Article | Published:

Anion-exchange red perovskite quantum dots with ammonium iodine salts for highly efficient light-emitting devices

Nature Photonicsvolume 12pages681687 (2018) | Download Citation


Perovskite quantum dots have significant potential for light-emitting devices because of their high colour purity and colour tunability in the visible spectrum. Here, we report highly efficient red perovskite quantum dot-based light-emitting devices. The quantum dots were fabricated by anion exchange from pristine CsPbBr3 using halide-anion-containing alkyl ammonium and aryl ammonium salts. Anion-exchange quantum dots based on ammonium iodine salts exhibited a strong redshift from green emission to a deep-red emission at 649 nm as well as higher photoluminescence quantum yields. Furthermore, the quantum dot-based light-emitting device with the alkyl ammonium iodine salt exhibited an external quantum efficiency of 21.3% and high colour purity, with Commission Internationale de l’Eclairage coordinates of (0.72, 0.28), while the light-emitting device with the aryl ammonium iodine salt showed an external quantum efficiency of 14.1%. Finally, the operational stability of the latter was 36 times higher because the surface ligand density of the corresponding quantum dots was lower.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Data availability

The data that support the plots within this paper and other findings of this study are available from the corresponding authors upon reasonable request.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. 1.

    Tan, Z. K. et al. Bright light-emitting diodes based on organometal halide perovskite. Nat. Nanotech. 9, 687–692 (2014).

  2. 2.

    Kim, Y. H. et al. Multicolored organic/inorganic hybrid perovskite light-emitting diodes. Adv. Mater. 27, 1248–1254 (2015).

  3. 3.

    Sadhanala, A. et al. Blue-green color tunable solution processable organolead chloride-bromide mixed halide perovskites for optoelectronic applications. Nano Lett. 15, 6095–6101 (2015).

  4. 4.

    Veldhuis, S. A. et al. Perovskite materials for light-emitting diodes and lasers. Adv. Mater. 28, 6804–6834 (2016).

  5. 5.

    Shan, Q. et al. High performance metal halide perovskite light-emitting diode: from material design to device optimization. Small 13, 1701770 (2017).

  6. 6.

    Kumar, S. et al. Efficient blue electroluminescence using quantum-confined two-dimensional perovskites. ACS Nano 10, 9720–9729 (2016).

  7. 7.

    Zhang, L. Q. et al. Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes. Nat. Commun. 8, 15640 (2017).

  8. 8.

    Li, G. et al. Efficient light-emitting diodes based on nanocrystalline perovskite in a dielectric polymer matrix. Nano Lett. 15, 2640–2644 (2015).

  9. 9.

    Wang, J. et al. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes. Adv. Mater. 27, 2311–2316 (2015).

  10. 10.

    Cho, H. et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science 350, 1222–1225 (2015).

  11. 11.

    Wang, N. N. et al. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells. Nat. Photon. 10, 699–704 (2016).

  12. 12.

    Xiao, Z. et al. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites. Nat. Photon. 11, 108–115 (2017).

  13. 13.

    Zhang, S. T. et al. Efficient red perovskite light-emitting diodes based on solution-processed multiple quantum wells. Adv. Mater. 29, 1606600 (2017).

  14. 14.

    Meng, L. et al. Pure formamidinium-based perovskite light-emitting diodes with high efficiency and low driving voltage. Adv. Mater. 29, 1603826 (2017).

  15. 15.

    Yuan, M. J. et al. Perovskite energy funnels for efficient light-emitting diodes. Nat. Nanotech. 11, 872–877 (2016).

  16. 16.

    Quan, L. N. et al. Tailoring the energy landscape in quasi-2D halide perovskites enables efficient green-light emission. Nano Lett. 17, 3701–3709 (2017).

  17. 17.

    Blancon, J. C. et al. Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites. Science 355, 1288–1291 (2017).

  18. 18.

    Yang, X. L. et al. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation. Nat. Commun. 9, 1169 (2018).

  19. 19.

    Protesescu, L. et al. Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Lett. 15, 3692–3696 (2015).

  20. 20.

    De Roo, J. et al. Highly dynamic ligand binding and light absorption coefficient of cesium lead bromide perovskite nanocrystals. ACS Nano 10, 2071–2081 (2016).

  21. 21.

    Swarnkar, A. et al. Colloidal CsPbBr3 perovskite nanocrystals: luminescence beyond traditional quantum dots. Angew. Chem. Int. Ed. 54, 15424–15428 (2015).

  22. 22.

    Jellicoe, T. C. et al. Synthesis and optical properties of lead-free cesium tin halide perovskite nanocrystals. J. Am. Chem. Soc. 138, 2941–2944 (2016).

  23. 23.

    Li, X. M. et al. CsPbX3 quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes. Adv. Funct. Mater. 26, 2435–2445 (2016).

  24. 24.

    Pan, J. et al. Air-stable surface-passivated perovskite quantum dots for ultra-robust, single- and two-photon-induced amplified spontaneous emission. J. Phys. Chem. Lett. 6, 5027–5033 (2015).

  25. 25.

    Leng, M. et al. Lead-free, blue emitting bismuth halide perovskite quantum dots. Angew. Chem. Int. Ed. 55, 15012–15016 (2016).

  26. 26.

    Pan, A. Z. et al. Insight into the ligand-mediated synthesis of colloidal CsPbBr3 perovskite nanocrystals: the role of organic acid, base, and cesium precursors. ACS Nano 10, 7943–7954 (2016).

  27. 27.

    Song, J. et al. Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3). Adv. Mater. 27, 7162–7167 (2015).

  28. 28.

    Li, G. et al. Highly efficient perovskite nanocrystal light-emitting diodes enabled by a universal crosslinking method. Adv. Mater. 28, 3528–3534 (2016).

  29. 29.

    Pan, J. et al. Highly efficient perovskite-quantum-dot light-emitting diodes by surface engineering. Adv. Mater. 28, 8718–8725 (2016).

  30. 30.

    Li, J. et al. 50-fold EQE improvement up to 6.27% of solution-processed all-inorganic perovskite CsPbBr3 QLEDs via surface ligand density control. Adv. Mater. 29, 1603885 (2017).

  31. 31.

    Chiba, T. et al. High-efficiency perovskite quantum-dot light-emitting devices by effective washing process and interfacial energy level alignment. ACS Appl. Mater. Interfaces 9, 18054–18060 (2017).

  32. 32.

    Krieg, F. et al. Colloidal CsPbX3 (X = CI, Br, I) Nanocrystals 2.0: zwitterionic capping ligands for improved durability and stability. ACS Energy Lett. 3, 641–646 (2018).

  33. 33.

    Tan, Y. S. et al. Highly luminescent and stable perovskite nanocrystals with octylphosphonic acid as a ligand for efficient light-emitting diodes. ACS Appl. Mater. Interfaces 10, 3784–3792 (2018).

  34. 34.

    Pan, J. et al. Bidentate ligand-passivated CsPbI3 perovskite nanocrystals for stable near-unity photoluminescence quantum yield and efficient red light-emitting diodes. J. Am. Chem. Soc. 140, 562–565 (2018).

  35. 35.

    Wu, C. et al. Improved performance and stability of all-inorganic perovskite light-emitting diodes by antisolvent vapor treatment. Adv. Funct. Mater. 27, 1700338 (2017).

  36. 36.

    Zhang, X. L. et al. All-inorganic perovskite nanocrystals for high-efficiency light emitting diodes: dual-phase CsPbBr3–CsPb2Br5 composites. Adv. Funct. Mater. 26, 4595–4600 (2016).

  37. 37.

    Zhang, X. et al. Enhancing the brightness of cesium lead halide perovskite nanocrystal based green light-emitting devices through the interface engineering with perfluorinated ionomer. Nano Lett. 16, 1415–1420 (2016).

  38. 38.

    Liu, P. Z. et al. Halide-rich synthesized cesium lead bromide perovskite nanocrystals for light-emitting diodes with improved performance. Chem. Mater. 29, 5168–5173 (2017).

  39. 39.

    Yassitepe, E. et al. Amine-free synthesis of cesium lead halide perovskite quantum dots for efficient light-emitting diodes. Adv. Funct. Mater. 26, 8757–8763 (2016).

  40. 40.

    Davis, N. J. L. K. et al. Photon reabsorption in mixed CsPbCl3:CsPbl3 perovskite nanocrystal films for light-emitting diodes. J. Phys. Chem. C 121, 3790–3796 (2017).

  41. 41.

    Zou, C., Huang, C. Y., Sanehira, E. M., Luther, J. M. & Lin, L. Y. Highly stable cesium lead iodide perovskite quantum dot light-emitting diodes. Nanotechnology 28, 455201 (2017).

  42. 42.

    Swarnkar, A. et al. Quantum dot-induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics. Science 354, 92–95 (2016).

  43. 43.

    Zhang, X. et al. Bright perovskite nanocrystal films for efficient light-emitting devices. J. Phys. Chem. Lett. 7, 4602–4610 (2016).

  44. 44.

    Nedelcu, G. et al. Fast anion-exchange in highly luminescent nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, I). Nano Lett. 15, 5635–5640 (2015).

  45. 45.

    Akkerman, Q. A. et al. Tuning the optical properties of cesium lead halide perovskite nanocrystals by anion exchange reactions. J. Am. Chem. Soc. 137, 10276–10281 (2015).

  46. 46.

    Ramasamy, P. et al. All-inorganic cesium lead halide perovskite nanocrystals for photodetector applications. Chem. Commun. 52, 2067–2070 (2016).

  47. 47.

    Vashishtha, P. & Halpert, J. E. Field-driven ion migration and color instability in red-emitting mixed halide perovskite nanocrystal light-emitting diodes. Chem. Mater. 29, 5965–5973 (2017).

  48. 48.

    Koscher, B. A., Swabeck, J. K., Bronstein, N. D. & Alivisatos, A. P. Essentially trap-free CsPbBr3 colloidal nanocrystals by postsynthetic thiocyanate surface treatment. J. Am. Chem. Soc. 139, 6566–6569 (2017).

  49. 49.

    Kumar, S. et al. Ultrapure green light-emitting diodes using two-dimensional formamidinium perovskites: achieving Recommendation 2020 Color Coordinates. Nano Lett. 17, 5277–5284 (2017).

  50. 50.

    Li, X. Y. et al. Bright colloidal quantum dot light-emitting diodes enabled by efficient chlorination. Nat. Photon. 12, 159–164 (2018).

Download references


The authors acknowledge a ‘Grant-in Aid for Scientific Research A’ (grant no. 15H02203) from the Japan Society for the Promotion of Science (JSPS). The authors also thank the Center of Innovation Program and the Strategic Promotion of Innovative R&D Program of the Japan Science and Technology Agency (JST). The authors thank Y. Watanabe and K. Udagawa for help.

Author information

Author notes

    • Yong-Jin Pu

    Present address: RIKEN Center for Emergent Matter Science, Saitama, Japan


  1. Graduate School of Organic Materials Science, Yamagata, Japan

    • Takayuki Chiba
    • , Yukihiro Hayashi
    • , Hinako Ebe
    • , Keigo Hoshi
    • , Jun Sato
    • , Shugo Sato
    • , Yong-Jin Pu
    • , Satoru Ohisa
    •  & Junji Kido
  2. Research Center for Organic Materials, Yamagata, Japan

    • Takayuki Chiba
    • , Satoru Ohisa
    •  & Junji Kido
  3. Frontier Center for Organic Materials, Yamagata University, Yamagata, Japan

    • Takayuki Chiba
    • , Satoru Ohisa
    •  & Junji Kido


  1. Search for Takayuki Chiba in:

  2. Search for Yukihiro Hayashi in:

  3. Search for Hinako Ebe in:

  4. Search for Keigo Hoshi in:

  5. Search for Jun Sato in:

  6. Search for Shugo Sato in:

  7. Search for Yong-Jin Pu in:

  8. Search for Satoru Ohisa in:

  9. Search for Junji Kido in:


T.C. conceived and designed the experiments. Y.H. and J.S. fabricated the devices. Y.H., H.E. and K.H. performed the TEM, SEM, AFM, UV–vis absorption, photoluminescence and photoluminescence lifetime measurements. H.E. performed the XRD measurements. T.C. and S.O. performed the XPS and UPS measurements. Y.H. and S.S. developed and performed the anion-exchange process. T.C. and Y.J.P. assisted with the materials and LED characterization process. J.K. supervised this work. T.C. wrote the manuscript. All the authors have read and commented on the manuscript.

Competing interests

The authors declare no competing interests.

Corresponding authors

Correspondence to Takayuki Chiba or Junji Kido.

Supplementary information

  1. Supplementary Information

    Supplementary figures and tables.

About this article

Publication history