Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

HYSOGs250m, global gridded hydrologic soil groups for curve-number-based runoff modeling

An Author Correction to this article was published on 26 February 2019


Hydrologic soil groups (HSGs) are a fundamental component of the USDA curve-number (CN) method for estimation of rainfall runoff; yet these data are not readily available in a format or spatial-resolution suitable for regional- and global-scale modeling applications. We developed a globally consistent, gridded dataset defining HSGs from soil texture, bedrock depth, and groundwater. The resulting data product—HYSOGs250m—represents runoff potential at 250 m spatial resolution. Our analysis indicates that the global distribution of soil is dominated by moderately high runoff potential, followed by moderately low, high, and low runoff potential. Low runoff potential, sandy soils are found primarily in parts of the Sahara and Arabian Deserts. High runoff potential soils occur predominantly within tropical and sub-tropical regions. No clear pattern could be discerned for moderately low runoff potential soils, as they occur in arid and humid environments and at both high and low elevations. Potential applications of this data include CN-based runoff modeling, flood risk assessment, and as a covariate for biogeographical analysis of vegetation distributions.

Design Type(s) data integration objective • source-based data transformation objective
Measurement Type(s) wetness of soil
Technology Type(s) computational modeling technique
Factor Type(s) depth
Sample Characteristic(s) Earth (Planet) • structure of soil • bedrock • groundwater

Machine-accessible metadata file describing the reported data (ISA-Tab format)

Background & Summary

Soils have a fundamental role in the global hydrologic cycle by governing rainfall infiltration and groundwater recharge, which ultimately affects the lateral transport of water and subsequent runoff potential. Knowledge of soil hydraulic properties is therefore of interest to ecologists, hydrologists, and soil scientists, and is critical for parameterization of a variety of empirical and physically-based hydrologic models, dynamic-vegetation models, and land-surface models13.

The U.S. Department of Agriculture (USDA) curve-number (CN) method provides a simplified approach to the estimation of key hydrologic processes while being grounded in a physical understanding of saturated flow and runoff processes46. The CN method avoids the problems inherent to parameterizing and running more complex models due to its simplicity and relatively low data input requirements, and has been implemented in a variety of hydrologic, erosion, and water-quality models79. CN selection is derived from the hydrologic response of various combinations of soil types and land cover classes2,10. Particularly relevant to the subject of this analysis, and the data product we make available, is the classification and development of soil parameters for CN-based runoff modeling. The lack of globally consistent data derived from contemporary soil information served as the overarching motivation for this analysis.

CN-based runoff estimates require information regarding the minimum infiltration rate of rainfall into the soil and the transmission rate of groundwater through the soil profile after prolonged wetting. Runoff occurs when the rainfall rate exceeds the infiltration capacity of soils. The rate at which these processes occur is primarily affected by the physical nature of soils (e.g., texture, compaction), in addition to land cover, antecedent moisture, and rainfall intensity. For example, coarse-textured sandy soils have larger pore spacing, allowing water to infiltrate quickly relative to fine-textured clay soils.

Soils are thus classified into four hydrologic soil groups (HSGs) to infer runoff potential (Table 1)11. HSG-A has the lowest runoff potential (typically contains more than 90% sand and less than 10% clay), HSG-B has moderately low runoff potential (typically contains between 10 to 20% clay and 50 to 90% sand), HSG-C has moderately high runoff potential (typically contains between 20 to 40% clay and less than 50% sand), and HSG-D has high runoff potential (typically contains more than 40% clay and less than 50% sand). Classification is determined by the least transmissive soil layer—often measured as saturated hydraulic conductivity (Ks)—depth to water table or depth to an impermeable layer (e.g., duripan, bedrock). If Ks is unknown or not available, infiltration and transmission rates can be inferred from soil texture, with the underlying assumption that soils with similar content of sand, silt, and clay have analogous hydraulic properties1214. Wet soils have high runoff potential (regardless of texture) due to the presence of a groundwater table within 60 cm of the surface. These soils are assigned dual HSGs, as a less restrictive group can be assigned (according to texture or KS) if they can be adequately drained.

Table 1 Hydrologic soil groups (HSGs) classification scheme.

We derived HSGs from texture classes in accordance with USDA11 specifications (Table 1). The resulting data product—HYSOGs250m—represents typical soil runoff potential suitable for regional, continental, and global scale analyses and is available in a gridded format at a spatial resolution of 250 m (Fig. 1).

Figure 1: Global distribution of hydrologic soil groups.

Hydrologic soil groups A, B, C, and D correspond to low, moderately low, moderately high, and high runoff potential, respectively. Wet soils are assigned a dual HSG (e.g., HSG A/D) and have high runoff potential due to the presence of a water table within 60 cm of the surface. A less restrictive group can be assigned if these soils are drained (e.g., HSG-A).

Our analysis indicates that soils with moderately high runoff potential dominate the global distribution (57.4%), followed by soils with moderately low (HSG-B 12.2%), high (HSG-D 10.1%), and low runoff potential (HSG-A 3.0%) (Table 2). Dual HSGs A/D, B/D, C/D, and D/D accounted for 0, 1.4, 13.5, and 2.4% of the global distribution, respectively. Some global trends were observed for soils with high and low runoff potential. Low runoff potential soils are found predominantly in parts of the Sahara and Arabian Deserts, which are characterized by very deep and well-drained sandy soils. High runoff potential soils occur predominantly within tropical and sub-tropical zones (with notable additions occurring in the Alaska-Yukon Arctic and Canadian Taiga and Boreal Shield) and are characterized by soils with high clay content or shallow soils (<50 cm to bedrock). No clear pattern could be discerned for soils with moderately low runoff potential at the global scale, as these HSGs occur in arid and humid environments and at both high and low elevations.

Table 2 Global and continental distribution of hydrologic soil groups (HSGs).


The process for producing HYSOGs250m consisted of five primary steps (Fig. 2). We classified HSGs from USDA-based soil texture classes (Fig. 3), depth to bedrock (Fig. 4), and groundwater table depth (Fig. 5) as specified by the USDA-Natural Resources Conservation Service (USDA-NRCS) National Engineering Handbook (NEH)11. Soil texture classes and depth to bedrock were obtained from the SoilGrids predictions ( Food and Agriculture Organization (FAO) soilGrids250m system15. These data and associated meta-data are available for download as GeoTiffs at Groundwater table depth16 and associated meta-data are available for download as NetCDF at All computations were performed within the R open source environment for statistical computing17 and functions from the raster package18.

Figure 2: Conceptual framework illustrating the workflow used to develop HYSOGs250m.

textStack represents USDA-based soilGrids250m texture classes15 for six depth intervals (0, 5, 15, 30, 60, and 100 cm); hsgStack represents hydrologic soil group (HSGs) classified from each texture class, maxHSG represents HSGs defined by the most restrictive layer (0 to 1 m), R represents bedrock depth15, maxHSGR represents HSGs re-classified to the bedrock depth criteria, and waterTable represents the HSGs reclassified to account for both the depth to bedrock and the water table criteria.

Figure 3: USDA-based soil texture classes.

Adapted from SoilGrids predictions ( Cl is clay, SiCl is silty clay, SaCl is sandy clay, ClLo is clay loam, SiClLo is silty clay loam, SaClLo is sandy clay loam, Lo is loam, SiLo is silty loam, SaLo is sandy loam, Si is silt, LoSa is loamy sand, Sa is sand. Note that mapped texture classes represent the soil surface (0 cm).

Figure 4: Predicted depth to bedrock within 50 cm of the surface.

Adapted from SoilGrids predictions ( Note that individual grid cells (bedrock occurrence) may not be visible at the global scale.

Figure 5: Groundwater table depth.

Adapted from Fan et al.16 Dual hydrologic soil groups were assigned to grid cells (pedons) based upon the presence of a water table (<60 cm of the surface).

Soil texture to 1 m depth was represented with SoilGrids predictions ( soilGrids250m texture classes at six depths: 0, 5, 15, 30, 60, and 100 cm. The soilGrids were stacked into a multi-band raster (textStack) using the raster::stack function (Fig. 2a). For the purpose of this analysis, we refer to individual grid cells (~250 m×250 m) in the raster stack (1 m depth) as soil pedons. Each grid cell in the raster stack (or pedon) was re-classified into one of four HSGs (hsgStack) using the classification scheme reported in Table 1 (Fig. 2b). This allowed us to infer the water transmissivity of each layer in the profile from the stacked texture classes. Note that integers 1, 2, 3, and 4 were used to represent HSGs A, B, C, and D, respectively. The raster::max function (Fig. 2c) was then used to determine the largest value of each grid cell in the raster stack, allowing us to infer the most restrictive layer in the pedon. This value (maxHSG) was used to assign HSGs for each pixel in the stack, thus representing soil runoff potential for each pedon. Shallow soils (bedrock within 50 cm of the surface, Fig. 4) were re-classified to HSG-D (maxHSGR, Fig. 2d). Dual HSGs were assigned to pedons with shallow water tables (<60 cm from the surface) using the depth to groundwater table dataset16 (Fig. 2e). Integers 11, 12, 13, and 14 were used to denote dual HSGs A/D, B/D, C/D, and D/D, respectively.

Code availability

The R code used to develop HYSOGs250m, described in Fig. 2, is available for download from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC) (Data Citation 1).

Data Records

HYSOGs250m (Data Citation 1) is available for download as an un-projected GeoTiff at 7.5 arc-second (approximately 250 m resolution). The value column variables 1, 2, 3, 4, 11, 12, 13, and 14 correspond to HSG A, B, C, D, A/D B/D, C/D, and D/D, respectively.

Technical Validation

We briefly describe uncertainty assessments of the SoilGrids predictions ( and groundwater table depth16 data that were used as input for our analysis; however, readers are referred to the corresponding publications for a detailed description of the methods and uncertainty analysis.


Soil profile data was compiled by the FAO from approximately 150,000 unique sites covering every continent; however, the tropics, semi-arid to hyper-arid regions, and mountain regions were underrepresented15. Furthermore, soils with high runoff potential are likely under-estimated due to the uncertainty associated with depth to bedrock15. However, their depth to bedrock models performed reasonably well, and explained more than 50% of the global variation (R2=0.54).

Accuracy assessment was performed with 10-fold repeated cross-validation using soil profile data from ca. 150 000 globally distributed sites used to develop soilGrids250m15. In all instances, the amount of variation explained by the soil texture models was higher than 72.6%; root mean square error (RMSE) was lowest for clay (9.5%), followed by silt (9.8%), and sand (13.1%)15.

Groundwater table depth

A total of 1,603,781 well sites were compiled from government archives and published literature to generate predictions of global groundwater table depth16. On average, the modeled groundwater table was 1.62 m (±17.91 m) lower than observations at the global scale. Note that local, perched aquifers were not modeled16. Groundwater pumping, drainage, and irrigation were not represented, thus neglecting the local complexity of human influence and only capturing the broad-scale patterns of groundwater16.

Comparison with other datasets

Hong and Adler19 reported that the global distribution of soils was dominated by moderately low runoff potential (36.8%), followed by high (25.3%), low (20.5%), and moderately high (17.4%) runoff potential. Although this is in stark contrast with what we report, these discrepancies are largely attributed to different classification schemes (Table 1), and to a lesser extent, different methodologies.

For comparative purposes only, we used the same classification scheme reported by Hong and Adler12,19. This comparison revealed that the distribution of the two datasets were in closer agreement, and that soils are dominated by moderately low runoff potential (37%), followed by high (32%), low (17%), and moderately high (15%) runoff potential. However, it is important to note that the classification scheme reported by Hong and Adler was based on earlier work by Musgrave13 using rainfall, runoff, and infiltrometer measurements13, a practice that has since been abandoned by the USDA11. Furthermore, the deprecated classification scheme does not account for the presence of impermeable layers (e.g., bedrock) or depth to groundwater table.

Other considerations

Note that substantial variation can exist within and between soil texture classes and their respective hydraulic properties (Fig. 6). According to the revised NEH11, HSG-A typically consists soils classified as sand (e.g, more than 90% sand and less than 10% clay content), but can include loamy sand, sandy loam, loam, or silt loam. Likewise, HSG-B typically consists of loamy sand and sandy loam, but can contain loam, silt loam, silt, or sandy clay loam, while HSG-C typically consists of loam, silt loam, sandy clay loam, clay loam, and silty clay loam, but can include clay, silty clay, and sandy clay textures11.

Figure 6: Distribution of hydrologic soil groups for select regions.

(a) Southeast US, (b) Southeast Asia, (c) northern South America, (d) Australia.

Usage Notes

Users of this dataset should be aware that HYSOGs250m represents general patterns of soil runoff potential appropriate for regional- to global-scale analyses and may not capture the local variance suitable for fine-scale applications. Although originally developed to support CN-based computations of rainfall runoff, HYSOGs250m can be used as a covariate for empirical analyses investigating various soil-environmental relationships. For example, plant and/or animal species distributions are often related to soil texture, plant available water, and groundwater. HYSOGs250m may be a useful covariate to further explain such relationships, as these data were produced by incorporating depth to bedrock, depth to groundwater table, and soil texture classes. These data can also be used for flood risk assessment and suitability mapping. End-users who are not interested in dual HSGs may simply re-classify HSGs A/D, B/D, C/D, and D/D to HSG-D.

Additional information

How to cite this article: Ross, C. W. et al. HYSOGs250m, global gridded hydrologic soil groups for curve-number-based runoff modeling. Sci. Data 5:180091 doi: 10.1038/sdata.2018.91 (2018).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.



  1. 1

    Manabe, S. Climate and the ocean circulation. Mon. Weather Rev. 97, 739–774 (1969).

    ADS  Article  Google Scholar 

  2. 2

    Miller, D. A. & White, R. A. A conterminous United States multilayer soil characteristics dataset for regional climate and hydrology modeling. Earth Interact. 2, 1–26 (1998).

    Article  Google Scholar 

  3. 3

    Breuer, L. et al. Assessing the impact of land use change on hydrology by ensemble modeling (LUCHEM). I: Model intercomparison with current land use. Adv. Water Resour. 32, 129–146 (2009).

    ADS  Article  Google Scholar 

  4. 4

    Boughton, W. C. A review of the USDA SCS curve number method. Soil Res 27, 511–523 (1989).

    Article  Google Scholar 

  5. 5

    Hawkins, R. H., Ward, T. J., Woodward, D. E. & Mullem, J. A. V. Curve Number Hydrology: State of Practice. American Society of Civil Engineers. doi:10.1061/9780784410042 (2008).

  6. 6

    Ponce, V. M. & Hawkins, R. H. Runoff curve number: Has it reached maturity? J. Hydrol. Eng. 1, 11–19 (1996).

    Article  Google Scholar 

  7. 7

    Knisel, W. G. CREAMS: a field scale model for Chemicals, Runoff, and Erosion from Agricultural Management Systems [USA]. U. S. Dept Agric. Conserv. Res. Rep. USA, (1980).

    Google Scholar 

  8. 8

    Young, R. A., Onstad, C. A., Bosch, D. D. & Anderson, W. P. AGNPS: A nonpoint-source pollution model for evaluating agricultural watersheds. J. Soil Water Conserv. 44, 168–173 (1989).

    Google Scholar 

  9. 9

    Williams, J. R. The erosion-productivity impact calculator (EPIC) model: a case history. Phil Trans R Soc Lond B 329, 421–428 (1990).

    ADS  Article  Google Scholar 

  10. 10

    Lal, M., Mishra, S. K. & Pandey, A. Physical verification of the effect of land features and antecedent moisture on runoff curve number. CATENA 133, 318–327 (2015).

    Article  Google Scholar 

  11. 11

    USDA. Hydrologic Soil Groups. in National Engineering Handbook: Part 630 - Hydrology (2009).

  12. 12

    Cronshey, R. Urban hydrology for small watersheds. 2nd edition. (U.S. Dept. of Agriculture, Soil Conservation Service, Engineering Division (1986).

  13. 13

    Musgrave, G. How much of the rain enters the soil. Water US Dep. Agric. Yearb 151–159 (1955).

  14. 14

    Saxton, K., Rawls, W., Romberger, J. & Papendick, R. Estimating generalized soil-water characteristics from texture. Soil Sci. Soc. Am. J 50, 1031–1036 (1986).

    ADS  Article  Google Scholar 

  15. 15

    Hengl, T. et al. SoilGrids250m: Global gridded soil information based on machine learning. PLoS ONE 12, e0169748 (2017).

    Article  Google Scholar 

  16. 16

    Fan, Y., Li, H. & Miguez-Macho, G. Global Patterns of Groundwater Table Depth. Science 339, 940–943 (2013).

    CAS  ADS  Article  Google Scholar 

  17. 17

    R Development Core Team. R: A Language and Environment for Statistical Computing. R Foundation for Statistical Computing, (2016).

  18. 18

    Hijmans, R. J. et al. raster: Geographic Data Analysis and Modeling (2016).

  19. 19

    Hong, Y. & Adler, R. F. Estimation of global SCS curve numbers using satellite remote sensing and geospatial data. Int. J. Remote Sens. 29, 471–477 (2008).

    ADS  Article  Google Scholar 

  20. 20

    Shangguan, W. & Hengl, T. & Jesus, J.M. de & Yuan, H. & Dai, Y. Mapping the global depth to bedrock for land surface modeling. Journal of Advances in Modeling Earth Systems 9, 65–88 (2017).

    ADS  Article  Google Scholar 

Data Citations

  1. 1

    Ross, C. W. et al. ORNL Distributed Active Archive Center (2018)

Download references


This research was supported in part by the US National Aeronautic and Space Administration (NASA) as part of the NASA Carbon Cycle Science program (Grant # NNX17AI49G).

Author information




Conceptualization: L.P., N.P.H. Data assimilation, analysis, and visualizations: C.W.R. Funding acquisition: N.H, L.P. Methodology: C.W.R., L.P., N.P.H., S.K., W.J., J.A. Writing – 1st draft: C.W.R. Writing – reviewing and editing: C.W.R., N.P.H., L.P., W.J., S.K., J.A.

Corresponding author

Correspondence to C. Wade Ross.

Ethics declarations

Competing interests

The authors declare no competing interests.

ISA-Tab metadata

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit The Creative Commons Public Domain Dedication waiver applies to the metadata files made available in this article.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Ross, C., Prihodko, L., Anchang, J. et al. HYSOGs250m, global gridded hydrologic soil groups for curve-number-based runoff modeling. Sci Data 5, 180091 (2018).

Download citation


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing