Abstract
The rich physical properties of multiatomic crystals are determined, to a significant extent, by the underlying geometry and connectivity of atomic orbitals. The mixing of orbitals with distinct parity representations, such as s and p orbitals, has been shown to be useful for generating systems that require alternating phase patterns, as with the sign of couplings within a lattice. Here we show that by breaking the symmetries of such mixedorbital lattices, it is possible to generate synthetic magnetic flux threading the lattice. We use this insight to experimentally demonstrate quadrupole topological insulators in twodimensional photonic lattices, leveraging both s and p orbitaltype modes. We confirm the nontrivial quadrupole topology by observing the presence of protected zerodimensional states, which are spatially confined to the corners, and by confirming that these states sit at midgap. Our approach is also applicable to a broader range of timereversalinvariant synthetic materials that do not allow for tailored connectivity, and in which synthetic fluxes are essential.
Similar content being viewed by others
Introduction
When studying materials and their physical properties, much emphasis is put on how atoms are combined to form molecules and crystalline structures through different orbital connections. In particular, the richness of macroscopic properties in multiatomic molecules and crystalline structures is closely related to the way in which orbitals connect. For example, a water molecule has an angled shape due to the hybridization of s and p orbitals, which in turn, causes the sixfold rotational symmetry of snowflakes. Similarly, the electronic properties of monolayer 2D transition metal dichalcogenides can be deliberately tuned over a wide range, in part, due to the interplay between d orbitals on metal atoms and p_{z} orbitals on chalcogen atoms^{1,2,3}. In this context, the theory of "topological quantum chemistry”^{4} has greatly advanced the understanding of the intimate relationship between electronic orbitals and topological phases in crystalline structures and has led to the realization that topologically nontrivial materials are much more common than previously thought.
The ability of synthetic systems to replicate, and in many cases extend, the properties of chemical compounds and crystalline structures has recently become of great interest. As in real materials, the orbital degree of freedom can also be incorporated into synthetic systems by using analogous wavefunctions with distinct nodal structures. Such synthetic multiorbital systems have been demonstrated in polariton lattices^{5,6}, photonic lattices^{7,8,9,10}, and ultracold atoms in optical lattices^{11,12,13,14,15,16}, with the possibility of negative^{8,16} and even complexvalued^{10,17} coupling coefficients. These features have made synthetic platforms wellsuited to explore novel physics that typically are difficult to study in solidstate systems.
Due to their inherent robustness and potential for disorderresilient technologies, topological phases in synthetic periodic platforms are a very active area of study. Notably, the initial demonstrations of higherorder topological phases^{18} were produced using synthetic materials^{19,20,21,22,23,24,25,26,27}. A quadrupole topological insulator (QTI) is the first member of the multipole higherorder topological insulators, but is not straightforward to implement as it requires a π flux of synthetic magnetic field threading each plaquette in the lattice^{18,28}. In previous experimental realizations of QTIs^{20,21,22,23,24}, the π flux was achieved by tailored connectivities within the system^{20,21,22,23} or couplings with arbitrary phases by exploiting additional coupling links^{24}. However, these approaches are not always practical, especially in nanoscale geometries, and a good solution is needed to enable synthetic fluxes in a broader range of experimental platforms.
Here, we present a QTI in a photonic system that uses the symmetry representations of onsite orbitals to generate the necessary synthetic π fluxes. We consider s and p orbitals, which have inherent even and odd parities, respectively. We exploit the property that, as the wavefunctions of the collective system traverse a p orbital, they accumulate a phase of π^{9}. The combination and judicious control of the orbitals in a foursite unit cell [Fig. 1c], breaking the symmetries of mixedorbital lattices, creates a synthetic π flux that opens a gap at "halffilling" which, along with the modulation in the hopping amplitudes, results in the gapped system having a QTI phase. We experimentally demonstrate the photonic QTIs in a waveguide lattice fabricated using direct laser writing by showing the existence of midgap modes, which are localized at the corners of the lattice. The fabrication of the waveguides by direct laser writing allows for unprecedented control over the waveguide parameters including both the crosssections and the trajectories of the waveguides^{10,29}, which was not straightforward in the conventional femtosecond direct laser writing technique^{30}.
Results
We start by presenting the implementation of our QTI by using s and p orbitals to induce π flux threading a unit cell, taking advantage of the πphase accumulated by the wavefunction as it crosses the p orbital. A square unit cell is composed of four sites with different orbitals: two p orbitals, which have the major axes tilted from the yaxis by ± 45^{∘}, respectively, and two s orbitals as shown in Fig. 1c. We note that the coupling strength ∣γ∣ between any adjacent pair of s and p orbitals inside the unit cell is identical. However, the lobe of the p orbital that couples more strongly with the s orbital is dictated by its corresponding spatial proximity to the lobe (i.e., formally known as the overlap integral), resulting in a nonzero net coupling between the sites. It can then be seen, as in Fig. 1c, that for any wavefunction that loops around a unit cell plaquette there must be exactly one traversal of a p orbital through both lobes so that a "sign flipping” occurs, which effectively produces a negative coupling. Since the flux threading a unit cell is defined as the accumulated phase of the wavefunction that loops around a unit cell plaquette, the resulting flux induced in the system has a value of π. We first validate that the π flux threads through this square unit cell by comparing three unit cell plaquettes as shown in Fig. 1: those composed of only s orbitals without and with π flux, and a unit cell plaquette composed of both s and p orbitals.
To compare the three unit cell plaquettes, we computed the eigenvalues and eigenmodes of the first two cases, having only s orbitals, using the tightbinding Hamiltonians, and the other case, having both s and p orbitals, using the fullcontinuum wave equation. For a unit cell plaquette without a π flux [Fig. 1a], the eigenvalues are −2γ,0,2γ, where only the zeroenergy states are twofold degenerate. Whereas for a unit cell plaquette, in that a π flux threading the plaquette is induced by introducing a negative coupling [Fig. 1b], the eigenvalues are \(\pm \sqrt{2}\gamma\), each of which is twofold degenerate. On the other hand, the eigenvalues and eigenmodes of the unit cell plaquette with both s and p orbitals calculated using the fullcontinuum wave equation show a great resemblance with the unit cell with the synthetic π flux [Fig. 1c], where the bulk gap is opened. The similarity between these two unit cell plaquettes validates that the specific arrangement of having two p orbitals in the same unit cell aligned at different angles induces the effective magnetic flux of π per plaquette.
For the tightbinding description of the model, we choose a base where all s orbitals have a phase of zero and one fixed site of the p orbital has a phase of zero while the opposite site has a phase of π. In Fig. 1c and Fig. 2a, zero and π phases of the basis states are colored in blue and red, respectively. As the hopping is determined by the overlap of the base states, the "negative part” of the p orbital results in some negative hoppings. Then, the tightbinding bulk Hamiltonian of this system becomes:
where a is the lattice constant, γ and λ are the nearestneighbor coupling terms within and across unit cells, respectively, the Γmatrices^{18} are Γ_{j} = − τ_{2}⨂σ_{k} for j ∈ {1, 2, 3}, Γ_{0} = τ_{3}⨂σ_{0}, Γ_{4} = τ_{1}⨂σ_{0} where τ and σ are Pauli matrices for the degrees of freedom within a unit cell. When the onsite energy of the s and p orbitals are the same, δ = 0. This Hamiltonian closely resembles those Hamiltonians studied in the previous realizations of the quadrupole insulators^{18,20,21}, where the only difference is the sign of \(\lambda \cos ({k}_{x,y}a)\) in the first and third terms on the righthand side. The consequent difference is that at the phase transition point in the original model the bandgap closes at the M point, while in our model it occurs at the Γ point. In addition, this Hamiltonian has two mirror symmetries M_{x} and M_{y}, which do not commute with each other, and also has C_{4} symmetry. Figure 2b shows the 2D bulk band structure of our model in the topologically nontrivial phase, where the bandgap has opened at the Γ point due to the synthetic π flux in the system. For the system with open boundary conditions, as shown in Fig. 2a, the nontrivial quadrupole phase leads to gapped edge states and ingap corner states, as shown in Fig. 2c–e (see Supplementary Section I for a more detailed discussion of the symmetries and the topological quadrupole phases of the Hamiltonian).
We experimentally verify the quadrupole topology of the system by considering a twodimensional lattice of evanescentlycoupled waveguides. A square unit cell is composed of four waveguides: two elliptical waveguides, which have the major axes tilted from the yaxis by ± 45^{∘}, respectively, and two circular waveguides as shown in Fig. 2a. We control the radii of waveguides such that the lowestenergy mode (s orbital) of the circular waveguides and the secondlowestenergy mode (p orbital) of the elliptical waveguides have the same propagation constant, enabling them to couple with one another. The lowestenergy mode of the elliptical waveguides has a propagation constant far detuned from the other modes, such that they are well separated from our main system and can be neglected (see Supplementary Section II for the Eigenmode calculations with the fullcontinuum Hamiltonian).
The equation governing the diffraction of light through the waveguide array is:
where ψ(r, z) is the transverse electric field amplitudes at propagation distance z. \(\hat{H}\) is the wavelength (λ) dependent continuum Hamiltonian for the wave propagation in the waveguide array. Since we only consider a single bound mode for each waveguide and it evanescently couples to the neighboring waveguides, we can approximate the diffraction of light in our waveguide array using a tightbinding model, i∂_{z}ψ_{i}(z) = − ∑_{j}c_{ij}(λ)ψ_{j}(z), where ψ_{i} is the amplitude in the ith waveguide, and c_{ij}(λ) is the coupling constant between waveguides i and j at wavelength λ.
To experimentally observe the cornerlocalized topological modes, the light was injected into a waveguide at one of the corners of the waveguide array. In Fig. 3b, c, the diffracted light observed from the output facet for two different topological phases is shown. When the waveguides located at the corners of the waveguide array are excited in a trivial phase, the injected light spreads significantly into the bulk [Fig. 3b], which indicates that there is no cornerlocalized eigenmode. On the other hand, for the nontrivial phase, the light does not diffract into the bulk and is tightly confined close to the corner where the light was initially injected [Fig. 3c]. This confinement of the light at the injected corner is an indication of the presence of the corner modes and their localization is due to the nontrivial topology of the system. To prove further that the spatial localization of the corner modes in the nontrivial phase is not due to the weak coupling between the waveguides, light is injected at a waveguide in the center of the waveguide array. The injected light diffracts significantly into the bulk of the structure as shown in Fig. 3d, which supports further that the cornerlocalized mode shown in Fig. 3c emerges due to the nontrivial topology of the model.
However, the localization of the corner modes alone does not prove the quadrupole properties, as this behavior was also observed in a system similar to ours, just without a π flux. In this system, however, the corner state lies not in a bandgap but is a bound state in the continuum^{31}. To demonstrate that the corner localized modes in our system are indeed in bandgap and topologically nontrivial modes due to the quadrupole topology, we introduce auxiliary waveguides as shown in Fig. 4a. The auxiliary waveguides are weakly coupled to the lattice such that they can be used as an external drive injecting light into the lattice at the energy of their bound modes without significantly altering the intrinsic modes of the lattice^{19}. In the experiment, the centertocenter distance from the auxiliary waveguide to the waveguide at the corner is 2.1 μm. The auxiliary waveguide is identical to the circular waveguides in the lattice, therefore the energy of the light injected from the auxiliary waveguide into the lattice is at zero energy. In our system, the light initially injected at the auxiliary waveguide couples only to the corner state in the nontrivial phase [Fig. 4b] but does not couple into the system in the trivial phase [Fig. 4c]. An analogous experimental measurement of the corner mode localized at the porbital corner is presented in Fig. S4 in Supplementary Material section IV. "Observation of porbital corner mode". This proves experimentally that in our system with s and p orbitals, the π flux is induced in the unit cell, which opens the bandgap, and that the corner localized modes in the nontrivial phase are pinned at midgap due to the quadrupole topology of the system.
Discussion
In this work, we have demonstrated synthetic crystalline structures composed of multiple orbitals. We realized the quadrupole topological insulator in which synthetic π flux threading each plaquette is induced due to the different symmetry representations of the orbitals. To prove the nontrivial quadrupole topology of the system, we have experimentally verified that our realization of the quadrupole topological insulator has zerodimensional cornerlocalized modes in the middle of the band gap. As a very unique feature, this approach results in two distinct types of topologically protected corner modes having different symmetries of s and p orbitals that naturally extend to interesting applications that exploit those symmetries. Previously, the orbital degree of freedom has been nearly exclusively utilized in the ultracold atoms in optical lattices among diverse metamaterial systems. Different experimental platforms have their unique features, such as abilities to more precisely or actively control the gain/loss, onsite energies, or coupling strengths, which can be associated with the orbital degree of freedom to open the possibility to study richer physics. Our method of incorporating different orbitals could be extended into 3D to generate a quantized octupole insulator, by leveraging d and s orbitals in a cubic unit cell. Alternatively, by appropriate modulation of the onsite energy and coupling as a function of propagation distance (z), a dipole pumping could be realized, which can be interpreted as a topological insulator with hingelocalized chiral modes in (2+1)D^{28}. Furthermore, the realization of such photonic quadrupole topological insulators in the timereversal symmetric system can provide a more straightforward route to utilize the quadrupole topology in practical applications, since the geometry we present is easier to implement than the one proposed previously.
Methods
The radii of the major and minor axes of the elliptical waveguides in the experiment are 0.6 μm and 1.3 μm, and the radius of the circular waveguides is 0.5 μm. The centertocenter distances between the waveguides determine the coupling strength, which in our structure are dimerized to be 1.6 μm and 2.1 μm for strong and weak couplings, respectively. In our experimental system, the coupling strength decreases exponentially with increasing separation between waveguides. Although the longerrange couplings cannot be removed completely, the strength of the nextnearestneighbour coupling is sufficiently weak that the aforementioned tightbinding description of the system is a good approximation for our experimental system (for more detail, see Supplementary Section II for the Eigenmode calculations with the fullcontinuum Hamiltonian). The core of the waveguide is made out of the resin SU82 (Microchem) with a refractive index of \({n}_{{{{{{{{\rm{core}}}}}}}}}=1.59\) and is surrounded by IPDip (Nanoscribe), which has a refractive index of n_{clad} = 1.54. The sample was fabricated using a Nanoscribe Photonic Professional GT^{29,32,33,34} (see Supplementary Section III for Details about the Fabrication). For the measurements, light with a wavelength of 760 nm from a white light laser (NKT photonics with VARIA filter box) is injected with a 20× objective (NA = 0.4) to a selected waveguide at the input facet of the waveguide array. After the propagation through the 1 mm long structure, the diffracted light at the output facet is imaged with another 20× objective onto a CMOS camera (Thorlabs DDC1545M) [the measurement setup is sketched out in Fig. S3a].
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Jing, Y. et al. Tunable electronic structure of twodimensional transition metal chalcogenides for optoelectronic applications. Nanophotonics 9, 1675–1694 (2020).
Splendiani, A. et al. Emerging photoluminescence in monolayer MoS_{2}. Nano Lett. 10, 1271–1275 (2010).
Kuc, A., Zibouche, N. & Heine, T. Influence of quantum confinement on the electronic structure of the transition metal sulfide TS_{2}. Phys. Rev. B 83, 245213 (2011).
Bradlyn, B. et al. Topological quantum chemistry. Nature 547, 298–305 (2017).
Milićević, M. et al. Orbital edge states in a photonic honeycomb lattice. Phys. Rev. Lett. 118, 107403 (2017).
Milićević, M. et al. TypeIII and tilted Dirac cones emerging from flat bands in photonic orbital graphene. Phys. Rev. X 9, 031010 (2019).
CáceresAravena, G. & Vicencio, R. A. Perfect localization on flatband binary onedimensional photonic lattices. Phys. Rev. A 100, 013803 (2019).
CáceresAravena, G., Torres, L. E. F. F. & Vicencio, R. A. Topological and flatband states induced by hybridized linear interactions in onedimensional photonic lattices. Phys. Rev. A 102, 023505 (2020).
GuzmánSilva, D., CáceresAravena, G. & Vicencio, R. A. Experimental observation of interorbital coupling. Phys. Rev. Lett. 127, 066601 (2021).
Jörg, C. et al. Artificial gauge field switching using orbital angular momentum modes in optical waveguides. Light Sci. Appl. 9, 150 (2020).
Wirth, G., Ölschläger, M. & Hemmerich, A. Evidence for orbital superfluidity in the pband of a bipartite optical square lattice. Nat. Phys. 7, 147–153 (2011).
SoltanPanahi, P., Lühmann, D.S., Struck, J., Windpassinger, P. & Sengstock, K. Quantum phase transition to unconventional multiorbital superfluidity in optical lattices. Nat. Phys. 8, 71–75 (2012).
Yin, S., Baarsma, J. E., Heikkinen, M. O. J., Martikainen, J.P. & Törmä, P. Superfluid phases of fermions with hybridized s and p orbitals. Phys. Rev. A 92, 053616 (2015).
Sun, K., Gu, Z., Katsura, H. & Das Sarma, S. Nearly flatbands with nontrivial topology. Phys. Rev. Lett. 106, 236803 (2011).
Sun, K., Liu, W. V., Hemmerich, A. & Das Sarma, S. Topological semimetal in a fermionic optical lattice. Nat. Phys. 8, 67–70 (2012).
Li, X., Zhao, E. & Liu, W. V. Topological states in a ladderlike optical lattice containing ultracold atoms in higher orbital bands. Nat. Commun. 4, 1523 (2013).
Polo, J., Mompart, J. & Ahufinger, V. Geometrically induced complex tunnelings for ultracold atoms carrying orbital angular momentum. Phys. Rev. A 93, 033613 (2016).
Benalcazar, W. A., Bernevig, B. A. & Hughes, T. L. Quantized electric multipole insulators. Science 357, 61–66 (2017).
Noh, J. et al. Topological protection of photonic midgap defect modes. Nat. Photonics 12, 408–415 (2018).
Peterson, C. W., Benalcazar, W. A., Hughes, T. L. & Bahl, G. A quantized microwave quadrupole insulator with topologically protected corner states. Nature 555, 346–350 (2018).
SerraGarcia, M. et al. Observation of a phononic quadrupole topological insulator. Nature 555, 342–345 (2018).
Qi, Y. et al. Acoustic realization of quadrupole topological insulators. Phys. Rev. Lett. 124, 206601 (2020).
Imhof, S. et al. Topolectricalcircuit realization of topological corner modes. Nat. Phys. 14, 925–929 (2018).
Mittal, S. et al. Photonic quadrupole topological phases. Nat. Photonics 13, 692–696 (2019).
Chen, X.D. et al. Direct observation of corner states in secondorder topological photonic crystal slabs. Phys. Rev. Lett. 122, 233902 (2019).
Xie, B.Y. et al. Visualization of higherorder topological insulating phases in twodimensional dielectric photonic crystals. Phys. Rev. Lett. 122, 233903 (2019).
Xie, B. et al. Higherorder band topology. Nat. Rev. Phys. 3, 520–532 (2021).
Benalcazar, W. A., Bernevig, B. A. & Hughes, T. L. Electric multipole moments, topological multipole moment pumping, and chiral hinge states in crystalline insulators. Phys. Rev. B 96, 245115 (2017).
Jörg, C., Letscher, F., Fleischhauer, M. & Freymann, G. V. Dynamic defects in photonic floquet topological insulators. N. J. Phys. 19, 083003 (2017).
Szameit, A. & Nolte, S. Discrete optics in femtosecondlaserwritten photonic structures. J. Phys. B Mol. Opt. Phys. 43, 163001 (2010).
Cerjan, A., Jürgensen, M., Benalcazar, W. A., Mukherjee, S. & Rechtsman, M. C. Observation of a higherorder topological bound state in the continuum. Phys. Rev. Lett. 125, 213901 (2020).
Fedorova (Cherpakova), Z. et al. Limits of topological protection under local periodic driving. Light. Sci. Appl. 8, 63 (2019).
Cohen, M.I. et al. Generalized laws of refraction and reflection at interfaces between different photonic artificial gauge fields. Light. Sci. Appl. 9, 200 (2020).
Schulz, J., Vaidya, S. & Jörg, C. Topological photonics in 3D microprinted systems. APL Photonics 6, 080901 (2021).
Acknowledgements
We thank Christina Jörg for useful discussions. G.v.F. and J.S. acknowledge funding by the Deutsche Forschungsgemeinschaft through CRC/Transregio 185 OSCAR (project No. 277625399). G.B. and J.N. acknowledge the support of the US Office of Naval Research (ONR) Multidisciplinary University Research Initiative (MURI) grant N000142012325 on Robust Photonic Materials with HighOrder Topological Protection. W.A.B. is thankful for the support of the Moore Postdoctoral Fellowship at Princeton University.
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
J.S., J.N., and W.A.B. conceived the project. J.S. and J.N. performed numerical simulations, designed the sample, and performed data analysis. J.S. fabricated and characterized the sample, and performed the optical probing experiment. G.B. and G.v.F. supervised all aspects of the project. All authors contributed to writing the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Alexander Khanikaev, JianHua Jiang, and the other anonymous reviewer(s) for their contribution to the peer review of this work. Peer review reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Schulz, J., Noh, J., Benalcazar, W.A. et al. Photonic quadrupole topological insulator using orbitalinduced synthetic flux. Nat Commun 13, 6597 (2022). https://doi.org/10.1038/s41467022338946
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467022338946
This article is cited by

Realization of photonic porbital higherorder topological insulators
eLight (2023)

Orbital topological edge states and phase transitions in onedimensional acoustic resonator chains
Nature Communications (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.