Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Ionic-surfactant-mediated electro-dewetting for digital microfluidics


The ability to manipulate droplets on a substrate using electric signals1—known as digital microfluidics—is used in optical2,3, biomedical4,5, thermal6 and electronic7 applications and has led to commercially available liquid lenses8 and diagnostics kits9,10. Such electrical actuation is mainly achieved by electrowetting, with droplets attracted towards and spreading on a conductive substrate in response to an applied voltage. To ensure strong and practical actuation, the substrate is covered with a dielectric layer and a hydrophobic topcoat for electrowetting-on-dielectric (EWOD)11-13; this increases the actuation voltage (to about 100 volts) and can compromise reliability owing to dielectric breakdown14, electric charging15 and biofouling16. Here we demonstrate droplet manipulation that uses electrical signals to induce the liquid to dewet, rather than wet, a hydrophilic conductive substrate without the need for added layers. In this electrodewetting mechanism, which is phenomenologically opposite to electrowetting, the liquid–substrate interaction is not controlled directly by electric field but instead by field-induced attachment and detachment of ionic surfactants to the substrate. We show that this actuation mechanism can perform all the basic fluidic operations of digital microfluidics using water on doped silicon wafers in air, with only ±2.5 volts of driving voltage, a few microamperes of current and about 0.015 times the critical micelle concentration of an ionic surfactant. The system can also handle common buffers and organic solvents, promising a simple and reliable microfluidic platform for a broad range of applications.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Fig. 1: The proposed ionic-surfactant-mediated electrodewetting mechanism, studied with a sessile drop on a conductive, hydrophilic substrate.
Fig. 2: Effect of surfactant concentration and actuation voltage on the electrodewetting.
Fig. 3: Droplet generation, transportation and splitting realized by the proposed electrodewetting.
Fig. 4: The proposed electrodewetting confirmed for a variety of liquids on bare silicon.

Data availability

Most data generated or analysed during this study are included in the published article. The rest will be available from the corresponding author on reasonable request.

Code availability

The custom-written code that detects the droplet position and defines the horizontal reference to assist measuring contact angles will be available on reasonable request. The code also allows one to measure very low contact angles (<10°).


  1. Cho, S. K., Moon, H. & Kim, C.-J. Creating, transporting, cutting, and merging liquid droplets by electrowetting-based actuation for digital microfluidic circuits. J. Microelectromech. Syst. 12, 70–80 (2003).

    Article  Google Scholar 

  2. Berge, B. & Peseux, J. Variable focal lens controlled by an external voltage: an application of electrowetting. Eur. Phys. J. E 3, 159–163 (2000).

    Article  CAS  Google Scholar 

  3. Hayes, R. A. & Feenstra, B. J. Video-speed electronic paper based on electrowetting. Nature 425, 383–385 (2003).

    Article  ADS  CAS  Google Scholar 

  4. Srinivasan, V., Pamula, V. K. & Fair, R. B. An integrated digital microfluidic lab-on-a-chip for clinical diagnostics on human physiological fluids. Lab Chip 4, 310–315 (2004).

    Article  CAS  Google Scholar 

  5. Keng, P. Y. et al. Micro-chemical synthesis of molecular probes on an electronic microfluidic device. Proc. Natl Acad. Sci. USA 109, 690–695 (2012).

    Article  ADS  CAS  Google Scholar 

  6. Cheng, J.-T. & Chen, C.-L. Active thermal management of on-chip hot spots using EWOD-driven droplet microfluidics. Exp. Fluids 49, 1349–1357 (2010).

    Article  Google Scholar 

  7. Sen, P. & Kim, C.-J. A liquid-solid direct contact low-loss RF micro switch. J. Microelectromech. Syst. 18, 990–997 (2009).

    Article  CAS  Google Scholar 

  8. Corning Varioptic Lenses (Corning, 2019).

  9. ePlex: The True Sample-to-Answer Solution (GenMark Diagnostics, 2019).

  10. VolTRAX (Oxford Nanopore Technologies, 2019).

  11. Berge, B. Electrocapillarity and wetting of insulator films by water. CR Acad. Sci. Ser. II 317, 157–163 (1993).

    CAS  Google Scholar 

  12. Pollack, M. G., Fair, R. B. & Shenderov, A. D. Electrowetting-based actuation of liquid droplets for microfluidic applications. Appl. Phys. Lett. 77, 1725 (2000).

    Article  ADS  CAS  Google Scholar 

  13. Lee, J., Moon, H., Fowler, J., Schoellhammer, T. & Kim, C.-J. Electrowetting and electrowetting-on-dielectric for microscale liquid handling. Sens. Actuat. A Phys. 95, 259–268 (2002).

    Article  CAS  Google Scholar 

  14. Raj, B., Dhindsa, M., Smith, N. R., Laughlin, R. & Heikenfeld, J. Ion and liquid dependent dielectric failure in electrowetting systems. Langmuir 25, 12387–12392 (2009).

    Article  CAS  Google Scholar 

  15. Verheijen, H. J. J. & Prins, M. W. J. Reversible electrowetting and trapping of charge: model and experiments. Langmuir 15, 6616–6620 (1999).

    Article  CAS  Google Scholar 

  16. Latip, E. N. A. et al. Protein droplet actuation on superhydrophobic surfaces: a new approach toward anti-biofouling electrowetting systems. RSC Adv. 7, 49633–49648 (2017).

    Article  Google Scholar 

  17. Nave, M. I., Gu, Y., Chen-Wiegart, Y.-C. K., Wang, J. & Kornev, K. G. Is an electric field always a promoter of wetting? Electro-dewetting of metals by electrolytes probed by in situ X-ray nanotomography. Faraday Discuss. 199, 101–114 (2017).

    Article  ADS  CAS  Google Scholar 

  18. Hu, G.-H., Xu, A.-J., Xu, Z. & Zhou, Z.-W. Dewetting of nanometer thin films under an electric field. Phys. Fluids 20, 102101 (2008).

    Article  ADS  Google Scholar 

  19. Lapierre, F., Coffinier, Y., Boukherroub, R. & Thomy, V. Electro-(de)wetting on superhydrophobic surfaces. Langmuir 29, 13346–13351 (2013).

    Article  CAS  Google Scholar 

  20. Gallardo, B. S. et al. Electrochemical principles for active control of liquids on submillimeter scales. Science 283, 57–60 (1999).

    Article  ADS  CAS  Google Scholar 

  21. He, S., Meng, Y. & Tian, Y. Correlation between adsorption/desorption of surfactant and change in friction of stainless steel in aqueous solutions under different electrode potentials. Tribol. Lett. 41, 485–494 (2011).

    Article  CAS  Google Scholar 

  22. Cho, H. J., Mizerak, J. P. & Wang, E. N. Turning bubbles on and off during boiling using charged surfactants. Nat. Commun. 6, 8599 (2015).

    Article  ADS  CAS  Google Scholar 

  23. Xu, W. et al. Lateral actuation of an organic droplet on conjugated polymer electrodes via imbalanced interfacial tensions. Soft Matter 12, 6902 (2016).

    Article  ADS  CAS  Google Scholar 

  24. Nelson, W. C. & Kim, C.-J. Droplet actuation by electrowetting-on-dielectric (EWOD): a review. J. Adhes. Sci. Technol. 26, 1747–1771 (2012).

    CAS  Google Scholar 

  25. Hare, E. F. & Zisman, W. A. Autophobic liquids and the properties of their adsorbed films. J. Phys. Chem. 59, 335–340 (1955).

    Article  CAS  Google Scholar 

  26. Mugele, F. et al. Ion adsorption-induced wetting transition in oil-water-mineral systems. Sci. Rep. 5, 10519 (2015).

    Article  ADS  Google Scholar 

  27. Annapragada, S. R., Dash, S., Garimella, S. V. & Murthy, J. Y. Dynamics of droplet motion under electrowetting actuation. Langmuir 27, 8198–8204 (2011).

    Article  CAS  Google Scholar 

  28. Sanderson, H. et al. Occurrence and weight-of-evidence risk assessment of alkyl sulfates, alkyl ethoxysulfates, and linear alkylbenzene sulfonates (LAS) in river water and sediments. Sci. Total Environ. 368, 695–712 (2006).

    Article  ADS  CAS  Google Scholar 

  29. Luk, V. N., Mo, G. C. H. & Wheeler, A. R. Pluronic additives: a solution to sticky problems in digital microfluidics. Langmuir 24, 6382–6389 (2008).

    Article  CAS  Google Scholar 

  30. Wegener, J., Keese, C. R. & Giaever, I. Electric Cell–Substrate Impedance Sensing (ECIS) as a noninvasive means to monitor the kinetics of cell spreading to artificial surfaces. Exp. Cell Res. 259, 158–166 (2000).

    Article  CAS  Google Scholar 

  31. Chokkalingam, V. et al. Probing cellular heterogeneity in cytokine-secreting immune cells using droplet-based microfluidics. Lab Chip 13, 4740 (2013).

    Article  CAS  Google Scholar 

  32. Jones, T. B., Gunji, M., Washizu, M. & Feldman, M. J. Dielectrophoretic liquid actuation and nanodroplet formation. J. Appl. Phys. 89, 1441–1448 (2001).

    Article  ADS  CAS  Google Scholar 

  33. Fan, S.-K., Hsieh, T.-H. & Lin, D.-Y. General digital microfluidic platform manipulating dielectric and conductive droplets by dielectrophoresis and electrowetting. Lab Chip 9, 1236 (2009).

    Article  CAS  Google Scholar 

  34. McHale, G., Brown, C. V., Newton, M. I., Wells, G. G. & Sampara, N. Dielectrowetting driven spreading of droplets. Phys. Rev. Lett. 107, 186101 (2011).

    Article  ADS  CAS  Google Scholar 

  35. Geng, H., Feng, J., Stabryla, L. M. & Cho, S. K. Dielectrowetting manipulation for digital microfluidics: creating, transporting, splitting, and merging of droplets. Lab Chip 17, 1060–1068 (2017).

    Article  CAS  Google Scholar 

  36. Reboud, J. et al. Shaping acoustic fields as a toolset for microfluidic manipulations in diagnostic technologies. Proc. Natl Acad. Sci. USA 109, 15162–15167 (2012).

    Article  ADS  CAS  Google Scholar 

  37. Davanlou, A. & Kumar, R. Thermally induced collision of droplets in an immiscible outer fluid. Sci. Rep. 5, 9531 (2015).

    Article  ADS  CAS  Google Scholar 

  38. Zhang, Y. & Nguyen, N.-T. Magnetic digital microfluidics—a review. Lab Chip 17, 994–1008 (2017).

    Article  CAS  Google Scholar 

  39. Beni, G. & Hackwood, S. Electro-wetting displays. Appl. Phys. Lett. 38, 207–209 (1981).

    Article  ADS  CAS  Google Scholar 

  40. Koo, B. & Kim, C.-J. Evaluation of repeated electrowetting on three different fluoropolymer top coatings. J. Micromech. Microeng. 23, 067002 (2013).

    Article  ADS  Google Scholar 

  41. Erb, R. A. Wettability of gold. J. Phys. Chem. 72, 2412–2417 (1968).

    Article  CAS  Google Scholar 

  42. Abbott, N. L., Gorman, C. B. & Whitesides, G. M. Active control of wetting using applied electrical potentials and self-assembled monolayers. Langmuir 11, 16–18 (1995).

    Article  CAS  Google Scholar 

  43. Moon, H., Cho, S. K., Garrell, R. L. & Kim, C.-J. Low voltage electrowetting-on-dielectric. J. Appl. Phys. 92, 4080–4087 (2002).

    Article  ADS  CAS  Google Scholar 

  44. Lomax, D. J. et al. Ultra-low voltage electrowetting using graphite surfaces. Soft Matter 12, 8798–8804 (2016).

    Article  ADS  CAS  Google Scholar 

  45. Stalder, A. F., Kulik, G., Sage, D., Barbieri, L. & Hoffmann, P. A snake-based approach to accurate determination of both contact points and contact angles. Colloids Surf. A 286, 92–103 (2006).

    Article  CAS  Google Scholar 

  46. Peng, L., Qisui, W., Xi, L. & Chaocan, Z. Investigation of the states of water and OH groups on the surface of silica. Colloids Surf. A 334, 112–115 (2009).

    Article  Google Scholar 

  47. Aguiar, J., Carpena, P., Molina-Bolívar, J. A. & Ruiz, C. On the determination of the critical micelle concentration by the pyrene 1:3 ratio method. J. Colloid Interface Sci. 258, 116–122 (2003).

    Article  ADS  CAS  Google Scholar 

  48. Goloub, T. P., Koopal, L. K., Bijsterbosch, B. H. & Sidorova, M. P. Adsorption of cationic surfactants on silica. Surface charge effects. Langmuir 12, 3188–3194 (1996).

    Article  CAS  Google Scholar 

  49. Dick, S., Fuerstenau, D. & Healy, T. Adsorption of alkylbenzene sulfonate (A.B.S.) surfactants at the alumina-water interface. J. Colloid Interface Sci. 37, 595–602 (1971).

    Article  ADS  CAS  Google Scholar 

  50. Ruzyllo, J. Semiconductor Glossary 2nd edn (World Scientific, 2016).

Download references


This work was supported by the National Science Foundation (grants 1711708 and 1720499), by the National Institute on Aging (grant R21 AG049918), by the Volgenau Endowed Chair in Engineering (C.-J.K.), by Ralph and Marjorie Crump for the UCLA Crump Institute for Molecular Imaging (R.M.v.D.), by the Simons Math + X Investigator Award (award 510776) (J.L.) and by the University of Massachusetts Amherst startup package (T.L.). We thank S. Seidlits and W. Xiao for helping with the fluorescence microscopy, S. Sadeghi and M. Balandeh for discussions on electrochemical measurements, J. Wang for help with buffer solutions, and A. L. Bertozzi for discussions on modelling.

Author information

Authors and Affiliations



C.-J.K. conceived the project and J.L. designed most of the work and performed all experiments. N.S.H and J.L. carried out the fluorescent experiments. T.L. and J.L. conducted the contact-angle analysis. C.-J.K., R.M.v.D. and T.L. provided overall guidance and data interpretation. C.-J.K. and J.L. prepared the manuscript and all authors contributed to it.

Corresponding author

Correspondence to Chang-Jin ‘CJ’ Kim.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Peer review information Nature thanks Frieder Mugele and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Extended data figures and tables

Extended Data Fig. 1 Contact angle measurement setup with the wire–droplet system used in the current study.

The silicon substrate sits on an XY positioning stage; the wire electrode is attached to a Z positioning stage; and two cameras, each mounted on their own XYZ stage, view two orthogonal sides of the droplet. Not drawn to scale, for clarity. All the stages are fixed on a vibration-isolation plate.

Extended Data Fig. 2 An ideal electric circuit model of the proposed electrodewetting compared with that of the electrowetting, considering an aqueous droplet placed on a conductive substrate as seen in Fig. 1.

a, For the proposed electrodewetting, a conductive substrate (Rs) is covered with a native oxide (tunnel oxide50), which is conductive (Rox). An external electric source (Vext or Iext) lets the current flow through the liquid (Il) and forms a voltage drop inside the liquid (Vl), which drives the ionic surfactant by electrophoresis. b, For electrowetting, a conductive substrate (Rs) is covered with an insulating dielectric material and a hydrophobic topcoat, which provide capacitance (Cd) and strong hydrophobicity. An external voltage source (Vext) establishes a voltage drop across the dielectric (Vd) but little voltage drop and no current across the liquid. Rl and Cl represent the resistance and capacitance of the droplet, respectively.

Extended Data Fig. 3 Experiments to support the proposed mechanism of electrodewetting.

a, Confocal microscopic images show that a fluorescent ionic surfactant (R18) is concentrated near the air–liquid interface of the droplet before actuation (red arrow), and becomes concentrated near the solid–liquid interface during the electrodewetting actuation (red arrow), corroborating that surfactant is driven to the substrate by electrodewetting. b, Steam condensation images reveal the wettable state of the substrate after blowing away (in the direction of the blue arrow) a water droplet containing DTAB. Unlike the unactuated droplet (left), the electrodewetted droplet leaves a dewettable area (right), corroborating that electrodewetting deposits surfactant on the surface. c, A water droplet with R18 was actuated to wet (by reverse electrodewetting), dewet (by electrodewetting), and wet (by reverse electrodewetting) the surface successively, and then the droplet was blown away to reveal a surfactant population map on the surface. Starting with an autophobed droplet, reverse electrodewetting (step 1, black arrow) cleans up the high-concentration R18 before electrodewetting (step 2, green arrow) deposits normal-concentration R18 (orange). Another reverse electrodewetting (step 3, red arrow) cleans up the normal-concentration R18 (orange) deposited by the previous electrodewetting, making the surface inside the droplet largely surfactant-free (blue). The fluorescence intensity on a fresh silicon substrate (that is, no surfactant) has a similar blue colour. This experiment corroborates that the deposited surfactant is removed by reverse electrodewetting actuation.

Extended Data Fig. 4 Effect of surfactant concentration and actuation voltage (Fig. 2) shown separately for each surfactant to include error bars or all data.

a-d, Contact-angle increase and dewetting time vs. surfactant concentration (left graph) and contact-angle increase and current flow vs. actuation voltage (right graph) for DTAB, TTAB, CTAB and SDS, respectively. Each symbol and error bar show an average and standard deviation of nine measurements (using about 180 images) made with three new droplets at three different locations across a wafer. Under the natural (unactuated) state, the contact angle was found to increase with surfactant concentration for all four surfactants. However, under the electrodewetted state, the contact angle was found to increase with surfactant concentration at low concentrations and decrease at high concentrations, with a maximal value in between.

Extended Data Fig. 5 Droplet evaporation prevention setup.

A glass cup was flipped upside down into a water tank to create an air pocket containing a wire, a silicon wafer and a droplet. Two varnished wires were passed through the water to connect the wire and wafer to a power source placed outside the water tank. A relay served as a switch to toggle the polarity of the current source. The silicon wafer and glass cup were mounted on stands and the water was adjusted to be higher outside the air pocket than inside. This setup slowed down the evaporation effectively, extending the droplet evaporation time, and thus the maximum testing time, from only a few minutes to 6 h, while allowing the replacement of the silicon chip and test droplet to be quick and easy.

Extended Data Fig. 6 Fabrication process of the ionic-surfactant-mediated electrodewetting device used to demonstrate the digital microfluidic operations (Fig. 3).

Not drawn to scale. The thin-down step was added only because SOI wafer with thin-enough top silicon layer was not available at the time of fabrication.

Extended Data Fig. 7 Electric actuation of a droplet atop two adjacent electrodes explained with an imaginary top wire, assuming a cationic surfactant.

a, When a droplet is actuated on the electrodewetting microfluidic device (Supplementary Video 4), it sits across a 0 V electrode and a 5 V electrode. For simplicity, we assume the droplet is symmetric and imagine an equipotential line of 2.5 V at the centre of the droplet. b, The case of a is electrically equivalent to having a 2.5 V wire in the droplet along the equipotential line. c, The case of b is electrically equivalent to having a 0 V wire and having a −2.5 V electrode and a 2.5 V electrode. We note that the left half of the droplet, where an electric field is formed from the wire (0 V) to the left electrode (−2.5 V), relates to Fig. 1b (that is, dewetting), and the right half of the droplet, where an electric field is formed from the right electrode (2.5 V) to the wire (0), relates to Fig. 1a (that is, wetting). Combining the left half (dewetting) and right half (wetting), the net effect is forcing the droplet to the right. We note that the red arrows indicate the overall direction of the electric field between electrodes and do not imply electric field intensity.

Extended Data Table 1 Electrowetting, EWOD and ionic-surfactant-mediated electrodewetting

Supplementary information

Video 1

A 3 μl droplet of 0.2 mM DTAB aqueous solution on bare silicon was actuated with around ±3 V. Because an aqueous solution with higher pH would induce more negative charges on the native oxide of silicon, autophobing by the cationic surfactant was dominant for a basic solution (pH = 11.2), masking the electrodewetting effect. For a neutral solution (pH = 6.5), autophobing was significant but not dominant, allowing the electrodewetting effect to add additional dewetting. For an acidic solution (pH = 2.3), no autophobing was found, allowing the electrodewetting actuation to fully control the wetting behavior.

Video 2

An aqueous droplet (pH ~ 2) containing 0.2 mM DTAB on bare silicon was actuated using highly excessive voltage of ~10 V with over 3 mA of current in this stress test, compared with the usual ~3 V and ~3 μA. The electrodewetting actuations continued to operate successfully even during the severe electrolysis. This robustness is a major advantage over electrowetting and EWOD devices, for which even slight electrolysis causes actuation degradation or device failure.

Video 3

To slow down droplet evaporation for the long-term test, the wire-droplet system was placed in an evaporation prevention setup described in Extended Data Fig. 5. The dewetting-rewetting cycles were performed by applying 3 μA and 2.5-3.0 V of alternating polarities. The 0.5 Hz switching was continued for > 6 hours and ended only because the droplet ultimately evaporated.

Video 4

The demonstration was obtained with an open-surface configuration (i.e., no cover plate) in air (i.e., no filler oil) on a silicon device. The electrode pads underneath the droplet were sequentially connected to 5 V or ground (equivalent to +2.5 V or -2.5 V for sessile drop) by a programmed electronic control.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Li, J., Ha, N.S., Liu, T.‘. et al. Ionic-surfactant-mediated electro-dewetting for digital microfluidics. Nature 572, 507–510 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing