Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Synthetic exploration of sulfinyl radicals using sulfinyl sulfones

Abstract

Sulfinyl radicals – one of the fundamental classes of S-centered radicals – have eluded synthetic application in organic chemistry for over 60 years, despite their potential to assemble valuable sulfoxide compounds. Here we report the successful generation and use of sulfinyl radicals in a dual radical addition/radical coupling with unsaturated hydrocarbons, where readily-accessed sulfinyl sulfones serve as the sulfinyl radical precursor. The strategy provides an entry to a variety of previously inaccessible linear and cyclic disulfurized adducts in a single step, and demonstrates tolerance to an extensive range of hydrocarbons and functional groups. Experimental and theoretical mechanistic investigations suggest that these reactions proceed through sequential sulfonyl and sulfinyl radical addition.

Introduction

Organosulfur compounds are of fundamental importance in synthetic and biological chemistry. They are widespread in molecules such as natural products, proteins, and pharmaceuticals, playing a central role in biology as structural elements and key mediators of biological processes1,2,3,4, and providing vital tools for organic synthesis5,6,7,8,9,10. Many methodologies and sulfur sources have been developed to install a variety of sulfur functionalities into organic molecules11,12,13,14. Among these, the use of sulfur-centered radicals to access sulfur-containing compounds has attracted considerable attention due to their ease of generation and efficiency of reaction15,16,17,18,19,20. However, in contrast to the popularity of sulfonyl and thiyl radicals, the utilization of sulfinyl radicals in synthetic chemistry has remained unexplored. This is due to the challenges of the inherent properties of sulfinyl radicals: their additions to π-systems are typically reversible, because of the relatively high stability of the sulfinyl radical21, and they also readily undergo homodimerization to form thiosulfonates (Fig. 1A)22. We hypothesized that a dual radical addition/radical coupling strategy might overcome these issues and open up possibilities for the application of sulfinyl radicals in organic synthesis, not least by providing a means to access sulfoxides, which are one of the most important classes of organosulfur compounds23,24,25. Specifically, the coupling of a sulfinyl radical with an in situ generated highly reactive carbon-centered radical could suppress the homo-coupling of the sulfinyl radical and also avoid the generation of a radical at the β-position to the sulfinyl group, thus preventing the undesired β-elimination of the sulfinyl group. Key to the implementation of this strategy is a suitable reagent that under mild conditions can simultaneously release a sulfinyl radical and another radical species of higher reactivity.

Fig. 1: The research history of sulfinyl sulfones and their application as a precursor of sulfinyl radical.
figure1

A Design of a strategy for the application of sulfinyl radicals in organic synthesis; B the discovery history of sulfinyl sulfones, with emphasis on the limited synthetic access and applications; C sulfinylsulfonation of various unsaturated hydrocarbons with in situ formed sulfinyl sulfones; D The synthesis, single-crystal X-ray structure of sulfinyl sulfone 1, comparison of the S–S bond length (Å) with that of other analogous compounds, and the sulfinylsulfonation of phenylacetylene.

Sulfinyl sulfones (Fig. 1B), which are high-valent analogs of disulfides, have been known for over a century26. However, their structure and reactivity have only been sporadically investigated27,28,29,30; the perception that sulfinyl sulfones are unstable, hard-to-handle materials, along with a lack of reliable methods for their synthesis, has deterred research and restricted their occasional use as electrophilic sulfur sources31,32,33. A single report suggested that their thermal decomposition might proceed via homolytic fission, generating two distinct sulfur-centered radicals—a sulfinyl radical and a sulfonyl radical34. As sulfonyl radicals are known to undergo facile addition to π-bonds17,18,19, sulfinyl sulfones appeared to be well suited for our envisioned strategy.

Here we describe the successful generation and use of sulfinyl sulfones in radical addition/radical coupling reactions with a wide variety of unsaturated hydrocarbons (Fig. 1C). This chemistry offers a strategy for the synthesis of sulfoxide-containing molecules, which are of widespread utility throughout the organic synthesis. Moreover, this reaction provides a simple and efficient method to access high-value disulfurized products, the synthetic utility of which is demonstrated by selective transformation of either the sulfonyl or sulfinyl group into a variety of other building blocks in a controllable fashion.

Results

Synthesis, structure, and reactivity of sulfinyl sulfone 1

We hypothesized that these disulfide derivatives might be prepared by nucleophilic attack of a sulfinate anion on a suitably activated S-electrophile and questioned whether sulfinate salts might serve as the source of both species. After significant efforts, we found that sulfinyl sulfone 1 could indeed be directly prepared by the reaction of sodium p-toluenesulfinate with acetyl chloride in chloroform under a nitrogen atmosphere (72% yield, Fig. 1D). The identity of 1 was confirmed by single-crystal X-ray diffraction analysis, which revealed a S–S bond length of 2.230 Å; this is significantly longer than the S–S bond lengths of other disulfide derivatives35,36,37,38 and may explain the lability of sulfinyl sulfones: while 1 can be stored without decomposition at −18 °C for over 4 months under a nitrogen atmosphere as solid or as the solution in deuterated chloroform, it is sensitive to air and temperatures above 25 °C (Supplementary Fig. 1). We next tested sulfinyl sulfone 1 as a sulfinyl radical source for reaction with phenylacetylene. When 1 was reacted with phenylacetylene at 40 °C within 30 min, a disulfurized adduct 2 was obtained in nearly quantitative yield, the regioselectivity and stereoselectivity of addition being confirmed through single-crystal X-ray diffraction (Fig. 1D).

Scope of terminal alkynes

We further questioned whether the synthesis of a sulfinyl sulfone and its subsequent reaction with an unsaturated hydrocarbon could be achieved directly from the sodium sulfinate salt. This indeed turned out to be the case, as the reaction of sodium toluenesulfinate, acetyl chloride, and a variety of alkynes for 30 min under mild heating afforded the corresponding E-β-sulfinyl vinylsulfones 240 in high yield (Fig. 2A). Terminal (cyclo)alkyl alkynes provided additional products 313 in good yield, whereas the reaction with aryl alkynes resulted in near-quantitative yield, regardless of the steric and electronic properties of the substituents (1429), with the possible exception of 4-nitrophenylacetylene (23, 75%). Equally productive were a naphthyl and two thienyl alkynes (3032). A conjugated enyne was chemoselectively converted into product 33 with the alkene moiety untouched; however, alkynes featuring functional groups sensitive to acetyl chloride (hydroxyl, amino, carboxyl, amide) required the use of preformed sulfinyl sulfone 1 (12, 13, 27, and 28).

Fig. 2: The sulfinylsulfonation of unsaturated hydrocarbons.
figure2

A Sulfinylsulfonation of alkynes and alkenes; B cascade sulfinylsulfonation of enynes. All yields are isolated yields. Diastereomeric ratios are shown in parentheses where appropriate. Amounts of reagents and solvent: alkyne/alkene/enyne (0.3 mmol), TolSO2Na (1.8 mmol), CH3COCl (1.2 mmol), 0.1 M in CHCl3, N2. a40 °C, 30 min. b10 °C, 10 h. cReaction conditions for gaseous olefins: TolSO2Na (1.8 mmol), CH3COCl (1.2 mmol), CHCl3 (3 mL), 10 °C, 20 h, ethylene/1,3-butadiene (1 atm); the yield of product was calculated using TolSO2Na as the standard. d40 °C, 5 h. eRoom temperature, 8 h. *Reaction conditions for the synthesis of 12, 13, 27, and 28: alkyne (0.3 mmol), 1 (0.45 mmol), 0.1 M in CHCl3, N2, 40 °C, 0.5 h.

Scope of internal alkynes

While the regioselectivity of the reaction with terminal alkynes is dictated by the obvious difference in sterics, for internal alkynes the control on regiochemistry of the products is typically challenging. After ascertaining that our method can deliver a tetrasubstituted disulfurized alkene in good yield, as demonstrated with the E-2-butenyl product 34, the reaction protocol was tested with aryl alkyl alkyne substrates, delivering alkenes 3540 in high yield and exceptional regioselectivity for the product featuring the sulfinyl group positioned adjacent to the aromatic ring, irrespective of the nature of the functional groups on the arene or alkyl chain. In particular, bromoalkene 40, further amenable for functionalization, was obtained as a single isomer. In all cases, the exquisite Z-stereoselectivity remained confirmed.

Scope of alkenes

We next turned our attention to the disulfurization of monosubstituted alkene and obtained products 4247 with high efficiency and regioselectivity. Even ethylene gas could be converted to sulfinyl sulfone 41 at atmospheric pressure in good isolated yield. Equally successful was the methodology with a range of acyclic and (hetero)cyclic 1,1-disubstituted alkenes, resulting in products 4863. The structural determination of 49 by single-crystal X-ray diffraction confirmed the regioselectivity of addition, in analogy to what was observed with terminal alkynes and arylalkyl alkynes. As small carbocyclic and heterocyclic rings have been increasingly included in the design of pharmaceutical interest for their favorable physicochemical properties, as opposed to sp2-hybridized scaffolds39,40,41, disulfurized products such as 49 and 5355 could be attractive building blocks in medicinal chemistry, especially in consideration of the potential further derivatization of the two distinct sulfur-based moiety, as discussed later. 1,2-Disubstituted linear and cyclic alkenes were also suited to the transformation, delivering adducts 6469 in generally high yield. However, for almost all terminal alkenes and unsymmetric internal alkenes, the sulfinylsulfonation products exhibit poor stereoselectivity. Finally, even 1,3- and 1,2-dienes (allenes) underwent the addition with complete regiocontrol, affording the respective 1,4-addition products 7072 with up to 6:1 E/Z selectivity and allylic sulfones 7378, respectively, in moderate-to-good yield.

Scope of 1,n-enynes

As a consequential development for our sulfinylsulfonylation methodology, we questioned whether it could be adopted in radical cascade cyclizations of 1,n-enynes, which notoriously enable the preparation of a variety of carbocyclic and heterocyclic compounds42. Such an approach would inevitably present the challenge of controlling the site-selectivity of the addition of either sulfur component onto the enyne moiety. When tested with our protocol, a few probe enyne substrates successfully undertook the targeted radical cascade reaction, delivering products with chemoselectivity and regioselectivity that strictly depended on the substitution pattern of the substrate (Fig. 2B). In particular, the cyclization of 1,6-enynes with a trisubstituted double bond and capped by a phenyl group on the alkyne yielded six-membered endocyclic vinyl sulfones as single regioisomers (7981). The structure of compound 79 was confirmed by single-crystal X-ray diffraction. Conversely, the regioselectivity of addition was completely reversed for 1,6-enynes with terminal alkynes, giving five-membered exocyclic vinyl sulfones (8284). A complete switch in chemoselectivity was observed for 1,6-enynes with a methylidene moiety, whereby the sulfonyl group was added to the alkene and the sulfinyl substituent to the alkyne. Phenyl alkynes delivered five-membered exocyclic vinyl sulfoxides (8587), while terminal alkynes reversed the regioselectivity of the cyclization, affording six-membered endocyclic vinyl sulfoxides (8890). Overall, this radical cascade enables the efficient formation of one C–C bond and two C–S bonds in one step and offers a powerful means for the construction of sulfur-containing carbocycles and heterocycles with exceptional control over both ring size and substituent regioselectivity.

Scope of arynes

Arynes are a class of highly reactive intermediates, generated in situ from certain precursors such as the most commonly used 2-(trimethylsilyl)phenyl triflates, and have rich reactivity, including multi-component reaction, aryne relay reaction, σ-bond insertion, cylcoaddition, and so on43. However, the radical reaction of arynes is quite rare, probably due to the low concentration and the high reactivity of both aryne and radical species generated in situ in the reaction system44. We therefore examined the tolerance of arynes as an unsaturated hydrocarbon in our methodology. In order to minimize the interference of reactants, the sulfinyl sulfone 1 was prepared separately and then employed in the reaction with 2-(trimethylsilyl)aryl triflates in the presence of CsF and 18-crown-6. We were pleased to find that both benzyne and naphthalyne precursors smoothly underwent the sulfinylsulfonation reaction to afford the corresponding disulfurized aromatics 9199, 101, and 103 in good-to-excellent yield (Fig. 3). The structure of 91 was confirmed with the help of single-crystal X-ray diffraction. The unsymmetric aryne precursors resulted in a 1:1 ratio of regioisomer mixture, which could be normalized through the oxidation leading to vicinal disulfone compounds 100, 102, and 104.

Fig. 3: The sulfinylsulfonation of arynes.
figure3

Reaction conditions: arynes (0.5 mmol), 1 (0.5 mmol), CsF (1.5 mmol), 18-crown-6 (1.5 mmol), DME (3 mL), 25 °C, N2, 3 h. a0 °C, N2, 1 h. b99, 101, or 103 (0.5 mmol), m-CPBA (0.75 mmol), DCM (3 mL), 25 °C, 1 h.

Scope of sodium sulfonates and synthetic utility

Further investigation of the reaction scope with respect to the sulfinate revealed that alkylsulfinates, as well as arylsulfinates with either electron-donating or electron-withdrawing groups, were readily converted into adducts 105119 in excellent yield (Fig. 4A). Alkyl sulfoxides and alkyl sulfones are widely found in drugs, such as tinidazole, apremilast, armodafinil, armodafinil, and fulvestrant1, 3. In general, these moieties are prepared by oxidation of sulfides; the disadvantage of this method is that it can be difficult to control the oxidation states of organosulfur—a mixture of sulfoxides and sulfones is often obtained, and there is a risk of undesired oxidation of other functional groups3. Our method avoids these problems by directly accessing desulfurized compounds containing alkyl sulfinyl and alkyl sulfonyl groups without the need for redox manipulations. Application of the sulfinylsulfonation methodology to the functionalization of alkyne functionality in selected natural products afforded disulfurized products 120125 in high yield (Fig. 4B). Further, the sulfinylsulfonation of intrinsic alkyne functionality in drugs such as erlotinib and clodinafop-propargyl ester also proved to be suitable and afforded the corresponding adducts 126 and 127 in high yield (Fig. 4C). These results demonstrate the utility of the sulfinylsulfonation method in functionalizing pharmaceutically relevant molecules. Moreover, the sulfinylsulfonation of aryne has been applied to the preparation of vortioxetine (Fig. 4D), indicating that the reaction has potential application in the preparation of medicines.

Fig. 4: The scope of sodium sulfonates and the application of sulfinylsulfonation in late-stage functionalization and synthesis of drug molecules.
figure4

A Variation of the sodium sulfinate. *Prop-1-yn-1-ylbenzene was used as the substrate; B disulfurization of natural product derivatives; C disulfurization of drug molecules. All yields are isolated yields. Reaction conditions for the synthesis of 105123: alkyne (0.3 mmol), sodium sulfinate (1.8 mmol), acetyl chloride (1.2 mmol), 0.1 M in CHCl3, N2. a40 °C, 30 min. b10 °C, 12 h. c121 or 122 (0.5 mmol), m-CPBA (0.75 mmol), DCM (10 mL), room temperature, 1 h. dErlotinib or Clodinafop-propargyl ester (0.5 mmol), 1 (1.0 mmol), CHCl3 (3.0 mmol), 40 °C, N2, 0.5 h. D The preparation of vortioxetine.

Large-scale synthesis and further transformations

Our sulfinylsulfonation protocol can be easily scaled up to more than 100-fold, as demonstrated by the uneventful preparation of a multigram quantity of compound 2 in 85% yield after recrystallization (Fig. 5). β-Sulfinyl vinylsulfones are newly synthesized compounds, and the synthetic utility of these now readily accessible disulfurized products was showcased by a large number of transformations. For instance, the selective functionalization of either the sulfonyl or sulfinyl motif in 2 was explored. Treatment of 2 with sodium hydride (NaH) results in an acetylenic sulfone 133 by eliminating the sulfinyl group. 1,8-Diazabicyclo[5.4.0]undec-7-ene as the base affords a product 134 by the selective reduction of the sulfonyl group. The reaction of 2 with SmI2 in tetrahydrofuran selectively leads to the desulfinated product 136, whereas SmI2 in hexamethylphosphoric triamide induces desulfonation and gives product 135. Nucleophilic addition/elimination reactions of the sulfinyl group in 2 with amines, azide, and alkoxides give products 140145, whereas sulfide and selenide ions displace the sulfonyl group to give compounds 137139. In both cases, inversion of stereochemistry is observed at the double bond (as confirmed by 1H-1H nuclear Overhauser effect spectroscopy analysis of 137 and 140). Use of Grignard reagent (EtMgBr) as the nucleophile results in the nucleophilic substitution of the sulfinyl group to give compounds 136 and 146, whereas an eliminative coupling product 147 is produced in the presence of Ni(acac)2. Oxidation of the vinyl sulfoxide with m-CPBA gives disulfone 148. The sulfinyl group reacts with benzyne affording a rearrangement product 149 via [2 + 2] cycloaddition/S-O-vinyl migration cascade45. Treatment of 2 with trifluoromethanesulfonic anhydride in acetonitrile leads to a product 150 by [3,3]-sigmatropic rearrangement reaction46. Note that some core structures of these products are present in the drug and natural products. For example, the 1,2-disulfonylehene moiety in 148 is the key structure of dimethipin, the 1,3-butadiyne unit in 147 is found as the core structure in natural products such as bupleurotoxin, lobetyolin, enanthotoxin, etc., and the β-sulfonyl enamine in 140142 is observed in adociaquinones.

Fig. 5: Large-scale synthesis and further transformations.
figure5

All yields are isolated yields. The amount of 2 is 0.5 mmol. aNaH (0.75 mmol), CH3CN (3.0 mL), 25 °C, 6 h. bDBU (5.0 mmol), toluene (3 mL), 100 °C, 6 h. cMethanol (5.0 mmol), hexamethylphosphoric triamide (HMPA, 2.5 mmol), SmI2 in THF (0.1 M, 25 mL), THF (1 mL), −20 °C, N2, 2 h. dSmI2 in THF (0.1 M, 25 mL), methanol/THF (v/v = 1/1, 1 mL), 25 °C, N2; then, 60 °C, 3 h. eNaH (0.75 mmol), RXH (0.75 mmol), CH3CN (3 mL), 25 °C, 5 h. fNaN3 (5.0 mmol), DMSO (3 mL), 25 °C, 0.5 h. gEtMgBr (1.0 mmol), THF (3 mL), 25 °C, N2, 3 h. h EtMgBr (1.0 mmol), Ni(acac)2 (0.005 mmol) THF (3 mL), 25 °C, N2, 3 h. im-CPBA (0.75 mmol), DCM (10 mL), 25 °C, 1 h. jCsF (3.0 mmol), 2-(trimethylsilyl)phenyl trifluoromethanesulfonate (1.5 mmol), CH3CN (5 mL), 55 °C, 12 h. kTf2O (1.0 mmol), DABSO (1.25 mmol), CH3CN (5 mL), −30 °C, 2 h.

Proposed mechanism

A proposed mechanism for the sulfinylsulfonation is shown in Fig. 6A, which begins with activation of the sulfinate salt with acetyl chloride to form intermediate (I). This intermediate undergoes reaction with a further equivalent of the sulfinate to give the sulfinyl sulfone 1. No reaction with phenyl acetylene was observed in the absence of acetyl chloride, confirming its essential role as an activator. Homolytic fission of the S–S bond in 1 generates sulfonyl radical A and sulfinyl radical B. The formation of these two radicals was confirmed by electron paramagnetic resonance experiments with the addition of free-radical spin-trapping agent 5,5-dimethyl-1-pyrroline N-oxide (Supplementary Fig. 2). In addition, we also found thiosulfonate as a by-product by the result of sulfinyl radical homocoupling. Based on our experimental observations of regioselectivity, the more electrophilic radical A is proposed to undergo addition to the unsaturated hydrocarbon, leading to the (more stable) carbon-centered radical II, which is then captured by the sulfinyl radical B to afford product 2. In support of the proposal of a radical process, the sulfinylsulfonation of phenylacetylene was completely suppressed in the presence of 2,2,6,6-tetramethylpiperidine 1-oxyl, whereas the use of cyclopropylethylene as substrate led to ring-opened product 151 (52%).

Fig. 6: Proposed mechanism and theoretical calculation research.
figure6

A Proposed mechanism and experimental support for a radical pathway; B DFT calculations and graphical representation of the proposed mechanistic pathway. The energies are in kcal mol−1 and represent the relative free energies calculated at the SMD-B3LYP/6-31+G(d,p) level in chloroform. The preparation of 1: TolSO2Na (1.8 mmol), CH3COCl (1.2 mmol), CHCl3 (3 mL), N2, rt, 2 h. The radical suppression reaction: phenylacetylene (0.3 mmol), TolSO2Na (1.8 mmol), CH3COCl (1.2 mmol), TEMPO (0.9 mmol), CHCl3 (3 mL), N2, 40 °C, 30 min. The radical clock reaction: cyclopropylethylene (0.3 mmol), TolSO2Na (1.8 mmol), CH3COCl (1.2 mmol), CHCl3 (3 mL), N2, 10 °C, 10 h.

Density functional theory (DFT) rationalization

The proposed mechanism was studied using DFT calculations at the SMD-B3LYP/6-31+G(d,p) level of theory (Fig. 6B; for additional details, see Supplementary Figs. 36). After a mildly endergonic cleavage of the S–S bond in reagent 1, the addition of the sulfonyl radical A to phenylacetylene via TS1 (∆G = 7.6 kcal mol−1) is favored by ∆∆G = 10.7 kcal mol−1 over the addition of the sulfinyl radical B, which would proceed via TS1′ (∆G = 18.3 kcal mol−1)—a highly endergonic and reversible process to give radical II′ (G0 = +17.1 kcal mol−1). The expected higher electrophilicity of A is reflected by the higher charge on the sulfur atom in A (1.27, calculated by natural population analysis), in contrast to B (0.61), thus favoring the attack of A over B on the alkyne, to give the stabilized radical II. The approach of the sulfinyl radical B to II is sterically directed to give the (E)-disulfurized product 2 via TS2, ∆G = 18.5 kcal mol−1, a lower energy pathway than that leading to (Z)-disulfurized product 2-1 via TS6, ∆G = 22.4 kcal mol−1, in agreement with the experimental findings where no (Z)-disulfurized product has ever been detected. Inclusion of dispersion effects by using the B3LYP-D3 functional leads to similar energies and conclusions (see Supplementary Fig. 7).

Discussion

In conclusion, we have described a strategy for the utilization of sulfinyl radicals in organic synthesis, overcoming the known tendency to undergo homo-coupling and β-cleavage. The reaction of unsaturated hydrocarbons by a radical mechanism with in situ generated sulfinyl sulfones revealed the potential to harness these compounds as a source of disulfurized organic molecules. The reaction scope spanned from cascade processes to derivatization of scaffolds found in natural products, affording a wide range of organosulfur compounds, which have broad potential use in organic synthesis, pharmaceutical, and materials research. In addition, this dual radical addition/radical coupling concept for the generation and use of sulfinyl radicals can serve as a general model for the development of other sulfur reagents.

Methods

The procedure for the synthesis of sulfinyl sulfone 1

In a Schlenk tube, CH3COCl (1.2 mmol) and sodium p-toluene sulfinate (1.8 mmol) were dissolved in CHCl3 (3 mL). The reaction mixture was stirred at room temperature for 2 h. Upon completion, petroleum ether (15 mL) was poured into the reaction mixture. The mixture was filtered and solid were collected. The resulting crude product was purified by a mixture of petroleum ether and ethyl acetate (petroleum ether/ethyl acetate = 10/1, 3 × 10 mL) to afford sulfinyl sulfone 1 as a white solid in 72% yield. (All the above operations were performed in the glove box.)

General procedure for the sulfinylsulfonation of alkynes

In a Schlenk tube, sodium sulfinates (1.8 mmol) and alkyne (0.3 mmol) were dissolved in CHCl3 (3 mL) under a N2 atmosphere, then CH3COCl (1.2 mmol) was added. The reaction mixture was stirred at 40 °C for 30 min. Upon completion, saturated sodium bicarbonate (30 mL) was added and the reaction was extracted with dichloromethane (2 × 30 mL), washed with brine (30 mL), dried over Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel with a gradient eluent of petroleum ether and ethyl acetate to provide the desired product.

General procedure for the sulfinylsulfonation of alkenes

In a Schlenk tube, sodium sulfinates (1.8 mmol) and alkene (0.3 mmol) were dissolved in CHCl3 (3 mL) under a N2 atmosphere, then CH3COCl (1.2 mmol) was added. The reaction mixture was stirred at 10 °C for 10 h. Upon completion, saturated sodium bicarbonate (30 mL) was added and the reaction was extracted with dichloromethane (2 × 30 mL), washed with brine (30 mL), dried over Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel with a gradient eluent of petroleum ether and ethyl acetate to provide the desired product.

General procedure for the sulfinylsulfonation of arynes

In the glove box, sulfinyl sulfone 1 (0.5 mmol), CsF (1.5 mmol), and 18-crown-6 (1.5 mmol) were dissolved in dimethyl ether (3 mL) in a Schlenk tube, then 2-(trimethylsilyl)aryl trifluoromethanesulfonate (0.5 mmol) was added. The reaction mixture was stirred at room temperature for 3 h. Upon completion, saturated ammonium chloride (30 mL) was added and the reaction was extracted with dichloromethane (2 × 30 mL), washed with brine (30 mL), dried over Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel with a gradient eluent of petroleum ether and ethyl acetate to provide the desired product.

Data availability

The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers 1994377, 1864547, 2003800, 2003798, 2058384, and 1907354. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif. Complete experimental procedures and compound characterization data are available in the Supplementary Information or from the corresponding author upon request.

References

  1. 1.

    Jacob, C. A scent of therapy: pharmacological implications of natural products containing redox-active sulfur atoms. Nat. Prod. Rep. 23, 851–863 (2006).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  2. 2.

    Mellah, M., Voituriez, A. & Schulz, E. Chiral sulfur ligands for asymmetric catalysis. Chem. Rev. 107, 5133–5209 (2007).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  3. 3.

    Jiang, X. Sulfur Chemistry. Topics in Current Chemistry (Springer, 2018).

  4. 4.

    Devendar, P. & Yang, G. Sulfur-containing agrochemicals. Top. Curr. Chem. 375, 82 (2017).

    Article  CAS  Google Scholar 

  5. 5.

    Guo, S., Cong, F., Guo, R., Wang, L. & Tang, P. Asymmetric silver-catalysed intermolecular bromotrifluoromethoxylation of alkenes with a new trifluoromethoxylation reagent. Nat. Chem. 9, 546–551 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  6. 6.

    Merchant, R. R. et al. Modular radical cross-coupling with sulfones enables access to sp3-rich (fluoro)alkylated scaffolds. Science 360, 75–80 (2018).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  7. 7.

    Knouse, K. W. et al. Unlocking P(V): reagents for chiral phosphorothioate synthesis. Science 361, 1234–1238 (2018).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  8. 8.

    Monos, T. M., McAtee, R. C. & Stephenson, C. R. J. Arylsulfonylacetamides as bifunctional reagents for alkene aminoarylation. Science 361, 1369–1373 (2018).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  9. 9.

    Berger, F. et al. Site-selective and versatile aromatic C-H functionalization by thianthrenation. Nature 567, 223–228 (2019).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  10. 10.

    Meng, G. et al. Modular click chemistry libraries for functional screens using a diazotizing reagent. Nature 574, 86–89 (2019).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  11. 11.

    Haut, F. et al. Synthetic entry to polyfunctionalized molecules through the [3+2]-cycloaddtion of thiocarbonyl ylides. J. Am. Chem. Soc. 141, 13352–13357 (2019).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  12. 12.

    Nguyen, B., Emmett, E. J. & Willis, M. C. Palladium-catalyzed aminosulfonylation of aryl halides. J. Am. Chem. Soc. 132, 16372–16373 (2010).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  13. 13.

    Ye, S., Qiu, G. & Wu, J. Inorganic sulfites as the sulfur dioxide surrogates in sulfonylation reactions. Chem. Commun. 55, 1013–1019 (2019).

    CAS  Article  Google Scholar 

  14. 14.

    Li, Y., Chen, S., Wang, M. & Jiang, X. Sodium dithionite-mediated decarboxylative sulfonylation: facile access to tertiary sulfones. Angew. Chem. Int. Ed. 59, 8907–8911 (2020).

    CAS  Article  Google Scholar 

  15. 15.

    Dénès, F., Pichowicz, M., Povie, G. & Renaud, P. Thiyl radicals in organic synthesis. Chem. Rev. 114, 2587–2693 (2014).

    PubMed  Article  CAS  PubMed Central  Google Scholar 

  16. 16.

    Glass, R. S. Sulfur radicals and their application. Top. Curr. Chem. 376, 22 (2018).

    Article  CAS  Google Scholar 

  17. 17.

    Lu, Q. et al. Dioxygen-triggered oxidative radical reaction: direct aerobic difunctionalization of terminal alkynes toward β-keto sulfones. J. Am. Chem. Soc. 135, 11481–11484 (2013).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  18. 18.

    García-Domínguez, A., Müller, S. & Nevado, C. Nickel-catalyzed intermolecular carbosulfonylation of alkynes via sulfonyl radicals. Angew. Chem. Int. Ed. 56, 9949–9952 (2017).

    Article  CAS  Google Scholar 

  19. 19.

    Ning, Y. et al. Silver-catalyzed stereoselective aminosulfonylation of alkynes. Angew. Chem. Int. Ed. 56, 13805–13808 (2017).

    CAS  Article  Google Scholar 

  20. 20.

    Wu, Z. & Pratt, D. A. Radical substitution provides a unique route to disulfides. J. Am. Chem. Soc. 142, 10284–10290 (2020).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  21. 21.

    Iino, M. & Matsuda, M. Studies of sulfinyl radicals. 2. Reversibility of addition to styrene. J. Org. Chem. 48, 3108–3109 (1983).

    CAS  Article  Google Scholar 

  22. 22.

    Freeman, F. & Keindl, M. C. Sulfinyl, α-sulfinyl, sulfonyl, and α-sulfonyl radicals. Sulfur Rep. 4, 231–298 (1985).

    CAS  Article  Google Scholar 

  23. 23.

    Pulis, A. P. & Procter, D. J. C-H Coupling reactions directed by sulfoxides: teaching an old functional group new tricks. Angew. Chem. Int. Ed. 55, 9842–9860 (2016).

    CAS  Article  Google Scholar 

  24. 24.

    Colomer, I. et al. From allylic sulfoxides to allylic sulfenates: fifty years of a never-ending [3+2]-sigmatropic rearrangement. Chem. Rev. 117, 14201–14243 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  25. 25.

    Kaldre, D., Klose, I. & Maulide, N. Stereodivergent synthesis of 1,4-dicarbonyls by traceless charge-accelerated sulfonium rearrangement. Science 361, 664–667 (2018).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  26. 26.

    Knoevenagel, E. & Polack, L. Über sulfinsäureanhydride. Ber 41, 3323–3331 (1908).

    Article  Google Scholar 

  27. 27.

    Oae, S. & Takata, T. Intervention of sulfinyl sulfone in the oxidation pathway of thiosulfonic S-ester to α-disulfone. Chem. Lett. 10, 845–848 (1981).

    Article  Google Scholar 

  28. 28.

    Aucott, S. M. et al. Crystal structures and molecular modeling of 1,8 chalcogenide-substituted naphthalenes. Heteroat. Chem. 15, 530–542 (2004).

    CAS  Article  Google Scholar 

  29. 29.

    Bredereck, H. et al. Disproportionierung der sulfinsäuren und die struktur der sulfinsäureanhydride. Angew. Chem. 70, 268–269 (1958).

    CAS  Article  Google Scholar 

  30. 30.

    Bredereck, H. et al. Die struktur der sulfinsäureanhydride. Ber 93, 2736–2742 (1960).

    CAS  Google Scholar 

  31. 31.

    Kice, J. L. & Guaraldi, G. Mechanisms of substitution reactions at sulfinyl sulfur. Solvolysis of aryl sulfinyl sulfones in acetic acid-water. J. Org. Chem. 31, 3568–3572 (1966).

    CAS  Article  Google Scholar 

  32. 32.

    Aucott, S. M. et al. Platinum complexes dibenzo[1,2]dithiin, dibenzo[1,2]dithiin oxides and related polyaromatic hydrocarbon ligands. Chem. Eur. J. 12, 895–902 (2006).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  33. 33.

    Akula, R. & Ibrahim, H. Tosyl cyanide as a C-sulfinylating agent: 3-sulfinylation of 4-hydroxycoumarins and related heterocycles. RSC Adv. 3, 25719–25722 (2013).

    ADS  CAS  Article  Google Scholar 

  34. 34.

    Kice, J. L. & Pawlowski, N. E. The decomposition of aromatic sulfinyl sulfones (sulfinic anhydrides). The facile homolysis of a sulfur-sulfur bond. J. Am. Chem. Soc. 86, 4898–4904 (1964).

    CAS  Article  Google Scholar 

  35. 35.

    Kiers, C. T. & Vos, A. The crystal and molecular structure of diphenyl disulfone. Recueil 91, 126–132 (1972).

    CAS  Article  Google Scholar 

  36. 36.

    Kiers, C. T. & Vos, A. The crystal and molecular structures of S-p-tolyl p-toluenethiosulfinate and S,S-diphenyl dithiosulfite. Recueil 97, 166–170 (1978).

    CAS  Article  Google Scholar 

  37. 37.

    Ferguson, G. et al. A second monoclinic polymorph of S-(4-tolyl) 4-toluenethiosulfonate at 150 and 293 K. Acta Cryst. C56, 692–694 (2000).

    CAS  Google Scholar 

  38. 38.

    Souto, J. A., Lewis, W. & Stockman, R. A. Isolation of stable non cyclic 1,2-disulfoxides. Revisiting the thermolysis of S-aryl sulfinimines. Chem. Commun. 50, 12630–12632 (2014).

    CAS  Article  Google Scholar 

  39. 39.

    Marson, C. M. New and unusual scaffolds in medicinal chemistry. Chem. Soc. Rev. 40, 5514–5533 (2011).

    CAS  PubMed  Article  Google Scholar 

  40. 40.

    Wuitschik, G. et al. Oxetanes as promising modules in drug discovery. Angew. Chem. Int. Ed. 45, 7736–7739 (2006).

    CAS  Article  Google Scholar 

  41. 41.

    Bull, J. A. et al. Oxetanes: recent advances in synthesis, reactivity, and medicinal chemistry. Chem. Rev. 116, 12150–12233 (2016).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  42. 42.

    Xuan, J. & Studer, A. Radical cascade cyclization of 1,n-enynes and diynes for the synthesis of carbocycles and heterocycles. Chem. Soc. Rev. 46, 4329–4346 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  43. 43.

    Tadross, P. M. & Stoltz, B. M. A comprehensive history of arynes in natural product total synthesis. Chem. Rev. 112, 3550–3577 (2012).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  44. 44.

    Scherübl, M., Daniliuc, C. G. & Studer, A. Arynes as radical acceptors: TEMPO-mediated cascades comprising addition, cyclization and trapping. Angew. Chem. Int. Ed. 60, 711–715 (2021).

    Article  CAS  Google Scholar 

  45. 45.

    Li, Y. & Studer, A. Reaction of arynes with vinyl sulfoxides: highly stereospecific synthesis of ortho-sulfinylaryl vinyl ethers. Org. Lett. 19, 666–669 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  46. 46.

    Shang, L. et al. Redox-neutral α-arylation of alkyl nitriles with aryl sulfoxides: a rapid electrophilic rearrangement. J. Am. Chem. Soc. 139, 4211–4217 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

Download references

Acknowledgements

Financial support was provided by NSFC (21871043, 21961130376), Department of Science and Technology of Jilin Province (20180101185JC, 20190701012GH, 20200801065GH), and the Fundamental Research Funds for the Central Universities (2412019ZD001, 2412019FZ006). E.A.A. thanks the EPSRC for support (EP/S013172/1). X.B. and E.A.A. thank Royal Society for a Newton Advanced Fellowship (NAF R1 191210).

Author information

Affiliations

Authors

Contributions

Z.W. and Z.Z. contributed equally to this work. Z.W. and X.B. conceived the strategy, designed the investigation, analyzed the data, and together with E.A.A., G.Z. and P.S. discussed the results and drafted this manuscript. Z.W., Z.Z., W.Z., P.S. and Y.W. performed the experiments and the calculations.

Corresponding author

Correspondence to Xihe Bi.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Communications thanks Valery Fokin, Robert Stockman and the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Wang, Z., Zhang, Z., Zhao, W. et al. Synthetic exploration of sulfinyl radicals using sulfinyl sulfones. Nat Commun 12, 5244 (2021). https://doi.org/10.1038/s41467-021-25593-5

Download citation

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing