Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Highly stretchable organic electrochemical transistors with strain-resistant performance

Abstract

Realizing fully stretchable electronic materials is central to advancing new types of mechanically agile and skin-integrable optoelectronic device technologies. Here we demonstrate a materials design concept combining an organic semiconductor film with a honeycomb porous structure with biaxially prestretched platform that enables high-performance organic electrochemical transistors with a charge transport stability over 30–140% tensional strain, limited only by metal contact fatigue. The prestretched honeycomb semiconductor channel of donor–acceptor polymer poly(2,5-bis(2-octyldodecyl)-3,6-di(thiophen-2-yl)-2,5-diketo-pyrrolopyrrole-alt-2,5-bis(3-triethyleneglycoloxy-thiophen-2-yl) exhibits high ion uptake and completely stable electrochemical and mechanical properties over 1,500 redox cycles with 104 stretching cycles under 30% strain. Invariant electrocardiogram recording cycles and synapse responses under varying strains, along with mechanical finite element analysis, underscore that the present stretchable organic electrochemical transistor design strategy is suitable for diverse applications requiring stable signal output under deformation with low power dissipation and mechanical robustness.

Your institute does not have access to this article

Access options

Buy article

Get time limited or full article access on ReadCube.

$32.00

All prices are NET prices.

Fig. 1: Polymer chemical, redox, optical and electrical properties and film morphology.
Fig. 2: FEA simulation, stretchability and electrical properties of d- and h-films.
Fig. 3: Fabrication of prestretched OECT and SEM images of psd- and psh-DPP-g2T films.
Fig. 4: Electrical properties of psh-DPP-g2T OECTs under various strains.
Fig. 5: ECG recording and simulated synaptic characteristics.

Data availability

Source data are provided with this paper. The remaining data are available from the corresponding authors upon reasonable request.

Code availability

The codes or algorithms used to analyse the data reported in this study are available from the corresponding authors upon reasonable request.

References

  1. Paulsen, B. D., Tybrandt, K., Stavrinidou, E. & Rivnay, J. Organic mixed ionic-electronic conductors. Nat. Mater. 19, 13–26 (2020).

    CAS  Article  Google Scholar 

  2. Zeglio, E. & Inganas, O. Active materials for organic electrochemical transistors. Adv. Mater. 30, 1800941 (2018).

    Article  CAS  Google Scholar 

  3. Khodagholy, D. et al. In vivo recordings of brain activity using organic transistors. Nat. Commun. 4, 1575 (2013).

    Article  CAS  Google Scholar 

  4. White, H. S., Kittlesen, G. P. & Wrighton, M. S. Chemical derivatization of an array of three gold microelectrodes with polypyrrole: fabrication of a molecule-based transistor. J. Am. Chem. Soc. 106, 5375–5377 (1984).

    CAS  Article  Google Scholar 

  5. Li, Y., Wang, N., Yang, A., Ling, H. & Yan, F. Biomimicking stretchable organic electrochemical transistor. Adv. Electron. Mater. 5, 1900566 (2019).

    CAS  Article  Google Scholar 

  6. Giovannitti, A. et al. Energetic control of redox-active polymers toward safe organic bioelectronic materials. Adv. Mater. 32, 1908047 (2020).

    CAS  Article  Google Scholar 

  7. Paterson, A. F. et al. Water stable molecular n-doping produces organic electrochemical transistors with high transconductance and record stability. Nat. Commun. 11, 3004 (2020).

    CAS  Article  Google Scholar 

  8. Keene, S. T. et al. A biohybrid synapse with neurotransmitter-mediated plasticity. Nat. Mater. 19, 969–973 (2020).

    CAS  Article  Google Scholar 

  9. Bischak, C. G., Flagg, L. Q. & Ginger, D. S. Ion exchange gels allow organic electrochemical transistor operation with hydrophobic polymers in aqueous solution. Adv. Mater. 32, 2002610 (2020).

    CAS  Article  Google Scholar 

  10. Fan, X. et al. PEDOT:PSS for flexible and stretchable electronics: modifications, strategies, and applications. Adv. Sci. 6, 1900813 (2019).

    CAS  Article  Google Scholar 

  11. Zhao, J. et al. Recent developments of truly stretchable thin film electronic and optoelectronic devices. Nanoscale 10, 5764–5792 (2018).

    CAS  Article  Google Scholar 

  12. Lee, Y. et al. Stretchable organic optoelectronic sensorimotor synapse. Sci. Adv. 4, 7387 (2018).

    Article  CAS  Google Scholar 

  13. Marchiori, B., Delattre, R., Hannah, S., Blayac, S. & Ramuz, M. Laser-patterned metallic interconnections for all stretchable organic electrochemical transistors. Sci. Rep. 8, 8477 (2018).

  14. Zhang, S. M. et al. Patterning of stretchable organic electrochemical transistors. Chem. Mater. 29, 3126–3132 (2017).

    CAS  Article  Google Scholar 

  15. Lee, W. et al. Nonthrombogenic, stretchable, active multielectrode array for electroanatomical mapping. Sci. Adv. 4, 2426 (2018).

    Article  CAS  Google Scholar 

  16. Yang, A. et al. Fabric organic electrochemical transistors for biosensors. Adv. Mater. 30, 1800051 (2018).

    Article  CAS  Google Scholar 

  17. Kim, J. T. et al. Three-dimensional writing of highly stretchable organic nanowires. ACS Macro. Lett. 1, 375–379 (2012).

    CAS  Article  Google Scholar 

  18. Marchiori, B., Delattre, R., Hannah, S., Blayac, S. & Ramuz, M. Laser-patterned metallic interconnections for all stretchable organic electrochemical transistors. Sci. Rep. 8, 8847 (2018).

    Article  CAS  Google Scholar 

  19. Inal, S., Rivnay, J., Suiu, A.-O., Malliaras, G. G. & McCulloch, I. Conjugated polymers in bioelectronics. Acc. Chem. Res. 51, 1368–1376 (2018).

    CAS  Article  Google Scholar 

  20. ElMahmoudy, M. et al. Tailoring the electrochemical and mechanical properties of PEDOT:PSS films for bioelectronics. Macromol. Mater. Eng. 302, 1600497 (2017).

    Article  CAS  Google Scholar 

  21. Reynolds, V. G., Oh, S., Xie, R. & Chabinyc, M. L. Model for the electro-mechanical behavior of elastic organic transistors. J. Mater. Chem. C 8, 9276–9285 (2020).

    CAS  Article  Google Scholar 

  22. Jang, S. et al. A high aspect ratio serpentine structure for use as a strain-insensitive, stretchable transparent conductor. Small 14, 1702818 (2018).

    Article  CAS  Google Scholar 

  23. Moser, M. et al. Polaron delocalization in donor–acceptor polymers and its impact on organic electrochemical transistor performance. Angew. Chem. Int. Ed. 60, 7777–7785 (2020).

    Article  CAS  Google Scholar 

  24. Nielsen, C. B. et al. Molecular design of semiconducting polymers for high-performance organic electrochemical transistors. J. Am. Chem. Soc. 138, 10252–10259 (2016).

    CAS  Article  Google Scholar 

  25. Flagg, L. Q., Giridharagopal, R., Guo, J. J. & Ginger, D. S. Anion-dependent doping and charge transport in organic electrochemical transistors. Chem. Mater. 30, 5380–5389 (2018).

    CAS  Article  Google Scholar 

  26. Khodagholy, D. et al. High transconductance organic electrochemical transistors. Nat. Commun. 4, 2133 (2013).

    Article  CAS  Google Scholar 

  27. Zhang, X. et al. Breath figure–derived porous semiconducting films for organic electronics. Sci. Adv. 6, 1042 (2020).

    Article  CAS  Google Scholar 

  28. Huang, L. et al. Porous semiconducting polymers enable high-performance electrochemical transistors. Adv. Mater. 33, 2007041 (2021).

    CAS  Article  Google Scholar 

  29. Zhang, A., Bai, H. & Li, L. Breath figure: a nature-inspired preparation method for ordered porous films. Chem. Rev. 115, 9801–9868 (2015).

    CAS  Article  Google Scholar 

  30. Yabu, H. et al. Preparation of highly oriented nano-pit arrays by thermal shrinking of honeycomb-patterned polymer films. Adv. Mater. 20, 4200–4204 (2008).

    CAS  Google Scholar 

  31. Sun, H. et al. n-Type organic electrochemical transistors: materials and challenges. J. Mater. Chem. C 6, 11778–11784 (2018).

    CAS  Article  Google Scholar 

  32. Giovannitti, A. et al. Redox-stability of alkoxy-BDT copolymers and their use for organic bioelectronic devices. Adv. Funct. Mater. 28, 1706325 (2018).

    Article  CAS  Google Scholar 

  33. Wang, Y. et al. Hybrid alkyl–ethylene glycol side chains enhance substrate adhesion and operational stability in accumulation mode organic electrochemical transistors. Chem. Mater. 31, 9797–9806 (2019).

    CAS  Article  Google Scholar 

  34. Lei, T. et al. Engineering donor–acceptor conjugated polymers for high-performance and fast-response organic electrochemical transistors. J. Mater. Chem. C 9, 4927–4934 (2021).

    Article  Google Scholar 

  35. Wu, X. et al. Enhancing the electrochemical doping efficiency in diketopyrrolopyrrole‐based polymer for organic electrochemical transistors. Adv. Electron. Mater. 7, 2000701 (2021).

    CAS  Article  Google Scholar 

  36. Giovannitti, A. et al. Controlling the mode of operation of organic transistors through side-chain engineering. Proc. Natl Acad. Sci. USA 113, 12017–12022 (2016).

    CAS  Article  Google Scholar 

  37. Moser, M. et al. Side chain redistribution as a strategy to boost organic electrochemical transistor performance and stability. Adv. Mater. 32, 2002748 (2020).

  38. Rogers, J. A., Someya, T. & Huang, Y. G. Materials and mechanics for stretchable electronics. Science 327, 1603–1607 (2010).

    CAS  Article  Google Scholar 

  39. Chortos, A. & Bao, Z. Skin-inspired electronic devices. Mater. Today 17, 321–331 (2014).

    CAS  Article  Google Scholar 

  40. Kim, D.-H. et al. Ultrathin silicon circuits with strain-isolation layers and mesh layouts for high-performance electronics on fabric, vinyl, leather, and paper. Adv. Mater. 21, 3703–3707 (2009).

    CAS  Article  Google Scholar 

  41. Choi, S. et al. Highly conductive, stretchable and biocompatible Ag–Au core–sheath nanowire composite for wearable and implantable bioelectronics. Nat. Nanotechnol. 13, 1048–1056 (2018).

    CAS  Article  Google Scholar 

  42. Lee, H. B. et al. Mogul-patterned elastomeric substrate for stretchable electronics. Adv. Mater. 28, 3069–3067 (2016).

    CAS  Article  Google Scholar 

  43. Karakoç, A., Santaoja, K. & Freund, J. Simulation experiments on the effective in-plane compliance of the honeycomb materials. Compos. Struct. 96, 312–320 (2013).

    Article  Google Scholar 

  44. Abd El-Sayed, F., Jones, R. & Burgess, I. J. C. A theoretical approach to the deformation of honeycomb based composite materials. Composites 10, 209–214 (1979).

    Article  Google Scholar 

  45. Zheng, Y. et al. An intrinsically stretchable high-performance polymer semiconductor with low crystallinity. Adv. Funct. Mater. 29, 1905340 (2019).

    CAS  Article  Google Scholar 

  46. Wu, H.-C. et al. Isoindigo-based semiconducting polymers using carbosilane side chains for high performance stretchable field-effect transistors. Macromolecules 49, 8540–8548 (2016).

    CAS  Article  Google Scholar 

  47. Xu, J. et al. Highly stretchable polymer semiconductor films through the nanoconfinement effect. Science 355, 59–64 (2017).

    CAS  Article  Google Scholar 

  48. Sugiyama, F. et al. Effects of flexibility and branching of side chains on the mechanical properties of low-bandgap conjugated polymers. Polym. Chem. 9, 4354–4363 (2018).

    CAS  Article  Google Scholar 

  49. McCoul, D., Hu, W., Gao, M., Mehta, V. & Pei, Q. Recent advances in stretchable and transparent electronic materials. Adv. Electron. Mater. 2, 1500407 (2016).

    Article  CAS  Google Scholar 

  50. Seker, E., Reed, M., Utz, M. & Begley, M. R. Flexible and conductive bilayer membranes of nanoporous gold and silicone: synthesis and characterization. Appl. Phys. Lett. 92, 154101–154103 (2008).

    Article  CAS  Google Scholar 

  51. Görrn, P., Cao, W. & Wagner, S. Isotropically stretchable gold conductors on elastomeric substrates. Soft. Matter 7, 7177–7180 (2011).

    Article  CAS  Google Scholar 

  52. Jones, J., Lacour, S. P., Wagner, S. & Suo, Z. Stretchable wavy metal interconnects. J. Vac. Sci. Technol. A 22, 1723–1725 (2004).

    CAS  Article  Google Scholar 

  53. Xu, J. et al. Multi-scale ordering in highly stretchable polymer semiconducting films. Nat. Mater. 18, 594–601 (2019).

    CAS  Article  Google Scholar 

  54. Kaltenbrunner, M. et al. An ultra-lightweight design for imperceptible plastic electronics. Nature 499, 458–463 (2013).

    CAS  Article  Google Scholar 

  55. Wang, Y. et al. Standing enokitake-like nanowire films for highly stretchable elastronics. ACS Nano 12, 9742–9749 (2018).

    CAS  Article  Google Scholar 

Download references

Acknowledgements

We thank Air Force Office of Scientific Research (AFOSR) (FA9550-18-1-0320), the Northwestern University Materials Research Science and Engineering Center (NU-MRSEC) (NSF DMR-1720139;) and Flexterra Corporation for support of this research. This work made use of the J. B. Cohen X-Ray Diffraction Facility; the Electron Probe Instrumentation Center (EPIC) facility, Keck-II facility, the Scanned Probe Imaging and Development (SPID) facility and Northwestern University Micro/Nano Fabrication Facility (NUFAB) of the Northwestern University’s Atomic and Nanoscale Characterization Experimental Center (NUANCE) at Northwestern University, which received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF NNCI-1542205); the MRSEC programme (NSF DMR-1121262); the International Institute for Nanotechnology; the Keck Foundation; and the State of Illinois, through the International Institute for Nanotechnology. Use of the Advanced Photon Source (beamline 8-ID-E), an Office of Science User Facility operated for the US Department of Energy Office of Science by Argonne National Laboratory, was supported by the US Department of Energy under contract DE-AC02-06CH11357. We also acknowledge the support from the National Natural Science Foundation of China (grant nos 61804073, 12072057, U1830207), Dalian Outstanding Young Talents in Science and Technology (grant no. 2021RJ06), LiaoNing Revitalization Talents Program (grant no. XLYC2007196), the Fundamental Research Funds for the Central Universities (grant no. DUT20RC(3)032), City University of Hong Kong (grants nos 9610423, 9667199), the Research Grants Council of the Hong Kong Special Administrative Region (grant no. 21210820), the Intelligence Community Postdoctoral Research Fellowship Program and Guangdong Provincial Key Laboratory Program (2021B1212040001) from the Department of Science and Technology of Guangdong Province.

Author information

Authors and Affiliations

Authors

Contributions

J.C., W.H. and A.F. designed the experiments. J.C., W.H., D. Zheng, X.Z., D. Zhao, N.S. and H.C. fabricated and characterized the devices. W.H., Y. Chen and R.M.P. performed the GIWAXS. J.S. calculated the relative degree of crystallinity (rDoC). Z.X., Z.G. and X.Y. performed the mechanical modelling and simulation. J.C., W.H., J.Y., X.G., Y. Cheng, T.J.M. and A.F. wrote the paper. All authors discussed the results and commented on the manuscript.

Corresponding authors

Correspondence to Wei Huang, Ding Zheng, Zhaoqian Xie, Xinge Yu, Tobin J. Marks or Antonio Facchetti.

Ethics declarations

Competing interests

A.F. is the CTO of Flexterra Corporation. The remaining authors declare no competing interests.

Peer review

Peer review information

Nature Materials thanks Fabio Cicoira, Daniel Simon and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Cyclic voltammetry (CV) and UV−vis−NIR spectro-electrochemical measurement.

