Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

On-chip intercalated-graphene inductors for next-generation radio frequency electronics


On-chip metal inductors that revolutionized radio frequency electronics in the 1990s suffer from an inherent limitation in their scalability in state-of-the-art radio frequency integrated circuits. This is because the inductance density values for conventional metal inductors, which result from magnetic inductance alone, are limited by the laws of electromagnetic induction. Here, we report inductors made of intercalated graphene that uniquely exploit the relatively large kinetic inductance and high conductivity of the material to achieve both small form-factors and high inductance values, a combination that has proved difficult to attain so far. Our two-turn spiral inductors based on bromine-intercalated multilayer graphene exhibit a 1.5-fold higher inductance density, leading to a one-third area reduction, compared to conventional inductors, while providing undiminished Q-factors of up to 12. This purely material-enabled technique provides an attractive solution to the longstanding scaling problem of on-chip inductors and opens an unconventional path for the development of ultra-compact wireless communication systems.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Fig. 1: Significance of kinetic inductance and concept of intercalated MLG on-chip inductors.
Fig. 2: Design of bromine-intercalated graphene inductors.
Fig. 3: Measured inductance and Q-factor versus frequency for intercalated MLG inductors in different layouts.
Fig. 4: Inductance and the corresponding inductance density versus maximum Q-factors of intercalated MLG and copper inductors.


  1. Evans, D. The Internet of Things - how the next evolution of the internet is changing everything. CISCO White Papers 1–11 (2011).

  2. Nordrum, A. Popular Internet of Things forecast of 50 billion devices by 2020 is outdated. IEEE Spectrum (2016).

  3. Manyika, J. et al. Disruptive technologies: Advances that will transform life, business, and the global economy (McKinsey Insights And Publications, 2013).

  4. Das, R. RFID Forecasts, Players and Opportunities 2016-2026.

  5. Lopez-Villegas, J. M., Samitier, J., Cane, C., Losantos, P. & Bausells, J. Improvement of the quality factor of RF integrated inductors by layout optimization. IEEE Trans. Microw. Theory Tech. 48, 76–83 (2000).

    Article  Google Scholar 

  6. Yoon, J.-B., Choi, Y.-S., Kim, B.-I., Eo, Y. & Yoon, E. CMOS-compatible surface-micromachined suspended-spiral inductors for multi-GHz silicon RF ICs. IEEE Electron Device Lett. 23, 591–593 (2002).

    Article  Google Scholar 

  7. Jiang, H., Wang, Y., Yeh, J.-L. A. & Tien, N. C. On-chip spiral inductors suspended over deep copper-lined cavities. IEEE Trans. Microw. Theory Tech. 48, 2415–2423 (2000).

    Article  Google Scholar 

  8. Yu, X. et al. Ultra-small, high-frequency, and substrate-immune microtube inductors transformed from 2D to 3D. Sci. Rep. 5, 9661 (2015).

    Article  Google Scholar 

  9. Yin, W.-Y. et al. Vertical topologies of miniature multispiral stacked inductors. IEEE Trans. Microw. Theory Tech. 56, 475–486 (2008).

    Article  Google Scholar 

  10. Tang, C.-C., Wu, C.-H. & Liu, S.-I. Miniature 3-D inductors in standard CMOS process. IEEE J. Solid-State Circuits 37, 471–480 (2002).

    Article  Google Scholar 

  11. Ahn, C. H. & Allen, M. G. Micromachined planar inductors on silicon wafers for MEMS applications. IEEE Trans. Ind. Electron. 45, 866–876 (1998).

    Article  Google Scholar 

  12. Ikeda, K. et al. Thin-film inductor for gigahertz band with CoFeSiO-SiO2 multilayer granular films and its application for power amplifier module. IEEE Trans. Magn. 39, 3057–3061 (2003).

    Article  Google Scholar 

  13. Li, H. & Banerjee, K. High-frequency effects in carbon nanotube interconnects and implications for on-chip inductor design. In 2008 IEEE International Electron Devices Meeting 1–4 (IEEE, 2008).

  14. Li, H. & Banerjee, K. High-frequency analysis of carbon nanotube interconnects and implications for on-chip inductor design. IEEE Trans. Electron Devices 56, 2202–2214 (2009).

    Article  Google Scholar 

  15. Sarkar, D., Xu, C., Li, H. & Banerjee, K. High-frequency behavior of graphene-based interconnects - Part II: impedance analysis and implications for inductor design. IEEE Trans. Electron Devices 58, 853–859 (2011).

    Article  Google Scholar 

  16. Li, H., Xu, C., Srivastava, N. & Banerjee, K. Carbon nanomaterials for next-generation interconnects and passives: physics, status, and prospects. IEEE Trans. Electron Devices 56, 1799–1821 (2009).

    Article  Google Scholar 

  17. Li, X. et al. Graphene inductors for high-frequency applications - design, fabrication, characterization, and study of skin effect. In IEEE International Electron Devices Meeting 5.4.1-5.4.4 (IEEE, 2014).

  18. Jiang, J. et al. Intercalation doped multilayer-graphene-nanoribbons for next-generation interconnects. Nano Lett. 17, 1482–1488 (2017).

    Article  Google Scholar 

  19. Dresselhaus, M. S. & Dresselhaus, G. Intercalation compounds of graphite. Adv. Phys. 51, 1–186 (2002).

    Article  Google Scholar 

  20. Enoki, T., Suzuki, M. & Endo, M. Graphite Intercalation Compounds and Applications. (Oxford University Press, NY, 2003).

  21. Liu, W., Kang, J. & Banerjee, K. Characterization of FeCl3 intercalation doped CVD few-layer graphene. IEEE Electron Device Lett. 37, 1246–1249 (2016).

    Article  Google Scholar 

  22. Plombon, J. J., O’Brien, K. P., Gstrein, F., Dubin, V. M. & Jiao, Y. High-frequency electrical properties of individual and bundled carbon nanotubes. Appl. Phys. Lett. 90, 63106 (2007).

    Article  Google Scholar 

  23. Lee, T. H. The Design of CMOS Radio-Frequency Integrated Circuits. (Cambridge University Press, Cambridge, 2004).

    Google Scholar 

  24. Tongay, S. et al. Supermetallic conductivity in bromine-intercalated graphite. Phys. Rev. B 81, 115428 (2010).

    Article  Google Scholar 

  25. Jiang, J., Kang, J. & Banerjee, K. Characterization of self-heating and current-carrying capacity of intercalation doped graphene-nanoribbon interconnects. In IEEE International Reliability Physics Symposium 6B.1.1–6B.1.6 (2017).

  26. Xu, C., Li, H. & Banerjee, K. Modeling, analysis, and design of graphene nano-ribbon interconnects. IEEE Trans. Electron Devices 56, 1567–1578 (2009).

    Article  Google Scholar 

  27. Steinhögl, W., Schindler, G., Steinlesberger, G., Traving, M. & Engelhardt, M. Comprehensive study of the resistivity of copper wires with lateral dimensions of 100 nm and smaller. J. Appl. Phys. 97, 23706 (2005).

    Article  Google Scholar 

  28. Ueno, K. et al. Bromine doping of multilayer graphene for low-resistance interconnects. Jpn. J. Appl. Phys. 53, 05GC02 (2014).

Download references


This work was supported in part by the UC Lab Fees Research Program (grant LFR-17-477237), the UC MRPI (MRP-17-454999), the Systems on Nanoscale Information fabriCs (SONIC), one of the six SRC STARnet Centres, sponsored by MARCO and DARPA, as well as by the Air Force Office of Scientific Research, Arlington, VA, USA (grant FA9550-14-1-0268). X.L. and J.M. were supported by the National Natural Science Foundation of China (grant 61331004). Y.M., K.K., M.K. and K.U. received support from the SIT Research Centre for Green Innovation, Japan. The authors would like to thank W. Cao, A. Pal of the Nanoelectronics Research Lab ( at University of California, Santa Barbara (UCSB), M. Guidry at UCSB and C. Xu at Maxim Integrated for useful technical discussions.

Author information

Authors and Affiliations



K.B. conceived the idea and led the research. J.K., X.L. and J.J. performed the modelling and simulations guided by K.B. and J.M. J.K., X.L. and X.X. designed the inductor layouts. J.J., Y.M., K.K., M.K. and K.U. performed the doping process. J.H.C., K.K., M.K. and K.U. performed the Raman, XPS, ultraviolet photoelectron spectroscopy, EDX, STEM and Hall measurements. X.X. and J.J. performed the AFM measurements. J.K., J.J., X.X. and W.L. fabricated the devices and performed electrical measurements. X.L. and J.K. analysed the data. J.K. and K.B. wrote the main paper and the Supplementary Information Sections with input from all other authors.

Corresponding author

Correspondence to Kaustav Banerjee.

Ethics declarations

Competing Interest

The authors declare no competing financial interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Sections 1–15.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Kang, J., Matsumoto, Y., Li, X. et al. On-chip intercalated-graphene inductors for next-generation radio frequency electronics. Nat Electron 1, 46–51 (2018).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing