Studies of the seasonal and annual patterns of glacier velocities improve our understanding of the ice volume, topography, responses to climate change, and surge events of glaciers. Such studies are especially relevant and equally rare for the Himalayan glaciers, which supply many rivers that sustain some of the most heavily populated mountainous regions in the world. In particular, the control of the hypsometric distribution of geomorphometric parameters, such as slope, aspect, and curvature, on the dynamics of Himalayan glaciers have never been studied so far, at the river basin scale. Here, we present the degree to which topographic and hypsometric parameters affect the seasonal and annual average flow velocities of 112 glaciers in the Baspa River basin in the Western Indian Himalaya by analysing Global Land Ice Velocity Extraction from Landsat 8 (GoLIVE) datasets for the years 2013–2017. We observe, (i) significant heterogeneity in topographic controls on the velocities of these glaciers, (ii) elevation and the seasons play important roles in regulating the degree to which morphometric parameters (slope, aspect, and curvature) affect these velocities, (iii) a possible polythermal regime promoting both sliding and deformational forms of motion in a majority of these glaciers, and (iv) a detailed analysis of complex topographic controls within various elevation zones using a novel hypso-morphometric approach. These findings can help us to better model the dynamics of Himalayan glaciers and their responses to the future climatic scenarios. The inferences also suggest the need to incorporate dynamic topography in glacio-hydrological models in the wake of constant glacial evolutions.
Global glacier monitoring is pertinent for observing the direct impacts of changes in climate on water security and future sea levels1. Although mountain glaciers constitute only ~3% of the global glacial area2, the need for precise areal and volumetric estimations of mountain glaciers is well established; they contribute immensely to sea-level rise, owing to their latitudinal vulnerability and rapid melting rates under present climate scenarios2,3,4,5. A particular need to focus on the Hindu Kush-Himalayan (HKH) glaciers arises because these glaciers represent ~50% (by area)6 of all of the glaciers outside of the poles, and their meltwater sustains a downstream population of ~1.3 billion people6,7. The amplified occurrence of extreme weather events8 and glacial disasters9,10,11,12 in the HKH mountains further emphasise the need for extensive glacio-hydro-meteorological database generation and research in the coming years13. However, the uncertainties in the understanding of the status and future of glaciers and climate change in the Himalayan region are high14, owing to the scarcity and fragmentary nature of the applicable glacio-meteorological records6,7,15, a geopolitical reluctance to share data16, and the extreme terrain and inclement climate of the region, which complicates the efforts of glacio-hydrological measurements17,18. Assessments and predictions of the recession of the HKH glaciers and their hydrology using presently available datasets are alarming and indicate a disastrous future for the region19.
Seasonal and annual estimates of glacier velocities can be useful in assessing glacier ice thicknesses and bed topography20, mass changes21, glacier retreats and advances22, glacial erosion23, and glacier flow regimes24. Moreover, investigating the patterns and estimates of glacier flows with respect to their surface topography can further increase our understanding of the topographic controls on glacier motion25. Such attempts have been made to study surge-type glaciers in Svalbard26, the Scandinavian ice sheets27, past ice sheets28, and the Greenland ice sheet29. However, barring a few attempts that consider the slope and distribution of elevation23,30, such studies are lacking for the Himalayan glaciers. Particularly, a holistic study that takes into account all the primary morphometric and topographic parameters, such as slope, aspect, curvature, and distribution of elevation is completely missing in the Himalayan context. Most of the Himalayan glaciers, with a few exceptions14, are undergoing rapid recession and the related morphological changes31,32, leading to changes in their flow regimes33. Definitive information on topographic controls on glacier flows can be extremely informative in predicting the future dynamics of glaciers.
In the present study, we attempt to fill several research gaps in our understanding of topographic controls over Himalayan glacier velocities by unravelling the heterogeneity in the effects of various topographic parameters on glacier flow. (i) The analyses encompass all the primary morphometric and topographic parameters, such as slope, aspect, curvature, and elevation distribution. (ii) To derive reliable conclusions, we normalise the climatic and geological variability by analysing all of the glaciers within a single river basin; thus, only the effects of topography are emphasised. (iii) We perform the analyses on seasonal time scales (i.e., for the pre-melt, melting, and post-melt seasons) so that the variations in the velocities in areas with the same topography in different seasons can be observed. (iv) Using field observations, we provide suitable thresholds for the peak correlation values and the differences in correlation values between the primary and secondary peaks derived from the Global Land Ice Velocity Extraction from Landsat 8 (GoLIVE) data34,35 for the years 2013–2017 to obtain reliable, basin-scale velocities for such analyses for the first time for Himalayan glaciers. Finally, (v) we also suggest hypso-morphometric analyses as a novel approach where the control of morphometric parameters is separately evaluated for different hypsometric zones in order to better disentangle the contributions from topography.
Our study aims at determining the extent of topographic and hypsometric controls on the seasonal and annual average flow velocities of 112 glaciers of Baspa River basin in the Western Indian Himalaya (Fig. 1) that were sufficiently large to encompass at least one representative velocity pixel from the GoLIVE products and to permit the reliable extraction of second-order geomorphometric derivatives36 (see Methods). The glaciers in this river basin have been extensively studied for remote sensing-based mapping37,38, glacier dynamics33, glacial lakes39, and runoff estimations40. The glaciers are located within the altitudinal range of ~4,100–6,450 m and have an average mean elevation of ~5,180 m and an average mean slope of 18.2°, as derived from Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model Version 2 (ASTER GDEM V2) data. We use the ASTER GDEM V2 data to derive all of the morphometric parameters used in this study because ASTER is one of the most appropriate data sources from which 3D information can be generated for cryospheric applications36 and the ASTER GDEM V2 data are reported to have considerable accuracy in this part of the Himalaya41. Furthermore, the ASTER GDEM V2 data are not affected by snow penetration issues that synthetic aperture radar (SAR)-based DEMs can display42. The mean upper limit of debris cover (ULDC) and the mean elevation of the transient snow line (TSL) for these glaciers, as observed towards the end of the hydrological year on 18 September 2013 Landsat 8 image for these glaciers are 4994.41 ± 238.2 m and 5442 ± 150.7 m, respectively. The total basin area is ~1,100 km2, ~187 km2 of which is glaciated; the areas of the selected glaciers vary between ~0.06 km2 and 33 km2, with a mean of ~1.67 km2 and a standard deviation of ~5 km2. Thus, there is a considerable degree of heterogeneity in the size of the glaciers in this region further making their hypsometric distributions even more relevant. The average hypsometric profile (Fig. 1a) and the derived hypsometric index (HI) of 1.13 (see Methods) suggest that most of these glaciers are either bottom-heavy or equidimensional43. We observe significant heterogeneity in hypso-morphometric controls on the velocities of these glaciers, the elevation being responsible for the remaining topographic parameters to differentially control the velocities. The highest glacier velocities were observed during the melting and pre-melt seasons, followed by the post-melt season, which highlights the influence of westerly-derived winter accumulation on the cumulative dynamics of the glaciers in this part of the Himalaya.
Average seasonal and annual velocities from thresholded GoLIVE products
In this study of Western Himalayan glaciers, we employed and explored a new glacier velocity product called GoLIVE (https://nsidc.org/data/NSIDC-0710/versions/1#pan)34,35 derived from cross-correlation of pixel positions in Landsat 8 repeat imagery. In addition to velocity component rasters, these data also contain quality control rasters, such as the peak correlation values (corr) and the differences in correlation values between the primary and secondary peaks (del_corr). Although annual average velocities are sufficient to derive key interpretations, shorter temporal repeats lead to less decorrelation between remote sensing images44 and allow us to extend the analyses to the seasonal scale. We performed a thorough thresholding of these data, as described in detail in the Methods section, to obtain the most reliable velocity pixels and to proceed further with the remainder of the analyses. Briefly, (i) we segregated the available GoLIVE data (Fig. 2a) according to the hydrological seasons in the study area determined from published field runoff measurements40 and long-term temperature records (1985–2007) from the Rakchham (3045 m asl) observatory (Fig. 2b) marked in Fig. 1a40. (ii) We established optimal thresholds for the corr (>0.4) and del_corr (>0.3) rasters, based on the available field velocity measurements33,38 for various seasons. (iii) Further, we discarded any seasonal or annual average velocity pixels that are over 2 standard deviations (2 SDs) of the velocity values, in order to use only the most reliable velocity values in our analyses. Finally, (iv) we performed Ordinary Least Squares (OLS) linear regression analyses (Supplementary Fig. 1) before and after the 2 SD thresholding to observe improvements and the degree of topographical controls as explanatory variables for velocities, and to perform additional thresholding of the pixels that show the smallest degree of topographic control by excluding ±1 SD of the standardised residuals for the OLS-modelled velocities compared to the GoLIVE velocities (see Methods). As a result of this entire preprocessing procedure, we obtain a reliable product for use in the additional analyses. Figure 2d shows the comparison between the annual averages of the daily velocities obtained from the thresholded GoLIVE datasets and the in situ average velocity measurements; the coefficient of determination (R2) is 0.82, and the root mean squared error (RMSE) is 0.11 m/day. A statistical description of the obtained yearly and seasonal averages of the daily velocities after all of the levels of thresholding have been performed is given in Table 1.
The values in Table 1 depict several characteristics of the glacier dynamics in this region of the Himalaya. First, the velocities during the melting and pre-melt seasons are significantly greater than those during the post-melt season and regulate the annual average velocities. Second, the parts of the glaciers between the ULDC and the TSL, which usually represent clean-ice zones and icefalls on most of the glaciers (Fig. 3), show the highest velocities in all seasonal and annual averages. Third, the areas above the TSL, normally representing cirque or uppermost portions of accumulation zones with presence of some snow even at the end of the hydrological year (in this case, August-September), display velocity values that are lower than those observed in the middle clean-ice parts but are higher than the debris-covered parts below the ULDC. These values and observations are largely consistent with the reported glacier velocities from this part of the world (except for the surging glaciers). Thus, these results demonstrate the high usability of the GoLIVE data, together with the proposed corr and del_corr thresholds, for monitoring the regional-scale dynamics of the Himalayan glaciers. For example, the observed average velocities in the upper and lower ablation zones of the benchmark Himalayan glacier, Chhota Shigri in the Lahul and Spiti Valley north of Baspa Valley, are >45 m/year and ~25 m/year, respectively45. These values agree with the results of other studies that have examined the same glacier46,47; the summer velocities are slightly greater than the annual averages. At high elevations in the Everest region in the Central Himalaya, average glacier velocities in excess of 40–50 m/year have also been reported, with the lower debris-covered parts displaying minimal movements9,23,30. For clean-ice ablation zones, the glaciers of the Everest region display velocities of less than 30 m/year9. Within the area between the mean ULDC and the mean TSL, which represents the upper ablation zones of the Baspa Valley glaciers, we observe mean annual velocities of ~51 m/year; the melting season velocities marginally exceed the annual average values. Similarly, for the glacier-covered area below the mean ULDC, which represents the lower ablation zone, we observe average annual velocities of ~25.55 m/year, and the flow rates show good regional congruence. This signifies that the seasonal parameters in this monsoon transition zone of the Himalaya not only complicate the glacier dynamics but they also display a significant control over glacier motion. In fact, even for the higher northern latitudes of Alaska, the seasonal velocity trends are similar; the melting season, which features relatively high values, is followed by the pre-melt and post-melt seasons44.
Velocity distribution with respect to topography and the probable polythermal regime
Further analyses of the thresholded velocity values with respect to various topographic parameters reveal the significant control exerted by elevation on glacier flow. In Fig. 4, the deviance bars show the ±1 SD ranges of the velocities for the different topographic classes of a parameter within the same season and must not be confused with error bars, even those in the following figures. The mean standard deviation values shown in Fig. 4 are seasonal averages for a given topographic parameter. The relatively high intra-season SD values and significantly greater average SD value for the elevation parameter highlights its predominant control over the glacier flow, followed by the aspect, slope, and curvature parameters. This result is understandable given that, as elevation changes, the topography and hypsometry vary and the effects of seasonal parameters, such as temperature and precipitation, become pronounced. Since this part of the Western Himalaya is situated in the monsoon transition zone7,48 and receives both summer monsoonal precipitation and substantial winter precipitation from the westerlies, the hypsometric profile plays a significant role in seasonal cloud accumulation and the subsequent precipitation. This significance of high-accumulation cirque zones in maintaining rapid ice flow has also been reported for several coastal glaciers in Alaska44. In addition, the upper reaches of Himalayan glaciers usually receive considerable contributions from avalanches30,49,50, which increase the ice load and the subsequent downward flow (Fig. 5). In fact, the longer glaciers in the basin can directly be correlated to their higher accumulation zones, which are vital for sustaining persistently flowing ice streams in the lower reaches of these glaciers. A similar type of climate regime has also been observed in the Mount Everest region48, and the degree of elevation control on glacier flow is reported to be immense30, as the glaciers fed by high-altitude cirques possess substantial amounts of active ice. The reported velocities for the longest Himalayan glacier, Siachen glacier in the Karakoram also display strong elevation control51 as, in this part of the Himalaya, westerlies contribute significantly to accumulation, and several surging glaciers have been reported to result from combined effects of the local climate and topography52.
The elevation classes shown in Fig. 4a were not selected randomly; instead, they are based on three main factors. First, in order to avoid sampling bias, we established classes with equal intervals and optimal sizes so that they would all encompass a sufficient number of reliable thresholded velocity pixels, which is extremely crucial for the hypso-morphometric analyses presented in the next section. Second, with 8 classes of equal intervals, we obtained an elevation rise of ~290 m per class, which also provided an approximate temperature change of ~2 °C within each class, based on the published seasonal lapse rate for the study area37. This separation was vital in differentiating the various thermal regimes over the glaciers and their control on the flow rates. Third, and most importantly, the ~290 m per class range accounts for the ±150.7 m SD of the TSL and provides a definite class (5271–5561 m) above it, where the majority of the glaciers in the basin have their accumulation zones. Similarly, it also establishes that the classes 4981–5271 m (ULDC) and 5271–5561 m represent clean glacier ice or icefall zones for the majority of the glaciers in the basin (Fig. 3). In Fig. 4a, it is apparent that the observed seasonal and annual averages of the daily velocities are considerably higher for these middle elevation zones. In addition, for all of the elevation zones, we clearly observe a constant seasonal pattern in the velocities (melting > pre-melt > post-melt). For the post-melt season, apart from the clean-ice zones, the velocities do not show significant variations in either the debris-covered parts or accumulation zones, where the velocities vary between ~0.02 and 0.05 m/day; on the other hand, for the velocities in pre-melt and melting seasons in these zones, the deviation ranges from ~0.05 to 0.14 m/day. This result shows the importance of both winter snow loading followed by rapid surface melting, in regulating glacier velocities in this part of the Himalaya. These results further indicate that the sliding motion may not be the only important factor; instead, deformational flow generated by the accumulated winter snow loading provided by the westerlies is equally vital in controlling glacier movements in the Western Himalaya. During the pre-melt seasons, episodes of the westerlies are quite frequent in these mountains; when the weight of this newly deposited snow exceeds the carrying capacity of the weakest layer of the snow on a slope, it causes significant creep, as well as snowpack fractures and avalanches53.
The exact thermal regimes of these glaciers were previously unknown until now, owing to the research and data deficiencies. Due to the results of the present study, however, we can get a clue about these thermal regimes. As mentioned above, the average annual velocities and their patterns in these mountains match closely with those of the glaciers in the Mount Everest region9,23,30, which have been reported to display polythermal regimes54,55,56,57,58. Based on Weertman’s sliding law59, which describes both pressure melting and creep-rate enhancement driven by stress concentration as factors in producing noticeable glacier motion, we can safely derive a preliminary analogy regarding the polythermal regimes of a majority of the Western Himalayan glaciers.
Active fractures, such as crevasses and moulins, are known to be prevalent on such polythermal glaciers carrying supraglacial meltwater into the polythermal englacial environment60 and facilitating the typical polythermal glacier flow patterns as described above. The glaciers in the Western Himalaya have been reported to possess significant proportions of crevasses, owing to the differential glacial motion (Figs 3 and 5), and seasonal dynamics related to their orientations and creep38. One of these seasonal dynamics is the cyclicity in crevasse orientations, which has been reported from a glacier in the Baspa River basin38, thus highlighting the significant roles of crevasses in maintaining polythermal glacier flow regimes. Such dynamics of refreezing or annealing of surface crevasses and fractures have previously been attributed to the polythermal controls on the glacier velocities in the Arctic, as well as in the Himalaya61,62,63,64,65,66. Figure 4b shows a gradual increase in the velocity with increasing surface slope, which favours both sliding motion and deformational flow produced by the accumulated winter snow loading. Similarly, the south-facing (S, SE, and SW-facing) slopes on the glaciers show significantly higher velocities than the other slopes (Fig. 4d), probably because these slopes are most prone to year-round melting in the Himalayan context. Nevertheless, the fact that the velocities on these south slopes are closely followed by the velocities on the west slopes also emphasises the importance of snow accumulation in driving glacier flow. The south-facing slopes are more susceptible to receiving the maximum amounts of snow during the monsoon season and are also vulnerable to the subsequent melting, as they receive direct sunlight over the maximum duration on any given day in the same season. Similarly, the west-facing slopes are more likely to receive contributions from the westerlies in the winter and drive the deformational flow in the pre-melt and melting seasons. To understand Fig. 4c, an understanding of the flat curvature is important; it should not be confused with a flat slope or the aspect. A flat curvature does not primarily reflect a flat slope; instead, it includes even slopes with significant inclinations and represents the shape or curvature of the slope. The surface curvature parameter in Fig. 4c further strengthens our premise that glacier motion in this part of the Himalaya is driven equally by surface melting and surface loading. The post-melting season, when the snow loading is minimal, shows nearly similar velocity values for all three curvature classes (Fig. 4c). However, velocities with nearly double these values are observed during the other two seasons, which are more favourable for snow loading and melting. Furthermore, the fact that the average velocities displayed by the flat and convex surface classes, which are more susceptible to instabilities and deformational motion due to snow loading50,53, are greater than the velocities observed for the concave curvatures illustrates the significant controlling forces exerted by snow seasonality.
Hypso-morphometric variations in velocity distribution
Based on the results discussed in the previous section, the greater impact of elevation over other morphometric parameters becomes evident, for the intuitive reason that elevation changes also account for temperature and precipitation variations and facilitate the separate consideration of debris-covered, clean-ice, and snow-covered zones. Although the plots in Fig. 4 yield some vital clues regarding the effects of topography, re-examining them using a hypso-morphometric approach that considers slope, aspect, and curvature classes separately for different elevation zones (Fig. 4a) helps us to further untangle the complexities of the effects of topographic variables. For example, Fig. 6 represents one such hypso-morphometric distribution of the velocities across various slope classes in different elevation zones. The pattern of the velocities across different elevation zones is similar for all of the slope classes; however, for steeper slopes (Fig. 6c,d) the magnitudes of the velocities clearly become pronounced at middle elevations that contain clean-ice zones. The 0°–10° (gentle) slopes are not present at the highest elevation zones, which mainly represent the steep headwalls that are prone to avalanching. The velocities that correspond to the post-melt season shown in Fig. 4b do not show significant deviations. Even in Fig. 6, the noticeable deviations in the velocities seen in the post-melt season are observable only in the middle elevation classes unlike the velocities in rest of the seasons where velocity changes are noticeable in all of the elevation classes. One anomalous observation can be made for the melting season velocities at relatively low elevations (4401–4691 m) on the steepest slopes (Fig. 6d). The exact reason for this increase in the velocities in the debris-covered parts during the melting season is difficult to determine. However, it may be related to the fact that thick debris cover considerably impedes melting40; the areas with the steepest slopes between 4401–4981 m typically represent areas at lower elevations that adjoin lateral moraines and have comparatively thin or no debris to hamper melting or flow during the snow-free months (for an example, see Fig. 7). Interestingly, such regions with limited debris are absent in the lowest elevation zones that contain the heavily debris-covered snouts of nearly all of the glaciers (for an example, see Fig. 7).
Figure 8 displays similar hypso-morphometric velocity distributions for the three curvature classes. The flat curvatures cannot be observed for the highest elevations, whereas valid velocity pixels are absent for the flat curvatures seen at the lowest elevations in the pre-melt season (Fig. 8b). The general patterns of the velocities across the elevation ranges are as expected (middle elevations > higher elevations > lower elevations). However, one relevant conclusion can be drawn from this distribution regarding the pre-melt season velocities for convex curvatures at the lowermost and uppermost elevations (Fig. 8c), where the presence of thick debris or the lowest temperatures, respectively, discourage melting most strongly. The pre-melt velocities are the highest at these elevations, due to the significant controlling effect of unstable convex curvatures50,53 in the snow-covered months, which overcomes the non-melting factors and likely promotes deformational motion during the winter months. Taking a closer look at the aspect profile shown in Fig. 9, several inferences can be obtained that are not directly evident from Fig. 4d. Specifically, in general, the pattern of the velocities is as expected, i.e., middle elevations > higher elevations > lower elevations, and melting > pre-melt > post-melt. However, several seasonal and altitudinal patterns of variation are worth discussing. For example, we see considerable numbers of instances in which the pre-melt velocities exceed the melting season velocities at higher elevations for the aspects that do not directly face the sun (Fig. 9a–c,h) and are not prone to high melting. These results hint at the dominance of deformational flow at the local scale. Similarly, the sun-facing aspects (Fig. 9d, e, f) display the highest velocities of all of the elevation zones and seasons, thus highlighting the significant influence of glacier melt on ice flow. Moreover, the magnitude of the deviations from the seasonal means is significantly higher for these sun-facing aspect classes (these values even exceed 0.1 m/day in most instances) across the lower and middle-to-high elevation zones. This result further emphasises that, in the absence of debris cover, melting-induced glacier flow can increase exponentially; in several cases, it even triples (Fig. 9d–f).
The outcomes of this study are relevant in several respects regarding our understanding of the complex dynamics of Himalayan glaciers at the regional scale. In addition to the regular glacier facies67,68, the glaciers in this part of the Himalaya are significantly debris-covered37. As we observe in the present study, although the geomorphometric parameters play important roles in regulating the glacier flow, their contributions are significantly enhanced or subdued during various seasons and under different melting conditions within the different glacier facies or debris-covered regions. The significance of debris cover in driving glacier dynamics in the Himalaya is poorly explored and has been neglected in modelling future runoff and sea-level changes32, primarily due to a lack of field data. However, for a start, it is important to quantify and qualitatively observe the effects of debris cover on glacier flow using reliable satellite-based data, and the present study indicates that the GoLIVE data appear to be an easily available and useful product for performing glaciological research at large spatial and temporal scales. A crucial contribution of this work involves identifying the proper cross-correlation thresholds to refine the GoLIVE data for Western Himalayan glaciers. After applying all of the levels of refinements, none of the studied glaciers show any anomalous pattern or magnitude of flow that should be discussed in detail. Therefore, this cumulative basin-scale analysis of the glaciated areas provides meaningful and sequential information about the primary controls for glacier velocities in the Western Himalaya. These methods to analyse seasonal velocity patterns for the Western Himalayan glaciers are demonstrated here as a short-term analysis (2013–2017) based on the GoLIVE data availability and can further be implemented on longer-time scales to (i) predict glacial changes and to issue disaster warnings, and (ii) to assess the role of other time-varying factors (including climate change, albedo changes, crust deformations, anthropogenic activities, and earthquakes) in controlling the glacier dynamics.
Another conclusion of this work is that, through an analogy with the published velocity records and patterns from the Mount Everest region and the Bhutan Himalaya, we are able to draw the preliminary conclusion that the flow of most Western Himalayan glaciers in the monsoon transition zone might be governed equally by both melt-facilitated sliding and deformational creep; moreover, these glaciers display the characteristics of polythermal glaciers. However, we are aware that exceptions may exist at local scales and for low-altitude glaciers and bottom-heavy glaciers with considerable debris cover. The lower-elevation margins and surface ice of polythermal glaciers are typically cold-based, whereas the higher-elevation accumulation regions are warm-based69; thus, glacier movement takes place via both basal sliding and subglacial deformation in the accumulation area of polythermal glaciers, but it is driven almost entirely by deformation within the cold-based, lower-elevation portions of polythermal glaciers. However, the presence of excess debris cover (as is seen in the Western Himalaya) can further increase the complexity of glacier flow in polythermal regimes. These factors and the developed stresses can together lead to the deformation of proglacial permafrost, forming ice-cored moraines and rock glaciers (Supplementary Fig. 2)69,70,71. As highlighted in Supplementary Fig. 2, such proglacial permafrost landforms are abundant in the study area and provide further evidence of the possible polythermal nature of these glaciers.
In this study, we have also proposed a hypso-morphometric approach that can be used to decipher the effects of topography in greater detail, and the usefulness of this technique has already been discussed in the results section. However, one additional benefit of this approach is its minimal dependence on the type of DEM selected to derive the topographic parameters, as the entire hypso-morphometric analysis is performed after dividing the parameters into several classes, which is essentially an averaging approach. To assess the biases that may enter into these analyses due to the use of a particular type of DEM (here the ASTER GDEM V2 data), as a control measure, we attempted to perform a similar analysis using a newly released DEM that is constitutionally different from the ASTER GDEM V2 data and is reportedly the most precise global-scale elevation data72,73. This dataset is named the Advanced Land Observing Satellite (ALOS) Global Digital Surface Model (ALOS World 3D - 30 m; AW3D30). Although at very local scales, we observed some topographic differences between the two DEMs (for example, mean elevation differences of up to ~9 m), for the averaged velocity versus hypso-morphometric plots, the velocity patterns match those derived using ASTER GDEM V2 closely; thus, we do not include those plots in the results presented here. Moreover, a comparison of both of the DEMs was not an objective of the present research and could easily amount to a separate research topic.
The debris-covered Himalayan glaciers, which receive a significant amount of winter accumulation through the westerlies, are less sensitive to minor temperature increases and melting56; indeed, the results presented in this study show the combined effects of the seasons and topographic parameters on the glaciers. However, for the debris-free parts of the glaciers, topography plays a vital role in determining the surface energy balance, which ultimately affects the melt rate74. Therefore, when performing glacio-hydrological modelling over long time periods, it is not ideal to consider the topography to be temporally constant. In fact, an inverted ablation gradient in the lower glacier reaches has been reported for the polythermal glaciers in the Everest region that is due to increases in debris thickness, thus promoting mid-glacier mass loss75. This effect is causing localised surface lowering at the middle elevations; it is ultimately changing the topography and reducing the glacier velocities, further contributing to the stagnation of the glacier tongues75 and making them prone to detachment. Based on the extent of the effects of the topographic variables that we observe in the present study, we strongly recommend incorporating dynamic topography that reflects the constant evolution of glaciers in models to generate more precise forecasts. The advent of UAVs in glaciology25 provides such opportunities of generating repeated low-cost, high-resolution topographies with unprecedented accuracies and can contribute extensively to the Himalayan glaciological research. Changes in glacier dynamics can significantly affect the dynamics of suspended sediment load with respect to seasonal discharges and temperatures in the Himalayan glacierised catchments76 and since the lower reaches of Baspa River basin are home to several proposed and running hydroelectric projects76, understanding glacier dynamics with respect to different seasons and its effect on the sediment load becomes extremely relevant as one of the future scopes of our study.
Materials and Methods
We used the glacier outlines of the glaciers in South Asia West (Region 14) of Version 5.0 (V5) of the Randolph Glacier Inventory (RGI)77 (https://www.glims.org/RGI/rgi50_dl.html) as the base data. We reprojected the RGI V5 glacier outlines from the geographic coordinate system (GCS) using the World Geodetic System (WGS) 1984 datum to WGS 1984 Universal Transverse Mercator (UTM) coordinates, zone 44N, to ensure their compatibility with the GoLIVE products used here. These glacier outlines are based on satellite images collected in August and September of 2000 and 2001. Because the GoLIVE data used in our study extend from 2013–2017, we updated the outlines using a Landsat 8 image collected on 18 September 2013 (id: LC81460382013261 LGN00) and performed additional refinements using recent high-resolution Google Earth images taken during the snow-free months that cover the study area and field validation, following the well-defined Global Land Ice Measurements from Space (GLIMS) guidelines78. Finally, we decided to include in the analyses only those glaciers with total areas of >0.045 km2 (a total of 112 in the present case), due to the limited spatial resolution of the GoLIVE data. This threshold also helped us to eliminate very small glaciers or glacierets, as second-order geomorphometric derivatives might not be very reliable for very small glaciers36.
To derive the geomorphometric parameters, we employed the Slope, Aspect, and Curvature tools within the Spatial Analyst toolbox of the ArcGIS software package, version 10.4 (http://desktop.arcgis.com/en/arcmap/10.4/get-started/main/get-started-with-arcmap.htm). For a given grid cell, the Slope tool calculates the maximum rate of change in value from that grid cell to its eight neighbouring grid cells, whereas the Aspect tool estimates the direction of the slope in terms of the maximum rate of change in value from each grid cell to its eight neighbours79. The Curvature tool computes the second-order derivative of the input surface on a per-grid-cell basis for each grid cell, for which a fourth-order polynomial is fitted to a surface composed of a 3 × 3 window80,81. The reclassification of these parameters was performed using the Reclassify tool within the Spatial Analyst toolbox of ArcGIS 10.4.
GoLIVE data selection and filtering
A multi-level filtering of the GoLIVE data was performed to ensure that we would proceed through the analyses described in this paper using only the pixels that yielded the most accurate/reliable velocity estimates. For details on the GoLIVE data and suggestions from the developers on its proper utilisation, interested readers can refer to the detailed data description given within User Guide at https://nsidc.org/data/NSIDC-0710/versions/1#pan. These data are already well-filtered and processed (using high-pass spatial filtering, normalised cross-correlation, resampling, correlation strength analysis, sub-pixel offset determination, and adjustment of geolocation errors), and these procedures substantially suppress the errors that arise due to changing snow, cloud cover, and lighting conditions for the pair of images used. In addition, we performed several selection procedures to select the most valid pixels for our research objectives.
First, we decided to use datasets with a relatively short temporal span for the present analyses. For short temporal spans of 16–32 days, the reported accuracy even without additional thresholding can be as high as ~0.02 m/day, as short temporal repeats lead to less decorrelation between remote sensing images44. Therefore, we used data with temporal spans of 16–32 days (Fig. 2a), which also helped us to carry out precise analyses at the seasonal scale. The GoLIVE data are arranged according to Julian day, and the Julian days utilised by us in different years are marked in Fig. 2a.
Second, we determined optimal thresholds for the corr and del_corr rasters, which are provided with the GoLIVE datasets. The corr and del_corr rasters describe the confidence and accuracy of the vector displacement, respectively, and the suggested thresholds given in the GoLIVE User Guide for high confidence and high accuracy are corr >0.3 and del_cor >0.15. However, the developers provide the corr and del_corr field rasters to permit users to investigate the optimal threshold values appropriate for their study area. We first started with different permutations and combinations of the corr and del_corr value thresholds, matched the results with published field velocity measurements derived from DGPS observations33,38 for various seasons, and finally selected the thresholds corr >0.4 and del_corr >0.3. These thresholds are optimal in the sense that they provide reliable velocity estimates (Fig. 2d) and minimise the loss of velocity pixels after thresholding; thus, extensive data gaps or void areas are not produced (Fig. 2c). To implement these thresholds for obtaining the final velocity rasters, we used the con expression within the Spatial Analyst Raster Calculator tool in ArcGIS, version 10.4.
Third, we discarded any seasonal or annual average velocity pixels that exceeded 2 standard deviations (2 SD) of the velocity values in order to use only the most reliable velocity values in our analyses. Further, we performed an OLS linear regression analysis to assess the level of dependency of the velocity values on the topographic parameters. The purpose of this OLS analysis should not be mistaken as our prime objective or as a step that is crucial in obtaining the results presented in this study. Instead, this analysis (which yielded an adjusted R2 value of ~57%) was a first step, and the results hinted that the velocities of these glaciers are not exclusively driven by topography; instead, they are driven by a complex and heterogeneous mixture of debris cover, the seasons, elevations, and the geomorphometric parameters. The OLS linear regression analysis (Supplementary Fig. 1) was performed twice, before and after the >2 SD thresholding. The second round of OLS linear regression was performed to assess the improvements associated with the thresholding and the degree to which the topographic parameters explained the velocities, and to perform an additional thresholding of the pixels that showed the least topographic control by excluding ±1 SD of standardised residuals for OLS-modelled velocities as compared with the GoLIVE velocities. The OLS linear regression also helped us to observe the spatial distribution of the standardised residuals; we observed that they were evenly distributed across the river basin in all of the terrain parameters and classes (Supplementary Fig. 1c) and showed no spatial clustering that would have led to significant biases. The OLS tool is embedded in the Spatial Statistics toolbox of version 10.4 of the ArcGIS software package and requires dependent (velocity in the present case) and explanatory (elevation, slope, aspect, and curvature in the present case) variables in the form of an attribute table for a single feature class. To generate the feature class with all of the needed variables, we followed the approach suggested by Bhardwaj et al.82. We used the Raster to Point tool in the Conversion toolbox of version 10.4 of the ArcGIS software package to generate point shape files for the velocity rasters. Further, we used the Extract Values to Points tool in the Spatial Analyst toolbox of version 10.4 of the ArcGIS software package to extract the corresponding explanatory variables for each of the points. This feature class was then provided as input to the OLS tool, and the processing was carried out without any error message regarding spatial clustering, which can affect model performance. The histograms of the OLS-derived standardised residuals (model over- and under-predictions) of the predicted velocities before and after removing the >2 SD satellite-derived velocity values that are shown in Supplementary Fig. 1a and the improvements in the plots of the standardised residuals in relation to the OLS-predicted velocities before and after the >2 SD thresholding that are shown in Supplementary Fig. 1b highlight the validity of our approach in removing these outliers. Supplementary Fig. 1c shows the spatial distribution of the standardised residual values; blue dots represent under-predictions and red dots represent over-predictions beyond the 1-SD limits, thus highlighting the areas where the velocities could not be modelled accurately using the OLS approach. Thus, we preferred to discard such pixels because we wanted to specifically study the extent to which topographic variables affect velocities. To meet that goal, we needed the velocity pixels that display a dependence on the topographic parameters within a certain level of confidence.
Fourth, we finally averaged out the seasonal velocity values of the thresholded rasters for all of the years to proceed with the analyses. Furthermore, as the last step in the preparation of the GoLIVE database, we used the Zonal Statistics as Table tool within the Spatial Analyst toolbox of version 10.4 of the ArcGIS software package to summarise the values of the final velocity rasters within the reclassified zones of the morphometric rasters. The results were output to tables to permit the generation of the statistical plots and hypso-morphometric analyses presented in this paper.
Hypsometric Index (HI)
Based on the thresholds suggested by Jiskoot et al.43, five categories of glaciers exist: (1) very top-heavy (HI < −1.5), (2) top-heavy (−1.5 < HI < −1.2), (3) equidimensional (−1.2 < HI < 1.2), (4) bottom-heavy (1.2 < HI < 1.5), and (5) very bottom-heavy (HI > 1.5). For our case, the combined HI was 1.13, which is at the boundary between equidimensional and bottom-heavy profiles (i.e., the glaciers in this river basin are predominantly bottom-heavy or equidimensional).
Ethical approval and informed consent
We confirm that this study is based entirely on remote sensing methods and does not involve any biological experiments.
All of the datasets used in the analyses presented here are freely available, and the references have been provided at appropriate places within the paper.
Mackintosh, A. N. et al. Regional cooling caused recent New Zealand glacier advances in a period of global warming. Nat. Commun. 8, 14202 (2017).
Arendt, A. A., Echelmeyer, K. A., Harrison, W. D., Lingle, C. S. & Valentine, V. B. Rapid wastage of Alaska glaciers and their contribution to rising sea level. Science 297, 382–386 (2002).
Cazenave, A. & Nerem, R. S. Present‐day sea level change: Observations and causes. Rev. Geophys. 42, RG3001 (2004).
Radić, V. & Hock, R. Regionally differentiated contribution of mountain glaciers and ice caps to future sea-level rise. Nat. Geosci. 4, 91–94 (2011).
Rivera, A., Acuña, C., Casassa, G. & Bown, F. Use of remotely sensed and field data to estimate the contribution of Chilean glaciers to eustatic sea-level rise. Ann. Glaciol. 34, 367–372 (2002).
Singh, S. et al. Changing climate and glacio‐hydrology in Indian Himalayan Region: a review. WIRES Clim. Change 7, 393–410 (2016).
Shekhar, M. et al. Himalayan glaciers experienced significant mass loss during later phases of little ice age. Sci. Rep. 7, 10305 (2017).
Goswami, B. N., Venugopal, V., Sengupta, D., Madhusoodanan, M. S. & Xavier, P. K. Increasing trend of extreme rain events over India in a warming environment. Science 314, 1442–1445 (2006).
Bolch, T., Buchroithner, M. F., Peters, J., Baessler, M. & Bajracharya, S. Identification of glacier motion and potentially dangerous glacial lakes in the Mt. Everest region/Nepal using spaceborne imagery. Nat. Hazard. Earth Sys. 8, 1329–1340 (2008).
Buchroithner, M. F. & Bolch, T. Glacier Lake Outburst Floods (GLOFs)—Mapping the Hazard of a Threat to High Asia and Beyond. In Impact of Global Changes on Mountains: Responses and Adaptation (eds Grover, V. I., Borsdorf, A., Breuste, J. H., Tiwari, P. C., Frangetto, F. W.) 324–345 (CRC Press, 2014).
Kääb, A. et al. Massive collapse of two glaciers in western Tibet in 2016 after surge-like instability. Nat. Geosci. 11, 114–120 (2018).
Kropáček, J. et al. Repeated glacial lake outburst flood threatening the oldest Buddhist monastery in north-western Nepal. Nat. Hazard. Earth Sys. 15, 2425–2437 (2015).
Holzer, N. et al. Four decades of glacier variations at Muztagh Ata (eastern Pamir): a multi-sensor study including Hexagon KH-9 and Pléiades data. The Cryosphere 9, 2071–2088 (2015).
Bolch, T. et al. The state and fate of Himalayan glaciers. Science 336, 310–314 (2012).
Bolch, T., Buchroithner, M., Pieczonka, T. & Kunert, A. Planimetric and volumetric glacier changes in the Khumbu Himal, Nepal, since 1962 using Corona, Landsat TM and ASTER data. J. Glaciol. 54, 592–600 (2008).
Akanda, A. S. South Asia’s water conundrum: hydroclimatic and geopolitical asymmetry, and brewing conflicts in the Eastern Himalayas. International journal of river basin management 10, 307–315 (2012).
Bhardwaj, A., Joshi, P. K. & Sam, L. & Snehmani. Remote sensing of alpine glaciers in visible and infrared wavelengths: a survey of advances and prospects. Geocarto Int. 31, 557–574 (2016).
Snehmani et al. Modelling the hypsometric seasonal snow cover using meteorological parameters. J. Spat. Sci. 60, 51–64 (2015).
Immerzeel, W. W., Van Beek, L. P. H. & Bierkens, M. F. P. Climate change will affect the Asian water towers. Science 328, 1382–1385 (2010).
McNabb, R. W. et al. Using surface velocities to calculate ice thickness and bed topography: a case study at Columbia Glacier, Alaska, USA. J. Glaciol. 58, 1151–1164 (2012).
Liu, L. et al. Morphometric Controls on Glacier Mass Balance of the Puruogangri Ice Field, Central Tibetan Plateau. Water 8, 496 (2016).
Herman, F., Anderson, B. & Leprince, S. Mountain glacier velocity variation during a retreat/advance cycle quantified using sub-pixel analysis of ASTER images. J. Glaciol. 57, 197–207 (2011).
Scherler, D., Bookhagen, B. & Strecker, M. R. Hillslope‐glacier coupling: The interplay of topography and glacial dynamics in High Asia. J. Geophys. Res-Earth 116, F02019 (2011).
Leprince, S., Berthier, E., Ayoub, F., Delacourt, C. & Avouac, J. P. Monitoring earth surface dynamics with optical imagery. Eos, Transactions American Geophysical Union 89, 1–2 (2008).
Bhardwaj, A., Sam, L., Martín-Torres, F. J. & Kumar, R. UAVs as remote sensing platform in glaciology: Present applications and future prospects. Remote Sens. Environ 175, 196–204 (2016).
Jiskoot, H., Murray, T. & Boyle, P. Controls on the distribution of surge-type glaciers in Svalbard. J. Glaciol. 46, 412–422 (2000).
Arnold, N. & Sharp, M. Flow variability in the Scandinavian ice sheet: modelling the coupling between ice sheet flow and hydrology. Quaternary Sci.Rev. 21, 485–502 (2002).
Marshall, S. J., Clarke, G. K., Dyke, A. S. & Fisher, D. A. Geologic and topographic controls on fast flow in the Laurentide and Cordilleran Ice Sheets. J. Geophys. Res-Sol. Ea. 101, 17827–17839 (1996).
Joughin, I., Smith, B. E., Howat, I. M., Scambos, T. & Moon, T. Greenland flow variability from ice-sheet-wide velocity mapping. J. Glaciol. 56, 415–430 (2010).
Quincey, D. J., Luckman, A. & Benn, D. Quantification of Everest region glacier velocities between 1992 and 2002, using satellite radar interferometry and feature tracking. J. Glaciol. 55, 596–606 (2009).
Barnett, T. P., Adam, J. C. & Lettenmaier, D. P. Potential impacts of a warming climate on water availability in snow-dominated regions. Nature 438, 303–309 (2005).
Scherler, D., Bookhagen, B. & Strecker, M. R. Spatially variable response of Himalayan glaciers to climate change affected by debris cover. Nat. Geosci. 4, (156–159 (2011).
Sam, L., Bhardwaj, A., Singh, S. & Kumar, R. Remote sensing flow velocity of debris-covered glaciers using Landsat 8 data. Prog. Phys. Geog. 40, 305–321 (2016).
Fahnestock, M. et al. Rapid large-area mapping of ice flow using Landsat 8. Remote Sens. Environ. 185, 84–94 (2015).
Scambos, T., Fahnestock, M., Moon, T., Gardner, A. & Klinger, M. Global Land Ice Velocity Extraction from Landsat 8 (Go-LIVE), Version 1, Boulder, Colorado USA. NSIDC: National Snow and Ice Data Center, https://doi.org/10.7265/N5ZP442B, Accessed on: 15 November 2017 (2016).
Quincey, D. J. et al. Digital terrain modeling and glacier topographic characterization. In Global Land Ice Measurements from Space. 113–144 (Springer, 2014).
Bhardwaj, A. et al. Applicability of Landsat 8 data for characterizing glacier facies and supraglacial debris. Int. J. Appl. Earth Obs. 38, 51–64 (2015).
Bhardwaj, A., Sam, L., Singh, S. & Kumar, R. Automated detection and temporal monitoring of crevasses using remote sensing and their implications in glacier dynamics. Ann. Glaciol. 57, 81–91 (2016).
Bhardwaj, A. et al. A Lake Detection Algorithm (LDA) using Landsat 8data: A comparative approach in glacial environment. Int. J. Appl. Earth Obs. 38, 150–163 (2015).
Kumar, R. et al. Development of a Glacio-hydrological Model for Discharge and Mass Balance Reconstruction. Water Resour. Manag. 30, 3475–3492 (2016).
Singh, M. K., Gupta, R. D., Bhardwaj, A. & Ganju, A. Scenario-based validation of moderate resolution DEMs freely available for complex Himalayan terrain. Pure Appl. Geophys. 17, 463–485 (2016).
Kääb, A., Treichler, D., Nuth, C. & Berthier, E. Brief Communication: Contending estimates of 2003–2008 glacier mass balance over the Pamir–Karakoram–Himalaya. The Cryosphere 9, 557–564 (2015).
Jiskoot, H., Curran, C. J., Tessler, D. L. & Shenton, L. R. Changes in Clemenceau Icefield and Chaba Group glaciers, Canada, related to hypsometry, tributary detachment, length–slope and area–aspect relations. Ann. Glaciol. 50, 133–143 (2009).
Burgess, E. W., Forster, R. R. & Larsen, C. F. Flow velocities of Alaskan glaciers. Nat. Commun. 4, 2146 (2013).
Wagnon, P. et al. Four years of mass balance on Chhota Shigri Glacier, Himachal Pradesh, India, a new benchmark glacier in the western Himalaya. J. Glaciol. 53, 603–611 (2007).
Dobhal, D. P., Kumar, S. & Mundepi, A. K. Morphology and glacier dynamics studies in monsoon–arid transition zone: an example from Chhota Shigri Glacier, Himachal-Himalaya, India. Curr. Sci. 68, 936–944 (1995).
Kumar, S. Chhota Shigri Glacier: its kinematic effects over the valley environment, in the northwest Himalaya. Curr. Sci. 77, 594–598 (1999).
Burbank, D. W., Bookhagen, B., Gabet, E. J. & Putkonen, J. Modern climate and erosion in the Himalaya. CR Geosci. 344, 610–626 (2012).
Laha, S. et al. Evaluating the contribution of avalanching to the mass balance of Himalayan glaciers. Ann. Glaciol. 58, 110–118 (2017).
Snehmani, B. A., Pandit, A. & Ganju, A. Demarcation of potential avalanche sites using remote sensing and ground observations: a case study of Gangotri glacier. Geocarto Int. 29, 520–535 (2014).
Kumar, V., Venkataramana, G. & Høgda, K. A. Glacier surface velocity estimation using SAR interferometry technique applying ascending and descending passes in Himalayas. Int. J. Appl. Earth Obs. 13, 545–551 (2011).
Hewitt, K. The Karakoram anomaly? Glacier expansion and the ‘elevation effect,’ Karakoram Himalaya. Mt. Res. Dev. 25, 332–340 (2005).
McClung, D. & Schaerer, P. A. The avalanche handbook. 3rd ed. Seattle (WA): The Mountaineers Books (2006).
Ageta, Y. & Higuchi, K. Estimation of mass balance components of a summer-accumulation type glacier in the Nepal Himalaya. Geogr. Ann. A. 66, 249–255 (1984).
Hewitt, K. Tributary glacier surges: an exceptional concentration at Panmah Glacier, Karakoram Himalaya. J. Glaciol. 53, 181–188 (2007).
Kääb, A. Combination of SRTM3 and repeat ASTER data for deriving alpine glacier flow velocities in the Bhutan Himalaya. Remote Sens. Environ. 94, 463–474 (2005).
Mae, S., Wushiki, H., Ageta, Y. & Higuchi, K. Thermal drilling and temperature measurements in Khumbu Glacier, Nepal Himalayas. Journal of the Japanese Society of Snow and Ice 37, 161–169 (1975).
Shea, J. M., Immerzeel, W. W., Wagnon, P., Vincent, C. & Bajracharya, S. Modelling glacier change in the Everest region, Nepal Himalaya. The Cryosphere 9, 1105–1128 (2015).
Weertman, J. On the sliding of glaciers. J. Glaciol. 3, 33–38 (1957).
Irvine‐Fynn, T. D., Hodson, A. J., Moorman, B. J., Vatne, G. & Hubbard, A. L. (2011). Polythermal glacier hydrology: A review. Rev. Geophys. 49, RG4002 (2011).
Benn, D., Gulley, J., Luckman, A., Adamek, A. & Glowacki, P. S. Englacial drainage system formed by hydrologically driven crevasse propagation. J. Glaciol. 55, 513–523 (2009).
Gulley, J. D., Benn, D. I., Müller, D. & Luckman, A. A cut-and-closure origin for englacial conduits in uncrevassed regions of polythermal glaciers. J. Glaciol. 55, 66–80 (2009).
Gulley, J. & Benn, D. I. Structural control of englacial conduits in Himalayan debris‐covered glaciers. J. Glaciol 53, 399–412 (2007).
Rěhák, J., Ouhrabka, V. & Braun, M. New information about the interior drainage of a subpolar glacier and the structures of medial moraines of the Southwest Spitsbergen. Stud Carsol. 1, 15–56 (1990).
Schroeder, J. Hans glacier moulins observed from 1988 to 1992, Svalbard. Nor. Geogr. Tidsskr. 52, 79–88 (1998).
Vatne, G. Geometry of englacial water conduits, Austre Brøggerbreen, Svalbard. Nor. Geogr. Tidsskr. 55, 24–33 (2001).
Hall, D. K., Ormsby, J. P., Bindschadler, R. A. & Siddalingaiah, H. Characterization of snow and ice reflectance zones on glaciers using Landsat thematic mapper data. Ann. Glaciol. 9, 104–108 (1987).
Muller, F. Zonation in the accumulation area of the glaciers of Axel Heiberg Island, N.W.T. Canada. J. Glaciol. 4, 302–311 (1962).
Hambrey, M. J. & Glasser, N. F. Discriminating glacier thermal and dynamic regimes in the sedimentary record. Sediment. Geol. 251, 1–33 (2012).
Hambrey, M. J. & Huddart, D. Englacial and proglacial glaciotectonic processes at the snout of a thermally complex glacier in Svalbard. J. Quaternary Sci. 10, 313–326 (1995).
Huddart, D. & Hambrey, M. J. Sedimentary and tectonic development of a high-arctic, thrust-moraine complex: Comfortlessbreen, Svalbard. Boreas 25, 227–243 (1996).
Tadono, T. et al. Generation of the 30m-mesh Global Digital Surface Model by ALOSPRISM. Int. Arch. Photogramm. 41 (2016).
Takaku, J., Tadono, T., Tsutsui, K. & Ichikawa, M. Validation of ‘AW3D’ Global DSM Generated from Alos Prism. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Science 3, 25–31 (2016).
Arnold, N. S., Rees, W. G., Hodson, A. J. & Kohler, J. Topographic controls on the surface energy balance of a high Arctic valley glacier. J. Geophys. Res-Earth 111, F02011 (2006).
Benn, D. I. et al. Response of debris-covered glaciers in the Mount Everest region to recent warming, and implications for outburst flood hazards. Earth-Sci. Rev. 114, 156–174 (2012).
Kumar, R. et al. Dynamics of suspended sediment load with respect to summer discharge and temperatures in Shaune Garang glacierized catchment, Western Himalaya. Acta Geophys. https://doi.org/10.1007/s11600-018-0184-4 (2018).
Arendt, A. et al. Randolph Glacier Inventory – A Dataset of Global Glacier Outlines: Version 5.0. Global Land Ice Measurements from Space (USA, Digital Media, 2015).
Raup, B. & Khalsa, S. J. S. GLIMS analysis tutorial. Boulder, CO, University of Colorado, National Snow and Ice Data Center, http://www.glims.org/MapsAndDocs/guides.html, Accessed on: 20 October 2014 (2007).
Burrough, P. A. & McDonell, R. A. Principles of Geographical Information Systems, 190 (Oxford University Press, 1998).
Moore, I. D., Grayson, R. B. & Landson, A. R. Digital Terrain Modelling: A Review of Hydrological, Geomorphological, and Biological Applications. Hydrol. Process. 5, 3–30 (1991).
Zeverbergen, L. W. & Thorne, C. R. Quantitative Analysis of Land Surface Topography. Earth Surf. Proc. Land. 12, 47–56 (1987).
Bhardwaj, A., Sam, L., Martín-Torres, F. J., Zorzano, M. P. & Fonseca, R. M. Martian slope streaks as plausible indicators of transient water activity. Sci. Rep. 7, 7074 (2017).
We thank the National Snow and Ice Data Center (NSIDC) for providing the GoLIVE data free of charge. We thank the United States Geological Survey (USGS) for its Earth Explorer data search engine, which provides useful satellite imagery and terrain data, also at no charge. We thank Dr. Tobias Bolch, University of Zurich for the useful discussions on several aspects of the present study. We also thank the Contribution to High Asia Runoff from Ice and Snow (CHARIS) project on Shaune Garang glacier. CHARIS was funded by the United States Agency for International Development (USAID) and gave us an opportunity to develop the present study while working to meet project objectives. We thank Dr. Shaktiman Singh for sharing the long-term temperature records for the Baspa River basin that were used in his PhD research. L.S. acknowledges the German Academic Exchange Service (DAAD) for her PhD scholarship. A.B. acknowledges the Swedish Research Council (Vetenskapsrådet) for supporting his research in the Himalaya.
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Sam, L., Bhardwaj, A., Kumar, R. et al. Heterogeneity in topographic control on velocities of Western Himalayan glaciers. Sci Rep 8, 12843 (2018). https://doi.org/10.1038/s41598-018-31310-y
A satellite-based comprehensive observation of glaciological characteristics of Shunkalpa (Ralam) Glacier, Central Himalaya, India
Journal of Earth System Science (2021)
Environmental Earth Sciences (2020)
Hydro-geochemical characteristics of glacial meltwater from Naradu Glacier catchment, Western Himalaya
Environmental Earth Sciences (2019)