Cyclic voltammetry of (a) DPP-g2T and (b) DPP-2T drop-cast films on Pt electrodes. The oxidation onsets are +0.34 and +0.75 V for DPP-g2T and DPP-2T, respectively, indicating that DPP-g2T is more readily oxidized. The spectro-electrochemical properties of (c,e) DPP-g2T and control (d,f) DPP-2T films on ITO/glass were characterized under biases ranging from 0.0 V to +0.8 V (in 0.1 M aqueous KPF6) to investigate the electrochemical doping efficiency. For DPP-g2T, upon application of a low bias the intensities of the π–π* absorption (420 nm), intramolecular charge transfer (ICT, 783 nm), and π–π aggregate (848 nm) peaks decrease and polaronic absorption at longer wavelengths (> 1000 nm) increases, indicating full and efficient doping of DPP-g2T. In contrast, the DPP-2T films show no obvious absorption changes at biases ≤ +0.5 V and even at biases ≥ +0.8 V, while the absorption features of the neutral polymer persist, indicating poor electrochemical doping efficiency. In addition, the absorption spectrum of DPP-g2T returns to the original line shape when applying a bias of –0.2 V, while that of DPP-2T only partially recovers, indicating inferior redox stability, a result confirmed by CV measurements on the same platform.

Source data

Extended Data Fig. 2 Atomic force microscopy (AFM) measurements.

(a) Atomic force microscopy (AFM) images and (b) corresponding line cuts of the indicated DPP-2T and DPP-g2T d- and h-films. (c)The scheme of calculated thickness of h-films. The average film thickness and wall loading of h-films were calculated from the AFM software. Transferred d-films are relatively smooth with RMS roughness (σRMS) = 0.75 nm (d-DPP-2T) and 0.89 nm (d-DPP-g2T). For the transferred h-films, h-DPP-g2T exhibits a uniform honeycomb structure with an average pore diameter of 1.33±0.15 μm and wall height of 183±34 nm. In contrast, the h-DPP-2T films exhibit very non-uniform craters of diameters ranging from 1.3~3.6 μm (average = 2.14±0.83 μm) and wall height of 322±86 nm.

Source data

Extended Data Fig. 3 2D-GIWAXS measurement.

(a)2D-GIWAXS images and (b)corresponding one-dimensional line-cuts for d- and h-DPP-2T and DPP-g2T films. Solid line: out-of-plane line cuts; dashed line: in-plane line cuts. (c) The Lorentz corrected partial pole figure and (d) calculated relative degree of crystallinity for dense DPP-2T and DPP-g2T films. All films are textured and exhibit similar reflections, demonstrating that porosity does not alter the overall film microstructure and polymer backbone orientation. Thus, distinct (100) and (200) reflections associated with a lamellar d-spacing of 18.9 Å, as well as a (010) reflection due to the backbone π-π stacking measuring 3.7 Å are observed in both out-of-plane and in-plane directions for the h- and d-DPP-2T films. In contrast, only a stronger (100) reflection (d-spacing=19.6 Å) in the in-plane direction and a (010) reflection (π-π stacking distance = 3.9 Å) in the out-of-plane direction are detected for the h- and d-DPP-g2T films. The relative degree of crystallinity for d-DPP-g2T was calculated to be 0.766 ± 0.007 that of d-DPP-2T. These data demonstrate that the DPP-g2T crystallinity is notablely lower than that of DPP-2T, it is less tightly packed, and DPP-g2T backbone is preferentially oriented π-face-on.

Source data

Extended Data Fig. 4 Scanning electron microscopy (SEM) images.

(a) Scanning electron microscopy (SEM) images of h-DPP-g2T film after KPF6 electrolyte evaporation. (b) SEM/energy-dispersive X-ray spectroscopy (SEM/EDS) mapping of (b) carbon, (c) fluorine, (d) phosphorus, and (e) potassium. (f) SEM image, along with carbon (red) and fluorine (blue) element mapping show excellent matching. The results show that the electrolyte solution penetrates into the h-DPP-g2T pores since cubic KPF6 crystals are detected in the pore areas and but are not located on the honeycomb top walls.

Extended Data Fig. 5 Tensile stress results on d-/h-DPP-2T and d-/h-DPP-g2T films.

SEM images of d-DPP-2T films with (a) 0% and (b) 30% strain; h-DPP-2T films with (c) 0% and (d) 60% strain; d-DPP-g2T films with (e) 0% and (f) 60% strain; h-DPP-g2T films with (g) 0% and (h) 60% strain (The red square stands out the cracks).

Extended Data Fig. 6 Schematic illustrations for OECT fabrication using stretched semiconductor films and film morphology.

(a) Schematic illustrations for OECT fabrication using stretched semiconductor films: Transfer of h- or d-DPP-g2T films on SEBS (Step 1), stretching at different strains (Step 2); Upon stretching, the h- or d-DPP-g2T/SEBS film were adhered to a metal sheet by using a 3MTM VHBTM double side tape (Step 3); The patterned Au source/drain electrodes (W/L = 600/25 μm) on OTS-modified Si/SiO2 wafer was adhered to the h- or d-DPP-g2T/SEBS/metal sheet (Step 4); Lamination of Au S/D electrodes onto the surface of DPP-g2T film (Step 5); Application of aqueous KPF6 electrolyte and Ag/AgCl gate electrode to complete the OECT architecture(Step 6). SEM images of OECTs with (b) 60% and (c) 90% stretched d-DPP-g2T and h-DPP-g2T, respectively.

Extended Data Fig. 7 Electrical properties of stretched d-DPP-g2T films under different strains.

(a) Transfer and transconductance curves and (b) gm /Ion of OECTs based on d-DPP-g2T under different strains with transferred Au as S/D electrodes.

Source data

Extended Data Fig. 8 Electrical properties of stretched h-DPP-g2T films under different strains.

(a) Transfer and transconductance curves and (b) gm /Ion of OECTs based on h-DPP-g2T under different strains with transferred Au as S/D electrodes.

Source data

Extended Data Fig. 9 SEM images for a psh-DPP-2gT (εps = 100%) films and gm /Ion for psh-DPP-2gT (εps = 100%) OECTs based on Ecoflex/SEBS bilayer substrates.

(a) SEM images for a psh-DPP-2gT (εps = 100%) under 0%, 40%, and 80% strains. Note obvious Au line rupture when the h-film remains connected. (b) gm /Ion for psh-DPP-2gT (εps = 100%) OECTs based on Ecoflex/SEBS bilayer substrates under various strains (from 0% to 200%) in ε or ε// direction. The insert is the optical image of the stretched OECT device.

Source data

Extended Data Fig. 10 Synaptic characteristics of psh-DPP-2gT (εps = 100%) OECT.

Synaptic characteristics of psh-DPP-2gT (εps = 100%) OECT (electrolyte: aqueous KClO4) under 0%, and 60% elongation strains in ε or ε// direction. (a) PPF (A2/A1) based on different interspike intervals (from 100 ms to 1900 ms). (b) EPSC versus spike number under different spike frequencies. (c,d,e) EPSC gain (from A10/A1 to A70/A1) with spike frequency from 0.5 to 5 Hz.

Source data

Supplementary information

Supplementary Information

Supplementary Figs. 1–53, Tables 1–3 and details of the experimental procedures, synthesis and characterization of polymers, optical images, OECT characterizations, AFM images and SEM images.

Source data

Source Data Fig. 1

UV, cyclic voltammetry and OECT properties.

Source Data Fig. 2

FEA simulation and tensile results and electrical properties of stretched DPP-g2T films.

Source Data Fig. 4

Electrical properties of psh-DPP-2gT (εps = 100%) OECTs.

Source Data Fig. 5

ECG recording data.

Source Data Extended Data Fig. 1

Cyclic voltammetry and UV−visible−near-infrared data.

Source Data Extended Data Fig. 2

AFM line-cut data.

Source Data Extended Data Fig. 3

2D-GIWAXS data.

Source Data Extended Data Fig. 7

Electrical properties of OECTs based on d-DPP-2gT under different strains.

Source Data Extended Data Fig. 8

Electrical properties of OECTs based on h-DPP-2gT under different strains.

Source Data Extended Data Fig. 9

Electrical properties of psh-DPP-2gT OECTs based on Ecoflex/SEBS bilayer substrates.

Source Data Extended Data Fig. 10

Synaptic characteristics of psh-DPP-2gT (εps = 100%) OECT.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Chen, J., Huang, W., Zheng, D. et al. Highly stretchable organic electrochemical transistors with strain-resistant performance. Nat. Mater. 21, 564–571 (2022). https://doi.org/10.1038/s41563-022-01239-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-022-01239-9

Further reading

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing