Abstract
The transition-metal-catalysed hydrosilylation reaction of alkenes is one of the most important catalytic reactions in the silicon industry. In this field, intensive studies have been thus far performed in the development of base-metal catalysts due to increased emphasis on environmental sustainability. However, one big drawback remains to be overcome in this field: the limited functional group compatibility of the currently available Pt hydrosilylation catalysts in the silicon industry. This is a serious issue in the production of trichloro(3-chloropropyl)silane, which is industrially synthesized on the order of several thousand tons per year as a key intermediate to access various silane coupling agents. In the present study, an efficient hydrosilylation reaction of allyl chloride with trichlorosilane is achieved using the Rh(I) catalyst [RhCl(dppbzF)]2 (dppbzF = 1,2-bis(diphenylphosphino)-3,4,5,6-tetrafluorobenzene) to selectively form trichloro(3-chloropropyl)silane. The catalyst enables drastically improved efficiency (turnover number, TON, 140,000) and selectivity (>99%) to be achieved compared to conventional Pt catalysts.
Introduction
The hydrosilylation reaction, which achieves the addition of hydrosilanes to alkenes, is one of the most important catalytic reactions in the silicon industry1,2,3,4,5,6. For more than half a century, this reaction has been employed in the production of various organosilicon compounds that are used as synthetic precursors as well as in the curing of silicone products1,2,3,7,8. Another important application of the hydrosilylation reaction is the production of silane coupling agents, which has recently elevated the importance of this reaction greatly. Silane coupling agents, which are usually γ-functionalised propyl silanes of type X(CH2)3Si(OR)3 (X = various functional groups), have the ability to form a durable bond between organic and inorganic materials and to provide the resulting compounds or materials with various properties, such as water and/or heat resistance as well as adhesiveness, without negatively affecting the original properties of either the organic or the inorganic materials9,10,11,12. By taking advantage of such features, silane coupling agents are currently used in a great number of fields including paints, coating, adhesives, semiconductor sealants, and tires.
Trichloro(3-chloropropyl)silane (1) is an important key intermediate to access various silane coupling agents via simple nucleophilic substitution reaction and alcoholysis of trichlorosilyl group13. Thus, 1 is now industrially synthesised on the order of several thousand tons per year via a simple hydrosilylation reaction, i.e. the reaction of allyl chloride with HSiCl3 catalysed by conventional Pt catalysts, such as Speier’s catalyst14 or Karstedt’s catalyst15 (Fig. 1a). However, the relatively low selectivity of the reaction represents a severe drawback6,16,17,18,19,20,21,22,23,24. Pt-catalysed hydrosilylation reactions usually proceed through a (modified) Chalk–Harrod mechanism25,26, which is initiated with the oxidative addition of a hydrosilane to a Pt metal centre, followed by alkene insertion and reductive elimination (Fig. 1b, path 1). In contrast, allyl chloride also exhibits a high propensity to engage in the oxidative addition reaction to form stable π-allyl Pt species; thus, the oxidative addition of two substrates, hydrosilane and allyl chloride, proceeds competitively during the hydrosilylation reaction. Consequently, several side products, including trichloropropylsilane (2), propene and SiCl4, are formed during the hydrosilylation of allyl chloride (Fig. 1b, path 2)6,16,17,18,19,20,21,22,23,24, which causes difficulties in the purification process and sometimes, degradation in the performance of the materials. Given the increasing demand for the precise synthesis of various organosilicon compounds to achieve more sophisticated high-performance materials in recent years, the development of novel catalytic systems that can efficiently catalyse the hydrosilylation of allyl chloride and other allylic compounds with various functionalities is highly desirable6,27,28,29,30,31,32,33,34,35. To date, several mechanistic studies on the hydrosilylation of allyl chloride have been reported18,19,20; however, this industrially important issue has not been sufficiently discussed in academic research, despite the recent dramatic progress in the development of base-metal catalysts for the hydrosilylation of simple alkenes36,37,38,39.
In this study, we achieved efficient hydrosilylation of allyl chloride with HSiCl3 using Rh catalysts that bear bidentate-phosphine ligands40. The precise design of these catalysts, which was developed based on a detailed mechanistic study, successfully improved the performance of the catalysis and enabled excellent efficiency and selectivity (a TON of 140,000 at 5 ppm/Rh and >99% selectivity) to be achieved.
Results
Screening of metal catalysts
The optimisation of the reaction of allyl chloride with HSiCl3 was performed at a catalyst loading of 0.5 mol%/metal at 60 °C for 3 h (Table 1 and Supplementary Fig. 1). Our preliminary experiments using conventional Pt catalysts clearly showed their poor product selectivity. The use of Speier’s and Karstedt’s catalysts resulted in the formation of the hydrosilylated product 1 in low yields of 20% and 15%, respectively (Table 1, entries 1 and 2). The reactions were accompanied by the formation of by-product 2 in 32% and 13% yields, respectively. Additional formation of propane was also confirmed based on the 1H NMR spectra of the reaction mixture. Both the reaction efficiency and selectivity were somewhat improved using a combination of Karstedt’s catalyst and 1,3-dimesitylimidazol-2-ylidene (IMes) (2 equiv/Pt)41, which afforded 1 (53%) and 2 (14%) (Table 1, entry 3). The screening of various metal precursors was performed (Supplementary Table 1). Surprisingly, Ir catalysts, which have been reported to be useful catalysts for hydrosilylation of allyl chloride with HSi(OR)3 or HSiClMe2 hardly catalysed the reaction24,34,42,43,44. On the other hand, the reaction in the presence of classical Wilkinson’s catalyst [RhCl(PPh3)3]45,46,47,48 proceeded with better reaction selectivity to give 1 in 26% yield and 2 in <5% yield (Table 1, entry 4). Therefore, we then moved on to the investigation of Rh catalysts prepared in situ via the reaction of [Rh(μ-Cl)(cod)]2 and various phosphine ligands. For example, similar results to those obtained with Wilkinson’s catalyst were achieved using a combination of [Rh(μ-Cl)(cod)]2 and PPh3 (2 equiv/Rh) to furnish 1 and 2 in 31% and <5% yields, respectively (Table 1, entry 5). The reaction catalysed by [Rh(μ-Cl)(cod)]2 and electron-donating PCy3 ligand gave 1 with a slightly improved yield of 45% (Table 1, entry 6). Further studies revealed that the use of bidentate-phosphine ligands 1,2-bis(diphenylphosphino)ethane (dppe) and 1,3-bis(diphenylphosphino)propane (dppp) significantly improved the reaction yield and selectivity, forming 1 in 76% and 88% yields, respectively (Table 1, entries 7 and 8). The highest yield of 1 (93%) was achieved with 1,2-bis(diphenylphosphino)benzene (dppbz), which was accompanied by the formation of 2 in 7% yield (Table 1, entry 9). The formation of propene was not observed by 1H NMR spectroscopy in any of these Rh-catalysed reactions.
Identification of the catalytically active rhodium complexes
As shown in Table 1, entries 7–9, the choice of the Rh precursor and bidentate ligand combination had a significant influence on the catalytic performance in the systems. To shed light on such diverse effects of the bidentate ligand, stoichiometric reactions of [Rh(μ-Cl)(cod)]2 with the promising ligands, dppp and dppbz, were performed. When the reaction of [Rh(μ-Cl)(cod)]2 with dppp (1 equiv/Rh) was performed at 60 °C for 3 h, the formation of a mixture composed of two complexes, [Rh(μ-Cl)(dppp)]2 (3) (79%) and [RhCl(cod)(dppp)] (4) (6%), was confirmed by 1H and 31P{1H} NMR spectroscopic analysis (Fig. 2a). In contrast, the reaction of [Rh(μ-Cl)(cod)]2 with dppbz (1 equiv/Rh) resulted in the formation of [Rh(μ-Cl)(dppbz)]2 (5) (63%), [(dppbz)Rh(μ-Cl)2Rh(cod)] (6) (26%), and [Rh(dppbz)2]Cl (7) (8%; Fig. 2b). According to these results, we realised that mixing the Rh precursor [Rh(μ-Cl)(cod)]2 and a ligand resulted in the in situ formation of various Rh species with a different molar ratio, which are dependent on the used bidentate ligand. Thus, we examined the catalytic performance of each complexes (Fig. 2c and Supplementary Table 2) which have been independently synthesised according to the alternative procedures (see Supplementary Methods section, page 15 of the Supplementary Information). Complexes 3 and 4 catalysed the hydrosilylation of allyl chloride with HSiCl3 at the catalyst loading of 0.5 mol%/Rh, affording 1 in 60% and 41% yields, respectively. The reaction catalysed by 5 proved to be most efficient among 3–7 under otherwise identical reaction conditions to form 1 in >95% yield. Complex 6, in which only one of the two Rh centres was supported by dppbz, exhibited the significantly suppressed catalytic activity compared to 5. Likewise, complex 7 coordinated with two dppbz ligands hardly catalysed the reaction. In all the above reactions, the formation of only trace amounts of 2 was confirmed. Based on these results, we postulated that chloro-bridged dinuclear complex 5, which could form a reactive mononuclear dppbz-Rh (I) species ‘RhICl(dppbz)’, behave as a good catalyst precursor.
Investigation of effective bidentate-phosphine ligands
Based on the observations discussed above, it became clear that a rigorous evaluation of the ligand effect on the catalytic efficiency should be carried out using independently prepared Rh complexes coordinated with a ligand rather than catalysts prepared in situ by mixing a Rh precursor and a ligand. Accordingly, we then surveyed the catalytic activity of a series of chloro-bridged Rh dimers that bear bidentate-phosphine ligands49,50; the results are summarised in Table 2 (Supplementary Table 3). All the examined reactions resulted in the selective formation of 1 accompanied by only trace amounts of by-product 2. The reactions catalysed by 500 ppm/Rh of [Rh(μ-Cl)(dppe)]2, [Rh(μ-Cl)(dppp)]2 (3), or [Rh(μ-Cl)(dppb)]2 (dppb = 1,4-bis(diphenylphosphino)butane), which possess ligands with an alkyl backbone, were low yielding, affording 1 in 3%, 13%, and 22% yields, respectively, at 60 °C after 20 h (Table 2, entries 1–3). As demonstrated in the experiments shown in Fig. 2c, the use of [Rh(μ-Cl)(dppbz)]2 (5) delivered a better performance (Table 2, entry 4). Using 5, the quantitative formation of 1 was achieved at a lower catalyst loading of 50 ppm/Rh, accompanied by the formation of a trace amount of 2. At a further decreased catalyst loading of 6 (5 ppm/Rh), the reaction afforded 1 in 11% yield (Table 2, entry 5).
We then examined the substituent effect with respect to the diphenylphosphino moieties using catalysts 8 and 9; thus, the introduction of either electron-donating or electron-withdrawing substituents resulted in diminished catalyst performance, leading to the formation of <5% yield of 1 (Table 2, entries 6 and 7). Next, the substituent effect with respect to the phenylene backbone was examined. The use of catalyst [Rh(μ-Cl)(dppbzOMe)]2 (10), which carries 1,2-bis(diphenylphosphino)-3,4-dimethoxybenzene ligands with electron-donating methoxy groups on the phenylene backbone, resulted in the only slight formation of 1 (Table 2, entry 8). In contrast, the use of complex [Rh(μ-Cl)(dppbzF)]2 (11), bearing 1,2-bis(diphenylphosphino)-3,4,5,6-tetrafluorobenzene (dppbzF) with a perfluorophenylene backbone, achieved improved catalytic activity. Thus, the hydrosilylation reaction of allyl chloride with HSiCl3 proceeded in the presence of 50 ppm/Rh of 11 to form 1 in >95% yield at 60 °C after 20 h (Table 2, entry 9). The good yield of 73% (1) was also achieved after the diminished reaction time, 10 h (Table 2, entry 10). Whereas, significant decrease in the yields of 1 was confirmed at a lower temperature (Table 2, entries 11, 12). Gratifyingly, 11 exhibited higher catalytic activity than 5; i.e. the reaction with 5 ppm/Rh of 11 resulted in the formation of 29% yield of 1 (Table 2, entry 13). The yield of 1 further increased to 70%, and only a trace amount of 2 was formed as a side product when 3 equiv of HSiCl3 was used (Table 2, entry 14) (it was confirmed that the yield of 1 was not improved after further reaction time). Under these reaction conditions, the TON of 140,000 was achieved.
Mechanistic considerations
In the Rh-catalysed reactions (Tables 1 and 2), the concomitant formation of 2 was constantly observed albeit in low yields. These results strongly suggest the occurrence of oxidative addition of allyl chloride to the Rh centre during the catalytic reactions51,52,53. To further clarify this point, the reactivity of 11 towards allyl chloride was investigated. Upon treatment with allyl chloride (1 equiv/Rh), 11 was converted into the corresponding oxidative addition product, [Rh(π-allyl)Cl2(dpppbzF)] (12), at ambient temperature (Fig. 3a). The resulting complex 12 further reacted with excess HSiCl3 at 60 °C to form 1 (26%) and 2 (45%), together with other unidentified complexes (Fig. 3b, see Supplementary Information, Supplementary Methods, page 13). The formation of SiCl4 was also confirmed by 29Si{1H} NMR spectroscopic analysis. This result clearly demonstrates the path by which 2 was formed during the catalysis (Fig. 3c, path 1): 12 reacts with HSiCl3 to form [RhCl2(SiCl3)(propene)(dpppbzF)]54,55, which undergoes reductive elimination to form the catalytically active ‘RhICl(dppbzF)’ species and SiCl4. The subsequent hydrosilylation of propene with HSiCl3 results in the formation of 2. Another remarkable feature of this reaction is the formation of 1 (26%) in addition to 2. This observation strongly suggests the occurrence of reductive elimination of allyl chloride from 12 to reproduce ‘RhICl(dppbzF)’ species, which would successively facilitate hydrosilylation of allyl chloride to form 1 (Fig. 3c, path 2). Such the fluctuating ligand behaviour in 12 was also supported by the reaction of 12 with cinnamyl chloride. In the presence of 20 equiv of cinnamyl chloride, 12 was partially transformed to an unidentified complex A (ca. 23% conversion), which could be assignable to [Rh(π-cinnamyl)Cl2(dppbzF)] based on ESI-Mass spectroscopic analysis. In addition, the formation of free allyl chloride (20% NMR yield) was confirmed (Fig. 3d, see Supplementary Information, Supplementary Methods, page 13). The reaction is likely to proceed via the ligand exchange between the allyl ligand and the cinnamyl ligand, thus demonstrating reversible oxidative addition and reductive elimination pathway of allyl chloride.
In contrast, the reaction of [Rh(π-allyl)Cl2(dppp)] (13) with HSiCl3 resulted in the quantitative formation of 2, accompanied by the formation of trace amounts of propene and SiCl4 (Fig. 3e). The reaction also afforded [Rh(Cl)(H)(SiCl3)(dppp)] (14) (91% NMR yield), which should be formed via the oxidative addition of HSiCl3 to the ‘RhI(dppp)’ species that is generated in situ. Indeed, 14 could alternatively be synthesised by the reaction of [Rh(μ-Cl)(dppp)]2 (3) with HSiCl3. Overall, these experimental data strongly support the conclusion that the dppbzF ligand facilitates the reductive elimination of allyl chloride, possibly due to its effective stabilisation of the electron-rich Rh(I) centre.
Proposed catalytic cycle
Based on the experimental results described above as well as on the previous reports23,24,47,56, we postulate a plausible reaction pathway that proceeds in the presence of 11 following a modified Chalk–Harrod mechanism, which is the typical mechanism for Rh-catalysed hydrosilylation reactions (Fig. 4)56,57,58,59,60,61,62. In this pathway, the dinuclear Rh(I) precursor 11 reacts with HSiCl3 to form hydrido(silyl)Rh(III) complex B, which successively undergoes insertion of allyl chloride into the Rh–Si bond. The reductive elimination of the Si–H bond regenerates 11, furnishing the hydrosilylated product. Complex 11 also engage in the oxidative addition of allyl chloride to form 12. The feasibility of this step was confirmed by the mechanistic study discussed above (Fig. 3a). Our mechanistic study suggested that dppbzF facilitates the reductive elimination of allyl chloride from 12 because of its stabilisation of the Rh(I) centre, which in turn enables the selective formation of 1. It could also be possible that electron-withdrawing dppbzF ligand facilitates the insertions step63,64, which is known to be the rate-determining step in the modified Chalk–Harrod process55,56,57,58,59,60,61,62. To further shed light on the effect of dppbzF ligand, a detailed mechanistic study based on DFT study is now underway in our laboratory. Considering the structure of 14, which possesses the hydrido ligand on the basal plane, there is a possibility that the reaction could follow Chalk–Harrod mechanism, where allyl chloride inserts into the Rh–H bond. This point is also a target of our interest in the DFT study.
Gram-scale synthesis
With this powerful catalyst in hand, we attempted the gram-scale synthesis of 1. The reaction of 2.5 mol of allyl chloride with 1 equiv of HSiCl3 in the presence of 50 ppm/Rh of 11 afforded 483 g (2.28 mol) of 1 with excellent selectivity (>99%), which was easily isolated as a pure form after simple distillation procedure (Fig. 5).
This study established the superior utility phosphine-supported Rh catalysts to the conventional Pt catalysts in an industrially important hydrosilylation reaction, i.e. the selective hydrosilylation of allyl chloride with HSiCl3 to form trichloro(3-chloropropyl)silane (1). The precise design of the catalyst structure enabled the development of the new catalyst [Rh(μ-Cl)(dppbzF)]2 (11), which achieved excellent activity and selectivity in the reaction. A detailed mechanistic study revealed that the major side product trichloropropylsilane (2) is formed through successive reactions of the catalyst with allyl chloride and HSiCl3, followed by hydrosilylation of the propene that is generated in situ. This mechanistic study also supports the notion that dppbzF, with an electron-withdrawing backbone, is able to stabilise the electron-rich Rh(I) species and thereby suppress the formation of 2. This fundamental study has led to a dramatic improvement in the selectivity of the reaction and enables the industrially important key compound 1 to be furnished efficiently. This achievement represents a significant step towards resolving one of the biggest unsolved problems in industrial hydrosilylation chemistry, i.e. the limited functional group compatibility of conventionally employed Pt catalysts. The application of the method developed in this study allows the synthesis of 475 g of 1 in pure form. We are convinced that the results of this work will pave the way to new avenues and inspire further research in the area of practical hydrosilylation chemistry, which would translate to innovations in the silicon industry.
Methods
[Rh(μ-Cl)(dppbzF)]2 (11) catalysed hydrosilylation reaction of allyl chloride with HSiCl3
Toluene stock solution of 11 (10 μL, 0.0025 μmol, 0.5 mM) was added to a 10 mL screw vial equipped with a stir bar under a nitrogen atmosphere. After removal of toluene in vacuo, allyl chloride (81 μL, 1.0 mmol), and trichlorosilane (300 μL, 3.0 mmol) were added to the vial. The mixture was stirred at 60 °C for 20 h. After the reaction, mesitylene (14 μL, 0.10 mmol) was added to the mixture as an internal standard and the yield of 3-chloropropyltrichlorosilane (1) and trichloropropylsilane (2) were calculated by 1H NMR (70% and trace). 1. 1H NMR (C6D6, ppm): 0.84 (m, 2H, SiCH2), 1.41 (m, 2H, SiCH2CH2), 2.78 (t, 2H, 3JHH = 6.6 Hz, CH2Cl).
Gram-scale synthesis of 1
A rhodium catalyst 11 (80 mg, 0.060 mmol) was placed in a three-necked flask (3 L) with condenser under a nitrogen atmosphere. Allyl chloride (187 g, 2.45 mol) and trichlorosilane (332 g, 2.45 mol) were added to the flask, and the mixture was stirred at 60 °C for 20 h. After distillation of the resulting solution under the reduced pressure (36 hPa, 80 °C), analytically pure 1 was obtained as a colourless liquid (483 g, 2.28 mol, 93%).
References
Marciniec, B., Gulinski, J., Urbaniac, W. & Kornetka Z. Comprehensive Handbook on Hydrosilylation (1992).
Marciniec, B. Hydrosilylation: A Comprehensive Review on Recent Advances (2009).
Troegel, D. & Stohrer, J. Recent advances and actual challenges in late transition metal catalyzed hydrosilylation of olefins from an industrial point of view. Coord. Chem. Rev. 255, 1440–1459 (2011).
Roy, A. K. A review of recent progress in catalyzed homogeneous hydrosilation (hydrosilylation). Adv. Organomet. Chem. 55, 1–59 (2007).
Nakajima, Y. & Shimada, S. Hydrosilylation reaction of olefins: recent advances and perspectives. RSC Adv. 5, 20603–20616 (2015).
Naganawa, Y., Inomata, K., Sato, K. & Nakajima, Y. Hydrosilylation reactions of functionalized alkenes. Tetrahedron Lett. 61, 151513 (2020).
Lewis, L. N., Stein, J., Gao, Y., Colborn, R. E. & Hutchins, G. Platinum catalysts used in the silicones industry: their synthesis and activity in hydrosilylation. Platinum Met. Rev. 41, 66–75 (1997).
Shit, S. C. & Shah, P. A review on silicone rubber. Natl. Acad. Sci. Lett. 36, 355–365 (2013).
Plueddemann, E. D. Silane Coupling Agents 2nd ed (1991).
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H. & Mai, C. Silane coupling agents used for natural fiber/polymer composites: a review. Compos. PART A Appl. Sci. Manuf. 41, 806–819 (2010).
Pape, P. G. in Applied Plastics Engineering Handbook: Processing and Materials (ed. Kutz, M.) 503–517 (2011).
Pape, P. G. in Applied Plastics Engineering Handbook: Processing, Materials, and Applications (ed. Kutz, M.) 555–572 (2017).
Deschler, U., Kleinschmit, P. & Panster, P. 3-Chloropropyltrialkoxysilanes-key intermediates for the commercial production of organofunctionalized silanes and polysiloxanes. Angew. Chem. Int. Ed. Engl. 25, 236–252 (1986).
Speier, J. L., Webster, J. A. & Barnes, G. H. The addition of silicon hydrides to olefinic double bonds. Part II. The use of group VIII metal catalysts. J. Am. Chem. Soc. 79, 974–979 (1957).
Karstedt, B. D. US 3775452A (1973).
Marciniec, B., Kornetka, Z. W. & Urbaniak, W. Platinum and rhodium complexes supported on aminated silica as hydrosilylation catalysts. J. Mol. Catal. 12, 221–230 (1981).
Hu, C.-Y., Han, X.-M., Jiang, Y.-Y., Liu, J.-G. & Shi, T.-Y. Hydrosilylation catalyzed by polysiloxane-bound platinum complexes. J. Macromol. Sci. Chem. 26, 349–360 (1989).
Chernyshev, E. A., Belyakova, Z. V., Knyazeva, L. K., Pomerantseva, M. G. & Efimova, L. A. The influence of additives to the Speier catalyst on hydrosilylation of functionalized alkenes. Russ. Chem. Bull. 47, 1374–1378 (1998).
Marciniec, B., Maciejewski, H., Duxzmal, W., Fiedorow, R. & Kityński, D. Kinetics and mechanism of the reaction of allyl chloride with trichlorosilane catalyzed by carbon-supported platinum. Appl. Organometal. Chem. 17, 127–134 (2003).
Belyakova, Z. V. et al. Hydrosilylation of cyclohexene and allyl chloride with trichloro-, dichloro(methyl)-, and chlorodimethylsilanes in the presence of Pt(0) complexes. Russ. Chem. Bull. 76, 925–930 (2006).
Hofmann, N. et al. Liquid-liquid biphasic, platinum-catalyzed hydrosilylation of allyl chloride with trichlorosilane using an ionic liquid catalyst phase in a continuous loop reactor. Adv. Synth. Catal. 350, 2599–2609 (2008).
Taccardi, N. et al. Catalyst recycling in monophasic Pt-catalyzed hydrosilylation reactions using ionic liquids. Appl. Catal. A Gen. 399, 69–74 (2011).
Gigler, P. et al. Mechanistic insights into the hydrosilylation of allyl compounds—evidence for different coexisting reaction pathways. J. Catal. 295, 1–14 (2012).
Riener, K., Meister, T. K., Gigler, P., Herrmann, W. A. & Kühn, F. E. Mechanistic insights into the iridium-catalyzed hydrosilylation of allyl compounds. J. Catal. 331, 203–209 (2015).
Chalk, A. J. & Harrod, J. F. Homogeneous catalysis. II. The mechanism of the hydrosilation of olefins catalyzed by group VIII metal complexes. J. Am. Chem. Soc. 87, 16–21 (1965).
Schroeder, M. A. & Wrighton, M. S. Pentacarbonyliron(0) photocatalized reactions of trialkylsilanes with alkenes. J. Organomet. Chem. 128, 345–358 (1977).
Peng, D. et al. Phosphinite-iminopyridine iron catalysts for chemoselective alkene hydrosilylation. J. Am. Chem. Soc. 135, 19154–19166 (2013).
Chem, C. et al. Rapid, regioconvergent, solvent-free alkene hydrosilylation of with a cobalt catalyst. J. Am. Chem. Soc. 137, 13244–13247 (2015).
Buslov, I., Becouse, J., Mazza, S., Montandon-Clerc, M. & Hu, X. Chemoselective alkene hydrosilylation catalyzed by nickel pincer complexes. Angew. Chem. Int. Ed. 54, 14523–14526 (2015).
Chemg, B., Lu, P., Zhang, H., Cheng, X. & Lu, Z. Highly enantioselective cobalt-catalyzed hydrosilylation of alkenes. J. Am. Chem. Soc. 139, 9439–9442 (2017).
Srinivas, V., Nakajima, Y., Ando, W., Sato, K. & Shimada, S. Alicylaldiminato)Ni(II)-catalysts for hydrosilylation of olefins. Catal. Sci. Technol. 5, 2081–2084 (2015).
Srinivas, V., Nakajima, Y., Ando, W., Sato, K. & Shimada, S. Bis(acetylacetonato)Ni(II)/NaBHEt3-catalyzed hydrosilylation of 1,3-dienes, alkenes and alkynes. J. Organomet. Chem. 809, 57–62 (2016).
Nakajima, Y., Sato, K. & Shimada, S. Development of nickel hydrosilylation catalysts. Chem. Rec. 16, 2379–2387 (2016).
Srinivas, V., Nakajima, Y., Sato, K. & Shimada, S. Iridium-catalyzed hydrosilylation of sulfur-containing olefins. Org. Lett. 20, 12–15 (2018).
Inomata, K., Naganawa, Y., Guo, H., Sato, K. & Nakajima, Y. Ruthenium-catalyzed selective hydrosilylation reaction of allyl-functionalized PEG derivatives. Tetrahedron Lett. 60, 151086 (2019).
Díez-González, S. & Nolan, S. P. Copper, silver, and gold complexes in hydrosilylation reactions. Acc. Chem. Res. 41, 349–358 (2008).
Du, X. & Huang, Z. Advances in base-metal-catalyzed alkene hydrosilylation. ACS Catal. 7, 1227–1243 (2017).
Hofmann, R. J., Vlatković, M. & Wiesbrock, F. Fifty years of hydrosilylation in polymer science: a review of current trends of low-cost transition-metal and metal-free catalysts, non-thermally triggered hydrosilylation reactions, and industrial applications. Polymers 9, 534 (2017).
Obligacion, J. V. & Chirik, P. J. Earth- abundant transition metal catalysts for alkene hydrosilylation and hydroboration. Nat. Rev. Chem. 2, 15–34 (2018).
Wang, Z., Matsumoto, K., Nakajima, Y., Shimada, S. & Sato, K. JP 201985352 A (2019).
Markó, I. E. et al. Selective and efficient platinum(0)-carbene complexes as hydrosilylation catalysts. Science 298, 204–206 (2002).
Igarashi, M. et al. Ir-catalyzed hydrosilylation reaction of allyl acetate with octakis(dimethylsiloxy)octasilsesquioxane and related hydrosilanes. J. Organomet. Chem. 752, 141–146 (2014).
Matsumoto, K., Nakajima, Y., Sato, K., & Shimada, S. WO 2017154846A (2017).
Xie, X. et al. Iridium-catalyzed hydrosilylation of unactivated alkenes: scope and application to late-stage functionalization. J. Org. Chem. 84, 1085–1093 (2019).
Chalk, A. J. The hydrosilylation of olefins catalyzed by some rhodium and cobalt complexes. J. Organomet. Chem. 21, 207–213 (1970).
Dickers, H. M., Naszeldine, R. N., Malkin, L. S., Mather, A. P. & Parich, R. V. (Dick) Organosilicon chemistry. Part 24. Homogeneous rhodium-catalised hydrosilation of alkenes and alkynes: the role of oxygen or hydroperoxides. J. Chem. Soc. Dalton Trans. 308–313 (1980).
Onopchenko, A., Sabourin, E. T. & Beach, D. L. Vinyl- and allylsilanes from the rhodium (I)-catalyzed hydrosilylation of 1-alkenes with trialkylsilanes. J. Org. Chem. 49, 3398–3392 (1984).
Ojima, I., Fuchikami, T. & Yatabe, M. The reactions of hydrosilanes with trifluoropropene and pentafluorostyrene catalyzed by ruthenium, rhodium and palladium complexes. J. Organomet. Chem. 260, 335–346 (1984).
Meißer, A. et al. New pentacoordinated rhodium species as unexpected products during the in situ-generation of dimeric diphosphine-rhodium neutral catalysts. Chem. Eur. J. 20, 14721–14728 (2014).
Meißer, A. et al. In situ synthesis of neutral dinuclear rhodium diphosphine complexes [{Rh(diphosphine)(μ2-X)}2]: systematic investigations. ChemPlusChem 80, 169–180 (2014).
King, S. A., Engen, D. V., Fischer, H. E. & Schwartz, J. Solid-state structure of the bis(allyl)rhodium choloride dimer. Organometallics 10, 1195–1197 (1991).
Hii, K. K., Perera, S. D. & Shaw, B. L. Terdentate (P-N-O) complexes formed from Z,E-PPh2CH2C-(But)=N-N=CH(C6H4OH-2) or Z,E-PPh2CH2C(But)=N-N=CH-[C6H2(OH-2)(OMe)2-4,6] and nickel, palladium, platinum, rhodium or iridium. J. Chem. Soc. Dalton Trans. 3589–3596 (1994).
Passarelli, V. & Benetollo, F. Reactivity of novel N,N’-diphosphino-silanediamine-based rhodium(I) derivatives. Inorg. Chem. 50, 9958–9967 (2011).
Marder, T. B., Norman, N. C., Rice, C. R. & Robins, E. G. Reaction between rhodium(III) bisboryls and diborane(4) compounds: evidence for a σ-bond metathesis process. Chem. Commun. 53–54 (1997).
Matsuda, T. & Yuihara, I. A rhodium(I)-catalysed formal intramolecular C-C/C-H bond metathesis. Chem. Commun. 51, 7393–7396 (2015).
Millan, A., Towns, E. & Maitlis, M. The direct conversion of α-olefins into vinyl- and allyl-silanes catalyzed by rhodium complexes. J. Chem. Soc. Chem. Commun. 673–674 (1981).
Onochenko, A., Sabourin, E. T. & Beach, D. L. Rhodium(I)-catalyzed hydrosilylation of stylene. J. Org. Chem. 48, 5101–5105 (1983).
Millan, A., Fernandez, M.-J., Bentz, P. & Maitlis, P. M. Rhodium-catalysed hydrosilylation: the direct production of alkenyl(triethyl)silanes from alk-1-enes and triethylsilane. J. Mol. Catal. 26, 89–104 (1984).
Onopchenko, A., Sabourin, E. T. & Beach, D. T. Vinyl- and allylsilanes from the rhodium(I)-catalyzed hydrosilylation of 1-alkenes with trialkylsilanes. J. Org. Chem. 49, 3389–3392 (1984).
Sakaki, S. et al. Why does the rhodium-catalyzed hydrosilylation of alkenes take place through a modified Chalk-Harrod mechanism? A theoretical study. Organometallics 21, 3788–3802 (2002).
Hua, Y., Nguyen, H. H., Trog, G., Berlin, A. S. & Jeon, J. Rhodium-catalyzed alkene hydrosilylation via a hydride shuttle process by diene ligands: dramatic enhancement of regio- and diastereoselectivity. Eur. J. Org. Chem. 27, 5890–5895 (2014).
Zhao, L., Nakatani, N., Sunada, Y., Nagashima, H. & Hasegawa, J. Theoretical study on the rhodium-catalyzed hydrosilylation of C=C and C=O double bonds with tertiary silane. J. Org. Chem. 84, 8552–8561 (2019).
Chem, Q., Lin, B.-L., Fu, Y., Liu, L. & Guo, Q.-X. Ligand effects on migratory insertion by the Heck reaction. Res. Chem. Intermed. 31, 759–767 (2005).
Korenaga, T., Sasaki, R., Takemoto, T., Yasuda, T. & Watanabe, M. Computationally-led ligand modification using interplay between theory and experiments: highly active chiral rhodium catalyst controlled by electronic effects and CH-π interactions. Adv. Synth. Catal. 360, 322–333 (2018).
Acknowledgements
This work was supported by the “Development of Innovative Catalytic Processes for Organosilicon Functional Materials” project (PL: K. Sato) from the New Energy and Industrial Technology Development Organization (NEDO).
Author information
Authors and Affiliations
Contributions
K.I. performed the experiments and wrote the manuscript. Y. Naganawa discussed the results and wrote the manuscript. Z.A.W. and K. Sakamoto performed some experiments. K.M. planned the initial experiments. K. Sato conceived, designed, and directed the research. Y. Nakajima designed, directed the research, and wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Inomata, K., Naganawa, Y., Wang, Z.A. et al. Selective hydrosilylation of allyl chloride with trichlorosilane. Commun Chem 4, 63 (2021). https://doi.org/10.1038/s42004-021-00502-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s42004-021-00502-5
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.