Jupiter’s upper atmosphere is considerably hotter than expected from the amount of sunlight that it receives1,2,3. Processes that couple the magnetosphere to the atmosphere give rise to intense auroral emissions and enormous deposition of energy in the magnetic polar regions, so it has been presumed that redistribution of this energy could heat the rest of the planet4,5,6. Instead, most thermospheric global circulation models demonstrate that auroral energy is trapped at high latitudes by the strong winds on this rapidly rotating planet3,5,7,8,9,10. Consequently, other possible heat sources have continued to be studied, such as heating by gravity waves and acoustic waves emanating from the lower atmosphere2,11,12,13. Each mechanism would imprint a unique signature on the global Jovian temperature gradients, thus revealing the dominant heat source, but a lack of planet-wide, high-resolution data has meant that these gradients have not been determined. Here we report infrared spectroscopy of Jupiter with a spatial resolution of 2 degrees in longitude and latitude, extending from pole to equator. We find that temperatures decrease steadily from the auroral polar regions to the equator. Furthermore, during a period of enhanced activity possibly driven by a solar wind compression, a high-temperature planetary-scale structure was observed that may be propagating from the aurora. These observations indicate that Jupiter’s upper atmosphere is predominantly heated by the redistribution of auroral energy.
Jupiter was observed with the 10-m Keck II telescope for five hours on both 14 April 2016 and 25 January 2017 using NIRSPEC (Near-InfraRed Spectrometer14), with the spectral slit aligned north–south along the axis of planetary rotation (Fig. 1a). Spectral images were acquired as Jupiter rotated, as shown in Fig. 1b, c, in which rotational–vibrational (ro-vibrational) emission lines of the H3+ ion can be seen extending from pole to equator. These ions are a major constituent of Jupiter’s ionosphere and mainly reside in the altitude range 600–1,000 km above the 1-bar pressure surface15. The intensity ratio of two or more H3+ lines can be used to derive the column-averaged parameters of that ion: temperature, number density and radiance16. As H3+ is assumed to be in quasi-local thermodynamic equilibrium with Jupiter’s upper atmosphere16, its derived temperature is representative of the region. Details of the H3+ fitting process and global mapping of parameters are provided in the Methods and in Extended Data Figs. 1, 2.
Global maps of upper-atmospheric temperature have been produced previously17, but the spatial resolution was such that about two pixels covered 45–90° latitude in each hemisphere, making it difficult to assess how the auroral region was connected to the rest of the planet. In those maps, equatorial temperatures were similar to auroral values, a finding that would indicate that a heat source is active at low latitudes. In Figs. 2 and 3, we show near-global maps of Jovian column-averaged H3+ temperature, density and radiance, which are the product of several thousand individual fits to the spectral data (see Methods). Using a magnetic field model, we have overlaid oval-shaped lines on the polar regions of Jupiter in both Figs. 2 and 3, with each representing the footprint of magnetic field lines that trace from the planet out to a particular distance in Jupiter’s equatorial plane18. The main (auroral) oval traces on average to 30RJ in Jupiter’s equatorial plane (RJ is Jupiter’s equatorial radius of 71,492 km at the 1-bar pressure level). The satellite footprints of Io and Amalthea are fiducial markers, mapping out from the planet to 5.9RJ and 2.54RJ in the equatorial plane, respectively.
Temperatures generally decrease from 1,000 K to 600 K between auroral latitudes and the equator, as shown in Figs. 2 and 3. Densities of H3+, which are enhanced by aurorally driven charged-particle precipitation19,20, cut off sharply near the main oval on both dates, indicating that the direct influence of the aurora ends within several degrees of the main oval. At the same time, equatorward of the auroral regions, H3+ temperatures do not sharply fall with latitude. In the absence of any known sub-auroral electric current systems (as are common on Earth21) provided through magnetosphere–ionosphere coupling that cause planetary-scale ion–neutral collisions, we interpret the observed temperature gradients as strong evidence that the auroral upper atmosphere is migrating away from the auroral region to lower latitudes and adjacent longitudes, transporting its heat signature along with it. This must then be enabled principally by equatorward-propagating meridional winds.
The Jovian magnetosphere, which is subjected to the solar wind, compresses in response to high dynamic pressure exerted the solar wind22. One model has shown that magnetospheric compression events could lead to propagation of heat away from the main auroral oval towards the equator and polar cap, introducing a temporary local temperature increase of 50–175 K (refs. 10,23). Temperatures were higher planet-wide on 25 January, as were main oval H3+ densities, so a solar wind propagation model24 was used to examine the solar wind dynamic pressure and other parameters at Jupiter near the dates of our observations. It was found that dynamic pressures were over an order of magnitude higher within a day of the 25 January observations, relative to quiet conditions, and almost three times higher than conditions on 14 April. This is indicated in Extended Data Figs. 3–5 (along with increased activity in other parameters). Total auroral power has previously been found to correlate positively with the duration of quiet solar wind conditions before a solar wind compression22, so, given the much longer, quieter period of solar wind activity before the 25 January observations reported here (relative to 14 April), we expect that auroral energy deposition was larger on 25 January. Factoring in the uncertainty of the arrival time of the modelled solar wind at Jupiter, ±1 days on 14 April and ±1.5 days on 25 January, we conclude that Jupiter was observed to be in the middle of a global heating event owing to solar wind compression of the Jovian magnetosphere on 25 January.
An unusual high-temperature structure was found on 25 January equatorward of the main auroral oval, extending for 160° longitude. Here, relatively cold (~800 K) atmosphere is surrounded by hot auroral and sub-auroral atmosphere at ~1,000 K. The structure appears to straddle the fiducial footprint of Amalthea, a region mapping to Jupiter’s equatorial plane at 2.5RJ via the magnetic field, but there are no known substantial sources of plasma or current systems linking those regions. It is possible that the structure is a large region of heated upper atmosphere, caught propagating equatorward away from the main auroral oval after a ‘pulse’ in solar wind pressure was exerted on the magnetosphere10. If a heated wave of atmosphere propagates equatorward from the main auroral oval at similar velocity over all longitudes, it is likely to retain the main oval shape along the way; thus the apparent alignment of the feature with Amalthea may be circumstantial. Here we provide a simple equatorward velocity estimate to examine whether the feature’s propagation is realistic. We use the latitude separation between the structure’s centre and the main oval, which grows with longitude and therefore with time, since the data are recorded in order of increasing longitude. Equatorward velocities for the hot feature were evaluated between 180° and 260° longitude in steps of 20° longitude, with ~33 min of time elapsing between each step owing to planetary rotation. A median velocity of 620 m s−1 was calculated, with minima and maxima of 500 m s−1 and 1,500 m s−1, respectively. These velocities are similar to equatorward-propagating travelling ionospheric disturbances observed in Earth’s ionosphere (300–1,000 m s−1)25 but much higher than equatorward velocities reported at Saturn (up to 100 m s−1)26 and modelled for Jupiter (~180 m s−1)6,10.
In the vicinity of the main oval, H3+ temperatures and densities are found to anticorrelate. This may be due to charged particles having higher average precipitation energies here relative to other regions, and so penetrating deeper, producing H3+ at lower, colder altitudes, or evidence that H3+ is efficiently cooling the atmosphere through infrared emissions20,27. Indeed, this may explain how the main oval appears relatively colder relative to adjacent regions, despite the fact the region may have been recently heated by hot structure as it passed by. Alternatively, the hot structure may have been triggered by an event that lasted a short period of time, sending a single wave of hot atmosphere towards the equator, while the main oval returned to relatively quiet conditions. Morphological differences between the aurorae on each date indicate the location and depth of auroral precipitation, which is reflected in the derived parameters, as reported by previous observations19,20. The median column-integrated H3+ densities on 14 April and 25 January between the equator and 30° north were 4 × 1015 m−2 and 2 × 1015 m−2, respectively, with the latter being similar to previous values17. The F10.7 index, an indicator of solar activity via 10.7-cm radio emissions, was 111.8 solar flux units (SFU) and 82.5 SFU on these dates—that is, 36% larger on 14 April, explaining in part this H3+ density difference. Note that retrieved H3+ column densities here are expected to be lower by 20% or more of their true value, owing to temperature and density gradients in the upper atmosphere27; thus differences in vertical gradients may also contribute to the measured density difference. Radiance maps indicate the degree to which H3+ radiatively cools the upper atmosphere, and radiance positively correlates with both temperature and density.
Temperature gradients should reveal the dominant heat sources in Jupiter’s upper atmosphere, with wave heating showing localized low-latitude peaks12, and auroral heating showing a monotonic fall from aurora to equator. The gradients presented here are consistent with the latter, at least on these two observed dates. Therefore, the Coriolis forces and other effects that are simulated to confine auroral energy to the magnetic polar regions are evidently overcome at Jupiter. One general circulation model appeared to redistribute auroral heat successfully at Jupiter6, but subsequent models did not replicate the finding, so the process that allows meridional transport remains unclear9,10. At Saturn, latitude–altitude temperature profiles also show a negative gradient from the aurora to lower latitudes26, while a recent Saturn model presents a possible mechanism to disrupt the trapping of heat in the polar regions there28. Main auroral oval H3+ densities and global H3+ temperatures were much lower on 14 April than on 25 January, potentially in agreement with model projections24 that the solar wind dynamic pressure on the Jovian magnetosphere was highest on the latter date, increasing the rates of auroral particle precipitation and global heating10. The observations on 25 January also revealed, by chance, a planetary-scale heated structure, which may be propagating away from the main auroral oval in response to a solar wind compression of the magnetosphere, or may originate in the inner magnetosphere via an unknown mechanism.
Additional observing details
On 14 April 2016 and 25 January 2017, Jupiter was recorded between 04:53–10:22 UTC and 11:36–16:28 UTC, respectively. The spectrometer slit measured 24″ long by 0.432″ wide as shown in Fig. 1, and each pixel along the slit had a angular resolution of 0.144″ per pixel. The spectral resolution was λ/δλ ≈ 25,000. On 14 April, each of the 115 recorded spectral images of Jupiter was 30 s long and formed by six integrations each 5 s long. On 25 January, the 80 recorded spectral images of Jupiter were 60 s long and formed by six integrations each 10 s long. The process of saving spectral images and nodding the telescope between positions results in overhead time which led to an average elapsed time between Jupiter spectra of 2.4 min (14 April) and 3.4 min (25 January), so Jupiter rotated a respective 1.4° and 2.3° in longitude during this time.
For the spectral images, standard astronomical data reduction techniques were applied such as the subtraction of sky spectra from Jupiter spectra to remove unwanted emissions of the Earth’s atmosphere (mainly from water), and the accounting of non-uniformity in the response of the NIRSPEC detector via flat fielding and dark-current subtraction. To convert the photon counts at the detector to units of physical flux, a stellar flux calibration was performed using the A0 stars HR2250 and HR3314 for 14 April and 25 January, respectively. This process is outlined in detail in previous studies16.
Spatially mapping spectra
Although the width of the slit is 0.432 arcseconds, the longitudes assigned to the slit have a wider range due to atmospheric seeing. The 14 April and 25 January observation nights had clear skies with an atmospheric seeing of 0.61″ and 0.81″, respectively. The use of multiple guider images within each spectral image allowed for tracking errors to be accounted for, such that the derived position of the slit on Jupiter was from the average position of the slit seen in the guiding images. Owing to the width of the slit, atmospheric seeing and the close distances on the planet between each spectral image, multiple spectra can be ascribed to a single longitude × latitude cell (spatial bin). In this work, we use five spatial bin sizes: 10° × 10°, 8° × 8°, 6° × 6°, 4° × 4° and 2° × 2° longitude × latitude. All data were arranged into five four-dimensional (4D) arrays for each observation night of dimensions longitude × latitude × spectra × overlap. The overlap dimension holds the multiple available spectra of each spatial bin, as displayed in Extended Data Fig. 1.Each of the 4D arrays was collapsed into the three dimensions longitude × latitude × spectra, by taking the median value of each available spectral element. For example, the spectral dimension has 2,048 elements. For a spatial bin that includes 50 overlapping spectra, that means each of the 2,048 spectral elements has 50 values associated with it. By taking the median of the 50 available values, we ensure each spectral element is not skewed towards outlying data. Larger spatial bin sizes encompass more overlapping data, improving the statistical accuracy of the median value obtained, but at the cost of spatial resolution.
Fitting to H3 +
The H3+ ion has millions of ro-vibration transition lines that vary in intensity depending on the ion temperature29, and by finding the ratio between two or more emission lines we can obtain the H3+ temperature. The total number of emitting ions can then be calculated by dividing the observed emission by that of a single H3+ ion emitting at the temperature found above, producing a line-of-sight column-integrated density. A cosine function correction of the planetary emission angle is applied to remove the line-of-sight effects of viewing geometry. The radiance of H3+ (also known as the H3+ radiative cooling rate) is then found by summing the modelled emission intensities over all wavelengths.
In this work, we used the R(3,0) and Q(1,0) H3+ lines at 3.41277 μm and 3.9529 μm (respectively) because of their consistently high SNR at all latitudes. These H3+ lines were fitted to and characterized using MPFIT, a least-squares curve-fitting routine30, as shown in the example fits of Extended Data Fig. 2. Non-H3+ emissions were found at some latitudes and were subtracted. The data were then passed to a computational model that determines the parameters of H3+ based on the line ratios as described by the previous paragraph16. Uncertainties in MPFIT and the H3+ fitting model were propagated through and reflected in the results. Note that these observations are column integrations of the entire path-length of the ionosphere and convolve all vertical structure. Models have demonstrated that these retrieved column-integrated H3+ densities represent the lower limits of actual values, while column-averaged H3+ temperatures primarily represent the temperature at the altitude peak of H3+ density27.
Uncertainty-limited mapping of H3 + parameters
The data in every spatial cell of the five data cubes were fitted so as to produce parameter maps of H3+ column-integrated temperature, density and radiance, along with corresponding uncertainties. A total of 15 maps were produced for each night: three H3+ parameters at the five aforementioned spatial bin sizes. Ideally this study would use only the 2° × 2° maps, but these smaller bins can have lower SNR outside of the hot auroral regions and thus undesirably high uncertainties. In such a case, selecting a larger 4° × 4° bin size to gather more signal and reduce uncertainties is preferable, even though it reduces our ability to see fine detail spatially. To produce a map populated by low-uncertainty data at the smallest bin sizes possible planet-wide, we introduce a technique called uncertainty-limited binning. For example, an H3+ temperature map is produced by starting with a blank map, and then all 2° × 2° longitude × latitude resolution temperatures that have uncertainties under 5% are added. For parts of the map that were not populated by this first pass, data are drawn from the next spatial size up—the 4° × 4° temperature map (again with uncertainties under than 5%)—and this process is then iterated for all remaining larger spatial bin sizes up to 10° × 10°. H3+ column-integrated temperature and radiance maps are uncertainty-limited to 5%, while densities are limited to 15%.
Observational data that are the basis of this study are publicly available on the Keck telescope observatory archive at https://koa.ipac.caltech.edu/cgi-bin/KOA/nph-KOAlogin?more under Semester search terms ‘2016A’ or ‘2017A’ and Principal Investigator ‘ODonoghue’. Source data are provided with this paper.
Open-source computer code used for fitting to H3+ and producing temperatures, densities and radiances is available in the Python programming language at https://pypi.org/project/h3ppy/. Least-squares curve-fitting routine MPFIT is referenced in the Methods and available as part of the Interactive Data Language (IDL) suite of available programmes at https://www.l3harrisgeospatial.com/ docs/mpfit.html.
Strobel, D. F. & Smith, G. R. On the temperature of the Jovian thermosphere. J. Atmos. Sci. 30, 718–725 (1973).
Yelle, R. V. & Miller, S. Jupiter’s Thermosphere and Ionosphere 185–218 (Cambridge Univ. Press, 2004).
Yates, J. N., Ray, L. C., Achilleos, N., Witasse, O. & Altobelli, N. Magnetosphere–ionosphere–thermosphere coupling at Jupiter using a three-dimensional atmospheric general circulation model. J. Geophys. Res. Space Phys. 125, e26792 (2020).
Waite, J. H., Jr. et al. Electron precipitation and related aeronomy of the jovian thermosphere and ionosphere. J. Geophys. Res. 88, A8 (1983).
Achilleos, N. et al. JIM: a time-dependent, three-dimensional model of Jupiter’s thermosphere and ionosphere. J. Geophys. Res. 103, 20089–20112 (1998).
Bougher, S. W., Waite, J. H., Majeed, T. & Gladstone, G. R. Jupiter Thermospheric General Circulation Model (JTGCM): global structure and dynamics driven by auroral and Joule heating. J. Geophys. Res. Planets 110, E04008 (2005).
Smith, C. G. A., Aylward, A. D., Millward, G. H., Miller, S. & Moore, L. E. An unexpected cooling effect in Saturn’s upper atmosphere. Nature 445, 399–401 (2007).
Ma, Y. J. et al. Plasma flow and related phenomena in planetary aeronomy. Space Sci. Rev. 139, 311–353 (2008).
Smith, C. G. A. & Aylward, A. D. Coupled rotational dynamics of Jupiter’s thermosphere and magnetosphere. Ann. Geophys. 27, 199–230 (2009).
Yates, J. N., Achilleos, N. & Guio, P. Response of the Jovian thermosphere to a transient pulse in solar wind pressure. Planet. Space Sci. 91, 27–44 (2014).
Schubert, G., Hickey, M. P. & Walterscheid, R. L. Heating of Jupiter’s thermosphere by the dissipation of upward propagating acoustic waves. Icarus 163, 398–413 (2003).
O’Donoghue, J., Moore, L., Stallard, T. S. & Melin, H. Heating of Jupiter’s upper atmosphere above the Great Red Spot. Nature 536, 190–192 (2016).
Lian, Y. & Yelle, R. V. Damping of gravity waves by kinetic processes in Jupiter’s thermosphere. Icarus 329, 222–245 (2019).
McLean, I. S. et al. Design and development of NIRSPEC: a near-infrared echelle spectrograph for the Keck II telescope. SPIE Conf. Series 3354, 566–578 (1998).
Uno, T. et al. Vertical emissivity profiles of Jupiter’s northern H3+ and H2 infrared auroras observed by Subaru/IRCS. J. Geophys. Res. 119, 10219–10241 (2014).
Melin, H. et al. On the anticorrelation between H3+ temperature and density in giant planet ionospheres. Mon. Not. R. Astron. Soc. 438, 1611–1617 (2014).
Lam, H. A. et al. A baseline spectroscopic study of the infrared auroras of Jupiter. Icarus 127, 379–393 (1997).
Connerney, J. E. P. et al. A new model of Jupiter’s magnetic field from Juno’s first nine orbits. Geophys. Res. Lett. 45, 2590–2596 (2018).
Johnson, R. E. et al. Mapping H3+ temperatures in Jupiter’s northern auroral ionosphere using VLT-CRIRES. J. Geophys. Res. Space Phys. 123, 5990–6008 (2018).
Dinelli, B. M. et al. JUNO/JIRAM’s view of Jupiter’s H3+ emissions. Phil. Trans. R. Soc. Lond. A 377, 20180406 (2019).
Heelis, R. A. & Maute, A. Challenges to understanding the Earth’s ionosphere and thermosphere. J. Geophys. Res. Space Phys. 125, e27497 (2020).
Kita, H. et al. Characteristics of solar wind control on Jovian UV auroral activity deciphered by long-term Hisaki EXCEED observations: evidence of preconditioning of the magnetosphere? Geophys. Res. Lett. 43, 6790–6798 (2016).
Cowley, S. W. H. et al. A simple axisymmetric model of magnetosphere–ionosphere coupling currents in Jupiter’s polar ionosphere. J. Geophys. Res. Space Phys. 110, A11209 (2005).
Tao, C., Kataoka, R., Fukunishi, H., Takahashi, Y. & Yokoyama, T. Magnetic field variations in the jovian magnetotail induced by solar wind dynamic pressure enhancements. J. Geophys. Res. Space Phys. 110, A11208 (2005).
Figueiredo, C. A. O. B. et al. Large-scale traveling ionospheric disturbances observed by GPS dTEC maps over North and South America on Saint Patrick’s Day storm in 2015. J. Geophys. Res. Space Phys. 122, 4755–4763 (2017).
Brown, Z. et al. A pole-to-pole pressure–temperature map of Saturn’s thermosphere from Cassini Grand Finale data. Nat. Astron. 4, 872–879 (2020).
Moore, L. et al. Modelling H3+ in planetary atmospheres: effects of vertical gradients on observed quantities. Phil. Trans. R. Soc. Lond. A 377, 20190067 (2019).
Müller-Wodarg, I. C. F. et al. Atmospheric waves and their possible effect on the thermal structure of Saturn’s thermosphere. Geophys. Res. Lett. 46, 2372–2380 (2019).
Neale, L., Miller, S. & Tennyson, J. Spectroscopic properties of the H3+ molecule: a new calculated line list. Astrophys. J. 464, 516–520 (1996).
Markwardt, C. B. Non-linear least-squares fitting in IDL with MPFIT. In Astronomical Data Analysis Software and Systems XVIII Vol. 411 (eds Bohlender, D. A. et al.) (Conference Series no. 251, Astronomical Society of the Pacific, 2009).
The data presented herein were obtained at the W. M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California and NASA. The Observatory was made possible by the generous financial support of the W. M. Keck Foundation. The authors wish to recognize and acknowledge the cultural role and reverence that the summit of Maunakea has always had within the indigenous Hawaiian community. We are fortunate to have the opportunity to conduct observations from this mountain. L.M. was supported by NASA under grant no. NNX17AF14G issued through the Solar System Observations Program and grant no. 80NSSC19K0546 issued through the Solar System Workings Program.
The authors declare no competing interests.
Peer review information Nature thanks George R. Gladstone and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
a, 25 January 2017; b, 14 April 2016. Each element contains an array of intensities as a function of wavelength, as described in the main text. Data cubes like this also exist for spatial resolutions 2° × 2°, 6° × 6°, 8° × 8° and 10° × 10°.
Extended Data Fig. 2 Selected example fits to data representing multiple days, differing longitudes, latitudes and spatial bin size.
a,b, 14 April 2016; c,d, 25 January 2017. Red lines, fits; black crosses, data. Fits to non-H3+ emissions are denoted as noise and 1σ uncertainties to each line are indicated.
Extended Data Fig. 3 A 1D model of solar wind propagation surrounding the dates of the observations reported here.
The orange shaded regions mark the period of ground-based observations. From top to bottom, each panel corresponds to solar wind density, temperature, radial (x; Jupiter–Sun line) and azimuthal (y; direction of planetary orbital motion) velocities, magnetic field By, dynamic pressure of the solar wind plotted linearly and logarithmically, and the absolute magnetic field magnitude |B| (ref. 24). The 1σ uncertainty in arrival time of the solar wind at Jupiter is denoted by the horizontal, arrowed lines. Produced using Tao–MHD, the magnetohydrodynamic model by Tao et al.24
Extended Data Fig. 4 A 1D model of solar wind propagation surrounding the dates of the observations reported here.
The orange shaded regions mark the period of ground-based observations. From top to bottom, each panel corresponds to solar wind density, temperature, radial (x; Jupiter–Sun line) and azimuthal (y; direction of planetary orbital motion) velocities, magnetic field By, dynamic pressure of the solar wind plotted linearly and logarithmically and the absolute magnetic field magnitude |B| (ref. 24). The 1σ uncertainty in arrival time of the solar wind at Jupiter is denoted by the horizontal, arrowed lines
Extended Data Fig. 5 A 1D model of solar wind propagation closely surrounding the dates of the observations reported here.
The blue shaded regions mark the periods of ground-based observations. Absolute magnetic field magnitude |B| and dynamic pressure of the solar wind (SW) at Jupiter are shown as a function of date and time24. The 1σ uncertainty in arrival time of the solar wind at Jupiter is denoted by the horizontal arrowed lines.
About this article
Cite this article
O’Donoghue, J., Moore, L., Bhakyapaibul, T. et al. Global upper-atmospheric heating on Jupiter by the polar aurorae. Nature 596, 54–57 (2021). https://doi.org/10.1038/s41586-021-03706-w