Abstract
The survival of vertebrate organisms depends on highly regulated delivery of oxygen and nutrients through vascular networks that pervade nearly all tissues in the body. Dysregulation of these vascular networks is implicated in many common human diseases such as hypertension, coronary artery disease, diabetes and cancer. Therefore, engineers have sought to create vascular networks within engineered tissues for applications such as regenerative therapies, human disease modelling and pharmacological testing. Yet engineering vascular networks has historically remained difficult, owing to both incomplete understanding of vascular structure and technical limitations for vascular fabrication. This Review highlights the materials advances that have enabled transformative progress in vascular engineering by ushering in new tools for both visualizing and building vasculature. New methods such as bioprinting, organoids and microfluidic systems are discussed, which have enabled the fabrication of 3D vascular topologies at a cellular scale with lumen perfusion. These approaches to vascular engineering are categorized into technology-driven and nature-driven approaches. Finally, the remaining knowledge gaps, emerging frontiers and opportunities for this field are highlighted, including the steps required to replicate the multiscale complexity of vascular networks found in nature.
Similar content being viewed by others
Introduction
Evolution of complex multicellular organisms requires the co-emergence of transport systems to support the metabolic needs of cells across a diverse range of organs, body types and body sizes. In vertebrates, these systems are typically characterized by a closed vascular system consisting of conduits for collection and distribution, connected by a central propulsive pump1. The complexity of vascular networks varies across and within organisms to meet the different metabolic needs of the tissues, with the most complex being hierarchical networks of branching tubular structures. In addition to delivering oxygen and blood, the vasculature regulates blood coagulation, transportation of inflammatory cells and critical cellular signalling interactions in an organ-specific manner2; thus, the vasculature plays diverse roles critical for life (Box 1).
Vascular pathology is implicated in many human diseases, with cardiovascular disease being the top cause of death and disability in the United States3. Many cardiovascular diseases disproportionately affect groups of divergent ancestries, ethnicities and sociocultural backgrounds, with serious results4,5. For example, in the United States, African Americans are more likely than white Americans to have cardiovascular complications, such as strokes, congestive heart failure or end-stage renal disease, and experience lower life expectancy6,7.
To address the substantial clinical burden of cardiovascular disease, biomedical researchers and engineers began combining vascular biology and materials science to engineer blood vessels as early as the 1960s. The first wave of vascular engineering technologies focused on fabricating single blood vessels as vascular conduits for reconstructing or bypassing vascular occlusions or aneurysms8,9,10,11,12. The earliest such conduits were composed of synthetic membranes (made of materials such as silicone, collagen and polyethylene terephthalate) seeded with cells8,11, with more recent approaches diversifying to include wrapping cell sheets around a mandrel13,14, decellularizing an engineered construct after conditioning15, or using 3D printing16. Several such conduits have progressed to clinical trials, one of which has now been implanted as a haemodialysis conduit in over 240 patients with end-stage renal disease and is currently in phase III clinical trials17, as reviewed extensively elsewhere10,12.
Fabricating a single vascular conduit has achieved some success; however, in the past few years, replicating vascular networks — that is, the entire vascular hierarchy, from large-scale (~6 mm) to small-scale (<0.1 mm) vessels — has become a key challenge in the field of tissue engineering. This challenge came to the forefront as efforts to build engineered tissues that reproduce the features and functions of native tissues became concerted in the 1980s to the present18,19,20. The field had early clinical success in replicating thin tissues such as skin; however, the construction of highly metabolic solid organs such as the liver, heart and kidney remains limited by insufficient nutrient and oxygen transport in thick tissues. This paradox is particularly important, as the largest impact on human health would be achieved by producing solid organs for clinical applications such as therapeutic treatment of end-stage organ disease21. Inspired by nature’s solution of incorporating vascular networks into solid organs, biologists and engineers alike are now working intensely to reconstruct analogous engineered vascular networks within engineered tissues for solid organ repair and replacement.
This Review discusses approaches to fabricating an entire vascular network capable of sustaining engineered tissues and organs. We summarize how our knowledge of vascular network architecture, composition and heterogeneity has evolved, and how materials advances are leading to increasingly refined multiscale and multidimensional vascular blueprints. We focus on how tissue engineers have harnessed knowledge of vascular biology to come closer to fabricating multiscale vascular networks within engineered organs and show how many of the greatest leaps towards this goal have stemmed from creative integration of diverse fields, including materials science. The focus of this Review is on engineering-driven approaches to create vascular networks, which we define broadly as all non-natural network-forming methods. We also more briefly review nature-driven approaches for vascular network assembly and highlight emerging efforts to bridge engineering and nature-driven assembly modes. Finally, we articulate some of the remaining steps required for therapeutic organ vascularization to become a mainstream clinical reality.
Building vascular networks
Our increasingly detailed knowledge of vascular network architecture and composition has made it clear that replicating the structural and biological complexities of vascular networks in engineered organs and tissues may require the integration of diverse technologies and fields of expertise.
Engineering-driven approaches
Microfabrication
The digital revolution and the subsequent rise of the personal computer industry in the 1970s and 1980s brought with it the demand for technologies that were more powerful, faster and smaller. With this demand came the microfabrication industry; the need to fabricate tiny microscale components for silicone computer chips became mainstream almost overnight. This revolution had great implications for the field of tissue engineering22, which at the time was integrating materials engineering with cell biology, but still could not achieve intricate spatial patterning of features such as those in vascular networks. Methods to spatially arrange cells and materials at the micro- and nanoscale were needed. The first publications to adapt microfabrication techniques for patterning cells both on 2D substrates and in engineered tissues emerged in the late 1990s23,24,25,26. This work quickly captured the interest and imagination of the community, giving rise to the intersection of microfabrication and tissue engineering in the vascular engineering field.
Microfabrication methods enabled the creation of relatively complex perfusable microfluidic networks, with increasingly refined networks being developed up to the present day27,28,29 (Fig. 1a). To create branching vessel-like networks, some investigators patterned photoresist on silicone wafers to create positive features of microchannel conduits and then generated a poly(dimethyl siloxane) (PDMS) mould with perfusable microchannels29. This approach enabled the replication of some features of vascular topology (connectivity and geometry of the vascular network); however, PDMS is a synthetic material that fails to provide the extracellular cues found in native vessel matrices and does not support the encapsulation of functional cells of a tissue (parenchymal cells) around the networks. Thus, subsequent methods instead created vascular patterns in PDMS, and in turn used these PDMS patterns as moulds to create micromoulded channels within more biologically relevant materials30,31,32. For example, one group developed a multistep fabrication approach to incorporate a collagen-based microfluidic network within a perfusable chip30. The in vitro network of vessels formed by this approach was used to study vessel biology and disease, and was also incorporated into engineered tissues for in vivo therapeutic applications30,32.
One limitation inherent to using microfabrication for patterning is that the topological features used for moulding restrict patterns to a single 2D moulding plane. To overcome this limitation, layer-by-layer approaches were developed33,34,35,36,37 (Fig. 1b). In these approaches, trenches or channels are typically first moulded in one layer, similar to standard microfabrication approaches (Fig. 1a). Subsequent layers are then stacked, aligned and laminated to form additional moulded layers in an iterative fashion (Fig. 1b). One such method used direct photolithography of a photopolymerizable hydrogel instead of indirectly moulding PDMS from a patterned photoresist38. Using this method, other groups assembled a cardiac tissue with an integrated vessel-like network that was surgically anastomosed by connecting the inlet and outlet channels to the femoral vein in rats39. Despite this and other important achievements, microfabrication and layer-by-layer assembly techniques remain slow and place substantial design constraints on the topologies and materials that can be used for fabrication, because patterning is performed on a planar substrate. Still, these microfabrication techniques continue to be useful, especially for in vitro studies of vessels and within the organ-on-a-chip field.
Laser degradation and bioprinting
To overcome the design constraints of microfabrication, other patterning methods have been developed that can volumetrically fabricate 3D vascular networks40. In one approach, a laser is rastered over a material to locally degrade vascular patterns within a bulk photodegradable hydrogel. Combined with multiphoton microscopy, this technique confines local degradation to a single point in 3D space, enabling the user to ‘write’ microchannel networks with complex and precise 3D features and curvature down to the capillary size scale in hydrogels40,41,42,43 (Fig. 1c). This approach has already been used to fabricate channels as small as 5 µm diameter, the scale of the smallest known blood vessels in the human body42. These channels were successfully seeded with endothelial cells through a photoablation-guided capillary ingrowth technique42. Although laser degradation is valuable for patterning relatively small regions of interest, generation of large vessels or scaled tissues with this technique alone remains prohibitively inefficient.
To address the need for scaling to create tissues of larger volume and size, 3D printing has garnered increasing attention because of its potential to rapidly fabricate volumetric vascular networks44,45,46 (Fig. 1d). Early work in 3D printing to create engineered tissues (bioprinting) mixed cells within a viscous prepolymer, and printed both cells and materials through an extrusion nozzle to create tissue constructs10,47,48. An advantage of direct extrusion printing that uses cell-laden bioinks to assemble artificial tissues voxel by voxel is its compatibility with a variety of synthetic and natural materials49,50,51,52. However, this technique has not yet led to the printing of refined vascular networks owing to limitations in both printing resolution and shear damage to cells as they are extruded. As the field of bioprinting matures, technological advances such as the ability to print with multiple materials simultaneously, development of natural and shear-thinning bioinks50,53, and improved methods for printing cells without damaging them54 may allow engineers to replicate the architecture of the native vessel matrix more closely.
As a result of the early challenges faced when directly printing cells, strategies to print ‘sacrificial’ materials were developed to create vascular network architectures that are subsequently solidified and then embedded within a larger hydrogel54,55,56,57. This approach enables cells to be embedded in the larger encasing hydrogel, as opposed to in the printed network itself55. The sacrificial material is then dissolved to expose microfluidic vascular networks in the shape of the printed network, which can also later be seeded with cells57. Various sacrificial inks have been used for this approach, including carbohydrate-based glass57,58, the copolymer Pluronic F127 (refs55,56) and gelatin54,59. Each of these materials offers tradeoffs in printability, print resolution and utility for fabricating complex 3D vascular topologies.
The limited print resolution of extrusion bioprinting has historically impeded its application for the construction of conduits smaller than large arterioles (~200 μm). However, a creative modification reversed the sacrificial printing process, in a technique called freeform reversible embedding of suspended hydrogels (FRESH), involving a bioink printed within a dissolvable gelatin support bath. The second-generation version of this technology, FRESH 2.0, enabled printing of acellular collagen structures as small as 20 μm in diameter60. This technique has been used to fabricate a perfusable multiscale vascular network to mimic coronary vasculature, with lumens as small as 100 μm in diameter60. Although this was a considerable leap forward in the resolution of acellular extrusion bioprinting, direct printing of cells still requires substantially larger nozzle sizes and thus remains lower resolution (for example, approximately 10 times the diameter of a cell). Furthermore, a remaining challenge with extrusion printing for vascular network formation is that extrusion is most commonly performed by rastering across a volume, and thus is relatively slow, which makes it tedious to fabricate large networks. Although emerging technologies may ultimately address this constraint61, it currently necessitates tradeoffs between fabrication time and tissue scalability.
Stereolithography (SLA) printing offers an entirely different bioprinting approach that confers additional advantages for scalability62,63,64. By projecting an x–y plane of light within a photopolymerizable hydrogel precursor, SLA printers rapidly construct volumes, since they print volumetric pixels (voxels) plane by plane, as opposed to voxel by voxel. The utility of SLA for bioprinting was initially constrained by the penetration of light through sequential printed layers, which prevented the printing of many details and topologies characteristic of volumetric vascular networks45. The discovery that a biocompatible food-safe dye could be added to the prepolymer bath to limit light penetration has enabled the printing of thousands of layers and fabrication of perfusable vascular networks with complex entangled topologies. SLA printing has been used to model the interconnected 3D architecture of a lung alveolus and the integrated branching tubular network of an engineered liver tissue, demonstrating the ability of this approach to recapitulate complex natural topologies62. Yet, despite considerable progress in the fabrication of vascular topologies, this approach currently remains limited to ~300 μm print resolution. Further innovations might overcome this limitation.
Advances in volumetric fabrication methods such as laser degradation and bioprinting have energized the community and brought us closer to the possibility of fabricating vascular networks within ‘3D-printed organs’. Although each technology still requires tradeoffs in terms of materials, resolution, print time or scalability, even in their current forms these technologies can be useful for organ-on-a-chip technologies. The rapid rate of progress in this field and the potential to combine different technologies make us optimistic that technological developments will lead to the fabrication of multiscale vascular networks in the future.
Materials considerations
The compatibility of the materials used in each engineering technology is an important consideration when fabricating vascular networks. These materials have historically been categorized by whether they are naturally derived or synthetic hydrogels, although notably the latest work focuses on developing new materials with both natural and synthetic elements. Accordingly, these categories represent the far ends of a spectrum, between which lie a wide range of hybrid materials for fabrication.
Natural matrices such as collagen, fibrin, decellularized extracellular matrix (ECM) or Matrigel provide cell-adhesion sites, contain native signalling capabilities and can be degraded by cellular processes to permit the remodelling of the hydrogel. Microfabrication30,65 and extrusion bioprinting60,66 have been used to create perfusable vessels in some natural matrices, although the material properties define how compatible a given natural polymer is with each technology. For example, microfabrication techniques such as micromoulding necessitate that materials retain topographic features after the mould is removed, as well as during subsequent culture and under pressure or shear. Thus, stiffer materials (those with higher elastic moduli) are more commonly used for these applications (such as >10 mg ml−1 fibrin or 5–6 mg ml−1 collagen). Similarly, the printability, or ability of a material to both be printed and retain the intended form, known as shape fidelity, affects the choice of material for extrusion printing. Material parameters that affect printability primarily include deformation and flow behaviour determined by a material’s viscosity, elastic recovery and shear stress67,68. Physical properties such as contact angle and surface tension will also affect printability68,69. Many materials used in extrusion printing either naturally have, or are designed to have, shear-thinning properties, such that material viscosity decreases under shear stress as it travels through the printing needle.
Conversely, light-based patterning methods such as layer-by-layer photolithography, multiphoton laser ablation and SLA bioprinting require that materials are photoactive. Therefore, traditionally materials developed for use with these techniques were largely based on synthetic polymers. For example, the early photopatterning field used synthetic poly(ethylene glycol)-based materials with photo-crosslinkable moieties, such as poly(ethylene glycol) diacrylate (PEGDA)62,63,64. When exposed to light in the presence of a photoinitiator, these materials become covalently and physically crosslinked70,71,72. Both the choice and concentration of photoinitiator are critical to the material’s cytocompatibility and cell survival73.
Although PEGDA and similar synthetic polymers are photoactive, they lack the bioactive signals provided by natural ECM and thus poorly support living cells in engineered vascular networks or the bulk tissue surrounding these networks. To address this limitation, materials scientists functionalized synthetic polymers to include some natural ECM features, which became some of the earliest hybrid biomaterials74. These features include the addition of enzyme-degradable linkages75 and peptide moieties such as the Arg-Gly-Asp (RGD) cell-adhesion recognition signal76, the principal epitope found in the most abundant ECM molecules during embryonic vascular development77. Incorporating bioactive molecules within synthetic matrices aids the survival, functionality and remodelling of diverse cellular populations, including endothelial cells that line the blood vessels and mural cells that support them78.
Notably, natural materials have also been modified to incorporate non-natural control features associated with synthetic materials, such as photoactivity, to render them compatible with various biofabrication strategies. For example, to equip the natural material gelatin with photoactivity, gelatin macromers can be synthetically modified with methacrylate functionalities to produce gelatin methacrylate (GelMA). When exposed to light in the presence of a photoinitiator, GelMA polymerizes to form a crosslinked hydrogel79.
Innovative materials have been critical for many of the technological advances in engineering vascular networks. Often, such materials have been borrowed and creatively adapted for tissue engineering from other industries, such as the food industry. This includes the introduction of gelatin, which is produced by the partial breakdown of the triple-helical structure of collagen and was originally a by-product from the meat processing industry34,79,80,81,82. Other examples of materials coopted from the food industry include carbohydrate glasses (such as sugar formulations) for 3D printing sacrificial vascular networks57,58 and the addition of food-safe dyes to hydrogel precursors to block the transmission of unwanted (out of plane) light in multilayer SLA printing62.
Despite these groundbreaking technological advances and the materials that have enabled them, engineering-driven technologies still fall short of replicating the composition of native vessels. Arguably one of the most important remaining challenges is the need to replicate vascular hierarchy at the cellular and molecular levels, not only the dimensional and architectural levels that have so far been the focus of most engineering-driven approaches. At present, most engineered vascular networks contain only a single population of endothelial cells that form a single confluent layer on the inner surface of the channels. Some groups have added stromal cells or pericytes to the matrix surrounding the vascular channels, but a perivascular coating that functions to control vascular tone has not yet been achieved83,84. We expect that new materials will continue to drive progress in engineering-driven construction of vascular networks. Meanwhile, to more closely replicate the cellular aspects of vascular networks in human tissues, others have taken an entirely different nature-driven approach.
Nature-driven approaches
Self-assembled vascular networks
In contrast to engineering-driven methods, biology-driven approaches rely on the inherent capacity of cellular communities to undergo morphogenesis and self-assemble into vascular networks. This field was propelled by the observation in 1988 that endothelial cells cultured in a 3D laminin and collagen matrix have the capacity to self-assemble into vessel-like networks in vitro85. Since then, other matrices, including fibrin86, collagen87 and hyaluronic acid88 hydrogels, have been exploited to support the self-assembly of endothelial cells into vessel-like networks. Remarkably, this process can also be induced in vivo by seeding endothelial cells in natural, namely fibronectin and collagen89, or synthetic, namely poly(lactic-co-glycolic acid) (PLGA) and poly(l-lactic acid) (PLLA)90, hydrogel scaffolds implanted in immunodeficient mice. The resultant self-assembled endothelial networks anastomosed with host vessels and became perfused with blood89,90.
Although early studies demonstrated the potential power of self-assembly, vessels derived solely from endothelial cells were unstable and prone to regression over time91. Natural blood vessels are formed and stabilized through the association of smooth muscle cells or pericytes with the endothelium, and, similarly, perivascular support cells can stabilize implanted engineered vascular networks in vivo91,92 (Fig. 2a). Co-seeding mesenchymal cells and endothelial cells in a fibronectin and collagen scaffold enabled the formation of a stably perfused graft-derived vessel upon scaffold implantation91. Stromal cells also support and even enhance vascular network self-assembly both in vitro and upon implantation in other material settings, such as in fibrin93 or PLGA and PLLA hydrogels94, and even in ‘scaffold-free’95 situations, in which tissues are composed only of the cells and the matrix these cells secrete. Self-assembling networks supported by stromal cell inclusion have also been used to support parenchymal cells for a variety of translational organ fabrication applications, including for skeletal muscle94, cardiac96 and hepatic93 tissue engineering.
Over the past decade, much of the self-assembly field has turned its focus towards creating more physiologically relevant vascular networks in vitro by incorporating microenvironmental factors such as controlled perfusion. Most of this work has been performed within microfluidic platforms29,97. For example, incorporating angiogenic growth factors or stromal cells with endothelial cells in microfluidic chips can induce endothelial sprouting or self-assembly to generate stable and perfusable vascular networks with patent lumens98,99,100. Formation of vascular plexi can be enhanced by transiently reactivating transcription factors associated with a foetal cell state in endothelial cells before their incorporation in microfluidic platforms101. Such models have been used to screen therapeutic strategies for treating diseases, including cancer97,102, and for penetrating highly selective endothelia such as the blood–brain barrier of the cerebral vasculature103.
Organoids
An emerging area that also makes use of self-assembly is the creation of vascularized organoids, 3D mini-organs up to ~150 μm in diameter that replicate many of the developmental, structural and functional properties of their full-sized counterparts104,105. Organoid vascularization is particularly interesting, as during embryonic development organogenesis of many organs (such as the liver106, pancreas107 and lungs108,109) occurs concordantly with vascularization. Most efforts to vascularize organoids in vitro have taken either a co-culture approach of mixing endothelial cells with organ-specific cells110,111 or a co-differentiation approach using mesodermal precursors that can differentiate into various vascular cell types during organoid maturation112,113. Although both of these methods enable the formation of endothelial tubular networks during organoid culture, perfusion of these self-assembled networks surrounding organoids in vitro remains challenging105. Multiple groups have demonstrated that in vivo implantation of these ‘prevascularized’ organoids leads to rapid perfusion of the preassembled vascular network and further organoid maturation111,112,114.
Most methods of creating self-assembled networks have generated vessel sizes that range from capillary to arteriole equivalents (diameter 5–50 μm)115. Producing the multiple levels of the vascular structural hierarchy through these approaches has remained challenging. One report suggests that this vascular scaling and structural limitation could be overcome by creating blood-vessel organoids112. For example, blood-vessel organoids have been created from induced pluripotent stem cell (iPSC)-derived endothelial cells in vitro (Fig. 2b). On implantation in the kidney capsule of immunodeficient mice, these organoids self-assembled in vivo to form a perfused hierarchical network that included arteries, arterioles, venules and capillaries. The success of this approach suggests that self-organized systems based on vascular organoids have the potential to replicate vessel hierarchy112. As these studies required that the tissues be implanted in vivo for full maturation of self-assembled vascular networks, elucidating these cues and replicating them in vitro would be a major step towards vascularized systems that replicate the vascular hierarchy in vitro.
In addition to their potential utility in artificial tissues, vascular networks created from human blood-vessel organoids could present new opportunities for disease modelling and drug discovery. Such organoids have been used to identify new therapeutics in both diabetes112 and SARS-CoV-2 infection116. In these two examples, human blood-vessel organoids reproduced features of the human disease and were used to test potential compounds for future clinical use.
Materials considerations
The choice of scaffold material in which to embed endothelial cells is essential for aiding the self-assembly of vascular networks in both randomly dispersed endothelial cell suspensions and within organoids. Contrary to technology-driven approaches, most early matrices used in this field were derived from natural polymers such as Matrigel85, fibrin117 and collagen118. The main advantage of such natural polymers is that they contain adhesive ligands and have remodelling capabilities, which collectively support vascular morphogenesis and self-assembly119.
Despite their biological advantages, natural hydrogels can be difficult to manufacture and are subject to natural lot-to-lot variability. In particular, culture of organoids is frequently reliant on Matrigel, a chemically undefined ECM mixture derived from mouse tumour cells, which contributes to issues of replicability and translatability120. Additionally, the complexity of many natural polymers makes their chemical or mechanical modification more challenging, restricting the ability to further tune these materials for improved performance. Nevertheless, natural materials still have great utility and remain routinely used today, especially for vascular self-assembly.
To address some of the challenges with natural materials, several groups have developed fully synthetic or hybrid materials that mimic at least some of the angiogenic features of the native matrix. For example, the tunable and unique synthetic environment of hyaluronic acid-based hydrogels, combined with soluble angiogenic factors, promotes the vascular differentiation of human embryonic stem cells121. Subsequent studies demonstrated the success of differentiating pluripotent stem cells and creating vascular networks via self-assembly within implantable hyaluronic acid hydrogels122.
The elastic modulus of the matrix within engineered tissues also affects cellular behaviour, including the self-assembly of endothelial cells. One method used to tune hydrogel stiffness relies on increasing the density of the matrix, although notably both stiffness and ligand density change using this approach. Interestingly, increasing the density inhibits endothelial sprouting in 3D hydrogels123, whereas increasing the stiffness independent of density has the opposite effect124. These results suggest that more work may be needed to isolate the effects of material stiffness from other properties such as ligand density. Beyond effects on angiogenic sprouting behaviour, tuning the matrix stiffness may also improve the control of vessel structure. For example, altering the matrix stiffness independent of pore size or density controls the lumen size of self-assembled vessels in a collagen gel125. Stiff gels (~20,000 Pa) promoted the formation of larger, multicellular lumens, whereas soft gels (~5,000 Pa) had dense, thin vessel networks125.
An interesting development is the emergence of dynamic hydrogels that can rapidly change their viscoelastic properties in response to the traction forces exerted by encapsulated cells, thereby mimicking the mechanosensitive properties of natural tissues126. These cell-responsive, dynamic hydrogels aid the formation of self-assembled vascular networks in vitro and in vivo by promoting contraction-induced integrin clustering126, findings that point to the importance of two-way communication between cells and their extracellular environment.
Despite these efforts to identify an optimal material for supporting the formation of vascular networks, cells also secrete matrix molecules and modifiers that degrade and replace the synthetic or natural matrices over time. Thus, the initial matrix material will differ from that which evolves in the absence of intentional control not just of the ECM, but also of the cells themselves. Future developments for engineering self-assembled vascular networks may seek to aid cell–ECM communication by not only providing appropriate biochemical cues, but also adapting their physical and chemical properties in response to cell-provided cues.
Emerging frontiers
In the past few decades, considerable progress has been made in vascular engineering. Yet, even with these transformative advances, achieving the hierarchy, heterogeneity and function of vascular networks remains out of reach. Here we articulate the limitations of current technologies, what future developments are needed to advance the field, and what knowledge and tools are required.
Dimensional and cellular hierarchies
Fabricating vascular networks that replicate the hierarchical organization of native vasculature has become one of the pre-eminent goals of vascular engineering. So far, most technology-driven approaches have focused on achieving the dimensional hierarchy of the vasculature (Fig. 3a,b), with the goal of constructing branching networks that seamlessly connect ~5 mm (artery-sized) to ~10 μm (capillary-sized) channels. Although this goal remains elusive, laser degradation and bioprinting have taken the field closer to creating hierarchies of dimensional scales41,45.
In addition to recreating hierarchies of scale, we are likely to need to simultaneously recreate hierarchies of vessel cellular composition, morphology, phenotype and function (Fig. 3a,c). For example, arteries are defined not only by their size (>0.1 mm), but also by their medial layer, rich in elastin and smooth muscle cells, which can withstand high pulsatile pressures. Capillaries, by contrast, require single-layer endothelial walls to allow gas exchange127. Most bioprinted channels have dimensions of >0.1 mm, similar to the dimensions of an artery or large arteriole. However, these channels are typically lined with only a single layer of endothelial cells, which resembles the structure of a capillary. Such vessels may ultimately fail to perform the physiological function of either arteries or capillaries. Thus, although methods such as bioprinting can spatially pattern endothelial cells to take up specific positions relative to other cell types, work to generate multilayer vessels at appropriate size scales remains largely in its infancy128.
On the other hand, self-assembled vascular networks and blood-vessel organoids more closely replicate native vessel structure, especially for microvessels, than do networks built with technology-driven approaches112. Yet these self-assembly methods do not easily allow the control of hierarchical dimensions or topology, leading to irregular network geometries that bear little topological resemblance to healthy vascular beds. Although implanted self-assembled vessels rapidly anastomose with the host following implantation, the often tortuous geometries of these vessels can make them prone to premature thrombosis129,130.
In the future, the field will need to address these limitations. We envisage approaches that combine various technological tools with self-assembly. To this end, one emerging body of hybrid approaches seeks to exert some level of exogenous control over biology-driven network assembly. These strategies typically use material or architectural cues to guide or direct vessel formation131,132,133,134,135,136. One such method uses micropatterning to spatially deposit endothelial cells and collagen fibres to create preformed ‘cords’ within engineered tissues in vitro137. On implantation, these cords act as guides for the assembly of perfused, chimeric host–graft vessels along the axis of each cord31. As the vessels assemble around these cords in vivo, the first structures to appear resemble those occurring in embryonic lumenogenesis138. Endothelial cells also respond to the topographic features of the underlying basement membrane139,140,141. As this field moves forward, engineers should consider in what situations vascular networks should be specified or guided using engineering technology, and in what situations they should relinquish control to biology-driven processes. Hybrid strategies that harness the power of biology while maintaining control over vessel architecture may empower the field to address this problem.
Organ-specific endothelial subtypes
Many groups in the field of engineering vascular networks, especially those using technology-driven approaches, have relied on readily available primary endothelial cells such as human umbilical vein endothelial cells to provide the cell source for engineered vessels. However, an increasing appreciation of endothelial cell heterogeneity is motivating engineers to seek biologically more appropriate cell sources for engineering vascular networks (Fig. 4). This includes the need to obtain different endothelial cell subtypes that compose a given vascular bed (such as arterial and venous endothelial cells), as well as obtaining further organ-specific endothelial cells that vary in both phenotype and function (Box 2).
Unfortunately, organ-specific primary human endothelial cells remain difficult to obtain, and their clinical relevance is limited. Moreover, organ-specific primary endothelial cells exhibit large variability in key abilities, including in their capacity to self-assemble. These cells also have considerable plasticity, meaning that they are capable of readily changing phenotype in response to their microenvironment43. More work is needed to identify environments that support the maintenance of particular endothelial subtypes142. A potential source of organ-specific human cells may be endothelial cells derived from human iPSCs with varying subtype identities that can be scaled for product development. An emerging body of work has offered protocols to differentiate cells that exhibit some tissue-specific functions and organotypic phenotypes, through in vitro directed differentiation protocols or in vivo specification within an appropriate tissue environment143,144,145,146. An alternative approach transiently reprogrammes normally quiescent adult endothelial cells to acquire an angiogenic, more foetal-like, phenotype101. This approach can be used with adult endothelial cells from a variety of organs, although it remains to be seen whether these reprogrammed cells fully retain their organ-specific phenotype.
Moreover, iPSC-derived endothelial cells that are not themselves organ-specific have also been co-cultured with other organ-specific cell populations. Several groups have worked to mimic aspects of the brain microcirculation (for example, the blood–brain barrier), by co-culturing iPSC-derived endothelial cells and human brain cells, such as pericytes and astrocytes, within perfusable microfluidic platforms136,147,148,149,150. Engineers of the future will almost certainly need to consider including heterogeneous populations of both endothelial cells and support cells to achieve vascular networks that support organ-specific functions.
Crosstalk between cell types
Although most cellular work in vascular network engineering has focused on endothelial cells, replicating the phenotypic heterogeneity of non-endothelial cell types is also likely to be important. For example, stromal or mural cells surrounding the vasculature are of critical importance to vascular functions, and their specialization also contributes to tissue-specific microvascular identity151. In addition, parenchymal cells, the functional cells of the tissue, often interact with vascular cells to influence vascular structure and functions during both development and homeostasis. The parenchyma supports vascular identity, generates angiogenic factors and drives vascular ingrowth152,153. At the same time, vascular cells generate tissue-specific angiocrine factors that support the development and function of parenchymal cells2. Thus, for vascular networks to retain their structure and function, they may need to be engineered concordantly with the parenchymal functional tissue elements of a given organ. Defining and obtaining appropriate perivascular and parenchymal cells will be necessary to capture the complete cellular diversity of natural vessels in different tissues.
Endothelial cells lining the vasculature also interact constantly with circulating cells, and their interactions with platelets, leukocytes and even red blood cells are key events in inflammation and immunity154 (Fig. 4a). Circulating platelets carefully guard endothelial cell integrity; when stimuli are present, platelets adhere to activated endothelial cells and trigger inflammation, leading to consequences such as leukocyte extravasation, change in vessel permeability or vascular tone, thrombosis, degradation of the ECM, and angiogenesis154. Some of these functions have also been demonstrated in engineered microvessels30,155. In inflammation, endothelial cells can control the number and types of immune cells that extravasate into the interstitium. Organ-specific endothelial cells carry different adhesion molecules that enable homing of immune cells into specific vascular beds.
Some immune cell types, including neutrophils, macrophages, T cells and even B cells, play a role in orchestrating vessel organization and the emergence of hierarchical structure during embryonic development, making them potentially important for vascular self-assembly. For example, yolk-sac-derived macrophages are associated with vessel formation in organogenesis of testes156 and brain development157,158. These macrophages associate with endothelial cells and promote the formation of the vascular plexus. They also mediate vascular pruning, connection and reorganization156. Immune cells also contribute to vascular anastomosis by serving as endothelial tip cell-chaperones157, adopting pericyte-level interactions159 and remodelling vessel structures160. However, in addition to the supportive role that immune cells can perform in vascular formation, we note that immune cell presence and surveillance also govern vessel anastomosis and graft rejection. Thus, although we must consider the source of each cell type used to construct engineered vascular networks, we must also consider the interactions of antigen-presenting cells and T cells within the vasculature. Immunological activation and/or clearance of incompatible cells is likely to occur if the cell sources are not immunologically compatible.
Further, when modelling vasculature in vitro, one essential but often missing component is the circulating plasma and blood cells. These missing components are likely to be responsible for the gap between engineered vasculature in vitro and in vivo. Supplementation with blood proteins and/or blood cell types (including white blood cells and platelets) would be important to promote vascular maturation158 and better mimic vasculature in vivo. Including these circulating cells will be important when engineering models in the future to better shape the vascular hierarchical structure and promote vessel maturation.
Finally, most vascular network engineering so far has overlooked lymphatic vessels (Fig. 4a), which return interstitial arterial fluid and tissue metabolites into the circulation161. Increased understanding of the role of lymphatic vessels in development, homeostasis and disease will be important for engineering vascular networks. Emerging work is already looking towards building human lymphatic vessel networks using both technological and self-assembly-based approaches162,163.
Accounting for flow and pressure
The fact that vascular perfusion is needed for the delivery of nutrients and oxygen in vivo is a reminder that vessels in the body are also subjected to constant haemodynamic forces that are sensed by mechanoreceptors on the surface of endothelial cells164. The response of endothelial cells to blood flow within the vessel regulates many important vascular functions, including vessel stability and angiogenesis164. For example, persistent high blood flow may induce endothelial remodelling to enlarge lumens, and conversely, persistent decreased flow can induce vascular network remodelling, with some vessels regressing or closing165. Furthermore, interstitial fluid flow, driven primarily by plasma leaving the capillary walls and draining into the lymphatics, plays a critical role in regulating normal tissue function and homeostasis166,167. Indeed, the formation of both blood and lymphatic capillaries can be enhanced by the presence of interstitial flow167.
Progress in microfabrication and bioprinted vascular networks has enabled the methodical introduction of fluid flow into the networks so that the role of perfusion in vascular biology can be explored32,168,169. For example, controlled perfusion of microfabricated vessels showed that laminar flow improves endothelial barrier function and vessel stability by signalling through the mechanosensor NOTCH1 (refs164,170,171).
In addition to being used to develop our understanding of the regulation of vessel permeability, microfabricated vascular networks have also been used to study how flow and shear stress influence angiogenic sprouting172. Controlling the force and direction of flow within vascular networks can induce or inhibit sprouting and direct the orientation of resultant sprouts172,173. Strategic control of flow direction within engineered networks has even been used to pattern angiogenic growth. Studies demonstrating that endothelial cells respond to torsion within helical vessel constructs highlight the need to model complicated physiological flow patterns in vitro174. These studies suggest that replicating physiological flow in engineered networks in vitro (such as for organ-on-a-chip applications) will improve endothelial function and more closely approximate the biology of healthy vessels164,170.
Another external force that cells regularly experience is cyclic stretch and relaxation. Although predominantly exposed to blood shear stress in the direction of blood flow, endothelial cells are also subjected to cyclic circumferential stretch caused primarily by pulsatile pressure tangential to the direction of flow. Cells in 2D in vitro environments can respond to mechanical stretching by reorienting themselves in well defined alignments that are dependent on the mechanical stimuli175,176,177. Under cyclic stretch in a 3D biomaterial construct, vascular networks orient themselves perpendicular to the stretching direction, whereas under static stretch, networks orient themselves parallel to the stretching direction177. Harnessing tissue-level mechanosensitivity may thus aid the generation of 3D vascular networks with a well defined orientation.
In addition to in vitro applications, exposing engineered vessel networks to flow before implantation may have important translational implications for the use of engineered tissue therapies in organ repair. In one study, perfusing microfabricated vessel networks in engineered tissues in vitro, prior to their implantation, improved the functional self-assembly and perfusion of these vascular networks after they had become integrated on the hearts of rats32. One of the main challenges in this field will be to develop refined methods to introduce, ensure and measure vascular perfusion in engineered tissues, both in vitro and after tissue implantation.
The role of the host
Harnessing the biology of the host — that is, the animal into which an engineered tissue is surgically implanted — has been a major element of engineering vascular networks since the beginning of this field. Some of the earliest strategies to vascularize engineered tissues relied on stimulating vascular ingrowth from the host into a tissue graft by releasing angiogenic growth factors that were crosslinked or embedded in particles in the engineered tissue132,133,134,135,136. Later systems made further use of stimuli-responsive materials engineered to release growth factor payloads in response to environmental cues (such as pH and enzymatic activity) or external cues (such as small molecules, ultrasound178,179, heat180 or magnetic fields181). In the past 20 years, the tissue engineering field has often used the intrinsic capacity of grafted human endothelial cells to self-organize into blood vessels that anastomose with host vessels, to carry blood upon tissue implantation31,32,94. This process of host–graft vascular integration is thought to occur through a mechanism in which the graft-derived endothelial cells wrap around host vessels and locally degrade the basement membrane by secreting matrix metalloproteinases, which enables graft-derived endothelial cells to infiltrate the host vessel and divert blood to the graft182.
Such host-driven technologies have been enormously powerful for the field, and much of the progress in engineering vascular networks depends on the host biology to do some of the engineering work. We caution that emerging work demonstrating variability in graft–host vascular anastomosis across different hosts183 suggests that the field may need to better understand the role of the host, including details like immune, neuronal and endocrine interactions, as well as host species, strain and model, in these processes (Fig. 4b). In other words, just because a host-driven technology works well in one host does not mean it will work the same way in a different host model system.
The issue of host variability will become increasingly important as more engineered tissue strategies progress to the clinic. Translation requires that therapeutic tissues are first tested in animal species with increasing similarity to humans, thus introducing variables such as host species, strain and immune status. Translation is also likely to entail adapting tissues with engineered vascular networks for various disease settings. Unlike the relatively young animals commonly used for the initial development of engineered vascular networks, the patient populations most in need of tissue therapies are likely to have ageing and diseased vasculatures184,185,186, and in many cases pathological host environments such as scarring caused by myocardial infarction187,188. The field will benefit from careful consideration of animal models and host factors at early stages of technology development, so that these strategies can be adapted for varying host environments.
Relying entirely on vascular infiltration by the host to achieve anastomosis is also inherently limited by a delay in perfusion that leaves vulnerable cells deprived of oxygen. An alternative is to achieve instantaneous perfusion through surgical anastomosis between graft and host vessels, such as by constructing multiscale vascular networks with larger conduits that can be surgically anastomosed to host vasculature189. This approach has been used with some success to achieve instantaneous perfusion within engineered tissues, although more work in this area is needed189,190. Further development of this approach may allow the convergence of technologies used in large tissue-engineered blood vessels with advances from the engineered microvascular field. We also envisage future hybrid technologies that blend progress in controlled release, nanotechnology and synthetic biology191,192 with technology-driven approaches for engineering vascular networks, to move towards controlling host biology to assemble vascular networks in engineered tissues.
Developing multidimensional blueprints
The architectural, cellular and molecular features of vascular networks are spatially patterned at scales ranging from subcellular to whole organ levels, with known heterogeneity across different organs. Yet even the most advanced maps of human organ vasculature still do not incorporate the vasculature’s full scale, dimensionality or heterogeneity. The lack of comprehensive organ-specific vascular blueprints makes it challenging for engineers to build and rigorously evaluate engineered vascular networks.
Many vascular network features have been uncovered using fluorescence, light or electron microscopy coupled with 2D histology. Other methods that capture 3D architectural features, such as magnetic resonance imaging and microcomputed tomography, often have limited fields of view and do not visualize the diverse populations of cells that make up the vasculature193,194. Recent breakthroughs that conflate materials science with tissue imaging could address these gaps. For example, advances in tissue clearing reagents and methods that remove lipids, pigments and/or calcium phosphate from tissues and match refractive indices195,196,197 render the tissue nearly transparent, enabling microscopes to ‘see’ deeper into tissues198. Combined with confocal or light-sheet microscopy, tissue clearing has enabled 3D visualization of the vasculature of entire mouse organs and large swaths of human organs with unprecedented cellular and even subcellular detail199 (Fig. 5). To further push the resolution boundaries of these maps, other materials-driven solutions such as expansion microscopy aid in superresolution of structures on the nanoscale200, by using an expandable polymer to physically increase sample size before imaging.
In addition to vascular architecture, the recent growth of transcriptomics technologies such as single-cell sequencing has ushered in a flood of new molecular data201,202,203,204. Such studies have led to an increased appreciation for the complex heterogeneity of vessels across organs and shed further light on how vascular cells exist in constant two-way communication with other cells, matrix components and small molecules in their local environment205. Further advances in materials have led to remarkable progress towards integrating this molecular information into maps of tissues, such as spatial transcriptomic approaches using nucleic-acid barcoding160,206,207,208,209,210. Continued refinement of these technologies and development of analogous methods for spatially resolved proteomics, matrisomics and metabolomics will push the field closer to achieving comprehensive molecular blueprints of vascular networks across organ systems. Ultimately, multiscale and multidimensional maps of vascular networks across organs that incorporate different types of architectural, cellular and molecular information — from subcellular to the dimensional scale of organs — will equip engineers with the blueprints needed to build refined human vascular networks.
Conclusions
From its beginning, the engineering of vascular networks has risen by integrating diverse and often disparate disciplines. This field has made substantial progress over recent decades, yet much remains to be done. By intentionally converging diverse expertise and experience, we will generate innovative science that will ultimately enable us to reach the elusive goal of engineering the complexity of vascular networks. Transformative progress over the past few years shows us that what was once thought to be science fiction is now becoming increasingly achievable.
References
Monahan-Earley, R., Dvorak, A. M. & Aird, W. C. Evolutionary origins of the blood vascular system and endothelium. J. Thromb. Haemost. 11, 46–66 (2013).
Rafii, S., Butler, J. M. & Ding, B.-S. Angiocrine functions of organ-specific endothelial cells. Nature 529, 316–325 (2016).
Virani, S. S. et al. Heart disease and stroke statistics — 2020 update: a report from the American Heart Association. Circulation 141, E139–E596 (2020).
Ebong, I. & Breathett, K. The cardiovascular disease epidemic in African American women: recognizing and tackling a persistent problem. J. Womens Health 29, 891 (2020).
Cooper, R. et al. The prevalence of hypertension in seven populations of west African origin. Am. J. Public Health 87, 160–168 (2011).
Islam, S. J. et al. Cardiovascular risk and resilience among black adults: rationale and design of the MECA study. J. Am. Heart Assoc. 9, 15247 (2020).
Lackland, D. T. Racial differences in hypertension: implications for high blood pressure management. Am. J. Med. Sci. 348, 135–138 (2014).
Weinberg, C. & Bell, E. A blood vessel model constructed from collagen and cultured vascular cells. Science 231, 397–400 (1986).
Sparks, C. H. Development of a successful silicone rubber arterial graft. Ann. Thorac. Surg. 2, 585–593 (1966).
Song, H. H. G., Rumma, R. T., Ozaki, C. K., Edelman, E. R. & Chen, C. S. Vascular tissue engineering: progress, challenges, and clinical promise. Cell Stem Cell 22, 340–354 (2018).
Herring, M., Gardner, A. & Glover, J. Seeding endothelium onto canine arterial prostheses: the effects of graft design. Arch. Surg. 114, 679–682 (1979).
Niklason, L. E. & Lawson, J. H. Bioengineered human blood vessels. Science 370, eaaw8682 (2020).
L’Heureux, N. et al. Human tissue-engineered blood vessels for adult arterial revascularization. Nat. Med. 12, 361–365 (2006).
Dahl, S. L. M. et al. Readily available tissue-engineered vascular grafts. Sci. Transl Med. 3, 68ra9 (2011).
Quint, C. et al. Decellularized tissue-engineered blood vessel as an arterial conduit. Proc. Natl Acad. Sci. USA 108, 9214–9219 (2011).
Kucukgul, C. et al. 3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells. Biotechnol. Bioeng. 112, 811–821 (2015).
Kirkton, R. D. et al. Bioengineered human acellular vessels recellularize and evolve into living blood vessels after human implantation. Sci. Transl Med. 11, eaau6934 (2019).
Burke, J. F. et al. Successful use of a physiologically acceptable artificial skin in the treatment of extensive burn injury. Ann. Surg. 194, 413 (1981).
Langer, R. & Vacanti, J. Tissue engineering. Science 260, 920–926 (1993).
Cao, Y., Vacanti, J. P., Paige, K. T., Upton, J. & Vacanti, V. Transplantation of chondrocytes utilizing a polymer-cell construct to produce tissue-engineered cartilage in the shape of a human ear. Plast. Reconstr. Surg. 100, 297–304 (1997).
Jorgensen, A. M., Yoo, J. J. & Atala, A. Solid organ bioprinting: strategies to achieve organ function. Chem. Rev. 120, 11093–11127 (2020).
Bhatia, S. N. & Ingber, D. E. Microfluidic organs-on-chips. Nat. Biotechnol. 32, 760–772 (2014).
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M. & Ingber, D. E. Geometric control of cell life and death. Science 276, 1425–1428 (1997).
Bhatia, S. N., Yarmush, M. L. & Toner, M. Controlling cell interactions by micropatterning in co-cultures: hepatocytes and 3T3 fibroblasts. J. Biomed. Mater. Res. 34, 189–199 (1997).
Bhatia, S. N., Balis, U. J., Yarmush, M. L. & Toner, M. Microfabrication of hepatocyte/fibroblast co-cultures: role of homotypic cell interactions. Biotechnol. Prog. 14, 378–387 (1998).
Desai, T. A. et al. Microfabricated immunoisolating biocapsules. Biotechnol. Bioeng. 57, 118–120 (1998).
Tan, W. & Desai, T. A. Microfluidic patterning of cells in extracellular matrix biopolymers: effects of channel size, cell type, and matrix composition on pattern integrity. Tissue Eng. 9, 255–267 (2004).
Yue, T. et al. A modular microfluidic system based on a multilayered configuration to generate large-scale perfusable microvascular networks. Microsyst. Nanoeng. 7, 1–13 (2021).
Kim, S., Lee, H., Chung, M. & Jeon, N. L. Engineering of functional, perfusable 3D microvascular networks on a chip. Lab Chip 13, 1489–1500 (2013).
Zheng, Y. et al. In vitro microvessels for the study of angiogenesis and thrombosis. Proc. Natl Acad. Sci. USA 109, 9342–9347 (2012).
Baranski, J. D. et al. Geometric control of vascular networks to enhance engineered tissue integration and function. Proc. Natl Acad. Sci. USA 110, 7586–7591 (2013).
Redd, M. A. et al. Patterned human microvascular grafts enable rapid vascularization and increase perfusion in infarcted rat hearts. Nat. Commun. 10, 584 (2019).
Choi, N. W. et al. Microfluidic scaffolds for tissue engineering. Nat. Mater. 6, 908–915 (2007).
Golden, A. P. & Tien, J. Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element. Lab Chip 7, 720–725 (2007).
Cuchiara, M. P., Allen, A. C. B., Chen, T. M., Miller, J. S. & West, J. L. Multilayer microfluidic PEGDA hydrogels. Biomaterials 31, 5491–5497 (2010).
Ling, Y. et al. A cell-laden microfluidic hydrogel. Lab Chip 7, 756–762 (2007).
Tan, W. & Desai, T. A. Layer-by-layer microfluidics for biomimetic three-dimensional structures. Biomaterials 25, 1355–1364 (2004).
Liu, V. A. & Bhatia, S. N. Three-dimensional photopatterning of hydrogels containing living cells. Biomed. Microdevices 4, 257–266 (2002).
Zhang, B. et al. Biodegradable scaffold with built-in vasculature for organ-on-a-chip engineering and direct surgical anastomosis. Nat. Mater. 15, 669–678 (2016).
Kloxin, A. M., Kasko, A. M., Salinas, C. N. & Anseth, K. S. Photodegradable hydrogels for dynamic tuning of physical and chemical properties. Science 324, 59–63 (2009).
Arakawa, C. K., Badeau, B. A., Zheng, Y. & DeForest, C. A. Multicellular vascularized engineered tissues through user-programmable biomaterial photodegradation. Adv. Mater. 29, 1703156 (2017).
Arakawa, C. et al. Biophysical and biomolecular interactions of malaria-infected erythrocytes in engineered human capillaries. Sci. Adv. 6, eaay7243 (2020).
Heintz, K. A. et al. Fabrication of 3D biomimetic microfluidic networks in hydrogels. Adv. Healthc. Mater. 5, 2153–2160 (2016).
Corbett, D. C., Olszewski, E. & Stevens, K. A FRESH take on resolution in 3D bioprinting. Trends Biotechnol. 37, 1153–1155 (2019).
Dasgupta, Q. & Black, L. D. III A FRESH SLATE for 3D bioprinting. Science 365, 446–447 (2019).
Tomasina, C., Bodet, T., Mota, C., Moroni, L. & Camarero-Espinosa, S. Bioprinting vasculature: materials, cells and emergent techniques. Materials 12, 2701 (2019).
Mironov, V. et al. Organ printing: tissue spheroids as building blocks. Biomaterials 30, 2164–2174 (2009).
Visconti, R. P. et al. Towards organ printing: engineering an intra-organ branched vascular tree. Expert Opin. Biol. Ther. 10, 409–420 (2010).
VK, L. et al. Generation of multi-scale vascular network system within 3D hydrogel using 3D bio-printing technology. Cell. Mol. Bioeng. 7, 460–472 (2014).
Pati, F. et al. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink. Nat. Commun. 5, 3935 (2014).
Kang, H.-W. et al. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity. Nat. Biotechnol. 34, 312–319 (2016).
Pedroza-González, S. C., Rodriguez-Salvador, M., Pérez-Benítez, B. E., Alvarez, M. M. & Santiago, G. T. Bioinks for 3D bioprinting: a scientometric analysis of two decades of progress. Int. J. Bioprinting 7, 68–91 (2021).
Dubbin, K., Hori, Y., Lewis, K. K. & Heilshorn, S. C. Dual-stage crosslinking of a gel-phase bioink improves cell viability and homogeneity for 3D bioprinting. Adv. Healthc. Mater. 5, 2488–2492 (2016).
Skylar-Scott, M. A. et al. Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels. Sci. Adv. 5, eaaw2459 (2019).
Kolesky, D. B. et al. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv. Mater. 26, 3124–3130 (2014).
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A. & Lewis, J. A. Three-dimensional bioprinting of thick vascularized tissues. Proc. Natl Acad. Sci. USA 113, 3179–3184 (2016).
Miller, J. S. et al. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues. Nat. Mater. 11, 768–774 (2012).
Kinstlinger, I. S. et al. Generation of model tissues with dendritic vascular networks via sacrificial laser-sintered carbohydrate templates. Nat. Biomed. Eng. 4, 916–932 (2020).
Ouyang, L. et al. Void-free 3D bioprinting for in situ endothelialization and microfluidic perfusion. Adv. Funct. Mater. 30, 1908349 (2020).
Lee, A. et al. 3D bioprinting of collagen to rebuild components of the human heart. Science 365, 482–487 (2019).
Skylar-Scott, M. A., Mueller, J., Visser, C. W. & Lewis, J. A. Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575, 330–335 (2019).
Grigoryan, B. et al. Multivascular networks and functional intravascular topologies within biocompatible hydrogels. Science 364, 458–464 (2019).
Tsang, V. L. et al. Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels. FASEB J. 21, 790–801 (2007).
Lin, H. et al. Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture. Biomaterials 34, 331–339 (2013).
Chrobak, K. M., Potter, D. R. & Tien, J. Formation of perfused, functional microvascular tubes in vitro. Microvasc. Res. 71, 185–196 (2006).
Kim, H. et al. Light-activated decellularized extracellular matrix-based bioinks for volumetric tissue analogs at the centimeter scale. Adv. Funct. Mater. 31, 2011252 (2021).
Schwab, A. et al. Printability and shape fidelity of bioinks in 3D bioprinting. Chem. Rev. 120, 11028–11055 (2020).
Guillemot, F., Souquet, A., Catros, S. & Guillotin, B. Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. Nanomedicine 5, 507–515 (2010).
Murphy, S. V. & Atala, A. 3D bioprinting of tissues and organs. Nat. Biotechnol. 32, 773–785 (2014).
Pereira, R. F. & Bártolo, P. J. 3D bioprinting of photocrosslinkable hydrogel constructs. J. Appl. Polym. Sci. 132, 42458 (2015).
Choi, J. R., Yong, K. W., Choi, J. Y. & Cowie, A. C. Recent advances in photo-crosslinkable hydrogels for biomedical applications. Biotechniques 66, 40–53 (2019).
Hahn, M. S. et al. Photolithographic patterning of polyethylene glycol hydrogels. Biomaterials 27, 2519–2524 (2006).
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N. & Anseth, K. S. Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility. Biomaterials 30, 6702–6707 (2009).
Liu, J., Zheng, H., Poh, P. S. P., Machens, H. G. & Schilling, A. F. Hydrogels for engineering of perfusable vascular networks. Int. J. Mol. Sci. 16, 15997–16016 (2015).
Lutolf, M. P. et al. Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: engineering cell-invasion characteristics. Proc. Natl Acad. Sci. USA 100, 5413–5418 (2003).
Bellis, S. L. Advantages of RGD peptides for directing cell association with biomaterials. Biomaterials 32, 4205–4210 (2011).
Ferreira, L. S. et al. Bioactive hydrogel scaffolds for controllable vascular differentiation of human embryonic stem cells. Biomaterials 28, 2706–2717 (2007).
Hanjaya-Putra, D. & Gerecht, S. Vascular engineering using human embryonic stem cells. Biotechnol. Prog. 25, 2–9 (2009).
Benton, J. A., DeForest, C. A., Vivekanandan, V. & Anseth, K. S. Photocrosslinking of gelatin macromers to synthesize porous hydrogels that promote valvular interstitial cell function. Tissue Eng. Part A 15, 3221–3230 (2009).
Liu, Y. & Chan-Park, M. B. Hydrogel based on interpenetrating polymer networks of dextran and gelatin for vascular tissue engineering. Biomaterials 30, 196–207 (2009).
Leucht, A., Volz, A.-C., Rogal, J., Borchers, K. & Kluger, P. J. Advanced gelatin-based vascularization bioinks for extrusion-based bioprinting of vascularized bone equivalents. Sci. Rep. 10, 5330 (2020).
Bellan, L. M., Pearsall, M., Cropek, D. M. & Langer, R. A 3D interconnected microchannel network formed in gelatin by sacrificial shellac microfibers. Adv. Mater. 24, 5187–5191 (2012).
Yuan, K., Orcholski, M. E., Huang, N. F. & Perez, V. A. D. J. In vivo study of human endothelial-pericyte interaction using the matrix gel plug assay in mouse. J. Vis. Exp. 2016, e54617 (2016).
Kosyakova, N. et al. Differential functional roles of fibroblasts and pericytes in the formation of tissue-engineered microvascular networks in vitro. NPJ Regen. Med. 5, 1 (2020).
Kubota, Y., Kleinman, H. K., Martin, G. R. & Lawley, T. J. Role of laminin and basement membrane in the morphological differentiation of human endothelial cells into capillary-like structures. J. Cell Biol. 107, 1589–1598 (1988).
Chen, X. et al. Prevascularization of a fibrin-based tissue construct accelerates the formation of functional anastomosis with host vasculature. Tissue Eng. Part A 15, 1363–1371 (2008).
SL, B., CX, M., MT, D. & GE, D. Investigating human vascular tube morphogenesis and maturation using endothelial cell–pericyte co-cultures and a doxycycline-inducible genetic system in 3D extracellular matrices. Methods Mol. Biol. 1189, 171–189 (2015).
Hanjaya-Putra, D. et al. Controlled activation of morphogenesis to generate a functional human microvasculature in a synthetic matrix. Blood 118, 804–815 (2011).
Schechner, J. S. et al. In vivo formation of complex microvessels lined by human endothelial cells in an immunodeficient mouse. Proc. Natl Acad. Sci. USA 97, 9191–9196 (2000).
Levenberg, S., Golub, J. S., Amit, M., Itskovitz-Eldor, J. & Langer, R. Endothelial cells derived from human embryonic stem cells. Proc. Natl Acad. Sci. USA 99, 4391–4396 (2002).
Koike, N. et al. Creation of long-lasting blood vessels. Nature 428, 138–139 (2004).
Stratman, A. N., Malotte, K. M., Mahan, R. D., Davis, M. J. & Davis, G. E. Pericyte recruitment during vasculogenic tube assembly stimulates endothelial basement membrane matrix formation. Blood 114, 5091–5101 (2009).
Song, H.-H. G. et al. Transient support from fibroblasts is sufficient to drive functional vascularization in engineered tissues. Adv. Funct. Mater. 30, 2003777 (2020).
Levenberg, S. et al. Engineering vascularized skeletal muscle tissue. Nat. Biotechnol. 23, 879–884 (2005).
Stevens, K. R. et al. Physiological function and transplantation of scaffold-free and vascularized human cardiac muscle tissue. Proc. Natl Acad. Sci. USA 106, 16568–16573 (2009).
Valarmathi, M. T., Fuseler, J. W., Potts, J. D., Davis, J. M. & Price, R. L. Functional tissue engineering: a prevascularized cardiac muscle construct for validating human mesenchymal stem cells engraftment potential in vitro. Tissue Eng. Part A 24, 157–185 (2018).
Sobrino, A. et al. 3D microtumors in vitro supported by perfused vascular networks. Sci. Rep. 6, 31589 (2016).
Abdul Sisak, M. A., Louis, F. & Matsusaki, M. In vitro fabrication and application of engineered vascular hydrogels. Polym. J. 52, 871–881 (2020).
Berthod, F., Symes, J., Tremblay, N., Medin, J. A. & Auger, F. A. Spontaneous fibroblast-derived pericyte recruitment in a human tissue-engineered angiogenesis model in vitro. J. Cell. Physiol. 227, 2130–2137 (2012).
Newman, A. C., Nakatsu, M. N., Chou, W., Gershon, P. D. & Hughes, C. C. W. The requirement for fibroblasts in angiogenesis: fibroblast-derived matrix proteins are essential for endothelial cell lumen formation. Mol. Biol. Cell 22, 3791–3800 (2011).
Palikuqi, B. et al. Adaptable haemodynamic endothelial cells for organogenesis and tumorigenesis. Nature 585, 426–432 (2020).
Bersini, S. et al. A microfluidic 3D in vitro model for specificity of breast cancer metastasis to bone. Biomaterials 35, 2454 (2014).
Lee, C. S. & Leong, K. W. Advances in microphysiological blood-brain barrier (BBB) models towards drug delivery. Curr. Opin. Biotechnol. 2020, 78–87 (2020).
Clevers, H. Modeling development and disease with organoids. Cell 165, 1586–1597 (2016).
Shun, Z., Zhengpeng, W. & D. Kamm, R. Vascularized organoids on a chip: strategies for engineering organoids with functional vasculature. Lab Chip 21, 473–488 (2021).
Matsumoto, K., Yoshitomi, H., Rossant, J. & Zaret, K. S. Liver organogenesis promoted by endothelial cells prior to vascular function. Science 294, 559–563 (2001).
Azizoglu, D. B. & Cleaver, O. Blood vessel crosstalk during organogenesis — focus on pancreas and endothelial cells. Wiley Interdiscip. Rev. Dev. Biol. 5, 598–617 (2016).
Crivellato, E., Nico, B. & Ribatti, D. Contribution of endothelial cells to organogenesis: a modern reappraisal of an old Aristotelian concept. J. Anat. 211, 415 (2007).
Del Moral, P. M. et al. VEGF-A signaling through Flk-1 is a critical facilitator of early embryonic lung epithelial to endothelial crosstalk and branching morphogenesis. Dev. Biol. 290, 177–188 (2006).
Homan, K. A. et al. Flow-enhanced vascularization and maturation of kidney organoids in vitro. Nat. Methods 16, 255–262 (2019).
Takebe, T. et al. Vascularized and functional human liver from an iPSC-derived organ bud transplant. Nature 499, 481–484 (2013).
Wimmer, R. A. et al. Human blood vessel organoids as a model of diabetic vasculopathy. Nature 565, 505–510 (2019).
Takasato, M. et al. Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis. Nature 526, 564–568 (2015).
Mansour, A. A. et al. An in vivo model of functional and vascularized human brain organoids. Nat. Biotechnol. 36, 432–441 (2018).
Kreutziger, K. L. et al. Developing vasculature and stroma in engineered human myocardium. Tissue Eng. Part A 17, 1219–1229 (2011).
Monteil, V. et al. Inhibition of SARS-CoV-2 infections in engineered human tissues using clinical-grade soluble human ACE2. Cell 181, 905–913.e7 (2020).
Bezenah, J. R., Kong, Y. P. & Putnam, A. J. Evaluating the potential of endothelial cells derived from human induced pluripotent stem cells to form microvascular networks in 3D cultures. Sci. Rep. 8, 2671 (2018).
Andrée, B. et al. Formation of three-dimensional tubular endothelial cell networks under defined serum-free cell culture conditions in human collagen hydrogels. Sci. Rep. 9, 5437 (2019).
Rosso, F., Giordano, A., Barbarisi, M. & Barbarisi, A. From cell–ECM interactions to tissue engineering. J. Cell. Physiol. 199, 174–180 (2004).
Kaur, S., Kaur, I., Rawal, P., Tripathi, D. M. & Vasudevan, A. Non-matrigel scaffolds for organoid cultures. Cancer Lett. 504, 58–66 (2021).
Gerecht, S. et al. Hyaluronic acid hydrogel for controlled self-renewal and differentiation of human embryonic stem cells. Proc. Natl Acad. Sci. USA 104, 11298–11303 (2007).
Kusuma, S. et al. Self-organized vascular networks from human pluripotent stem cells in a synthetic matrix. Proc. Natl Acad. Sci. USA 110, 12601–12606 (2013).
Ghajar, C. M. et al. The effect of matrix density on the regulation of 3-D capillary morphogenesis. Biophys. J. 94, 1930–1941 (2008).
Mason, B. N., Starchenko, A., Williams, R. M., Bonassar, L. J. & Reinhart-King, C. A. Tuning three-dimensional collagen matrix stiffness independently of collagen concentration modulates endothelial cell behavior. Acta Biomater. 9, 4635–4644 (2013).
Yamamura, N., Sudo, R., Ikeda, M. & Tanishita, K. Effects of the mechanical properties of collagen gel on the in vitro formation of microvessel networks by endothelial cells. Tissue Eng. 13, 1443–1453 (2007).
Wei, Z., Schnellmann, R., Pruitt, H. C. & Gerecht, S. Hydrogel network dynamics regulate vascular morphogenesis. Cell Stem Cell 27, 798–812.e6 (2020).
Udan, R. S., Culver, J. C. & Dickinson, M. E. Understanding vascular development. Wiley Interdiscip. Rev. Dev. Biol. 2, 327–346 (2013).
Schöneberg, J. et al. Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique. Sci. Rep. 8, 10430 (2018).
White, S. M. et al. Implanted cell-dense prevascularized tissues develop functional vasculature that supports reoxygenation after thrombosis. Tissue Eng. Part A 20, 2316 (2014).
White, S. M. et al. Longitudinal in vivo imaging to assess blood flow and oxygenation in implantable engineered tissues. Tissue Eng. Part C 18, 697 (2012).
Badeau, B. A. & DeForest, C. A. Programming stimuli-responsive behavior into biomaterials. Annu. Rev. Biomed. Eng. 21, 241–265 (2019).
Richardson, T. P., Peters, M. C., Ennett, A. B. & Mooney, D. J. Polymeric system for dual growth factor delivery. Nat. Biotechnol. 19, 1029–1034 (2001).
Patel, Z. S. et al. Dual delivery of an angiogenic and an osteogenic growth factor for bone regeneration in a critical size defect model. Bone 43, 931–940 (2008).
Freeman, I. & Cohen, S. The influence of the sequential delivery of angiogenic factors from affinity-binding alginate scaffolds on vascularization. Biomaterials 30, 2122–2131 (2009).
Chen, R. R., Silva, E. A., Yuen, W. W. & Mooney, D. J. Spatio–temporal VEGF and PDGF delivery patterns blood vessel formation and maturation. Pharm. Res. 24, 258–264 (2006).
Murphy, W. L., Peters, M. C., Kohn, D. H. & Mooney, D. J. Sustained release of vascular endothelial growth factor from mineralized poly(lactide-co-glycolide) scaffolds for tissue engineering. Biomaterials 21, 2521–2527 (2000).
Raghavan, S., Nelson, C. M., Baranski, J. D., Lim, E. & Chen, C. S. Geometrically controlled endothelial tubulogenesis in micropatterned gels. Tissue Eng. Part A 16, 2255–2263 (2010).
Weijts, B. et al. Endothelial struts enable the generation of large lumenized blood vessels de novo. Nat. Cell Biol. 23, 322–329 (2021).
Dreier, B. et al. Early responses of vascular endothelial cells to topographic cues. Am. J. Physiol. Cell Physiol. 305, 290–298 (2013).
Hatano, R. et al. Endothelial cells derived from embryonic stem cells respond to cues from topographical surface patterns. J. Biol. Eng. 7, 18 (2013).
Morgan, J. T. et al. Integration of basal topographic cues and apical shear stress in vascular endothelial cells. Biomaterials 33, 4126–4135 (2012).
Dejana, E., Hirschi, K. K. & Simons, M. The molecular basis of endothelial cell plasticity. Nat. Commun. 8, 14361 (2017).
Lian, X. et al. Efficient differentiation of human pluripotent stem cells to endothelial progenitors via small-molecule activation of WNT signaling. Stem Cell Rep. 3, 804–816 (2014).
Prasain, N. et al. Differentiation of human pluripotent stem cells to cells similar to cord-blood endothelial colony–forming cells. Nat. Biotechnol. 32, 1151–1157 (2014).
Palpant, N. J. et al. Generating high-purity cardiac and endothelial derivatives from patterned mesoderm using human pluripotent stem cells. Nat. Protoc. 12, 15–31 (2016).
Williams, I. M. & Wu, J. C. Generation of endothelial cells from human pluripotent stem cells. Arterioscler. Thromb. Vasc. Biol. 39, 1317–1329 (2019).
Destefano, J. G., Jamieson, J. J., Linville, R. M. & Searson, P. C. Benchmarking in vitro tissue-engineered blood–brain barrier models. Fluids Barriers CNS 15, 32 (2018).
Phan, D. T. T. et al. Blood–brain barrier-on-a-chip: microphysiological systems that capture the complexity of the blood–central nervous system interface. Exp. Biol. Med. 242, 1669–1678 (2017).
Lee, S., Chung, M., Lee, S. R. & Jeon, N. L. 3D brain angiogenesis model to reconstitute functional human blood–brain barrier in vitro. Biotechnol. Bioeng. 117, 748–762 (2020).
Campisi, M. et al. 3D self-organized microvascular model of the human blood-brain barrier with endothelial cells, pericytes and astrocytes. Biomaterials 180, 117–129 (2018).
Ferland-McCollough, D., Slater, S., Richard, J., Reni, C. & Mangialardi, G. Pericytes, an overlooked player in vascular pathobiology. Pharmacol. Ther. 171, 30–42 (2017).
Banai, S. et al. Upregulation of vascular endothelial growth factor expression induced by myocardial ischaemia: implications for coronary angiogenesis. Cardiovasc. Res. 28, 1176–1179 (1994).
Conway, E. M., Collen, D. & Carmeliet, P. Molecular mechanisms of blood vessel growth. Cardiovasc. Res. 49, 507–521 (2001).
Pober, J. S. & Sessa, W. C. Evolving functions of endothelial cells in inflammation. Nat. Rev. Immunol. 7, 803–815 (2007).
Nagao, R. J. et al. Transforming endothelium with platelet-rich plasma in engineered microvessels. Adv. Sci. 6, 1901725 (2019).
DeFalco, T., Bhattacharya, I., Williams, A. V., Sams, D. M. & Capel, B. Yolk-sac-derived macrophages regulate fetal testis vascularization and morphogenesis. Proc. Natl Acad. Sci. USA 111, E2384–E2393 (2014).
Fantin, A. et al. Tissue macrophages act as cellular chaperones for vascular anastomosis downstream of VEGF-mediated endothelial tip cell induction. Blood 116, 829–840 (2010).
King, W., Toler, K. & Woodell-May, J. Role of white blood cells in blood- and bone marrow-based autologous therapies. Biomed Res. Int. 2018, 6510842 (2018).
Hsu, C.-W. et al. Improved angiogenesis in response to localized delivery of macrophage-recruiting molecules. PLoS ONE 10, e0131643 (2015).
Krieger, J. R. et al. Spatially localized recruitment of anti-inflammatory monocytes by SDF-1α-releasing hydrogels enhances microvascular network remodeling. Biomaterials 77, 280–290 (2016).
Liu, X. et al. Lymphoangiocrine signals promote cardiac growth and repair. Nature 588, 705–711 (2020).
Landau, S. et al. Investigating lymphangiogenesis in vitro and in vivo using engineered human lymphatic vessel networks. Proc. Natl Acad. Sci. USA 6, 764 (2021).
Lee, S. et al. Modeling 3D human tumor lymphatic vessel network using high-throughput platform. Adv. Biol. 5, 2000195 (2021).
Polacheck, W. J. et al. A non-canonical Notch complex regulates adherens junctions and vascular barrier function. Nature 552, 258–262 (2017).
Hahn, C. & Schwartz, M. A. Mechanotransduction in vascular physiology and atherogenesis. Nat. Rev. Mol. Cell Biol. 10, 53 (2009).
MA, S. & ME, F. Interstitial flow and its effects in soft tissues. Annu. Rev. Biomed. Eng. 9, 229–256 (2007).
Rutkowski, J. M. & Swartz, M. A. A driving force for change: interstitial flow as a morphoregulator. Trends Cell Biol. 17, 44–50 (2007).
Mirabella, T. et al. 3D-printed vascular networks direct therapeutic angiogenesis in ischaemia. Nat. Biomed. Eng. 1, 0083 (2017).
Kinstlinger, I. S. et al. Perfusion and endothelialization of engineered tissues with patterned vascular networks. Nat. Protoc. 16, 3089–3113 (2021).
Mack, J. J. et al. NOTCH1 is a mechanosensor in adult arteries. Nat. Commun. 8, 1620 (2017).
MacK, J. J. & Luisa Iruela-Arispe, M. NOTCH regulation of the endothelial cell phenotype. Curr. Opin. Hematol. 25, 212–218 (2018).
Galie, P. A. et al. Fluid shear stress threshold regulates angiogenic sprouting. Proc. Natl Acad. Sci. USA 111, 7968–7973 (2014).
Song, J. W. & Munn, L. L. Fluid forces control endothelial sprouting. Proc. Natl Acad. Sci. USA 108, 15342–15347 (2011).
Mandrycky, C., Hadland, B. & Zheng, Y. 3D curvature-instructed endothelial flow response and tissue vascularization. Sci. Adv. 6, eabb3629 (2020).
Buck, R. C. Reorientation response of cells to repeated stretch and recoil of the substratum. Exp. Cell Res. 127, 470–474 (1980).
Nagayama, K., Kimura, Y., Makino, N. & Matsumoto, T. Strain waveform dependence of stress fiber reorientation in cyclically stretched osteoblastic cells: effects of viscoelastic compression of stress fibers. Am. J. Physiol. Cell Physiol. 302, 1469–1478 (2012).
Landau, S. et al. Tissue-level mechanosensitivity: predicting and controlling the orientation of 3D vascular networks. Nano Lett. 18, 7698–7708 (2018).
Dong, X. et al. Controlled delivery of basic fibroblast growth factor (bFGF) using acoustic droplet vaporization stimulates endothelial network formation. Acta Biomater. 97, 409–419 (2019).
Moncion, A. et al. Controlled release of basic fibroblast growth factor for angiogenesis using acoustically-responsive scaffolds. Biomaterials 140, 26–36 (2017).
O’Neill, H. S. et al. A stimuli responsive liposome loaded hydrogel provides flexible on-demand release of therapeutic agents. Acta Biomater. 48, 110–119 (2017).
Kim, H., Park, H., Lee, J. W. & Lee, K. Y. Magnetic field-responsive release of transforming growth factor beta 1 from heparin-modified alginate ferrogels. Carbohydr. Polym. 151, 467–473 (2016).
Cheng, G. et al. Engineered blood vessel networks connect to host vasculature via wrapping-and-tapping anastomosis. Blood 118, 4740 (2011).
Brady, E. L. et al. Guided vascularization in the rat heart leads to transient vessel patterning. APL Bioeng. 4, 016105 (2020).
Pool, L. R., Ning, H., Lloyd-Jones, D. M. & Allen, N. B. Trends in racial/ethnic disparities in cardiovascular health among US adults from 1999–2012. J. Am. Heart Assoc. 6, e006027 (2017).
Lakatta, E. G. So! What’s aging? Is cardiovascular aging a disease? J. Mol. Cell. Cardiol. 83, 1–13 (2015).
Paneni, F., Diaz Cañestro, C., Libby, P., Lüscher, T. F. & Camici, G. G. The aging cardiovascular system: understanding it at the cellular and clinical levels. J. Am. Coll. Cardiol. 69, 1952–1967 (2017).
Nofi, C., Bogatyryov, Y. & Dedkov, E. I. Preservation of functional microvascular bed is vital for long-term survival of cardiac myocytes within large transmural post-myocardial infarction scar. J. Histochem. Cytochem. 66, 99–120 (2017).
Le, L. V. et al. Injectable hyaluronic acid based microrods provide local micromechanical and biochemical cues to attenuate cardiac fibrosis after myocardial infarction. Biomaterials 169, 11–21 (2018).
Szklanny, A. A. et al. 3D bioprinting of engineered tissue flaps with hierarchical vessel networks (VesselNet) for direct host-to-implant perfusion. Adv. Mater. 33, 2102661 (2021).
Chiu, L. L. Y., Montgomery, M., Liang, Y., Liu, H. & Radisic, M. Perfusable branching microvessel bed for vascularization of engineered tissues. Proc. Natl Acad. Sci. USA 109, E3414–E3423 (2012).
Hu, W. et al. Optogenetics sheds new light on tissue engineering and regenerative medicine. Biomaterials 227, 119546 (2020).
Corbett, D. C. et al. Thermofluidic heat exchangers for actuation of transcription in artificial tissues. Sci. Adv. 6, eabb9062 (2020).
Kang, M., Jin, S., Lee, D. & Cho, H. MRI visualization of whole brain macro- and microvascular remodeling in a rat model of ischemic stroke: a pilot study. Sci. Rep. 10, 4989 (2020).
Zagorchev, L. et al. Micro computed tomography for vascular exploration. Vasc. Cell 2, 7 (2010).
Ertürk, A. et al. Three-dimensional imaging of solvent-cleared organs using 3DISCO. Nat. Protoc. 7, 1983–1995 (2012).
Yang, B. et al. Single-cell phenotyping within transparent intact tissue through whole-body clearing. Cell 158, 945–958 (2014).
Chung, K. et al. Structural and molecular interrogation of intact biological systems. Nature 497, 332–337 (2013).
Ueda, H. R. et al. Tissue clearing and its applications in neuroscience. Nat. Rev. Neurosci. 21, 61–79 (2020).
Kirst, C. et al. Mapping the fine-scale organization and plasticity of the brain vasculature. Cell 180, 780–795.e25 (2020).
Chen, F., Tillberg, P. W. & Boyden, E. S. Expansion microscopy. Science 347, 543–548 (2015).
Tombor, L. S. et al. Single cell sequencing reveals endothelial plasticity with transient mesenchymal activation after myocardial infarction. Nat. Commun. 12, 681 (2021).
Schupp, J. C. et al. Integrated single-cell atlas of endothelial cells of the human lung. Circulation 144, 286–302 (2021).
Paik, D. T. et al. Single-cell RNA sequencing unveils unique transcriptomic signatures of organ-specific endothelial cells. Circulation 142, 1848–1862 (2020).
Ma, F., Hernandez, G. E., Romay, M. & Iruela-Arispe, M. L. Single-cell RNA sequencing to study vascular diversity and function. Curr. Opin. Hematol. 28, 221–229 (2021).
Rendeiro, A. F. et al. The spatial landscape of lung pathology during COVID-19 progression. Nature 593, 564–569 (2021).
Wang, X. et al. Three-dimensional intact-tissue sequencing of single-cell transcriptional states. Science 361, eaat5691 (2018).
Moffitt, J. R. & Zhuang, X. RNA imaging with multiplexed error-robust fluorescence in situ hybridization (MERFISH). Methods Enzymol. 572, 1–49 (2016).
Junker, J. P. et al. Genome-wide RNA tomography in the zebrafish embryo. Cell 159, 662–675 (2014).
Eng, C.-H. L. et al. Transcriptome-scale super-resolved imaging in tissues by RNA seqFISH+. Nature 568, 235–239 (2019).
Asp, M. et al. A spatiotemporal organ-wide gene expression and cell atlas of the developing human heart. Cell 179, 1647–1660.e19 (2019).
Burton, A. C. Relation of structure to function of the tissues of the wall of blood vessels. Physiol. Rev. 34, 619–642 (1954).
Potente, M. & Mäkinen, T. Vascular heterogeneity and specialization in development and disease. Nat. Rev. Mol. Cell Biol. 18, 477–494 (2017).
Jain, R. K. Molecular regulation of vessel maturation. Nat. Med. 9, 685–693 (2003).
Drake, C. J. Embryonic and adult vasculogenesis. Birth Defects Res. C 69, 73–82 (2003).
Jones, E. A. V., Noble, F. le & Eichmann, A. What determines blood vessel structure? Genetic prespecification vs. hemodynamics. Physiology 21, 388–395 (2006).
Tucker, W. D., Arora, Y. & Mahajan, K. Anatomy, Blood Vessels (StatPearls, 2021).
Moini, J. in Anatomy and Physiology for Health Professionals, 36–48 (Jones & Bartlett, 2020).
Marcu, R. et al. Human organ-specific endothelial cell heterogeneity. iScience 4, 20–35 (2018).
Aird, W. C. Phenotypic heterogeneity of the endothelium. Circ. Res. 100, 158–173 (2007).
Gunawardana, H. et al. Tissue-specific endothelial cell heterogeneity contributes to unequal inflammatory responses. Sci. Rep. 11, 1949 (2021).
Acknowledgements
The authors acknowledge support from the National Institutes of Health (NIH) R01DK128551 (to K.R.S.), Welcome Leap Fund (to K.R.S.) W.M. Keck Foundation (to K.R.S.), National Science Foundation (NSF) Graduate Research Fellowship (to C.O’C.), American Heart Association Fellowship (to E.B.), Rhines Rising Star Larry Hench Professorship (to E.M.), NIH KL2TROO1429 (to E.M.), NIH R01HL141570 (to Y.Z.) and NIH/NCATS UG3TR002158 (to Y.Z.). The authors further acknowledge that papers authored by women and scholars from underrepresented racial and ethnic groups are systematically undercited and have made every attempt to reference relevant papers in a manner that is equitable in terms of gender and racial representation.
Author information
Authors and Affiliations
Contributions
C.O’C., E.B. and E.M. researched data for the article. All authors contributed substantially to discussion of the content, wrote the article, and reviewed and/or edited the manuscript before submission.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Reviews Materials thanks Roger Kamm, Jinah Jang and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
O’Connor, C., Brady, E., Zheng, Y. et al. Engineering the multiscale complexity of vascular networks. Nat Rev Mater 7, 702–716 (2022). https://doi.org/10.1038/s41578-022-00447-8
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41578-022-00447-8