As reported in 1756 by Johann Gottlob Leidenfrost, volatile liquids on hot solids form “gleaming drops resembling quicksilver”, a consequence of their levitation on a vapour cushion1,2. This makes the drops spectacularly mobile, moving away as soon as they are deposited—an observation commonly attributed to gravity or surrounding airflows. This mobility has been exploited to manipulate drops, because tiny forces such as those generated on asymmetric substrates can move them in well-defined directions3,4,5, a situation that also provides heat evacuation6. Here we report that Leidenfrost droplets initially at rest on horizontal substrates self-rotate and self-propel in the direction they are rolling, in the absence of any source of asymmetry or external force. Their rapid internal flow is found to be accompanied by a tilting of their base, which creates a permanent ratchet-like mechanism, entraining the rolling liquid despite the fact that it is not in contact with its substrate.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Data availability

The data that support the plots within this paper and other findings of this study are available from the corresponding author upon request.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Change history

  • 01 October 2018

    In the version of this Letter originally published, the Supplementary Videos were incorrectly labelled; the descriptions of 1–4 should have gone with the videos of 6–9, and the descriptions of 5–9 should have gone with the videos of 1–5. This has now been corrected.


  1. 1.

    Boerhaave, H. Elementae Chemiae Vol. 1 (Lugduni Batavorum, Leiden, 1732).

  2. 2.

    Leidenfrost, J. G. De Aquae Communis Nonnullis Qualitatibus Tractatus (Ovenius, Duisburg, 1756); transl. Wares, C. On the fixation of water in diverse fire. Int. J. Heat Mass Trans. 9, 1153–1166 (1966).

  3. 3.

    Linke, H. et al. Self-propelled Leidenfrost droplets. Phys. Rev. Lett. 96, 154502 (2006).

  4. 4.

    Marín, A. G. et al. Capillary droplets on Leidenfrost micro-ratchets. Phys. Fluids 24, 1–9 (2012).

  5. 5.

    Dupeux, G. et al. Self-propelling uneven Leidenfrost solids. Phys. Fluids 25, 051704 (2013).

  6. 6.

    Singh Dhillon, N., Buongiorno, J. & Varanasi, K. K. Critical heat flux maxima during boiling crisis on textured surfaces. Nat. Commun. 6, 8247 (2015).

  7. 7.

    Bernardin, J. D. & Mudawar, I. The Leidenfrost point: experimental study and assessment of existing models. J. Heat Transf. 121, 894–903 (1999).

  8. 8.

    Bernardin, J. D. & Mudawar, I. Film boiling heat transfer of droplet streams and sprays. Int. J. Heat Mass Transf. 40, 2579–2593 (1997).

  9. 9.

    Weickgenannt, C. M. et al. Inverse-Leidenfrost phenomenon on nanofiber mats on hot surfaces. Phys. Rev. E 84, 036310 (2011).

  10. 10.

    Arnaldo del Cerro, D. et al. Leidenfrost point reduction on micropatterned metallic surfaces. Langmuir 28, 15106–15110 (2012).

  11. 11.

    Vakarelski, I. U., Patankar, N. A., Marston, J. O., Chan, D. Y. C. & Thoroddsen, S. T. Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces. Nature 489, 274–277 (2012).

  12. 12.

    Biance, A. L., Clanet, C. & Quéré, D. Leidenfrost drops. Phys. Fluids 15, 1632–1637 (2003).

  13. 13.

    Gottfried, B. S., Lee, C. J. & Bell, K. J. The Leidenfrost phenomenon: film boiling of liquid droplets on a flat plate. Int. J. Heat Mass Trans. 9, 1167–1188 (1966).

  14. 14.

    Myers, T. G. & Charpin, J. P. F. A mathematical model of the Leidenfrost effect on an axisymmetric droplet. Phys. Fluids 21, 63101–1632 (2009).

  15. 15.

    Cousins, T. R., Goldstein, R. E., Jaworski, J. W. & Pesci, A. I. A ratchet trap for Leidenfrost drops. J. Fluid Mech. 696, 215–227 (2012).

  16. 16.

    Burton, J. C., Sharpe, A. L., Van der Veen, R. C. A., Franco, A. & Nagel, S. R. Geometry of the vapor layer under a Leidenfrost drop. Phys. Rev. Lett. 109, 074301 (2012).

  17. 17.

    Pomeau, Y., Le Berre, M., Celestini, F. & Frisch, T. The Leidenfrost effect: from quasi-spherical droplets to puddles. C. R. Mec. 340, 867–881 (2012).

  18. 18.

    Duchemin, L., Lister, J. R. & Lange, U. Static shapes of levitated viscous drops. J. Fluid Mech. 533, 161–170 (2005).

  19. 19.

    Snoeijer, J. H., Brunet, P. & Eggers, J. Maximum size of drops levitated by an air cushion. Phys. Rev. E 79, 036307 (2009).

  20. 20.

    Quéré, D. Leidenfrost dynamics. Annu. Rev. Fluid Mech. 45, 197–215 (2013).

  21. 21.

    Mahadevan, L. & Pomeau, Y. Rolling droplets. Phys. Fluids 11, 2449–2453 (1999).

  22. 22.

    Wciślik, S. Thermal infrared mapping of the Leidenfrost drop evaporation. J. Phys. Conf. Ser. 745, 32064 (2016).

  23. 23.

    Mrinal, M., Wang, X. & Luo, C. Self-rotation induced propulsion of a Leidenfrost drop on a ratchet. Langmuir 33, 6307–6313 (2017).

  24. 24.

    Touihri, R., Ben Hadid, H. & Henry, D. On the onset of convective instabilities in cylindrical cavities heated from below. I. Pure thermal case. Phys. Fluids 11, 2078–2088 (1999).

  25. 25.

    Tam, D., von Arnim, V., McKinley, G. H. & Hosoi, A. E. Marangoni convection in droplets on superhydrophobic surfaces. J. Fluid Mech. 624, 101–123 (2009).

  26. 26.

    Dash, S., Chandramohan, A., Weibel, J. A. & Garimella, S. V. Buoyancy-induced on-the-spot mixing in droplets evaporating on nonwetting surfaces. Phys. Rev. E 90, 062407 (2014).

  27. 27.

    Duchesne, A., Savaro, C., Lebon, L., Pirat, C. & Limat, L. Multiple rotations of a drop rolling inside a horizontal circular hydraulic jump. Eur. Phys. Lett. 102, 64001 (2013).

  28. 28.

    Sobac, B., Rednikov, A., Dorbolo, S. & Colinet, P. Self-propelled Leidenfrost drops on a thermal gradient: a theoretical study. Phys. Fluids 29, 082101 (2017).

  29. 29.

    Couder, Y., Fort, E., Gautier, C. H. & Boudaoud, A. From bouncing to floating: noncoalescence of drops on a fluid bath. Phys. Rev. Lett. 94, 177801 (2005).

  30. 30.

    Dorbolo, S., Terwagne, D., Vandewalle, N. & Gilet, T. Resonant and rolling droplet. New J. Phys. 10, 113021 (2008).

  31. 31.

    Kang, K. H., Lee, S. J., Lee, C. M. & Kang, I. S. Quantitative visualization of flow inside an evaporating droplet using the ray tracing method. Meas. Sci. Technol. 15, 1104–1112 (2004).

Download references


We thank C. Frot for her help in designing the set-up, J. Quintela Casal for preliminary experiments and C. Josserand and É. Pirot for fruitful discussions.

Author information


  1. Physique et Mécanique des Milieux Hétérogènes, UMR 7636 du CNRS ESPCI, PSL Research University, Paris, France

    • Ambre Bouillant
    • , Timothée Mouterde
    • , Philippe Bourrianne
    • , Antoine Lagarde
    • , Christophe Clanet
    •  & David Quéré
  2. LadHyX, UMR 7646 du CNRS, École Polytechnique, Palaiseau, France

    • Ambre Bouillant
    • , Timothée Mouterde
    • , Philippe Bourrianne
    • , Antoine Lagarde
    • , Christophe Clanet
    •  & David Quéré


  1. Search for Ambre Bouillant in:

  2. Search for Timothée Mouterde in:

  3. Search for Philippe Bourrianne in:

  4. Search for Antoine Lagarde in:

  5. Search for Christophe Clanet in:

  6. Search for David Quéré in:


T.M., P.B., C.C. and D.Q. conceived the project. A.B., T.M., P.B. and D.Q. designed the project. A.B. performed most experiments and analyses to which A.L. also contributed. A.B., T.M., C.C. and D.Q. discussed the models. A.B. and D.Q. wrote the manuscript with inputs from all other authors.

Competing interests

The authors declare no competing interests.

Corresponding author

Correspondence to David Quéré.

Supplementary information

  1. Supplementary Information

    Supplementary Information, Supplementary Figures 1–10

  2. Supplementary Video 1

    Side view of the experiment shown in Fig. 1 slowed down by a factor of 40. A water drop with radius R = 1.10 mm is dispensed from a needle at the centre of a hot wafer (T = 350 °C). Tracers (predispersed in the liquid) reveal an internal rolling motion before and after the drop detaches from the needle and self-propels in the rolling direction, like a liquid wheel

  3. Supplementary Video 2

    Animation associated with Fig. 1c,d showing top-view trajectories of drops with radii R = 1.0 mm (left), R = 1.5 mm (centre) and R = 2.0 mm (right) sped up by a factor 20. The surface is a 10-cm-diameter reflective wafer heated at T = 300 °C. The grey zone on the bottom right is hidden by the needle and experimentally inaccessible. Drops with radius R = 1 mm all self-propel after detachment with straight, isotropic trajectories. In stark contrast, drops with R = 2 mm follow roughly straight trajectories in a biased direction. In between (R = 1.5 mm)—that is, on the brink of the onset of self-propulsion—drops move away along the biased direction but can turnaround and adopt a random propelling direction.

  4. Supplementary Video 3

    Internal motion in a Leidenfrost drop (R = 2.5 mm) slowed down by a factor of 10 (corresponding to Fig. 3a). The drop is immobilized in a groove heated at T = 350 °C and illuminated with a 400-µm-thick laser sheet. Tracers rise up along the interface and pursue by a downward motion along the drop centre.

  5. Supplementary Video 4

    Internal motion in a Leidenfrost droplet (R = 1.1 mm) slowed down by a factor of 25 (corresponding to Fig. 3b). The drop is immobilized by a needle on a flat wafer heated at T = 360 °C and illuminated with a laser sheet. The droplet rolls with an angular velocity of 85 rad s–1 and the flow is found to be stable in time.

  6. Supplementary Video 5

    Surface flows of a Leidenfrost drop viewed from the top throughout its life played in real time. A puddle (R ≈ 3.5 mm) is initially deposited in a groove heated at T = 350 °C. Hydrophobic tracers standing at the interface draw convective chaotic patterns that tend to organize into a four-cell symmetric structure. For R ≈ 1.8 mm, drop vibrations intensify and the symmetry breaks. Then, the drop starts to roll. Rolling persists until tracers saturate and form a static solid shell at the surface. The white bar indicates 2 mm.

  7. Supplementary Video 6

    Simultaneous PIV and interferometric visualization of the bottom interface of a Leidenfrost droplet (R = 0.73 mm) slowed down by a factor of ten (corresponding to Fig. 4a). The drop is immobilized by a needle on a transparent sapphire heated at T = 300 °C. Tracers near the surface move along the symmetry axis Ox of the interference pattern, showing a correlation between the inner flow in the drop and the deformation of the vapour cushion. The drop detaches at the end of the video, and the contact zone (that is, the drop) is found to accelerate along the Ox-direction—that is, in the direction of the tilt of the bottom interface. We also observe a few oscillations caused by the detachment. The white bar indicates 200 µm.

  8. Supplementary Video 7

    Side view of a submillimetric droplet levitating on a plate heated at 340 °C and disturbed by vertical oscillations. The black bar indicates 1 mm, and the video is slowed down by a factor of 100. A perturbation of the drop’s vertical position changes heat exchange and generates surface waves propagating from the bottom of the drop, likely to disturb the drop dynamics after detachment.

  9. Supplementary Video 8

    Side view of a water drop levitating on a plate heated at 350 °C observed with an infrared camera using a calibration range from −40 °C to 150 °C, only suitable for water, and not brass. The bar indicates 5 mm, and the video is sped up by a factor of 3.2, while the right-handed lateral colour bar gives access to the surface temperature of the drop.

  10. Supplementary Video 9

    Top view of a large puddle (R ≈ 4 mm) levitating on a Glaco-coated unpolished silicon wafer heated at 200 °C. The video is sped up by a factor of 20. The restricted mobility at the beginning can be accounted for adhesion of water on such surfaces, resulting from intermittent contact with roughness. Once the drop radius becomes millimetric, water suddenly chooses one direction and promptly leaves the substrate.

About this article

Publication history




Issue Date