fig. 6). While minor variations were noted, the XRD results obtained were consistent with the EDX results described above (Fig. 5) and the initial chemical analysis of the water samples (Supplementary Table S1).

Figure 6: Powder X-ray diffraction analysis of mineral particles derived from surface waters.

Seawater, hot spring water and soil water was filtered through 0.22-μm pore membranes prior to incubation at room temperature for one week. Particles found in one-week old samples were centrifuged at 120000 g for 2 hrs at 4 °C and the resulting pellets were prepared for X-ray diffraction analysis as described in Methods.

Proteomic analysis of mineralo-organic particles derived from surface water

The relatively rounded surface of the mineral particles (Fig. 5) and their apparently low crystallinity (Fig. 6) suggested that the minerals may contain molecules that inhibit mineralization and contribute to the formation of amorphous phases. In order to examine this possibility, we performed a proteomic analysis of the particles using a methodology that we established earlier to study the protein composition of mineralo-organic particles derived from human body fluids16. We observed earlier that mineralo-organic particles derived from human body fluids bind to a wide range of proteins, including coagulation factors, calcification inhibitors, complement proteins, protease inhibitors, and lipid carriers16.

Using the same liquid chromatography-tandem mass spectrometry (LC/MS-MS) approach, we observed that mineral particles derived from surface water contained proteins belonging to the Bacteria, Plantae and Animalia kingdoms (Supplementary Table S2). Mineral particles formed in soil water in which NaCl had been added harbored by far the largest amount and diversity of proteins (Supplementary Table S2). These observations indicate that mineral particles that form in surface water may bind to organic molecules present in solution, forming mineralo-organic complexes.

Biomimetic morphologies of particles derived from soil water

We observed earlier that mineral particles that precipitate in the presence of proteins form round particles that are highly reminiscent of living microorganisms10,11,18,22. We examined the morphologies of soil-water-derived particles using dark-field optical microscopy without fixation or staining, a technique that allows us to follow the formation of the mineral particles during incubation. We observed that soil water produced particles of various morphologies, including small round particles (Fig. 7A) that tended to aggregate to form clumps (Fig. 7B). Notably, large, round particles that formed cell-like structures were observed in soil water samples (Fig. 7C). These biomimetic particles formed relatively large structures that were highly similar to cells undergoing division (Fig. 7C).

Figure 7: Biomimetic morphologies of mineral particles formed in soil water.

Soil water was prepared by mixing one volume of soil with two volumes of double distilled water. The mixture was autoclaved, followed by centrifugation at 1800 g for 30 min. The supernatant was filtered through a 0.2-μm pore filter and frozen at −20 °C for seven days. The resulting solution was thawed at room temperature before observation by dark-field optical microscopy without fixation or staining. Various morphologies were observed, including small, dispersed particles (A), aggregated particles (B), and large formations reminiscent of living microorganisms undergoing cellular division (C).


While synthetic nanomaterials have been studied for their possible technological and biomedical applications, less information is available regarding the formation and biomimetic properties of natural NPs in the environment. We describe here that biomimetic mineralo-organic particles form in surface water obtained from the ocean, hot springs, and soil. These entities consist of mineralo-organic particles of mixed crystalline compositions containing proteins belonging mainly to bacteria but also to plants and animals. The biomimetic mineralo-organic particles are highly similar to the NPs that we detected earlier in human body fluids, and which we referred as bions20,22, suggesting that such mineralo-organic particles may not only form in the human body but also in environmental surface water. Similar mineral particles were also described in human body fluids by other authors including Price38,39, Jahnen-Dechent37,40, Evan41,42, Smith43,44, and others (see also ref. 22 and references therein). The observations presented here indicate that, in addition to the carbonate-, sulfate- and phosphate-based minerals identified earlier10,11,18,20,23,24, mineralo-organic particles may incorporate other minerals (oxides, silicates, and sulfides) that reflect the initial composition of the milieu in which the particles formed. By binding to trace elements and organic molecules in environmental waters, these mineralo-organic particles may be involved in the circulation and availability of trace elements and organics in the environment.

We observed that seawater possesses a large particle-formation potential (Fig. 2), possibly due to high levels of dissolved ions such as sodium, calcium and magnesium (Supplementary Table S1). Mineralo-organic particles that formed in soil water in which NaCl had been added yielded the largest amount of proteins in our experiments (Supplementary Table S2), an observation which may be due to a larger amount of particles produced under these conditions. Our previous observations that various organic molecules bind to bions formed in body fluids11,12,13,16,20,22,26 suggest that additional organic compounds such as humic matter, peptidoglycans and polysaccharides may also be present in the particles described here. Notably, such organic molecules appear to play a role in the formation of morphologies similar to living microorganisms as reported here (Figs 5 and 7).

Mineral particles with morphologies reminiscent of living microorganisms have been described earlier in previous studies. For instance, small mineralized entities called nannobacteria (spelled with two N’s in this context) have been described in various natural environments, including the carbonate hot springs of Viterbo in Italy45, chalcocite (Cu2S) deposits in Northern Chile46, and fresh-water streams and water pipes in the region of Texas47. These nannobacteria have been interpreted as living or fossilized forms of bacteria that may participate in the deposition of minerals in nature. On the other hand, the observations described here and in previous studies14,18,22 indicate that mineralo-organic particles may mimic living microorganisms in several ways. For instance, we show here that mineralo-organic particles can increase in size and number during incubation (Figs 1, 2, 3, 4); they have biomimetic morphologies (Figs 5 and 7); and they bind to organic molecules such as proteins derived from the starting water (Supplementary Table S2). Our observations therefore reinforce the concept that morphology is clearly insufficient to prove existence of living organisms or fossils14,18. Our conclusion is also in agreement with previous reports of nanobacteria-like particles in the Tataouine meteorite48 and in water derived from hot springs in China49, findings which were attributed to the precipitation of amorphous calcium carbonate.

Our study shares some analogies with the seminal work of Chin et al. who showed that dissolved organic matter (DOM) found in marine seawater spontaneously assembles to form a polymer gel containing calcium carbonate50. In the latter work, ocean water that had been filtrated through 0.22-μm pore membrane produced colloid particles with diameters of 2 to 200 nm upon incubation at 20 °C for several hours. These particles gradually increased in size (200 nm to 1 μm), leading to the formation of a network of organic matter containing carbohydrates, proteins, and lipids found in seawater. Calcium carbonate crystals also formed inside the network and this process was attributed to increased pH and a Donnan effect which suggests that the level of calcium ions within the organic network should be higher than outside due to the polyanionic nature of the network50. A similar transition from DOM to particulate organic matter (POM) has been described in various water environments and may represent a general phenomenon with widespread repercussions for geochemical cycles, nutrient availability and prey-predator interactions in oceans51. Further studies are needed to examine the possible relationship between this polymer gel and the formation of mineralo-organic particles described in the present study.

From another perspective, Reich described round particles, which he also termed “bions” (although there is no direct connection with our use of the term; see also our previous work20), in decaying organic matter and soil-water specimens52. These particles were interpreted by Reich as primitive life-forms or pro-life-forms that may form from organic matter. Separately, Grad53, Snyder54 and DeMeo55 observed similar structures that they respectively described as “primordial forms”, “cell-like structures”, or “protocellular forms” in aqueous extracts of soil prepared in a manner similar to the one we used to prepare soil water extract in the present study. Notably, the particles observed by these authors are strikingly similar to the non-living mineralo-organic particles described here (Figs 5 and 7) and in previous studies11,18,19,20,24. We believe that our findings provide a more rational explanation for the descriptions of primitive life-forms made by Reich and other authors. Accordingly, these non-living mineral-organic particles have been shown to spontaneously form in solutions containing abundant ions and organic molecules10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26.

Our results suggest that mineralo-organic particles form in environmental water obtained from various sources. While the particles described here are highly similar to the descriptions of nanobacteria and nannobacteria reported in previous studies, our results indicate that these particles are non-living entities that mimic living microorganisms in several ways. As such, the mineralo-organic particles increase in size and number in culture; they harbor cell-like morphologies; and they bind to organic molecules such as proteins. We speculate that these mineralo-organic particles may affect the circulation and availability of trace elements and organics in nature. The approach developed in the present study provides a platform to examine this possibility and study in more details the possible roles and fate of mineralo-organic particles in the environment.


Water samples

Water samples were collected between April 22, 2008 and May 25, 2012. Seawater was collected off the shores of Northern Taiwan. Hot spring water was collected from Jiaoxi, Wulai and YMS hot springs in Taiwan. Global positioning system (GPS) coordinates of the sampling sites are listed in Supplementary Table S1. Water samples were transported in clean, sterile bottles. Wulai hot spring water contained small amounts of white solid material that sedimented at the bottom of the bottles with time. Unless indicated otherwise, water samples were filtered through either 0.45-μm or 0.22-μm-pore membranes (Millipore) before use.

To prepare soil water, one volume of soil collected on the campus of Chang Gung University (see Supplementary Table S1 for GPS coordinates) was mixed with two volumes of double distilled water. The mixture was vigorously mixed for 1 hr at room temperature, prior to centrifugation at 1800 g for 30 min. The supernatant was collected and filtered through two layers of filter paper (Whatman). The solution was successively filtered through 0.45-μm or 0.22-μm-pore membranes. Samples were stored at 4 °C before use. In some experiments, NaCl (0.9%) was added to the mixture before mixing and centrifugation as above. The experiments shown in Fig. 7 were performed based on a protocol similar to the one used in previous studies52,53,54,55. Briefly, in these experiments, the soil-water mixture was autoclaved, followed by centrifugation at 1800 g for 30 min. The supernatant was filtered through a 0.2-μm pore membrane and frozen at −20 °C for seven days. The solution was thawed at room temperature before observation by dark-field optical microscopy as described below.

Chemical analysis

Water pH, salinity and electrical conductivity (EC) were determined using the 556 MPS multi-parameter instrument (YSI). Dissolved organic carbon (DOC), dissolved ions and trace elements were determined by the Amia Company using inductively coupled plasma-optical emission spectrometry (ICP-OES; Varian 710–ES).

Water treatment

Unfiltered and filtered water samples were incubated at room temperature for one week on a RS-101 rocking shaker (Firstek). In Fig. 2, incubated seawater was filtered through 0.45-μm membranes before re-incubation, and the filtration-incubation cycle was performed nine times.

Dynamic light scattering

Particle sizing and counting was performed as described previously19 using a Coulter N4 Plus Submicron Particle Size Analyzer (Beckman Coulter). In brief, incubated water (1 ml) was transferred to disposable plastic cuvettes (Kartell), prior to gentle mixing by inversion. Reading was performed at an incident angle of 90° at room temperature. Relative particle units (or particle number) correlated in a linear manner with the number of particles observed under optical dark-field microscopy and TEM17.

Electron microscopy

Water samples were centrifuged at 120000 g for 2 hrs at 4 °C to pellet mineral particles. Pellets were washed in HEPES buffer (20 mM HEPES, 140 mM NaCl, pH 7.4) using the same centrifugation step, prior to resuspension in 100% ethanol. Solutions were sonicated 25 min on ice. Aliquots were deposited onto nickel grids coated with a Formvar-carbon film, prior to drying in air under yellow fluorescent light. Dried grids were observed without fixation or staining under a JEOL 2100 transmission electron microscope operated at 200 kV.

Energy-dispersive X-ray spectroscopy

Mineral particles were prepared as above for electron microscopy. EDX spectra were obtained in triplicate with the INCA Energy Microanalysis System (Oxford Instruments). Representative EDX spectra are shown in Fig. 5.

Powder X-ray diffraction analysis

Mineral particles were prepared as above for electron microscopy. Washed particle pellets were dried at 60 °C. Dried pellets were analyzed using the X’PertPRO diffractometer (PANalytical). Chemical formulas were obtained by comparing experimental spectra with the database of the Materials Data Incorporated (MDI)’s Jade and X’Pert High Score (PANalytical) data analysis software.

Proteomic analysis

Water samples were centrifuged at 120000g for 2 hrs at 4 °C to pellet mineral particles. Pellets were washed in HEPES buffer, prior to freeze-drying using a CentriVap Benchtop Vacuum Concentrator (Labconco). Proteomic analysis was performed as before16. Pellets were treated with a solution of 25 mM ammonium bicarbonate containing 200 mM of the protein-reducing reagent dithiotreitol and incubated for 30 min at 65 °C. Pellets were treated with 25 mM ammonium bicarbonate containing 200 mM of the protein-alkylating reagent iodothiotreitol for 30 min at room temperature in the dark. In-solution trypsin digestion was performed using sequencing-grade porcine trypin (Promega; 20 μg/ml) at 37 °C overnight (approximately 1 volume of trypsin was used for 25 volumes of proteins). The resulting peptides were desalted in a homemade column, dried in vacuum centrifuge, and loaded onto a Zorbax 300SB-C18 reverse-phase liquid chromatography column (Agilent Technologies). Peptide separation and elution as well as data analysis was performed as described16. MS data files were analyzed using the Proteome Discoverer Software (version; Thermo Fisher). All samples were compared individually against bacterial, plant, and mammalian taxonomies of the Swiss-Prot database using the MASCOT software (version 2.2; Matrix Science). The proteins identified had at least one identified unique peptide. Proteins interpreted as contaminants were discarded (e.g., keratins, caseins, beta-lactoglobulin).

Optical dark-field microscopy

Washed particles resuspended in double distilled water were deposited on microscopy glass slides. Samples were observed without fixation or staining using a BX-51 optical microscope (Olympus) equipped with a dark-field condenser (Cerbe Distribution) and a 100 × oil immersion UPlanFLN objective with iris (Olympus). Images were acquired with a Spot Flex color, charge-coupled device camera (Diagnostic Instruments).

Statistical analysis

Experiments were performed at least three times. Values are expressed as means ± standard deviation. Statistical analysis was performed using Student’s t test. A statistical significance threshold of p < 0.05 was used.

Additional Information

How to cite this article: Wu, C.-Y. et al. Formation and characteristics of biomimetic mineralo-organic particles in natural surface water. Sci. Rep. 6, 28817; doi: 10.1038/srep28817 (2016).


  1. 1

    Kim, Y. S. B., Rutka, J. T. & Chan, W. C. W. Nanomedicine. New Eng J Med 363, 2434–2443 (2010).

  2. 2

    Nel, A., Xia, T., Madler, L. & Li, N. Toxic potential of materials at the nanolevel. Science 311, 622–627 (2006).

  3. 3

    Hochella, M. F. Jr. et al. Nanominerals, mineral nanoparticles, and Earth systems. Science 319, 1631–1635 (2008).

  4. 4

    Handy, R. D., Owen, R. & Valsami-Jones, E. The ecotoxicology of nanoparticles and nanomaterials: current status, knowledge gaps, challenges, and future needs. Ecotoxicology 17, 315–325 (2008).

  5. 5

    Wigginton, N. S., Haus, K. L. & Hochella, M. F. Jr. Aquatic environmental nanoparticles. J Environ Monit 9, 1306–1316 (2007).

  6. 6

    Christian, P., Von der Kammer, F., Baalousha, M. & Hofmann, T. Nanoparticles: structure, properties, preparation and behaviour in environmental media. Ecotoxicology 17, 326–343 (2008).

  7. 7

    Simate, G. S., Iyuke, S. E., Ndlovu, S., Heydenrych, M. & Walubita, L. F. Human health effects of residual carbon nanotubes and traditional water treatment chemicals in drinking water. Environ Int 39, 38–49 (2012).

  8. 8

    Willhite, C. C., Ball, G. L. & McLellan, C. J. Total allowable concentrations of monomeric inorganic aluminum and hydrated aluminum silicates in drinking water. Crit Rev Toxicol 42, 358–442 (2012).

  9. 9

    Dietrich, A. M. & Burlingame, G. A. Critical review and rethinking of USEPA secondary standards for maintaining organoleptic quality of drinking water. Environ Sci Technol 49, 708–720 (2015).

  10. 10

    Martel, J. & Young, J. D. Purported nanobacteria in human blood as calcium carbonate nanoparticles. Proc Natl Acad Sci USA 105, 5549–5554 (2008).

  11. 11

    Young, J. D. et al. Putative nanobacteria represent physiological remnants and culture by-products of normal calcium homeostasis. PLOS ONE 4, e4417 (2009).

  12. 12

    Young, J. D. et al. Characterization of granulations of calcium and apatite in serum as pleomorphic mineralo-protein complexes and as precursors of putative nanobacteria. PLOS ONE 4, e5421 (2009).

  13. 13

    Wu, C. Y., Martel, J., Young, D. & Young, J. D. Fetuin-A/albumin-mineral complexes resembling serum calcium granules and putative nanobacteria: demonstration of a dual inhibition-seeding concept. PLOS ONE 4, e8058 (2009).

  14. 14

    Young, J. D. & Martel, J. The rise and fall of nanobacteria. Sci Am 302, 52–59 (2010).

  15. 15

    Martel, J., Wu, C. Y. & Young, J. D. Critical evaluation of gamma-irradiated serum used as feeder in the culture and demonstration of putative nanobacteria and calcifying nanoparticles. PLOS ONE 5, e10343 (2010).

  16. 16

    Martel, J. et al. Comprehensive proteomic analysis of mineral nanoparticles derived from human body fluids and analyzed by liquid chromatography-tandem mass spectrometry. Anal Biochem 418, 111–125 (2011).

  17. 17

    Peng, H. H., Martel, J., Lee, Y. H., Ojcius, D. M. & Young, J. D. Serum-derived nanoparticles: de novo generation and growth in vitro, and internalization by mammalian cells in culture. Nanomedicine (Lond) 6, 643–658 (2011).

  18. 18

    Martel, J., Young, D., Peng, H. H., Wu, C. Y. & Young, J. D. Biomimetic properties of minerals and the search for life in the Martian meteorite ALH84001. Ann Rev Earth Planet Sci 40, 167–193 (2012).

  19. 19

    Peng, H. H. et al. Physicochemical and biological properties of biomimetic mineralo-protein nanoparticles formed spontaneously in biological fluids. Small 9, 2297–2307 (2013).

  20. 20

    Wu, C. Y., Young, L., Young, D., Martel, J. & Young, J. D. Bions: a family of biomimetic mineralo-organic complexes derived from biological fluids. PLOS ONE 8, e75501 (2013).

  21. 21

    Wu, C. Y. et al. Membrane vesicles nucleate mineralo-organic nanoparticles and induce carbonate apatite precipitation in human body fluids. J Biol Chem 288, 30571–30584 (2013).

  22. 22

    Martel, J., Peng, H. H., Young, D., Wu, C. Y. & Young, J. D. Of nanobacteria, nanoparticles, biofilms and their role in health and disease: facts, fancy, and future. Nanomedicine (Lond) 9, 483–499 (2014).

  23. 23

    Wu, C. Y., Young, D., Martel, J. & Young, J. D. A story told by a single nanoparticle in the body fluid: demonstration of dissolution-reprecipitation of nanocrystals in a biological system. Nanomedicine (Lond) 10, 2659–2676 (2015).

  24. 24

    Wong, T. Y. et al. Nanoparticle conversion to biofilms: in vitro demonstration using serum-derived mineralo-organic nanoparticles. Nanomedicine (Lond) 10, 3519–3535 (2015).

  25. 25

    Wong, T. Y. et al. Detection and characterization of mineralo-organic nanoparticles in human kidneys. Sci Rep 5, 15272 (2015).

  26. 26

    Martel, J. et al. Fatty acids and small organic compounds bind to mineralo-organic nanoparticles derived from human body fluids as revealed by metabolomic analysis. Nanoscale 8, 5537–5545 (2016).

  27. 27

    Kajander, E. O., Kuronen, I., Akerman, K., Pelttari, A. & Ciftcioglu, N. Nanobacteria from blood, the smallest culturable autonomously replicating agent on Earth. Proc Soc Photo Opt Instrum Eng 3111, 420–428 (1997).

  28. 28

    Kajander, E. O. & Ciftcioglu, N. Nanobacteria: an alternative mechanism for pathogenic intra- and extracellular calcification and stone formation. Proc Natl Acad Sci USA 95, 8274–8279 (1998).

  29. 29

    Kajander, E. O., Ciftcioglu, N., Miller-Hjelle, M. A. & Hjelle, J. T. Nanobacteria: controversial pathogens in nephrolithiasis and polycystic kidney disease. Curr Opin Nephrol Hypertens 10, 445–452 (2001).

  30. 30

    Ciftcioglu, N., McKay, D. S., Mathew, G. & Kajander, E. O. Nanobacteria: fact or fiction? Characteristics, detection, and medical importance of novel self-replicating, calcifying nanoparticles. J Investig Med 54, 385–394 (2006).

  31. 31

    Cisar, J. O. et al. An alternative interpretation of nanobacteria-induced biomineralization. Proc Natl Acad Sci USA 97, 11511–11515 (2000).

  32. 32

    Barr, S. C. et al. Detection of biofilm formation and nanobacteria under long-term cell culture conditions in serum samples of cattle, goats, cats, and dogs. Am J Vet Res 64, 176–182 (2003).

  33. 33

    Raoult, D. et al. Nanobacteria are mineralo fetuin complexes. PLOS Pathog 4, e41 (2008).

  34. 34

    Heiss, A. et al. Hierarchical role of fetuin-A and acidic serum proteins in the formation and stabilization of calcium phosphate particles. J Biol Chem 283, 14815–14825 (2008).

  35. 35

    Olde Loohuis, K. M., Jahnen-Dechent, W. & van Dorp, W. The case: milky ascites is not always chylous. Kidney Int 77, 77–78 (2010).

  36. 36

    Jahnen-Dechent, W., Schäfer, C., Ketteler, M. & McKee, M. D. Mineral chaperones: a role for fetuin-A and osteopontin in the inhibition and regression of pathologic calcification. J Mol Med 86, 379–389 (2008).

  37. 37

    Jahnen-Dechent, W., Heiss, A., Schäfer, C. & Ketteler, M. Fetuin-A regulation of calcified matrix metabolism. Circulation 108, 1494–1509 (2011).

  38. 38

    Price, P. A. et al. Discovery of a high molecular weight complex of calcium, phosphate, fetuin, and matrix gamma-carboxyglutamic acid protein in the serum of etidronate-treated rats. J Biol Chem 277, 3926–3934 (2002).

  39. 39

    Price, P. A., Nguyen, T. M. & Williamson, M. K. Biochemical characterization of the serum fetuin-mineral complex. J Biol Chem 278, 22153–22160 (2003).

  40. 40

    Jahnen-Dechent, W. Lot’s wife’s problem revisited: how we prevent pathological calcification in Biomineralization (ed E. Bauerlein ) 243–267 (Wiley, 2005).

  41. 41

    Evan, A. P. et al. Apatite plaque particles in inner medulla of kidneys of calcium oxalate stone formers: osteopontin localization. Kidney Int 68, 145–154 (2005).

  42. 42

    Evan, A. P. Physiopathology and etiology of stone formation in the kidney and the urinary tract. Pediatr Nephrol 25, 831–841 (2010).

  43. 43

    Smith, E. R. et al. Phosphorylated fetuin-A-containing calciprotein particles are associated with aortic stiffness and a procalcefic milieu in patients with pre-dialysis CKD. Nephrol Dial Transplant 27, 1957–1966 (2012).

  44. 44

    Cai, M. M., Smith, E. R. & Holt, S. G. The role of fetuin-A in mineral trafficking and deposition. Bonekey Rep 4, 672 (2015).

  45. 45

    Folk, R. L. SEM imaging of bacteria and nannobacteria in carbonate sediments and rocks. J Sediment Res 63, 990–999 (1993).

  46. 46

    Sillitoe, R. H., Folk, R. L. & Saric, N. Bacteria as mediators of copper sulfide enrichment during weathering. Science 272, 1153–1155 (1996).

  47. 47

    Folk, R. L. Nannobacteria and the precipitation of carbonates in unusual environments. Sediment Geol 126, 47–55 (1999).

  48. 48

    Benzerara, K., Menguy, N., Guyot, F., Dominici, C. & Gillet, P. Nanobacteria-like calcite single crystals at the surface of the Tataouine meteorite. Proc Natl Acad Sci USA 100, 7438–7442 (2003).

  49. 49

    Jones, B. & Peng, X. Amorphous calcium carbonate associated with biofilms in hot spring deposits. Sediment Geol 269–270, 58–68 (2012).

  50. 50

    Chin, W. C., Orellana, M. V. & Verdugo, P. Spontaneous assembly of marine dissolved organic matter into polymer gels. Nature 391, 568–572 (1998).

  51. 51

    Verdugo, P. et al. The oceanic gel phase: a bridge in the DOM–POM continuum. Marine Chem 92, 67–85 (2004).

  52. 52

    Reich, W. The Bion Experiments on the Origin of Life. (Farrar, Straus and Giroux, 1979).

  53. 53

    Grad, B. Studies on the origin of life: the preparation of primordial cell-like forms in Heretic’s Notebook: Emotions, Protocells, Ether-Drift and Cosmic Life Energy with New Research Supporting Wilhelm Reich (ed DeMeo, J. ) 79–87 (Orgone Biophysical Research Laboratory, 2002).

  54. 54

    Snyder, M. Some observations on Reich’s experiment 20 in Heretic’s Notebook: Emotions, Protocells, Ether-Drift and Cosmic Life Energy with New Research Supporting Wilhelm Reich (ed DeMeo, J. ) 88–94 (Orgone Biophysical Research Laboratory, 2002).

  55. 55

    DeMeo, J. Bion-biogenesis research and seminars at OBRL: progress report in Heretic’s Notebook: Emotions, Protocells, Ether-Drift and Cosmic Life Energy with New Research Supporting Wilhelm Reich (ed DeMeo, J. ) 100–113 (Orgone Biophysical Research Laboratory, 2002).

Download references


We would like to thank Dr. Chihhao Fan from the Department of Safety, Health and Environmental Engineering at Ming Chi University of Technology for help with the chemical analysis of water samples. We also thank Daniel Sdicu for his help with dark-field microscopy observations. This study was supported by Primordia Institute of New Sciences and Medicine and by grants from Chang Gung University (FMRPD2T02), Ming Chi University of Technology (0XB0), and the Ministry of Education of Taiwan (EMRPD190041).

Author information

J.M. and J.D.Y. conceived and designed the research. C.-Y.W., J.M., T.-Y.W., D.Y., C.-C.L. and C.-W.L. performed experiments. All authors analyzed the data. J.M. and J.D.Y. wrote the manuscript.

Correspondence to John D. Young.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.