Iron–chromium and nickel–chromium binary alloys containing sufficient quantities of chromium serve as the prototypical corrosion-resistant metals owing to the presence of a nanometre-thick protective passive oxide film1,2,3,4,5,6,7,8. Should this film be compromised by a scratch or abrasive wear, it reforms with little accompanying metal dissolution, a key criterion for good passive behaviour. This is a principal reason that stainless steels and other chromium-containing alloys are used in critical applications ranging from biomedical implants to nuclear reactor components9,10. Unravelling the compositional dependence of this electrochemical behaviour is a long-standing unanswered question in corrosion science. Herein, we develop a percolation theory of alloy passivation based on two-dimensional to three-dimensional crossover effects that accounts for selective dissolution and the quantity of metal dissolved during the initial stage of passive film formation. We validate this theory both experimentally and by kinetic Monte Carlo simulation. Our results reveal a path forward for the design of corrosion-resistant metallic alloys.
This is a preview of subscription content, access via your institution
Subscribe to Nature+
Get immediate online access to Nature and 55 other Nature journal
Subscribe to Journal
Get full journal access for 1 year
only $9.92 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
The data used in this study are available from the corresponding author upon request.
The KMC and data analysis computer codes used in this study are available from the corresponding author upon request.
McCafferty, E. Introduction to Corrosion Science (Springer, 2010).
Uhlig, H. H. & Woodside, G. E. Anodic polarization of passive and non-passive chromium–iron alloys. J. Phys. Chem. 57, 280–283 (1953).
Kirchheim, R. et al. The passivity of iron-chromium alloys. Corros. Sci. 29, 899–917 (1989).
King, P. F. & Uhlig, H. H. Passivity in the iron-chromium binary alloys. J. Phys. Chem. 63, 2026–2032 (1959).
Williams, D. E., Newman, R. C., Song, Q. & Kelly, R. G. Passivity breakdown and pitting corrosion of binary alloys. Nature 350, 216–219 (1991).
Diawara, B., Beh, Y.-A. & Marcus, P. Nucleation and growth of oxide layers on stainless steels (FeCr) using a virtual oxide layer model. J. Phys. Chem. C 114, 19299–19307 (2010).
Hamm, D., Ogle, K., Olsson, C.-O., Weber, S. & Landolt, S. Passivation of Fe–Cr alloys studied with ICP-AES and EQCM. Corros. Sci. 44, 1443–1456 (2002).
Davenport, A. J. et al. In situ synchrotron X-ray microprobe studies of passivation thresholds in Fe-Cr alloys. J. Electrochem. Soc. 148, B217–B221 (2001).
Odette, R. & Zinkle, S. Structural Alloys for Nuclear Energy Applications (Elsevier, 2019).
Niinomi, M., Nakai, M. & Hieda, J. Development of new metallic alloys for biomedical applications. Acta Biomater. 11, 3888–3903 (2012).
Miracle, D. B. & Senkov, O. N. A critical review of high entropy alloys and related concepts. Acta Mater. 122, 448–511 (2017).
George, E. P., Raabe, D. & Ritchie, R. O. High-entropy alloys. Nat. Rev. Mater. 4, 515–534 (2019).
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R. & Stocks, G. M. Criteria for predicting the formation of single-phase high entropy alloys. Phys. Rev. X 5, 011041 (2015).
Huang, L.-F., Scully, J. R. & Rondenelli, J. M. Modeling corrosion with first principles electrochemical phase diagrams. Annu. Rev. Mater. Res. 49, 53–77 (2019).
Huang, L.-F. & Rondenelli, J. M. Electrochemical phase diagrams of Ni from ab initio simulations: role of exchange interactions on accuracy. J. Phys. Condens. Mat. 29, 475501 (2017).
Yu, X. et al. Nonequilibrium solute capture in passivating oxide films. Phys. Rev. Lett. 121, 145701 (2018).
Sherman, Q., Voorhees, P. W. & Marks, L. D. Thermodynamics of solute capture during the oxidation of multicomponent metals. Acta Mater. 181, 584–594 (2019).
Frankenthal, R. P. On the passivity of iron‐chromium alloys I. Reversible primary passivation and secondary film formation. J. Electrochem. Soc. 114, 542–547 (1967).
Bastek, P. D., Newman, R. C. & Kelly, R. G. Measurement of passive film effects on scratched electrode behavior. J. Electrochem. Soc. 140, 1884–1889 (1993).
Sieradzki, K. & Newman, R. C. A percolation model for passivation in stainless steels. J. Electrochem. Soc. 133, 1979–1980 (1985).
Shannon, R. D. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Cryst. A32, 751–767 (1976) .
Liu, M., Aiello, A., Xie, Y. & Sieradzki, K. The effect of short range order on the passivation of Fe-Cr alloys. J. Electrochem. Soc. 165, C830–C834 (2018).
Shante, V. K. S. & Kirkpatrick, S. An introduction to percolation theory. Adv. Phys. 20, 325–357 (1971).
Sykes, M. F. & Glen, M. Percolation processes in two dimensions. I. Low-density series expansions. J. Phys. A Math. Gen. 9, 87–95 (1976).
Sykes, M. F. & Glen, M. Percolation processes in three dimensions. J. Phys. A Math. Gen. 9, 1705–1712 (1976).
Stauffer, D. & Aharony, A. Introduction to Percolation Theory 2nd edn (Taylor & Francis, 1992).
Sotta, P. & Long, D. The crossover from 2D to 3D percolation: theory and numerical simulations. Eur. Phys. J. E 11, 375–388 (2003).
Clerc, J. P., Giraud, G., Alexander, S. & Guyon, E. Conductivity of a mixture of conducting and insulating grains: dimensionality effects. Phys. Rev. B 22, 2489–2494 (1980).
Lopes, P. P. et al. Relationships between atomic level surface structure and stability. ACS Catal. 6, 2536–2544 (2016).
Liu, Y. et al. Stability limits and defect dynamics in Ag nanoparticles probed by Bragg coherent diffractive imaging. Nano Lett. 17, 1595–1601 (2017).
Gaskell, G. R. Introduction to the Thermodynamics of Materials 4th edn (Taylor & Francis, 2003).
Reynolds, P. J., Stanley, H. E. & Klein, W. Large-cell Monte Carlo renormalization group for percolation. Phys. Rev. B 21, 1223–1245 (1980).
May, T. W. & Wiedmeyer, R. H. A table of polyatomic interferences in ICP-MS. At. Spectrosc. 19, 150–155 (1998).
K.S., A.A. and Y.X. acknowledge funding from the National Science Foundation under award DMR-1708459. M.L.T. and K.S. acknowledge funding in part from the Office of Naval Research, Multidisciplinary University Research Initiative programme under award N00014-20-1-2368. D.M.A. and R.C.N. were funded by NSERC (Canada) and UNENE, the University Network of Excellence in Nuclear Engineering. P.P.L. acknowledges support by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division.
The authors declare no competing interests.
Peer review information Nature Materials thanks Sannakaisa Virtanen, David Williams and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Xie, Y., Artymowicz, D.M., Lopes, P.P. et al. A percolation theory for designing corrosion-resistant alloys. Nat. Mater. 20, 789–793 (2021). https://doi.org/10.1038/s41563-021-00920-9
This article is cited by
Nature Materials (2022)