Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Satellite-based time-series of sea-surface temperature since 1981 for climate applications


A climate data record of global sea surface temperature (SST) spanning 1981–2016 has been developed from 4 × 1012 satellite measurements of thermal infra-red radiance. The spatial area represented by pixel SST estimates is between 1 km2 and 45 km2. The mean density of good-quality observations is 13 km−2 yr−1. SST uncertainty is evaluated per datum, the median uncertainty for pixel SSTs being 0.18 K. Multi-annual observational stability relative to drifting buoy measurements is within 0.003 K yr−1 of zero with high confidence, despite maximal independence from in situ SSTs over the latter two decades of the record. Data are provided at native resolution, gridded at 0.05° latitude-longitude resolution (individual sensors), and aggregated and gap-filled on a daily 0.05° grid. Skin SSTs, depth-adjusted SSTs de-aliased with respect to the diurnal cycle, and SST anomalies are provided. Target applications of the dataset include: climate and ocean model evaluation; quantification of marine change and variability (including marine heatwaves); climate and ocean-atmosphere processes; and specific applications in ocean ecology, oceanography and geophysics.

Measurement(s) temperature of water
Technology Type(s) satellite imaging
Factor Type(s) time • geographic location
Sample Characteristic - Environment sea
Sample Characteristic - Location Earth (planet)

Machine-accessible metadata file describing the reported data:

Background & Summary

Sea surface temperature (SST) is an “essential climate variable1”. Applications of SST data include the evaluation of climate and ocean models, observational quantification of climate change and variability, process understanding and parameterisation, ocean ecology, oceanography and geophysics. SST has been measured in situ for over 150 years2, initially from ships and in recent decades from drifting and moored autonomous platforms. SST products derived from Earth-orbiting satellites are complementary to the in situ network, providing finer and more complete spatio-temporal sampling. Satellite SSTs are indirect measurements (“retrievals”), inferred from at-satellite radiances by an inverse method.

This paper presents a climate data record (CDR) of global SST spanning 1981–2016 derived from 4 × 1012 satellite measurements of thermal infra-red (TIR) radiance. The TIR measurements were collected by two series of sensors on Earth-orbiting satellites: 11 Advanced Very High Resolution Radiometers (AVHRRs) and three Along-Track Scanning Radiometers (ATSRs). The spatial footprint of the TIR observations used for good-quality SST retrieval is between 1 km × 1 km (the resolution of the ATSR imagery at nadir view) and 18 km × 2.5 km (the maximum footprint of AVHRR global area coverage (GAC) pixels used). Valid SSTs are obtained from TIR measurements with cloud-free views of ice-free ocean. Quality levels (QLs) are provided that reflect an assessment of the validity of each datum and its uncertainty. QLs are on a scale 0 to 5 inclusive, and values of 4 and 5 are recommended for climate applications. The number of such SST estimates obtained is 13 km−2 yr−1 on average. The SST observation density varies in time and space (Fig. 1).

Fig. 1
figure 1

Characteristics of full resolution (L2P) CCI SSTs (derived from ATSR and AVHRR imagery). (a) Number of SST observations per unit area of ocean (“observation density”), per sensor over time. Each dot represents the observations of a single day. The upper panel shows data for the quality levels recommended for climate applications (QL 4 & 5), and the lower panel shows QL 3. (b) Zonal SST observation density per unit area, for all sensors combined and averaged over the time series. (c) Histogram of evaluated uncertainty in SST observations, for all sensors combined over the time series. (d) Histogram of evaluated sensitivity of SST observations, for all sensors combined over the time series.

Data are provided in four forms: at their native resolution (orbit view); in files of grid-cell-mean SST at 0.05° latitude-longitude resolution (data for individual sensors, as uncollated individual orbits, or collated as daily combinations); and as a blended multi-sensor and gap-filled product on a daily 0.05° grid. In the international nomenclature of satellite processing levels3, these versions of the CDR consist respectively of datasets of the following types: level-2 pre-processed (L2P), level-3 uncollated (L3U), level-3 collated (L3C) and level-4 analysis (L4).

Figure 2 presents the overview of the logic of the production of the CDRs, including the relationships of the different product levels.

Fig. 2
figure 2

Overview of logic of the production of climate data records (CDRs) for sea surface temperature (SST). Calibrated, geo-located satellite data comprising radiance (or brightness temperature) imagery form the fundamental source data. Many processing parameters have been defined by physics-based algorithm development, addressing the harmonisation of satellite radiances between sensors (i.e., consistency of calibration), probabilistic (Bayesian) pixel classification to determine for which pixels valid SSTs can be obtained, retrieval of the skin SST (to which thermal radiances are directly related), adjustment of skin SST to estimate daily mean SST at a nominal depth comparable to in situ measurements, and estimation of SST retrieval and sampling uncertainty. The retrieval and skin-to-depth adjustment steps are informed by estimates of the past atmospheric conditions at the observation locations from numerical weather prediction re-analysis outputs. The low-level SST CDR is at the full pixel resolution of the input imagery (L2P), is gappy because of clouds, and comprises SST and its per-pixel uncertainty. L2P SSTs are averaged on a grid of 0.05° in latitude and longitude to obtain L3U products, sensor by sensor, with propagated cell-mean uncertainty. L3U SSTs are combined across many sensors to generate an interpolated, gap-filled L4 analysis, with uncertainty estimates.

SST values at all levels in the CDR have associated with them a per-datum evaluation of standard uncertainty4. In level 2 and 3 products, a decomposition of the total uncertainty into components with differing correlation structures is also provided. The evaluated total uncertainty is less than 0.8 K for almost all SSTs, and the median evaluated uncertainty for L2P SSTs (i.e., for individual ATSR and AVHRR retrievals) is 0.18 K. The multi-annual global observational stability for the time series, relative to drifting buoy SSTs is, with 95% confidence, in the range −0.0026 to 0.0004 K yr−1. Taken together, these statistics suggest that the dataset gives a detailed representation of SST variability on a range of space and time scales of relevance to climate applications.

SSTs derived from IR radiances are sensitive to the variation in temperature of the skin layer of the ocean5. The skin SST is the temperature most appropriate for determining instantaneous air-sea fluxes, since skin SST determines the surface radiative cooling of the ocean and the temperature and humidity of the air in contact with the air-sea interface. For many purposes, SST estimated at a depth below the skin effect is more appropriate. The difference between skin and depth SST is typically of order tenths of kelvin, but can be larger5. In situ SST measurements2 and the upper layers of ocean models typically reflect SST at depths between ~10 cm and ~10 m. In order to use satellite SSTs with the centennial SST record6, estimates comparable to depths sampled by ships’ buckets7 and drifting buoys are needed. Here, adjustments are provided to convert the instantaneous skin SST to a depth of 20 cm, nominally corresponding to drifter and historic bucket temperature measurements.

Satellite local overpass times differ between missions and sometimes drift during missions (Fig. 3). The diurnal cycle in sea surface temperature has been empirically characterised from sub-daily drifting buoy variability8 and by remote sensing9, and is typically in the peak-to-peak range of 0.1 K to 0.5 K. Under low-wind, strong-sun conditions, it can be ~5 K10. Different overpass times differentially sample SST, generating non-climatic signals if not adjusted for. For this reason, the depth adjustment mentioned above also addresses the diurnal cycle, the depth SST being further adjusted in time to be more representative of the daily mean. Such an adjustment for skin-to-depth and local-time-of-day effects has only, to our knowledge, been done for this CDR and its precursors. The L4 analysis represents a multi-satellite estimate of daily mean SST at 20 cm depth.

Fig. 3
figure 3

Timeline of contributing missions, geophysical and on-orbit events affecting data quality, and El Nino Southern Oscillation (ENSO) phase.

By using ATSR series sensors as the calibration reference for the CDR, a distinctive objective for our CDR is to be as independent of in situ observations as possible. A high degree of independence is achieved for the period 1995 to the end of the record, exploiting ATSR-2 and AATSR. Prior to that period, it has been necessary in this v2.1 CDR to use in situ SSTs as a “calibration” reference on large scales, so that to a significant degree, independence from in situ measurements is lost when considering the period 1981 to 1995.


The dataset is the cumulative outcome of more than a decade of methodological development of: Bayesian methods of cloud screening of imagery11,12; harmonisation of sensor calibrations13, inversion of TIR radiances to SST independently of in situ measurements (i.e., based on physical modelling not empirical tuning14), physical modelling of time-of-day adjustments of retrieved SSTs to minimise the aliasing of daily SST cycles into long-term trends15, and context-specific estimation of total SST uncertainty and uncertainty components16,17. For the purpose of this project, the most complete possible collection of AVHRR GAC data has been assembled.

Input data

The nature of the satellite datasets used in this work is summarised in Table 1. The ATSR-series data (ATSR, ATSR2 and Advanced ATSR) consist of the entire v3/v2.1 level-1b archive ( The level-1b designation indicates that these data consist of calibrated, geo-located brightness temperatures and radiances. The full archives of the AVHRR-series GAC data (AVHRR 7, 9, 11, 12, 14, 15, 16, 17, 18 and 19) were sourced from the “CLASS” archive of NOAA together with additional orbits from the University of Miami (AVHRR 7, 9, 11, 15, 16). GAC data include instrument counts that need to be converted to calibrated radiances. For reflectance wavelengths, a previously published approach to calibration (“PATMOS-X”) is adopted18, which has a stated uncertainty of 2% across sensors. For the thermal channels, AVHRRs brightness temperatures are re-calibrated on-orbit (see below under ‘Harmonisation’) and improvements to flagging of solar contamination events are implemented.

Table 1 Summary characteristics of satellite level-1 data used.

Figure 3 indicates events with significant geophysical signatures in SST and events that affect data quality for individual sensors and, in the case of the major volcanic eruptions, all IR sensors then observing.

Numerical weather prediction (NWP) fields are used as auxiliary information for cloud detection and retrieval. We use the European Centre for Medium-range Weather Forecasting Re-Analysis Interim (ERA-Interim) dataset19, which is consistent in that it is generated with a single version of the atmospheric general circulation model and assimilation scheme, although the availability of data sources for the assimilation evolves through the period. Sea-ice concentration from the Ocean and Sea Ice Satellite Application Facility (OSI-SAF) is used within processing for screening of ice-covered seas, and is processed and provided to users for convenience in the L4 analysis product.

Auxiliary data

Land-sea boundaries are determined from the results of ESA’s land-cover (LC) CCI project20. The LC CCI classifications were additionally processed to create distance-to-land and water-body-identifier datasets21, a derived distance-to-land raster at 1/120th° which we use to assess whether the field of view of a given satellite radiance is wholly filled with water, given its centre location and its view angle. Grid cells at 0.05° latitude-longitude resolution are designated as “ocean” if they are partially ocean. The Caspian Sea is included as ocean.

Static pre-calculated look-up tables (LUTs) are referenced during cloud detection. The cloud detection auxiliary files quantify the conditional probability density function for observed multi-channel wavelength combinations, as a function of parameters such as satellite view angle, given the condition that the observed area is cloud-affected. Separate LUTs are defined for AVHRR and ATSR series.

LUTs are also pre-calculated for the SST retrieval applied to the ATSR-series imagery. These LUTs consist of retrieval coefficients (see ‘Retrieval methods’ below). Spectral response functions for all ATSR-series and AVHRR-series sensors are used in the radiative transfer simulations that underpin both cloud detection and retrieval. The land-sea mask, cloud LUTs, retrieval coefficients and spectral response functions used are available at

Three major volcanic eruptions (El Chichon22; Pinatubo and Hudson23) caused two periods of elevated stratospheric sulfate aerosol (1982–84, 1991–93) with impacts on infra-red brightness temperatures that are significant for SST retrieval24 (e.g., >0.03 K). For cloud detection and SST retrieval from AVHRR, it is useful to have a prior measure of stratospheric aerosol loading and its uncertainty as it evolves in time. We derived an auxiliary dataset for this from High-Resolution Infrared Radiation Sounders by adapting a published method25.

Radiance harmonization

Harmonisation is addressed at the level of infra-red radiance (or, equivalently, brightness temperature). Harmonisation is the reconciliation of the in-flight calibration of sensors, accounting for their measured differences in spectral response26. This reconciliation is achieved by re-calibration of sensors against a reference channel. The reference for channels centred near 3.7 µm and 11 µm is the Advanced ATSR (AATSR). The reference for channels centred on 12 µm is ATSR-2. These choices reflect our level of confidence in the spectral response information and on-board calibration characterisation across the constellation of sensors. In general, we have most confidence in the AATSR among the available sensors. However, the 12 µm channel of AATSR was subject to an anomalous bias of up to 0.3 K, which we have reduced by application of a shift of its nominal spectral response function27, therefore for that channel we have more confidence in ATSR-2. Coincidences (within a space-time window) are used between AATSR and ATSR-2 from the period during which both were observing. The expected differences in brightness temperatures (found by radiative transfer modelling accounting for spectral response differences) are compared with those observed, and an empirical parameterisation of the unexplained differences is found, effectively bringing the calibration of the two sensors into alignment. A similar process applies to the 11 µm and 12 µm channels of ATSR-1, which are harmonised to the equivalent channels of ATSR-2. No reference for the 3.7 µm channel of ATSR-1 is available because the channel failed early in the mission.

The approach is somewhat different for AVHRRs, for which the coefficients of the counts to radiance conversion are re-evaluated, which is harmonisation by re-calibration. The reference sensors for the AVHRR are the ATSR-2 and AATSR. For re-calibrating across sensors, we gathered a dataset of sensor-sensor match-up data consisting of equal-zenith-angle views of a common location within a 5 minute time window. Discrepancies in ATSR/AVHRR BTs (having taken account of expected differences given the available spectral response functions by radiative transfer simulation) are minimised in a least-squares sense by re-estimating the AVHRR coefficients for counts-to-radiance conversion. Outside the period of the reference sensors, overlaps between AVHRRs are similarly used to obtain a chain of calibrations.

Radiative transfer modeling

Cloud detection and retrieval are based on the physics of radiative transfer. Two radiative transfer models are used in the project.

SST retrieval coefficients for the ATSRs are derived from line-by-line layer-by-layer simulations of top-of-atmospheric spectral radiance performed at a channel-dependent spectral resolution always finer than 0.6 × 10−3 cm−1. Except for some differences explicitly described below, the methods are based on published approaches14. The radiative transfer model used is LBLRTM28 v12.2, with the AER29,30 v3.2 spectroscopic databases. Simulated spectral radiances are convolved with ATSR-series spectral response functions to obtain channel radiances. Tropospheric aerosol absorbing and scattering effects are addressed by perturbing channel radiances. Simulations are performed on 2,100 training locations distributed across seasons and across the global oceans with adequate and balanced sampling of profiles geographically, seasonally and with respect to surface temperature and total column water vapour (TCWV). The atmospheric profiles input to LBLRTM comprise meteorological (dynamic) variables and secular (composition) variables. The meteorological variables are air temperature and humidity, and skin surface temperature. Trace gases are included which have absorption properties relevant to simulation of thermal window channels. The trace gas concentrations evolve in time in order to ensure that their secular trends do not cause trend artefacts in SST retrievals.

SST retrieval for the AVHRRs is based on fast radiative transfer modelling (also used for cloud detection). “Fast” here means that channel-integrated radiative transfer is highly parameterised. We use the model RTTOV31 version 11.3 for calculating and integrating clear-sky absorption and (for infrared) emission of channel radiance. Surface reflectance and emission are calculated using respective modules specifically defined for the ocean surface interfaced to RTTOV. The surface emissivity module is a function of wavelength, view angle, windspeed, temperature and salinity, derived from modelling sea-surface wave-facet slope distribution and optical properties32,33.

Cloud detection

Clouds absorb radiance emitted from the sea surface and emit radiance at the cloud top temperature. SST retrieval under the assumption of cloud-free conditions is therefore erroneous if pixels are in fact fully or partially cloud filled. Cloud detection is applied to the satellite imagery to minimise cloud biases in SSTs. Cloud-affected radiances differ from clear-sky radiances because of contrasting spectral emissivity, spectral reflectance, spectral brightness temperature and/or spatial coherence. The same applies to sea-ice affected radiances. For identifying clear-sky pixels, we calculate the probability of clear-sky given the radiances and the prior atmospheric and surface state using Bayes’ theorem as follows11,12:

$$P(c| {\bf{y}},{\bf{x}})=\frac{P({\bf{y}}| {\bf{x}},c)P({\bf{x}}| c)P(c)}{P({\bf{y}}| {\bf{x}})P({\bf{x}})}$$

where: c is the condition of being clear-sky over ice-free ocean; y is the observation vector, here containing the brightness temperatures (BTs) of thermal channels, the reflectances (for day-lit scenes) of reflectance channels and a local standard deviation of BT over 3-by-3 pixels of a thermal channel; and x is the state vector, listing variables describing the prior understanding, from NWP, of the surface temperature, surface wind speed, atmospheric temperature profile and atmospheric humidity profile. This expression simplifies assuming P(x|c) = P(x), since the background state has length scales of ~100 km and does not resolve cloud structures at the finer scales ~1 to ~10 km relevant to the cloudiness of individual pixels. In practice, the term P(y|x) is evaluated as \(P({\bf{y}}| {\bf{x}})=P(\bar{c})P({\bf{y}}| {\bf{x}},\bar{c})+P(c)P({\bf{y}}| {\bf{x}},c)\), where the over-bar indicates “not clear-sky over water” and \(P\left(\bar{c}\right)=1-P\left(c\right)\). Evaluating the posterior probability of clear-sky therefore amounts to quantifying: P(c), the prior probability of a pixel being clear-sky; P(y|x, c), the probability density function (pdf) of the observation vector, given the NWP and a condition of clear skies; and \(P\left({\bf{y}}| {\bf{x}},\bar{c}\right)\), the pdf of the observation vector given cloud conditions. For P(c), the NWP local cloud fraction is used, although constrained to the range 0.05 and 0.5 so as not to determine the outcome too strongly from that prior. P(y|x, c) is calculated on-the-fly by radiative transfer simulation, accounting for the uncertainty in x, noise in observations and uncertainty in forward modelling. \(P\left({\bf{y}}| {\bf{x}},\bar{c}\right)\) is evaluated from look-up tables, obtained iteratively by accumulating the reflectance, brightness temperature and spatial coherence properties of cloud-flagged areas over several years of orbits in a prior pass of cloud detection; for this purpose, AATSR and the AVHRR on Metop-A are used to create pdf LUTs used for all the sensors in their respective series.

SSTs are evaluated for those pixels for which the posterior probability of clear sky, P(c|y, x), exceeds 90% (case of ATSR series) or 99% (case of AVHRR series). The probability does not have a frequentist interpretation (i.e., when P(c|y, x) = 90% visual inspection suggests that the image pixels are cloudy less than 10% of the time).

Retrieval of skin SST

Sea surface temperature retrieval relies on the sensitivity of top-of-atmosphere radiances to the Planck emission from the sea surface. Because of the sea surface’s non-ideal spectral emissivity and because of absorption, emission and scattering processes in the atmosphere, BTs differ from the underlying SST. For the “window channels” generally used for SST retrieval—namely, 11 µm, 12 µm and (for night-time scenes) 3.7 µm—magnitudes of SST-BT difference for different thermal channels and view angles bear relationships that allow multi-channel observations (and multi-angle observations where available) to be inverted to estimate the SST. A variety of inverse algorithms have been published and reviewed34,35.

Single-pixel SSTs from the ATSR-series are derived using retrieval coefficients that weight the observed dual-view brightness temperatures using the equation


where x is the retrieved SST, a0 is an offset coefficient, a is a vector listing weights for each channel brightness temperature (BT) and y is the observation vector containing the corresponding channel brightness temperatures. For ATSR SSTs, the observation vector includes BTs at both nadir (0° to ~22°) and forward (~53°) view angles. The coefficients are defined for different strata of total column water vapour (TCVW) and are smoothly interpolated to the prior TCWV obtained from the NWP fields interpolated at the time and place of the observation. Likewise, the coefficient LUTs have dimensions in nadir and forward view angle, and in time (to account for the secular evolution of trace gases). These single-pixel SSTs are used to form the higher-level products, beginning with the L3U product, which contains the simple averages of clear-sky single-pixel SSTs in 0.05° grid-cells.

The products containing full resolution SST imagery (L2P) from the ATSR-series are populated with atmospherically smoothed SST estimates. Atmospherically smoothed SSTs are preferable for ATSR SSTs to reduce the SST noise at full spatial resolution. SSTs from dual-view retrievals can yield very low uncertainty from systematic effects but are prone to being noisy (relatively large independent random errors in individual pixel SSTs), particularly when using two channels (at 11 and 12 µm). For the imagery products, it is useful to reduce this noise somewhat by exploiting the fact that the space scales of the clear-sky atmosphere tend to be much longer than the SST pixel separations. The retrieval method is a variant of the single-pixel method shown above:

$$\mathop{x}\limits^{ \sim }={a}_{0}+{{\bf{a}}}^{\text{T}}\langle {\bf{y}}\rangle +{{\bf{b}}}^{\text{T}}({\bf{y}}-\langle {\bf{y}}\rangle )$$

where \(\widetilde{x}\) is the atmospherically smoothed36 SST for the central pixel of a 5 × 5-pixel box. y is the vector of BTs spatially averaged across the clear-sky pixels of that box. The retrieval coefficients, a0 and a, are as for single-pixel SST retrieval. The vector b has unit magnitude, its contents are non-zero only for nadir channels, and the non-zero terms are inversely proportional to the square of each channel’s radiometric noise. The smoothed retrieval thus comprises a box-average SST plus a term that adjusts for within-box variability of SST to make a lower-noise estimate of the SST of the pixel at the centre of the box.

Single-pixel SSTs, rather than atmospherically smoothed, are used as input to the L3U product since averaging to 0.05° in any case averages down the independent random noise, and the propagation of uncertainty from single-pixel SSTs is simpler.

SSTs from the AVHRR-series are derived using an atmospherically smoothed reduced-state-space pseudo-maximum-likelihood inverse37. Unlike the ATSR-series, the AVHRRs are single-view sensors, which reduces the information content available for determining SST compared to the dual-view ATSRs. Particularly for day-lit scenes, where only the 11 and 12 µm channels are used, single-view coefficient-based retrievals are associated with geographical biases arising from this information content deficit38. We use an inverse within the family of “optimal estimation” (OE) algorithms to bring additional prior information to the retrieval explicitly. The retrieved state vector is a reduction of the full state profile to three summary terms: \({\bf{z}}={[x,\bar{x},\bar{w}]}^{\text{T}}\) where \(\bar{x}\) and \(\bar{w}\) are SST and TCWV averaged over the surrounding clear pixels of the 3 × 3 GAC box centred on the pixel for which the retrieved SST is x. The smooth-atmosphere-but-variable-SST assumption is imposed by fixing the TCWV for the centre pixel and the surrounding clear pixels to be identical (hence only one TCWV term in z). \(\bar{x}\) emerges from the calculation but is not used. The OE approach is based on the difference between the observations and simulated BTs derived from RTTOV applied to the full prior-state profile from NWP. Designating the simulated BTs as F(x), we have

$${\bf{z}}={{\bf{z}}}_{a}+{{\bf{S}}}_{a}{{\bf{K}}}^{\text{T}}{({{\bf{K}}{\bf{S}}}_{a}{{\bf{K}}}^{\text{T}}+{{\bf{S}}}_{\varepsilon })}^{-1}({\bf{y}}-{\bf{F}}({{\bf{x}}}_{a}))={{\bf{z}}}_{a}+{\bf{G}}({\bf{y}}-{\bf{F}}({{\bf{x}}}_{a}))$$

where xa is both a prior estimate of the state and point of linearization for forward modelling; za is the reduced equivalent to xa; S variables are error covariance matrices, \({{\bf{S}}}_{\varepsilon }\) being that of the measurement-relative-to-forward-model errors, and Sa being that of the reduced prior state errors; K comprises the derivatives of the observations in y with respect to the reduced state variables, which are outputs of RTTOV. A crucial choice is the magnitude of uncertainty attributed to the prior SST (which in the NWP system was obtained from a number of operational sources19). Since the prior NWP fields have some dependence on in situ SST, we choose to minimise the influence of the prior SST on the retrieved state by adopting an inflated uncertainty in the prior SST that is sufficiently small to provide useful regularisation of the inverse and sufficiently large that the influence of the prior on the retrieved SST is controlled to be <5% for the SSTs given a quality indication of 4 or 5 (see below). Sensitivity to true SST is estimated as the leading term in the “averaging kernel” matrix GK, and quantifies the fractional response in the retrieved estimate to true SST variability. The sensitivity is associated with each SST, and the median sensitivity for QL 4 & 5 data is 101%, close to the ideal value of 100%. Thus, a high level of independence from in situ SST observations is preserved, despite use of prior information for the above inverse.

Uncertainty estimate for skin SST

Estimates of standard uncertainty4 (which may be considered as the standard deviation of the estimated error distribution) are provided for every SST39 at all product levels. Errors in satellite-derived SSTs do not all fall neatly into those arising from random and systematic effects, since errors introduced in the retrieval are locally correlated between pixels40. For each skin SST estimate in the L2P products, a total uncertainty estimate is provided, which is the standard uncertainty from all sources of error combined. The total uncertainty is derived by combining three components of uncertainty, whose estimates are also provided. The components are designated by their error correlation structure (uncorrelated, synoptically correlated and large-scale correlated).

Errors that are independent (uncorrelated) between observations arise from the instrumental noise in the satellite observations of brightness temperature. The uncorrelated component of uncertainty is estimated therefore by propagating models of instrumental noise through the retrieval process. Typically, the process of retrieval amplifies noise by a factor that varies between ~2 and ~8, depending on the channel combination, viewing geometry and atmospheric state.

The component of uncertainty labelled as synoptically correlated refers to errors that are largely in common (nearly perfectly correlated) between SST observations that are adjacent and simultaneous, and become randomised (uncorrelated) as spatio-temporal distance between observations increases. The decorrelation length scales are not yet quantified in detail, but the physical origin of the correlated errors is understood to arise from the imperfectly accounted-for influence of the atmospheric state on the estimated SST41. In the case of coefficient-based retrievals, the uncertainty is estimated from the residuals when determining the coefficients. In the case of optimal estimation, the error covariance matrix of the retrieval is a standard quantity that is calculated, and extracting the component corresponding to the propagation of Sa through the retrieval provides an estimate of the SST uncertainty. Since the effect causing the errors reflects aspects of the atmospheric state, the decorrelation scales are related to the length scales of the atmosphere, and are considered likely to be of order 1 day and 100 km.

The systematic component in the SST uncertainty covers all effects that may be described as biases, whether in the sensors’ calibrations, radiative transfer models or physical assumptions made in retrieval (for example, in relation to the loading of atmospheric aerosol). This component of uncertainty is difficult to estimate, although an upper bound of order 0.1 K can be established by comparison with other SST data, and this value is used.

Some sources of error are not estimated by the above procedures. These include the SST impact of cloud-affected pixels that nonetheless pass the cloud-detection procedures, unaccounted-for aerosol effects on BTs from volcanic eruptions and mineral dust, and issues such as undetected solar contamination of measurements that may affect AVHRRs. It is for these reasons that an indicator of quality is also given. Evidence of an observation context in which true uncertainty may be significantly larger than evaluated is one factor in downgrading the quality level attached to an SST.

Quality indication

A confidence level on a scale 0 to 5 is provided for each SST as a quality indicator, following an international convention3. Five (5) indicates the highest confidence. Quality levels 4 and 5 should be used for climate applications where absolute accuracy of SST is important. Some users may find lower quality level data useful, e.g., where SST front locations are detectable in the SST fields, which requires only relative, not absolute, accuracy.

The quality indicator is influenced by the confidence we have that the SST uncertainty estimate for a given SST is valid39. SSTs with relatively high uncertainty can still therefore be flagged as good quality, provided there is nothing to indicate that the assumptions made in estimating the uncertainty are compromised. The most significant quality factors are undetected cloud and coarse-mode aerosol (primarily desert dust): the uncertainty estimates for SST are valid under clear-sky, low-aerosol conditions, and therefore the quality level 5 is attributed only for high clear-sky probability and for conditions of low aerosol (assessed by a desert dust index42,43) or where steps to adjust for aerosol are taken (the case for the volcanic stratospheric aerosol events). The desert dust index is only available to check for the ATSR series sensors, since it relies on having dual-view observations. Users need to be aware that mineral-dust-affected AVHRR SSTs are present intermittently in the products, particularly for the north east tropical Atlantic Ocean, the Red Sea and the Gulf of Arabia, and such data may be given quality level 5 flags without the biasing effect of the aerosol being accounted for in the attached uncertainty; see further information in Usage Notes below. This is an aspect of the dataset that requires improvement in future work.

In the case of optimally estimated SSTs, the goodness-of-fit of posteriori simulated and observed brightness temperatures is calculated, using a chi-square statistic. Large values of chi-square indicate that the inter-relationships of the brightness temperatures are not as expected for a clear-sky observation given the background information. The quality levels of pixels with large chi-square are therefore downgraded.

In order to maximise the use of this dataset for assessment of in-situ based SST measurements and for model testing, it is important for the SSTs to have high sensitivity to true SST variations (which means minimal dependence on the prior SST information). For this reason, the quality levels of SSTs with low sensitivity are downgraded.

The thresholds and logic for quality level assignment are shown in Fig. 4.

Fig. 4
figure 4

Logic and thresholds for assigning pixel quality level (QL) flags to L2P SSTs. “Invalid data” means input data are flagged as invalid. “Land” means the centre of the pixel is not over ocean. “Bad NWP” means tests on the integrity of the prior fields are failed. Pclear is the posterior probability of the pixel being clear-sky over ice-free ocean. “sens” is the evaluation of sensitivity of the retrieval to true changes in SST. χ2 is the channel-normalised result of a test on the goodness of fit achieved in retrieval (applies to optimally estimated SST only). θsat is the satellite zenith angle of the retrieval. “twilight” means the solar zenith angle at the target pixel is within 5° of 90°. “DDI” refers to an index for presence of desert (mineral) dust aerosol (available for ATSRs only). The Pclear threshold of 0.90 for designation as QL > 3 is for the ATSRs and AVHRRs at night-time, and for AVHRRs observations during daytime is instead 0.99.

Adjustments by depth and time

The primary retrieved quantity is the skin SST estimate made at the satellite overpass time. The skin SST is pertinent to air-sea fluxes, but nonetheless, many users seek an estimate of SST at depths of order tens of centimetres, whether because this makes the observations compatible with many historic in situ SSTs from drifting buoys and bucket measurements, or because this depth is more comparable to the upper layer of an ocean model. For this reason, the products include an adjustment which, when added to the skin SST, gives an estimate of the SST at a depth of 20 cm. By adding this adjustment, the resulting SST is nominally comparable to what would be measured by a drifting buoy at the satellite observation time.

There is a diurnal cycle in SST that has been empirically characterised using satellite observations9 and drifting buoys8. The satellite observations are obtained at local times of day that change through the record (Fig. 3 and Table 1). Aliasing of this diurnal cycle with varying times of observation will produce spurious inter-annual trends if not adjusted for. For this reason, an adjustment is also calculated for time-of-day effects. The SST at 10.30 or 22.30 local mean solar time is a good approximation to the daily mean8. Moreover, from 1991 onwards, there has always been a mid-morning satellite observing at close to this local time needing minimal adjustment. For these reasons the temporal adjustment is an estimate of the change in SST between the observation time and the nearest of 10.30 or 22.30 local mean solar time. The time and depth adjustments are estimated using a one-dimensional turbulence closure model driven by re-analysis surface fluxes and wind stress. The uncertainty from this adjustment is also calculated and included in the total uncertainty provided for the daily mean depth SST estimate.

Gridded SST products

Gridded versions of data (L3U and L3C, see Fig. 5) are provided on a spatial grid of 0.05° in latitude and longitude. Gridded L3U products are made from L2P (full resolution orbit data) by averaging only the SSTs of the highest available quality level within the cell. Simple averaging is used. The quality level of the gridded value is the quality level of the data used to form the average.

Fig. 5
figure 5

SST content in data in different product levels. L2P data are on the original viewing geometry, with gaps in SST from cloud cover. These are gridded per orbit to L3U. A day’s worth of L3U SSTs from a given sensor is collated to form an L3C product. Data from multiple sensors are merged and interpolated to give the daily gap-free SST field of the L4 analysis.

When averaging n L2P SSTs to make daily 0.05° gridded L3 products, the uncertainty from random errors decreases from “1/√n” averaging, whereas the uncertainty from the other two components does not. (When gridding L2P data to larger and/or longer scales, averaging down of the correlated errors would occur, but this is negligible for one pass on a scale of the grid cell.) The SST of a 0.05° cell is often calculated from pixels that do not fill the cell, because of cloud cover, but users typically treat the gridded SST as a value representative of the cell as a whole, and therefore the sub-sampling is another source of uncertainty. The uncertainty is parameterised effectively in terms of the fraction of the cell observed and the variability in SST in the observed part of the cell17. There is no correlation of this effect between cells, so this contributes to the uncorrelated component of uncertainty in the L3U SST products.

Each day’s L3U SSTs from each individual sensor are gathered as L3C SST (gridded daily products). The content of an L3C grid cell is the average of the highest quality L3U SST obtained during the day.

Analysed SST

The gridded SST products are used as the inputs to a gap-filled estimate of the daily-mean SST field on the same 0.05° grid (Fig. 5). This L4 product is intended to represent the SST at 20 cm depth, and the time-and-depth adjusted SSTs are the inputs used. The method of estimating the spatially complete SST field is variational assimilation, using a scheme called NEMOVAR44. The principle of the variational assimilation scheme is to minimise a cost function

$$J(\delta {\bf{x}})\propto \delta {{\bf{x}}}^{\text{T}}{{\bf{B}}}^{-1}\delta {\bf{x}}+\delta {{\bf{y}}}^{\text{T}}{{\bf{R}}}^{-1}\delta {\bf{y}}$$

with respect to δx, which is the change between the present-day’s solution and a forecast of the present day based on the previous-day’s solution. B represents the error covariance of the forecast. δy is the difference between the new SSTs observed during the present day and the expected SST observations given the solution δx. Even if the new solution were perfect, δy would be non-zero because of uncertainty (SST measurement errors and representativity effects), and R represents the error covariance associated with that uncertainty. For computational simplicity, the errors in the new SSTs are assumed to be uncorrelated within the analysis system. The solution found by the minimum therefore balances the information carried forward from the previous day with the information added by new observations, in the light of their relative uncertainty, accounting for correlations in the forecast errors.

A key aspect of the variational assimilation scheme is the parameterisation of B, which affects the location and degree of smoothing of SST features that inevitably occurs when in-filling the gappy observations of SST of a given day. B influences the feature resolution of the analysis. In the scheme used, B is parameterised such that the degree of smoothing reacts to the local variability of SST (quantified by the SST gradients present in the previous-day’s solution)45. Note that the feature resolution is thus coarser than the grid cell size. Uncertainty information is also provided in the L4 products, which is estimated using an analysis quality method46.

Data Records

The dataset title, digital object identifier, full name, description, and data volume are given for our products47,48,49,50,51,52,53 at different processing levels in the Tables 2 to 5. All data are released under the licence Creative Commons Attribution 4.0 International (CC-BY 4.0,

Table 2 Data record information for orbit-geometry (level 2) SST CCI products.
Table 3 Data record information for gridded, single-sensor (level 3U) SST CCI products.
Table 4 Data record information for gridded, single-sensor collated (level 3C) SST CCI products.
Table 5 Data record information for the gridded, multi-sensor, interpolated (level 4) SST CCI product.

Technical Validation

Verification processes

For all levels of SST CCI data in each public release, technical verification and quality tasks are undertaken, consisting of three steps: automated inspection of all files; visual inspection of a random subset; and manual verification of metadata against the product specification document (PSD)54.

The automated quality assessment of L2P and L3U consists of checks that are configurable for each product level and are applied to every file in the dataset. The checks consist of basic checks (file name follows the convention, file can be read, etc) and specific checks on the data (all variables exist, data are within prescribed boundaries, etc). Specific checks include the verification of inter-variable consistency, i.e. if a pixel contains a fill-value in the SST variable, the associated uncertainty variables must also contain a fill-value at the same location. The consistency of per-pixel flags versus per-pixel quality indicators is verified: e.g., quality level 0 (“no_data”) should be present for pixels flagged to be over land. The automated verification results are stored per-file and merged into a summary, ensuring traceability of the results. A set of standardised graphics for each sensor is generated that facilitates a global view of the data quality.

For the visual inspection, two products of each sensor and processing level are randomly selected, one from early and one from late in the sensor’s useful life. Using the toolbox SNAP each variable in this file set is visually inspected for artefacts, unusual structures or inconsistent geometries. The histogram of each variable is checked for plausibility. Manual verification of the product metadata against the PSD is done using two randomly selected products from the dataset for each processing level. Global metadata and the attributes of each variable are checked against the prescribed values defined in the PSD. Visual inspections of L4 files were also undertaken.

Verification results

The automated inspection was applied to all 465,302 L2P SST products and the same number of L3U SST products. The total data volume analysed comprises 8 TB of L2P and 3.4 TB of L3U data. The results of the automated inspection of the dataset show a high degree of technical compliance. Two non-compliances have been detected, as follows. Around 0.005% of the SST files contain only fill value data; spot checking shows that these files originate from periods of outgassing or are satellite commissioning-phase acquisitions. 0.001% to 0.5% of records (depending on the sensor) show flag or mask inconsistencies; these inconsistencies only appear at quality level 1 (“bad_data”), and so do not affect the recommended uses of the dataset; these inconsistencies will be resolved in a future version.

The visual inspection of the test-dataset did not reveal any unusual structures. All histograms of the variables showed the expected distributions. Minor discrepancies between data and product user guide have been detected that will do not affect the usability of the dataset.


A Climate Assessment Report55 presents an assessment of trends and variability in the SST CCI products (at all levels: L2P, L3 and L4) and comparison to other SST products. In order to assess the multi-annual and decadal behaviour of the new products, comparisons are made to existing long-term (usually coarser resolution) SST data sets used in high profile monitoring reports. Differences between the SST CCI products and the comparison datasets are highlighted. The SST CCI products are also assessed against previous releases by the ESA CCI SST project to determine what progress has been achieved. This process is not validation, but does provide important context for potential users to allow them to determine whether or not the products are credible CDRs and might prove useful.

Time series of SST anomalies referenced to a long-term climatology are calculated and compared for 61 regions of the world’s oceans, together with relevant indices, such as for the El Nino Southern Oscillation. Linear trends in these regional series are presented. Maps of decadal average anomalies demonstrate any large-scale differences between the new products and the comparison data sets. Maps of correlations at different lags demonstrate the level of persistence seen in the products. Should these diagnostics then highlight anything worth exploring further, bespoke investigations can be made.

The Group for High-Resolution SST (GHRSST) Multi-Product Ensemble (GMPE) system was designed to allow intercomparison of near real time analyses56. The GMPE system regrids all the input data on to a common 0.25° grid and generates the median and standard deviation of the analyses available on each day. Daily files are generated containing the median and standard deviation, as well as the differences between each individual analysis and the GMPE median. In addition, a map of gradients in the SST analyses (calculated on their original grids and regridded to the standard GMPE grid) is provided. This analysis is also included in the Climate Assessment Report and provides a mechanism for comparison of the SST CCI analysis product to other higher-resolution analyses (largely) for the satellite era, alongside the comparison to longer-term data sets outlined above.

Validation against in situ measurements

All products have been validated against in situ measurements of SST according to the Product Validation Plan57. In interpreting validation results, the degree of independence between the measurements being compared is important. To further secure the objectivity of validation results, the personnel performing the validation analysis were independent of the teams undertaking the remote sensing research and product generation. Three categories of validation were carried out. ‘Skin-raw’ comparisons direct compared skin SSTs from the satellites with matched in situ data, not attempting to adjust for the known geophysical processes that give rise to differences. In ‘skin-skin’ validation, the in situ data are adjusted to the skin-depth and time of the matched satellite measurement. In ‘depth-depth’ validation, the satellite retrieval adjusted to 20 cm depth at 10:30 h or 22.30 h local time is compared to in situ. Depth and time adjustments were calculated using a combined model of the skin-effect and diurnal thermocline15. The validation analysis was done for all levels (L2P, L3U and L3C) for both the SST CCI ATSR and SST CCI AVHRR records. The SST CCI analysis (in which no in situ measurements are assimilated) was also validated ‘depth-depth’, in accordance to the definition of the analysis. Full detailed validation results for individual sensors contributing to the SST CCI ATSR and SST CCI AVHRR will be published elsewhere. An overview of results from validating the SST CCI ATSR and SST CCI AVHRR records against drifting buoys (‘depth-depth’) is shown in Fig. 6. The statistics shown are robust standard deviations (RSD, equal to the scaled median absolute deviation, the scaling being chosen to match the standard deviation for a normal distribution) and median discrepancies between CCI and in situ SSTs. Figure 6c is the variability of the median discrepancy against drifting buoys over time and latitude for the SST CCI analysis. The excellent stability of the ATSR series observations, especially for the ATSR-2 and AATSR periods, is emphasised in panel b. CCI AVHRR SSTs are also generally better during the period of overlap with ATSRs from the 1990s onwards. Note that some of larger discrepancies during the 1980s reflect the relative sparsity and quality of the in situ network at that time, as well as artefacts in the CCI SSTs discussed further in the usage notes that follow. Regional variability in the SST CCI AVHRR results in latitudes affected by dust aerosols manifest as a cool bias in the SST CCI analysis results in the zone from 0° to 20° N.

Fig. 6
figure 6

Overview of validation results. Robust standard deviation (a) and median discrepancy (b) for comparison of CCI ATSR and AVHRR SSTs with drifting buoys. Depth-depth validation results are shown, in which satellite skin SSTs have been adjusted to 10:30 am/pm local time and in situ records have been temporally interpolated to the same time. (c) Time/latitude variation of analysis minus drifting-buoy SST differences, averaged zonally and monthly.

Usage Notes

Fitness-for-purpose assessment (climate science applications)

Prior to public release, the data have been used in climate modelling experiments at the Met Office Hadley Centre and by a number of trail-blazer users given early access in exchange for feedback. A brief conceptual summary of these trial uses follows.

CCI analysis SSTs were used as the lower-boundary forcing in atmosphere-only simulations and compared with compatible simulations forced with HadISST. daily ¼° SST58. The impacts on simulation of cloud regimes, tropical cyclones, the Asian summer monsoon, the Madden-Julian Oscillation, the El Nino Southern Oscillation (ENSO) and mid-latitude storm tracks were all objectively assessed. The differences were generally smaller than differences arising from changes in model resolution. Beneficial and detrimental differences were observed. Warmer SST around the Maritime Continent and as well as cooler SST around the equatorial Atlantic and upwelling regions of at the eastern boundaries of ocean basins were associated with reduced bias in cloud regimes, although inference that the CCI analysis SSTs are more realistic cannot be directly made. The CCI analysis SSTs tend to be warmer than the comparator in the Southern Hemisphere, and there is southward shift in the distribution of the tropical organized convective regime and a corresponding increase in simulated tropical cyclone activity in that hemisphere, although the impact was modest compared to existing model biases. In the monsoon regions, colder Arabian Sea SSTs in the L4 analysis reduced the moisture flux over the western Ghats mountains, and there were detrimental increases in rainfall (from increased convergence) in the South China Sea and western Pacific Ocean, related to warmer SSTs in these regions.

Trail-blazer users looked at various applications. An application of the data to provide an SST climatology for the Australian seas found the data to be highly consistent with mooring measurements in the region and able to provide a convincing climatology. A study on the use of CCI analysis SSTs at the locations of coral reefs near Florida and Belize found that the inferred coral-reef heat stress could differ from previous estimates59. An assessment of CCI analysis SSTs for oceanographic application over the Eastern Atlantic concluded that open ocean SST values had lower uncertainties than in coastal zones, where comparisons with coastal buoys gave discrepancies of between 0.3 K and 0.8 K (root mean square differences), concluding that higher feature resolution would benefit near-coastal applications. A study of ENSO variability in a coupled climate model showed reduced cold-tongue simulation biases from a model upgrade, relative to SST CCI observations.

Overall, notwithstanding the limitations of the SST CCI products identified by inter-comparison and validation, users found the datasets easy to use and useful within the context of their applications. Users of a precursor version of SST CCI data have demonstrated its use for evaluating biases between different instrumentally homogenous observational datasets60 and for propagating observational uncertainty to scales required in model evaluation61.

Known artefacts in the CDR v2.1 include the following. Unscreened and unadjusted-for desert dust events cause intermittent negative biases of magnitude 1 K in CCI AVHRR SSTs in the north east tropical Atlantic, Red Sea and Gulf of Arabia; the sensitivity of ATSR-series sensors to these events is much less. Since only AVHRRs are available during the first decade of the CDR, whereas ATSRs were available from 1991 to 2012, the CCI analysis SST anomalies show an exaggerated positive trend in these regions through the time series, thought to be about 0.01 to 0.02 K yr−1. During the 1980s, we were able to use only one AVHRR sensor at a time other than brief overlaps. Some periods of degraded calibration of these sensors cause temporary observational instabilities in the CDR. The following periods show biases not accounted for within the stated uncertainties that introduce artefacts in the global-mean CCI analysis SST appearing to be in the range of 0.1 to 0.5 K: May 1982, October to December 1982, early August 1983 and late September 1983.

Reading the products (quick start)

All data are stored in NetCDF-4 format files. Data arrays in NetCDF files are known as ‘variables’ and each variable has metadata stored with it. To get correct values in correct units, the add_offset and scale_factor attributes need to be applied when reading the variables; many tools will do this automatically for NetCDF files, so no action may be necessary. The names of key variables in the product files are given in Table 6 below. The notes below the table include important points about interpreting the quality and location.

Table 6 Key information about variables in SST CCI products.

ATSR, AVHRR or analysis product?

A visual impression of what to expect in terms of SST data in different products is given by Fig. 6. To work on SST features such as fronts and eddies at the highest possible resolution, L2P products should be used, the disadvantage being the need to work with gappy data on non-repeating latitude-longitude co-ordinates. To work on data on a regular grid, but maximally preserving features, L3C products should be used, bearing in mind these are also gappy data. If spatially complete fields are required, the L4 analysis should be used. Users of L4 should bearing in mind that that this product is derived from the SSTs that are adjusted to 20 cm and to a local time representative of the daily average SST, and that the process of interpolation inevitably means feature resolution is degraded relative to the lower-level data.

Which type of SST?

The sea_surface_temperature variable contains the primary observed quantity, which is the estimated temperature of the radiometric skin layer of the ocean at the time observed. This SST is the more directly relevant to instantaneous air-sea interactions. The sea_surface_temperature_depth variable contains an SST adjusted from the observed value to be more comparable with sub-surface in situ measurements (such as underpin centennial-scale SST reconstructions) and more representative of the daily mean SST (adjusting for time-of-day effects). This SST is more directly relevant for analyses of long-term SST differences and changes.

How should I use the quality and uncertainty information?

Quality 4 and 5 SSTs should be used where the absolute accuracy of the SSTs is important, particularly for climate applications. Quality 3 SSTs may be usable by users to whom maximising the SST coverage is the primary concern, in applications (such as pattern-based analyses) where absolute accuracy is less critical.

The evaluations of total uncertainty provided are relevant to all users for propagating the SST uncertainty through their application and assessing the robustness of their findings. Examples of usage are available in a product user guide (available along with other documentation at

Where applications involve use of the aggregated data on spatio-temporal scales coarser than the CCI SSTs, the errors contributing to the total uncertainty cannot be assumed to be fully independent between SST values. To assist users seeking to understand uncertainty in quantities derived from SSTs at other spatio-temporal scales, three components contributing to the total uncertainty are evaluated (in the L2P and L3C products). The large-scale correlated component can be treated as arising from “systematic” errors. The uncorrelated component describes uncertainty arising from independent (often called “random”) errors. The third component represents uncertainty arising from errors that are correlated locally – i.e., the errors are the same or similar for SSTs obtained near each other in space and time but become independent for large separations. The scales of correlation are not yet fully understood. However, a rule of thumb is that this component can be treated as “systematic” for scales less than ~100 km and ~1 day and “random” for scales much greater than these scales. Further work is required to develop more rigorous means of evaluating uncertainty across spatio-temporal scales.

How should I refer to the products in publications?

Experience shows that it is sometimes difficult even for the data producer to infer which dataset has been used in publications based on previous data releases. We recommend to users the following practice, in reference to tables Tables 2 to 5. In the first reference to the dataset in a publication, the dataset title and/or full dataset name should be given, including version number (v2.1), which unambiguously identifies the dataset. A brief description of the dataset contents and characteristics can be based on the basic descriptive text suggested in Tables 2 to 4. When referring to the product thereafter, usage such as (from Table 2) “using the SST CCI ATSR products” is recommended. When referring to the SSTs in a product, usage such as (from Table 4) “frontal features in CCI analysis SSTs were stronger” is recommended. (“CCI” could be omitted if no similar products of different origin are used.) We encourage re-statement of the data version number in legends of figures, captions, presentation slides or other elements of publications that may circulate independently. Publications should reference this paper and the data citation. Following these suggestions will maximise the traceability and reproducibility of the work.

Will the climate data record be extended in time?

The SST CCI v2.1 climate data record described here covers the period to the end of 2016. Products were generated using fixed processing configurations and auxiliary information. Under funding of the Copernicus Climate Change Service (C3S), the extension of SST data in time is ongoing, covering the start of 2017 onwards. The extension is an interim climate data record (ICDR): this means that the scientific basis and practical form are consistent, so that users can validly use the ICDR seamlessly with the longer dataset. Users should be aware that, in an ICDR, some parameters of the processing have to change over time or may not be fully optimised. For example: the NWP data stream used as auxiliary information must change in the ICDR during 2019, because of the scheduled halt to the production of ERA-Interim; instrument degradation may prompt us to halt using a satellite data stream or introduce a new data stream, but the timing of this may not be optimised as effectively as in a retrospective CDR reprocessing. Users will find that the ICDR consists of v2.0 files rather than v2.1. The main differences are that SST anomaly values are not precalculated and available for users in v2.0 files as they are in v2.1, and the uncertainty variables follow a different naming convention. Nonetheless, the SSTs are recommended for seamless use across the v2.0 ICDR and v2.1 CDR, since the scientific basis is fully consistent. The v2.0 ICDR will be available with the ongoing post-2016 extension products via the climate data store of the C3S, at

The European Space Agency recently funded a continuation of the SST CCI project, which will enable future release of SST CCI v3 products covering the period up to the end of 2020.

Code availability

For the toolbox SNAP see Example code to read data products and generate Fig. 5 is available62.


  1. Global Climate Observing System, The Global Observing System for Climate: Implementation Needs, GCOS-200 (GOOS-214). (2016).

  2. Kent, E. C. et al. A Call for New Approaches to Quantifying Biases in Observations of Sea Surface Temperature. Bull. Amer. Meteor. Soc. 98, 1601–1616 (2017).

    Article  Google Scholar 

  3. GHRSST Science Team. The Recommended GHRSST Data Specification (GDS) 2.0 document revision 4. GHRSST International Project Office (2011).

  4. Working Group 1 of the Joint Committee for Guides in Metrology. Evaluation of measurement data – Guide to the expression of uncertainty in measurement. JCGM 100:2008, (2008).

  5. Minnett, P. J., Smith, M. & Ward, B. Measurements of the oceanic thermal skin effect. Deep-Sea Research Part II: Topical Studies in Oceanography. 58(6), 861–868 (2011).

    Article  ADS  Google Scholar 

  6. Kennedy, J. J., Rayner, N. A., Smith, R. O., Saunby, M. & Parker, D. E. Reassessing biases and other uncertainties in sea-surface temperature observations since 1850 part 1: measurement and sampling errors. J. Geophys. Res. 116, D14103 (2011).

    Article  ADS  Google Scholar 

  7. Carella, G. et al. Measurements and models of the temperature change of water samples in sea‐surface temperature buckets. Q.J.R. Meteorol. Soc. 143, 2198–2209 (2017).

    Article  ADS  Google Scholar 

  8. Morak‐Bozzo, S., Merchant, C. J., Kent, E. C., Berry, D. I. & Carella, G. Climatological diurnal variability in sea surface temperature characterized from drifting buoy data. Geosci. Data J. 3, 20–28 (2016).

    Article  ADS  Google Scholar 

  9. Zhang, H. et al. Comparison of SST diurnal variation models over the Tropical Warm Pool region. J. of Geophys. Res. Oceans 123, 3467–3488 (2018).

    Article  ADS  Google Scholar 

  10. Gentemann, C. L., Minnett, P. J., Le Borgne, P. & Merchant, C. J. Multi-satellite measurements of large diurnal warming events. Geophysical Research Letters 35(22), L22602 (2008).

    Article  ADS  Google Scholar 

  11. Merchant, C. J., Harris, A. R., Maturi, E. & MacCallum, S. Probabilistic physically-based cloud screening of satellite infra-red imagery for operational sea surface temperature retrieval. Quarterly Journal of the Royal Meteorological Society 131(611), 2735–2755 (2005).

    Article  ADS  Google Scholar 

  12. Bulgin, C. E., Mittaz, J. P. D., Embury, O., Eastwood, S. & Merchant, C. J. Bayesian cloud detection for 37 Years of Advanced Very High Resolution Radiometer (AVHRR) Global Area Coverage (GAC) data. Remote Sens. 10(1), 97 (2018).

    Article  ADS  Google Scholar 

  13. Giering, R. et al. A novel framework to harmonise satellite data series for climate applications. Remote Sens. 11(9), 1002 (2019).

    Article  ADS  Google Scholar 

  14. Embury, O., Merchant, C. J. & Filipiak, M. J. A reprocessing for climate of sea surface temperature from the Along-Track Scanning Radiometers: basis in radiative transfer. Remote Sens. Env. 116, 32–46 (2012).

    Article  ADS  Google Scholar 

  15. Embury, O., Merchant, C. J. & Corlett, G. K. A reprocessing for climate of sea surface temperature from the Along-Track Scanning Radiometers: initial validation, accounting for skin and diurnal variability. Remote Sens. Env. 116, 62–78 (2012).

    Article  ADS  Google Scholar 

  16. Bulgin, C. E., Embury, O., Corlett, G. & Merchant, C. J. Independent uncertainty estimates for coefficient based sea surface temperature retrieval from the Along-Track Scanning Radiometer instruments. Remote Sens. Env. 178, 213–222 (2016).

    Article  ADS  Google Scholar 

  17. Bulgin, C. E., Embury, O. & Merchant, C. J. Sampling uncertainty in gridded sea surface temperature products and Advanced Very High Resolution Radiometer (AVHRR) Global Area Coverage (GAC) data. Remote Sens. Env. 178, 287–294 (2016).

    Article  ADS  Google Scholar 

  18. Heidinger, A. K., Straka, W. C. III., Molling, C. C., Sullivan, J. T. & Wu, X. Deriving and inter-sensor consistent calibration for the AVHRR solar reflectance data record. International Journal of Remote Sensing 31, 6493–6517 (2010).

    Article  ADS  Google Scholar 

  19. Dee, D. P. et al. The ERA‐Interim reanalysis: configuration and performance of the data assimilation system. Q. J. Roy. Meteorol. Soc. 137, 553–597 (2011).

    Article  ADS  Google Scholar 

  20. Lamarche, C. et al. Compilation and Validation of SAR and Optical Data Products for a Complete and Global Map of Inland/Ocean Water Tailored to the Climate Modeling Community. Remote Sens. 9, 36 (2017).

    Article  ADS  Google Scholar 

  21. Carrea, L., Embury, O. & Merchant, C. J. Datasets related to in-land water for limnology and remote sensing applications: distance-to-land, distance-to-water, water-body identifier and lake-centre co-ordinates. Geoscience Data Journal 2(2), 83–97 (2015).

    Article  ADS  PubMed  Google Scholar 

  22. Matson, M. The 1982 El Chichón Volcano eruptions – A satellite perspective. J. Volcanol. Geotherm. Res. 23(1–2), 1–10 (1984).

    Article  ADS  Google Scholar 

  23. Lambert, A. et al. Measurements of the evolution of the Mt. Pinatubo aerosol cloud by ISAMS. Geophys. Res. Lett. 20(12), 1287–1290 (1993).

    Article  ADS  Google Scholar 

  24. Merchant, C. J., Harris, A. R., Murray, M. J. & Zavody, A. M. Toward the elimination of bias in satellite retrievals of skin sea surface temperature 1. Theory, modeling and inter-algorithm comparison. Journal of Geophysical Research 104(C10), 23565–23578 (1999).

    Article  ADS  Google Scholar 

  25. Baran, A. J. & Foot, J. S. New application of the operational sounder HIRS in determining a climatology of sulphuric acid aerosol from the Pinatubo eruption. J. Geophys. Res. 99(D12), 25673–25679 (1994).

    Article  ADS  Google Scholar 

  26. Woolliams, E., Mittaz, J., Merchant, C. & Dilo, A. Harmonization and Recalibration: A FIDUCEO perspective. GSICS Quarterly (ed. Manik Bali) 10(2), 1–2, (2016).

    Article  Google Scholar 

  27. Remedios, J. J., Corlett, G. & Embury, O. AATSR 12 Micron Anomaly Review Board – Final Report ADDENDUM. ESA/ESRIN IDEAS-VEG-OQC-REP-1274_ADDENDUM, (2016).

  28. Clough, S. A. et al. Atmospheric radiative transfer modeling: a summary of the AER codes. J. Quant. Spectrosc. Radiat. Transf. 91, 233–244 (2005).

    Article  ADS  CAS  Google Scholar 

  29. Rothman, L. S. et al. The HITRAN 2008 molecular spectroscopic database. J. Quant. Spectrosc. Radiat. Transf. 110, 533–572 (2009).

    Article  ADS  CAS  Google Scholar 

  30. Mlawer, E. J. et al. Development and recent evaluation of the MT_CKD model of continuum absorption. Philos.Trans. R. Soc. Math. Phys. Eng. Sci. 370, 2520–2556 (2012).

    Article  ADS  CAS  Google Scholar 

  31. Saunders, R. et al. An update on the RTTOV fast radiative transfer model (currently at version 12). Geosci. Model Dev. 11, 2717–2737 (2018).

    Article  ADS  Google Scholar 

  32. Cox, C. & Munk, W. Slopes of the sea surface deduced from photographs of sun glitter. Bull. Scripps Inst. Oceanogr. 6(9), 401–488 (1956).

    Google Scholar 

  33. Embury, O., Merchant, C. & Filipiak, M. Refractive indices (500–3500 cm−1) and emissivity (600–3350 cm−1) of pure water and seawater. Edinburgh Data Share, (2008).

  34. Petrenko, B., Ignatov, A., Kihai, Y., Stroup, J. & Dash, P. Evaluation and selection of SST regression algorithms for JPSS VIIRS. J. Geophys. Res. Atmos. 119, 4580–4599 (2014).

    Article  ADS  Google Scholar 

  35. Merchant, C. J. & Embury, O. Simulation and inversion of satellite thermal measurements. In: Zibordi, G., Donlon, C. J. & Parr, A. C. (eds) Optical radiometry for ocean climate measurements. Experimental methods in the physical sciences, 47 (47) Academic Press, pp. 489–526 (2014).

  36. Harris, A. R. & Saunders, M. A. Global validation of the along‐track scanning radiometer against drifting buoys. J. Geophys. Res. 101(C5), 12127–12140 (1996).

    Article  ADS  Google Scholar 

  37. Merchant, C. J., Le Borgne, P., Roquet, H. & Legendre, G. Extended optimal estimation techniques for sea surface temperature from the Spinning Enhanced Visible and Infra-Red Imager (SEVIRI). Remote Sensing of Environment 131, 287–297 (2013).

    Article  ADS  Google Scholar 

  38. Merchant, C. J., Harris, A. R., Roquet, H. & Le Borgne, P. Retrieval characteristics of non-linear sea surface temperature from the Advanced Very High Resolution Radiometer. Geophysical Research Letters 36(17), L17604 (2009).

    Article  ADS  Google Scholar 

  39. Merchant, C. J. et al. Uncertainty information in climate data records from Earth observation. Earth System Science Data 9, 511–527 (2017).

    Article  ADS  Google Scholar 

  40. Mittaz, J. P. D., Merchant, C. J. & Woolliams, E. Applying Principles of Metrology to Historical Earth Observations from Satellites. Metrologia 56(3), 032002 (2019).

    Article  Google Scholar 

  41. Merchant, C. J., Horrocks, L. A., Eyre, J. R. & O’Carroll, A. G. Retrievals of sea surface temperature from infrared imagery: origin and form of systematic errors. Quarterly J. Roy. Meteorol. Soc. 132, 1205–1223 (2006).

    Article  ADS  Google Scholar 

  42. Merchant, C. J., Embury, O., Le Borgne, P. & Bellec, B. Saharan dust in night-time thermal imagery: detection and reduction of related biases in retrieved sea surface temperature. Remote Sensing of Environment 104, 15–30 (2006).

    Article  ADS  Google Scholar 

  43. Good, E. J., Kong, X., Embury, O. & Merchant, C. J. An infrared desert dust index for the Along-Track Scanning Radiometers. Remote Sensing of Environment 116, 159–176 (2012).

    Article  ADS  Google Scholar 

  44. Mogensen, K. S., Balmaseda, M. A. & Weaver, A. The NEMOVAR ocean data assimilation system as implemented in the ECMWF ocean analysis for System 4, Technical report 668. ECMWF, Reading, UK (2012).

  45. Fiedler, E. K. et al. Improvements to feature resolution in the OSTIA sea surfacetemperature analysis using the NEMOVAR assimilation scheme. Q. J. R. Meteorol. Soc. Published online, (2019).

  46. Donlon, C. J. et al. The Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) system. Remote Sensing of Environment. 116, 140–158 (2012).

    Article  ADS  Google Scholar 

  47. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Along-Track Scanning Radiometer (ATSR) Level 2 Preprocessed (L2P) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  48. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Advanced Very High Resolution Radiometer (AVHRR) Level 2 Preprocessed (L2P) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  49. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Along-Track Scanning Radiometer (ATSR) Level 3 Uncollated (L3U) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  50. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Advanced Very High Resolution Radiometer (AVHRR) Level 3 Uncollated (L3U) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  51. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Along-Track Scanning Radiometer (ATSR) Level 3 Collated (L3C) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  52. Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Advanced Very High Resolution Radiometer (AVHRR) Level 3 Collated (L3C) Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  53. Good, S. A., Embury, O., Bulgin, C. E. & Mittaz, J. ESA Sea Surface Temperature Climate Change Initiative (SST_cci): Level 4 Analysis Climate Data Record, version 2.1. Centre for Environmental Data Analysis. (2019).

  54. Sea Surface Temperature CCI Phase-II Product Specification Document, SST_CCI-PSD-UKMO-201 (PSD), version 2, 2017-05-09, available at,

  55. Sea Surface Temperature CCI Phase-II Climate Assessment Report, SST_CCI-CAR-UKMO-201 (CAR), Issue 1, 16/6/2019, available at,

  56. Martin, M. et al. Group for High Resolution Sea Surface temperature (GHRSST) analysis fields inter-comparisons. Part 1: A GHRSST multi-product ensemble (GMPE). Deep Sea Research Part II: Topical Studies in Oceanography 77–80, 21–30 (2012).

    Article  ADS  Google Scholar 

  57. SST-CCI Product Validation Plan (PVP) SST_CCI-PVP-UOL-001, Issue 2, 4 February 2014, available at,

  58. Titchner, H. A. & Rayner, N. A. The Met Office Hadley Centre sea ice and sea surface temperature data set, version 2: 1. Sea ice concentrations. J. Geophys. Res. Atmos. 119, 2864–2889 (2014).

    Article  ADS  Google Scholar 

  59. Liu, G. et al. Reef-scale thermal stress monitoring of coral ecosystems: new 5-km global products from NOAA Coral Reef Watch. Remote Sensing 6, 11579–11606 (2014).

    Article  ADS  Google Scholar 

  60. Hausfather, Z. et al. Assessing recent warming using instrumentally homogeneous sea surface temperature records. Science Advances 3(1), e1601207 (2017).

    Article  ADS  PubMed  PubMed Central  Google Scholar 

  61. Bellprat, O. et al. Uncertainty propagation in observations references to climate model scales. Rem. Sens. Environment. 203, 101–108 (2017).

    Article  ADS  Google Scholar 

  62. Embury, O. ESA SST CCIv2.1: Code to plot content of example data products. figshare. (2019).

Download references


The authors gratefully acknowledge funding for this work as follows. The European Space Agency supported two phases of the Climate Change Initiative for Sea Surface Temperature, which has provided the majority of the support leading to the outcomes herein described, via grant references 4000101570/10/I-AM and 4000109848/13/I-NB. Foundational work has been supported by the Natural Environment Research Council (NERC) grants: NE/D001099/1, NE/C508893/1, NE/D001129/1, NE/H004130/1 and NE/D011582/1. Use of the Centre for Environmental Data Analysis computational facilities been supported in part by the NERC National Centre for Earth Observation. We are grateful for the testing of a pre-release version of the products undertaken by a group of trail-blazer users. We acknowledge contributions to climate assessment by Malcolm Roberts and Gill Martin and to developments of the CCI analysis SSTs by Chongyuan Mao. The team acknowledges gratefully the project management undertaken by Hugh Kelliher of Space Connexions Ltd, UK.

Author information

Authors and Affiliations



C.M. was science leader of SST CCI project, led the proposals for funding of the project, devised significant parts of the methodology applied, wrote the majority of this manuscript, and organised and edited the contributions of co-authors. O.E. undertook the largest share of software development and data generation for the L2P and L3C products, made methodological contributions to SST retrieval, cloud detection, geolocation, ATSR cross-calibration and quality flagging, devised the detailed implementations of SST retrieval and bias corrections, and contributed text and figures to this paper. C.B. contributed to software development and data generation for the L2P and L3C products, and made methodological and implementation contributions to AVHRR cloud detection and SST uncertainty evaluation, and contributed text to this paper. T.B. undertook software development related to match-up datasets used scientifically within the project and provided the results and text on product verification. G.C. led the methodology and implementation of validation of SST CCI products, and provided results to this paper. E.F. contributed to the methodological developments and product generation related to the SST CCI analysis products. S.G. led the methodological developments and product generation related to the SST CCI analysis products. J.M. led the efforts in collecting, calibrating and improving the level 1 AVHRR data used. N.R. led efforts in user interaction and communications, and organised use of pre-release data in climate modelling experiments and trail-blazer user applications, and contributed text and figures to the paper. D.B. devised methodologies and provided results related to assessment of SST stability. S.E. devised methodologies for discrimination of sea-ice, cloud and open water in marginal sea-ice zones. M.T. prepared Figure 1. Y.T. led climate model assessment activities. A.W. provided information technology and data standards support. R.W. contributed to project management of SST CCI and prepared Figure 3. C.D. was ESA technical officer supporting the SST CCI project team, shaped the remit of SST CCI, and reviewed the manuscript of this paper.

Corresponding author

Correspondence to Christopher J. Merchant.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

The Creative Commons Public Domain Dedication waiver applies to the metadata files associated with this article.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Merchant, C.J., Embury, O., Bulgin, C.E. et al. Satellite-based time-series of sea-surface temperature since 1981 for climate applications. Sci Data 6, 223 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing