Cells operate in noisy molecular environments via complex regulatory networks. It is possible to understand how molecular counts are related to noise in specific networks, but it is not generally clear how noise relates to network complexity, because different levels of complexity also imply different overall number of molecules. For a fixed function, does increased network complexity reduce noise, beyond the mere increase of overall molecular counts? If so, complexity could provide an advantage counteracting the costs involved in maintaining larger networks. For that purpose, we investigate how noise affects multistable systems, where a small amount of noise could lead to very different outcomes; thus we turn to biochemical switches. Our method for comparing networks of different structure and complexity is to place them in conditions where they produce exactly the same deterministic function. We are then in a good position to compare their noise characteristics relatively to their identical deterministic traces. We show that more complex networks are better at coping with both intrinsic and extrinsic noise. Intrinsic noise tends to decrease with complexity and extrinsic noise tends to have less impact. Our findings suggest a new role for increased complexity in biological networks, at parity of function.
Cells operate in noisy molecular environments via complex regulatory networks. It is possible to understand how molecular counts are related to noise in specific networks, but it is not generally clear how noise relates to network complexity, because different levels of complexity also imply different overall number of molecules. There is a large literature on how complexity and especially redundancy can increase the robustness of biological systems1,2,3, but it should be emphasized that complexity can also introduce fragility in highly non-linear systems, such as those found in biology4,5. Other theories claim that complexity beyond a limit can lead to information loss6, thus we need a systematic analysis to understand crucial open questions. For a fixed function, does increased network complexity reduce noise, beyond the mere increase of overall molecular counts? If so, complexity could provide an advantage counteracting the costs involved in maintaining larger networks.
For that purpose, we investigate how noise affects multistable systems, where a small amount of noise could lead to very different outcomes; thus we turn to biochemical switches. In a recent paper7 two of the authors describe how a classical cell-cycle switch network (CC)8 approximates the function of a simpler network independently studied in distributed computing: the Approximate Majority algorithm (AM)9. The theoretical study of AM has previously shown that it has some special properties, including asymptotically optimal switching speed and high resistance to noise, which are necessary properties for a “good biological switch”. Although CC can approximate the performance of AM, there are some differences. We showed that by adding a feedback loop to CC that is known to exist in biological networks10, we could improve the correspondence between the biological network and AM, suggesting that the cell cycle switch can in fact achieve the theoretical AM-class performance. Moreover, recent experimental work11 has shown that the additional feedback loop (involving the Greatwall kinase) is necessary for the biological function of the cell cycle switch, reinforcing the relationship between biological and computational networks.
A further refinement of the cell cycle switch network has now been proposed12, resulting in a highly symmetrical network where all the species are intertwined to regulate each other. We show here that the proposed refinements to the initial cell cycle network actually strengthen the computational connection to the AM algorithm: a more complex network becomes more similar to a simple network. So similar, in fact, that the correspondence becomes exact and no longer an approximation. Along the way we show also exact correspondence with other networks that have more direct biological significance than AM, including various symmetry breaking networks13.
We proceed by first establishing that, for corresponding initial conditions, certain networks of different complexity have compatible function from a deterministic point of view (i.e., by their mass action ODEs, that capture the average behavior of cells). They all realize a fast and robust switching function and it is possible to make their switching trajectories exactly overlap by a suitable choice of initial conditions and reaction rates. This coincidence of function is based on recent work by some of the authors14,15 that relates the function of networks of different size based only on structural relationships (that is, based only on reaction graph connectivity and reaction rates).
Since real biological networks have high complexity, but as we have seen, similar dynamical behavior, we may wonder why evolution has selected for such complex systems16. To address this question we investigate whether there are stochastic differences in the various networks and in particular whether the more complex networks gain an advantage in intrinsic noise reduction17. We approach this problem by a number of complementary techniques. We compare noise in the various networks by numerically solving the chemical master equation (CME): this gives accurate results for low molecule counts, but becomes quickly unfeasible because the solution depends combinatorially on the number of molecules in the system and not just on the number of species. We also compare noise in the networks by the central limit approximation (CLA), which becomes more accurate for increasing molecule counts. This technique has the advantage that it can be solved very quickly for large networks and for large initial conditions: the numerical solution is driven by an analytical expression of covariances that depends only on the number of reactions and species (not the number of molecules). The middle ground of intermediate molecule counts (which is of more direct biological relevance) is inaccessible in exact form by either analytical or numerical techniques, but is well bounded by the two above techniques, which give consistent results.
We observe that for equivalent function, more complex networks exhibit a reduction in intrinsic noise. This is not easily attributable simply to the increased total molecule counts18,19. First, although there are more total molecules in more the complex networks, each species is kept at comparable levels and secondly, networks of equal total counts exhibit different noise reduction depending on their structure. Overall, the networks of biological origin exhibit better behavior than minimal networks of similar capability.
The manipulation of noise in biological networks is generally of significant interest; for example, it was shown that noise can be beneficial in biological signaling20,21,22,23: it can drive a sub-population to behave differently from the majority, so that the population as a whole can better adapt to environmental changes24,25. We show that intrinsic and extrinsic noise can be adjusted by an increase in network complexity.
Basic Bistable Networks
We begin by presenting some simple influence networks. These are networks of species that catalytically modify or restore other species; for example, a modification could represent an activation of a protein by phosphorylation and a restoration could represent a deactivation of the same protein by dephosphorylation26. A species in a modified state may have an activity (on other species) that is different from that of the corresponding restored state. It may be that only the restored or modified states are active in such a way, or that both of them are. An influence network does not describe the mechanistic details of the modification/restoration mechanisms, which may vary even within the single biological network that is being modeled. Hiding the mechanisms makes it is easier to see the essential structure of the network27 and enables an abstract exploration of relationships between different networks. In order to study the kinetics of these networks, we fix a specific modification/restoration mechanism, so that detailed quantitative comparisons can be made between networks.
We present our influence networks graphically, but our graphical network notation is formal, meaning that each network is an unambiguous depiction of a specific set of chemical reactions. Hence, specific kinetics can be extracted systematically from each network (see S2 Appendix). Well-established approaches to modeling influence networks are similarly formal but are often based on more general classes of kinetic functions that do not directly yield sets of chemical reactions27.
More specifically (Fig. 1), each influence node in an influence network represents a species with (at least) two distinct molecular states: modified and restored, which are not themselves considered as separate species. Transitions between these states are interpreted as two-step-modifications; e.g., two sequential phosphorylations or dephosphorylations. Other interpretations are possible (e.g., n-step modification) and should not fundamentally change the kinetics of the network as long as the transitions between the modified and restored molecular states are non-linear: that is, in case of n-step modifications, if n > 1. This specific interpretation of modification/restoration as multi-step modification (which is in line with the cell-cycle model in Ref. 12), based on the concept of multisite phosphorylation28, is the basis of our kinetic and stochastic analysis.
Influence nodes are depicted as in Fig. 1A, where a species can be modified by species connected to the ball terminal and restored by species connected to the bar terminal. Modification means that the species is changed from its restored to its modified molecular state and conversely for restoration. In turn, can influence other species, depending on its molecular state, through two kinds of outgoing edges that may connect to other bar or ball terminals. Figure 1B is a view of the same influence node where the molecular states ( for modified and for restored) are explicitly represented; in addition, since we deal with 2-step modification, there is an intermediate molecular state that is not otherwise connected to the rest of the network. The hollow ball terminals here represent simple catalysis. By regulating the rates of flow through within two orders of magnitude we can obtain a variety of linear, hyperbolic and sigmoid responses to a linear modification stimulus, such that the response range is equal to the stimulus range (see S1 Appendix).
Figure 2 shows four networks of interest, where a common characteristic is antagonism between two primary species that results in mutual inhibition leading to to bistability: if either species becomes dominant as a population, it becomes self-supporting and forever dominates the other. All of these networks are based on multiple interlocked positive feedback loops. Some of these come in the form of pure positive autocatalytic loops while others are based on double-negative, antagonistic interactions29. It has long been known that positive feedback loops are necessary for the emergence of multistability in dynamical systems30,31,32; the interesting feature of these networks is that multiple positive loops are intertwined in a way that generates at least two stable states. The second requirement for multistability is the presence of non-linearity in the system33, which comes here in the form of the double-step modifications between modified and restored forms that can be observed in Fig. 2B, where each influence network is expanded into the corresponding chemical reaction networks.
The smallest network, in Fig. 2A(AM), has a single influence species; it depicts the Approximate Majority algorithm9 and also matches the pattern of the epigenetic switch from Ref. 34. Here the mutual inhibition is internal to , between the and molecular states, which compete for dominance as can be seen in more detail in the corresponding chemical reaction network in Fig. 2B(AM).
Figure 2A(SI) depicts a network with two influence species, where both modified and restored states are active. The mutual inhibition in SI is achieved by each relevant molecular state of (, ) antagonizing the corresponding molecular state of (, ), but without direct self-modification. SI is inspired by the spatial regulation of the Septation Initiation Network, where two molecules compete for localization at a given cellular structure13.
An example of a network where only the modified states have a downstream activity on other species is shown in Fig. 2A(MI), where and modify themselves and restore the other. This basic arrangement of cross-inhibition of two enzymes in their active forms can be found in many natural and synthetic biological systems, at least in simplified form (in genetic toggle switches, for example, the self-activation loops are usually replaced by inducers or constitutive transcription)35,36,37,38,39,40.
Finally, the network in Fig. 2A(CCr) is a modified version of the classical Cell Cycle Switch (CC) network8. Recognizable are the two smaller feedback loops on the left hand side, the upper one that is double negative and the lower one that is double positive. In the original CC network (not shown), (corresponding to Wee1) and (Cdc25) are directly regulated by x (Cdk) and counterbalanced by fixed biases. Here we connect these counterbalancing reactions to the restored (inactive) form of x to allow for the modification of and the restoration of to revert when no stimulus is applied to the system. These additional regulatory feedbacks recapitulate the contributions of known (but more complex) biological feedback loops41. As a result, as we shall see, CCr can be better related to the other networks than the original CC. Moreover, as discussed in Ref. 7, the additional feedbacks result in better switching performance.
Deterministic Trajectories of Basic Bistable Networks
Each network in Fig. 2 should be understood in a wider context where external signals are applied to it that cause the network to switch from one stable state to another (e.g. between -modified and -modified in MI). We investigate these external contributions below. Here, however, we begin by studying the core networks, where switching is symbolized by starting from some unstable initial conditions and observing the network settle in one steady state or another.
There is a special relationship between the switching networks in Fig. 2, which we call emulation, such that a network A can emulate another (typically simpler) network B. Emulation means that for any choice of rates and initial conditions for B we can systematically find rates and initial conditions of A such that every trajectory of a species of A exactly overlaps a trajectory of a species of B (assuming mass action reaction kinetics). That is, when a complex network emulates a simpler network, the complex network behaves redundantly like the simpler network. This relationship is based on a mapping of species of A to species of B and on other technical requirements14, but the important point is that these requirements can be reduced to checks on the stoichiometry, rates and connectivity of A and B. That is, they depend only on the structure of A and B and do not require examining their kinetic equations.
In Fig. 2C we demonstrate some of these emulation mappings. For sake of example, we fix the initial conditions for AM as shown in Fig. 2C(AM) and we choose unit rates for all reactions. For each of MI, SI and CCr, we then map their species into species of AM as indicated; for example we map and of MI to of AM, which also determines the initial conditions for and in MI. Implicitly, the mappings of species induce mappings of reactions of those networks into reactions of AM: these are the natural homomorphic mappings determined by the species mapping. A mapping of species and a mapping of reactions together constitute an emulation and under these emulation mappings each trajectory of MI, SI, CCr retraces one trajectory of AM, as shown in Fig. 2D. Moreover, this exact retracing persists no matter what initial conditions we choose for AM, provided we choose initial conditions for the other networks according to the species mapping in Fig. 2C. Similarly, we can vary the reaction rates of AM and the retracing persists if we vary the reaction rates of the other networks according to the homomorphic reaction mapping14.
The more complex networks will usually have additional behaviors when starting from initial conditions that do not obey the emulation constraints, yielding trajectories that do not match any AM trajectories. Hence, emulation is only able to detail a certain facet of a complex network. Still, this can be illuminating; for example, we can conclude that although SI and MI are different networks with different connectivity, found in diverse biological situations and ultimately exhibiting different kinetics, they still have a common functional facet. Because of the connection of both networks to the AM network, that functional facet is the fundamental consensus algorithm that AM represents, Approximate Majority9, which is an instance of computationally optimal switching. So we immediately know from properties of AM that SI and MI are (at least) bistable and can switch with optimal speed. We can then separately ask whether SI and MI have other functions in nature, or in what ways they exploit their greater generality and why biology uses such more complex network instead of a simpler one like AM.
In a similar way, the fact that CCr emulates AM provides the simplest explanation of the core structure of the G2/M cell-cycle switch. That is, it shows that the double-negative and double-positive feedback loops found there42, together produce a switching function that is robust and asymptotically optimal: those are properties of AM that CCr can emulate exactly.
In the following sections we explore the nuances of this commonality, also investigating other networks that fold onto AM in the above sense.
Stochastic Trajectories of Basic Bistable Networks
To reveal possible differences between the networks of Fig. 2 we now study the intrinsic noise characteristics of these networks. A key issue is how to compare stochastic variations in networks that have different numbers of species and how to choose population sizes for those species so that the comparison is in some sense fair. Our strategy is to compare the networks under an emulation mapping, so that a larger network is reduced in a kinetically compatible way to a smaller network. The emulation mapping constrains the initial conditions for the larger network, as described in the previous section. Since the deterministic trajectories can be interpreted as limits of mean values of stochastic trajectories, we set the stochastic initial condition according to the ones for the deterministic emulation mappings, so that in the limit of large number of molecules the stochastic networks become increasingly similar. Even under those initial conditions, the stochastic trajectories (either their mean or variance) at a particular system size need not coincide.
For example, imagine comparing AM with a network that consists just of two separate copies of AM. There is a trivial emulation mapping from the two copies to the single AM that preserves all deterministic trajectories. In this comparison, the two networks also have the same stochastic behavior for the corresponding species, since the two copies of AM are independent. But, more generally, if the two copies of AM are intertwined (SI, for example, can be seen at two copies of AM that have been rewired together), then the stochastic behavior will be affected and we can compare it fairly with that of AM. Moreover, note that SI and MI have the same number of molecules and reactions, but a different structure, so any differences between them will be attributable to the structure, particularly in conditions where they are both emulating AM.
In summary, we compare the means and variances of stochastic networks under emulation mappings. Although the notion of emulation has a deterministic origin, this strategy can be justified by the fluid limit approximation, by which the mean of a stochastic process converges to a differential equation43. We further analyze the noise by the central limit approximation43,44 (also known as the linear noise approximation45) by which the variance of a stochastic process can be computed as fluctuations around the deterministic means.
We begin our analysis by comparing networks via the numerical solution of their Chemical Master Equation (CME), by fixing the emulation mapping and the corresponding initial conditions as in Fig. 2: initial values now represent molecule counts. Figure 3C shows, for example, that solutions of the CME for AM and MI are very similar in mean and variance at steady state (at time t > 5), with MI showing a slight narrowing of variance. Also, MI shows some initial divergence of pairs of trajectories due to asymmetries in the first few steps of its stochastic process. SI does not exhibit that asymmetry and at steady state has a markedly narrower variance bands than AM; CCr has narrower bands still. Note again that SI and MI have the same number of species and molecules and that they are compared in conditions where they both emulate AM.
Figure 3D shows solutions of the Central Limit Approximation (CLA) for each network; this is a way of approximating the variance in the CME of a finite network by considering a certain limit of increasing system sizes. Unlike the CME, which has one differential equation for each system state, the CLA has one differential equation for each species and one for each pair of species (for their covariance); hence the CLA scales much better than the CME to large networks and initial conditions. We can thus obtain a good approximation of behavior in a range of system sizes that fall beyond what is feasible for the CME, while retaining stochastic information that is lost in the corresponding ODEs.
In some detail, a stochastic process for a CRN associates a discrete random variable over the CRN system states to each time instant . We can consider a sequence of stochastic processes, with initial states multiplied by an increasing volume and a normalized sequence over now continuous random variables. In the limit of going to infinity, the rescaled mean converges to the solution of the ODE system v(t) for the original CRN, justifying the approximations . The rescaled variance , instead converges to the variance of a Gaussian process , obtained as the limit of the sequence of processes . Note that , representing the fluctuations of the stochastic process around the deterministic mean . Importantly, has an analytical form, which enables the fast computation of the CLA. A stochastic process for a given CRN in volume is thus replaced by the stochastic process , from which we can analytically approximate and See S3 Appendix for further details.
When comparing the CME (Fig. 3C) to the CLA (Fig. 3D) we should keep in mind two main facts. First, these networks are stochastic and bistable; that is, the distribution of outcomes in final states is highly bimodal at small copy numbers. This can be seen in Fig. 3B and in the CME solutions of Fig. 3C that have two wide and persisting standard deviation bands for e.g. and in AM. The bands represent the fact that, with these initial conditions, is more likely, but not certain, to settle at the highest level and is more likely, but not certain, to settle at the lowest level. In any final state always reaches 0 and this can be seen in its profile: by time 5 is highly likely that a final state has been reached. In a final state there is no noise left in the system (no reactions are enabled), but the distribution of outcomes is bimodal: the standard deviation bands in the final state thus represent uncertainty in outcome rather than sustained noise. A reduction in the widths of these bands means that the outcome is more likely to agree with the initial conditions, that is, with settling at the highest level because it started higher than . (All the individual stochastic trajectories lie between 0 and 3: bands that go outside of this range are an artifact of plotting the standard deviation around the mean.)
Second, the CLA characterizes a situation at higher copy number, closer to the deterministic limit45, where the bimodal distribution becomes gradually more unimodal: at higher copy number is increasingly more likely to settle at the highest level. This is why in the CLA the standard deviation thins out at greater time points, representing the fact that the distribution becomes unimodal. At earlier time points however is still noisily finding its way to the top and it is has non-zero variance. The progression in the CME and CLA from low counts to high counts for the AM network can be seen in Fig. 4. The CLA does not provide a good approximation at low molecular counts (since its central limit assumption is violated by bimodal distributions), where we should rely on the CME. The CLA approximation improves at higher counts and eventually the CME and CLA converge to each other and to the deterministic mean. There is also convergence in the standard deviation about the mean, which become proportional to the square root of the copy number (Fig. 4J).
Careful comparison of the CLA and also of the CME solutions of the various networks of Fig. 3 reveals that the noise is a little bit smaller in the more complex networks. Thus our analysis so far suggests that emulation of a simpler network by a more complex one can perfectly match its deterministic behavior, but the more complex network might reduce the effect of molecular noise. To investigate this hypothesis further we turn to more complex bistable networks.
Complex cell cycle switch networks
We have shown above that AM can summarize the behavior of a minimal cell cycle switch model (CCr). Our earlier results show that the original cell cycle network extended with the Greatwall kinase also matches the kinetics of AM7. That model, GW, contains four molecular species (Fig. 5 GW), where x stands for the core cell cycle regulator kinase Cdk, z for its inhibitory kinase Wee1, r for the activating phosphatase Cdc25 and s for the phosphatase PP2A, which reverts the phosphorylations originally driven by Cdk. The Greatwall kinase (which is not modelled explicit in GW) is a component on the pathway from x to s.
A more recent and detailed model, NCC (the Fisher-Krasinska-Coudreuse-Novak Cell Cycle switch12), is shown in Fig. 5. The Greatwall kinase is represented by the species p, along with the phosphatase PP1 represented by q. This network wiring was originally proposed in Ref. 12, but its kinetic behavior was not investigated. Here we show that not only GW, but also NCC can emulate AM, again in the sense that GW and NCC deterministic traces can reproduce AM deterministic traces for all possible combinations of AM rates and initial conditions. An example of such traces is shown in Fig. 5B. We further investigate the stochastic behavior of these networks: following the same methods as used above, we calculate the CME and CLA trajectories of these larger systems and compare their standard deviations.
Summarizing, in Fig. 6 we compare the standard deviation of the principal species (those representing Cdk) of all the networks in Figs 3 and 5. Two sets of initial conditions are checked: they each make all the networks exhibit identical deterministic trajectories, as in Figs 2C and 5B. One set of initial condition results in the networks settling with higher probability with the principal species ( or ) high. The other, symmetrical, set of initial condition results in the networks settling with the principal species low and the complementary species ( or ) high. Note that the deterministic means of the principal species in the first case match the means of the complementary species in the second case, but this symmetry does not always hold for standard deviation.
The simplest network, AM, is the one exhibiting uniformly the highest standard deviation, both in the CME and the CLA. As network complexity increases, there is a trend towards lower standard deviation, with GW and NCC exhibiting the least amount overall. Note that GW has a different relative performance in the two initial conditions. In this kind of comparative analysis, the computation of the CME for networks as complex as NCC becomes very expensive and problematic even with very small numbers of molecules of each species: the CLA becomes in practice necessary for a deeper analysis or for larger networks.
So far we have analyzed the behavior of various switching networks by comparing their time evolution, both deterministically and stochastically: this characterizes their switching speed when starting from some arbitrary state. These networks were considered to work in isolation, which is not typical of real biological systems. External stimuli can drive transitions between the two stable states of the cell cycle similarly to many other biological switches29. The response of biological switches to external input is traditionally investigated by bifurcation analysis46. This technique works only for deterministic systems, thus we need to develop a method for comparing the noise of our models as they are driven back and forth between the two steady states through a hysteresis loop.
For this kind of analysis, we place the switching networks in hysteresis harnesses (Fig 7A, S4.1) as in Ref. 7, in order to compare their stimulus-response behavior: a varying input stimulus that is pushing the switch in one direction is competing against a fixed bias that is pushing the switch in the opposite direction. Again the question is how to make harnesses for networks of different sizes so that we can compare them in some sense fairly. Our strategy here too is based on emulation: the harnesses must be such that the deterministic equivalence of networks together with their harnesses still holds (see details in S4 Appendix). On that basis we can compare the probability distribution of each network for each amount of stimulus.
The plots of Fig. 7A show the stationary distribution of states at various input levels. The plots look quite similar, but not totally the same. Each network gives a bistable system when the input stimulus is close to the value of the opposite fixed bias (indicated by the dashed lines of Fig. 7B). The width of this bistable region, however, differs between networks. We compare the overall shape of the response by computing the summed Wasserstein metric47 (also known as the “earth-mover’s distance”, EMD) between each pair of networks and mapping these into a 2D space (Fig. 7C). This reveals that AM is quite different from GW, NCC and MI, but AM, SI, CCr and NCC line up on a single line following their increasing complexity.
Effects of extrinsic noise
Our results so far suggest that the complexity of a network determines how it responds to intrinsic noise caused by low molecule numbers. In real biological systems the external conditions fluctuate as well, resulting in extrinsic noise that could be captured by variations in the rate constants of the models48. So far in all our models we have used unity rates for all reactions; next we test how the different networks respond to noise applied to the reaction rates.
In Fig. 8 we show that, with respect to the basal models (with unit rates), the same level of parameter variation49,50 leads to smaller deviations in the more complex networks49,50. To simulate extrinsic noise, the reaction rates are randomly sampled from Gaussian distributions with mean 1 and standard deviation 0.5. The total size of the perturbation is then quantified using the metric in Ref. 49, which takes the sum of the deviations on a logarithmic scale. By combining parameter perturbations into a single quantity, networks with different numbers of parameters can be easily compared, though networks with more parameters naturally have a larger total parameter variation. The perturbed system is simulated using hysteresis harnesses (as in Fig. 7A), then compared with the equivalent behavior from the basal rates, again quantified using the Wasserstein metric (see S5 Appendix). This approach resembles classical sensitivity analysis in that we quantify the magnitude of the response to parameter perturbations. However, by generating the perturbations with random variables (taken from a fixed distribution for all parameters), the sensitivity measure is a probability distribution. In Fig. 8B, we use summary statistics to conveniently compare the sensitivity of the networks. Specifically, the mean and standard deviation are computed over all 250 random perturbations. Note that we do not attempt to normalize by the number of reactions/parameters. Interestingly, we see that the six-component NCC and, to a lesser extent, the two-component MI networks are more robust to extrinsic noise than the one-component AM, while other multi-component networks are considerably less robust than AM (Fig. 8). Thus, complexity can help to reduce extrinsic noise, but the actual structure of networks is crucial.
We have investigated similarities and differences between robustly switching networks of various complexity. A common feature of all the networks is that they contain at least two positive feedback loops, which are important for their efficient switching dynamics51,52. We have shown that with corresponding initial conditions all investigated networks show exactly the same average behavior. Moreover, this property extends to different, corresponding, choices of reaction rates. We summarize this kinetic matching between networks by saying that the larger networks emulate (deterministically) the smaller networks7.
The fact that CCr emulates AM provides the simplest explanation of the core structure of the G2/M cell-cycle switch. That is, it shows that the (mysterious) double-negative and double-positive feedback loops found in the control of Cdk activation53 produce a switching function that is robust and asymptotically optimal: those are known theoretical properties of AM, which CCr can emulate exactly. Many other biological switches contain a similar two-positive-feedback loop structure. AM has the exact same structure as the epigenetic switching network of nucleosome modification34. SI resembles the asymmetry regulating switch in fission yeast’s Septation Initiation Network13. Many other symmetry breaking systems are controlled by similarly wired networks with various levels of complexity.
Given that baseline of kinetic similarity in mean behavior, we have shown that more complex networks are better in coping with both intrinsic and extrinsic noise. Intrinsic noise tends to decrease with complexity and extrinsic noise tends to have less impact. To be clear, the absolute noise (the variance, or standard deviation) increases in absolute terms with increasing molecular numbers, as can be seen in Fig. 4 for AM and in fact it is known that noise in protein levels scales with mean protein abundances54. At the same time, the relative noise, or more precisely the signal-to-noise ratio, or coefficient of variation, which is given by the ratio of mean to standard deviation, decreases with increasing molecular number. We have compared networks of different complexity were all the species are kept at the same identical levels and where the more complex networks just have more species (and higher total molecular numbers). We have shown that in those comparable conditions the more complex networks exhibit less absolute intrinsic noise for each species and less overall variation in response due to extrinsic noise.
It has been argued that in highly optimized biological systems there is a trade-off between robustness (such as robustness to perturbations) and performance, while at the same time there is an evolutionary requirement for both1. The cell cycle is surely optimized for biomass production and presumably operates on the “efficient frontier” of that trade-off55. Further, the cell cycle switch implements a computationally optimal algorithm; hence it seems that its performance has not been fundamentally compromised. If performance is held high, then the main way to increase robustness of a system may be to increase the complexity of the biochemical network. This is precisely what we observe in the relationship between the current network of the cell cycle switch and potentially simpler and more ancient versions: performance is maintained, while complexity and robustness is increased. Robustness here can be intended both as resistance to point failures and resistance to noise.
The real cell cycle switch is likely even more complex than our most detailed model (NCC), but must have originated from some simpler network. Larger networks are obviously more expensive to maintain, even just considering the total number of proteins that must be synthesized. Hence, complex networks are less of a burden in situations where resources are not a problem. Based on this we suggest that complex networks are selected to control crucial biological switches in energy rich conditions. In that respect, cell cycle transitions are essential for reproduction and nutrient sensing pathways, where various mechanism ensure that these transitions happen only in good environmental conditions56. Thus, the cell cycle switch perfectly matches the conditions that can support complex networks. Conversely, complex networks tend to reduce noise level and hence for a fixed noise level that can be tolerated, they can support economizing on protein levels.
How to cite this article: Cardelli, L. et al. Noise Reduction in Complex Biological Switches. Sci. Rep. 6, 20214; doi: 10.1038/srep20214 (2016).
Kitano, H. Biological robustness. Nature Reviews Genetics 5(11), 826–37 (2004).
Stelling, J., Sauer, U., Szallasi, Z., Doyle, F. K. & Doyle, J. Robustness of cellular functions. Cell 118(6), 674–685.
Csete, M. E. & Doyle, J. Reverse engineering of biological complexity. Science 295(5560), 1664–1669 (2002).
Kitano, H. Towards a theory of biological robustness. Molecular Systems Biology 3: 137 (2007).
Carlson, J. M. & Doyle, J. Complexity and robustness. PNAS 99, 2538–2545 (2002).
Lestas, I., Vinnicombe, G. & Paulsson, J. Fundamental limits on the suppression of molecular fluctuations. Nature 467, 174–178 (2010).
Cardelli, L. & Csikász-Nagy, A. The cell cycle switch computes approximate majority. Scientific Reports 2, 656 (2012).
Novak, B. & Tyson, J. J. Numerical analysis of a comprehensive model of M-phase control in Xenopus oocyte extracts and intact embryos. J. Cell Sci. 106 (Pt 4), 1153–68 (1993).
Angluin, D., Aspnes, J. & Eisenstat, D. A simple population protocol for fast robust approximate majority. Distributed Computing 21(2), 87–102 (2008).
Mochida, S., Maslen, S. L., Skehel, M. & Hunt, T. Greatwall phosphorylates an inhibitor of protein phosphatase 2Α that is essential for mitosis. Science 330(6011), 1670–1673 (2010).
Hara, M. et al. Greatwall kinase and cyclin B-Cdk1 are both critical constituents of M-phase-promoting factor. Nat. Commun. 3, 1059 (2012).
Fisher, D., Krasinska, L., Coudreuse, D. & Novak, B. Phosphorylation network dynamics in the control of cell cycle transitions. J. Cell Sci. 125 (Pt 20), 4703–11 (2012).
Bajpai, A. et al. Dynamics of SIN asymmetry establishment. PLoS Computational Biology 9(7), e1003147 (2013).
Cardelli, L. Morphisms of reaction networks that couple structure to function. BMC Systems Biology 8, 84 (2014).
Tschaikowski, M. & Tribastone, M. Exact fluid lumpability for Markovian process algebra. In CONCUR 2012 – Concurrency Theory, Vol. 7454 (eds Koutny, M. & Ulidowski, I. ) 380–394 (Springer 2012).
Alon, U. Biological Networks: The tinkerer as an engineer. Science 301(5641), 1866–1867 (2003).
Swain, P. S., Elowitz, M. B. & Siggia, E. D. Intrinsic and extrinsic contributions to stochasticity in gene expression. PNAS 99(20), 12795–12800 (2002).
Paulsson, J. Summing up the noise in gene networks. Nature 427, 415–418 (2004).
Bar-Even, A. et al. Noise in protein expression scales with natural protein abundance. Nature Genetics 38, 636–643 (2006).
Balázsi, G., van Oudenaarden, A. & Collins, J. J. Cellular decision making and biological noise: from microbes to mammals. Cell 144(6), 910–925 (2011).
To, T.-L. & Maheshri, N. Noise can induce bimodality in positive transcriptional feedback loops without bistability. Science 327(5969), 1142–1145 (2010).
Eldar, A. & Elowitz, M. B. Functional roles for noise in genetic circuits. Nature 467, 167–173 (2010).
Raj, A. & van Oudenaarden, A. Nature, nurture, or chance: stochastic gene expression and its consequences. Cell 135, 216–226 (2008).
Acar, M., Mettetal, J. T. & van Oudenaarden, A. Stochastic switching as a survival strategy in fluctuating environments. Nature Genetics 40, 471–475 (2008).
Fasani, R. A. & Savageau, M. A. Molecular mechanisms of multiple toxin–antitoxin systems are coordinated to govern the persister phenotype. PNAS 110(27), E2528–E2537 (2013).
Hunter, T. Protein kinases and phosphatases: The Yin and Yang of protein phosphorylation and signaling. Cell 80(2), 225–236 (1995).
Tyson, J. J. & Novák, B. Functional motifs in biochemical reaction networks. Annu. Rev. Phys. Chem. 61, 219–40 (2010).
Gunawardena, J. Multisite protein phosphorylation makes a good threshold but can be a poor switch. PNAS 102(41), 14617–14622 (2005).
Ferrell, J. E., Jr. Self-perpetuating states in signal transduction: positive feedback, double-negative feedback and bistability. Current Opinion in Cell Biology 14(2), 140–148 (2002).
Griffith, J. S. Mathematics of cellular control processes II: positive feedback to one gene. Journal of Theoretical Biology 20(2), 209–216 (1968).
Thomas, R. On the relation between the logical structure of systems and their ability to generate multiple steady states or sustained oscillations. In Numerical Methods in the Study of Critical Phenomena, Series in Synergetics Vol 9 (eds Della Dora, J., Demongeot, J. & Lacolle, B. ) 180–193 (Springer 1981).
Thomas, R. & Kaufman, M. Multistationarity, the basis of cell differentiation and memory. I. Structural conditions of multistationarity and other nontrivial behavior. Chaos 11, 170 (2001).
Novák, B. & Tyson, J. J. Design principles of biochemical oscillators. Nat. Rev. Mol. Cell Biol. 9, 981–991 (2008).
Dodd, I. B., Micheelsen, M. A., Sneppen, K. & Thon, G. Theoretical analysis of epigenetic cell memory by nucleosome modification. Cell 129(4), 813–822 (2007).
Gardner, T. S., Cantor, C. R. & Collins J. J. Construction of a genetic toggle switch in Escherichia coli. Nature 403, 339–342 (2000).
Becskei, A. & Serrano, L. Engineering stability in gene networks by autoregulation. Nature 405, 590–593 (2000).
Arkin, A., Ross, J. & McAdams, H. H. Stochastic kinetic analysis of developmental pathway bifurcation in phage λ-infected Escherichia coli cells. Genetics 149(4), 1633–1648 (1998).
Verdugo, A., Vinod, P. K., Tyson, J. J. & Novak, B. Molecular mechanisms creating bistable switches at cell cycle transitions. Open Biology 3(3), 120179 (2013).
Motegi, F. & Seydoux, G. The PAR network: redundancy and robustness in a symmetry-breaking system. Philos. Trans. R. Soc. Lond. B Biol. Sci. 368(1629), 20130010 (2013).
Yang, X., Lau, K.-Y., Sevim, V. & Tang, C. Design principles of the yeast G1/S switch. PLoS Biology 11(10), e1001673 (2013).
Fisher, D., Krasinska, L., Coudreuse, D. & Novák, B. Phosphorylation network dynamics in the control of cell cycle transitions. J. Cell Sci. 125, 4703–4711 (2012).
Lindqvist, A., Rodríguez-Bravo, V. & Medema, R. H. The decision to enter mitosis: feedback and redundancy in the mitotic entry network. J. Cell Biol. 185(2), 193–202 (2009).
Anderson, D. F. & Kurtz, T. G. Continuous time Markov chain models for chemical reaction networks. In Design and analysis of biomolecular circuits (eds Koeppl, H. et al.) 3–42 (Springer, 2011).
Bortolussi, L. & Lanciani, R. Model checking Markov population models by central limit approximation, In Quantitative Evaluation of Systems, Vol. 8054 (eds Norman, G. & Sanders, W. ) 123–138 (Springer 2013).
Wallace, E. W. J., Gillespie, D. T., Sanft, K. R. & Petzold, L. R. Linear noise approximation is valid over limited times for any chemical system that is sufficiently large. Systems Biology, IET, 6(4), 102–115 (2012).
Csikász-Nagy, A., Battogtokh, D., Chen, K. C., Novák, B. & Tyson, J. J. Analysis of a generic model of eukaryotic cell-cycle regulation. Biophysical Journal. 90(12), 4361–4379 (2006).
Rüschendorf, L. Wasserstein metric. In Encyclopedia of Mathematics (ed. Hazewinkel, M. ) (Springer 2001).
Elowitz, M. B., Levine, A. J., Siggia, E. D. & Swain, P. S. Stochastic gene expression in a single cell. Science 297(5584), 1183–1186 (2002).
Barkai, N. & Leibler, S. Robustness in simple biochemical networks. Nature 387, 913–917 (1997).
Romanel, A., Jensen, L. J., Cardelli, L. & Csikász-Nagy, A. Transcriptional regulation is a major controller of cell cycle transition dynamics. PLoS ONE 7(1), e29716 (2012).
Ferrell, J. E., Jr. Feedback regulation of opposing enzymes generates robust, all-or-none bistable responses. Current Biology 18(6), R244–R245 (2008).
Brandman, O., Ferrell, J. E., Jr, Li, R. & Meyer, T. Interlinked fast and slow positive feedback loops drive reliable cell decisions. Science 310(5747), 496–498 (2005).
O’Farrell, P. H. Triggering the all-or-nothing switch into mitosis. Trends Cell Biol. 11(12), 512–519 (2001).
Bar-Even, A. et al. Noise in protein expression scales with natural protein abundance. Nat Genet. 38(6), 636–43 (2006).
Kitano, H. Violations of robustness trade-offs. Mol. Syst. Biol. 6, 384 (2010).
Jorgensen, P. & Tyers, M. How cells coordinate growth and division. Curr. Biol. 14, R1014–1027 (2004).
Ethier, S. N. & Kurtz, T. G. Markov processes: characterization and convergence (Wiley 2005).
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Cardelli, L., Csikász-Nagy, A., Dalchau, N. et al. Noise Reduction in Complex Biological Switches. Sci Rep 6, 20214 (2016). https://doi.org/10.1038/srep20214
Evolution of opposing regulatory interactions underlies the emergence of eukaryotic cell cycle checkpoints
Scientific Reports (2021)
BMC Systems Biology (2018)
Journal of Mathematical Biology (2018)