Abstract
The allotropy of solid molecular nitrogen is the consequence of a complex interplay between fundamental intermolecular as well as intramolecular interactions. Understanding the underlying physical mechanisms hinges on knowledge of the crystal structures of these molecular phases. That is especially true for ζ-N2, key to shed light on nitrogen’s polymerization. Here, we perform single-crystal X-ray diffraction on laser-heated N2 samples at 54, 63, 70 and 86 GPa and solve and refine the hitherto unknown structure of ζ-N2. In its monoclinic unit cell (space group C2/c), 16 N2 molecules are arranged in a configuration similar to that of ε-N2. The structure model provides an explanation for the previously identified Raman and infrared lattice and vibrational modes of ζ-N2. Density functional theory calculations give an insight into the gradual delocalization of electronic density from intramolecular bonds to intermolecular space and suggest a possible pathway towards nitrogen’s polymerization.
Similar content being viewed by others
Introduction
Improving our understanding of simple diatomic molecular solids under high pressure is one of the fundamental tasks of condensed matter physics, with experimental data being widely used as benchmark tests for modern theories of the solid state. Often considered an archetypal molecular system, solid molecular nitrogen is comprised of N2 molecules that exhibit the strongest homoatomic covalent bond, the shortest bond length1 and a significant electric quadrupole moment2, with molecules solely interacting with one another through van der Waals interactions. This appearance of simplicity is shattered as density is increased and van der Waals interactions compete with one another as well as with packing efficiency. This gives rise to a surprisingly complex phase diagram, so far composed of 12 molecular phases3, three polymeric phases4,5,6,7 and one amorphous8. Of particular interest, onwards from ~80 GPa at ambient temperature8, ζ-N2 is thought to undergo a progressive polymerization with a redistribution of its electronic density from intramolecular to intermolecular spaces, as deduced from the onset of the redshift of its N2 stretching mode8. This pressure-induced continuous change ultimately leads to the formation of an amorphous polymeric phase mainly composed of single-bonded nitrogen atoms8,9,10. This gradual process is of the utmost interest as it appears to be unique to molecular nitrogen: a pressure-induced polymerization does not occur in other homoatomic systems, while in CO11, CO212,13,14, C2H215, and C2H416 the transformation is abrupt. A full understanding of this curious chemico-physical behavior of elemental nitrogen remains to be clarified as the crystal structure of ζ-N2, phase stable between 60 to 110 GPa, remains unknown.
The formation of ζ-N2 from ε-N2 around 60 GPa was discovered based on the appearance of new diffraction lines as well as Raman and infrared modes17,18,19,20,21,22,23,24,25,26. The signal of ε-N2 observed with all three of these characterization methods is nonetheless preserved through this phase transition. This suggests an intimate structural relationship between the two phases, with ζ-N2 being of lower symmetry than ε-N2. Several attempts were done to obtain a structure model of ζ-N218,19. On the basis of powder X-ray diffraction (pXRD), an orthorhombic unit cell (space group P2221, #17) was suggested, with two crystallographically unique atoms per unit cell, both on the 4e Wyckoff site. This model was later categorically ruled out as it implied a relatively large decrease in volume per N2 molecule between ε-N2 and ζ-N2—conflicting with the observed continuity of the position of X-ray diffraction lines and Raman modes at the phase transition pressure—as well as incompatibilities of the structure model with the measured vibrational modes of ζ-N217. Indeed, very detailed spectroscopic studies at various temperatures found that ζ-N2 should have at least fifteen Raman modes and three IR modes, respectively with five and two stretching modes8,22,23. Another orthorhombic unit cell was later proposed, but without insight into the nitrogen atoms’ positions18. Theoretical calculations were performed to shed light on this problematic, but concluded that the shallow energy landscape of molecular nitrogen precluded one candidate structure from standing out25.
In this study, single-crystal X-ray diffraction measurements on a laser-heated sample of molecular nitrogen were performed and the structure of ζ-N2 was solved and refined at 63, 70 and 86 GPa. ζ-N2 is found to have a monoclinic unit cell and an atomic arrangement close to that of ε-N2, mainly differing in the N2 molecules’ orientations. The obtained structure provides an explanation for all previous spectroscopic observations. Density functional theory (DFT) calculations show the dynamical stability of the refined structure, in qualitative agreement with the experimental Raman spectrum and, in particular, reproduce the number of Raman active modes. Furthermore, our calculations shed light on the progressive pressure-induced delocalization of the electronic density in ζ-N2. A clear electronic density shift from intramolecular to intermolecular space was observed in DFT-based calculations, which can be interpreted as a precursor to the formation of single-bonded amorphous nitrogen.
Results and discussion
Four screw-type BX90 diamond anvil cells (DACs)27 were loaded with different laser light absorbers and molecular nitrogen, as described in full detail in the Methods section. The samples were compressed to pressures of 54 GPa (DAC1), 63 GPa (DAC2), 70 GPa (DAC3) and 86 GPa (DAC4), and heated to a maximum temperature of 2600(200) K, 3400(200) K, 2500(200) K and to an estimate temperature of 3000 K, respectively. The reaction products of molecular nitrogen with the laser absorbers are described elsewhere28,29. In all samples, molecular nitrogen surrounding the laser absorbers was also heated, albeit likely to a lower temperature, producing multiple tiny ( < 500 nm) high-quality single-crystals on which Raman spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction (SCXRD) data were collected.
The single-crystal data collected at 54 GPa enabled to identify the expected ε-N2 phase. Its refined lattice parameters, unit cell volume and atomic position all match those found in the literature18,30 (Supplementary Table 1, Fig. 1 a and Supplementary Fig. 1). From the pXRD and Raman spectroscopy data collected at 63, 70, and 86 GPa, the recrystallized molecular nitrogen was instead identified as ζ-N2 by comparing the position of the measured diffraction lines and Raman modes to those found in the literature (Fig. 1 and Supplementary Fig. 2)8,18. The pXRD pattern of the ζ-N2 allotrope is similar to that of ε-N218, albeit with additional diffraction lines. The two high-temperature allotropes of molecular nitrogen, ι- and θ-N220, were not detected either by pXRD, SCXRD or Raman spectroscopy. These phases have already been established to be kinetically stabilized and their formation is dependent on the followed pressure–temperature path20,31,32.
From the analysis of the SCXRD data at 63, 70, and 86 GPa (see Supplementary Table 2, 3, and 4), the structure of ζ-N2 was determined to have a monoclinic unit cell (space group C2/c, #15). Supplementary Fig. 3, Supplementary Fig. 4 and Supplementary Fig. 5 show slices of the reciprocal space of the ζ-N2 single-crystals, shown to respect the extinction conditions corresponding to the chosen space group. The lattice parameters at 63 GPa are of a = 7.580(5) Å, b = 6.635(6) Å, c = 5.018(2) Å, and β = 97.64(4)° (V = 250.2(3) Å3). Four nitrogen atoms were found to be crystallographically distinct and occupy the 8f Wyckoff position, producing a total of 16 nitrogen molecules per unit cell. Three of these molecules are unique, formed by the pairs of atoms N1-N1, N3-N3, and N2-N4, featuring intramolecular distances of 1.051(6) Å, 1.016(7) Å, and 1.067(8) Å at 63 GPa, respectively, with an average value of 1.050(7) Å. This bond length value is close to the expected ~1.10 Å for triple-bonded molecular nitrogen30.
The structure of ζ-N2 is shown in Fig. 2 and Supplementary Fig. 6. When the molecules are linked together through their centers of mass, ζ-N2 can be presented as an arrangement of chains of apexes-sharing and slightly distorted triangular bipyramids aligned along the [25 0 −12] direction (Fig. 2 a). The N1-N1 molecules are at the apexes of the bipyramids, while one N3-N3 and two N2-N4 molecules are at the corners of the isosceles triangular base. The three basal molecules have their centers of mass at distances of 2.719(2), 2.719(2) and 2.750(1) Å from one another, while contacts to the apexes are of 2.834(1), 2.866(1) and 2.932(2) Å. When visualized along the [25 0 −12] direction (Fig. 2 b), the structure of ζ-N2 can be easily compared with that of ε-N2 (Fig. 2 e). In the latter, the N1-N1 molecules (blue spheres) are all aligned along its c direction, whereas in the former, only the centers of mass of the N1-N1 molecules appear on the same line, so that the molecules are tilted, and one sees two blue spheres in the projection along the [25 0 -12] direction. If the structure of ζ-N2 is viewed along its c (Fig. 2 c) and [−251 −195 21] directions (Fig. 2 d), one can see that the N4-N4 and N2-N3 molecules are displaced with respect to each other, if compared with the N2-N2 molecules of ε-N2, which superimpose in the similar projection (Fig. 2 f). These tiny deviations in the structure of ζ-N2 lead to a symmetry reduction from R-3c (#167) in ε-N2 to C2/c (#15) in ζ-N2.
The space group C2/c being a subgroup of R-3c, the correspondence in atomic positions between ζ-N2 and ε-N2 is straightforward to determine. The N1 position in ε-N2 (12c Wyckoff site, blue spheres in Fig. 2e, f) directly matches the N1 position in ζ-N2 (blue sphere in Fig. 2a–d), and the N2 position in ε-N2 (36f Wyckoff site, red spheres in Fig. 2e, f) splits into the N2, N3 and N4 positions in ζ-N2 (atoms drawn in pink, orange and green, respectively, in Fig. 2a–d). This consideration is inline with the suggestion that the ε → ζ transformation occurs through a displacive phase transition, reported previously based on the lack of a discontinuity in the evolution of the diffraction lines17,18,19 and vibrons20,21,22,23,24 of molecular nitrogen through the transition pressure. It is worth noting that previous work33 had predicted a structure for ζ-N2—based on group-subgroup related structures obtained through slight distortions of the cubic δ-N2 parent structure—that is remarkably similar to the one here determined.
Having determined the correct unit cell of ζ-N2, the absence of a discontinuity in the volume per N2 molecule with pressure can also be verified. Shown in Fig. 3 is the volume per N2 molecule at 63, 70, and 86 GPa obtained from single-crystal data. Figure 3 includes additional points at pressures of 80, 86, 90, 99, and 110 GPa, obtained from re-analyzing raw powder X-ray diffraction data from Gregoryanz et al18 using Le Bail refinement to determine the unit cell parameters of ζ-N2 (Supplementary Fig. 7 and Supplementary Fig. 8). Using the EoSFIT software34, a second order Birch-Murnaghan equation of state (BM2-EOS) was used to fit the pressure-volume datapoints of ε-N2 (V0 = 29.3(5) Å3; K0 = 30(2) GPa), and another BM2-EOS to fit the combined points of ε-N2 and ζ-N2 (V0 = 29.2(3) Å3; K0 = 30(1) GPa). Remarkably, the two curves are, within uncertainty, identical to one another. This perfect agreement unambiguously demonstrates the lack of a volume discontinuity between the ε- and ζ-N2 phases.
DFT calculations performed on ζ-N2 led to a relaxed structure which reproduces well the experimental models at 63, 70 and 86 GPa (Supplementary Tables 2, 3, and 4). The structure was found dynamically stable with its computed phonon density of states featuring no imaginary modes at 70 GPa (Supplementary Fig. 9). Calculations with the HSE functional find ζ-N2 to have a wide bandgap of 5.3 eV at 70 GPa. The calculated band structure (Supplementary Fig. 10) predicts an indirect bandgap. The projection of the electronic density of states to the atomic orbitals (Supplementary Fig. 11) reveal that N2 and N4, despite forming one molecule, have a slightly different contribution to the total DOS, which is in agreement with both atoms having distinct chemical environments. The static enthalpy of ζ-N2 was also computed and compared to that of ε-N2 (Supplementary Fig. 12) in the pressure interval from 16 to 115 GPa. The former shows a lower static enthalpy than the latter at all pressures (ΔH < 15 meV/atom). Extrapolating the static enthalpy calculations leads to a transition at ~10 GPa. This is in qualitative agreement with experimental measurements at low temperature which show a ε-N2 → ζ-N2 transformation between ~ 10 and ~25 GPa at 30 K22 (see Supplementary Information for details).
Previously, the most compelling evidence for ζ-N2 came from infrared (IR) and Raman spectroscopy measurements20,21,22,23,24. In the frequency range corresponding to the N2 molecules’ vibrons, the three most recent studies8,22,23 agreed to five and two modes detectable from Raman and IR measurements, respectively, while ten lattice modes were observed from Raman measurements22 and one from IR studies8. The number of Raman modes previously reported is in agreement with the experimental data presented here for ζ-N2 at 70 GPa (Supplementary Fig. 2).
It stands to reason that the structure model proposed for ζ-N2 needs to account for the modes found by Raman and IR measurements. Based on group theory, the structure of ζ-N2 can have a total of 24 Raman-active modes (Γ = 12Ag + 12Bg) and 21 IR-active modes (Γ = 11Au + 10Bu)—so far in agreement with previous experimental evidences. To provide a more quantitative analysis, the intensity and frequency of the IR- and Raman-active modes corresponding to the structure of ζ-N2 were calculated using DFT at 70 GPa (Supplementary Table 5). Excluding acoustic modes, 24 Raman modes were obtained: five vibron modes and 19 lattice modes. The number of vibron modes is in perfect correspondence with the experimental data, while more lattice modes are predicted than reported from measurements. However, as seen in Supplementary Table 5, most of the lattice modes are, compared to the vibrons, calculated to have a much lower intensity and to be quite close to one another in frequency—perfectly compatible with the low intensity and broad peaks detected from experiments20,22,23 and the data in Supplementary Fig. 2. The same reasoning applies to IR modes (Supplementary Table 5), for which the 21 (three vibrons, 18 lattice modes) predicted by calculations are all found to be of very low intensity and often close in frequency. It is worth underlining that while the calculated Raman frequency of the lattice modes reproduces very well the experimental data, the agreement appears not to be as good for the vibron modes (Supplementary Fig. 2). However, these frequency differences for the vibron modes are only of between 0.2 and 1%—values which are in fact quite reasonable and in line with what can be expected from theoretical calculations of such systems35,36,37,38,39,40.
The unambiguous structure solution of ζ-N2 obtained in this work, in combination with DFT calculations, allows us to provide a qualitative analysis of the gradual pressure-induced electronic density delocalization in molecular nitrogen and thus shed light on the unique attribute of nitrogen—its progressive molecular-to-polymeric phase transition. As the structure of κ-N2, reported to form above 115 GPa18, is still unknown, DFT calculations were performed using the structure of ζ-N218 up to 200 GPa. Since κ-N2 is expected to be structurally very similar to ζ-N218, this allows for a qualitatively sound analysis.
The integrated crystal orbital bond index (ICOBI)41—a direct measure of the bond order—was computed between 20 and 200 GPa (Fig. 4 a), for both intramolecular and intermolecular nitrogen contacts. Interestingly, the intramolecular ICOBI decreases almost linearly with pressure, beginning at 20 GPa in the ε-N2 phase, concomitantly with an ICOBI increase between N2 units (Fig. 4 a). The intramolecular bond with the lowest ICOBI value is that of the N1-N1 molecule (Fig. 4 a): precisely the one for which the vibron peak begins to redshift at 80 GPa8,24. The intramolecular ICOBI at 200 GPa are between 2.0 and 2.4, while the ICOBI corresponding to the intermolecular regions is substantially higher for four pairs of atoms: ~0.230 (N1-N4), ~0.190 (N2-N3), ~0.148 (N1-N3) and ~0.144 (N1-N2), respectively at distances of 1.83, 1.85 and 1.89 Å from one another. Again, one can note the electronic dissimilarities between the atoms of the N2-N4 molecule. The slope of the intramolecular ICOBI with respect to pressure changes for all three distinct molecules between 90 and 110 GPa (Supplementary Fig. 13); which denotes the acceleration of the intra-to-intermolecular electronic delocalization at higher pressures.
To better understand the redistribution of electronic density, the electron localization function (ELF) of ζ-N2 was calculated at pressures between 110 to 150 GPa. From the ELF computations (Fig. 4b), isosurfaces of 0.5—value defined as that of a free electron gas42—were drawn for structures in this pressure range. At 130 GPa, ELF isosurfaces start to connect in the intermolecular space between the N1 and N4 atoms (1.96 Å apart), each, respectively, part of the N1-N1 and N2-N4 molecules, altogether forming three-molecule-long units (i.e. two N1-N1 and one N2-N4). This N1 to N4 intermolecular region is the one with the highest calculated ICOBI value. At a pressure of 150 GPa, this ELF bridge extends to the N3-N3 molecule, as seen in Fig. 4b), with the N1 atom then forming three contacts with ELF values greater than 0.5. This results in a 1D percolation of ELF-linked molecules in ζ-N2 which, when visualized along the c-axis, shows structural similarities to cg-N (Supplementary Fig. 14). This network could act as a seed for nitrogen’s polymerization, thus providing a tentative path for this unique transformation. Given the mild volume underestimation of theoretical calculations compared to the experimentally measured volumes—and not accounting for the κ-N2 phase—the pressure at which this phenomenon occurs is likely higher. The performed static DFT calculations put on a solid footing a progressive pressure-induced polymerization and therefore establish a potential underpinning mechanism for the formation of single-bonded amorphous nitrogen. Extended molecular dynamics simulations at finite temperatures, which capture thermal effects as well as possible intermediate phases43,44 during the amorphization, would be the next step in order to study this phenomenon in more detail.
The in-situ single-crystal X-ray diffraction data allowed solving and refining the structure of ζ-N2 at 63, 70, and 86 GPa. ζ-N2 has pronounced similarities with ε-N2 having analogous arrangements of molecules but, as permitted by its lower symmetry, has subtle differences in the molecules’ orientation. This provides an explanation for the observed continuity of the X-ray diffraction lines as well as Raman and infrared modes across the ε → ζ phase transition, as well as the appearance of new signals. Moreover, the determined structure of ζ-N2 fully explains the previously collected detailed spectroscopic data with regard to the known number of lattice and vibron modes.
Theoretical calculations show a progressive intra-to-intermolecular electronic delocalization occurring in molecular nitrogen, also identifying a mild acceleration of this phenomenon near 100 GPa. The proximity of the N2 molecules at 150 GPa—and in particular those identified by ELF to agglomerate—could act as a seed for polymerization and suggests a natural transformational mechanism towards amorphous single-bonded nitrogen. This study thus brings us one step closer to a full understanding of this deceivingly simple element under pressure.
Methods
Experimental
DAC preparation and laser-heating
Four BX90-type screw-driven diamond anvil cells (DACs)27 were equipped with 250 μm culet diamond anvils. Rhenium gaskets with an initial thickness of 200 μm were indented down to ~25 μm and a hole of ~120 μm in diameter was laser-drilled at the center of the indentations. The four DACs were loaded with YAG laser light absorbers, namely potassium azide (KN3, Sigma Aldrich, 99.9% purity) in DAC2, molecular nitrogen loaded as a gas at 1200 bars45 along with carbon tetraiodide (CI4, Sigma Aldrich 97% purity) in DAC1, tetracyaoethylene (TCNE, C6N4, Alfa Aesar, 98% purity) in DAC3, and a boron-doped carbon disk in DAC4. The in-situ pressure was determined using the equation of state of rhenium46 and verified using the first-order Raman mode of the stressed diamond anvils47. Double-sided sample laser heating was performed at the Bayerisches Geoinstitut48 and at the P02.2 beamline. Temperatures were measured with an accuracy of ±200 K, using the thermoemission produced by the laser-heated samples48.
Synchrotron X-ray diffraction
Synchrotron X-ray diffraction measurements of the compressed samples were performed at the P02.2 beamline (λ = 0.2890 Å or λ = 0.2910 Å) of PETRA III, at the ID11 beamline (λ = 0.2846 Å) of the ESRF and at the GSECARS beamline (λ = 0.2950 Å) of the APS. In order to determine the position where the single-crystal X-ray diffraction (SCXRD) data would be collected, the sample cavity was fully mapped by X-ray diffraction. The sample positions displaying the most and the strongest single-crystal reflections belonging to ζ-N2 were chosen for the acquisition of single-crystal data in step-scans of 0.5° from −38° to +38°, resulting in 152 diffraction images per dataset.
The CrysAlisPro software49 was utilized for the analysis of the single crystal data. Previously to the single-crystal data acquisitions on ζ-N2, data had been collected on a single-crystal standard in order to obtain in CrysAlisPro the calibrated diffractometer’s model. For this, a standard orthoenstatite single-crystal loaded in a DAC, (Mg1.93Fe0.06)(Si1.93,Al0.07)O6, space group Pbca with lattice parameter a = 8.8117(2) Å, b = 5.18320(10) Å, and c = 18.2391(3) Å, was employed.
Once the calibration has been done, the first step of the data analysis consists of converting the 152 diffraction images constituting a dataset to the ESPERANTO format—i.e. the format used by CrysAlisPro. Then, the peak hunting command (3D peak search option) of CrysAlisPro is used, which searches through all 152 diffraction images to find diffraction spots. The position of these diffraction spots in the reciprocal space is saved to a .tabbin file, which is given to the DAFi software50. This software searches through these reflections and identifies groups of reflections belonging to individual single-crystal domains. The output of DAFi is provided back to CrysAlisPro, in which the Auto unit cell finding in the shown peaks command is ran to determine the unit cell and orientation matrix of all single-crystals for which groups of reflections were found by DAFi.
Having established the crystal’s unit cell, the reflections’ intensity need to be extracted to later be used to determine the atomic species and position. This is done through CrysAlisPro’s data reduction (or integration) procedure. In essence, CrysAlisPro goes again through all 152 diffraction images and, using user-provided parameters such as the opening angle of the DAC, background evaluation mode, integration box size, reflection profile fitting mode as well as the known unit cell parameters and orientation matrix, the intensity of each reflection of a given single-crystal is obtained. CrysAlisPro also applies frame scaling and absorption corrections. Systematic absences are analysed and a space group suggested. After the data integration is process, an Rint value (see Supplementary Table 1, 2, 3, and 4) is provided, which is a figure of merit of the integration. Rint values below 10% are considered as good and likely to be sufficient to obtain a structure model.
The hkl file, a standard format listing the observed reflections by their hkl index and intensity, is produced by CrysAlisPro at the end of the integration process. Normal structure solving and refinement softwares can be employed using this file. In our case, the JANA2006 software51 was used, along with the SHELXT and SHELXL softwares52 for structure solving and refinement, respectively. Reflections overlapping with parasitic signal, either from the diamond anvils or distinct single-crystals, were omitted from the refinement. This single-crystal X-ray diffraction approach for polycrystalline samples was successfully employed by other independent research groups47,48,49.
Powder X-ray diffraction measurements were also performed and the obtained data was integrated with the Dioptas software53 and Le Bail refinements completed using FullProf54.
Raman spectroscopy
Confocal Raman spectroscopy measurements were performed at the Centre for Science at Extreme Conditions (CSEC). The measurements were conducted using 532 nm excitation wavelength via a custom-built micro-focused Raman system equipped with a 20x Mitutoyo objective, a spectrometer with 1800 lines/mm grating and a CCD array detector. A laser output power of 63 mW was used.
Computational details
Kohn-Sham density functional theory (DFT) based calculations were performed with the Quantum Espresso package55,56,57 using the projector augmented wave method58. We used the generalized gradient approximation by Perdew-Burke-Ernzerhof (PBE) for exchange and correlation59 with a projector augmented wave potential file, where the 1 s electrons are treated as scalar-relativistic core state. We include van der Waals corrections following the approach by Grimme et al. as implemented in Quantum Espresso60. Convergence tests with a threshold of 1 meV per atom in energy and 0.1 meV/Å per atom for forces led to a Monkhorst-Pack61 k-point grid of 6x7x9 for the conventional cell and an energy cutoff for the plane wave expansion of 80 Ry. We performed variable cell relaxations (lattice parameters and atomic positions) on the experimental structures to optimize the atomic coordinates and the cell vectors until the total forces were smaller than 10-4 eV/Å per atom and the deviation from the experimental pressure was below 0.1 GPa.
Phonon calculations
Harmonic phonons were calculated with Phonopy62 in 432 atom supercells with adjusted k-points. The position of the phonon modes at the Γ-point and Raman activities were furthermore calculated using ph.x within the Quantum Espresso package using Optimized Norm-Conserving Vanderbilt (ONCV) potentials63 with an adjusted cutoff of 120 Ry. Frequencies are in very good agreement between the two calculation methods.
Electronic structure calculations
Electronic structure calculations are performed with a higher k-point resolution of 12x14x18. The same parameters are used to calculate electron localization functions (ELFs) as well as the crystal orbital bond index41 via the LOBSTER code64. ELFs are plotted with VESTA365.
Additional calculations for the band gap are performed with the Heyd–Scuseria–Ernzerhof (HSE) hybrid functional66 with the standard screening parameter, a k-grid of 8x8x8 and a q-grid of 4x4x4.
Data availability
Crystallographic data for the structures reported in this Article have been deposited at the Cambridge Crystallographic Data Centre, under deposition numbers CCDC 2237807-2237808, 2261391, and 2280044. Copies of the data can be obtained free of charge via https://www.ccdc.cam.ac.uk/structures/. Source data for Fig. 1 a, b; Fig. 3; Fig. 4; Supplementary Fig. 2a, b; Supplementary Fig. 7a, b, c, d, e; Supplementary Fig. 8; Supplementary Fig. 9, Supplementary Fig. 10, Supplementary Fig. 11, Supplementary Fig. 12 and Supplementary Fig. 13 are provided with this paper. The data for Fig. 4 b are provided as a zipped file containing the “cube” datatype. The Crystallographic Information Files (CIFs) for ε-N2 at 54 GPa as well as ζ-N2 at 63, 70, and 86 GPa can be found in Supplementary Data 1. Supplementary Data 2 contains the Electron Localization Functions (ELFs) of ζ-N2 at 110, 130, 140 and 150 GPa. The corresponding authors can be contacted for any requests. Source data are provided with this paper.
References
Montes, M. F. Nitrogen. in Chemistry of the Elements (eds. Greenwood, N. N. & Earnshaw, A.) 406–472 (Elsevier, 1997). https://doi.org/10.1016/B978-0-7506-3365-9.50017-1
Buckingham, A. D., Dunmur, D. A. & Disch, R. L. The quadrupole moments of some simple molecules. J. Am. Chem. Soc. 90, 3104–3107 (1968).
Turnbull, R. et al. Unusually complex phase of dense nitrogen at extreme conditions. Nat. Commun. 9, 4717 (2018).
Laniel, D., Geneste, G., Weck, G., Mezouar, M. & Loubeyre, P. Hexagonal Layered Polymeric Nitrogen Phase Synthesized near 250 GPa. Phys. Rev. Lett. 122, 066001 (2019).
Laniel, D. et al. High-pressure polymeric nitrogen allotrope with the black phosphorus structure. Phys. Rev. Lett. 124, 216001 (2020).
Eremets, M. I., Gavriliuk, A. G., Trojan, I. A., Dzivenko, D. A. & Boehler, R. Single-bonded cubic form of nitrogen. Nat. Mater. 3, 558–563 (2004).
Ji, C. et al. Nitrogen in black phosphorus structure. Sci. Adv. 6, eaba9206 (2020).
Goncharov, A. F., Gregoryanz, E., Mao, H. K., Liu, Z. & Hemley, R. J. Optical evidence for a nonmolecular phase of nitrogen above 150 GPa. Phys. Rev. Lett. 85, 1262–1265 (2000).
Eremets, M. I., Hemley, R. J., Mao, H. & Gregoryanz, E. Semiconducting non-molecular nitrogen up to 240 GPa and its low-pressure stability. Nature 411, 170–174 (2001).
Gregoryanz, E., Goncharov, A., Hemley, R. & Mao, H. High-pressure amorphous nitrogen. Phys. Rev. B 64, 052103 (2001).
Lipp, M. J., Evans, W. J., Baer, B. J. & Yoo, C.-S. High-energy-density extended CO solid. Nat. Mater. 4, 211–215 (2005).
Santoro, M. et al. Amorphous silica-like carbon dioxide. Nature 441, 857–860 (2006).
Iota, V. et al. Six-fold coordinated carbon dioxide VI. Nat. Mater. 6, 34–38 (2007).
Datchi, F., Giordano, V. M., Munsch, P. & Saitta, A. M. Structure of carbon dioxide phase IV: breakdown of the intermediate bonding state scenario. Phys. Rev. Lett. 103, 185701 (2009).
Aoki, K. et al. Solid-state polymerization of acetylene under pressure. Synth. Met. 28, 91–98 (1989).
Chelazzi, D., Ceppatelli, M., Santoro, M., Bini, R. & Schettino, V. Pressure-induced polymerization in solid ethylene. J. Phys. Chem. B 109, 21658–21663 (2005).
Gregoryanz, E. et al. On the ϵ-ζ transition of nitrogen. J. Chem. Phys. 124, 116102 (2006).
Gregoryanz, E. et al. High P-T transformations of nitrogen to 170GPa. J. Chem. Phys. 126, 184505 (2007).
Eremets, M. I. et al. Structural transformation of molecular nitrogen to a single-bonded atomic state at high pressures. J. Chem. Phys. 121, 11296 (2004).
Gregoryanz, E. et al. Raman, infrared, and x-ray evidence for new phases of nitrogen at high pressures and temperatures. Phys. Rev. B 66, 224108 (2002).
Schneider, H., Häfner, W., Wokaun, A. & Olijnyk, H. Room temperature Raman scattering studies of external and internal modes of solid nitrogen at pressures 8≤P≤54 GPa. J. Chem. Phys. 96, 8046 (1992).
Bini, R., Ulivi, L., Kreutz, J. & Jodl, H. J. High-pressure phases of solid nitrogen by Raman and infrared spectroscopy. J. Chem. Phys. 112, 8522 (2000).
Goncharov, A. F., Gregoryanz, E., Mao, H. & Hemley, R. J. Vibrational dynamics of solid molecular nitrogen to megabar pressures. Low. Temp. Phys. 27, 866–869 (2001).
Olijnyk, H. & Jephcoat, A. P. Vibrational dynamics of isotopically dilute nitrogen to 104 GPa. Phys. Rev. Lett. 83, 332–335 (1999).
Hooper, J., Hu, A., Zhang, F. & Woo, T. K. Genetic algorithm and first-principles DFT study of the high-pressure molecular ζ phase of nitrogen. Phys. Rev. B 80, 104117 (2009).
Sontising, W. & Beran, G. J. O. Combining crystal structure prediction and simulated spectroscopy in pursuit of the unknown nitrogen phase ζ crystal structure. Phys. Rev. Mater. 4, 063601 (2020).
Kantor, I. et al. BX90: A new diamond anvil cell design for X-ray diffraction and optical measurements. Rev. Sci. Instrum. 83, 125102 (2012).
Laniel, D. et al. Synthesis of ultra-incompressible carbon nitrides featuring three-dimensional frameworks of CN4 tetrahedra recoverable at ambient conditions. Preprint at https://arxiv.org/abs/2209.01968 (2022).
Laniel, D. et al. Aromatic hexazine [N6]4− anion featured in the complex structure of the high-pressure potassium nitrogen compound K9N56. Nat. Chem. 15, 641–646 (2023).
Mills, R. L., Olinger, B. & Cromer, D. T. Structures and phase diagrams of N2 and CO to 13 GPa by x-ray diffraction. J. Chem. Phys. 84, 2837 (1986).
Tomasino, D., Jenei, Z., Evans, W. & Yoo, C.-S. Melting and phase transitions of nitrogen under high pressures and temperatures. J. Chem. Phys. 140, 244510 (2014).
Goncharov, A. F., Crowhurst, J. C., Struzhkin, V. V. & Hemley, R. J. Triple point on the melting curve and polymorphism of nitrogen at high pressure. Phys. Rev. Lett. 101, 095502 (2008).
Katzke, H. & Tolédano, P. Theoretical description of pressure- and temperature-induced structural phase transition mechanisms of nitrogen. Phys. Rev. B 78, 064103 (2008).
Angel, R. J., Alvaro, M., Gonzalez-Platas, J. & Alvaro, M. EosFit7c and a Fortran module (library) for equation of state calculations. Z. Krist. 229, 405–419 (2014).
Ma, Y., Oganov, A. R. & Glass, C. W. Structure of the metallic ζ -phase of oxygen and isosymmetric nature of the ε - ζ phase transition: ab initio simulations. Phys. Rev. B 76, 064101 (2007).
Niwa, K. et al. Nitriding synthesis and structural change of phosphorus nitrides at high pressures. J. Raman Spectrosc. 52, 1064–1072 (2021).
Bhadram, V. S. et al. Semiconducting cubic titanium nitride in the Th3P4 structure. Phys. Rev. Mater. 2, 011602 (2018).
Niwa, K. et al. High pressure synthesis of marcasite-type rhodium pernitride. Inorg. Chem. 53, 697–699 (2014).
Salke, N. P. et al. Tungsten hexanitride with single-bonded armchairlike hexazine structure at high pressure. Phys. Rev. Lett. 126, 065702 (2021).
Ceppatelli, M. et al. High-pressure and high-temperature chemistry of phosphorus and nitrogen: synthesis and characterization of α- and γ-P 3 N 5. Inorg. Chem. 61, 12165–12180 (2022).
Müller, P. C., Ertural, C., Hempelmann, J. & Dronskowski, R. Crystal orbital bond index: covalent bond orders in solids. J. Phys. Chem. C 125, 7959–7970 (2021).
Savin, A., Nesper, R., Wengert, S. & Fässler, T. F. ELF: The electron localization function. Angew. Chem. Int. Ed. Engl. 36, 1808–1832 (1997).
Melicherová, D., Kohulák, O., Plašienka, D. & Martoňák, R. Structural evolution of amorphous polymeric nitrogen from ab initio molecular dynamics simulations and evolutionary search. Phys. Rev. Mater. 2, 103601 (2018).
Plašienka, D. & Martoňák, R. Transformation pathways in high-pressure solid nitrogen: From molecular N 2 to polymeric cg-N. J. Chem. Phys. 142, 094505 (2015).
Kurnosov, A. et al. A novel gas-loading system for mechanically closing of various types of diamond anvil cells. Rev. Sci. Instrum. 79, 045110 (2008).
Anzellini, S., Dewaele, A., Occelli, F., Loubeyre, P. & Mezouar, M. Equation of state of rhenium and application for ultra high pressure calibration. J. Appl. Phys. 115, 043511 (2014).
Akahama, Y. & Kawamura, H. Pressure calibration of diamond anvil Raman gauge to 410 GPa. J. Phys. Conf. Ser. 215, 012195 (2010).
Fedotenko, T. et al. Laser heating setup for diamond anvil cells for in situ synchrotron and in house high and ultra-high pressure studies. Rev. Sci. Instrum. 90, 104501 (2019).
Rigaku Oxford Diffraction. CrysAlisPro Software system (Rigaku Oxford Diffraction, 2015).
Aslandukov, A., Aslandukov, M., Dubrovinskaia, N. & Dubrovinsky, L. Domain Auto Finder (DAFi) program: the analysis of single-crystal X-ray diffraction data from polycrystalline samples. J. Appl. Crystallogr. 55, 1383–1391 (2022).
Petrícek, V., Dušek, M. & Palatinus, L. Crystallographic computing system JANA2006: General features. Z. Krist. 229, 345–352 (2014).
Sheldrick, G. M. A short history of SHELX. Acta Crystallogr. A: Found. Crystallogr. 64, 112–122 (2008).
Prescher, C. & Prakapenka, V. B. DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration. High. Press. Res. 35, 223–230 (2015).
Rodriguez-Carvajal, J. Recent advances in magnetic structure determination neutron powder diffraction. Phys. B: Condens. Matter 192, 55–69 (1993).
Giannozzi, P. et al. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter 21, 395502 (2009).
Giannozzi, P. et al. Advanced capabilities for materials modelling with Quantum ESPRESSO. J. Phys. Condens. Matter 29, 465901 (2017).
Giannozzi, P. et al. Quantum ESPRESSO toward the exascale. J. Chem. Phys. 152, 154105 (2020).
Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 132, 154104 (2010).
Monkhorst, H. J. & Pack, J. D. Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188–5192 (1976).
Togo, A. & Tanaka, I. First principles phonon calculations in materials science. Scr. Mater. 108, 1–5 (2015).
Hamann, D. R. Optimized norm-conserving Vanderbilt pseudopotentials. Phys. Rev. B 88, 085117 (2013).
Nelson, R. et al. LOBSTER: Local orbital projections, atomic charges, and chemical‐bonding analysis from projector‐augmented‐wave‐based density‐functional theory. J. Comput. Chem. 41, 1931–1940 (2020).
Momma, K. & Izumi, F. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J. Appl. Crystallogr. 44, 1272–1276 (2011).
Heyd, J., Scuseria, G. E. & Ernzerhof, M. Hybrid functionals based on a screened Coulomb potential. J. Chem. Phys. 118, 8207–8215 (2003).
Acknowledgements
The authors thank E. Gregoryanz for sharing with us his raw powder X-ray diffraction data on ζ-N2 and F. Tasnádi for helpful discussions. The authors acknowledge the Deutsches Elektronen-Synchrotron (DESY, PETRA III) and the European Synchrotron Radiation Facility (ESRF) for provision of beamtime at the P02.2 and the ID11 beamline, respectively. Portions of this work were also performed at GeoSoilEnviroCARS (The University of Chicago, Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation—Earth Sciences (EAR—1634415). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. D.L. thanks the UKRI Future Leaders Fellowship (MR/V025724/1) for financial support. N.D. and L.D. thank the Federal Ministry of Education and Research, Germany (BMBF, grant no. 05K19WC1) and the Deutsche Forschungsgemeinschaft (DFG; projects DU 954–11/1, DU 393–9/2, and DU 393–13/1) for financial support. N.D. and I.A.A. also thank the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No. 2009 00971). I.A.A. and F.T. are supported by the Knut and Alice Wallenberg Foundation (Wallenberg Scholar grant no. KAW-2018.0194). I.A.A. acknowledges support from the Swedish Research Council (VR) Grant No. 2019-05600. The computations were enabled by resources provided by the Swedish National Infrastructure for Computing (SNIC) at PDC though grant SNIC 2022/1-6 partially funded by the Swedish Research Council through grant agreement no. 2018-05973. We acknowledge the National Academic Infrastructure for Supercomputing in Sweden (NAISS) and the Swedish National Infrastructure for Computing (SNIC) partially funded by the Swedish Research Council through grant agreement no. 2022-06725 and no. 2018-05973 for awarding access to the LUMI supercomputer, owned by the EuroHPC Joint Undertaking, hosted by CSC (Finland) and the LUMI consortium, through grant SNIC 2022/13-3 & SNIC 2022/21-10. For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) licence to any Author Accepted Manuscript version arising from this submission.
Author information
Authors and Affiliations
Contributions
D.L. designed the work. D.L. prepared the high-pressure experiments. D.L., A.A., L.D., T.F., K.G., J.S., U.R., E.L.B., S.C., and V.B.P. performed the synchrotron X-ray diffraction experiments. D.L. processed the synchrotron X-ray diffraction data. D.L. collected and analyzed the Raman data. F.T., and I.A.A. performed the theoretical calculations. D.L. F.T., L.D., and N.D. contextualized the data interpretation. D.L., F.T., L.D., N.D., and I.A.A. prepared the first draft of the manuscript with contributions from all other authors. All the authors commented on successive drafts and have given approval to the final version of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Yinwei Li, Ho-Kwang Mao and the anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Laniel, D., Trybel, F., Aslandukov, A. et al. Structure determination of ζ-N2 from single-crystal X-ray diffraction and theoretical suggestion for the formation of amorphous nitrogen. Nat Commun 14, 6207 (2023). https://doi.org/10.1038/s41467-023-41968-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-41968-2
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.