Despite recent success in computational design of structured cyclic peptides, de novo design of cyclic peptides that bind to any protein functional site remains difficult. To address this challenge, we develop a computational “anchor extension” methodology for targeting protein interfaces by extending a peptide chain around a non-canonical amino acid residue anchor. To test our approach using a well characterized model system, we design cyclic peptides that inhibit histone deacetylases 2 and 6 (HDAC2 and HDAC6) with enhanced potency compared to the original anchor (IC50 values of 9.1 and 4.4 nM for the best binders compared to 5.4 and 0.6 µM for the anchor, respectively). The HDAC6 inhibitor is among the most potent reported so far. These results highlight the potential for de novo design of high-affinity protein-peptide interfaces, as well as the challenges that remain.
Peptides are emerging as a promising class of therapeutics with the potential to bind protein surfaces that are difficult to target using small molecules1,2,3,4,5,6,7,8. Cyclic peptides have been of particular interest due to their tunable rigidity, stability, and pharmacokinetics properties4,9. Library-based peptide discovery methods have been used to obtain molecules that bind to protein interfaces with high affinity4,10,11, with considerable progress in terms of library size (currently up to 1014), and ability to incorporate a variety of different amino acids12,13,14,15,16 and cyclization chemistries17,18,19. Due to limitations in synthesis, however, sampling the entirety of the chemical space is rarely possible and these libraries are limited to a subset of amino acids, often guided by the biochemical properties of the protein surface of interest.
Structure-based design of cyclic peptide binders has been more challenging. Most current peptide binder design methods take advantage of one or more co-crystal structures of the target protein with a protein binding partner, and generate binders by stabilizing or scaffolding the interacting structural elements20,21,22,23,24, or mimicking25 or enhancing the binding interface by amino acid substitions26. The requirement for a co-crystal structure with a binding partner limits the application of these methods because for many target proteins no such structure is available. In addition, most protein-protein interactions involve considerable buried surface area; the peptides can only span a portion of this surface and hence generally have diminished binding affinity compared to the original binding partner. Restricting to known binding partners also significantly decreases the range of targetable surfaces.
In this paper we present a general computational approach for de novo design of cyclic peptides that bind to a target protein surface with high affinity. The three-dimensional structure of the target surface is needed for this approach and can be derived from an experimentally determined or computationally predicted protein structure. This method takes advantage of a functional group from a molecule known to bind to the target surface of interest which serves as an anchor, around which a cyclic peptide is built using the generalized kinematic loop closure method in Rosetta software. We generate macrocyclic scaffolds that place this anchor in a binding-competent orientation and enhance its binding to the target by providing additional interactions introduced during computational design. We call this strategy anchor extension.
Choice of target protein and anchor residue
We chose Histone deacetlyase (HDACs) as model targets to test our approach because of the wealth of structural data available for these enzymes, the simplicity of testing binding through enzymatic inhibition, and the relative ease of growing crystals of HDACs which facilitates structural characterization of new designs. We focused our design efforts on HDAC2. In addition to its therapeutic relevance27,28, HDAC2 exemplifies two of the major challenges facing binder design: First, it has a relatively polar surface (Supplementary Fig. 1a), making it a good test system for designing binders for hydrated surfaces. Second, HDAC2 belongs to a protein superfamily with 11 members, many of which share high structural homology29,30 (Fig. 1a, Supplementary Fig. 1b); thus, being able to selectively bind to only HDAC2 present a challenge for computational design of selectivity.
The HDACs are particularly well suited as paradigm systems for the development of our anchor-extension approach. Smaller peptides or peptide-like inhibitors, such as the marine depsipeptide Largazole (Fig. 1b), exhibit a range of affinities and selectivities against various HDAC isozymes. Many of these compounds were originally found in nature and in their unmodified forms bind with IC50 values in the mid-nanomolar range or better, often to class I HDACs, with varying selectivities (Supplementary Table 1)31,32. We sought to determine whether computational methods can achieve similar or better inhibition than these natural products.
To design cyclic-peptide inhibitors of HDAC2, we chose a non-canonical amino acid, 2S-2-amino-7-sulfanylheptanoic acid (SHA), as the anchor. SHA can coordinate to the zinc ion in the active site of HDACs. The choice of SHA was inspired by natural product Largazole (Fig. 1b)33, one of the most potent naturally occurring HDAC inhibitors (1.2 nM for HDAC1, ~3 nM for HDAC2 and HDAC3, and 4.6 nM for HDAC6)34. SHA alone can inhibit class I (HDACs 1,2,3, and 8) and class IIb (HDAC6) HDACs with low micro-molar to high nano-molar affinities (Supplementary Table 2). Different conformations of the SHA anchor were sampled in the HDAC2 pocket using molecular dynamics simulations and served as starting points for design.
Docking pre-existing scaffolds
Our first computational method (design method 1) started with docking structured cyclic-peptide scaffolds onto SHA and re-designing the residues in the interface to improve binding. These scaffolds were selected from two peptides with known structure in the Protein Data Bank (PDB): 3AVL-chain C and 3EOV-chain C, as well as a library of 200 previously generated computationally designed35 structured cyclic-peptides of 7-10 residues length. These peptides were docked onto different conformations of SHA embedded in the HDAC2 active site by rigid body superposition. We selected docked poses without clashes between the macrocycle backbone and HDAC2, and then redesigned the peptide sidechains using Rosetta combinatorial sequence optimization to maximize predicted affinity for the HDAC2. Designs were ranked based on shape complementarity between the peptide and the protein pocket, calculated ∆∆G of binding, and number of contacts between peptide and protein (see Methods for more details). From a library of tens of thousands of designed peptides, 100 with the best interface metrics were selected for energy landscape characterization. Tens of thousands of conformers were generated for each of the 100 peptides, their energies were evaluated, and those designs for which the designed target structure had the lowest energy were selected for downstream analysis. From the previous pool, five peptides with the greatest in silico predicted affinities were tested for HDAC2 inhibition in vitro, the best of which (des1.1.0, Fig. 2a) demonstrated an IC50 value of 289 nM (Fig. 2b, Supplementary Table 2).
The crystal structure of this design in complex with HDAC2 revealed two distinct binding modes and peptide conformations in the three protein chains of the asymmetric unit, suggesting flexibility of the peptide as well as presence of iso-energetic binding conformations (Supplementary Fig. 2a). In two of the protein chains of the asymmetric unit (chains B and C), the peptide conformation was very similar to the design model (Fig. 2c), but the observed binding mode to HDAC2 differed from that of the design model (Fig. 2d). This binding orientation interacts with several water molecules through backbone-mediated hydrogen bonds (Fig. 2e, and Supplementary Fig. 3a). Rosetta-guided mutational scanning successfully stabilized the binding mode observed in the crystal structure (confirmed by structures of variants Lys4→Glu and Pro3→hydroxy-Pro, Supplementary Fig. 2b and Supplementary Figs. 3b–c) but failed to significantly improve affinity or selectivity (Supplementary Tables 2 and 3).
Stabilizing the binding orientation by including water molecules and an additional anchor
Design method 1 highlighted the limitation of using a small (~200) library of pre-designed scaffolds for obtaining high affinity binders: with this small a library, the best fit solutions are not likely to have high shape complementary and make optimal interactions with the target. To circumvent this problem, in design round 2, we built up macrocyclic scaffolds de novo inside the protein pocket to increase shape complementarity between the peptide and the HDAC2 pocket, and to make additional favorable interactions between the peptide backbone atoms and HDAC2. We also incorporated a Trp residue as an additional anchor that lays flat on a hydrophobic surface close to the active site (Fig. 3a), and mimics an aromatic ring observed in the same position in several small molecule inhibitors of HDACs (Supplementary Fig. 4a). Finally, since in the des1.1.0 crystal structure, the peptide interacts with two water molecules at the pocket of HDAC2, also present in a majority of HDAC2 crystal structures (Supplementary Fig. 4b), and displacing such tightly bound water is likely energetically unfavorable36, we decided to explicitly include them in the design calculations and bias backbone sampling to start from conformations that interact with structured waters at the HDAC2 interface (Fig. 3b).
The macrocycle chain was extended from the SHA-Trp dimer, and the conformational space of closed macrocycles harboring these two residues was explored using generalized kinematic loop closure35. Cyclic-peptide backbone and side-chains were optimized for increased predicted binding affinity and for stabilizing the binding competent conformation. As with method 1, out of tens of thousands of generated conformations, around 100 with best interface metrics were selected for conformational sampling analysis. Conformational sampling suggests that peptides designed with this method populate a wide range of conformations in the unbound state (Supplementary Fig. 5), thus we selected five peptides for experimental testing based on their in silico predicted affinities. The best tested peptide, des2.1.0 had an IC50 value of 49.3 nM (Supplementary Table 2), a four-fold improvement over method 1. The other peptides from this method that were tested experimentally had IC50 values in the low micro-molar to high nano-molar range. We hypothesize that the observed lower affinities are due in part to the flexibility of these peptides, suggested by our computational conformational sampling (Supplementary Fig. 5), and the unfavorable loss of conformational entropy upon binding. This lower propensity to sample the designed competent conformation compared to designs from round 1 is potentially due to the constraints imposed by forcing the backbone to interact with water molecules.
To improve the affinity of des2.1.0, we mutated a D-Lys7 residue adjacent to a hydrophobic pocket in des2.1.0 to D-Met. The new des2.1.1 (Fig. 3c) had an improved IC50 value of 16 nM for HDAC2 (Fig. 3d, Supplementary Table 2). The crystal structure of des2.1.1 matches the designed orientation for the two anchor residues, SHA and Trp, with the position of the water molecules retained (Fig. 3e, Supplementary Fig. 3d). While the electron density map for SHA and Trp are well resolved and match the designed model, the rest of the molecule appears to be in a conformation different from the solution structure obtained by NMR (Fig. 3f) and the designed model; however, the electron density is too weak or absent, and the thermal B-factors are too high, for those residues to enable a meaningful comparison. This flexibility is consistent with the observation of multiple states during conformational sampling (Fig. 3g).
Anchor neighborhood sampling and identification of high potency binders
While the above design methodologies result in macrocycles with modest affinities (methods 1 and 2) and correct binding orientation (method 2), these did not achieve selectivity over HDAC6 or IC50 values in low nM range. Inspection of the designed macrocycles in complex with HDAC2 suggested that most lacked sufficient hydrophobic contacts with the target interface to achieve high-affinity binding. The available scaffolds in method 1 and the backbone motif used in method 2 did not facilitate such interactions due to their shape and orientation, and the highly polar nature of HDAC2 pocket.
To overcome this challenge, we focused the anchor extension backbone generation towards making interactions with small hydrophobic patches around the active site (Supplementary Fig. 4c). To do so, we first sampled different possible conformations of SHA in the HDAC2 pocket to generate diversity in binding orientations. Next, the two residues directly adjacent to SHA were extensively sampled to find backbones that promote hydrophobic contacts to the protein surface using two parallel approaches, as described in the next two paragraphs.
In design method 3, we sampled the torsional space of these two residues using a grid-based search over all possible degrees of phi and psi (30˚ grids). After generating a library of backbones, the residue adjacent to SHA at each backbone torsion was mutated to all possible canonical amino acids (L chirality if φ < 0 and D chirality if φ > 0) and the shape complementarity and ∆∆G of binding were calculated for each mutation (Fig. 4a). The best scoring results from the grid-based sampling converged on a small number of residues and torsions, in particular for the residue after SHA (Supplementary Fig. 6). The solutions with best interface metrics were then extended into cyclic peptides by optimizing the torsions and amino acid sequence of the remaining residues as in method 2 through simultaneous backbone sampling and Monte Carlo sequence design to favor binding interactions, including non-canonical amino acids. A list of noncanonical amino acids explored is provided in Supplementary Fig. 7. Except the SHA anchor, all positions were varied during the sidechain assignment due to the substantial backbone movement allowed in these approaches.
In design method 4, we biased backbone generation to favor more hydrophobic contacts by carrying out large-scale stochastic sampling of the two residues directly adjacent to the SHA anchor followed by sequence optimization and energy minimization. In contrast to the grid-based approach in method 3, stochastic sampling joint with minimization and sequence optimization generates lower energy conformations with finer torsional diversity which can increase the likelihood of identifying favorable contacts. The 3mer peptides with best interface metrics were then extended to a final size of 7–9 residues and cyclic backbones were generated by sampling torsional space of these added residues. The peptide sequence was then optimized to improve shape complementarity and calculated ∆∆G of binding between peptide and protein.
The macrocycles generated using design methods 3 and 4 on average had better shape complementarity with the binding pocket compared to those from previous rounds (Supplementary Fig. 8). We sampled around 100,000 peptides from both methods. 100 designs with the best shape complementarity and ∆∆G of binding were selected for downstream conformational sampling analysis, as described before. 13 out of the 22 peptides tested had IC50 values of less than 100 nM (Supplementary Table 4); the best binders had similar sequences (Supplementary Table 2) and were all from design round 3. Further mutations around this sequence to enhance interactions to HDAC2 or stabilize the designed binding conformation did not improve experimental binding affinity (Supplementary Table 5). The best binder, des3.3.0 (Fig. 4b, c) had an IC50 value of 9.1 nM for HDAC2 (Fig. 4d, Supplementary Table 2). One of the peptides, des3.3.2, achieved 3-fold selectivity over HDAC6, an order of magnitude improvement in selectivity over the original SHA anchor (Supplementary Table 2). Designs from round 4 had moderate potency for HDAC2, similar to round 1 designs (Supplementary Table 2). However, they all showed selectivity for HDAC6.
Efforts to crystalize des3.3.0 were not successful. However, we obtained a crystal structure of des4.3.1 (Fig. 4e) with zebrafish (Danio rerio) HDAC6 at 1.7 Å resolution (Supplementary Fig. 3e). This peptide inhibits human HDAC6 with an IC50 value of 17.1 nM (Fig. 4f), 88-fold more potently than HDAC2. The binding orientation of the peptide is similar to the design model, but the structure of the peptide is very different (Fig. 4g). In particular, d-Arg8 occupies the negative phi region of the Ramachandran map (φ = 166° in the design and -46° in the crystal structure). If the d-Arg is replaced by l-Arg during conformational sampling, the lowest energy structures are very close to the crystal structure (Supplementary Fig. 9). The newly adopted conformation is complementary in shape to the contour of the active site (Fig. 4h, Supplementary Fig. 3e) and stabilized by several backbone-backbone hydrogen bonds and n → π* interactions37. The peptide also forms both direct and water-mediated hydrogen bonding interactions with residues in the outer active site cleft of HDAC6 (Fig. 4h, Supplementary Fig. 3e). Notably Ser531 of HDAC6 donates a hydrogen bond to the carboxylate group of Asp7 and accepts a hydrogen bond from the backbone amide of SHA; Ser531 similarly accepts a hydrogen bond from the backbone amide of bound acetyl-lysine HDAC substrates38. Mutation of Asp7 to Ala did not result in a significant change in IC50 for HDAC6 or HDAC2 (Supplementary Table 6), while mutation of D-Arg8 → D-Ser raised the IC50 10-fold, suggesting an essential role for this residue (Supplementary Table 6), possibly due to its complementarity to the negative electrostatic surface potential of HDAC6 in this region (Supplementary Fig. 10). HDAC6 was not the target in the computational design calculations, and it is unclear whether the binding mode of the peptide to HDAC2 would be similar or different from that observed in the HDAC6 structure.
Insights from crystal structures
The cyclic-peptides in this study are among the largest active site-targeted ligands that have been co-crystallized with any HDAC to date. Previously studied HDAC-cyclic peptide complexes include HDAC8 complexes with Largazole and Trapoxin A, and the HDAC6 complex with HC Toxin, each a tetrapeptide that interacts with specificity determinants in the enzyme active site33,38,39.
In all the crystal structures we obtained, the thiol functional group of SHA coordinates the catalytic Zn2+ ion with a Zn2+– S separation of 2.3 Å in a distorted tetrahedral geometry reminiscent of that observed for the inhibitor Largazole (Supplementary Fig. 3)33. Binding of these peptides is enhanced by additional interactions to HDAC. Some of these interactions are observed in the crystal structure of shorter tetrapetides, but there are also additional interactions due to the larger size of our designed peptides. For example, Ser531 in the HDAC6 active site accepts a hydrogen bond from the backbone NH group of the zinc-bound epoxyketone residue of HC Toxin, just as Ser531 accepts a hydrogen bond from the backbone NH group of substrate acetyllysine38. Similarly, Ser531 accepts a hydrogen bond from the backbone NH group of the zinc-bound anchor residue SHA; but in addition it forms water-mediated hydrogen bond interactions with main chain or side chain atoms at the mouth of the active site (Supplementary Fig. 3).
The crystal structure of HDAC1 complexed with a linear heptapeptide has been reported at 3.3 Å resolution, but solvent molecules are not modeled at this low resolution40. Our high-resolution crystal structures of HDAC2 and HDAC6 complexed with the large designed peptide ligands provide detailed clues regarding how these enzymes can interact with their protein substrates through direct and water-mediated hydrogen bond interactions.
Out of 5 HDAC2:cyclic-peptide crystal structures obtained, three had the same binding orientation and engaged the same residues at the protein-peptide interface as designed. In the des1.1.0:HDAC2 co-crystal structure, the dominant binding mode in the crystal (chains B and C) has considerably better predicted affinity than the original design model with the same peptide structure (Supplementary Table 7, Fig. 5a). Thus, the lack of structure recapitulation in this case was due to insufficient sampling—our original design calculations were not extensive enough to identify this lower energy alternative state. We found that a large-scale parallel docking algorithm which allows movements of side-chains and backbone of the peptide and nearby protein residues can reproduce the overall peptide behavior in the binding pocket for this design (Fig. 5b). While encouraging, the resolution of this docking method is not high enough to capture the exact binding orientation and is computationally very expensive; these are clear areas for improvement.
Discrepancies between designed and experimental binding mode have been observed in other peptide- and protein-binder design studies41,42, and are likely in part responsible for the limited binding affinities obtained using current computational methods42,43.
Our anchor extension protocol shows promise for the de novo design of cyclic peptides capable of binding with nanomolar affinity to a protein surface of choice. The iteratively improved computational design protocols yielded HDAC2 and HDAC6 binders with affinities on par with many of the most potent inhibitors44,45. Our calculations include all 20 amino acids, their chiral variants and approximately 20 non-canonical amino acids (Supplementary Fig. 7) (a total of >1013 possibilities), and the high affinity peptide ligands described here were obtained by testing fewer than 50 peptides in vitro. These results indicate the power of the computational methods in narrowing down the space of potential peptide sequences to test experimentally. The correct orientation of SHA anchor in all crystal structures obtained in this study and the enhanced affinity of nearly all our tested peptides compared to this anchor further validates our approach. Out of 39 tested peptides (Supplementary Table 4), 30 have IC50 values better than 1 µM, and 17 have IC50 values of 100 nM or better (Fig. 5c, Supplementary Tables 2 and 4). Although selectivity is an important area for future work, des4.2.0, which is one of the most potent HDAC6 inhibitors reported (small molecule- or peptide-based, Supplementary Tables 1 and 8), shows that this class of molecules can be selective.
Our results also highlight remaining challenges for accurate and robust computational design of cyclic-peptide binders. In our previous work focused on ordered macrocycle design35, the design calculations were entirely focused on maximizing the accuracy and stability of the monomeric designed structures. The additional requirement of harboring a high-affinity binding site constrains both the sequence and the structure of parts of the macrocycle and makes precise control over structure more challenging, and hence the designed structures were not always at the global free energy minima for the designed sequence (Fig. 5d); the constraints associated with incorporation of binding functionality reduce control over structure. This conformational flexibility also adds to the entropic cost of binding, a potential contributor to reduced affinity and lack of selectivity46,47,48,49.
One solution for this problem is to sample a still larger number of possible macrocyclic conformations to identify those that satisfy both binding and structural criteria. Incorporating non-canonical amino acids with strong torsional preferences and cross-linking chemistries could help stabilize the designed binding conformation, compensating for the fact that a subset of residues must be optimized for binding rather than for folding to the desired structure. Faster and more accurate algorithms for computational sampling and energy evaluation to screen possible binding orientations will be important for confirming that the designed binding mode is indeed the lowest energy state. Taking into account the conformational ensemble of peptides (sampled using Rosetta35 or MD-based methods50,51) when calculating binding rather than one single conformation could also be useful. Accurate energy calculations will likely have to consider structured water molecules36,52,53,54 and flexibility of loops around the pocket55,56,57 (reported previously for HDACs58, also observed in our MD simulations, Supplementary Fig. 11). With improvements in both sampling methods and energy evaluation, and incorporation of a negative design strategy to increase within family selectivity, our anchor extension approach should enable the computational design of de novo peptides that can target “undruggable” surfaces with high affinity and selectivity.
Preparation of proteins
HDAC2 protein was obtained from PDB ID 5IWG ligated with BRD4884. Chain A of the protein was used as the HDAC2 template. All cofactors and water molecules were removed except the Zinc ion in the active site. The protein was then relaxed using the command below:
<path-to-Rosetta > /main/bin/relax.default.linuxgccrelease -relax:constrain_relax_to_start_coords -relax:coord_constrain_sidechains -relax:ramp_constraints false -score:weights ref2015.wts -ex1 -ex2 -use_input_sc -flip_HNQ -no_optH false -auto_setup_metals true -s <input_pdb>
For structure with water motif, used in design method 2, we added the flag -ignore_waters false.
SHA parameterization and conformational sampling
The SHA anchor by examining the x-ray crystal structure of Largazole bound to HDAC8 (PDB ID 3RQD). Since Fmoc-protected amino acid building-blocks with alkane side-chains of this sort were much more readily available from commercial suppliers than were the equivalent building blocks with the double bond intact, we decided to omit the double bond. To allow SHA to be modeled in Rosetta, we built the SHA anchor with L-chirality using the Avogadro software, appending N-acetyl and C-methylamide groups to emulate the context of a longer peptide. We energy-minimized the structure with the MMFF94 molecular mechanics force field, removed N- and C-capping groups, and converted the structure to Rosetta’s params file format using the molfile_to_params.py script included with the software. We used the lysine main-chain potential for energetic calculations within Rosetta. Different conformations of SHA in HDAC2 pocket were sampled using molecular dynamics simulations with AMBER force field.
Peptide backbone generation
The first step in design is to generate the peptide in the pocket. For design method 1, a library of computational and few natural cyclic-peptides were docked onto different conformations of SHA anchor. The docking was performed using a python script that simply transforms the C, N, O, CA, and CB atoms of each peptide residue onto the corresponding atoms in SHA. This method is provided in supplementary data file 1, Method1 folder. The docked conformations were then relaxed using Rosetta FastRelax and those with minimal clashes were further carried out for design.
For design methods 2 the peptide chain was extended using PeptideStubMover and then closed conformations were sampled using GeneralizedKIC mover in Rosetta. The scripts are provided in supplementary data file 1.
For design methods 3 and 4, residues on two ends of SHA were sampled using a pyrosetta script provided in supplementary data file 1. The results were analyzed using python pandas and residues and orientations that had the best interface metrics (high shape complementarity and low ∆∆G) were selected for extension. A pyrosetta wrapper for GeneralizedKIC mover was developed in order to facilitate sampling different peptide sizes.
Peptide design and selection
Extended peptides were then designed using Rosetta’s FastDesign mover59. The details of design were slightly different for different methods; details of each script is provided in the supplementary data file 1. The designed peptides were then filtered based on their total Rosetta score, shape complementarity, ∆∆G of binding, and contacts at interface. The analysis was performed using python pandas. For each design method, the designs in the top 1% of all these metrics were chosen for further analysis (approximately 100 designs in a total pool of 50,000-100,000). The threshold for each metric depended on the distribution of scores for each method. However, we employed a hard cut-off of shape complementarity >0.65 and calculated ∆∆G without repacking < −10 for all the designs.
Selected designed models were then visually inspected and those with minimum number of buried unsatisfied hydrogen bond donors and acceptors were selected for computational conformational sampling, or folding analysis. The folding analysis was performed using simple_cycpep_predict app in Rosetta as described before35. Below you may find a command to run such analysis:
<path_to_rosetta_binary > /simple_cycpep_predict.default.linuxgccrelease \
-nstruct 10000 \
-cyclic_peptide:sequence_file seq.txt \
-in:file:native native.pdb \
-out:file:silent output.silent \
-cyclic_peptide:genkic_closure_attempts 250 \
-cyclic_peptide:genkic_min_solution_count 1 \
-score:symmetric_gly_tables true \
-cyclic_peptide:default_rama_sampling_table flat_symm_pro_ramatable \
-cyclic_peptide:use_rama_filter true \
-cyclic_peptide:rama_cutoff 3.0 \
-cyclic_peptide:min_genkic_hbonds 2 \
-cyclic_peptide:min_final_hbonds 2 \
-mute all \
Where seq.txt is the 3-Letter amino acid sequence of the peptide separated by space and native.pdb is the designed conformation.
Peptides with better folding metrics (those that sampled near the binding conformation) were then selected based on score vs rmsd plot and moved forward for synthesis. Due to difficulties in finding peptides that sampled near the binding conformation in method 2, we selected peptides based on their interface metrics.
Parallel docking was performed using the pyrosetta.distributed suite and Dask parallel computing60, using the environment settings provided in extended data. Details of running the docking and analysis are provided in a Jupyter notebook.
Visualization and figures were generated using the PyMOL Molecular Graphics System, Version 2.3.0 Schrödinger, LLC. The electrostatic surface potentials were generated using APBS PyMol plugin with default settings61.
Peptide synthesis and purification
SHA was synthesized by Wuxi AppTech. All peptides were synthesized using standard Fmoc solid phase peptide synthesis protocols using a CEM Liberty Blue peptide synthesizer with microwave-assisted coupling and deprotection steps. Peptides containing a l-aspartate or l-glutamate were synthesized on a preloaded Fmoc-L-Asp(Wang resin LL)-ODmab or Fmoc-L-Glu(Wang resin LL)-ODmab resin, where the acidic side-chain of the amino acid is tethered to the resin, and were cyclized on-bead by a standard coupling reaction following deprotection of the C-terminal -ODmab protecting group with 2% (v/v) hydrazine monohydrate in dimethylformamide (DMF). All other peptides were synthesized with the C-terminus tethered to Cl-TCP(Cl) ProTide resin from CEM, cleaved from the resin with 1% (v/v) TFA in dichloromethane (DCM), and cyclized by a solution-phase coupling reaction prior to the final total deprotection. Crude peptides were purified based on mass via reverse phase HPLC using a Waters AutoPurify HPLC/MS system in line with a SQD2 mass spectrometer. Peptides were typically purified via a water (0.1% formic acid) and acetonitrile (0.085% formic acid) gradient at 2%/min on an XBridge Prep C18 10 um, 19 × 150 mm column. Masses and purities were assessed via electrospray ionization mass spectrometry during and subsequent to purification on an SQD2 mass spectrometer. Due to epimerization during cyclization, for some peptides two major peaks with correct mass was obtained. For such peptides, both peaks were collected and tested. LC/MS data for the peptides for which HDAC inhibition assays were performed are shown in Supplementary Fig. 12. Source Data are provided as Supplementary Data 2. Sequences of all peptides tested are provided in the Supplementary Data file 2.
HDAC inhibition assay
Initial IC50 values were estimated using HDAC fluorogenic assay kits from BPS Biosciences (HDAC2, HDAC4, and HDAC6) following the protocol described in the kit. All the measures were performed in duplicates or triplicates. These measurements were done either on full range of concentrations (1:10 dilution from 1 µM to 100 pM) or on two concentrations only (20 nM and 200 nM) as an estimate of the range. At this stage, the IC50 value of the peptide was roughly estimated (reported in Supplementary Table 4) and on the promising hits, full IC50 measurements for HDACs were performed by Reaction Biology Corporations as described below (Values reported in Supplementary Tables 2 and 4). Since no binding was observed to HDAC4, we did not perform full assay on HDAC4. Similarly, because no binding to HDACs 5,7,9,11 was observed for our SHA anchor, further binding analysis for these HDACs was not performed. Source Data are provided as a Source Data file.
The assay was performed using 50 μM fluorogenic peptide from p53 residues 379-382 [RHKK(Ac)AMC] in a base reaction buffer of 50 mM Tris-HCl at pH 8.0, 137 mM NaCl, 2.7 mM KCl, 1 mM MgCl2, and freshly added 1 mg/ml BSA and 1% DMSO. Peptides were first dissolved in DMSO and then added to the reaction mixture with the enzyme using acoustic technique, enough to reach the desired concentration for that assay point. Peptide concentrations were calculated based on mass of lyophilized peptide and its molecular weight. The substrate was then added and incubated for 1 hour at 30 °C in a sealed container. After the incubation, developer was added to stop the reaction and develop color. Kinetic measurements were then performed for 20 min with Envision with 5 min intervals (Ex/Em = 360/460 nm). The endpoint after plateau was taken for IC50 measurement. To calculate IC50, the % activity data are fit to the following equation in GraphPad Prism (Eq. 1).
where bottom is constrained to equal 0, and Top is constrained to be less than 120.
In cases where duplicate measures are used, average data is reported in the main text or Supplementary Tables.
We used a Bruker (Billerica, MA) AVANCE III-800 NMR spectrometer that was equipped with a cryo-probehead to collect NMR spectra. Peptide concentrations of around 1.8 mM were used for collecting 1D and 2D 1H NMR spectra. The lyophilized peptides were dissolved in 90% H2O:10% D2O solutions. To collect Total correlated spectroscopy (TOCSY) spectra, we used a mixing time of 120 ms applied with Bruker’s mlevesgpph pulse sequence. A 250 ms mixing time using Bruker’s noesyesgpph pulse sequence was used to collect 2D 1H−1H nuclear Overhauser effect spectroscopy (NOESY) spectra. The TOCSY and NOESY peaks were assigned using the Sparky NMR package. NMR data are available in Supplementary Table 9 and Supplementary Fig. 13.
Protein purification and crystallization
Protein of human HDAC2 was produced following the procedure described in Bressi et al.62. The full length, C-terminally His-tagged protein is expressed in insect cells and purified by affinity and size exclusion chromatography. After initial purification, a C-terminally truncated sample is generated by treatment with trypsin for 1 h at 25 °C. The addition of 1 mM PMSF is used to terminate the reaction, followed by a final purification by gel filtration chromatography and concentration to 12 mg/ml.
For crystallization of HDAC2, a 12 mg/ml protein sample was incubated with 1 mM tool compound (SHA) on ice for 1 hour. Experiments were conducted utilizing Takeda California’s automated nanovolume crystallization platform, in which 50 nl of protein solution was mixed with an equal volume of reservoir solution containing 40% (v/v) PEG600 and 100 mM CHES (pH 9.5). The preformed HDAC2 crystals were used in subsequent soaking experiments by incubation for 48 hours in a stabilizing solution containing 10 mM of synthetic peptide. Crystals were subsequently harvested in a cryo-loop and frozen directly in liquid nitrogen.
HDAC6 catalytic domain 2 from Danio rerio (zebrafish; henceforth designated simply as “HDAC6”), as encoded in the His6-MBP-TEV-HDAC6-pET28a(+) vector, was recombinantly expressed in Escherichia coli BL21(DE3) cells and purified as described63. The HDAC6–design4.3.1 complex was cocrystallized using the sitting drop vapor diffusion method at 4 °C. Briefly, a 100 nL drop of protein solution [10 mg/mL HDAC6, 5 0 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) (pH 7.5), 100 mM KCl, 5% glycerol (v/v), 1 mM tris(2-carboxyethyl)phosphine (TCEP), and 2 mM design4.3.1 was combined with a 100 nL drop of precipitant solution [0.2 M ammonium chloride and 20% polyethylene glycol (PEG) 3350 (w/v)] and equilibrated against 80 μL of precipitant solution in the crystallization well reservoir. Rod-shaped crystals appeared within 4 days. Ethylene glycol (30% v/v) was added to the drop prior to crystal harvesting and flash cooling for data collection.
Data collection from crystals of HDAC2 complexes was performed with synchrotron radiation at both the Advanced Light Source (ALS) BL-5.0.3, and the Advanced Photon Source (APS), 21ID-F. All crystals belonged to space group P212121 with cell dimensions closely related to the following, a = 92.20 Å, b = 97.0 Å and c = 139.1 Å, α = β = γ = 90°. X-ray intensities and data reduction were evaluated by using the HKL2000 package64.
HDAC6 X-ray diffraction data were collected at the Highly Automated Macromolecular Crystallography (AMX) beamline 17-ID-1 at the National Synchrotron Light Source II, Brookhaven National Laboratory (Upton, NY). Crystals of the HDAC6–design4.3.1 complex diffracted X-rays to 1.7 Å resolution. Data were indexed and integrated using iMosflm65 and scaled using Aimless66 in the CCP4 program suite67.
Crystal structures of HDAC2 complexes were determined by molecular replacement using PDB 4LXZ as an initial search model with Phaser in the CCP4 Suite67. Model building and refinements were carried out using Phenix68 and COOT69 and models were manually corrected. After building the initial model, the peptide and solvent molecules were added. Phenix.refine was used for the final. Assessment and analysis of stereochemical parameters of the final model was done with Molprobity70. Data collection and refinement statistics are listed in Supplementary Table 10.
For the HDAC6–design4.3.1 complex, the initial electron density map was phased by molecular replacement using the program Phaser;71 the atomic coordinates of unliganded HDAC6 (PDB 5EEM38) were used as a search model for rotation and translation function calculations. The interactive graphics program Coot69 was used to build and manipulate the atomic model of the HDAC6–design4.3.1 complex, and refinement was performed using Phenix68. The atomic coordinates of design4.3.1 were built into the electron density map during the later stages of refinement. The final model was evaluated using MolProbity72. All data collection and refinement statistics are recorded in Supplementary Table 10.
Molecular Dynamics simulations of proteins HDAC10, HDAC3, HDAC6 and HDAC8 were performed using the Amber99SB-ILDN forcefield73 with GROMACS 2016.174. Each protein was solvated in a dodecahedron box of explicit TIP3P75 water and neutralized with sodium ions. Each solvated and neutralized system was energy-minimized by steepest descent minimization. Equilibration of each system was performed for 1 ns under the NPT ensemble, where the pressure was coupled with the Berendsen barostat76 to 1 atm, and the temperature was set to 310 K using the velocity-rescaling thermostat77. During the equilibration, position restraints (force of 1000 kJ mol-1 nm-1) were applied to heavy atoms. After equilibration, for each protein, 5 simulations of 100 ns were performed in the NVT ensemble, with periodic boundary conditions. A 10 Å cutoff was used for van der Waals and short-range electrostatic interactions. The Particle-Mesh Ewald (PME) summation method was used for long-range electrostatic interactions78. Verlet cut-off scheme was used79. Covalent bonds were constrained using the LINCS algorithm80. The integration time-step was 2 fs.
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
All the structures presented here are deposited in PDB with accession codes 6WHN, 6WHO, 6WHQ, 6WHZ, 6WI3, 6JSW. The raw data for HDAC inhibition assays (presented in Figs. 2–5 and Supplementary Table 2) are available as a supplementary data file. All relevant data are available from the authors upon request. Source data are provided with this paper.
Conformational sampling was done with the Rosetta simple_cycpep_predict application and peptide design was carried out with the rosetta_scripts application, both of which are included in the Rosetta software suite. The Rosetta software suite is available free of charge to academic users and can be downloaded from http://www.rosettacommons.org. Instructions and inputs for running these applications, and all other data and coding necessary to support the results and conclusion are provided in extended data files 1. Additionally, the code used for design and instructions on how to run can be found in Peptide_HDACBinders folder in our github repository (https://github.com/ParisaH-Lab/publications.git).
Lau, J. L. & Dunn, M. K. Therapeutic peptides: historical perspectives, current development trends, and future directions. Bioorg. Med. Chem. 26, 2700–2707 (2018).
Henninot, A., Collins, J. C. & Nuss, J. M. The current state of peptide drug discovery: back to the future? J. Med. Chem. 61, 1382–1414 (2018).
Reichart, F. et al. Selective targeting of integrin αvβ8 by a highly active cyclic peptide. J. Med. Chem. 62, 2024–2037 (2019).
Vinogradov, A. A., Yin, Y. & Suga, H. Macrocyclic peptides as drug candidates: recent progress and remaining challenges. J. Am. Chem. Soc. 141, 4167–4181 (2019).
Touti, F., Gates, Z. P., Bandyopadhyay, A., Lautrette, G. & Pentelute, B. L. In-solution enrichment identifies peptide inhibitors of protein–protein interactions. Nat. Chem. Biol. 15, 410–418 (2019).
Wuo, M. G. & Arora, P. S. Engineered protein scaffolds as leads for synthetic inhibitors of protein–protein interactions. Curr. Opin. Chem. Biol. 44, 16–22 (2018).
Chan, L. Y., Craik, D. J. & Daly, N. L. Dual-targeting anti-angiogenic cyclic peptides as potential drug leads for cancer therapy. Sci. Rep. 6, 35347 (2016).
Rhodes, C. A. et al. Cell-permeable bicyclic peptidyl inhibitors against NEMO-IκB kinase interaction directly from a combinatorial library. J. Am. Chem. Soc. 140, 12102–12110 (2018).
Zorzi, A., Deyle, K. & Heinis, C. Cyclic peptide therapeutics: past, present and future. Curr. Opin. Chem. Biol. 38, 24–29 (2017).
Liu, R., Li, X., Xiao, W. & Lam, K. S. Tumor-targeting peptides from combinatorial libraries. Adv. Drug Deliv. Rev. 110–111, 13–37 (2017).
Ashby, M., Petkova, A., Gani, J., Mikut, R. & Hilpert, K. Use of peptide libraries for identification and optimization of novel antimicrobial peptides. Curr. Top. Med. Chem. 17, 537–553 (2017).
Passioura, T., Liu, W., Dunkelmann, D., Higuchi, T. & Suga, H. Display selection of exotic macrocyclic peptides expressed under a radically reprogrammed 23 amino acid genetic code. J. Am. Chem. Soc. 140, 11551–11555 (2018).
Kawakami, T. & Murakami, H. Genetically encoded libraries of nonstandard peptides. J. Nucleic Acids 2012, 1–15 (2012).
Kawamura, A. et al. Highly selective inhibition of histone demethylases by de novo macrocyclic peptides. Nat. Commun. 8, 14773 (2017).
Kawakami, T., Murakami, H. & Suga, H. Messenger RNA-programmed incorporation of multiple N-methyl-amino acids into linear and cyclic peptides. Chem. Biol. 15, 32–42 (2008).
Huang, Y., Wiedmann, M. M. & Suga, H. RNA display methods for the discovery of bioactive macrocycles. Chem. Rev. 119, 10360–10391 (2019).
