Abstract
We introduce a setup which realises a tunable engineered environment for experiments in circuit quantum electrodynamics. We illustrate this concept with the specific example of a quantum bit, qubit, in a highqualityfactor cavity which is capacitively coupled to another cavity including a resistor. The temperature of the resistor, which acts as the dissipative environment, can be controlled in a well defined manner in order to provide a hot or cold environment for the qubit, as desired. Furthermore, introducing superconducting quantum interference devices (SQUIDs) into the cavity containing the resistor, provides control of the coupling strength between this artificial environment and the qubit. We demonstrate that our scheme allows us to couple strongly to the environment enabling rapid initialization of the system, and by subsequent tuning of the magnetic flux of the SQUIDs we may greatly reduce the resistorqubit coupling, allowing the qubit to evolve unhindered.
Introduction
The field of circuit quantum electrodynamics^{1,2,3,4,5,6,7,8,9,10,11,12,13,14,15} (cQED), wherein quantum mechanical cavity modes couple to nonlinear elements such as twolevel quantum systems made of electric circuits, has proven to be a very attractive architecture for quantum computing. Indeed, progress has been so impressive that recently fabricated superconducting qubits offer coherence times of such length that prototype faulttolerant quantum computing is already beginning to look like a genuine possibility^{14}. Simultaneously, recent advances in nanoscale engineering have opened up the possibility to enter regimes in which single photons are the dominant heat carriers in mesoscopic systems^{16,17,18,19,20}. In particular, superconductor–insulator–normalmetal (SIN) junctions provide exquisite temperature control and thermometer sensitivity for small metal islands^{21}. In Refs. 22 and 23, these two fields were unified with a study of the photonic heat conduction between two resistors in a superconducting cavity. We present an advancement to these works by demonstrating that bringing together the excellent qubit control of cQED with the sophisticated normalmetal components used in SIN thermometry can offer great benefits for quantum computing.
Ensuring correct system initialization is vital for efficient operation of quantum algorithms^{24}. For many cQED experiments this initialization can be adequately achieved simply by waiting for a sufficiently large multiple of the qubits natural lifetime, after which it can be assumed to have deexcited with high probability^{25}. As the limits of cQED are pushed harder and harder by increasingly sophisticated techniques, the comparatively slow and imprecise nature of this process is highlighted. Recent works suggest several solutions which offer improvements in performance^{26,27,28,29,30,31,32}. In particular, Ref. 32 has demonstrated initialization by measurement, a promising route which offers a significant speed advantage. In its current realization, however, this approach requires multiple imperfect measurements to rule out the presence of residual cavity excitations.
Here we report on a simple and possibly more efficient alternative which may also be employed as a complementary technique to further enhance the efficiency of these previously introduced schemes. To this end, we present a setup in which a capacitor is used to divide a superconducting coplanar transmission line into two coupled cavities. There are numerous examples of using such coupled cavities in an advantageous manner in related literature^{33,34,35,36}. We place a resistor into one of these cavities, and we introduce a qubit into the second, which retains a high qualityfactor. When the frequencies of both the cavities and the qubit are detuned, the cavity housing the qubit is coupled only weakly to the resistor. In this case, both the excited state of the qubit and the photonic excitations of this cavity are well protected from the artificial resistor environment. The inclusion of one or more superconducting quantum interference devices (SQUIDs) into the dissipative cavity, enables us to tune the interaction between the two cavities, and thus modify the probability amplitude of the photonic excitations at the position of the resistor. In this way, we may independently vary the photonic and qubit decay rates over several orders of magnitude. Consequently, it becomes possible to switch the environment of the qubit between a high qualityfactor regime, essential for protecting the qubit during evolution, and a low qualityfactor regime, so that the qubit state may be initialized at will.
Results
We first revisit work relating to the integration of components within a superconducting coplanar waveguide cavity. Our method follows the usual treatment^{2,37}, but includes a capacitor dividing the cavity into two regions. These regions act as the highand lowquality cavities depending on their configuration.
Modification of cavity modes due to a dividing capacitor
We consider a setup in which we insert at position x_{c}, a capacitor of capacitance C_{c} into the central conducting strip of a highquality superconducting coplanar waveguide cavity, as shown schematically in Fig. 1. We employ the usual representation of the cavity as a onedimensional circuit, a model into which the capacitor may be conveniently incorporated. Our starting point to calculate the photonic modes is the classical Lagrangian which may be written in terms of Θ(x, t), the integral of the charge density in the cavity from 0 to x, as where the cavity has a length L, with a capacitance per unit length c, and we allow for a positiondependent inductance per unit length ℓ(x) of the form We look for solutions to the EulerLagrange equation of the form , where the functions X_{j}(x) form an orthonormal basis, . The equation takes the form where ω_{j} is a constant, i.e., the eigenfrequency of the j^{th} mode. Applying the boundary conditions X_{j}(0) = X_{j}(L) = 0, and continuity at x_{c} leads to the solution where , and is a normalization constant given by The normalization ensures that .
Integrating Eq. (3) over an infinitesimal range around x_{c} provides a condition for the eigenvalues, which can be utilized to obtain the spectrum {ω_{j}}, for example, numerically. The range of integration is selected for convenience and could be extended over any path that covers x_{c} to obtain the same spectrum. In the limit c/C_{c} → ∞, Eq. (6) gives the solutions , and with j = 0, 1, 2… We denote these as the bare cavity frequencies, describing uncoupled cavities of length x_{c}, and L − x_{c}, and with inductance per unit length of ℓ_{L}, and ℓ_{R}, respectively. For finite but still small capacitance C_{c}, placed close to the center of the cavity, the lowestenergy pair of modes have nearly equal energy at the cavity resonance point ω_{1} ≈ ω_{2}, separated only by the cavity interaction energy . Far away from this resonance, the lowest frequencies, ω_{1}, and ω_{2}, are approximately equal to and such that if , we find and , and if , we obtain and . This is illustrated in Fig. 2(b), which shows the frequencies of the two lowestenergy modes as a function of . The dependence of the spectrum on the cavity parameters is reflected in the mode profiles [Fig. 2(a)], in which the amplitude of the fundamental mode is predominantly located in the lefthand side of the cavity for . In Fig. 2(a), the modification of the mode profile is examined with respect to a magnetic flux Φ threading each of the identical control SQUIDs inserted into the left cavity. For the purpose of interpreting Fig. 2(a), it suffices to note that ℓ_{L} ~ 1/cos(πΦ/Φ_{0}), where Φ_{0} = h/2e is the flux quantum, [see Eq. (12)] so that decreasing Φ corresponds to increasing . Increasing subsequently shifts the mode profile primarily to the righthand side of the cavity, via an intermediate resonance region in which the amplitude on the left and right is comparable. We therefore refer to these modes as left and right photon excitations, in order to indicate their most probable position in the cavity. This convention is well justified away from cavitycavity resonance. Close to the resonance point the distinction between left and right is somewhat arbitrary, nevertheless to simplify the discussion we maintain this convention.
We perform the standard quantization of the system, as outlined in the Methods section, to find the decomposition of the operator describing the integral of the charge density, . The quantization yields where , and and â_{j}(t) are the standard bosonic creation and annihilation operators for the j^{th} photon mode in the Heisenberg picture, respectively. Applying the same notation, we can also write the cavity Hamiltonian as . The current operator, , assumes the form and the operator for the voltage in the cavity, , is given by
Cavity–qubit coupling
We assume that the qubit is introduced at the position x_{q} > x_{c}, and consider it to be a Cooperpair box described by a Hamiltonian where C_{Σ} = C_{J} + C_{Q} + C_{0} is the total capacitance of the Cooper pair box, C_{J} is the capacitance of the Josephson junction defining the superconducting island, C_{Q} is the coupling capacitance, C_{0} is the selfcapacitance of the superconducting island, and and are the operators for the voltage and superconducting phase difference across the junction. The Josephson and charging energies of the box are defined as E_{J} and E_{C} = (2e)^{2}/C_{Σ}, respectively. The cavity–qubit interaction Hamiltonian is given by which, after performing the rotating wave approximation^{38}, takes the form^{2} . The operators , and correspond to excitation, and deexcitation of the qubit in the energy eigenbasis, respectively. The effect of the cavity–qubit coupling capacitance on the cavity modes is neglected. By employing Eq. (9), we may identify the coupling strength g_{j} between the qubit and the j^{th} cavity mode as where we assumed that the qubit is in the charging regime E_{C} ≫ E_{J}, and we operate it at the charge degeneracy point. We denote the elementary charge by e. In the transmon limit for which E_{J} ≫ E_{C}, the coupling strength becomes^{39}
Realizing a tunable inductance for the dissipative cavity
Let us make the qubit–cavity interaction tunable by inserting one or more SQUIDs distributed evenly throughout the dissipative cavity. Similar approaches providing an inhomogeneous and tunable coupling between the qubit and the cavity have been previously studied^{40,41}. Moreover, inserting SQUIDs to control the features of the cavity has attracted recent interest^{42,43,44}. The setup is shown schematically in Fig. 1 for the case of a single SQUID. Each SQUID is modelled as a linear inductor L_{J}(Φ) = Φ_{0}/(4πI_{c}_{0} cos(πΦ/Φ_{0})), I_{c}_{0} being the critical current of each identical Josephson junction comprising the SQUID, and Φ the magnetic flux through the SQUID. We can thus modify the effective inductance of the center conductor of the cavity by varying Φ. In the following, we show that this can have a large impact on the eigenfrequencies and mode profiles, which may in turn affect the cavity–qubit coupling, the eigenstates of the system Hamiltonian, and the transition rates due to the bath coupling substantially. In addition to the setup described in this paper, we expect that tunability can be obtained by inserting a SQUID array at the end of the cavity connecting the center conductor to the ground plane but for simplicity we will refrain from discussing this case.
A simple but effective approximation to account for the effect of the SQUIDs on the system is to consider only the induced change in the average inductance per unit length in the left cavity as where n_{s} is the number of SQUIDs of equal inductance, and is the intrinsic inductance per unit length of the center conductor. In order to approximate the effect of the SQUIDs as a uniform inductance in this manner, their number must be significantly large but a qualitative correspondence should be achievable even for a small number. In considering only the inductance of the SQUIDs, we have neglected their parallel capacitances C_{J′}. This is a valid approximation when the signal frequency is low compared to the plasma frequency of the SQUID, . In practice, it is possible to reproducibly fabricate SQUIDs with ω_{p} higher than 2π × 70 GHz; such values are several times higher than the typical frequencies considered here.
Interaction of the resistor with the cavity modes
In this section, we incorporate a resistor of resistance R, located at x_{r} < x_{c}, into our model for the capacitormodified cavity. The average voltage across the resistor vanishes but the voltage noise from the resistor has the Johnson–Nyquist spectral density with T the temperature of the electrons in the resistor. We restrict our analysis only to those systems in which the coupling between the photonic modes and the resistor is weak. This weak coupling criterion is guaranteed provided that the resistor is situated where the current mode amplitude is small and/or the resistor has sufficiently small magnitude in comparison to the characteristic impedance of the cavity . In this limit we can arrive at a relatively simple analytic result for the resistor–cavity interaction Hamiltonian by utilizing the procedure described in Ref. 22, and reviewed in the Methods section, in which the bath couples to the cavity via the voltage fluctuations across the resistor. This results in an interaction term where is the operator for the voltage fluctuation over the resistor.
Applying Fermi's golden rule to an interaction Hamiltonian in the form of Eq. (14) yields transition rates between the eigenstates of the cavity–qubit Hamiltonian without the coupling to the environment. The transition rate from the mth eigenstate to the lth eigenstate is given by where ω_{ml} = (E_{l} − E_{m})/ℏ, and S_{δV}(ω) is the spectral density of the voltage noise given in Eq. (13).
Resistorinduced transition rates
The total Hamiltonian of the complete cavity–resistor–qubit system, shown in Fig. 1, is We first consider only the cavity and qubit terms, i.e., the cavity Hamiltonian , the qubit Hamiltonian, for which we assume the usual form, , and the cavity–qubit coupling term, . Here is the Pauli Zoperator given in the basis of the two lowest energy eigenstates of the qubit, and acting nontrivially only on the qubit state. In general, the number of modes required for an accurate description of the dynamics depends on the effective bath temperature. Since we assume low temperatures compared with the cavity frequencies, we may consider only the lowest pair of modes in our analysis. We therefore take , and . As above, the subscripts L and R denote the left and right cavity modes, where ω_{L} = ω_{1}, ω_{R} = ω_{2}, if the left cavity is tuned below the cavity resonance point, and ω_{R} = ω_{1}, ω_{L} = ω_{2}, above it. We write the Hamiltonian in the basis σ, n_{L}, n_{R}〉, which is a tensor product of the qubit state σ〉 (σ = g, e), and the photon number states, n_{L}〉, and n_{R}〉. Here, n_{L} is the population of the mode with frequency ω_{L}, and n_{R} is the population of the mode with frequency ω_{R}. Far detuned in the frequency space from either the cavity–cavity, or cavity–qubit resonances, we are able to identify eigenstates of the cavity–qubit system which are, to good approximation, equivalent to the excited states g, 1, 0〉, g, 0, 1〉, and e, 0, 0〉, and hence we refer to these eigenstates as leftphoton–like, rightphoton–like, and qubitlike, respectively. Close to cavity–qubit resonance, these photonlike eigenvectors will have a significant qubit component and viceversa, and hence this correspondence is no longer strictly applicable. Nevertheless, studying these eigenvectors still yields much insight into the dynamics of the system.
The resistor acts as an environment for the cavity–qubit system through the interaction term, . We take Ĥ_{int} to be a weak perturbation which stimulates transitions between the different eigenstates of the pure system without the environment due to the presence of the resistor. The system is linear in the weak coupling limit and hence there is no direct interaction between the modes. The interaction Hamiltonian therefore remains in the form , where has two components in Eq. (14), one for each mode. We access the solution of this system numerically, and calculate the transition rates between each of the eigenvectors using Eq. (15).
Figure 3 shows the transition rates for the qubitlike and photonlike eigenstates as functions of ℓ_{L}. The behaviour of the photonlike transition rates can be explained by referring to Fig. 2(a). If the cavities are far detuned from cavity–cavity resonance, the eigenstates of Ĥ_{cav} correspond closely to a photonic excitation in either the left or the right of the dividing capacitor, C_{c}, as evident by the mode amplitudes being predominantly on either side. The leftphoton–like eigenstates always have a large g, 1, 0〉 component, and thus high amplitude at the position of the resistor. These leftphoton–like states therefore decay very quickly. In contrast, for most values of ℓ_{L}, the rightphoton–like states are approximately equivalent to the states g, 0, 1〉, which have a much smaller amplitude at x_{r}, and thus the right–photon–like states are protected from decay. As the cavity–cavity resonance point is approached, the rightphoton–like eigenstate obtains an increased amplitude at the resistor and, hence decays rapidly, resulting in a peak of several orders of magnitude in the decay rate.
The qubitlike state couples to the resistor only indirectly via the cavities. To achieve a strong qubit–photon coupling requires a large mode amplitude at the position of the qubit in the right cavity, while to achieve a large photon–resistor coupling requires a large mode amplitude at the position of the resistor in the left cavity. In most frequency regimes, it is therefore not possible to simultaneously strongly couple the qubit to the mode, and the mode to the resistor. Only if the qubitlike eigenstate is in resonance with the left cavity, and hence a superposition with a significant g, 1, 0〉 component, does this eigenstate decay quickly. We would like to emphasize that such decay is achieved at resonance even if the cavitycavity detuning is negative. In Fig. 4, the decay rate for the qubitlike eigenstate is shown as a function of both ω_{Q}, and . The behaviour of the qubit rate shown in Fig. 3, can be recovered by taking a horizontal trace through Fig. 4, and is marked with a dashed line. Furthermore, the additional degree of freedom provided by selecting the qubit frequency, equivalent to scanning vertically through Fig. 4, gives access to an even wider range of decay rates. Most notably, around full resonance, , qubit lifetimes of only a few nanoseconds are predicted. In summary, we can move the system to the leftcavity–qubit resonance point and quickly reset the state of the qubit, or to the cavity–cavity resonance point in order to reset the photon state. By utilizing also the tunability of the qubit, we may bring both cavities and the qubit into joint resonance, and rapidly initialise the entire system. Alternatively, by detuning both the cavities from each other, as well as the qubit, we can simultaneously protect both the photon in the right cavity, and the qubit from decay.
In addition to tuning the frequency of the qubit and the left cavity, our setup can utilize SIN thermometry, which gives us control of the resistor temperature, T. In the simplest application of such thermometry, the resistor is implemented using a voltage biased SIN junction^{20,21} where the normal metal island acting as the resistor is formed at the center conductor. The existence of the gap in the density of states of the superconductor prevents electrons in this energy range from tunnelling out of the normal metal. By applying a suitable bias voltage, we can effectively modify the Fermi distribution of the island allowing for the temperature control. In general, there is backaction from the SIN junction to the cavity but this can be made insignificant with current technologies^{20,21}. The effect of the resistor temperature on the qubit decay can be studied if we define an effective qubit temperature^{45} where we assume that the system is in quasiequilibrium. The rates Γ_{±} refer to the excitation and relaxation rates for the qubit, respectively. In calculating T_{eff}, we may phenomenologically account for external noise sources by adding intrinsic excitation and relaxation rates to the rates calculated with Eq. (15) which result from the presence of the resistor. In Fig. 5, we show the effective qubit temperature as a function of the resistor temperature for two cases of a bare leftcavity frequency close to resonance with the qubit, or detuned from the qubit frequency. We note that by changing the resistor temperature, the effective qubit temperature is almost constant in the detuned case, as the qubit is effectively decoupled from the artificial environment. If the left cavity is brought close to resonance with the qubit, where the artificial environment couples strongly to the qubit, T_{eff} may be decreased drastically.
Discussion
In summary, we have presented a system in the framework of circuit quantum electrodynamics for which an engineered resistor is able to act as the dominant environment for a qubit. Unlike the natural environment, which can have unpredictable effects and may also be a source of particularly problematic highfrequency noise, we can conveniently control this artificial environment. We demonstrate that both the photon and qubit lifetimes can separately be tuned over many orders of magnitude. This allows for rapid initialization, or essentially unhindered operation of the cavity–qubit system as desired. A similar operating principle was also recently studied for a system utilizing coupled LC resonators^{46} complementing our results. By employing techniques from SIN tunnel junction thermometry, we may not only determine the temperature of the artificial environment with high accuracy, but are also able to control it. With these techniques, variations of the resistor temperature over a range of several hundred millikelvins are attainable^{20,21}, providing control over the effective temperature of the qubit.
Our work presents an efficient means to utilize normalmetal components within a cQED framework, and is likely to inspire further developments in this direction in order to expand the toolbox of cQED. Though undoubtedly experimentally challenging, the parameters used in our analysis have been selected in line with what is currently achievable^{47}, and thus we expect these results to be experimentally reproducible.
Methods
Quantization of the cavity
We begin by rewriting the Lagrangian of Eq. (1) in the form where Eq. (3) and the orthonormality of the modes have been used. The Hamiltonian is then constructed as the Legendre transform of the Lagrangian density, that is . Promoting and T_{j} to operators with the requirement , results in a Hamiltonian which is diagonal in the cavity number basis, , where we defined where and â_{j}(t) are the bosonic creation and annihilation operators of the j^{th} photon mode.
Resistor–cavity coupling
We calculate the interaction Hamiltonian as the difference in the energy of the resistor–cavity system for the instances in which the resistor does and does not interact with the modified cavity. The Hamiltonian can be found by integrating the energy density in the cavity along its length. In the noninteracting situation, this process results in the Hamiltonian , where Î is the current operator, and the voltage operator in the cavity, given by Eqs. (8) and (9), respectively. The resistor Hamiltonian is Ĥ_{R}, which we may consider to describe an infinite bath of harmonic oscillators, though the explicit form of Ĥ_{R} will play no role in our analysis. For the case in which the resistor and the cavity interact, the calculation is marginally more involved. We proceed similarly to the noninteracting setup and write Here is the timedependent resistorinduced shift in the voltage on the left (right) side of the resistor. As in Ref. 22, the second order terms in as well as the fluctuations in the current operator, δI ≪ δV/R are neglected due to the fact that the the fluctuations are weak and the resistor is situated close to the end of the cavity. Denoting the voltage operator on the left of the capacitor by and on the right by , Performing the integrals we obtain Eq. (14), the weakcoupling interaction Hamiltonian where we have defined the total voltage fluctuation and used the continuity of at x_{c}. We note, by comparison with Ref. 22, that the introduction of the capacitor does not affect the functional form of the interaction Hamiltonian although it affects .
References
 1.
You, J. Q. & Nori, F. Quantum information processing with superconducting qubits in a microwave field. Phys. Rev. B 68, 064509 (2003).
 2.
Blais, A., Huang, R. S., Wallraff, A., Girvin, S. M. & Schoelkopf, R. J. Cavity quantum electrodynamics for superconducting electrical circuits: An architecture for quantum computation. Phys. Rev. A 69, 062320 (2004).
 3.
Wallraff, A. et al. Strong coupling of a single photon to a superconducting qubit using circuit quantum electrodynamics. Nature (London) 431, 162–167 (2004).
 4.
Blais, A. et al. Quantuminformation processing with circuit quantum electrodynamics. Phys. Rev. A. 75, 032329 (2007).
 5.
You, J. Q. & Nori, F. Superconducting Circuits and Quantum Information. Phys. Today 58, 42–47 (2005).
 6.
You, J. Q. & Nori, F. Atomic physics and quantum optics using superconducting circuits. Nature (London) 474, 589–597 (2011).
 7.
Xiang, Z.L., Ashhab, S., You, J. Q. & Nori, F. Hybrid quantum circuits: Superconducting circuits interacting with other quantum systems. Rev. Mod. Phys. 85, 623 (2013).
 8.
Buluta, I. & Nori, F. Quantum Simulators. Science 326, 108–111 (2009).
 9.
Buluta, I., Ashhab, S. & Nori, F. Natural and artificial atoms for quantum computation. Rep. Prog. Phys. 74, 104401 (2011).
 10.
Deppe, F. et al. Twophoton probe of the JaynesCummings model and controlled symmetry breaking in circuit QED. Nat. Phys. 4, 686–691 (2008).
 11.
Fink, J. M. et al. Climbing the JaynesCummings ladder and observing its nonlinearity in a cavity QED system. Nature (London) 454, 315–318 (2008).
 12.
Liu, Y.x., You, J. Q., Wei, L. F., Sun, C. P. & Nori, F. Optical Selection Rules and PhaseDependent Adiabatic State Control in a Superconducting Quantum Circuit. Phys. Rev. Lett. 95, 087001 (2005).
 13.
Mariantoni, M. et al. Photon shell game in threeresonator circuit quantum electrodynamics. Nat. Phys. 7, 287–293 (2011).
 14.
Paik, H. et al. Observation of High Coherence in Josephson Junction Qubits Measured in a ThreeDimensional Circuit QED Architecture. Phys. Rev. Lett. 107, 240501 (2011).
 15.
Niemczyk, T. et al. Circuit quantum electrodynamics in the ultrastrongcoupling regime. Nat. Phys. 6, 772–776 (2010).
 16.
Meschke, M., Guichard, W. & Pekola, J. P. Singlemode heat conduction by photons. Nature (London) 444, 187–190 (2006).
 17.
Ojanen, T. & Heikkilä, T. T. Photon heat transport in lowdimensional nanostructures. Phys. Rev. B 76, 073414 (2007).
 18.
Schmidt, D. R., Schoelkopf, R. J. & Cleland, A. N. PhotonMediated Thermal Relaxation of Electrons in Nanostructures. Phys. Rev. Lett. 93, 045901 (2004).
 19.
Pascal, L. M. A., Courtois, H. & Hekking, F. W. J. Circuit approach to photonic heat transport. Phys. Rev. B 83, 125113 (2011).
 20.
Muhonen, J. T., Meschke, M. & Pekola, J. P. Micrometrescale refrigerators. Rep. Prog. Phys. 75, 046501 (2012).
 21.
Giazotto, F., Heikkilä, T. T., Luukanen, A., Savin, A. M. & Pekola, J. P. Opportunities for mesoscopics in thermometry and refrigeration: Physics and applications. Rev. Mod. Phys. 78, 217–274 (2006).
 22.
Jones, P. J., Huhtamäki, J. A. M., Tan, K. Y. & Möttönen, M. Singlephoton heat conduction in electrical circuits. Phys. Rev. B 85, 075413 (2012).
 23.
Jones, P. J., Huhtamäki, J. A. M., Partanen, M., Tan, K. Y. & Möttönen, M. Tunable singlephoton heat conduction in electrical circuits. Phys. Rev. B 86, 035313 (2012).
 24.
DiVincenzo, D. The physical implementation of quantum computation. Fortschr. Phys. 48, 771–783 (2000).
 25.
Wendin, G. & Shumeiko, V. Handbook of Theoretical and Computational Nanotechnology (American Scientific Publishers, Los Angeles, 2006).
 26.
Valenzuela, S. O. et al. MicrowaveInduced Cooling of a Superconducting Qubit. Science 314, 1589–1592 (2006).
 27.
You, J. Q., Liu, Y.x. & Nori, F. Simultaneous Cooling of an Artificial Atom and Its Neighboring Quantum System. Phys. Rev. Lett. 100, 047001 (2008).
 28.
Grajcar, M., Ashhab, S., Johansson, J. R. & Nori, F. Lower limit on the achievable temperature in resonatorbased sideband cooling. Phys. Rev. B 78, 035406 (2008).
 29.
Grajcar, M. et al. Sisyphus cooling and amplification by a superconducting qubit. Nat. Phys. 4, 612–616 (2008).
 30.
Reed, M. D. et al. Fast reset and suppressing spontaneous emission of a superconducting qubit. App. Phys. Lett. 96, 203110 (2010).
 31.
Johnson, J. E. et al. Heralded State Preparation in a Superconducting Qubit. Phys. Rev. Lett. 109, 050506 (2012).
 32.
Ristè, D., van Leeuwen, J. G., Ku, H.S., Lehnert, K. W. & DiCarlo, L. Initialization by Measurement of a Superconducting Quantum Bit Circuit. Phys. Rev. Lett. 109, 050507 (2012).
 33.
Zhou, L., Gong, Z. R., Liu, Y.x., Sun, C. P. & Nori, F. Controllable Scattering of a Single Photon inside a OneDimensional Resonator Waveguide. Phys. Rev. Lett. 101, 100501 (2008).
 34.
Zhou, L., Dong, H., Liu, Y.x., Sun, C. P. & Nori, F. Quantum supercavity with atomic mirrors. Phys. Rev. A 78, 063827 (2008).
 35.
Zhou, L., Yang, S., Liu, Y.x., Sun, C. P. & Nori, F. Quantum Zeno switch for singlephoton coherent transport. Phys. Rev. A 80, 062109 (2009).
 36.
Liao, J.Q. et al. Controlling the transport of single photons by tuning the frequency of either one or two cavities in an array of coupled cavities. Phys. Rev. A 81, 042304 (2010).
 37.
Yurke, B. & Denker, J. Quantum network theory. Phys. Rev. A 29, 1419–1437 (1984).
 38.
Walls, D. F. & Milburn, G. J. Quantum Optics, 2nd ed.(Springer, Berlin, 2008).
 39.
Koch, J. et al. Chargeinsensitive qubit design derived from the Cooper pair box. Phys. Rev. A 76, 042319 (2007).
 40.
Ian, H., Liu, Y.x. & Nori, F. Excitation spectrum for an inhomogeneously dipolefieldcoupled superconducting qubit chain. Phys. Rev. A 85, 053833 (2012).
 41.
López, C. E., Christ, H., Retamal, J. C. & Solano, E. Effective quantum dynamics of interacting systems with inhomogeneous coupling. Phys. Rev. A 75, 033818 (2007).
 42.
Johansson, J. R., Johansson, G., Wilson, C. M. & Nori, F. Dynamical Casimir Effect in a Superconducting Coplanar Waveguide. Phys. Rev. Lett. 103, 147003 (2009).
 43.
Johansson, J. R., Johansson, G., Wilson, C. M. & Nori, F. Dynamical Casimir effect in superconducting microwave circuits. Phys. Rev. A 82, 052509 (2011).
 44.
Wilson, C. M. et al. Dynamical Casimir effect in superconducting microwave circuits. Nature (London) 479, 376–379 (2011).
 45.
Clerk, A. A., Devoret, M. H., Girvin, S. M., Marquardt, F. & Schoelkopf, R. J. Introduction to quantum noise, measurement, and amplification. Rev. Mod. Phys. 82, 1155–1208 (2010).
 46.
Jones, P. J., Salmilehto, J. & Möttönen, M. Highly controllable qubitbath coupling based on a sequence of resonators. eprint arXiv:1304.4829 (2013).
 47.
Göppl, M. et al. Coplanar waveguide resonators for circuit quantum electrodynamics. J. Appl. Phys. 104, 113904 (2008).
Acknowledgements
We have received funding from the Academy of Finland through its Centres of Excellence Program under Grant No. 251748, in addition to Grants No. 138903, and No. 135794. The Väisälä Foundation, the Finnish National Doctoral Programme in Materials Physics (NGSMP), and the European Research Council under Grant Agreement No. 278117 (SINGLEOUT) are acknowledged for financial support. We acknowledge CSC IT Center for Science Ltd. for the allocation of computational resources.
Author information
Affiliations
QCD Labs, COMP Centre of Excellence, Department of Applied Physics, Aalto University, P.O. Box 13500, FI00076 Aalto, Finland
 P. J. Jones
 , J. A. M. Huhtamäki
 , J. Salmilehto
 , K. Y. Tan
 & M. Möttönen
Low Temperature Laboratory (OVLL), Aalto University, P.O. Box 13500, FI00076 Aalto, Finland
 M. Möttönen
Authors
Search for P. J. Jones in:
Search for J. A. M. Huhtamäki in:
Search for J. Salmilehto in:
Search for K. Y. Tan in:
Search for M. Möttönen in:
Contributions
P.J.J. and J.S. wrote the manuscript text. P.J.J. performed the numerical calculations. J.A.M.H. and K.Y.T. provided important ideas at various stages throughout the project. M.M. provided extensive feedback, and corrections for the manuscript. All authors discussed the results.
Competing interests
The authors declare no competing financial interests.
Corresponding author
Correspondence to J. Salmilehto.
Rights and permissions
This work is licensed under a Creative Commons AttributionNonCommercialNoDerivs 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/byncnd/3.0/
To obtain permission to reuse content from this article visit RightsLink.
About this article
Further reading

Fluxtunable heat sink for quantum electric circuits
Scientific Reports (2018)

Efficient protocol for qubit initialization with a tunable environment
npj Quantum Information (2017)

Quantumlimited heat conduction over macroscopic distances
Nature Physics (2016)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.