Nanometre-sized objects with highly symmetrical, cage-like polyhedral shapes, often with icosahedral symmetry, have recently been assembled from DNA1,2,3, RNA4 or proteins5,6 for applications in biology and medicine. These achievements relied on advances in the development of programmable self-assembling biological materials7,8,9,10, and on rapidly developing techniques for generating three-dimensional (3D) reconstructions from cryo-electron microscopy images of single particles, which provide high-resolution structural characterization of biological complexes11,12,13. Such single-particle 3D reconstruction approaches have not yet been successfully applied to the identification of synthetic inorganic nanomaterials with highly symmetrical cage-like shapes. Here, however, using a combination of cryo-electron microscopy and single-particle 3D reconstruction, we suggest the existence of isolated ultrasmall (less than 10 nm) silica cages (‘silicages’) with dodecahedral structure. We propose that such highly symmetrical, self-assembled cages form through the arrangement of primary silica clusters in aqueous solutions on the surface of oppositely charged surfactant micelles. This discovery paves the way for nanoscale cages made from silica and other inorganic materials to be used as building blocks for a wide range of advanced functional-materials applications.
Subscribe to Journal
Get full journal access for 1 year
only $3.83 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
He, Y. et al. Hierarchical self-assembly of DNA into symmetric supramolecular polyhedra. Nature 452, 198–201 (2008).
Douglas, S. M. et al. Self-assembly of DNA into nanoscale three-dimensional shapes. Nature 459, 414–418 (2009); erratum 459, 1154 (2009).
Iinuma, R. et al. Polyhedra self-assembled from DNA tripods and characterized with 3D DNA-PAINT. Science 344, 65–69 (2014).
Afonin, K. A. et al. In vitro assembly of cubic RNA-based scaffolds designed in silico. Nat. Nanotechnol. 5, 676–682 (2010).
King, N. P. et al. Computational design of self-assembling protein nanomaterials with atomic level accuracy. Science 336, 1171–1174 (2012).
Hsia, Y. et al. Design of a hyperstable 60-subunit protein icosahedron. Nature 535, 136–139 (2016); corrigendum 540, 150 (2016).
Rothemund, P. W. Folding DNA to create nanoscale shapes and patterns. Nature 440, 297–302 (2006).
Yin, P., Choi, H. M. T., Calvert, C. R. & Pierce, N. A. Programming biomolecular self-assembly pathways. Nature 451, 318–322 (2008).
Ke, Y., Ong, L., Shih, W. & Yin, P. Three-dimensional structures self-assembled from DNA bricks. Science 338, 1177–1183 (2012).
King, N. P. et al. Accurate design of co-assembling multi-component protein nanomaterials. Nature 510, 103–108 (2014).
Zhao, M. et al. Mechanistic insights into the recycling machine of the SNARE complex. Nature 518, 61–67 (2015).
Fernandez-Leiro, R. & Scheres, S. H. W. Unravelling biological macromolecules with cryo-electron microscopy. Nature 537, 339–346 (2016).
Dai, X. et al. In situ structures of the genome and genome-delivery apparatus in a single-stranded RNA virus. Nature 541, 112–116 (2017).
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C. & Beck, J. S. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism. Nature 359, 710–712 (1992).
Sun, Y. et al. Formation pathways of mesoporous silica nanoparticles with dodecagonal tiling. Nat. Commun. 8, 252 (2017).
Ma, K. et al. Control of ultrasmall sub-10 nm ligand-functionalized fluorescent core–shell silica nanoparticle growth in water. Chem. Mater. 27, 4119–4133 (2015).
Ma, K., Sai, H. & Wiesner, U. Ultrasmall sub-10 nm near-infrared fluorescent mesoporous silica nanoparticles. J. Am. Chem. Soc. 134, 13180–13183 (2012).
Carcouët, C. C. M. C. et al. Nucleation and growth of monodisperse silica nanoparticles. Nano Lett. 14, 1433–1438 (2014).
Ma, K., Zhang, D., Cong, Y. & Wiesner, U. Elucidating the mechanism of silica nanoparticle PEGylation processes using fluorescence correlation spectroscopies. Chem. Mater. 28, 1537–1545 (2016).
Tang, G. et al. EMAN2: an extensible image processing suite for electron microscopy. J. Struct. Biol. 157, 38–46 (2007).
Xiao, C., Fujita, N., Miyasaka, K., Sakamoto, Y. & Terasaki, O. Dodecagonal tiling in mesoporous silica. Nature 487, 349–353 (2012).
Gong, Y., Veesler, D., Doerschuk, P. C. & Johnson, J. E. Effect of the viral protease on the dynamics of bacteriophage HK97 maturation intermediates characterized by variance analysis of cryo EM particle ensembles. J. Struct. Biol. 193, 188–195 (2016).
Pettersen, E. F. et al. UCSF Chimera—a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Scheres, S. H. W. RELION: implementation of a Bayesian approach to cryo-EM structure determination. J. Struct. Biol. 180, 519–530 (2012).
Rohou, A. & Grigorieff, N. CTFFIND4: fast and accurate defocus estimation from election micrographs. J. Struct. Biol. 192, 216–221 (2015).
Harauz, G. & van Heel, M. Exact filters for general geometry three dimensional reconstruction. Optik 73, 146–156 (1986).
Zandi, R., Reguera, D., Bruinsma, R. F., Gelbart, W. M. & Rudnick, J. Origin of icosahedral symmetry in viruses. Proc. Natl Acad. Sci. USA 101, 15556–15560 (2004).
Duff, D. G., Baiker, A. & Edwards, P. P. New hydrosol of gold clusters. 1. Formation and particle size variation. Langmuir 9, 2301–2309 (1993).
Sullivan, L. M., Li, L. & Lukehart, C. M. Synthesis of VO2 nanopowders. Part I. Sol–gel processing of vanadium alkoxide precursor within inverse micelles. J. Cluster Sci. 25, 313–322 (2014).
Phillips, E. et al. Clinical translation of an ultrasmall inorganic optical-PET imaging nanoparticle probe. Sci. Transl. Med. 6, 260ra149 (2014).
Westcott, S. L., Oldenburg, S. J., Lee, T. R. & Halas, N. J. Formation and adsorption of clusters of gold nanoparticles onto functionalized silica nanoparticle surfaces. Langmuir 14, 5396–5401 (1998).
Ji, B. et al. Non-blinking quantum dot with a plasmonic nanoshell resonator. Nat. Nanotechnol. 10, 170–175 (2015).
This project was supported by the National Cancer Institute of the National Institutes of Health under award number U54CA199081. Y.G. and P.C.D. acknowledge financial support from the National Science Foundation (NSF) under grant number 1217867, and Y.G. acknowledges financial support from a 2017 Google PhD Fellowship in Machine Learning. T.A. acknowledges financial support from the Ghent University Special Research Fund (BOF14/PDO/007) and the European Union’s Horizon 2020 research and innovation program (MSCA-IF-2015-702300 and MSCA-RISE-691185). M.Z.T. acknowledges fellowship support from the Ministry of National Education of the Republic of Turkey. This work used shared facilities of the Cornell Center for Materials Research, with funding from the NSF Materials Research Science and Engineering Center program (DMR-1719875), as well as the Nanobiotechnology Center’s shared research facilities at Cornell. The authors thank V. Elser, Y. Jiang and D. Zhang for helpful discussions.
The authors declare that they have submitted a patent disclosure based on this study through Cornell University.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 PEGylated silicages after cleaning, and nitrogen sorption measurements on calcined cages.
a, b, Representative dry-state TEM images, at different magnifications, of PEGylated silicages after the removal of surfactant (CTAB) and TMB (see Methods). The insets in a (black arrows) and b reveal cage-like structures, suggesting structure preservation after the removal of CTAB and TMB. c, Nitrogen adsorption and desorption isotherms of calcined silicages. After CTAB and TMB were removed, particles were calcined at 550 °C for 6 hours in air before nitrogen sorption measurements were taken. A particle synthesis yield of 67% was estimated from the weight of the calcined powder. The surface area of calcined silicages, as assessed by the Brunauer−Emmett−Teller (BET) method, was 570 m2 g−1, consistent with theoretical estimations (Methods). Scale bars in the insets in b represent 5 nm.
a, Around 19,000 single-particle cryo-EM images were sorted into 100 clusters20. b, Some of the projections (examples highlighted in a) exhibited features similar to those of simulated projections of dodecahedral cage structure. Also shown are projection models. Scale bars represent 10 nm.
a, Reconstructed dodecahedral silicage24. b, Its three most unique projections, along the two-fold, three-fold and five-fold symmetry axes. The reconstruction was obtained from a single-class calculation run by RELION 2.1, using the same set of single-particle images as for the dodecahedral cage in Fig. 3a. Visualization is by UCSF Chimera23.
Extended Data Fig. 4 A typical contrast transfer function, and determination of reconstruction resolution.
We used CTFFIND4.1.8 (ref. 25) to estimate defocus for individual micrographs or a set of micrographs, with results consistent with nominal defocus values of 1–2 μm. a, Contrast transfer function (CTF) for a defocus of 1.98 μm. Given that the first zero-crossing of the CTF occurs at 0.44 nm−1, the CTF has little effect on reconstructions unless the resolution is greater than 1/(0.44 nm−1), that is 2.27 nm. b, A Fourier shell correlation (FSC)25 computed by a standard package20 for two Hetero reconstructions that are independent, starting at the level of separate sets of images each containing 2,000 images (that is, ‘gold standard’ FSC). The resolution implied by the FSC curve (the inverse of the value of spatial frequency where the FSC curve first crosses 0.5) is 1/(0.99 nm−1), that is 1.01 nm. c, Energy function for the same pair of reconstructions as in panel b. The energy is the spherical average of the squared magnitude of the reciprocal-space electron-scattering intensity, where the denominator of FSC is the square root of a product of two energy functions, one for each reconstruction. The observation that energy has dropped by more than 10−3 times its peak value, and that the character of the curve has become oscillatory and more slowly decreasing—both by 0.44 nm−1—indicates that the resolution implied by the FSC curve is exaggerated22 and that a more conservative resolution is 1/(0.44 nm−1), that is 2.27 nm. d, FSC computed by a standard package20 for two RELION 2.1 reconstructions computed from the same images as those in panel b, from which the resolution (at 0.5 threshold) is estimated to be around 1/(0.50 nm−1), that is 2.00 nm.
a, Orientation dependence of silicage projections. Right panel, the nine different silicage projections identified by 3D reconstruction (Fig. 3) are shown. Left panel, these orientations are manually mapped onto the surface of a dodecahedron. The orientations corresponding to different projections are assigned different colours. b, Probability analysis for different silicage projections. The probability of imaging a particular projection by electron microscopy is estimated by dividing that subset of the surface area of a sphere that contains the orientations corresponding to a specific projection, by the total surface area of the sphere. c, Experimental probability of imaging different silicage projections. The probability of imaging each projection is calculated by dividing the number of single-particle images assigned to a specific silicage projection via 3D reconstruction, by the overall number of silicage single-particle images. The error bars in c are standard deviations calculated from three projection distributions, which were obtained from three independent reconstruction runs using different sets of single-particle images.
Particle-size distribution for primary silica clusters at an early stage of cage formation, obtained by manually analysing 450 silica clusters using a set of TEM images. The measured silica clusters were randomly split into three groups, each containing 150 particles. A cluster-size distribution was then obtained for each of the three groups, and the results were averaged. The error bars are standard deviations calculated from the three cluster-size distributions. A representative TEM image is included at the right. In order to quench the very early stages of cage formation, PEG-silane was added into the synthesis mixture about three minutes after the addition of TMOS, thereby PEGylating early silica structures. TEM sample preparation and characterization were as described in the Methods. Primary silica clusters with diameters of around 2 nm were identified, consistent with the proposed cage-formation mechanism.
a, b, TEM images, at different magnifications, of silica nanoparticles synthesized with (a) and without (b) TMB. Nanoparticles synthesized without TMB (b) show stronger contrast at the particle centres than do the nanocages (a), suggesting that these nanoparticles do not exhibit a hollow cage-like structure but instead are conventional mesoporous silica nanoparticles with relatively small particle sizes.
a, Survey of the gold-based synthesis, showing the absorption profile of solutions after the successive addition of HAuCl4 (orange) and THPC (blue) and then one day after the addition of K2CO3 (red); also shown is the absorption profile when the same concentration of HAuCl4 is added to the equivalent water/ethanol solution but without any CTAB or TMB (green). b, Absorption profile of a solution obtained from the silver synthesis 6 hours after the addition of K2CO3.
This gold particle exhibits lattice fringes with a spacing of 2.3 Å, consistent with the known lattice spacing between (111) planes of gold (Joint Committee on Powder Diffraction Standards no. 04-0784, http://www.icdd.com/). Scale bar represents 5 nm.
. The reconstruction was obtained from a single-class calculation by the Hetero algorithm using the same set of single particle images as was used in the class of the dodecahedral cage shown in Figure 3a.
The reconstruction was obtained from a single-class calculation by the RELION 2.1 system using the same set of single particle images as was used in the class of the dodecahedral cage shown in Figure 3a.
About this article
Cite this article
Ma, K., Gong, Y., Aubert, T. et al. Self-assembly of highly symmetrical, ultrasmall inorganic cages directed by surfactant micelles. Nature 558, 577–580 (2018). https://doi.org/10.1038/s41586-018-0221-0
A novel approach to coat silica on quantum dots: Forcing decomposition of tetraethyl orthosilicate in toluene at high temperature
Journal of Alloys and Compounds (2020)
Ultrasmall PEGylated and Targeted Core–Shell Silica Nanoparticles Carrying Methylene Blue Photosensitizer
ACS Biomaterials Science & Engineering (2020)
Engineered Cell‐Derived Microparticles Bi 2 Se 3 /DOX@MPs for Imaging Guided Synergistic Photothermal/Low‐Dose Chemotherapy of Cancer
Advanced Science (2020)
Optical Materials Express (2020)
Nano Letters (2020)