Leucine-rich repeat kinase 2 (LRRK2) is a large multidomain protein implicated in the pathogenesis of both familial and sporadic Parkinson’s disease (PD), and currently one of the most promising therapeutic targets for drug design in Parkinson’s disease. In contrast, LRRK1, the closest homologue to LRRK2, does not play any role in PD. Here, we use cryo-electron microscopy (cryo-EM) and single particle analysis to gain structural insight into the full-length dimeric structures of LRRK2 and LRRK1. Differential scanning fluorimetry-based screening of purification buffers showed that elution of the purified LRRK2 protein in a high pH buffer is beneficial in obtaining high quality cryo-EM images. Next, analysis of the 3D maps generated from the cryo-EM data show 16 and 25 Å resolution structures of full length LRRK2 and LRRK1, respectively, revealing the overall shape of the dimers with two-fold symmetric orientations of the protomers that is closely similar between the two proteins. These results suggest that dimerization mechanisms of both LRRKs are closely related and hence that specificities in functions of each LRRK are likely derived from LRRK2 and LRRK1’s other biochemical functions. To our knowledge, this study is the first to provide 3D structural insights in LRRK2 and LRRK1 dimers in parallel.
Parkinson’s disease (PD) is the second most common neurodegenerative movement disorder. It affects 1–2% of all people above the age of 651 and is at present incurable, although treatments are available to alleviate the symptoms. Genetic studies have identified several genes involved in PD pathogenesis. The leucine rich repeat kinase 2 (LRRK2) gene is of particular importance, with mutations in the coding sequence being the most prevalent known causes of genetic PD and genomic variants at the LRRK2 locus being common risk factors for sporadic PD2. In addition, LRRK2 appears to act upstream of several other PD genes and PD risk factors, such as alpha-synuclein, tau, cyclin G associated kinase (GAK) and RAB7L13, 4. The 144 kb-long LRRK2 gene encodes for the 2527 amino acids long, cytosolic enzyme LRRK2, which functions as a GTPase as well as a kinase. Most of the pathologically important mutations are clustered in the catalytic core of this protein, hinting that altered GTPase and kinase activities may play a crucial role in pathogenesis5, 6. Targeting the LRRK2 signaling pathway is currently regarded as one of the most promising approaches in drug development for PD7,8,9,10.
LRRK2 is a member of the ROCO protein family11. It contains several protein-protein interaction domains, including armadillo (ARM), ankyrin repeats (ANK), leucine-rich repeats (LRR), Ras Of Complex proteins GTPase (ROC), C-terminal Of ROC (COR), a kinase (KIN) and WD4012 (Fig. 1). The multidomain protein is involved in several cellular functions, including autophagy and neurite outgrowth regulation, and is related to some mitochondrial diseases13,14,15. Biochemical experiments suggest that the kinase and GTPase activities of LRRK2 are regulated by dimerization16,17,18,19.
Three other ROCO proteins have been identified in humans: Leucine-rich repeat kinase 1 (LRRK1), death-associated kinase 1 (DAPK1), and malignant fibrous histiocytoma amplified sequence 1 (MFASHI1). LRRK1 is the closest homologue of LRRK2. The domain organization is similar and, like LRRK2, LRRK1 is known to purify as homodimer20. LRRK1 (2015 amino-acids long) lacks the ARM domain present in LRRK2 and, although a C-terminal kinase region is present, has no WD40 domain. Otherwise, the sequence identity and similarity between the domains of the two proteins varies between 14% and 50% (Fig. 1, and supplemental data). Despite this similarity, mutations in LRRK1 have not been linked to PD. This difference has stimulated various studies comparing the functional roles of LRRK1 and LRRK221,22,23.
Much available structural knowledge about LRRK2 comes from the study of related ROCO proteins from lower organisms. So far, crystal structures have been published for the ROC (PDB ID code 3DPT) and ROC-COR (PDB ID code 3DPU) domains of the ROCO protein of the thermophilic bacterium Chlorobium tepidum and the kinase domain (PDB ID code 4F0F) of the ROCO4 protein of the slime mold Dictyostelium discoideum 24,25,26. Although, these structures have advanced our understanding of LRRK2 functions, the inferred functionality of the full-length protein is indirect. The structural properties of individual human LRRK2 domains have also been studied, including the ROC (PDB ID code 2ZEJ)24 and the LRR27 domains. Recently, a low-resolution structure of the 3-flag tagged wild-type LRRK2 dimer was obtained by negative stain transmission electron microscopy (TEM), indicating a compact architecture28. Structural information on LRRK1 is minimal; no 3D structures have been reported, for the full-length protein or fragments thereof.
In this study, we report a buffer optimization for LRRK2 and LRRK1 protein production, using ProteoPlex. ProteoPlex is a screening method based on the Thermofluor® differential scanning fluorimetry assay and can be used to assess the stability of multidomain macromolecular protein complexes in a given buffer system. ProteoPlex uses sparse-matrix screening of a protein’s thermal unfolding behavior under various conditions to find the optimum buffer conditions favoring stable and monodisperse complexes29. Similar methods based on differential scanning fluorimetry (DSF) are routinely employed in X-ray crystallography to optimize the quality and quantity of protein samples for further crystal screening30, but so far have rarely been employed in combination with cryo-electron microscopy (cryo-EM) studies.
In this study, we also report the 16 Å and 25 Å resolution 3D structures of the homodimeric full-length 3xflag-LRRK2 and 3xflag-LRRK1 complexes respectively, determined by cryo-EM. The use of TEM to evaluate protein quality and buffer optimization using differential scanning fluorimetry enabled the optimization of the LRRK protein purifications for the cryo-EM analysis. Both, the 2D analysis of LRRK2 and LRRK1 images, and their 3D models, reveal a striking similarity between the tertiary and quaternary structure of the two protein dimers.
Detergent is required for LRRK2 to remain correctly folded
The production of protein in high yield and purity is a prerequisite for structural analysis by cryo-EM31, 32. Pooling the cell lysate from several Petri dishes and eluting the protein in less volume (see Materials and Methods) resulted in protein concentrations as high as 1 mg/ml for both LRRK2 and LRRK1, regardless of the buffer system used (see below). This concentration was sufficient for initial negative stain TEM imaging, and for cryo-EM if the Quantifoil grids employed were coated with an additional carbon film. Ultra-centrifugal filter devices could not be used to concentrate either protein, because both tended to precipitate and bind to the filter membrane (data not shown).
We evaluated the possibility to perform EM analysis of recombinant LRRK2 in the absence of detergent. For this, purifications of 3xflag-LRRK2 were carried out as detailed in Section 2.1.3, including lysis and wash steps with buffers containing detergent, but with omission of detergent in the final rinse and elution steps. Under these conditions, negative stain TEM of the protein preparations revealed globular particles of various sizes that had no recognizable structure (Fig. 2A). In contrast, a small population of elongated particles with features was observed when 0.02% (v/v) Triton X-100 was included in the elution buffer (Fig. 2B). Protein stability did not increase further when other nonionic detergents were tested; the purity and quality of the eluted protein remained the same, when Triton X-100 was replaced by 0.02% (v/v) n-decyl-β-D-maltopyranoside (DM), NP-30, lauryl maltose neopentyl glycol (LMNG) or Tween 20 (data not shown). Consequently, 0.02% (v/v) Triton X-100 was included in all buffers used to elute 3xflag-LRRK2 and 3xflag-LRRK1 for EM experiments.
Silver stain gels showed that the purified LRRK2 and LRRK1 samples were pure (Fig. 3). However, images of purified LRRK2 showed a very heterogeneous mixture, even though detergent was present (Fig. 4A, left panel). Compared to LRRK2, negative stain TEM images of pure LRRK1 were slightly less heterogeneous and revealed a large population of similarly sized particles (Fig. 4B). This prompted us to perform buffer optimization experiments, in order to identify buffers that reduce particle heterogeneity.
Buffer optimization by ProteoPlex screening
Three ProteoPlex assays29 were performed to define (i) the optimal buffer conditions and (ii) the effect of buffer ligands/additives for the stability of affinity-bound 3xflag-LRRK2 protein, which correlates to the optimal lysis/binding buffer for the purification and (iii) the optimal buffer conditions for the elution of affinity-bound 3xflag-LRRK2. For assay (i), purified protein loaded to affinity resin was prepared and submitted to ProteoPlex analysis as described in Materials and Methods. In assay (i), substantial peaks indicating protein unfolding or aggregation were detected with many buffers in the temperature range between 20 and 40 °C. Hepes at pH 6.8 proved to be the most favorable buffer (Supplementary Figure S1). In assay (ii), subsequent screening of 88 different buffer ligands/additives with 3xflag-LRRK2 purified with lysis, wash and rinse buffers in which Tris pH 7.5 was replaced by Hepes at pH 6.8 and still bound to the affinity beads. Screen (ii) showed that CaCl2, MgCl2, NH4Cl, gluthathion (oxidized and reduced), ethylene glycol, trehalose, and glycerol had a stabilizing effect on the protein (Supplementary Figure S2). As a result, subsequent purifications were carried out using the adapted buffer system, 20 mM Hepes pH 6.8, 10 mM CaCl2, 5 mM MgCl2, 100 mM NH4Cl, 1% (v/v) Triton X-100, 5% (v/v) glycerol. Protein purified with this buffer for the lysis and wash steps was used in assay (iii) performed to find the best elution conditions. As described in Materials and Methods, the affinity bound protein was first rinsed in test elution buffers (effectively removing Triton X-100 and glycerol). In this elution buffer screen, Hepes at pH 8.2 was the most favorable buffer (Supplementary Figure S3). Therefore, we adapted the elution buffer composition for 3xflag-LRRK2 to 20 mM Hepes pH 8.2, 100 mM NH4Cl, 5 mM MgCl2, 10 mM CaCl2, and 0.02% Triton X-100.
The overall result of the ProteoPlex assays is summarized in Fig. 4C, where the melting curves of 3xflag-LRRK2 in the initial (based on Tris pH 7.5, see Materials and Methods) and adapted buffer systems (based in Hepes 6.8 in the lysis and wash buffers and Hepes 8.2 in the elution buffer, see above) are superimposed showing the clear two-state melting curve for the adapted condition. Although, the yield of a new LRRK2 purification carried out using the adapted buffers, HEPES buffer at pH 6.8, for cell lysis and protein extraction by affinity binding, and HEPES buffer at pH 8.2 to elute it from the affinity column, was comparable to the yield of control purifications carried out under the initial conditions with Tris/HCl buffers, the sample was of higher quality. Indeed, negative stain TEM images revealed a larger population of intact complexes, and the background was much cleaner with fewer aggregates (Fig. 4A, right). These adapted purification conditions were, therefore used to purify 3xflag-LRRK2 for cryo-EM analysis.
Cryo-EM of LRRK2
3xflag-LRRK2 protein purified with optimized lysis, wash and elution buffers (see above) was applied to glow-discharged thin (5 nm) carbon films supported by holy carbon Quantifoil grids, vitrified and imaged as described in Materials and Methods. A thin carbon support film was essential, even though it can influence protein orientation, add additional noise and impair CTF correction. In its absence, proteins were only present on the thick carbon mesh, none were found in the vitreous ice spanning the holes; neither increasing the protein concentration tenfold, nor using Lacey grids, which have mesh-like openings of different sizes and shapes, helped (Supplementary Figure S4).
Elongated particles with two-fold symmetry could be distinguished in the raw micrographs of 3-flag-LRRK2 cryo-EM preparations (Fig. 5A). To obtain a 3D model, 15′352 particles were selected from the 279 micrographs recorded and subjected to reference free alignment and classification as detailed in the Materials and Methods. The 128 class averages generated (Supplementary Figure S5A) show that the LRRK2 complexes were randomly oriented on the grid and reveal a high degree of flexibility; preferential orientation due to the presence of a continuous carbon film was not detected. Side-views of the particles are very characteristic, being ~17 nm-long, ~10 nm-wide with a clear 2-fold symmetry, suggesting that the complex is a dimer (Fig. 5A). The dimensions are similar to previous estimates20. The two 3-flag-LRRK2 monomers interact at both ends of their protein cores, which are aligned in parallel and seem to form a small cavity. The ends of the complex are less distinct, indicating that these domains have intrinsic flexibility. To validate the analysis, the same dataset was also processed with the RELION software package33, which uses a Bayesian approach to infer the parameters of a statistical model from the data. The resulting class averages are very similar to those obtained using EMAN2 (Supplementary Figure S5B).
Cryo-EM of LRRK1
3xflag-LRRK1 protein purified as described in Materials and Methods was analyzed according to the same procedure. To obtain a 3D model, 5′363 particles were selected from 55 micrographs, aligned without the use of a reference and classified into 64 classes containing a minimum of 100 particles each, using EMAN2 (Fig. 5B). Due to the lower number of particles per class, the averages obtained look less crisp as their LRRK2 counterparts, but the characteristic side-views are clearly visible (Fig. 5B). These side views show that LRRK1 forms a dimer that is very similar to the LRRK2 dimer, but slightly smaller. As might be expected from the two sequences (Fig. 1), the protrusions at the ends of the LRRK1 complex are less prominent.
3D Reconstruction of LRRK2 and LRRK1
The initial 3D models generated for both LRRK2 and LRRK1 using spacegroups C1 (no symmetry) and C2 (two-fold symmetry), respectively, were in good agreement, which was also evident from the dimeric shape of the 2D class averages (Fig. 5). Using the respective initial model as reference, iterative projection-matching reconstruction was applied without imposing any symmetry. After three rounds of refinement, the final reconstruction was produced at a resolution of 24.2 Å and 24.3 Å for 3xflag-LRRK2 and 3xflag-LRRK1, respectively (Supplementary Figure S6).
The overall shape of the LRRK2 and LRRK1 complexes is similar (Fig. 6). In both cases, the central regions of the two monomers form an elliptical homodimer with what appears to be a central cavity (Fig. 6C). However, as this region of the monomer is slightly more curved for the LRRK2 dimer, the cavity is smaller. Two dimerization contacts are visible in both low-resolution maps. These contacts are at roughly equal distances from the center of the complex, towards the N and the C terminal, respectively. At this resolution, it was not possible to assign and fit domains to the EM density. However, the two-fold symmetric arrangement of the two monomers is evident in the non-symmetrized reconstructions, and the symmetry axis of the C2 symmetric complex is in the direction of the longer axis of the molecule, which is vertical in Figs 6 and 7. This symmetry axis is also apparent in the 2D class averages, shown in Fig. 5. The 3D reconstructions also show the central protein region, which is common to both LRRK2 and LRRK1, to form a small cavity in the dimer. We tentatively interpret this region as the catalytic core of the complex comprised of the ROC-COR-kinase domains found in both proteins.
To increase the resolution and address conformational heterogeneity in the data, a bigger dataset for LRRK2 was recorded by cryo-EM. A total of 279 micrographs of LRRK2 were collected which yielded a total of 15′352 particles, out of which only 8′239 particles were retained after 2D classification in RELION. These particles were used to perform 3D classification in RELION using four classes with C2 symmetry. The resulting 3D structures of four classes were similar with roughly equal number of particles. The best class, which represented 27.2% of the total particles, resulted in an EM density map at 16.2 Å resolution (Fig. 7). The resolution was calculated based on the spectral signal-to-noise ratio curve (SSNR) (Supplementary Figure S7). Via this higher resolution EM density map, the 3D model of LRRK2 revealed an antiparallel arrangement of the LRRK2 protomers in the homodimer as well as information on which domains interact which each other. The extra density protruding from each trans end of the dimer can be attributed to the N-terminal ARM domain while the WD40 domain is likely associated with either ANK or LRR domain to form a dimer. Based on our EM model, we propose a model for the domain arrangement of LRRK2 and LRRK1, showing antiparallel dimers with suggested domains extending beyond the dimer core (Fig. 8).
The determination of the full-length structure of both LRRK2 and LRRK1 is an important goal to further our understanding of the molecular mechanisms underpinning functions of LRRK proteins. Also, given that LRRK2 is a key player in the pathogenesis of Parkinson’s disease while LRRK1 is not, the comparison of structures of both LRRK proteins may yield clues to LRRK2’s pathological functions and aid in designing novel LRRK2 targeting therapeutics. Our study worked on two aspects, the improvement of protein quality for structural analysis and performing single particle analysis cryo-EM. Buffer screening and calculating associated thermal shift assays using ProteoPlex revealed that LRRK2 favors a higher pH to be stably and correctly folded in solution. It should be noted that the pH of most of negative stain used routinely in EM for structural analysis is either acidic or neutral, e.g., uranyl formate is acidic with a pH ~ 434. Although it has been shown that the fixation rate is very rapid and the low pH usually does not affect the overall protein conformations, a possible effect of the acidic stain on the protein state cannot be ruled out completely, especially for pH-sensitive protein complexes. As observed in comparing Figs 4 and 5, the raw LRRK2 and LRRK1 particles in negative stain micrographs displayed a different visual aspect compared to the cryo-EM micrographs, owing to low pH exerted by negative stain on LRRKs.
Taking into account the potential effect of negative staining on the LRRK structures, we used unstained cryo-EM to collect structural data for LRRK2 and LRRK1. The generated 3D maps show full-length 16 and 25 Å resolution structures of LRRK2 and LRRK1, respectively, revealing the overall shape of the dimers that is closely similar between the two proteins. Our study presents the first 3D of the full-length human LRRK1 dimer structure and provides additional structural details to the recent report of the LRRK2 dimer structure based on a negative stain EM28. Comparing the structure reported in Guaitoli et al.28 with the LRRK2 structure presented here, both structures show dimer particles of similar size, and both dimers show tightly packed domains with dimerization occurring over a single twofold rotation axis. Also, both structures are compatible with a model in which the LRRK2 ARM domain extends outside of the LRRK2 dimer core (Figs 6 and 7), a finding corroborated by the low level of cross-linking observed between the ARM domain and other LRRK2 domains28. In contrast, the slightly higher resolution LRRK2 structure in our study (16 Å in Fig. 7 vs. 22 Å in ref. 28) reveals additional details, in particular that the homodimer protomers are arranged in two-fold symmetric orientation forming an elongated cavity, and that the ARM domain curves away from the dimer core instead of extending along the dimer axis. As noted above, these discrepancies may be due to the use of a buffer specifically optimized here for structural biology analysis of LRRK2 in solution, the use of the cryo-EM technique that maintains complexes in a 3D matrix rather than 2D matrix for negative stain techniques and/or the improved resolution of the structure obtained in the present study.
At the resolutions obtained here for the LRRK2 and LRRK1 structures, fitting of domains in the EM density maps is not possible. However the arrangement of the protomers in the LRRK2 and LRRK1 dimers can be inferred indirectly. The protomers in both the complexes arrange in a two-fold symmetric orientation where the C-terminal kinase and WD40 domains of one protomer interact with N-terminal ankyrin and LRR domains of the other. The symmetric orientation of the LRRK2 protomers is consistent with other observations including that LRRK2 autophosphorylates itself primarily in the ROC domain. Indeed, the ROC domain of one protomer would in this instance be accessible to the kinase domain of the second protomer, although intramolecular ROC phosphorylation is not excluded17. Interestingly, the cavity formed within the dimer provides additional space for flexibility of the LRRK proteins and may play a role in dynamic interactions between functional domains. Another feature of the LRRK2 and LRRK1 models is that large surface areas of the proteins remain available for further interactions. For instance, binding interfaces of specific domains are known to be mapped to specific domains such as p21-activated kinase 6 (PAK6) and tubulin to ROC, heat shock protein 90 (HSP90) to Kinase, or N-ethylmaleimide sensitive fusion (NSF) to WD4035,36,37,38.
Interestingly, the striking similarity on the overall structures of LRRK2 and LRRK1 suggests that the specificity of LRRK2 versus LRRK1 in its role in Parkinson’s disease must be sought at another level. A first hypothesis is that LRRK2’s specificity is largely mediated by its N-terminal domain that is shown here to be located on the fringe of the LRRK2 dimer core (Figs 6 and 7 and ref. 28). Alternatively, structural subtleties may be present within the respective dimer cores of LRRK2 and LRRK1 responsible for differences in the regulation of its biochemical functions or of its protein-protein interactions. Finally, based on the high structural variability observed here, it should be noted that the LRRK2 and LRRK1 models presented constitute only one of several conformations of these proteins. Several studies have for instance suggested that dimerization may influence the GTPase and kinase functions39, indicating that different dimer conformations may lie at the basis of these functional differences.
The work presented here lays the foundations for further exploration into LRRK structural biology. For instance, a major question is whether the overall LRRK2 structure is affected by disease-causing mutations. At the biochemical level, several studies have reported that LRRK2 disease mutations, particularly mutations in the ROC and COR domains, can affect dimerization16, 17, 40. Work in this area has also shown that disease mutations can affect interactions between LRRK2 domains without affecting overall dimerization, suggesting that the overall dimer structure is likely to be affected16, 40. Another issue to address at the structural level is the intramolecular regulation of LRRK2 functions. For instance, LRRK2 kinase activity requires the LRRK2 ROC domain but is not dependent on ROC’s GTP binding activity per se41. In addition, it is as yet unclear what effect LRRK2 autophosphorylation has on LRRK2 function. While autophosphorylation is not easily detected in vivo, at least 1 phosphorylation site S1292 is found with increased phosphorylation levels in cellular and animal models based on the LRRK2 mutant G2019S. In addition, phosphorylation of this site is increased in urinary exosomes of both LRRK2 G2019S carrying and sporadic PD patients42.
In conclusion, we present a comparative cryo-EM-based insight into the 3D structures of full length LRRK2 and LRRK1. Our results reveal that LRRK2 is stabilized in solution by high pH buffers and that both LRRK2 and LRRK1 display similar, compact two-fold symmetric dimer structures with the particularity for LRRK2 that its N-terminal ARM domain extends outside of the dimer core. This work will further assist follow-up work towards high-resolution structures of these important molecules.
Materials and Methods
Protein expression and purification
Constructs for the mammalian expression of 3xflag-LRRK2 and 3xflag-LRRK1 included the pCHMWS-3xFLAG-LRRK2 and pCHMWS-3xFLAG-LRRK1 constructs, described previously16, 20, as well as the p3xFLAG-CMV-10-LRRK2 construct (a generous gift from Prof. Takeshi Iwatsubo) described in ref. 43.
Cell culture and transfection
HEK293FT cells (Life Technologies) were cultured in 15 cm Corning petri dishes (Sigma), at 37 °C in an atmosphere containing 5% CO2. The culture medium was comprised of Dulbecco’s Modified Eagle’s Medium (DMEM), 10% fetal bovine serum, 0.1 mM MEM nonessential amino acids (NEAA), 2 mM L-glutamax and 1 mM MEM sodium pyruvate. One day prior to transfection, ~12.105 cells were plated out on a single 15 cm petri dish. The next day, cells were transfected with 30 μg of plasmid (3xFLAG-LRRK2 or 3xFLAG-LRRK1) complexed with polyethyleneimine solution (PEI, 1 mg/ml, pH 7.0). To verify the efficacy of the transfection, a transfection with GFP plasmid was performed in parallel as a control. The proportion of cells transfected was monitored by fluorescence microscopy and the experiment was only continued for transfection rates greater than 50%.
Protein purification was performed essentially as described previously4, 20. Forty-eight hours after transfection with the 3xFLAG-LRRK2 and 3xFLAG-LRRK1 constructs, the cells were rinsed with phosphate-buffered saline (PBS) and lysed in 1 mL lysis buffer (lysis buffer composition: 20 mM Tris/HCl, pH 7.5, 150 mM NaCl, 1 mM EDTA, 1% (v/v) Triton X-100, 10% (v/v) glycerol and protease inhibitor cocktail (Sigma), or the optimal composition indicated by ProteoPlex, as detailed in the Results section), on ice, for 10 min. The collected lysate was centrifuged at 4 °C for 10 min at 20,000 g to remove cell debris. The clear supernatant was incubated overnight at 4 °C on a rotator mixer (STARLAB, Germany) with anti-Flag M2 agarose beads (Sigma-Aldrich) that had previously been equilibrated with lysis buffer. Afterwards, the beads were washed four times at 4 °C with wash buffer (25 mM Tris/HCl pH 7.5, 400 mM NaCl, 1% (v/v) Triton X-100 or the optimal lysis/binding buffer indicated by ProteoPlex). Proteins prepared for testing in ProteoPlex assays were stored in storage buffer (i.e., 20 mM Tris/HCl pH 7.4, 200 mM NaCl, 5 mM MgCl2 1 mM DTT, 0.02% (v/v) Triton X-100, 50% (v/v) glycerol or the optimal lysis/binding buffer determined by the preceding ProteoPlex screen supplemented with 50% (v/v) glycerol) with 3xflag-LRRK2 still bound, at 4 °C until use. For EM analysis, the affinity-bound 3xflag-LRRK2 or 3xflag-LRRK1 protein was eluted by adding 5 volumes of elution buffer containing 100 μg/ml of 3X FLAG® peptide (Sigma) and rotating the mixture on a wheel at 4 °C for 30 minutes (STARLAB, Germany). The composition of the elution buffer was 20 mM Tris/HCl pH 7.4, 200 mM NaCl, 5 mM MgCl2 1 mM DTT, 0.02% (v/v) Triton X-100, or the optimal composition indicated by ProteoPlex (see Results section). The beads were then spun down at 400 g for 2 minutes and supernatant containing the eluted protein was collected. EM-grids holding the purified protein were prepared straight away.
Radiometric nucleotide binding assay
To assess GDP/GTP binding capacity of purified 3xFLAG-LRRK1 and 3xFLAG-LRRK2, affinity resin bound protein was prepared as described under protein purification, rinsed in guanine nucleotide binding buffer (Tris 25 mM pH 7.5, NaCl 150 mM, EDTA 5 mM, Triton 0.02%) and incubated with radioactively labelled GTP (GTP-α-33P), in the presence or absence of 200 µM ‘cold’ nucleotides (GDP and GTP) at room temperature. Excess nucleotides were then removed by rinsing beads 3 times in nucleotide wash buffer (Tris 25 mM pH 7.5, MgCl2 10 mM, dithiothreitol (DTT) 2 mM, Triton 0.02%, beta-glycerophosphate 5 mM, Na3VO4 0.1 mM). Bound GTP-α-33P was measured via scintillation counting and values of the different test conditions were normalized to the binding condition without cold nucleotides.
Buffer optimization by ProteoPlex screening
The ProteoPlex screening method based on the Thermofluor® differential scanning fluorimetry assay, was used to assess the stability of the multidomain 3xflag-LRRK2 complexes in different buffer and additive systems. Conditions that resulted in thermal protein unfolding transitions closest to two state unfolding (i.e., unfolding from the native to the unfolded state, without the formation of metastable intermediates) were considered optimal, as they indicate monodispersity and increased stability of macromolecular complexes29. It should be noted that the ProteoPlex assays were performed with protein in the absence of Triton X-100 as it interferes with the assay signal.
ProteoPlex assays of (i) 88 buffers and (ii) 88 buffer ligands/additives were performed in 96-well plates as given in ref. 29 to determine the optimal conditions for the stability of 3xflag-LRRK2 bound to the affinity beads (i.e., the optimum lysis/binding buffer). Flag-M2 agarose beads loaded with 3xflag-LRRK2 in storage buffer as described above (see above), were rinsed at 4 °C. The rinse buffer for (i), the buffer screen, was 20 mM Tris/HCl pH 7.4, 200 mM NaCl, 5 mM MgCl2, 1 mM DTT. The rinse buffer for (ii), the ligand/additive screen, was the same composition as (i) with the replacement of Tris by the optimal buffer determined from the buffer screen (Hepes pH 6.8, see Results section) at 4 °C, The rinsed beads were immediately aliquoted (16 µl aliquots) and tested by addition of 2 µl of ProteoPlex ×88 buffers (or ×88 ligands) screens at 4 °C. Then 2 µl SYPRO® Orange (Sigma Aldrich) was added to each aliquot and melting curves (i.e., state transition graphs) were recorded for each condition to assess the stability of the bound protein.
To determine optimal buffer for eluting LRRK2 from affinity beads, flag-M2 agarose beads binding LRRK2 were washed 3 times with 3 beads volumes of the optimal binding buffer (HEPES pH 6.8, 5 mM MgCl2, 100 mM NH4Cl, 5% (v/v) Ethylen Glycol and 10 mM CaCl2) and spun down over 1 minute at 4 °C and the supernatant discarded resulting in the same initial beads volume (600 µl). Aliquots (24×) were deposited in a transparent well plate and rinsed in the ProteoPlex assay buffers (sodium citrate, HEPES or Tris buffers with pHs ranging from 5.5 to 9) finally leaving a 25 µl aliquot at 4 °C. 3xflag-LRRK2 protein was eluted at 4 °C by the addition of 1 µl 3X FLAG® peptide to each well (to 100 µg/ml). After 30 minutes the beads were sedimented using a table top centrifuge for 1 minute at 2500 rpm at 4 °C, and 18 µl of supernatant containing eluted 3xflag-LRRK2 protein were collected. 2 µl of SYPRO® Orange dye was added to each supernatant following the ProteoPlex protocol and melting curves were recorded for each buffer condition. The curves were visually assessed, as the signals were too weak to carry out the standard ProteoPlex automated analysis described in ref. 29. Again, the buffer conditions displaying thermal unfolding transitions closest to a two state unfolding, that are known to be indicative of monodispersity and stability of macromolecular complexes29, were used to adapt the LRRK2 elution buffer, as indicated in the Results section.
For negative stain transmission electron microscopy (TEM), 3.5 µl of purified protein sample was pipetted onto a glow-discharged, carbon-coated copper grid and left to adsorb for 1 minute. The grid was then washed on three droplets of milliQ water, and subsequently stained on two droplets of 2% uranyl acetate (1 minute per drop), blotting between each step. Grids were scanned using a Philips CM10 TEM (FEI Company, Eindhoven, The Netherlands) operated at 80 kV under low-dose conditions (20 electrons/Å2). Images were collected at a nominal magnification of 96,000x with defocus values varying between −0.5 to −1.5 µm and recorded by a 2 K Veleta side-mounted TEM CCD camera (Olympus), corresponding to a pixel size of 3.8 Å at the specimen level.
For cryo-EM, 3.5 µl of purified protein sample was pipetted onto a glow-discharged, holey carbon film (Quantifoil R2/2, Quantifoil Micro Tools, Jena, Germany) with an additional thin layer of carbon, and left to adsorb for 1 minute. The grids were then rapidly plunge-frozen in liquid ethane cooled by liquid nitrogen, using a MarkIV Vitrobot (FEI, Eindhoven, Netherlands). The time between elution of purified LRRK2 or LRRK1 and cryo-EM grid preparation was kept to a minimum (60 minutes). The frozen grids were transferred to a Gatan-626 cryo-holder. Micrographs were recorded under low-dose conditions (25 electrons/Å2) using a CM200 TEM (FEI Company, Eindhoven, The Netherlands) equipped with a TVIPS F416 CMOS camera (TVIPS, Gauting, Germany). The microscope was operated at 200 kV and a nominal magnification of 58,000x. The defocus ranged from −1 to −2.5 µm, corresponding to a pixel size of 2.7 Å at the specimen level.
The EMAN2 software suite43 was initially used. Particles, i.e., images of single LRRK2 or LRRK1 complexes, were extracted from the negative stain TEM or cryo-EM micrographs using the e2boxer interactive procedure. Contrast transfer function (CTF) correction was accomplished by producing high-pass filtered and phase-flipped particles, using the e2ctf program. Reference-free class averages were generated using the e2refine2d program, requesting the generation of 128 classes with a maximum of 100 particles per class. The e2initialmodel utility was employed to generate initial models from the best 2D class averages (10 in all), without and with imposed C2 symmetry. The final 3D maps were refined using the standard iterative projection matching, class-averaging and Fourier reconstruction procedure of EMAN2. The resolution of each reconstruction was determined by the gold standard Fourier shell correlation criterion. UCSF Chimera44 was employed to visualize and analyze the final maps.
In addition, the RELION software33 was employed to generate 2D class averages of the same particles and obtain a 3D model for comparison. After CTF correction in EMAN2, the newly incorporated e2refinetorelion2d EMAN2 functionality45 was used to export the particles to RELION and run 25 rounds of 2D reference-free class refinement with 128 classes in total, finishing with an angular sampling of 1.875 degrees translational sampling of 0.5 pixels. To generate an initial model in RELION, a 3D classification was performed with only one class and C1 symmetry, using a sphere as the initial reference and all the selected particles from the 2D classification. After 50 iterations, an initial consensus model with a spectral signal-to-noise ratio (SSNR) below 1.0 at 19.2 Å was obtained. Using this consensus model as reference, 3D classification was performed using four classes with C2 symmetry. Initially, 50 iterations were performed with a Tau factor of 3.6 and a sampling of, respectively, 7.5 degrees and 1 pixel. Afterwards, an additional 25 steps were performed using an angular step of 1.9 degrees.
Lees, A. J., Hardy, J. & Revesz, T. Parkinson’s disease. Lancet 373, 2055–2066, doi:10.1016/S0140-6736(09)60492-X (2009).
Hernandez, D. G., Reed, X. & Singleton, A. B. Genetics in Parkinson disease: Mendelian versus non-Mendelian inheritance. J. Neurochem. 139(Suppl 1), 59–74, doi:10.1111/jnc.13593 (2016).
Cookson, M. R. LRRK2 Pathways Leading to Neurodegeneration. Current Neurology and neuroscience reports 15, 42, doi:10.1007/s11910-015-0564-y (2015).
Taymans, J. M. & Cookson, M. R. Mechanisms in dominant parkinsonism: The toxic triangle of LRRK2, alpha-synuclein, and tau. BioEssays: News and Reviews in Molecular, Cellular and Developmental Biology 32, 227–235, doi:10.1002/bies.200900163 (2010).
Bekris, L. M., Mata, I. F. & Zabetian, C. P. The genetics of Parkinson disease. Journal of Geriatric Psychiatry and Neurology 23, 228–242, doi:10.1177/0891988710383572 (2010).
Zimprich, A. et al. Mutations in LRRK2 cause autosomal-dominant parkinsonism with pleomorphic pathology. Neuron 44, 601–607, doi:10.1016/j.neuron.2004.11.005 (2004).
Chan, S. L., Angeles, D. C. & Tan, E. K. Targeting leucine-rich repeat kinase 2 in Parkinson’s disease. Expert Opinion on Therapeutic Targets 17, 1471–1482, doi:10.1517/14728222.2013.842978 (2013).
Deng, X. et al. Characterization of a selective inhibitor of the Parkinson’s disease kinase LRRK2. Nature Chemical Biology 7, 203–205, doi:10.1038/nchembio.538 (2011).
Lee, B. D., Dawson, V. L. & Dawson, T. M. Leucine-rich repeat kinase 2 (LRRK2) as a potential therapeutic target in Parkinson’s disease. Trends in Pharmacological Sciences 33, 365–373, doi:10.1016/j.tips.2012.04.001 (2012).
Taymans, J. M. & Greggio, E. LRRK2 Kinase Inhibition as a Therapeutic Strategy for Parkinson’s Disease, Where Do We Stand? Current Neuropharmacology 14, 214–225 (2016).
Bosgraaf, L. & Van Haastert, P. J. Roc, a Ras/GTPase domain in complex proteins. Biochimica et Biophysica Acta 1643, 5–10 (2003).
Mills, R. D., Mulhern, T. D., Liu, F., Culvenor, J. G. & Cheng, H. C. Prediction of the repeat domain structures and impact of parkinsonism-associated variations on structure and function of all functional domains of leucine-rich repeat kinase 2 (LRRK2). Human Mutation 35, 395–412, doi:10.1002/humu.22515 (2014).
Cherra, S. J. 3rd, Steer, E., Gusdon, A. M., Kiselyov, K. & Chu, C. T. Mutant LRRK2 elicits calcium imbalance and depletion of dendritic mitochondria in neurons. The American Journal of Pathology 182, 474–484, doi:10.1016/j.ajpath.2012.10.027 (2013).
Gomez-Suaga, P. et al. Leucine-rich repeat kinase 2 regulates autophagy through a calcium-dependent pathway involving NAADP. Human Molecular Genetics 21, 511–525, doi:10.1093/hmg/ddr481 (2012).
MacLeod, D. et al. The familial Parkinsonism gene LRRK2 regulates neurite process morphology. Neuron 52, 587–593, doi:10.1016/j.neuron.2006.10.008 (2006).
Daniels, V. et al. Insight into the mode of action of the LRRK2 Y1699C pathogenic mutant. Journal of Neurochemistry 116, 304–315, doi:10.1111/j.1471-4159.2010.07105.x (2011).
Greggio, E. et al. The Parkinson disease-associated leucine-rich repeat kinase 2 (LRRK2) is a dimer that undergoes intramolecular autophosphorylation. The Journal of biological chemistry 283, 16906–16914, doi:10.1074/jbc.M708718200 (2008).
Sen, S., Webber, P. J. & West, A. B. Dependence of leucine-rich repeat kinase 2 (LRRK2) kinase activity on dimerization. The Journal of Biological Chemistry 284, 36346–36356, doi:10.1074/jbc.M109.025437 (2009).
Taymans, J. M. The GTPase function of LRRK2. Biochemical Society Transactions 40, 1063–1069, doi:10.1042/BST20120133 (2012).
Civiero, L. et al. Biochemical characterization of highly purified leucine-rich repeat kinases 1 and 2 demonstrates formation of homodimers. PLoS ONE 7, e43472, doi:10.1371/journal.pone.0043472 (2012).
Civiero, L. & Bubacco, L. Human leucine-rich repeat kinase 1 and 2: intersecting or unrelated functions? Biochemical Society Transactions 40, 1095–1101, doi:10.1042/BST20120123 (2012).
Reyniers, L. et al. Differential protein-protein interactions of LRRK1 and LRRK2 indicate roles in distinct cellular signaling pathways. Journal of Neurochemistry 131, 239–250, doi:10.1111/jnc.12798 (2014).
Taylor, J. P. et al. Leucine-rich repeat kinase 1: a paralog of LRRK2 and a candidate gene for Parkinson’s disease. Neurogenetics 8, 95–102, doi:10.1007/s10048-006-0075-8 (2007).
Deng, J. et al. Structure of the ROC domain from the Parkinson’s disease-associated leucine-rich repeat kinase 2 reveals a dimeric GTPase. Proceedings of the National Academy of Sciences of the United States of America 105, 1499–1504, doi:10.1073/pnas.0709098105 (2008).
Gilsbach, B. K. et al. Roco kinase structures give insights into the mechanism of Parkinson disease-related leucine-rich-repeat kinase 2 mutations. Proceedings of the National Academy of Sciences of the United States of America 109, 10322–10327, doi:10.1073/pnas.1203223109 (2012).
Gotthardt, K., Weyand, M., Kortholt, A., Van Haastert, P. J. & Wittinghofer, A. Structure of the Roc-COR domain tandem of C. tepidum, a prokaryotic homologue of the human LRRK2 Parkinson kinase. The EMBO Journal 27, 2239–2249, doi:10.1038/emboj.2008.150 (2008).
Vancraenenbroeck, R. et al. Expression, purification and preliminary biochemical and structural characterization of the leucine rich repeat namesake domain of leucine rich repeat kinase 2. Biochimica et Biophysica Acta 1824, 450–460, doi:10.1016/j.bbapap.2011.12.009 (2012).
Guaitoli, G. et al. Structural model of the dimeric Parkinson’s protein LRRK2 reveals a compact architecture involving distant interdomain contacts. Proceedings of the National Academy of Sciences of the United States of America 113, E4357–4366, doi:10.1073/pnas.1523708113 (2016).
Chari, A. et al. ProteoPlex: stability optimization of macromolecular complexes by sparse-matrix screening of chemical space. Nature Methods 12, 859–865, doi:10.1038/nmeth.3493 (2015).
Reinhard, L., Mayerhofer, H., Geerlof, A., Mueller-Dieckmann, J. & Weiss, M. S. Optimization of protein buffer cocktails using Thermofluor. Acta Crystallographica. Section F, Structural biology and crystallization communications 69, 209–214, doi:10.1107/S1744309112051858 (2013).
Glaeser, R. M. How good can cryo-EM become? Nature Methods 13, 28–32, doi:10.1038/nmeth.3695 (2016).
Dubochet, J. et al. Cryo-electron microscopy of vitrified specimens. Quarterly Review of Biophysics 21, 129–228 (1988).
Scheres, S. H. RELION: implementation of a Bayesian approach to cryo-EM structure determination. J. Struct. Biol. 180, 519–530, doi:10.1016/j.jsb.2012.09.006 S1047-8477(12)00248-1 [pii] (2012).
Bremer, A., Henn, C., Engel, A., Baumeister, W. & Aebi, U. Has negative staining still a place in biomacromolecular electron microscopy? Ultramicroscopy 46, 85–111 (1992).
Piccoli, G. et al. Leucine-rich repeat kinase 2 binds to neuronal vesicles through protein interactions mediated by its C-terminal WD40 domain. Molecular and Cellular Biology 34, 2147–2161, doi:10.1128/MCB.00914-13 (2014).
Civiero, L. et al. Leucine-rich repeat kinase 2 interacts with p21-activated kinase 6 to control neurite complexity in mammalian brain. Journal of Neurochemistry 135, 1242–1256, doi:10.1111/jnc.13369 (2015).
Wang, L. et al. The chaperone activity of heat shock protein 90 is critical for maintaining the stability of leucine-rich repeat kinase 2. The Journal of Neuroscience: the official journal of the Society for Neuroscience 28, 3384–3391, doi:10.1523/JNEUROSCI.0185-08.2008 (2008).
Law, B. M. et al. A direct interaction between leucine-rich repeat kinase 2 and specific beta-tubulin isoforms regulates tubulin acetylation. The Journal of Biological chemistry 289, 895–908, doi:10.1074/jbc.M113.507913 (2014).
Rudi, K. et al. Conformational heterogeneity of the Roc domains in C. tepidum Roc-COR and implications for human LRRK2 Parkinson mutations. Bioscience Reports 35, doi:10.1042/BSR20150128 (2015).
Klein, C. L. et al. Homo- and heterodimerization of ROCO kinases: LRRK2 kinase inhibition by the LRRK2 ROCO fragment. Journal of Neurochemistry 111, 703–715, doi:10.1111/j.1471-4159.2009.06358.x (2009).
Taymans, J. M. et al. LRRK2 kinase activity is dependent on LRRK2 GTP binding capacity but independent of LRRK2 GTP binding. PloS one 6, e23207, doi:10.1371/journal.pone.0023207 (2011).
Fraser, K. B., Moehle, M. S., Alcalay, R. N., West, A. B. & Consortium, L. C. Urinary LRRK2 phosphorylation predicts parkinsonian phenotypes in G2019S LRRK2 carriers. Neurology 86, 994–999, doi:10.1212/WNL.0000000000002436 (2016).
Tang, G. et al. EMAN2: an extensible image processing suite for electron microscopy. J. Struct. Biol. 157, 38–46, doi:10.1016/j.jsb.2006.05.009 (2007).
Pettersen, E. F. et al. UCSF Chimera–a visualization system for exploratory research and analysis. J Comput Chem 25, 1605–1612, doi:10.1002/jcc.20084 (2004).
Bell, J. M., Chen, M., Baldwin, P. R. & Ludtke, S. J. High resolution single particle refinement in EMAN2.1. Methods 100, 25–34, doi:10.1016/j.ymeth.2016.02.018 (2016).
We acknowledge technical assistance of K. Goldie. We thank Shirley A. Müller for insightful discussions and critically reading of the paper. This work was supported by the Swiss National Science Foundation (SNF CRSII3_154461, 315230_146929, the NCCR TransCure), the FWO Vlaanderen, the researcher attraction program of the Nord Pas-de-Calais Region (currently Hauts de France Region, France, Individual fellowship to J.-M.T.). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 659183 (Marie Sklodowska-Curie individual fellowship to J.-M.T., project RECOLOR).
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Sejwal, K., Chami, M., Rémigy, H. et al. Cryo-EM analysis of homodimeric full-length LRRK2 and LRRK1 protein complexes. Sci Rep 7, 8667 (2017). https://doi.org/10.1038/s41598-017-09126-z
WDR37 syndrome: identification of a distinct new cluster of disease-associated variants and functional analyses of mutant proteins
Human Genetics (2021)
Scientific Reports (2020)