Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals

Nature Materials volume 18, pages 1207–1214 (2019)Cite this article

Subjects

Abstract

Strengthening of metals through nanoscale grain boundaries and coherent twin boundaries is manifested by a maximum strength—a phenomenon known as Hall–Petch breakdown. Different softening mechanisms are considered to occur for nanocrystalline and nanotwinned materials. Here, we report nanocrystalline-nanotwinned Ag materials that exhibit two strength transitions dissimilar from the above mechanisms. Atomistic simulations show three distinct strength regions as twin spacing decreases, delineated by positive Hall–Petch strengthening to grain-boundary-dictated (near-zero Hall–Petch slope) mechanisms and to softening (negative Hall–Petch slope) induced by twin-boundary defects. An ideal maximum strength is reached for a range of twin spacings below 7 nm. We synthesized nanocrystalline-nanotwinned Ag with hardness 3.05 GPa—42% higher than the current record, by segregating trace concentrations of Cu impurity (<1.0 weight (wt)%). The microalloy retains excellent electrical conductivity and remains stable up to 653 K; 215 K better than for pure nanotwinned Ag. This breaks the existing trade-off between strength and electrical conductivity, and demonstrates the potential for creating interface-dominated materials with unprecedented mechanical and physical properties.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Rent or buy this article

Get just this article for as long as you need it

$39.95

Learn more

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Hall–Petch strength transition zones in pure and impurity-segregated nanotwinned Ag metals containing either perfect or kinked TBs obtained by large-scale atomistic simulations.
Fig. 2: Twin-boundary defect-motion softening mechanism (negative Hall–Petch slope).
Fig. 3: Transition from positive Hall–Petch strengthening to GB stress-controlled (near-zero Hall–Petch slope) mechanisms.
Fig. 4: Cu-impurity-mixed nanocrystalline-nanotwinned Ag (NNT-Ag) synthesized by magnetron sputtering.
Fig. 5: Electrical conductivity and yield strength of Cu-impurity-mixed NNT-Ag.

Data availability

All data needed to evaluate the conclusions in the paper are present in the paper or the Supplementary Materials.

References

  1. Chokshi, A. H., Rosen, A., Karch, J. & Gleiter, H. On the validity of the Hall–Petch relationship in nanocrystalline materials. Scr. Metall. 23, 1679–1683 (1989).

    Article  CAS  Google Scholar 

  2. Schiotz, J., Di Tolla, F. D. & Jacobsen, K. W. Softening of nanocrystalline metals at very small grain sizes. Nature 391, 561–563 (1998).

    Article  Google Scholar 

  3. Schiotz, J. & Jacobsen, K. W. A maximum in the strength of nanocrystalline copper. Science 301, 1357–1359 (2003).

    Article  CAS  Google Scholar 

  4. Szlufarska, I., Nakano, A. & Vashishta, P. A crossover in the mechanical response of nanocrystalline ceramics. Science 309, 911–914 (2005).

    Article  CAS  Google Scholar 

  5. Lu, L., Chen, X., Huang, X. & Lu, K. Revealing the maximum strength in nanotwinned copper. Science 323, 607–610 (2009).

    Article  CAS  Google Scholar 

  6. Li, X. Y., Wei, Y. J., Lu, L., Lu, K. & Gao, H. J. Dislocation nucleation governed softening and maximum strength in nano-twinned metals. Nature 464, 877–880 (2010).

    Article  CAS  Google Scholar 

  7. Stukowski, A., Albe, K. & Farkas, D. Nanotwinned FCC metals: strengthening versus softening mechanisms. Phys. Rev. B. 82, 224103 (2010).

    Article  CAS  Google Scholar 

  8. Wu, Z. X., Zhang, Y. W. & Srolovitz, D. J. Deformation mechanisms, length scales and optimizing the mechanical properties of nanotwinned metals. Acta Mater. 59, 6890–6900 (2011).

    Article  CAS  Google Scholar 

  9. You, Z. S. et al. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals. Acta Mater. 61, 217–227 (2013).

    Article  CAS  Google Scholar 

  10. Lu, N., Du, K., Lu, L. & Ye, H. Q. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper. Nat. Commun. 6, 7648 (2015).

    Article  CAS  Google Scholar 

  11. Sim, G.-D. et al. Nanotwinned metal MEMS films with unprecedented strength and stability. Sci. Adv. 3, e1700685 (2017).

    Article  CAS  Google Scholar 

  12. Hu, J., Shi, Y. N., Sauvage, X., Sha, G. & Lu, K. Grain boundary stability governs hardening and softening in extremely fine nanograined metals. Science 355, 1292–1296 (2017).

    Article  CAS  Google Scholar 

  13. Zhang, X. P. et al. Nanocrystalline copper films are never flat. Science 357, 397–399 (2017).

    Article  CAS  Google Scholar 

  14. Bufford, D., Wang, H. & Zhang, X. Thermal stability of twins and strengthening mechanisms in differently oriented epitaxial nanotwinned Ag films. J. Mater. Res. 28, 1729–1739 (2013).

    Article  CAS  Google Scholar 

  15. Wang, Y. M. et al. Defective twin boundaries in nanotwinned metals. Nat. Mater. 12, 697–702 (2013).

    Article  CAS  Google Scholar 

  16. J. P. Hirth & J. Lothe Theory of Dislocations 2nd edn (Wiley, 1982).

  17. Bufford, D., Wang, H. & Zhang, X. High strength, epitaxial nanotwinned Ag films. Acta Mater. 59, 93–101 (2011).

    Article  CAS  Google Scholar 

  18. Ott, R. T. et al. Optimization of strength and ductility in nanotwinned ultra-fine grained Ag: twin density and grain orientations. Acta Mater. 96, 378–389 (2015).

    Article  CAS  Google Scholar 

  19. Li, Q. et al. High-strength nanotwinned Al alloys with 9R phase. Adv. Mater. 30, 1704629 (2018).

    Article  CAS  Google Scholar 

  20. Ke, X. & Sansoz, F. Segregation-affected yielding and stability in nanotwinned silver by microalloying. Phys. Rev. Mater. 1, 063604 (2017).

    Article  Google Scholar 

  21. Vo, N. Q. et al. Reaching theoretical strengths in nanocrystalline Cu by grain boundary doping. Scr. Mater. 65, 660–663 (2011).

    Article  CAS  Google Scholar 

  22. Li, A. & Szlufarska, I. Morphology and mechanical properties of nanocrystalline Cu/Ag alloy. J. Mater. Sci. 52, 4555–4567 (2017).

    Article  CAS  Google Scholar 

  23. Rupert, T. J., Trenkle, J. C. & Schuh, C. A. Enhanced solid solution effects on the strength of nanocrystalline alloys. Acta Mater. 59, 1619–1631 (2011).

    Article  CAS  Google Scholar 

  24. Schuh, C. A., Nieh, T. G. & Iwasaki, H. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni. Acta Mater. 51, 431–443 (2003).

    Article  CAS  Google Scholar 

  25. Yang, X. S. et al. Time-, stress-, and temperature-dependent deformation in nanostructured copper: creep tests and simulations. J. Mech. Phys. Solids 94, 191–206 (2016).

    Article  CAS  Google Scholar 

  26. Furnish, T. A. & Hodge, A. M. On the mechanical performance and deformation of nanotwinned Ag. APL Materials 2, 046112 (2014).

    Article  CAS  Google Scholar 

  27. Pharr, G. M. & Oliver, W. C. Nanoindentation of silver-relations between hardness and dislocation structure. J. Mater. Res. 4, 94–101 (2011).

    Article  Google Scholar 

  28. Tian, Y. J. et al. Ultrahard nanotwinned cubic boron nitride. Nature 493, 385–388 (2013).

    Article  CAS  Google Scholar 

  29. Shikin, A. M. & Adamchuk, V. K. Quantum confinement effects in thin metal layers on the surface of single crystals and their analysis. Phy. Solid State 50, 1170–1185 (2008).

    Article  CAS  Google Scholar 

  30. Desireddy, A. et al. Ultrastable silver nanoparticles. Nature 501, 399–402 (2013).

    Article  CAS  Google Scholar 

  31. Garnett, E. C. et al. Self-limited plasmonic welding of silver nanowire junctions. Nat. Mater. 11, 241–249 (2012).

    Article  CAS  Google Scholar 

  32. Cheng, Z., Liu, L., Xu, S., Lu, M. & Wang, X. Temperature dependence of electrical and thermal conduction in single silver nanowire. Sci. Rep. 5, 10178 (2015).

    Article  CAS  Google Scholar 

  33. Lu, L., Shen, Y. F., Chen, X. H., Qian, L. H. & Lu, K. Ultrahigh strength and high electrical conductivity in copper. Science 304, 422–426 (2004).

    Article  CAS  Google Scholar 

  34. Ogata, S., Li, J. & Yip, S. Ideal pure shear strength of aluminum and copper. Science 298, 807–811 (2002).

    Article  CAS  Google Scholar 

  35. Murashkin, M. Y., Sabirov, I., Sauvage, X. & Valiev, R. Z. Nanostructured Al and Cu alloys with superior strength and electrical conductivity. J. Mater. Sci. 51, 33–49 (2016).

    Article  CAS  Google Scholar 

  36. Lu, D. et al. Hardness, electrical conductivity and thermal stability of externally oxidized Cu-Al2O3 composite processed by SPD. J. Mater. Eng. Perform. 26, 2110–2117 (2017).

    Article  CAS  Google Scholar 

  37. Mavlyutov, A. M. et al. Effect of annealing on microhardness and electrical resistivity of nanostructured SPD aluminium. J. Alloys Compd. 698, 539–546 (2017).

    Article  CAS  Google Scholar 

  38. Darling, K. A. et al. Extreme creep resistance in a microstructurally stable nanocrystalline alloy. Nature 537, 378–381 (2016).

    Article  CAS  Google Scholar 

  39. Wang, Y. M. et al. Additively-manufactured hierarchical stainless steels with high strength and ductility. Nat. Mater. 17, 63–71 (2018).

    Article  CAS  Google Scholar 

  40. Bezares, J. et al. Indentation of nanotwinned FCC metals: implications for nanotwin stability. Acta Mater. 60, 4623–4635 (2012).

    Article  CAS  Google Scholar 

  41. Plimpton, S. Fast parallel algorithms for short-range molecular-dynamics. J. Comput. Phys. 117, 1–19 (1995).

    Article  CAS  Google Scholar 

  42. Wu, H. H. & Trinkle, D. R. Cu/Ag EAM potential optimized for heteroepitaxial diffusion from ab initio data. Comput. Mater. Sci. 47, 577–583 (2009).

    Article  CAS  Google Scholar 

  43. Stukowski, A. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool. Modell. Simul. Mater. Sci. Eng. 18, 015012 (2010).

    Article  Google Scholar 

  44. Caro, A., Farkas, D., Bringa, E. M., Gilmer, G. H. & Zepeda-Ruiz, L. A. Effects of microalloying on the mobility and mechanical response of interfaces in nanocrystalline Cu. Mater. Sci. Forum 633–634, 21–30 (2010).

    Google Scholar 

  45. Sadigh, B. et al. Scalable parallel Monte Carlo algorithm for atomistic simulations of precipitation in alloys. Phys. Rev. B. 85, 184203 (2012).

    Article  CAS  Google Scholar 

  46. Kresse, G. & Furthmüller, J. Software VASP, Vienna (1999). Phys. Rev. B. 54, 169 (1996).

    Article  Google Scholar 

  47. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).

    CAS  Google Scholar 

Download references

Acknowledgements

The authors thank A. Engwall for help with synthesis and E. Martinez for the helpful discussion. X.K., Z.P. and F.S. are grateful for the support from the US Department of Energy (DOE) (grant no. DE-SC0016270). The work at the Lawrence Livermore National Laboratory was performed under the auspices of DOE contract no. DE-AC52-07NA27344. J.G., M.F.B. and R.T.O. at the Ames Laboratory were supported by the DOE Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under contract no. DE-AC02-07CH11358. A.C. at the Los Alamos National Laboratory is under DOE contract no. DE-AC52-06NA253. Y.M.W. and D.Q. acknowledge the support of the Laboratory Directed Research and Development (LDRD) programme (grant no. 17-ERD-048) at Lawrence Livermore National Laboratory. J.M. acknowledges support from the National Science Foundation (grant no. DMR-1611342). The simulations in this research used resources of the National Energy Research Scientific Computing Centre, supported by DOE contract no. DE-AC02-05CH11231, and those of the Extreme Science and Engineering Discovery Environment, supported by National Science Foundation (grant no. ACI-1548562).

Author information

Author notes

  1. These authors have contributed equally: Xing Ke, Jianchao Ye.

Authors and Affiliations

  1. Materials Science Program, The University of Vermont, Burlington, VT, USA

    Xing Ke & Frederic Sansoz

  2. Materials Science Division, Lawrence Livermore National Laboratory, Livermore, CA, USA

    Jianchao Ye, Dongxia Qu & Y. Morris Wang

  3. Department of Mechanical Engineering, The University of Vermont, Burlington, VT, USA

    Zhiliang Pan & Frederic Sansoz

  4. Division of Materials Sciences and Engineering, Ames Laboratory, Ames, IA, USA

    Jie Geng, Matt F. Besser & Ryan T. Ott

  5. Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM, USA

    Alfredo Caro

  6. Department of Materials Science and Engineering, University of California Los Angeles, Los Angeles, CA, USA

    Jaime Marian

Authors
  1. Xing Ke
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jianchao Ye
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhiliang Pan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jie Geng
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Matt F. Besser
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Dongxia Qu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Alfredo Caro
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Jaime Marian
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Ryan T. Ott
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Y. Morris Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Frederic Sansoz
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Y.M.W. and F.S. conceived and guided the research. J.Y., M.F.B., J.G., R.T.O. and Y.M.W. performed the synthesis, mechanical testing and characterizations. D.Q. performed the electrical measurements. A.C. developed the initial MC/MD code. X.K. and F.S. performed the MC/MD simulations and atomistic analysis. Z.P. performed the density-functional theory calculations and MD analysis on Cu metals. J.M. and F.S. developed the continuum softening model. All authors contributed to the data discussion and manuscript preparation.

Corresponding authors

Correspondence to Y. Morris Wang or Frederic Sansoz.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Discussion 1–4, Figs. 1–16, Tables 1–4 and Refs. 1–15.

Supplementary Video 1

Deformation mechanisms of Cu-segregated NC-Ag with no TB. a, Stress versus strain curve of the model during tension up to 10% strain. b, Atomic snapshot of microstructure with atomic strain coloured with scale bar from 0 to 0.5. Atoms in perfect FCC arrangement have been omitted for clarity. c, Dislocation-extraction analysis of the structure. Blue for perfect 1/2<110> dislocations, green for 1/6<112> Shockley dislocations, pink for 1/6<110> stair-rod dislocations, yellow for 1/3<001> Hirth dislocations, cyan for 1/3<111> Frank dislocations and red for other types of dislocation.

Supplementary Video 2

Deformation mechanisms of Cu-segregated nt-Ag containing kinked TBs with λ = 14.8 nm. a, Stress versus strain curve of the model during tension up to 10% strain. b, Atomic snapshot of microstructure with atomic strain coloured with scale bar from 0 to 0.5. Atoms in perfect FCC arrangement have been omitted for clarity. c, Dislocation-extraction analysis of the structure. Blue for perfect 1/2<110> dislocations, green for 1/6<112> Shockley dislocations, pink for 1/6<110> stair-rod dislocations, yellow for 1/3<001> Hirth dislocations, cyan for 1/3<111> Frank dislocations and red for other types of dislocation.

Supplementary Video 3

Close-up view on splitting and migration of twin-boundary kink-step defects inside a single grain of Cu-segregated nt-Ag containing kinked TBs with λ = 1.4 nm.

Supplementary Video 4

Deformation mechanisms of Cu-segregated nt-Ag containing perfect TBs with λ = 3.5 nm. a, Stress–strain curve of the model during tension up to 10% strain. b, Atomic snapshot of microstructure with atomic strain coloured with scale bar from 0 to 0.5. Atoms in perfect FCC arrangement have been omitted for clarity. c, Dislocation-extraction analysis of the structure. Blue for perfect 1/2<110> dislocations, green for 1/6<112> Shockley dislocations, pink for 1/6<110> stair-rod dislocations, yellow for 1/3<001> Hirth dislocations, cyan for 1/3<111> Frank dislocations and red for other types of dislocation.

Supplementary Video 5

Close-up view on grain-boundary sliding and soft slip deformation mechanisms at a grain-boundary interface from Supplementary Video 4. The colours indicate the local von-Mises shear strain.

Rights and permissions

Reprints and Permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ke, X., Ye, J., Pan, Z. et al. Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals. Nat. Mater. 18, 1207–1214 (2019). https://doi.org/10.1038/s41563-019-0484-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-019-0484-3

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing