Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Vulnerability indicators for natural hazards: an innovative selection and weighting approach


To prepare for upcoming extreme events, decision makers, scientists and other stakeholders require a thorough understanding of the vulnerability of the built environment to natural hazards. A vulnerability index based on building characteristics (indicators) rather than empirical data may be an alternative approach to a comprehensive physical vulnerability assessment of the building stock. The present paper focuses on the making of such an index for dynamic flooding in mountain areas demonstrating the transferability of vulnerability assessment approaches between hazard types, reducing the amount of required data and offering a tool that can be used in areas were empirical data are not available. We use data from systematically documented torrential events in the European Alps to select and weight the important indicators using an all-relevant feature selection algorithm based on random forests. The permutation-based feature selection reduced the initial number of indicators from 22 to seven, decreasing in this way the amount of required data for assessing physical vulnerability and ensuring that only relevant indicators are considered. The new Physical Vulnerability Index (PVI) may be used in the mountain areas of Europe and beyond where only few empirical data are available supporting decision-making in reducing risk to dynamic flooding.


Mountain areas are sensitive to climate change, experience significant socio-economic dynamics, have insufficient space for settlement and often face challenges related to limited communication networks due to their remoteness. In these areas, where actually 12% of the world’s population live1, natural hazards, such as dynamic flooding, are capable of causing significant suffering and disruption to local communities. Dynamic flooding is characterized by high flow rate and high sediment concentration. It occurs in mountain rivers and torrents and includes processes such as fluvial sediment transport, debris flow and related phenomena that repeatedly cause damages to the built environment in mountain areas globally.

Understanding, analysing, quantifying and visualizing vulnerabilities enable authorities, decision makers and other stakeholders managing and reducing existing and emerging risks. Vulnerability is an essential component of risk analysis and, as such, it has to be deeply investigated. The most common approach of assessing physical vulnerability to dynamic flooding is the computation of vulnerability curves2,3. However, these curves are associated with a large number of uncertainties deriving from the fact that the constructive and design characteristics of buildings are often not considered and, instead, empirical relationships between hazard magnitude and observed loss heights are used2. An alternative approach could involve the development of a vulnerability index for each building based on a number of indicators (building characteristics and properties). Indicator-based methods are often used for the assessment of social (e.g. SoVI4) and eco-environmental vulnerability5,6,7. In limited cases and for hazards other than flooding, physical vulnerability of the built environment has already been successfully approached using indicators. Such an approach is the PTVA (Papathoma Tsunami Vulnerability Assessment), originally proposed for assessing the effects of tsunami hazards. The PTVA has been introduced in 20038 and has been further developed and improved since then9. In the present paper a modified version of this method will be used to prove its application for dynamic flooding in mountain areas.

Usually, adequate vulnerability approaches are developed for each hazard type. Methods suitable for one hazard type are rarely modified and used for another one limiting possible synergies between research groups from different disciplines. Although the use of indicators is common for more hazard types there are significant differences concerning the selection and scoring of indicators, scale, unit of study (building, building block, administrative area) and weighting method. For this reason, the transfer of methods from one natural process to the other is not common practice. Moreover, due to the different impact that processes have on the elements at risk a whole new set of indicators have to be collected for each hazard type even if the framework remains the same. Differences are evident also in the scale and unit of research used in different studies. For example, studies focusing on environmental vulnerability (e.g.5,6,7) are often conducted in a regional scale and use as unit of research larger areas based on land-cover and land use types, whereas in the case of physical vulnerability to earthquakes (e.g.10) and floods (e.g.11) the unit may be the building, the building block or the administrative area depending on the aim of the study. In a cross-disciplinary study for flood and earthquake vulnerability approaches, Ruiter et al.12 suggest that differences between the two disciplines mainly focus on the scale, vulnerability dimension (social, physical etc.), individual focus (e.g. local economic sector vs. social factors) and existence of temporal components. We attempt herein the transfer of a method used for tsunami to dynamic flooding without making significant changes to it based on the similarities of the two processes.

Occasionally natural processes share similar properties. For example, even if tsunami hazards and dynamic flooding have many differences, as far as the impact on buildings is concerned, they do share some common characteristics. Damage in both cases is related to hydrostatic and hydrodynamic forces as well as buoyancy and uplift forces, debris impact, debris damming, and additional gravity loads from retained water and material on floors above the ground level13. Nevertheless, there are also many differences including the type of debris (during the tsunami waterborne debris such as large boats or shipping containers may cause major damage or debris damming). Furthermore, tsunamis contain sediment that does not exceed 10% by volume13, whereas during dynamic flooding sediment concentration may exceed 50%14. Moreover, in the case of tsunamis additional damage may occur due to the “bore impact” (a broken wave that propagates over still water)15 which is not the case for dynamic flooding in mountain catchments. Finally, tsunamis affect large and flat coastal areas, whereas flooding in mountain areas often impact small settlements located on steep slopes or within small catchments. For both types of hazards empirically-derived vulnerability curves have been used to show the relationship between magnitude and the observed degree of loss16,17. However, a comparison of these empirical curves is impossible due to the outlined differences in hazard characteristics. Therefore, we test transferability of methods for damage assessment by modifying the PTVA that used indicators to assess the vulnerability of buildings exposed to tsunami impact, and approach the issue of vulnerability for dynamic flooding in mountain catchments.

Birkmann18 and Fuchs et al.19 define indicators as variables that are “an operational representation of a characteristic or quality of a system”. According to OECD20, the weighting and the aggregation of indicators to indices may have a large impact on the resulting rankings21 and, consequently, on decision making22. In the literature, there are many available methods both for weighting and aggregating indicators to indices. According to Gan et al.23 and Fuchs et al.19 the choice of the weighting and aggregation method is related to the objective of the study and the spatial and temporal scales used. The use of indicators has many advantages compared to traditional empirical loss assessment, including the fact that complex issues are summarized supporting decision making and communication among stakeholders is facilitated24.

Indicator-based methods for physical vulnerability assessment are limited, however, the number of studies using this method is growing rapidly. As far as mountain hazards in torrential catchments are concerned, one of the first attempts in this direction was made by Papathoma-Köhle et al.25. An inventory of exposed buildings and their characteristics relevant to their susceptibility to landslides including debris flow was generated. The building characteristics (indicators) were weighted according to their contribution to the overall building vulnerability using expert judgement. An improved version of the method had been provided by Kappes et al.26 and applied in France in a multi-hazard environment. It has been recognized that the most significant drawback of the method is that process intensities were not considered in the index calculation. Silva and Pereira27 partly closed this gap by combining the resistance of the building with the magnitude of the process (in this case shallow landslides), an approach that was also chosen by Mazzorana et al.28 and Milanesi et al.29, including information such as the construction technique and material, the floor and roof structure, and the number of floors.

Thouret et al.30 as well as Ettinger et al.31 used indicators to assess the physical vulnerability of the built environment to debris flow in the Andes. Based on the analysis of high-resolution satellite imagery, Thouret et al.30 presented an index based on indicators such as building type, number of floors, percentage and quality of building openings and roof type for a large dataset. Using the same data together with ground truth observation, Ettinger et al.31 reported vulnerability indices based on indicators such as number of stories, building footprint, shape of city block and building density as well as distance from channel, distance from bridge and impermeability of the soil. Finally, Thennavan et al.32 based on the method of Papathoma-Köhle et al.25 presented physical vulnerability indices for buildings in India.

The construction of indices requires a number of steps such as indicators selection, weighting and aggregation. In general, indicators selection in the literature has been based until now on arbitrary expert judgement. As far as weighting is concerned, according to Beccari33, who reviewed 106 studies on index construction for natural hazard risk assessment, most of the studies were based on equal weighting (44 studies), which means that each individual indicator has the same impact on the final result, followed by weighting based on statistical methods (28 studies), weighting based on participatory methods (19 studies) and weighting based on different – and thus more subjective – approaches by the respective authors (13 studies).

In this paper, a new indicator-based approach based on the PTVA method34 is presented based only on relevant data. The method is applied in the European Alps for buildings subject to dynamic flooding. The advantage of the method in comparison to already existing studies is the advanced selection and weighting of the indicators and their predictive power. Thus, the method can be used in regions that have never experienced the impact of dynamic flooding so far, and due to its easy applicability and flexibility, the method may also be used by a wide range of professionals such as practitioners, decision makers, or even by homeowners.

The innovative aspects of the presented approach are outlined as follows:

  1. 1.

    An existing approach, PTVA, is adapted for a different hazard type (dynamic flooding) in mountain areas, giving deeper insights into the interaction between building envelope and hazard dynamics.

  2. 2.

    An all-relevant feature selection entails that only relevant indicators are considered in the construction of the new index, thereby significantly reducing the required amount of data.

  3. 3.

    The indicator weighting is based on indicator importance of real-world damage data from recent events.

  4. 4.

    Results of laboratory experiments are used to support the selection of and relevance between indicators.

  5. 5.

    Given enough data, the method is robust since it is based on an ensemble of tree-based models.

  6. 6.

    A Physical Vulnerability Index (PVI) for dynamic flooding is computed which can be used for a variety of processes without distinguishing between different torrential hazards (flash flood, hyper-concentrated flow, fluvial sediment transport, debris flow).

  7. 7.

    The method is easily transferable to other locations and highly flexible since it can be adapted to local conditions.

  8. 8.

    The PVI can be used in areas without historic record of events and in absence of empirical data to quantify the vulnerability of buildings.

  9. 9.

    The PVI can be used from different end-users including homeowners, local authorities, insurance companies and emergency services.

The aim of this paper is to describe the adaptation of a method that has originally been established for assessing physical vulnerability for one hazard type to another hazard type occurring in a completely different environment. Specifically, the procedure and making of a new PVI for torrential hazards based on the PTVA method is described (Fig. 1). The paper focuses on the process of indicator selection and weighting based on the importance of building characteristics being tested using real-world damage data. The index constitutes a valuable tool for decision makers since they can have an overview of the vulnerability of buildings at local level. On this basis, they can make decisions regarding evacuation planning, local adaptation measures, larger structural protection measures and necessary reinforcement of buildings. Advantages and limitations of the method as well as possible future improvements are discussed.

Figure 1
figure 1

Methodological flow and aim of the study.

The selection and weighting of the indicators index is based on data from four different case studies in the Austrian and the Italian Alps, respectively (Table 1). In most areas the torrential processes were described as fluvial sediment transport and only in a few areas the process was identified as a debris flow. The PVI was individually calculated for all four case studies.

Table 1 Characteristics of the 2005 event in the Austrian case study areas42,43,44,45 and the 1987 event in the Italian case study46,47.


The making of the PVI

A preliminary list of indicators (Table 2) was derived based on previous indices (PTVA), expert judgement, literature review and study of damage documentation of past events. Some of the indicators are similar to the ones used in PTVA, however, many additional indicators have been identified that have been considered relevant to the impact of torrential hazards to buildings. The relevance of some of the indicators was additionally confirmed through laboratory experiments35,36:

Table 2 Summary table of raw data characteristics.

In more detail, one of the case studies that are referred to herein (Schannerbach, Pettneu am Arlberg, Austria), was used as a case study. The catchment was replicated in the laboratory in a scale 1:30. Three of the buildings that were damaged during the 2005 event were equipped with sensors to record the impact pressure on each wall. The event of 2005 was simulated in the laboratory and was repeated under 4 scenarios: (i) with buildings surrounding the three buildings under investigation, (ii) without surrounding buildings, (iii) with openings (windows and doors) and (iv) without openings (plain walls). The results clearly showed that the distance from the torrent channel, the existence of surrounding buildings, the height of the debris and the existence of openings may affect the impact pressure on the walls in different ways35,36. The scoring of the indicators is described in detail in the method chapter below.

Selection and weighting of vulnerability indicators

For each case study indicators were collected for the buildings that experienced damage during the considered events. Some of the indicators were collected during field work, some others were available from the authorities and some were interpreted from photographs.

In more detail, indicators were collected for a total of 163 buildings. Details are provided in Table 2. For each of these buildings the degree of loss (the ratio between the reconstruction value of the building and the monetary loss) following specific events was known. Each building was assigned with a score for each indicator as described in detail in the method section. The feature importance of each indicator on the degree of loss for each building was obtained using the random-forest based all-relevant feature selection algorithm Boruta37. The Boruta selection revealed two important pieces of information: (a) the relevant indicators that may be used in the making of the PVI and (b) the relative importance of these indicators in the physical vulnerability of the buildings (Fig. 2). According to the Boruta feature selection, a large number (15) of the indicators were rejected whereas only seven indicators perform better than their shuffled duplicates (shadow features) in explaining the degree of loss (Table 3). Consequently, the 15 rejected indicators cannot be used for the calculation of the PVI.

Figure 2
figure 2

Attribute importance of confirmed and rejected indicators based on Boruta feature selection.

Table 3 Indicators to be considered in the index and their weights.

Weights were subsequently calculated for the selected indicators as the relative contribution of each relevant feature to the total importance of all relevant features by dividing the respective features’ median importance by the sum of median importances for all relevant features, resulting in the weightings shown in Table 3.

Based on these results, the PVI equation has been finalized and is provided in the methods chapter (Eq. 5). Based on this equation, the PVI for each building was calculated in the four case study areas and the spatial pattern of physical vulnerability is shown in Figs 3, 4, 5 and 6. ArcGIS 10.2 and QGIS 3.8 were used for the creation of the maps.

Figure 3
figure 3

PVI for Schannerbach (municipality of Pettneu am Arlberg, Austria). Source background map: Geodata Web Services [], Land Tirol 2019, last access: 04.09.2019, license CC-BY 4.0.

Figure 4
figure 4

PVI for Stubenbach (municipality of Pfunds, Austria). Source background map: Geodata Web Services [], Land Tirol 2019, last access: 04.09.2019, license CC-BY 4.0.

Figure 5
figure 5

PVI for Fimberbach (municipality of Ischgl, Austria). Source background map: Geodata Web Services [], Land Tirol 2019, last access: 04.09.2019, license CC-BY 4.0.

Figure 6
figure 6

PVI for Plimabach (municipality of Martell, Italy). Source background map: Geodata Web Services [], Autonomous Province Bolzano-South Tyrol 2019, last access: 04.09.2019, license CC-BY 4.0.

The results of the physical vulnerability assessment can be cartographically displayed by using GIS. A database including all the relevant indicators may have multiple uses and allows regular updating. By visualizing vulnerability assessment results, a question that arises is related to the classification method used. The classification method used in Figs 36 for map generation was based on equal intervals, meaning that the difference between the high and the low values of each class is the same. The spatial pattern of the PVI shows that the buildings with very high PVI are located very close to the hazard source, however, buildings with medium or low PVI do not have a specific pattern. A discussion about the available classification methods and an interpretation of the results, as well as an interpretation of the maps and their potential application follows in the discussion chapter.

Discussion and Conclusions

This paper describes the making of a new Physical Vulnerability Index (PVI) for buildings exposed to dynamic flooding in mountain areas and its application in four case studies in the European Alps. The making of the index required the statistical analysis of the correlation between different building characteristics (vulnerability indicators) and the degree of loss following past disastrous events. As far as the reliability of the index is concerned, in Fig. 7 it is shown that for the four case studies the PVI is in accordance with the real degree of loss. In detail, the PVI is higher for buildings that experienced a high degree of loss and lower for buildings that faced milder losses.

Figure 7
figure 7

The PVI for each building and the resulting degree of loss in the four case studies from the European Alps.

The Boruta feature selection showed which indicators are relevant and should therefore be included in the PVI. Even if some indicators have often been reported as relevant in the literature, they were not able to explain the degree of loss in the specific dataset. Therefore, with a different data set based on buildings that show a higher variation in some characteristics the results would probably be different. For this reason, it is recommended that the non-relevant indicators should be collected in more case study areas and used in the future to validate the present results. It is possible that with a larger dataset the results of the Boruta selection are different and more indicators may be considered relevant.

The variation of the different indicators for the present dataset is shown in Fig. 8. It can be concluded that indicators such as the number of floors, the existence of a natural surrounding barrier, and the existence of a basement may have been excluded because in the specific case study most of the buildings had the same scoring for these indicators. Consequently, these indicators do not contain enough discriminatory information. On the other hand, indicators such as the level of the maintenance, the existence of basement openings and the wall thickness were unable to explain the degree of loss although their scoring varies considerably within the dataset. This leads to the conclusion that although the use of indices is seemingly not dependent on empirical data, empirical data are necessary for the weighting of indicators in the first place. Thus, the resulting equation for the calculation of the relative vulnerability index at the moment is still case study specific. However, by including more data from different locations, the weighting will change and a universal, robust index may be developed that can be used in any area where no event record is available. At the local level, however, the index can still show the relative vulnerability of buildings even if indicators such as the existence of basement are not included in the calculation.

Figure 8
figure 8

The share of the most frequent factor level for the set of indicators used (for the abbreviation of the indicators see Table 2).

The spatial pattern of the new PVI in Figs 36 shows the buildings with the highest PVI in red colour. Based on this map building owners can consider the adoption of local adaptation measures such as sealing of basement windows, building of surrounding wall which will change the scoring of the indicators and reduce the vulnerability index. Local adaptation measures are low-cost and efficient measures that can keep water and material outside of the building reducing in this way structural damage, damage of the content and threat to life. It is obvious from the maps that the PVI depends on many factors other than the location of the building. The distribution of PVI is not related only to the distance between the building and the torrent. It is noteworthy that the vast majority of the buildings in the municipalities of Pettneu am Arlberg, Pfunds and Martell are residential (Figs 3, 4 and 6). On the contrary, the vast majority of the buildings in Ischgl (Fig. 5) are hotels with a very high density of population mainly in winter but also in summer months. The overlay of the vulnerability map with information regarding the density of the population or the location of vulnerable groups (children, elderly) could be used by emergency services as a basis for planning their response to a crisis. The vulnerability maps may be used by local emergency services by locating vulnerable groups living in buildings with high PVI without delay following the event. In case of clusters of buildings with high PVI (which is not the case in our maps), local authorities could consider the construction of structural measures to protect this cluster of buildings.

The resulting vulnerability maps and the corresponding decisions for disaster management are very much dependent on the classification method of the vulnerability categories38. In Figs 36 the “equal interval” classification scheme is used. The “equal interval” method is based on the principle that every class has the same difference between the lower and the higher value. In this way, the presented information is easy to interpret and to be comprehended by a non-technical audience. A different classification scheme, however, such as the “quantile” mode (each class contains an equal number of features) is better for setting priorities, e.g. the top 10% of vulnerable buildings will be retrofitted. The “standard deviation” scheme (classes based on how much a feature’s attribute varies from the mean), on the other hand, may be used in case PVI values over a certain level may be considered unacceptable by the authorities. However, by using the “standard deviation scheme” one must consider that the PVI is an abstract relative value and the average value will be skewed by the very low vulnerability values.

The present paper demonstrated the stepwise development of an index to assess the physical vulnerability of buildings to dynamic flooding (including hyper-concentrated flow, debris flow, etc.). However, it is important to stress that the presented research and results were subject to a number of assumptions and limitations: (a) the data were collected mainly in the field. Limited visibility due to vegetation or difficulty to assign buildings in a specific category is one of the main sources of uncertainty; (b) the degree of loss is the ratio between the monetary damage and the reconstruction value of the building. The degree of loss may seem low if the building for any reason (e.g. many floors) has a very high reconstruction value; (c) the intensity of the process has been often identified from photos that were not always of an excellent quality.

Finally, the main outcomes of the study may be outlined as follows:

  • It is possible to transfer methods for vulnerability assessment from one hazard type to another.

  • The relevant features (indicators) required for such an assessment are less than it has been initially suggested.

  • Indicator-based methods are simple methods that may support decision-making regarding disaster risk reduction in anticipation of change.

  • An element at risk database containing indicators regarding the physical vulnerability of buildings to multiple hazards may be a valuable tool in the hands of local authorities, emergency planners, engineers, scientists and insurance companies.

  • The method can be transferred to areas with similar architecture without newly adapting the weights even if no record of respective dynamic flooding is available. In the future, using additional data from case studies with different building types and architecture the PVI can become generic and be used anywhere in the world.

    The present paper opens the way for future research including the following:

  • The method can be used in order to assess the BBB (Build Back Better) of settlements affected by natural hazards. The PVI index can be assigned to each building using data before and after the event provided that the data are available.

  • More research has to be done to enable access to more and better quality data. Innovative methods for data collection as well as post-event documentation are required.

  • Data from future events have to be collected continuously to improve the statistical analysis of the indicators and eventually the weighting. Additional data may show that more indicators are relevant and have to be used for the calculation of the PVI. For this reason, it is recommended that detailed sets of indicators including relevant and non-relevant indicators are collected.

  • The use of additional resilience indicators has to be considered. Damaged buildings lose their functionality due to a number of characteristics including the type of floor, the location of vital equipment related to the electricity network, the heating or the water supply, etc. This information should be also included in an inventory database of elements at risk.

  • The index may be expanded to include vulnerability indicators for more hazard types enabling in this way a multi hazard approach to physical vulnerability.

Finally, the physical vulnerability of buildings should be analysed and assessed in a wider framework of vulnerability and should be seen in an institutional context and in combination with socio-economic data.


The construction of the PVI is based on the recommendations of the Handbook on Constructing Composite Indicators20.

Theoretical framework

The theoretical framework should define the concept, the indicators and the selection criteria20. Herein, the theoretical framework should include a definition of vulnerability. The UNISDR39 definition of vulnerability is used and the method is adjusted to it. Thus, vulnerability comprises “the conditions determined by physical, social, economic and environmental factors or processes which increase the susceptibility of an individual, a community, assets or systems to the impacts of hazards”.

Selection of variables

The approach presented here is based on the PTVA, a method for vulnerability assessment originally developed for tsunami hazards. Given the differences between the two processes (tsunami and torrential hazards) the collection of additional indicators is considered essential. The indicators considered are shown in Table 2.

Scoring and normalization of data

Categorical, numeric and binary raw data were collected. Each indicator was given a score which allows the comparison with the other indicators (normalization). The scores are based on the PTVA method34. The Relative Vulnerability Index (RVI) developed in PTVA34 is given by the following equation:


where WV is the vulnerability to water intrusion (number of inundated levels/number of all levels), and SV is the Structural Vulnerability which is the product of Building Vulnerability (BV), Protection (Prot) and Exposure (Ex):

$$SV=BV\times Ex\times {\Pr }ot$$

Dall’Osso et al.34 assume that the overall Relative Vulnerability Index (RVI) is equal to 2/3 of the SV and 1/3 of the WV. We consider this assumption arbitrary. Therefore, we use WV and Ex as any other indicators and we test their relevance using statistical methods.

Each indicator related to the Bv (Table 4) and to Prot (Table 5) was given a score ranging from 1 to 5 according to whether and to which degree the specific characteristic contributes to a decrease or an increase of the overall physical vulnerability of the building respectively. The Ex is given by the depth of water expected at the building location. The scoring of the indicators related to the WV and the Ex are shown in Table 6.

Table 4 The scoring of indicators related to the Building Vulnerability (Bv).
Table 5 The scoring of indicators related to the protection (Prot).
Table 6 The scoring of indicators related to the vulnerability to water intrusion (WV) and Exposure (Ex).

Weighting and aggregation

The different versions of the PTVA used expert judgement, AHP and questionnaires to define the weight of the indicators. Herein, we perform a different weighting based on the feature importance of each indicator with the actual degree of loss during past events (Table 3).

Determining weights for available input variables is one of the most important aspects of calculating a vulnerability index due to potentially large effects of different feature weights on the outcome. From a statistical point of view this is closely related to the aspect of feature selection in model construction. Given data sparsity in a high-dimensional feature space, removing redundant or irrelevant variables is an important step towards reducing input data dimension and consequently increasing model performance. Essentially, variable selection is characterized by a trade-off between bias and variance: with increasing model complexity, bias decreases while variance increases, eventually leading to overfitting and poor model generalization performance40.

Classical machine learning approaches are often targeted towards obtaining the best predictive models given available training data. Therefore, their focus is on finding a minimal number of features that is optimal for classification, thereby solving the so-called minimal-optimal problem. While this may result in best possible predictive performance, any model constructed using a minimal-optimal strategy is merely a black box. This poses some restrictions on interpretability, because minimal-optimal attributes are typically determined by technical factors (i.e. a favourable signal-to-noise ratio) rather than causal relationships between independent features and the dependent variable. However, if the focus is on inference instead of prediction, one is usually primarily interested in understanding the underlying mechanisms linking predictors to the subject of interest, thus, requiring information on all attributes that are somewhat causally related to the target variable. This emphasis on causal significance between the selected feature set and the target variable leads to the all-relevant problem. An excellent description and discussion of these two concepts is provided by Nilsson et al.41.

In the present case, we are interested in identifying all attributes that are – at least in some circumstances – relevant for determining the degree of loss. Therefore, our feature set is obtained by employing Boruta, an all-relevant feature selection algorithm based on random forests37. Essentially, Boruta is a permutation-based testing strategy that relies on comparing the relevance of each single feature to randomly shuffled copies of all variables (“shadow attributes”). By conducting two-sided tests of equality on the Z score (i.e. the standardized and normalized accuracy loss) between each attribute and the best performing shadow attribute, all features are iteratively flagged as important (i.e. significantly more important than the shadow attributes) or unimportant (i.e. significantly less important than the shadow attributes).

In order to obtain optimal results, random forest hyperparameter tuning was performed prior to using Boruta to define (i) the number of variables to possibly split at in each node, (ii) the minimum node size as well as (iii) the number of trees, using an exhaustive grid search with cross-validation. The resulting Boruta feature selection revealed seven relevant features (Fig. 2).

The equation used for the calculation of the relative vulnerability index used in the present paper is the following:

$$PVI={w}_{1}\times WV+{w}_{2}\times Ex+{\sum }_{b=1}^{m}({w}_{b+2}{I}_{b}^{BV})+{\sum }_{p=1}^{n}({w}_{p+m+2}{I}_{p}^{Prot})$$

where PVI indicates the Physical Vulnerability Index, WV is the vulnerability to water intrusion, Ex is the exposure, I denotes the indicators used for building vulnerability (superscript BV) and protection (superscript Prot), m and n denote the number of relevant indicators for BV and Prot respectively, and w is the weight of each indicator. Weightings (wi) are calculated as relative contribution of each relevant feature to the total importance of all j relevant features by dividing the respective features’ median importance (\({\tilde{f}}_{i}\)) by the sum of median importances for all relevant features:

$${w}_{i}=\frac{{\tilde{f}}_{i}}{{\sum }_{j=1}^{N}\,{\tilde{f}}_{i}}$$

Based on the resulting weighting (Table 3) the final equation used for each building is:

$${\rm{PVI}}=(WV\times 0.23)+(Ex\times 0.28)+({{\rm{H}}}_{{\rm{OP}}}\times 0.20)+({{\rm{SUR}}}_{{\rm{Wh}}}\times 0.12)+({{\rm{SUR}}}_{{\rm{Wm}}}\times 0.07)+({\rm{ROW}}\times 0.06)+({\rm{ORI}}\times 0.04)$$

where WV: the vulnerability to water intrusion, Ex: the exposure, HOP: the height of windows, SURWh: the height of the surrounding walls, SURWm: the material of the surrounding walls, ROW: the building row towards the torrent and ORI: the orientation of the building.

The PVI index and classification

The choice of the classification method is closely related to the aim of the vulnerability assessment (e.g. priority settings, reinforcement priority or funding allocation, support for decision making) and it can be misleading. The most commonly used classification methods in GIS are natural breaks (Jenks), equal interval, quantile (equal counts) and standard deviation. The choice of the classification method is related to the use of the vulnerability map.

Presentation and dissemination

In general, indicators and indices may be visualized in tables, bar or line charts or trend diagrams20. However, due to the geographical nature of the PVI, and the need to communicate the information to a large number of stakeholders (e.g. local authorities, emergency services and the public) the use of geographical information systems is the most appropriate way of representation.

Data availability

The dataset generated and analysed in the present study may become available upon request.


  1. FAO. Why invest in sustainable mountain development? (Rome 2011).

  2. Papathoma-Köhle, M., Gems, B., Sturm, M. & Fuchs, S. Matrices, curves and indicators: A review of approaches to assess physical vulnerability to debris flows. Earth Science Reviews 171, 272–288, (2017).

    ADS  Article  Google Scholar 

  3. Fuchs, S. et al. Short communication: A model to predict flood loss in mountain areas. Environmental Modelling and Software 117, 176–180, (2019).

    Article  Google Scholar 

  4. Cutter, S., Boruff, B. J. & Shirley, W. L. Social Vulnerability to Environmental Hazards. Social Science Quarterly 84, 242–261, (2003).

    Article  Google Scholar 

  5. Nguyen, K.-A., Liou, Y.-A., Li, M.-H. & Tran, T. A. Zoning eco-environmental vulnerability for environmental management and protection. Ecological Indicators 69, 100–117, (2016).

    Article  Google Scholar 

  6. Liou, Y.-A., Nguyen, K.-A. & Li, M.-H. Assessing spatiotemporal eco-environmental vulnerability by Landsat data. Ecological Indicators 80, 52–65, (2017).

    Article  Google Scholar 

  7. Nguyen, K.-A., Liou, Y.-A. & Terry, J. P. Vulnerability of Vietnam to typhoons: A spatial assessment based on hazards, exposure and adaptive capacity. Science of the Total Environment 682, 31–46, (2019).

    ADS  CAS  Article  PubMed  Google Scholar 

  8. Papathoma, M., Dominey-Howes, D., Zong, Y. & Smith, D. Assessing Tsunami Vulnerability, an example from Herakleio, Crete. Natural Hazards and Earth System Sciences 3, 377–389, (2003).

    ADS  Article  Google Scholar 

  9. Tarbotton, C. et al. In Natural Hazards in the Asia-Pacific Region: Recent Advances and Emerging Concepts Vol. Special Publications 361 (eds Terry, J. P. & Goff, J.) 115–125 (Geological Society, London, 2012).

  10. Gent Franch, K. A., Morbelli, G. M. G., Astroza Inostroza, M. A. & Gori, R. A seismic vulnerability index for confined masonry shear wall buildings and a relationship with the damage. Engineering Structures 30, 2605–2612, (2008).

    Article  Google Scholar 

  11. Balica, S. F., Douben, N. & Wright, N. G. Flood vulnerability indices at varying spatial scales. Water Sciences and Technology 60.10, 2571–2580, (2009).

    Article  Google Scholar 

  12. de Ruiter, M. C., Ward, P. J., Daniell, J. E. & Aerts, J. C. J. H. Review article: A comparison of flood and earthquake vulnerability assessment indicators. Natural Hazards and Earth System Sciences 17, 1231–1251, (2017).

    ADS  Article  Google Scholar 

  13. FEMA. Guidelines for design of structures for vertical evacuation from tsunamis. (Redwod City, California, 2008).

  14. Iverson, R. M. The Physics of Debris Flows. Reviews of Geophysics 35, 245–296, (1997).

    ADS  Article  Google Scholar 

  15. Ko, H. T.-S. & Ye, H. On the splash-up of tsunami bore-impact. Coastal engineering 131, 1–11, (2018).

    Article  Google Scholar 

  16. Tarbotton, C., Dall’Osso, F., Dominey-Howes, D. & Goff, J. The use of empirical vulnerability functions to assess the response of buildings to tsunami impact: comparative review and summary of best practice. Earth-Science Reviews 142, 120–134, (2015).

    ADS  Article  Google Scholar 

  17. Fuchs, S., Keiler, M., Ortlepp, R., Schinke, R. & Papathoma-Köhle, M. Recent advances in vulnerability assessment for the built environment exposed to torrential hazards: challenges and the way forward. Journal of Hydology 575, 587–595, (2019).

    Article  Google Scholar 

  18. Birkmann, J. In Measuring Vulnerability to Natural Hazards: Towards disaster resilient societies (ed. Birkmann, J.) 55–77 (UNU Press, 2006).

  19. Fuchs, S., Frazier, T. & Siebeneck, L. In Vulnerability and Resilience to Natural Hazards (eds Fuchs, S. & Thaler, T.) 32–52 (Cambridge University Press, 2018).

  20. OECD. Handbook on Constructing Composite Indicators: Methodology and User Guide. (OECD Publications, Paris, 2008).

  21. Becker, W., Saisana, M., Paruolo, P. & Vandecasteele, I. Weights and importance in composite indicators: closing the gap. Ecological Indicators 80, 12–22, (2017).

    Article  PubMed  PubMed Central  Google Scholar 

  22. Papathoma-Köhle, M., Cristofari, G., Wenk, M. & Fuchs, S. The importance of indicator weights for vulnerability indices and implications for decision making in disaster management. International Journal of Disaster Risk Reduction 36, 1–12, (2019).

    Article  Google Scholar 

  23. Gan, X., Fernandez, I. C., HGuo, J., Wilson, M. & Zhao, Y. When to use what: Methods for weighting and aggregating sustainability indicators. Ecological Indicators 81, 491–502, (2017).

    Article  Google Scholar 

  24. Nardo, M., Saisana, M., Saltelli, A. & Tarantola, S. Tools for Composite Indicators Building. (JRC, 2005).

  25. Papathoma-Köhle, M., Neuhauser, B., Ratzinger, K., Wenzel, H. & Dominey-Howes, D. Elements at risk as a framework for assessing vulnerability of communities to landslides. Natural Hazards and Earth System Sciences 7, 765–779, (2007).

    ADS  Article  Google Scholar 

  26. Kappes, M., Papathoma-Köhle, M. & Keiler, M. Assessing physical vulnerability for multi-hazards using an indicator-based methodology. Applied Geography 32, 577–590, (2012).

    Article  Google Scholar 

  27. Silva, M. & Pereira, S. Assessment of physical vulnerability and potential losses of buildings due to shallow slides. Natural Hazards 72, 1029–1050, (2014).

    Article  Google Scholar 

  28. Mazzorana, B. et al. A physical approach on flood risk vulnerability of buildings. Hydrology and Earth System Sciences 18, 3817–3836, (2014).

    ADS  Article  Google Scholar 

  29. Milanesi, L., Pilotti, M., Belleri, A., Marini, A. & Fuchs, S. Vulnerability to flash floods: a simplified structural model for masonry buildings. Water Resources research 54, 7177–7197, (2018).

    ADS  Article  Google Scholar 

  30. Thouret, J.-C. et al. Assessing physical vulnerability in large cities exposed to flash floods and debris flows: the case of Arequipa (Peru). Natural Hazards 73, 1771–1815, (2014).

    Article  Google Scholar 

  31. Ettinger, S. et al. Building vulnerability to hydro-geomorphic hazards: estimating damage probability from qualitative vulnerability assessment using logistic regression. Journal of Hydrology 541(Part A), 563–581, (2016).

    ADS  Article  Google Scholar 

  32. Thennavan, E., Ganapathy, G. P., Sekaran, S. S. C. & Rajawat, A. S. Use of GIS in assessing building vulnerability for landslide hazard in The Nilgiris, Western Ghats, India. Natural Hazards. (2016).

    Article  Google Scholar 

  33. Beccari, B. A Comparative Analysis of Disaster Risk, Vulnerability and Resilience Composite Indicators. PLOS Current Disasters Edition 1, (2016).

  34. Dall’Osso, F., Gonella, M., Gabbianelli, G., Withycombe, G. & Dominey-Howes, D. A revised (PTVA) model for assessing the vulnerability of buildings to tsunami. Natural Hazards and Earth System Sciences 9, 1557–1565, (2009).

    ADS  Article  Google Scholar 

  35. Sturm, M. et al. Experimental analyses of impact forces on buildings exposed to fluvial hazards. Journal of Hydrology 565, 1–13, (2018).

    ADS  Article  Google Scholar 

  36. Sturm, M. et al. Understanding impact dynamics on buildings caused by fluviatile sediment transport. Geomorphology 321, 45–59, (2018).

    ADS  Article  Google Scholar 

  37. Kursa, M. & Rudnicki, W. Feature Selection with the Boruta package. Journal of Statistical Software 36, 1–13, (2010).

    Article  Google Scholar 

  38. Mitchell, A. The Esri Guide to GIS Analysis. Volume 1: Geographic Patterns and Relationships. (Esri Press, 1999).

  39. UNISDR. UNISDR Terminology on Disaster Risk Reduction. (UN, 2009).

  40. Hastie, T., Tibshirani, R. & Friedman, J. The Elements of Statistical Learning-Data Mining, Inference, and Prediction. (Springer, 2009).

  41. Nilsson, R., Pena, J. M., Björkegren, J. & Tegner, J. Consistent Feature Selection for Pattern Recognition in Polynomial Time. Journal of Machine Learning Research 8, 589–612 (2007).

    MathSciNet  MATH  Google Scholar 

  42. Totschnig, R., Sedlacek, W. & Fuchs, S. A quantitative vulnerability function for fluvial sediment transport. Natural Hazards 58, 681–703, (2011).

    Article  Google Scholar 

  43. Totschnig, R. & Fuchs, S. Mountain torrents: quantifying vulnerability and assessing uncertainties. Engineering Geology 155, 31–44, (2013).

    Article  PubMed  PubMed Central  Google Scholar 

  44. Hübl, J. et al. Dokumentation der Wildbachereignisse vom 22./23. August 2005 in Tirol, Band 1: Generelle Aufnahme (5W-Standard); IAN Report 109 Band 1, Institut für Alpine Naturgefahren, Universität für Bodenkultur-Wien (unpublished) (2005).

  45. Hübl, J. et al. Dokumentation der Wildbachereignisse vom 22./23. August 2005 in Tirol. (Institut für Alpine Naturgefahren, Universität für Bodenkultur-Wien (unpublished), 2006).

  46. Papathoma-Köhle, M., Totschnig, R., Keiler, M. & Glade, T. Improvement of vulnerability curves using data from extreme events. Natural Hazards 64, 2083–2105, (2012).

    Article  Google Scholar 

  47. Pfitscher, A. Wasserkatastrophen in Martelltal - Der 24./25. August 1987. (Municipality Martell, Martell, 1996).

Download references


Maria Papathoma-Köhle has been supported by the Austrian Science Fund (FWF): V-519-N29 and Sven Fuchs received funding from the Austrian Science Fund (FWF): P27400-NBL.

Author information

Authors and Affiliations



M.P.-K. was responsible for the design of the methodology, the collection of data, the scoring, normalization and aggregation of the data to an index and the development of the GIS databases. M.S. was responsible for the statistical analysis of the data in R, the weighting of the indicators and data visualization. S.F. judged the indicator results to existing empirically-gained vulnerability functions. All authors jointly have written the manuscript.

Corresponding author

Correspondence to Maria Papathoma-Köhle.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Papathoma-Köhle, M., Schlögl, M. & Fuchs, S. Vulnerability indicators for natural hazards: an innovative selection and weighting approach. Sci Rep 9, 15026 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing