Abstract
Trisubstituted alkenes are important organic synthons and have broad applications in the synthesis of many pharmaceuticals and materials. The stereoselective synthesis of such compounds has long been a research focus for organic researchers. Herein, we report a three-component, reductive cascade, cross-coupling reaction for the arylalkylation of alkynes. A wide range of trisubstituted alkenes are obtained in good to high yields with excellent chemo- and stereoselectivity by switching between electrochemistry and photocatalysis. The E isomer of the product is obtained exclusively when the reaction is conducted with electricity and nickel, while the Z isomer is generated with high stereoselectivity when photo- and nickel dual catalysts are used. Moreover, photo-assisted electrochemically enabled nickel catalyzed protocol is demonstrated to selectively deliver Z-trisubstituted alkenes without the addition of photocatalysts.
Similar content being viewed by others
Introduction
Trisubstituted alkenes are important organic synthons and have broad applications in the synthesis of many drugs, materials, and fine chemicals1,2. Applying multicomponent reactions (MCRs) to perform one-pot alkyne difunctionalizations3,4, which involves the installation of two chemical bonds across triple bonds in one synthetic operation, is one of the most straightforward and powerful strategies for preparing valuable trisubstituted alkenes. To date, the construction of trisubstituted alkenes with high stereoselectivity continues to be a challenging topic for organic chemists5. Although great efforts have been made6, the established methodologies are confined to one stereoisomer generation7,8,9,10 or require starting materials with fixed configurations11, and few cases have successfully produced the corresponding alkenes in both Z and E stereoselectivities12.
In the last five years, photocatalysis and electrochemistry have emerged as two powerful platforms for the construction of a wide range of organic molecules13,14,15,16. In particular, dual catalysis that combines transition metals with photocatalysts17,18,19,20,21,22,23,24,25,26,27,28,29 or electricity30,31,32,33,34,35,36,37,38,39,40,41,42 provides opportunities for the development of more general and efficient catalytic methodologies43. In contrast to traditional cross-coupling processes in which the oxidative addition or reductive elimination steps often require high temperatures or the assistance of elaborated ligands44, these dual catalytic strategies can usually be applied under mild reaction conditions. Considering the reaction mechanisms, photocatalysts or electricity can act as both oxidant and reductant, enabling single-electron transfers (SET) to reactants or transition metal intermediates. In addition to their fundamentally common ground, photocatalysis and electrochemistry also have respective catalytic advantages. Homogeneous photocatalysis possesses one more catalytic mode involving an energy transfer (ET) pathway since the excited photocatalyst can undergo Dexter energy transfer with the substrate or metal complex, thus expanding the types of organic transformations45,46. For heterogeneous electrochemistry, the current or voltage can be adjusted to the reaction requirements, allowing unprecedented organic transformations that cannot occur with chemical oxidants or reductants (Zn/Mn). Thus, the process is an appealing synthetic alternative considering that the availability of photosensitizers for targeted adjustment and appropriate redox potentials with cross-coupling catalysts is not always given (Fig. 1a). Recently, elegant electrochemical oxidative cross-coupling reactions have been reported47,48. However, electrochemical reductive cross-couplings remain less developed49.
In recent years, our group has contributed to the field of combined metal/photoredox dual catalysis and has developed cascade reactions that proceed with high chemo-, regio-, and stereoselectivity under mild conditions. In these cases, the arylsulfonylation cross-coupling products of trisubstituted alkenes can be obtained with either anti- or syn-selectivity by choosing an appropriate photocatalyst with suitable triplet energy12. However, when we extended this photoredox and nickel dual-catalyzed redox neutral cascade protocol to the more interesting alkylarylations of alkynes, only syn addition trisubstituted alkenes bearing three different carbon-linked groups could be obtained9. The reason for this limitation is that a photocatalyst with high triplet energy must be used for the generation of alkyl radicals, thus leading to the inevitable E to Z isomerization of the generated products via an energy transfer process. To address this issue and given the underlying principle in both photoredox and electrochemical processes is electron transfer, we supposed that electrochemical nickel catalysis would be a good choice to address this problem. However, under electrochemical conditions, the generation of alkyl radicals via an oxidation pathway is typically difficult due to anodic overoxidation that produces alkyl cations50. Therefore, we turned our attention to the reductive pathway. In this case, the radical can be generated from alkyl halides via a reduction pathway and participate in the nickel catalytic cycle without the late-stage energy transfer process that occurs in photo/Ni dual catalysis, thus providing the possibility for the development of electrochemical nickel catalyzed reductive cascade cross-couplings to form anti-addition products (Fig. 1b).
Our initial results showed that traditional reductants such as Mn51, Zn, Mg, and TDAE52 were inefficient in this three-component cross-electrophile coupling, affording low or no yield of the desired product. Photocatalysts including [Ir(dFCF3ppy)2dtbbpy]PF6, Ru(bpy)3(PF6)2, 4CzIPN and Eosin Y all showed low catalytic reactivity or generated products with poor stereoselectivity (Fig. 1c).
In this work, photocatalyst Pc1 bearing a suitable triplet energy could selectively generate the syn-selective isomer as the main product. Significantly, when we conducted the reaction under electrochemical conditions, the anti-selective isomer was obtained as the main product in good yield with excellent stereoselectivity since the ET process was avoided. Thus, stereocontrol was realized to give both isomers of the product via elaborate switching between electrochemistry and photocatalysis. Moreover, syn-selective isomer could also be obtained via photo-assisted electrochemistry in the absence of photocatalyst (Fig. 1d).
Results
Substrate scope
The scope of the nickel catalyzed electrochemical reductive cascade cross-coupling reaction was explored next (Fig. 2). A series of aryl bromides underwent this process smoothly, giving the corresponding three-component product in moderate to high yields. The transformation proceeded with not only exclusive stereoselectivity but also high chemoselectivity, which was well illustrated by the tolerance of different types of functional groups, such as ketones, esters, cyanos and sulfones as well as trifluoromethyl, trifluoromethoxy and trifluoromethylthio (1–8). Steric hindrance has some effect on the efficiency of the transformation, as ortho cyano-substituted aryl bromide gave a lower yield than that of the para-surrogate (10 and 11). Notably, aryl bromide bearing a reactive aldehyde group was also a suitable substrate for this reaction and gave the arylalkylation product in an 85% yield (9). Di-substituted and naphthyl bromides reacted well, albeit with moderate efficiency (12 and 13). Additionally, bicyclic and heteroaryl bromides participated in the reaction in high yields (14 and 15). Significantly, aryl bromides derived from probenecid and galactopyranose could also be applied, demonstrating that this cross-electrophile coupling is practical and can be broadly applied (16 and 17). Regarding alkyne coupling partners, a wide range of electronically and sterically diverse terminal alkynes could undergo this electrochemical process, delivering the corresponding anti-addition product in moderate to excellent yields. Ethynylbenzenes containing electron-donating and electron-withdrawing functional groups such as ethers, alkyl, amine, fluoro, trifluoromethyl, trifluoromethoxy, and methyl ester were all amenable to this procedure (18–28). Remarkably, a number of sensitive functional groups, including borate ester, chloride, and unprotected free hydroxy groups, remained untouched during the reaction, providing the possibility for late functionalization (22, 23, and 33). Unlike aryl bromides, the steric properties of the alkynes had almost no effect on the catalytic activity (29–35). Alkynes bearing π-extended systems reacted well (36–38). Moreover, 3-ethynylthiophene, cyclohexenyl alkyne, and estrone-derived alkyne could also be easily converted to the products (39–41). In addition, a variety of linear tertiary alkyl bromides bearing phenyl, ether, phthalimidyl, and ester groups coupled with the alkyne and aryl halides effectively (42–50). Importantly, alkyl bromides containing probenecid motifs could also give the product in high yield (51). Additionally, the cyclic tertiary bromide bearing a tetrahydropyran moiety proved to be an effective substrate, affording the desired product in a good yield (52).
In contrast, trisubstituted alkenes were selectively obtained in a syn addition when the arylalkylation reactions were performed under photoredox/nickel dual catalysis, which is due to the involvement of both SET and ET processes (Fig. 3). In this regard, the SET process contributes to the formation of product, while the ET process or direct excitation leads to the E/Z isomerization. The depletion of E isomer and accumulation of Z isomer may be attributed to the difference of conjugation level and triplet state energy of the resulting alkene isomers (Supplementary Fig. 22)12,53. Notably, the addition of LiCl as additive improved the yield (Supplementary Table 6, entries 1 and 5). Regarding the scope of this protocol, many electron-poor aryl halides, electron-rich heterocyclic halides and natural product-derived surrogates all reacted in good to high yields with good to excellent steroselectivities (53–61). Alkynes containing electron-donating and electron-withdrawing functional groups as well as estrone-derived alkynes participated with excellent stereocontrol (62–70). Vinyl alkyne also smoothly underwent this reductive cascade reaction, albeit with moderate stereoselectivity (69). Notably, ortho-substituents on the alkyne aromatic ring led to the formation of pure syn addition products (65–68). Linear alkyl bromides bearing diverse motifs and cyclic alkyl bromides were all suitable substrates for the efficient generation of syn addition products (71–77).
During the mechanistic investigations, we found that using 440 nm blue LEDs together with Pc1 could lead to efficient isomerization of the E isomer to the Z isomer, while in the absence of a photocatalyst, 440 nm irradiation resulted in no obvious isomerization. Further evaluation of the light sources revealed that 390 nm purple LEDs also led to efficient isomerization of the E isomer to the Z isomer without a photocatalyst, while the Z isomer in contrast did not isomerize to the E isomer (Fig. 4a). UV/Vis absorption spectroscopy of the E and Z isomers in DMA at the same concentration showed that the E isomer has a higher absorption intensity than that of the Z isomer at 390 nm. Additionally, fluorescence emission spectroscopy indicated that the E isomer has a much higher emission intensity than that of the Z isomer when excited by a 390 nm light source (Fig. 4b). Both of these observations rationalized the results illustrated in Fig. 4a. Considering these observations, we wondered whether we could achieve the arylalkylation of alkynes in a syn addition manner via the combination of 390 nm LED irradiation with an electrochemically nickel catalytic cycle and without the necessity of a photocatalyst. Gratifyingly, after minor optimizations, this photo-assisted electrochemical protocol worked efficiently for a series of aryl halides, alkynes and alkyl bromides, affording syn addition products with good to excellent stereoselectivities. Additionally, the reaction could be conducted in a sequential way in which the reaction mixture was directly irradiated by purple LED after the nickel-electrocatalytic process was complete (Fig. 4c). Likewise, ortho-substituents on the aromatic ring of alkyne could also deliver pure syn addition products (89–91). Of particular note is that alkynes bearing hydroxyl groups that failed in photo/nickel dual catalysis could give the corresponding syn-addition product with high stereoselectivity under these conditions (88), showcasing the advantage of these three catalytic pathways and their mutual complementation.
Synthetic application
Additionally, scale-up reactions were conducted for both the nickel-electrochemistry and nickel-photocatalysis, and no loss of yield and stereoselectivity occurred (Fig. 5a). Notably, although the Z isomer (53) was generated in a 93:7 ratio after nickel-photocatalysis, a pure Z product could be obtained after one cycle of simple recrystallization. Furthermore, via these three methods, both Panti and Psyn products of a more complex molecule (98) were synthesized in one simple step from three natural product-derived starting materials bearing probenecid, estrone, and galactopyranose motifs with good stereoselectivity (Fig. 5b). To further assess the synthetic potential of the newly developed methodologies in the construction of molecular complexity, a series of late-stage functionalizations of the generated trisubstituted alkene have also been performed despite its large steric hindrance. As illustrated in Fig. 5c, fluorinative alkoxylation, electrochemical hydrogenation, photochemical trifluoromethylation, epoxidation, and vinyl C-H bromination were all successfully realized, generating the corresponding product in good to excellent yields (99–103). These successful applications strongly indicate the high practicability of these mild reductive cascade cross-couplings.
Mechanistic studies
To further investigate the mechanism, a series of mechanistic experiments were performed. First, radical trapping experiments were conducted with two equivalents of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) or 1,1-diphenylethylene. They both suppressed the reaction completely, and the product with tertiary butyl group addition to 1,1-diphenylethylene was observed by GC–MS, suggesting the involvement of an alkyl radical in the transformation (Supplementary Information section 10). Stern-Volmer quenching experiments of all three starting materials and amine reductant show that only PMDTA quenches the photocatalyst Pc1. Additionally, cyclic voltammetry (CV) measurements show that both PMDTA (Eh/2 = 0.63 V vs. SCE) and TMEDA (Eh/2 = 0.62 V vs. SCE) could be oxidized by Pc1 or the anode (Supplementary Fig. 5–16). All of these results suggest that alkyl radicals may be generated from the reduction in alkyl bromide by nickel intermediates. Therefore, a Ni0-NiII- NiI- NiII- NiIII- NiI mechanism involving SET events and possible late-stage Z/E isomerization via energy transfer or direct excitation of the product (for photo-involved reactions) is proposed (Supplementary Fig. 22).
Discussion
In conclusion, we developed a three-component, reductive cascade cross-coupling reaction for the synthesis of E- and Z-trisubstituted alkenes via the one-pot arylalkylation of alkynes. We also report the stereoselective alkyne functionalization using electrochemistry. The stereoselectivity is well-controlled by simply switching between electrochemical and photocatalyzed approaches or by use of a photo-assisted electrochemical reaction. The results also demonstrate that electrochemistry and photocatalysis can be mutually complementary and provide an efficient strategy for the stereodivergent synthesis of valuable organic compounds.
Methods
General procedure for the electrochemical reactions
A dry 5-mL vial equipped with a Teflon-coated magnetic stir bar (10 mm*3 mm) was charged with aryl halide (0.2 mmol, 1 equiv., if solid), alkyl halide (0.6 mmol, 3 equiv., if solid), alkyne (0.4 mmol, 2 equiv., if solid), NiBr2·d(4-OMe)-bpy (8.7 mg, 0.02 mmol, 10 mol%), and nBu4NBr (129 mg, 0.4 mmol, 2 equiv.) in glovebox. Anhydrous and degassed DMA (4.0 mL), aryl halide (0.2 mmol, 1 equiv., if liquid), alkyl halide (0.6 mmol, 3 equiv., if liquid), alkyne (0.4 mmol, 2 equiv., if liquid), and TMEDA (90 μL, 0.6 mmol, 3 equiv.) were added via syringe. Then, it was capped with a Teflon lid equipped with graphite electrode (20 × 7 × 2 mm) as the anode and nickel foam electrode (20 × 10 × 1 mm) as the cathode. The reaction mixture was stirred and electrolyzed at a constant current of 4 mA for 16 h. After the reaction is completed, the mixture was transferred to a 100 mL round bottom flask via syringe, electrodes were washed with ethyl acetate. The solution was diluted with H2O (30 mL), and extract by ethyl acetate (3 × 20 mL), and the combined organic layers were concentrated with a rotary evaporator. The product was purified by flash column chromatography on silica gel using hexane/EtOAc as eluent.
General procedure for the photocatalyzed reactions
A dry reaction tube (10 mL) equipped with a Teflon-coated magnetic stir bar (6 mm*10 mm) was charged with aryl halide (0.4 mmol, 2 equiv., if solid), alkyl halide (0.6 mmol, 3 equiv., if solid), alkyne (0.2 mmol, 1 equiv., if solid), NiBr2·d(4-OMe)-bpy (8.7 mg, 0.02 mmol, 10 mol%), Pc1 (2.3 mg, 0.002 mmol, 1 mol%), and LiCl (26 mg, 0.6 mmol, 3 equiv.) in glovebox. Anhydrous and degassed DMA (1.0 mL), aryl halide (0.4 mmol, 2 equiv., if liquid), alkyl halide (0.6 mmol, 3 equiv., if liquid), alkyne (0.2 mmol, 1 equiv., if liquid), and PMDTA (125 μL, 0.6 mmol, 3 equiv.) were added via syringe. The reaction mixture was stirred for 16 h under irradiation with a 45 W Kessil PR160-440 nm blue LED lamp with 50 W fan cooling. After the reaction is completed, the mixture was transferred to a 100 mL round bottom flask via syringe. The solution was diluted with H2O (30 mL), and extract by ethyl acetate (3 × 20 mL), and the combined organic layers were concentrated with a rotary evaporator. The product was purified by flash column chromatography on silica gel using hexane/EtOAc as eluent.
General procedure for the photo-assisted electrochemical reactions
A dry 5-mL vial equipped with a Teflon-coated magnetic stir bar (10 mm*3 mm) was charged with aryl halide (0.2 mmol, 1 equiv., if solid), alkyl halide (0.6 mmol, 3 equiv., if solid), alkyne (0.4 mmol, 2 equiv., if solid), NiBr2·d(4-OMe)-bpy (8.7 mg, 0.02 mmol, 10 mol%), and nBu4NBr (65 mg, 0.2 mmol, 1 equiv.) in glovebox. Anhydrous and degassed DMA (4.0 mL), aryl halide (0.2 mmol, 1 equiv., if liquid), alkyl halide (0.6 mmol, 3 equiv., if liquid), alkyne (0.4 mmol, 2 equiv., if liquid), and TMEDA (90 μL, 0.6 mmol, 3 equiv.) were added via syringe. Then, it was capped with a Teflon lid equipped with graphite electrode (20 × 7 × 2 mm) as the anode and nickel foam electrode (20 × 10 × 1 mm) as the cathode. The reaction mixture was stirred, electrolyzed at a constant current of 6 mA under irradiation with two 52 W Kessil PR160-390 nm purple LED lamp with 50 W fan cooling for 48 h. After the reaction is completed, the mixture was transferred to a 100 mL round bottom flask via syringe, electrodes were washed with ethyl acetate. The solution was diluted with H2O (30 mL), and extract by ethyl acetate (3 × 20 mL), and the combined organic layers were concentrated with a rotary evaporator. The product was purified by flash column chromatography on silica gel using hexane/EtOAc as eluent.
Data availability
The authors declare that all data generated in this study are available within the article and the Supplementary Information.
References
Wang, H. et al. Photo-mediated selective deconstructive geminal dihalogenation of trisubstituted alkenes. Nat. Commun. 11, 4462 (2020).
Hesse, M. J., Butts, C. P., Willis, C. L. & Aggarwal, V. K. Diastereodivergent synthesis of trisubstituted alkenes through protodeboronation of allylic boronic esters: application to the synthesis of the Californian red scale beetle pheromone. Angew. Chem. Int. Ed. 51, 12444–12448 (2012).
Müller, T. J. J. & Deilhof, K. in Multicomponent Synthesis of Heterocycles in Multicomponent Reactions in Organic Synthesis (eds J. Zhu, Q. Wang, & M.-X. Wang) 333–378 (Wiley, Hoboken, 2015).
Tietze, L. F. & Modi, A. Multicomponent domino reactions for the synthesis of biologically active natural products and drugs. Med. Res. Rev. 20, 304–322 (2000).
Trost, B. M. & Li, C.-J. Modern Alkyne Chemistry. (Wiley-VCH, 2014).
Maryanoff, B. E. & Reitz, A. B. The Wittig olefination reaction and modifications involving phosphoryl-stabilized carbanions. Stereochemistry, mechanism, and selected synthetic aspects. Chem. Rev. 89, 863–927 (1989).
Guo, L., Song, F., Zhu, S., Li, H. & Chu, L. syn-Selective alkylarylation of terminal alkynes via the combination of photoredox and nickel catalysis. Nat. Commun. 9, 4548 (2018).
Li, Z., García‐Domínguez, A. & Nevado, C. Nickel‐catalyzed stereoselective dicarbofunctionalization of alkynes. Angew. Chem. Int. Ed. 55, 6938–6941 (2016).
Yue, H., Zhu, C., Kancherla, R., Liu, F. & Rueping, M. Regioselective hydroalkylation and arylalkylation of alkynes by photoredox/nickel dual catalysis: application and mechanism. Angew. Chem. Int. Ed. 59, 5738–5746 (2020).
Zhan, Y.-Z., Xiao, N. & Shu, W. Ni-catalyzed regio-and stereo-defined intermolecular cross-electrophile dialkylation of alkynes without directing group. Nat. Commun. 12, 928 (2021).
Nguyen, T. T., Koh, M. J., Mann, T. J., Schrock, R. R. & Hoveyda, A. H. Synthesis of E-and Z-trisubstituted alkenes by catalytic cross-metathesis. Nature 552, 347–354 (2017).
Zhu, C. et al. A multicomponent synthesis of stereodefined olefins via nickel catalysis and single electron/triplet energy transfer. Nat. Catal. 2, 678–687 (2019).
Liu, J., Lu, L., Wood, D. & Lin, S. New redox strategies in organic synthesis by means of electrochemistry and photochemistry. ACS Cent. Sci. 6, 1317–1340 (2020).
Hopkinson, M. N., Tlahuext-Aca, A. & Glorius, F. Merging visible light photoredox and gold catalysis. Acc. Chem. Res. 49, 2261–2272 (2016).
Yan, M., Kawamata, Y. & Baran, P. S. Synthetic organic electrochemical methods since 2000: on the verge of a renaissance. Chem. Rev. 117, 13230–13319 (2017).
Möhle, S. et al. Modern electrochemical aspects for the synthesis of value‐added organic products. Angew. Chem. Int. Ed. 57, 6018–6041 (2018).
Xuan, J., Zeng, T. T., Chen, J. R., Lu, L. Q. & Xiao, W. J. Room temperature C-P bond formation enabled by merging nickel catalysis and visible‐light‐induced photoredox catalysis. Chem. Eur. J. 21, 4962–4965 (2015).
Oderinde, M. S., Frenette, M., Robbins, D. W., Aquila, B. & Johannes, J. W. Photoredox mediated nickel catalyzed cross-coupling of thiols with aryl and heteroaryl iodides via thiyl radicals. J. Am. Chem. Soc. 138, 1760–1763 (2016).
Tellis, J. C., Primer, D. N. & Molander, G. A. Single-electron transmetalation in organoboron cross-coupling by photoredox/nickel dual catalysis. Science 345, 433–436 (2014).
Twilton, J., Zhang, P., Shaw, M. H., Evans, R. W. & MacMillan, D. W. The merger of transition metal and photocatalysis. Nat. Rev. Chem. 1, 0052 (2017).
Yue, H., Zhu, C. & Rueping, M. Cross‐coupling of sodium sulfinates with aryl, heteroaryl, and vinyl halides by nickel/photoredox dual catalysis. Angew. Chem. Int. Ed. 57, 1371–1375 (2018).
Huang, L. et al. Bioinspired desaturation of alcohols enabled by photoredox proton-coupled electron transfer and cobalt dual catalysis. Nat. Commun. 13, 809 (2022).
Yue, H., Zhu, C., Huang, L., Dewanji, A. & Rueping, M. Advances in allylic and benzylic C–H bond functionalization enabled by metallaphotoredox catalysis. Chem. Commun. 58, 171–184 (2022).
Zhu, C., Yue, H., Chu, L. & Rueping, M. Recent advances in photoredox and nickel dual-catalyzed cascade reactions: pushing the boundaries of complexity. Chem. Sci. 11, 4051–4064 (2020).
Milligan, J. A., Phelan, J. P., Badir, S. O. & Molander, G. A. Alkyl carbon–carbon bond formation by Nickel/Photoredox cross‐coupling. Angew. Chem. Int. Ed. 58, 6152–6163 (2019).
Li, J., Luo, Y., Cheo, H. W., Lan, Y. & Wu, J. Photoredox-catalysis-modulated, nickel-catalyzed divergent difunctionalization of ethylene. Chem 5, 192–203 (2019).
Song, F. et al. Visible‐light‐enabled stereodivergent synthesis of E‐and Z‐configured 1, 4‐dienes by photoredox/nickel dual catalysis. Angew. Chem. Int. Ed. 59, 177–181 (2020).
Meng, Q. Y., Schirmer, T. E., Katou, K. & König, B. Controllable isomerization of alkenes by dual visible‐light‐cobalt catalysis. Angew. Chem. Int. Ed. 58, 5723–5728 (2019).
Sun, S. Z., Duan, Y., Mega, R. S., Somerville, R. J. & Martin, R. Site‐selective 1, 2‐dicarbofunctionalization of vinyl boronates through dual catalysis. Angew. Chem. Int. Ed. 59, 4370–4374 (2020).
Gandeepan, P., Finger, L. H., Meyer, T. H. & Ackermann, L. 3d metallaelectrocatalysis for resource economical syntheses. Chem. Soc. Rev. 49, 4254–4272 (2020).
Ackermann, L. Metalla-electrocatalyzed C–H activation by earth-abundant 3d metals and beyond. Acc. Chem. Res. 53, 84–104 (2019).
Gao, X., Wang, P., Zeng, L., Tang, S. & Lei, A. Cobalt (II)-catalyzed electrooxidative C–H amination of arenes with alkylamines. J. Am. Chem. Soc. 140, 4195–4199 (2018).
Zhu, C., Kale, A. P., Yue, H. & Rueping, M. Redox-neutral cross-coupling amination with weak N-nucleophiles: arylation of anilines, sulfonamides, sulfoximines, carbamates, and imines via nickelaelectrocatalysis. JACS Au 1, 1057–1065 (2021).
Zhu, C., Yue, H., Nikolaienko, P. & Rueping, M. Merging electrolysis and nickel catalysis in redox neutral cross-coupling reactions: experiment and computation for electrochemically induced C–P and C–Se bonds formation. CCS Chem. 2, 179–190 (2020).
Kumar, G. S. et al. Nickel‐catalyzed chain‐walking cross‐electrophile coupling of alkyl and aryl halides and olefin hydroarylation enabled by electrochemical reduction. Angew. Chem. Int. Ed. 59, 6513–6519 (2020).
Li, C. et al. Electrochemically enabled, nickel‐catalyzed amination. Angew. Chem. Int. Ed. 56, 13088–13093 (2017).
Kawamata, Y. et al. Electrochemically driven, Ni-catalyzed aryl amination: scope, mechanism, and applications. J. Am. Chem. Soc. 141, 6392–6402 (2019).
Liu, D., Ma, H. X., Fang, P. & Mei, T. S. Nickel‐catalyzed thiolation of aryl halides and heteroaryl halides through electrochemistry. Angew. Chem. Int. Ed. 58, 5033–5037 (2019).
Mo, Y. et al. Microfluidic electrochemistry for single-electron transfer redox-neutral reactions. Science 368, 1352–1357 (2020).
Wang, Y. et al. Electrochemically promoted nickel-catalyzed carbon–sulfur bond formation. ACS Catal. 9, 1630–1634 (2019).
Samanta, R. C., Struwe, J. & Ackermann, L. Nickela‐electrocatalyzed mild C− H alkylations at room temperature. Angew. Chem. Int. Ed. 59, 14154–14159 (2020).
Zhang, L. & Hu, X. Nickel catalysis enables convergent paired electrolysis for direct arylation of benzylic C–H bonds. Chem. Sci. 11, 10786–10791 (2020).
Zhu, C., Yue, H., Jia, J. & Rueping, M. Nickel‐catalyzed C‐heteroatom cross‐coupling reactions under mild conditions via facilitated reductive elimination. Angew. Chem. Int. Ed. 60, 17810–17831 (2021).
Johansson Seechurn, C. C., Kitching, M. O., Colacot, T. J. & Snieckus, V. Palladium‐catalyzed cross‐coupling: a historical contextual perspective to the 2010 Nobel Prize. Angew. Chem. Int. Ed. 51, 5062–5085 (2012).
Molloy, J. J. et al. Boron-enabled geometric isomerization of alkenes via selective energy-transfer catalysis. Science 369, 302–306 (2020).
Zhou, Q. Q., Zou, Y. Q., Lu, L. Q. & Xiao, W. J. Visible‐light‐induced organic photochemical reactions through energy‐transfer pathways. Angew. Chem. Int. Ed. 58, 1586–1604 (2019).
Tang, S., Liu, Y. & Lei, A. Electrochemical oxidative cross-coupling with hydrogen evolution: a green and sustainable way for bond formation. Chem 4, 27–45 (2018).
Mei, R., Sauermann, N., Oliveira, J. O. C. & Ackermann, L. Electroremovable traceless hydrazides for cobalt-catalyzed electro-oxidative C–H/N–H activation with internal alkynes. J. Am. Chem. Soc. 140, 7913–7921 (2018).
Yuan, Y. & Lei, A. Is electrosynthesis always green and advantageous compared to traditional methods? Nat. Commun. 11, 802 (2020).
Xiang, J. et al. Hindered dialkyl ether synthesis with electrogenerated carbocations. Nature 573, 398–402 (2019).
He, Y. et al. Nickel-Catalyzed Ipso/Ortho Difunctionalization of Aryl Bromides with Alkynes and Alkyl Bromides via a Vinyl-to-Aryl 1, 4-Hydride Shift. J. Am. Chem. Soc. 143, 20064–20070 (2021).
Garcia-Dominguez, A., Li, Z. & Nevado, C. Nickel-catalyzed reductive dicarbofunctionalization of alkenes. J. Am. Chem. Soc. 139, 6835–6838 (2017).
Metternich, J. B. & Gilmour, R. A bio-inspired, catalytic E → Z isomerization of activated olefins. J. Am. Chem. Soc. 137, 11254–11257 (2015).
Acknowledgements
This work was financially supported by the King Abdullah University of Science and Technology (KAUST), Saudi Arabia, Office of Sponsored Research (URF/1/4025).
Author information
Authors and Affiliations
Contributions
C.Z., H.Y. and M.R. conceived and designed the project. C.Z. and H.Y. performed and analyzed the experiments. C.Z., H.Y. and M.R. co-wrote the manuscript. M.R. directed the whole research.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhu, C., Yue, H. & Rueping, M. Nickel catalyzed multicomponent stereodivergent synthesis of olefins enabled by electrochemistry, photocatalysis and photo-electrochemistry. Nat Commun 13, 3240 (2022). https://doi.org/10.1038/s41467-022-30985-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-30985-2
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.