In vivo homologous recombination holds the potential for optimal molecular cloning, however, current strategies require specialised bacterial strains or laborious protocols. Here, we exploit a recA-independent recombination pathway, present in widespread laboratory E.coli strains, to develop IVA (In Vivo Assembly) cloning. This system eliminates the need for enzymatic assembly and reduces all molecular cloning procedures to a single-tube, single-step PCR, performed in <2 hours from setup to transformation. Unlike other methods, IVA is a complete system and offers significant advantages over alternative methods for all cloning procedures (insertions, deletions, site-directed mutagenesis and sub-cloning). Significantly, IVA allows unprecedented simplification of complex cloning procedures: five simultaneous modifications of any kind, multi-fragment assembly and library construction are performed in approximately half the time of current protocols, still in a single-step fashion. This system is efficient, seamless and sequence-independent and requires no special kits, enzymes or proprietary bacteria, which will allow its immediate adoption by the academic and industrial molecular biology community.
Molecular cloning is at the heart of biomedical and biotechnological research, fundamental to protein structure-function studies, protein engineering and synthetic biology1,2,3. Since the advent of the polymerase-chain reaction (PCR)4, cloning has involved selective PCR amplification and modification of DNA segments, which require directed assembly into a plasmid carrier for propagation in E. coli. Traditionally, restriction enzymes and ligases have been used to direct the assembly of DNA fragments1; however, their sequence-dependency and laborious protocols led to the development of new alternatives, such as: PCR-only5,6,7,8, ligation-independent cloning (LIC)9, recombination-based10,11 and multi-enzyme construction methods (such as Gibson12, In-Fusion13 and USER14). LIC, multi-enzyme construction and some recombination-based approaches (such as SLiCE10) rely on in vitro enzymatic treatment of DNA fragments for assembly. While PCR-only methods eliminate the need for such enzymatic treatment, they involve multiple rounds of PCR and DNA purification. Both cases involve lengthy, hands-on protocols. In vivo assembly, where the bacterial host performs the fusion of DNA fragments, would eliminate the need for multiple steps and reagents, providing significant advantages over all current methods. The advantages of in vivo recombination have led molecular biologists to use the yeast gap-repair cloning system15, despite the hurdles associated with eukaryotic work. In vivo assembly in E. coli has previously been limited to the use of strains with enhanced recombinase activities, such as recA16 and phage recombinases Red/ET17,18, yet these bacterial strains enhance plasmid instability or require specialised preparation of competent cells. As a consequence, strains with reduced recombinase activities (e.g. recA knockouts) are universally used for molecular cloning.
The presence of a recA-independent homologous recombination pathway in E. coli was reported more than 20 years ago19,20,21, but has been neglected until recently, except for sporadic use in specific high throughput applications22,23. The pathway is mostly uncharacterised but is most efficient at recombining linear DNA fragments, likely acting through an annealing mechanism20,24, although alternative mechanisms have been suggested25,26. Conveniently, the recA-independent pathway is responsible for the recombination of short overlapping sequences19, whereas the recA system requires longer homologous DNA stretches (>150–300 bp). The pathway’s short homology requirements, ubiquitous presence in laboratory E. coli strains (in our and others’ experience27,28,29) and reduced compromises on plasmid stability, make it an optimal tool for molecular cloning. Recently, this potential has begun to be realised, both ex vivo27 and in vivo28,29,30, where gene cloning has been performed using in vivo assembly in E. coli. However, protocols are still laborious and require commercial kits, presenting a limited advantage over widely used cloning methods using in vitro enzymatic assembly, such as In-Fusion and Gibson assembly.
In this study we exploit recA-independent homologous recombination to develop a complete cloning system: In Vivo Assembly (IVA) cloning. All cloning procedures (insertions, deletions, mutagenesis and sub-cloning) can be performed and combined at will, using a single universal protocol consisting exclusively of a single-tube PCR followed by DpnI digestion and transformation.
To implement IVA, we first optimised primer design and investigated the efficiency of the recA-independent recombination pathway to assemble multiple DNA fragments. This allowed us to develop a complete cloning system capable of performing both single and multiple modifications with unprecedented speed and simplicity and facilitating the construction of any desired plasmid from a single PCR. We then investigated the potential of this system for plasmid library construction, using the assembly of multiple DNA fragments to create a small mammalian expression library. We provide examples from our work using cDNAs of ionotropic glutamate receptors (AMPA receptor subunits GluA1–4)31 and their associated membrane proteins (TARP γ232 and GSG1L33), in a variety of mammalian expression vectors.
Method overview and primer design
IVA cloning uses in vivo assembly of PCR amplified DNA fragments, guided by short homologous flanking regions that are fused together by recombination. All cloning procedures for single or multi-site modifications, proceed through a single-step PCR, template DNA digestion with DpnI (an endonuclease specific for methylated DNA) and transformation (Fig. 1). As outlined in Fig. 1, all DNA modifications and homologous regions are introduced at the 5′ end of the primers. Insertions (of short sequences that can be included within the primers), deletions and site-directed mutagenesis proceed through inverted PCR with primers binding astride the modification site (Fig. 1a). For insertions, it is cost-optimal to include the extra sequence in the overlapping regions of both Forward (Fw, 5′-3′) and Reverse (Rv, 3′-5′) primers, acting as the homologous region (Fig. 1a). Deletions require inverted primers flanking the undesired region, amplifying outwardly, with the Fw primer containing a region homologous to the Rv primer. Similarly, mutation primers flank the undesired codon, with the new sequence encoded in the Fw primer. Sub-cloning uses PCR of the vector at the location for insertion, while the insert is amplified independently in the same tube, with homologous regions at both linear ends (Fig. 1b). These regions may be included in either the vector or the insert primers. Due to the inverted nature of the primer design, multiple modifications can be performed, simply by combining primers for single modifications in the same PCR tube (described in detail below). Hence, any combination of plasmid modifications may be performed using the same protocol and primers as for single-site protocols.
Method and primer design optimisation
False positive colonies can originate from undigested template DNA. To maximise the percentage of clones containing the desired product, we first identified the highest amount of PCR template plasmid that resulted in no false positive colonies after DpnI digestion. To do so, we performed a deletion of the GluA3 AMPAR N-terminal domain (NTD) coding region in the pRK5 plasmid with increasing amounts of template plasmid (0–50 ng) (Supplementary Table S1, OPT1 primers). Using primers devoid of overlapping regions and therefore unable to recombine (no true positives), all colonies originated from undigested template DNA. As expected, the number of colonies correlated with amount of template used and not with amplification intensity (see 50 ng point), suggesting that colonies originated exclusively from undigested template plasmid (confirmed by restriction analysis and Sanger sequencing) (Fig. 2a and Supplementary Fig. S1). We found that 1 ng of template DNA provided the best PCR product amplification when false positives rarely occur.
To maximise the level of recombination, we studied the effect of both length and binding strength (melting temperature, Tm) of the homologous regions. For both assessments, primers were designed to remove the GluA3 NTD coding region in the pRK5 plasmid. The number of colony-forming units after amplification (using overlaps from 10 to 25 bp in length at a constant Tm of 40 °C) plateaued at lengths greater than 15 bp (Fig. 2b) (OPT2–5 primers). Altering binding strength (at constant 15 bp length) showed increasing recombination (greater CFUs/plate) with higher Tm (Fig. 2c) (OPT6–9 primers). In both cases, no difference in level of amplification was found between the primers, with results exclusively dependent on the efficiency of recombination (Supplementary Fig. S1).
To determine whether there is any preferential enzyme requirement for this system, we tested four commercial DNA polymerases (Phusion, KOD Hot Start, Pfu Turbo and Taq polymerase). The same GluA3-NTD deletion was performed with each enzyme (OPT8 primers). PCR efficiency was variable between enzymes (Fig. 2d and Supplementary Fig. S1) and colony number correlated with the level of amplification (Fig. 2d), meaning that levels of DNA assembly are influenced by PCR amplification efficiency and not the specifics of enzyme activity.
As a result of the optimisation, 1 ng of template DNA was used throughout to minimise false positives. In order to avoid primer-dimer formation through overlaps, optimal homologous regions should be designed to be at least 15 bp in length with a Tm of ~47–52 °C (normally resulting in lengths of 15–20 bp) (Fig. 2e). Phusion polymerase was used at all times due to its high PCR efficiency and fidelity. Although KOD polymerase yielded higher amplification, it has lower fidelity34, an essential property when amplifying whole plasmids with minimal errors.
Simplifying basic molecular cloning procedures using IVA
Insertions and deletions
Insertions and deletions are common modifications, used for adding or removing protein tags, domains or gene promoters. The current most popular method is inverted PCR using 5′-phosphorylated primers, which requires expensive primers, PCR purification and enzymatic ligation of amplification products. IVA cloning eliminates such steps, kits or phosphorylated primers. As examples, we performed: 1) insertion of an N-terminal c-Myc tag in the pRK5-GluA3 plasmid (30 bp) (INS1 primers), 2) deletion of a N-terminal c-Myc tag in a pIRES2-EGFP-GluA2 plasmid (30 bp) (DEL1 primers), 3) deletion of the NTD of GluA3 in the pRK5 vector (1140 bp) (DEL2 primers) and 4) construction of a GluA2-EGFP fusion construct by replacing the IRES cassette from the pIRES-EGFP-GluA2 plasmid with a linker sequence (DELINS1 primers) (Fig. 3a). No effect on amplification was seen when comparing IVA overlapping primer design to phosphorylated primers (INS2 primers) (insertion of a c-Myc tag, Fig. 3b), yet protocols are markedly shortened. Significant numbers of colonies (10–188) were formed when transfected in bacteria (produced in-house), with a transformation efficiency of 3 × 106 CFU/μg of pUC18, with 100% of colonies containing the correctly modified product in every case (Sanger sequencing of 5–10 colonies per plate) (Fig. 3b).
Site-directed mutagenesis is an essential technique for protein engineering and protein structure-function studies. A variety of methods have been designed (reviewed in35) but the commercial QuikChange™ Mutagenesis is the most widely implemented. QuikChange™ relies on amplifying the whole plasmid with fully overlapping primers containing the desired mutation. The nature of primer design favours primer-dimer formation, limiting the amount of amplified product and giving rise to false positives (only 80% of clones correct). Several studies have shown that improved amplification was achieved by slightly displacing the binding region of the primers36,37. Primer design for site-directed mutagenesis using IVA cloning allows full displacement of the primers with the modified base pairs outside the template binding region (Fig. 1a and Supplementary Fig. S2). This eliminates primer-dimer formation and mispriming due to incorrect base pairings.
Here we show examples of four mutations in protein coding genes: GluA1 E202C, GluA2 N292S, GluA4 G208C and TARP γ2 A219Stop (MUT1–4 primers respectively, using the vectors pIRES2-mCherry-GluA1, pIRES2-EGFP-GluA2, pRK5-GluA4 and pGW1-TARP γ2). Their amplification yield is compared to the QuikChange™ mutagenesis method (MUT5–8 respectively). Amplification efficiency was consistently higher using IVA primers (Fig. 3c), which obtained an exponential (Fig. 3d) and cleaner amplification (Supplementary Fig. S2 - low molecular weight smearing with QuikChange™). Significant colony numbers (23–352) and 100% correct mutagenesis (of 5–10 colonies tested) were obtained for all IVA examples. For TARP γ2 A219Stop, both primer designs gave lower amplification than in other examples, yet IVA primers still showed enhanced amplification. Since amplification levels generally correlated with colony number, QuikChangeTM examples were not transformed due to their poor amplification.
The current most favourable routes for sub-cloning are homology-based (e.g. In-Fusion13 or Gibson Assembly12) and require separate PCRs for insert and vector, DNA purification and enzymatic assembly. Sub-cloning with IVA is achieved by amplifying both insert and vector from two plasmids (insert containing and target vector) in a single PCR. We show examples of: 1) sub-cloning of GSG1L, into the pIRES2-mCherry vector and 2) sub-cloning of the GluA2 coding region from the pIRES2 into the pcDNA4/TO vector. Overlapping regions were added to the insert in both cases (SUB1–2 primers respectively in Supplementary Table S1). Two amplification products, corresponding to vector and insert are produced by PCRs (Fig. 3e) which were directionally assembled in vivo with 90% and 100% respectively containing the desired insert (10 colonies tested).
Occasionally, high secondary structure formation, excessive length (i.e. Bacterial Artificial Chromosomes [BACs] and Yeast Artificial Chromosomes [YACs]) or vectors containing repeats (i.e. adeno-associated virus [AAV] vectors) may prevent vector amplification. While this can generally be overcome by using DMSO or betaine in PCRs3,38, certain vectors are not amenable for amplification. In such cases sub-cloning can be performed by restriction digestion of the vector at chosen locations and co-transformation with the desired insert, which contains regions homologous to termini of the digested vector (Fig. 3f). As an example, we have sub-cloned EGFP-Homer1c into the pAAV-CW3SL-EGFP plasmid, digested with NheI and XhoI. Homologous recombination is able to assemble the linear fragments, producing 55 colonies with 60% containing the desired plasmid (12/20 colonies). Transformation of the digested vector alone produced 25 colonies, with recombination at inverted terminal repeat (ITR) sequences of the AAV vector likely causing this high number of incorrect colonies.
Multi-site genetic modifications
Performing multiple modifications on a plasmid is regularly desired, with applications in antibody maturation, protein thermostabilisation and gene repair after synthesis. Current strategies are laborious and time consuming, involving multiple rounds of individual modifications. Mainly, protocols for multi-mutagenesis have been reported39,40,41,42,43 which involve multiple steps and/or expensive primers. Although Gibson cloning has been proposed to enable multiple modifications of any kind41, investigators normally turn to commercial gene synthesis for complex procedures. IVA cloning permits multi-site modifications (insertion, deletion, mutagenesis and sub-cloning) merely by combining primers for single modifications in the same PCR reaction. Due to the inverted nature of the primer design, whereby primers amplify outwardly from each other around the vector, independent amplification products will be formed between each primer-binding site: one Fw primer will combine to amplify a segment with the Rv from the downstream modification. Upon transformation, the unique overlapping sequences will guide assembly of all fragments to form the desired propagative plasmid. As more primers are added, the circular plasmid amplifies in increasing smaller segments, reducing the PCR extension times required. This approach allows simultaneous modifications of any type in a rapid and simple manner. To demonstrate this principle we first swapped the position of a FLAG-tag from the C-terminus of a GluA2 coding sequence to the N-terminus in a CMV-based custom vector (Fig. 4a). Primers were designed as per single modifications to remove the C-terminus tag and insert it at the N-terminus (INS3 and DEL3 primers in Supplementary Table S1). Upon PCR, two amplification products were seen (Fig. 4b) producing 273 colonies on transformation with 100% containing both modifications (5/5 colonies tested).
More complex modifications can be generated in a similar fashion. To provide an example, we built a pRK5-FLAG-GluA3-ΔNTD-GSGSGlinker-TARP γ2 tandem construct, encoding two modified proteins fused by a peptide linker, starting from the pRK5-GluA3 and the pGW1-TARP γ2 plasmids. For this we designed primers 1) to remove the N-terminal domain coding region of GluA3 and replace it with a FLAG-tag (DELINS2 primers) and 2) to sub-clone the TARP γ2 coding region after the GluA3 coding region, with a GSGSG linker at the fusion site (SUB3 and 4 primers, linker encoded in primers as per insertions) (Fig. 4c). A ~1.5 hr PCR was required, producing three DNA fragments (Fig. 4d). 43 CFUs/ plate were produced, of which 70% (7/10 colonies) contained the correct sequence.
Assessing the multi-site potential of IVA cloning
In order to test the number of simultaneous modifications that can be performed, we designed primers to introduce up to five XhoI restrictions sites in the pRK5-GluA3 plasmid (MUT9–13 primers) (Fig. 4e). PCR reactions were set up with increasing numbers of mutational primers (up to five), as seen by the corresponding number of bands produced after amplification (Fig. 4f). Decreasing colony yields and percentage of correct clones were observed as the number of mutations (and therefore recombination events required) increased (Fig. 4g). This was seen reliably with narrow standard deviations among replicates. 100% of colonies were correctly modified for single and double mutations, consistent with previous examples of single modifications (one recombination event) and sub-cloning (two recombination events) examples described above. For three simultaneous modifications, 87% of colonies contained all mutations, in line with tandem construct production. Four and five mutations could be successfully produced with 33% and 13% of colonies being correct.
Multi-fragment assembly and library construction
Since the simultaneous introduction of five mutations required the in vivo assembly of five separate DNA fragments, we reasoned that the same approach could be applied to the assembly of multiple fragments originating from different plasmids. For this we aimed for a fusion construct containing a tetracycline-inducible CMV promoter (CMVtet) (625 bp), EGFP (720 bp), the GluA3 coding region (2667 bp) and the TARP γ2 coding region (972 bp), all cloned into a pRK5 backbone (3573 bp) (Fig. 5a). These DNA fragments were independently PCR amplified in the same tube from different template plasmids (pRK5-GluA3, pcDNA4/TO, pN1-EGFP and pGW1-TARP γ2) in a 1.5 hr reaction (Fig. 5b) (ASS1–5 primers). Unique homologous regions were designed to drive the ordered assembly of a pRK5-CMVtet-EGFP-GluA3-TARP γ2 construct. After PCR, DpnI digestion and transformation, the construct was successfully produced in 14% of the clones (2/14 colonies tested), in line with the efficiency seen for five simultaneous mutations.
DNA libraries with randomised sequences are important tools for protein evolution or selection of nucleotide aptamers. The ability to combine multiple different fragments with high efficiency permits construction of plasmid libraries, where many alternative DNA fragments are incorporated. Mammalian protein expression often requires optimisation, as expression levels are low and sample dependent. The case-by-case optimisation of constructs with different vector properties seems to be among the most popular strategies to overcome the problem44,45,46,47. The simplicity of IVA cloning ideally lends itself to such applications. As a proof of principle, we built a small mammalian expression library where promoters and genes were randomly shuffled and sub-cloned in a vector backbone. Two promoters (CMV and CamKII), three genes (GluA1, GluA2 and GluA3 coding regions) and the pRK5 backbone were amplified in a single PCR (vector and CMV from pRK5-GluA4, CamKII from pCamKII-EGFP-Homer and GluA1–3 from pIRES-GluA1, pIRES-GluA2 and pIRES-GluA3). Common overlapping regions were introduced between backbone and promoters, promoters and genes and genes and backbone, such that plasmids will be formed randomly of any promoter and any gene (LIB1–6 primers) (Fig. 5c). The standard IVA protocol was applied, using a 1.5 hr PCR amplification of all fragments in one tube (Fig. 5d). In order to assess the efficiency of library formation we calculated the expected number of sampled colonies required to find all constructs. Assuming 87% of colonies will contain a properly assembled plasmid (three recombination events), 20 colonies would need to be examined in order to find all possibilities with 95% confidence (0.95 = 1 − (1 − f)n), where “f” is the frequency of the least occurring construct and “n” the number of colonies required. Sampling 15 colonies successfully provided the full plasmid library, highlighting the efficiency and versatility of IVA.
The IVA system provides key advantages over current molecular cloning methods. Firstly, the single-tube, single-step PCR protocol, together with the elimination of enzymatic treatment or purification kits, turns this system into the fastest and cheapest cloning method currently available. In Fig. 6, we compare current optimum cloning procedures to the IVA protocol. Considering hands-on time, protocol length and reagents required, IVA cloning readily outperforms the current most favourable method for each cloning procedure in these aspects. Particularly significant is the improvement in complex procedures, where protocol lengths are almost halved (IVA: 1h45, Gibson Assembly: 3h15) and hands-on time is reduced by ~70% (Fig. 6). IVA cloning allows complex procedures (i.e. multi-fragment assembly) to be performed faster than other favourable methods can achieve simple procedures. While being rapid and cost-effective, IVA cloning is also efficient, sequence-independent, directional and seamless.
IVA is a complete, universal cloning system that can perform all cloning procedures using a single protocol. While recent homology-based methods, such as Gibson Assembly and In-Fusion are suitable for assembling multiple DNA fragments, their protocols for single modifications are less favourable to alternative methods (e.g. phosphorylated primers for small insertions). Therefore, different systems and primer design are applied to individual procedures, which are then not compatible in future cloning strategies (e.g. combining phosphorylated primers for insertion and QuikChangeTM for mutagenesis is unfeasible). IVA primers designed for any single modification are readily usable for combinatorial applications making it the most versatile system to date.
The Golden Gate cloning and MoClo systems are particularly useful for library formation and gene shuffling48,49,50. These rely on type IIs restriction endonucleases and have been reported to allow the one-pot construction of shuffled libraries of up to ~20,000 variants, yet the method relies on availability of restriction sites or initial cloning into appropriate vectors. IVA cloning has the potential to perform such applications without the need of specific restrictions sites. However, since the IVA method requires PCR, there are some limitations on the size of DNA fragments that can be amplified.
IVA cloning exploits a recA-independent recombination pathway, which is emerging as a powerful tool in DNA manipulation. Initial reports of this bacterial pathway and its application to cloning were not rapidly adopted, possibly due to the simultaneous reporting of in vivo cloning using bacterial strains expressing phage recombinases51, which are now widely used for genome engineering52. While the recA-independent pathway has recently been utilised as a cloning tool in AQUA cloning, the protocols involved for its use in vivo require multiple PCRs, gel extraction, mixing of DNA fragments and incubation prior to transformation28,29,30. Although cost-effective when compared to enzymatic assembly methods, protocols are significantly longer (3h30 from set-up to transformation). IVA cloning is efficient without such requirements, providing a fast, versatile and cost-effective system that outperforms all current cloning methods. Performing separate PCR reactions may increase efficiency when assembling >5 DNA fragments, since longer homologous regions can be included that could cause primer annealing problems if mixed in a single tube. Conversely, for library creation, individual PCR amplifications of gene variants would be completely unfeasible when using multiple orders of magnitude, whereas the single-tube IVA method would offer no greater difficulties. While IVA is advantageous for almost all cloning applications, multiple modification of very large plasmids, such as BACs, which cannot be PCR amplified, would require different a different approach.
The recA-independent recombination pathway is present in laboratory E. coli strains regularly used for cloning. Since specialised strains do not need to be obtained, IVA cloning can immediately be adopted. Although we have used XL-10 Gold cells throughout this study, we have successfully tested DH5α, Mach1 and Stbl3 strains with similar success and recent reports have shown efficient recombination using extracts from a variety of standard bacterial strains extracts (TOP10, NEB5α, NEB10β, BL21 (DE3) and JM109)27,28, highlighting the ubiquity of the pathway. We believe that the number of modifications attainable is dependent on the transformation efficiency of the bacterial strains, as seen by lower colony yields when using our homemade cells. Highly competent strains or better transformation methods could enhance IVA cloning to allow even more complex assemblies.
Although the recombination mechanism is still unknown, it is clear that in vivo DNA assembly using common bacterial strains is a powerful tool for molecular cloning. In our experience, when PCR amplification is successful, correctly assembled product is invariably formed. Therefore, optimisation of PCR conditions (i.e. varying primer annealing temperature or using additives such as betaine or DMSO) are the key routes for troubleshooting IVA cloning. “Incorrect” recombination events were never observed with single or double modifications, but as the number of DNA fragments to assemble is increased, non-specific recombination events can produce colonies, contributing to the lower percentage of clones that contained the desired product (see Fig. 4g). However, the percentage of correct clones observed was consistent for different examples that require equal numbers of recombination events. For example, a reliable percentage of correct clones were produced for the sub-cloning examples, the tag-swap and double mutation (90–100%). We observe that performing multi-site modifications with target sequences separated by less than 150 bp can be problematic, however, inexpensive primers of up to 110 bp are now available, which could include both modifications and would allow such procedures to be conducted using a single recombination event.
Recombination is not the only mechanism that has so far been proposed for this cloning strategy25,26,30. One alternative suggestion is that 3′–5′exonuclease activity of the PCR polymerase creates single-stranded 5′- overhangs at fragment ends, which allow the formation of nicked circular plasmids that can be repaired after transformation. We provide strong evidence against this hypothesis. Firstly, Taq polymerase, lacking 3′–5′ exonuclease activity, can be successfully applied to IVA. Secondly, in our hands, promoting insert and vector annealing prior to transformation did not enhance colony formation. Finally, successful clones are formed if vector DNA is linearised using restriction enzymes, without single-stranded overhangs that can anneal and co-transformed with the insert. As insert and vector are mixed on ice at transformation, plasmid assembly can only occur in vivo, likely as a result of recombination, an observation supported by other studies28,30. Insights into the recA-independent pathway will clarify the DNA assembly mechanism and can provide routes for further improvement of the IVA system.
Interestingly, a recent mechanistic study of the QuikChangeTM mutagenesis method37 shows that, in contrast to previous evidence, this popular method actually proceeds through exponential (rather than linear) amplification. The authors hypothesise that overlaps are formed at linear ends that must be fused together by an uncharacterised recombination mechanism. We support this hypothesis, as we can fit an exponential curve (R2 = 0.86) to the amplification of the GluA4 G208C mutant using QuikChangeTM primers (Fig. 3d and Supplementary Fig. S2). Overall, the QuikChangeTM site-directed mutagenesis method appears to proceed through the recA-independent recombination pathway, however primers have not been optimised for that purpose. Our primer design lies at the optimal theoretical point, with the mutation lying fully outside the primer annealing region, giving greatest control over the primer-template Tm and fully avoiding primer-dimer formation, while optimally utilising the recombination pathway.
Using IVA primer design and the one-tube strategy, highly complex cloning protocols can be performed rapidly and effortlessly, with minimal hands-on time. We envisage that applications of the system would have an immediate impact on different fields, from fundamental biochemical research to protein engineering and synthetic biology. We have demonstrated how IVA cloning provides a platform for simplified randomisation, while the minimal hands-on time is of critical importance for high-throughput studies. This will greatly benefit protein engineering projects, for example allowing the simultaneous randomisation of a loop length and a saturation site-directed mutagenesis. Synthetic biology is now facilitated by developments such as BioBricks53, where DNA blocks can be purchased to be assembled at the user’s preference. Advances in directional assembly of DNA fragments are key to progress. Several popular cloning methods are currently applied to such an assembly, for example Gibson cloning12, USER14 and In-Fusion13; however, IVA cloning has no enzymatic assembly requirements and reduces labour time. Molecular cloning is a core technique in biomedical research and IVA cloning will simplify construct preparation for all molecular biologists. Fundamental research is gearing towards the study of more technically challenging protein systems, such as protein complexes, membrane proteins and unstable proteins. Bottlenecks are regularly found during protein expression, purification and stability and construct design has become a key tool to overcome these barriers. IVA cloning provides a platform where multiple plasmid modifications can be performed and combined as desired, eliminating a significant barrier to ideal experimental design and unifying molecular cloning to a single protocol.
Materials and Methods
E. coli strains and reagents
E. coli XL10-Gold competent cells were used throughout, either prepared by the Rubidium Chloride method or commercial (Agilent) (efficiency of ~3 × 106 CFU/μg and ≥5 × 109 CFU/μg of pUC18 respectively). Bacteria were cultured in Lysogeny Broth (LB) medium with appropriate antibiotics (Kanamycin or Ampicillin at 50 or 100 μg ml−1 respectively). Qiagen MiniPrep kit was used for DNA isolations from bacteria and Qiagen PCR purification kit and Gel Extraction Kit were used for purifying from PCR reaction or gels (only when using restriction enzymes), following manufacturer instructions. 1% agarose gels were stained with SYBR® Safe and intensities were measured using a BioRad ChemiDocTM MP Imaging System. 1 Kb DNA ladder (ThermoFisher Scientific) was used for all agarose gel electrophoresis.
Primers and plasmids
Primers were designed using OligoCalc54 and SnapGene® and were obtained from Integrated DNA Technologies (IDT) or Sigma-Aldrich (listed in Supplementary Table S1). All primers were designed to bind template DNA at 60 °C. Plasmids used included pAAV-CW3SL-EGFP (gift from Bong-Kiun Kaang [Addgene plasmid # 61463]), pIRES-mCherry-GluA1, pIRES2-EGFP-GluA2, GluA2 in a CMV-based custom plasmid, pRK5-GluA3, pIRES-EGFP-GluA3, pRK5-GluA4, pGW1-γ2, pIRES2-mCherry, pcDNA4/TO, pIRES-mCherry-GSG1L and pCDNA-pCamKII-EGFP-Homer1c (gift from Andrew Penn).
PCR reactions and time courses
Unless otherwise stated, 25 μL PCR reactions were performed using Phusion® High-Fidelity DNA polymerase (NEB) with 0.1 μM primers and 1 ng template DNAs (0.5 ng of each for the multi-fragment assembly), according to the following protocol: 30 sec at 95 °C, 18 cycles of 10 sec at 95 °C, 30 sec at 60 °C, 4 min at 72 °C and a final 5 min extension at 72 °C. Addition of 1 μL FastDigest DpnI enzyme (Thermo Fisher Scientific) was followed by 15 min incubation at 37 °C prior to transformation. For multi-site/multi-fragment procedures, PCR extension time was reduced to 3 minutes, yielding a 1.5 hr PCR reaction.
For insertions, deletions and mutagenesis 2 μL PCR reactions were transformed into 100 μL of RbCl competent cells. For sub-cloning and double modifications 2 μL of DpnI digested sample were transformed in 30 μL of commercial XL10-Gold cells. For multi-site reactions and multi-fragment assemblies 4 μL and 6 μL of PCR mix were transformed into 30 μL and 50 μL of commercial XL10-Gold cells respectively.
All mixtures were incubated for 15 min at 4 °C, followed by a heat shock at 42 °C for 30 sec and recovery at 37 °C for 45 min with 200 μL Super Optimal Broth with Catabolite repression (SOC) medium added. The entire volume was plated onto LB-agar plates with corresponding antibiotics for overnight incubation at 37 °C. Colonies were manually counted (number of colonies reported as Colony-Forming Units per plate (CFU/plate)) and successful plasmid construction was assessed by restriction digestion and/or Sanger sequencing (Beckman Coulter) of colony DNA.
Mutagenesis time courses were performed in multiple 50 μL reactions with 5 ng of DNA template for improved signal at early time points. Whole reactions were removed from the thermocycler every 2 cycles.
Protocol and primer optimisation
Optimisation of template DNA was performed using 0, 0.1, 0.5, 1, 10 and 50 ng of pRK5-GluA3 template using primers devoid of complementary regions. Length and Tm of overlaps was optimised by varying GC content using either increasing length of overlap while keeping temperature constant, or increasing Tm while keeping length constant. Experiments were performed three times and average intensities and/or colony numbers are presented together with standard error of the mean.
Enzyme tests included Phusion® High-Fidelity DNA polymerase (New England Biolabs), Pfu Turbo (Agilent), KOD Hot Start Polymerase® (Novagen) and Taq DNA polymerase (Invitrogen). 25 μL PCR reactions were run as previously stated in corresponding manufacturer buffers. All experiments were carried out in triplicate and mean values are reported. PCR product intensities were normalised to the highest intensity product.
How to cite this article: García-Nafría, J. et al. IVA cloning: A single-tube universal cloning system exploiting bacterial In Vivo Assembly. Sci. Rep. 6, 27459; doi: 10.1038/srep27459 (2016).
Green, M. R. & Sambrook, J. Molecular Cloning: A laboratory manual 4th edn, Vol. 1 Ch. 9, 157–260 (Cold Spring Harbour Laboratory Press, 2012).
Kelwick, R., MacDonald, J. T., Webb, A. J. & Freemont, P. Developments in the Tools and Methodologies of Synthetic Biology. Front. Bioeng. Biotechnol. 2, 1–23 (2014).
Chen, B.-Y. & Janes, H. W. PCR Cloning Protocols in Methods in Molecular Biology 2nd edn, Vol. 192 (Humana Press, 2002).
Mullis, K. et al. Specific enzymatic amplification of DNA in vitro: The polymerase chain reaction. Cold Spring Harb. Symp. Quant. Biol. 51, 263–273 (1986).
Bryksin, A. & Matsamura, I. Overlap Extension PCR Cloning. Methods Mol. Biol. 1073, 169–174 (2013).
Ulrich, A., Andersen, K. R. & Schwartz, T. U. Exponential Megapriming PCR (EMP) Cloning-Seamless DNA Insertion into Any Target Plasmid without Sequence Constraints. PLoS One 7, e53360 (2012).
Spiliotis, M. Inverse fusion PCR cloning. PLoS One 7, e35407 (2012).
Quan, J. & Tian, J. Circular Polymerase Extension Cloning of Complex Gene Libraries and Pathways. PLoS One 4, e6441 (2009).
Aslanidis, C. & de Jong, P. J. Ligation-independent cloning of PCR products (LIC-PCR). Nucleic Acids Res. 18, 6069–74 (1990).
Zhang, Y., Werling, U. & Edelmann, W. SLiCE: A novel bacterial cell extract-based DNA cloning method. Nucleic Acids Res. 40, 1–10 (2012).
Walhout, A. J. et al. GATEWAY recombinational cloning: application to the cloning of large numbers of open reading frames or ORFeomes. Methods Enzymol. 328, 575–592 (2000).
Gibson, D. G. et al. Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat. Methods 6, 343–345 (2009).
Sleight, S. C., Bartley, B. A., Lieviant, J. A. & Sauro, H. M. In-Fusion BioBrick assembly and re-engineering. Nucleic Acids Res. 38, 2624–36 (2010).
Geu-Flores, F., Nour-Eldin, H. H., Nielsen, M. T. & Halkier, B. a. USER fusion: A rapid and efficient method for simultaneous fusion and cloning of multiple PCR products. Nucleic Acids Res. 35, 0–5 (2007).
van Leeuwen, J., Andrews, B., Boone, C. & Tan, G. Rapid and Efficient Plasmid Construction by Homologous Recombination in Yeast. Cold Spring Harb. Protoc. 2015, 853–861 (2015).
Li, M. Z. & Elledge, S. J. Harnessing homologous recombination in vitro to generate recombinant DNA via SLIC. Nat. Methods 4, 251–256 (2007).
Zhang, Y., Muyrers, J. P., Testa, G. & Stewart, a. F. DNA cloning by homologous recombination in Escherichia coli. Nat. Biotechnol. 18, 1314–1317 (2000).
Trehan, A. et al. REPLACR-mutagenesis, a one-step method for site-directed mutagenesis by recombineering. Sci. Rep. 6, 19121 (2016).
Bi, X. & Liu, L. F. recA-independent and recA-dependent intramolecular plasmid recombination. Differential homology requirement and distance effect. J. Mol. Biol. 235, 414–423 (1994).
Bubeck, P., Winkler, M. & Bautsch, W. Rapid cloning by homologous recombination in vivo. Nucleic Acids Res. 21, 3601–3602 (1993).
Jones, D. H. & Howard, B. H. A rapid method for recombination and site-specific mutagenesis by placing homologous ends on DNA using polymerase chain reaction. Biotechniques 10, 62–66 (1991).
Wang, Y. et al. Restriction-ligation-free (RLF) cloning: a high-throughput cloning method by in vivo homologous recombination of PCR products. Genet. Mol. Res. 14, 12306–15 (2015).
Parrish, J. R. et al. High-throughput cloning of Campylobacter jejuni ORFs by in vivo recombination in Escherichia coli. J. Proteome Res. 3, 582–586 (2004).
Dutra, B. E., Sutera, V. a. & Lovett, S. T. RecA-independent recombination is efficient but limited by exonucleases. Proc. Natl. Acad. Sci. USA 104, 216–221 (2007).
Li, C. et al. FastCloning: a highly simplified, purification-free, sequence- and ligation-independent PCR cloning method. BMC Biotechnol. 11, doi: 10.1186/1472-6750-11-92 (2011).
Klock, H. E., Koesema, E. J., Knuth, M. W. & Lesley, S. A. Combining the polymerase incomplete primer extension method for cloning and mutagenesis with microscreening to accelerate structural genomics efforts. Proteins Struct. Funct. Genet. 71, 982–994 (2008).
Motohashi, K. A simple and efficient seamless DNA cloning method using SLiCE from Escherichia coli laboratory strains and its application to SLiP site-directed mutagenesis. BMC Biotechnol. 15, doi: 10.1186/s12896-015-0162-8 (2015).
Beyer, H. M. et al. AQUA cloning: A versatile and simple enzyme-free cloning approach. PLoS One 10, e0137652 (2015).
Kostylev, M., Otwell, A. E., Richardson, R. E. & Suzuki, Y. Cloning should be simple: Escherichia coli DH5α-mediated assembly of multiple DNA fragments with short end homologies. PLoS One 10, e0137466 (2015).
Jacobus, A. P. & Gross, J. Optimal Cloning of PCR Fragments by Homologous Recombination in Escherichia coli. PLoS One 10, e0119221 (2015).
Keinänen, K. et al. A family of AMPA-selective glutamate receptors. Science 249, 556–560 (1990).
Chen, L. et al. Stargazin regulates synaptic targeting of AMPA receptors by two distinct mechanisms. Nature 408, 936–43 (2000).
Shanks, N. F. et al. Differences in AMPA and Kainate Receptor Interactomes Facilitate Identification of AMPA Receptor Auxiliary Subunit GSG1L. Cell Rep. 1, 590–8 (2012).
McInerney, P., Adams, P. & Hadi, M. Z. Error Rate Comparison during Polymerase Chain Reaction by DNA Polymerase. Mol. Biol. Int. 2014, 1–8 (2014).
Mccullum, E. O., Williams, B. a. R., Zhang, J. & Chaput, J. C. In Vitro Mutagenesis Protocols. Methods Mol. Biol. 634, 103–109 (2010).
Zheng, L., Baumann, U. & Reymond, J.-L. An efficient one-step site-directed and site-saturation mutagenesis protocol. Nucleic Acids Res. 32, e115 (2004).
Xia, Y., Chu, W., Qi, Q. & Xun, L. New insights into the QuikChangeTM process guide the use of Phusion DNA polymerase for site-directed mutagenesis. Nucleic Acids Res. 43, e12–e12 (2014).
Henke, W., Herdel, K., Jung, K., Schnorr, D. & Loening, S. A. Betaine improves the PCR amplification of GC-rich DNA sequences. Nucleic Acids Res. 25, 3957–3958 (1997).
Sawano, A. & Miyawaki, A. Directed evolution of green fluorescent protein by a new versatile PCR strategy for site-directed and semi-random mutagenesis. Nucleic Acids Res. 28, E78 (2000).
Wei, H., Hu, J., Wang, L., Xu, F. & Wang, S. Rapid gene splicing and multi-sited mutagenesis by one-step overlap extension polymerase chain reaction. Anal. Biochem. 429, 76–78 (2012).
Mitchell, L. A. et al. Multichange isothermal mutagenesis: A new strategy for multiple site-directed mutations in plasmid DNA. ACS Synth. Biol. 2, 473–477 (2013).
Luo, F. et al. Efficient multi-site-directed mutagenesis directly from genomic template. J. Biosci. 37, 965–969 (2012).
Kim, Y.-G. & Maas, S. Multiple site mutagenesis with high targeting efficiency in one cloning step. Biotechniques 28, 196–198 (2000).
Radu Aricescu, A. et al. Eukaryotic expression: developments for structural proteomics. Acta Crystallogr. D. Biol. Crystallogr. 62, 1114–24 (2006).
Radu Aricescu, A., Lu, W. & Jones, E. Y. A time- and cost-efficient system for high-level protein production in mammalian cells. Acta Crystallogr. D. Biol. Crystallogr. 62, 1243–50 (2006).
Almo, S. C. & Love, J. D. Better and faster: improvements and optimization for mammalian recombinant protein production. Curr. Opin. Struct. Biol. 26C, 39–43 (2014).
Backliwal, G. et al. Rational vector design and multi-pathway modulation of HEK 293E cells yield recombinant antibody titers exceeding 1 g/l by transient transfection under serum-free conditions. Nucleic Acids Res. 36, e96 doi: 10.1093/nar/gkn423 (2008).
Engler, C., Gruetzner, R., Kandzia, R. & Marillonnet, S. Golden gate shuffling: a one-pot DNA shuffling method based on type IIs restriction enzymes. PLoS One 4, e5553 (2009).
Werner, S., Engler, C., Weber, E., Gruetzner, R. & Marillonnet, S. Fast track assembly of multigene constructs using golden gate cloning and the MoClo system. Bioeng. Bugs 3, 38–43 (2012).
Weber, E., Gruetzner, R., Werner, S., Engler, C. & Marillonnet, S. Assembly of designer tal effectors by golden gate cloning. PLoS One 6, e19722 (2011).
Oliner, J. D., Kinzler, K. W. & Vogelstein, B. In vivo cloning of PCR products in E. coli. Nucleic Acids Res. 21, 5192–5197 (1993).
Sawitzke, J. A. et al. Recombineering: Highly efficient in vivo genetic engineering using single-strand oligos. Methods Enzymol. 533, 157–177 (2013).
Shetty, R. P., Endy, D. & Knight, T. F. Engineering BioBrick vectors from BioBrick parts. J. Biol. Eng. 2, 5 (2008).
Kibbe, W. A. OligoCalc: an online oligonucleotide properties calculator. Nucleic Acids Res. 35, W43–W46 (2007).
We thank Beatriz Herguedas, Ondrej Cais, Hinze Ho, Rafael Fernandez-Leiro, Ana Toste Rego, Katharina Strege, Vaclav Beranek, Andrew Newman, Inmaculada Perez Dorado and M. Madan Babu for critical reading of the manuscript. This work was supported by grants from the Medical Research Council (MC_U105174197 to J.G.N., J.F.W. and I.H.G.).
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
García-Nafría, J., Watson, J. & Greger, I. IVA cloning: A single-tube universal cloning system exploiting bacterial In Vivo Assembly. Sci Rep 6, 27459 (2016). https://doi.org/10.1038/srep27459
Nature Communications (2022)
BMC Biotechnology (2021)
Analysis of Il36a induction by C/EBPβ via a half-CRE•C/EBP element in murine macrophages in dependence of its CpG methylation level
Genes & Immunity (2021)