Gless, B. H. & Olsen, C. A. Direct peptide cyclization and one-pot modification using the MeDbz linker. J. Org. Chem. 83, 10525–10534 (2018).
Mudd, G. E. et al. Identification and optimization of EphA2-selective bicycles for the delivery of cytotoxic payloads. J. Med. Chem. 63, 4107–4116 (2020).
Jafari, M. R. et al. Discovery of light-responsive ligands through screening of a light-responsive genetically encoded library. ACS Chem. Biol. 9, 443–450 (2014).
Guéret, S. M. et al. Macrocyclic modalities combining peptide epitopes and natural product fragments. J. Am. Chem. Soc. 142, 4904–4915 (2020).
Siegert, T. R., Bird, M. J., Makwana, K. M. & Kritzer, J. A. Analysis of loops that mediate protein–protein interactions and translation into submicromolar inhibitors. J. Am. Chem. Soc. 138, 12876–12884 (2016).
Sedan, Y., Marcu, O., Lyskov, S. & Schueler-Furman, O. Peptiderive server: derive peptide inhibitors from protein-protein interactions. Nucleic Acids Res 44, W536–W541 (2016).
Pelay-Gimeno, M., Glas, A., Koch, O. & Grossmann, T. N. Structure-based design of inhibitors of protein-protein interactions: mimicking peptide binding epitopes. Angew. Chem. Int. Ed. 54, 8896–8927 (2015).
Satoh, T. et al. Bioactive peptide design based on protein surface epitopes: a cyclic heptapeptide mimics CD4 domain 1 CC′ loop and inhibits CD4 biological function. J. Biol. Chem. 272, 12175–12180 (1997).
Kadam, R. U. et al. Potent peptidic fusion inhibitors of influenza virus. Science 358, 496–502 (2017).
Rooklin, D. et al. Targeting unoccupied surfaces on protein–protein interfaces. J. Am. Chem. Soc. 139, 15560–15563 (2017).
Damaskos, C. et al. Histone deacetylase inhibitors: an attractive therapeutic strategy against breast cancer. Anticancer Res 37, 35–46 (2017).
Li, Y. & Seto, E. HDACs and HDAC inhibitors in cancer development and therapy. Cold Spring Harb. Perspect. Med. 6, a026831 (2016).
Haberland, M., Montgomery, R. L. & Olson, E. N. The many roles of histone deacetylases in development and physiology: implications for disease and therapy. Nat. Rev. Genet. 10, 32–42 (2009).
Lombardi, P. M., Cole, K. E., Dowling, D. P. & Christianson, D. W. Structure, mechanism, and inhibition of histone deacetylases and related metalloenzymes. Curr. Opin. Struct. Biol. 21, 735–743 (2011).
Kim, B. & Hong, J. An overview of naturally occurring histone deacetylase inhibitors. Curr. Top. Med. Chem. 14, 2759–2782 (2015).
Salvador, L. A. & Luesch, H. Discovery and mechanism of natural products as modulators of histone acetylation. Curr. Drug Targets 13, 1029–1047 (2012).
Cole, K. E., Dowling, D. P., Boone, M. A., Phillips, A. J. & Christianson, D. W. Structural basis of the antiproliferative activity of largazole, a depsipeptide inhibitor of the histone deacetylases. J. Am. Chem. Soc. 133, 12474–12477 (2011).
Bowers, A. A. et al. Synthesis and histone deacetylase inhibitory activity of largazole analogs: alteration of the zinc-binding domain and macrocyclic scaffold. Org. Lett. 11, 1301–1304 (2009).
Hosseinzadeh, P. et al. Comprehensive computational design of ordered peptide macrocycles. Science 358, 1461–1466 (2017).
Ladbury, J. E. Just add water! The effect of water on the specificity of protein-ligand binding sites and its potential application to drug design. Chem. Biol. 3, 973–980 (1996).
Bartlett, G. J., Choudhary, A., Raines, R. T. & Woolfson, D. N. n→π* interactions in proteins. Nat. Chem. Biol. 6, 615–620 (2010).
Hai, Y. & Christianson, D. W. Histone deacetylase 6 structure and molecular basis of catalysis and inhibition. Nat. Chem. Biol. 12, 741–747 (2016).
Porter, N. J. & Christianson, D. W. Binding of the microbial cyclic tetrapeptide trapoxin A to the class I histone deacetylase HDAC8. ACS Chem. Biol. 12, 2281–2286 (2017).
Watson, P. J. et al. Insights into the activation mechanism of class I HDAC complexes by inositol phosphates. Nat. Commun. 7, 11262 (2016).
Procko, E. et al. Computational design of a protein-based enzyme inhibitor. J. Mol. Biol. 425, 3563–3575 (2013).
Mulligan, V. K. et al. Computationally-designed peptide macrocycle inhibitors of New Delhi metallo-β-lactamase 1. Proc. Natl Acad. Sci. 118, 12 (2021).
Guardiola, S. et al. Target-templated de novo design of macrocyclic d-/l-peptides: discovery of drug-like inhibitors of PD-1. Chem. Sci. (2021) https://doi.org/10.1039/D1SC01031J.
Eckschlager, T., Plch, J., Stiborova, M. & Hrabeta, J. Histone deacetylase inhibitors as anticancer drugs. Int. J. Mol. Sci. 18, 1414 (2017).
Kim, H.-J. & Bae, S.-C. Histone deacetylase inhibitors: molecular mechanisms of action and clinical trials as anti-cancer drugs. Am. J. Transl. Res. 3, 166–179 (2011).
Patgiri, A., Jochim, A. L. & Arora, P. S. A hydrogen bond surrogate approach for stabilization of short peptide sequences in α-helical conformation. Acc. Chem. Res. 41, 1289–1300 (2008).
DeLorbe, J. E. et al. Thermodynamic and structural effects of conformational constraints in protein−ligand interactions. Entropic paradoxy associated with ligand preorganization. J. Am. Chem. Soc. 131, 16758–16770 (2009).
Lokesh, G. L., Muralidhara, B. K., Negi, S. S. & Natarajan, A. Thermodynamics of phosphopeptide tethering to BRCT: the structural minima for inhibitor design. J. Am. Chem. Soc. 129, 10658–10659 (2007).
Wallraven, K. et al. Adapting free energy perturbation simulations for large macrocyclic ligands: how to dissect contributions from direct binding and free ligand flexibility. Chem. Sci. 11, 2269–2276 (2020).
Kamenik, A. S., Lessel, U., Fuchs, J. E., Fox, T. & Liedl, K. R. Peptidic macrocycles - conformational sampling and thermodynamic characterization. J. Chem. Inf. Model. 58, 982–992 (2018).
Yan, Y., Zhang, D. & Huang, S.-Y. Efficient conformational ensemble generation of protein-bound peptides. J. Cheminformatics 9, 59 (2017).
London, N., Movshovitz-Attias, D. & Schueler-Furman, O. The structural basis of peptide-protein binding strategies. Struct. Lond. Engl. 18, 188–199 (2010). 1993.
Ahmed, M. H. et al. Bound water at protein-protein Interfaces: partners, roles and hydrophobic bubbles as a conserved motif. PLoS ONE 6, e24712 (2011).
Malde, A. K., Hill, T. A., Iyer, A. & Fairlie, D. P. Crystal structures of protein-bound cyclic peptides. Chem. Rev. 119, 9861–9914 (2019).
Dagliyan, O., Proctor, E. A., D’Auria, K. M., Ding, F. & Dokholyan, N. V. Structural and dynamic determinants of protein-peptide recognition. Struct. Lond. Engl. 19, 1837–1845 (2011). 1993.
Antes, I. DynaDock: a new molecular dynamics-based algorithm for protein-peptide docking including receptor flexibility. Proteins Struct. Funct. Bioinforma. 78, 1084–1104 (2010).
Alogheli, H., Olanders, G., Schaal, W., Brandt, P. & Karlén, A. Docking of macrocycles: comparing rigid and flexible docking in glide. J. Chem. Inf. Model. 57, 190–202 (2017).
Wang, D. Computational studies on the histone deacetylases and the design of selective histone deacetylase inhibitors. Curr. Top. Med. Chem. 9, 241–256 (2009).
Bhardwaj, G. et al. Accurate de novo design of hyperstable constrained peptides. Nature 538, 329–335 (2016).
Ford, A. S., Weitzner, B. D. & Bahl, C. D. Integration of the Rosetta suite with the python software stack via reproducible packaging and core programming interfaces for distributed simulation. Protein Sci. 29, 43–51 (2020).
Jurrus, E. et al. Improvements to the APBS biomolecular solvation software suite: Improvements to the APBS Software Suite. Protein Sci. 27, 112–128 (2018).
Bressi, J. C. et al. Exploration of the HDAC2 foot pocket: Synthesis and SAR of substituted N-(2-aminophenyl)benzamides. Bioorg. Med. Chem. Lett. 20, 3142–3145 (2010).
Osko, J. D. & Christianson, D. W. Methods for the expression, purification, and crystallization of histone deacetylase 6–inhibitor complexes. Methods Enzymol. 626, 447–474 (2019). https://doi.org/10.1016/bs.mie.2019.06.028
Otwinowski, Z. & Minor, W. Processing of X-ray diffraction data collected in oscillation mode. Methods Enzymol. 276, 307–326 (1997).
Battye, T. G. G., Kontogiannis, L., Johnson, O., Powell, H. R. & Leslie, A. G. W. iMOSFLM: a new graphical interface for diffraction-image processing with MOSFLM. Acta Crystallogr. D. Biol. Crystallogr. 67, 271–281 (2011).
Evans, P. R. & Murshudov, G. N. How good are my data and what is the resolution?. Acta Crystallogr. D. Biol. Crystallogr. 69, 1204–1214 (2013).
Winn, M. D. et al. Overview of the CCP 4 suite and current developments. Acta Crystallogr. D. Biol. Crystallogr. 67, 235–242 (2011).
Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr. D. Biol. Crystallogr. 66, 213–221 (2010).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D. Biol. Crystallogr 66, 486–501 (2010).
Williams, C. J. et al. MolProbity: more and better reference data for improved all-atom structure validation. Protein Sci. 27, 293–315 (2018).
McCoy, A. J. et al. Phaser crystallographic software. J. Appl. Crystallogr. 40, 658–674 (2007).
Chen, V. B. et al. MolProbity: all-atom structure validation for macromolecular crystallography. Acta Crystallogr. D. Biol. Crystallogr. 66, 12–21 (2010).
Lindorff-Larsen, K. et al. Improved side-chain torsion potentials for the Amber ff99SB protein force field: improved protein side-chain potentials. Proteins Struct. Funct. Bioinforma. 78, 1950–1958 (2010).
Abraham, M. J. et al. GROMACS: High performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1–2, 19–25 (2015).
Leszczynski, J. & K. Shukla, M. K. Practical Aspects of Computational Chemistry. (Springer, 2009).
Berendsen, H. J. C., Postma, J. P. M., van Gunsteren, W. F., DiNola, A. & Haak, J. R. Molecular dynamics with coupling to an external bath. J. Chem. Phys. 81, 3684–3690 (1984).
Bussi, G., Donadio, D. & Parrinello, M. Canonical sampling through velocity rescaling. J. Chem. Phys. 126, 014101 (2007).
Essmann, U. et al. A smooth particle mesh Ewald method. J. Chem. Phys. 103, 8577–8593 (1995).
Páll, S. & Hess, B. A flexible algorithm for calculating pair interactions on SIMD architectures. Comput. Phys. Commun. 184, 2641–2650 (2013).
Hess, B., Bekker, H., Berendsen, H. J. C. & Fraaijie, J. G. E. M. LINCS: a linear constraint solver for molecular simulations. J. Comput. Chem. 18, 1463–1472 (1997).
This work was supported by ADRC grant (P50 AG005136, D.B.), NIH grant GM49758 (D.W.C.), Takeda Pharmaceuticals, NIH Ruth Kirschstein F32 award no. F32GM120791-02 (P.H.), Washington Research Foundation (P.H., T.W.C., and B.D.W), the Simons Foundation (V.K.M), NIH award R35GM122543 and Stanford Data Science Scholars program (F.P.), and EMBO ALTF 1605-2011 and Carlsbergfondet (P.G.). We thank the AMX beamline at the National Synchrotron Light Source II, a DOE Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704. We also want to thank the Advanced Light Source (ALS) BL-5.0.3, and the Advanced Photon Source (APS), 21ID-F, for beamline use. We would like to acknowledge T. Asami, R. Skene, D. Cole, N. Hird and D. Verhelle at Takeda for collaborative support and the TCAL SB&B group for their great help with crystallography studies. We would like to thank Dr. L. Goldschmidt and P. Vecchiato for help with organization and set-up of computational resources. We would also like to thank Drs G. Bhardwaj, K. Deibler, A. Roy, S. Berger, P. Salveson, H. Haddox, F. Seeger, and H. Park for insightful scientific discussions, specifically Drs P. Salveson, K. Deibler, and S. Berger for their critical review of the manuscript. We also thank Prof. O. Furman from Hebrew University in Israel for scientific discussions. We also thank M. Murphy, Dr. J. Decarreau, L. Carter, and Drs N. Woodall and S. Berger for help with experiments that were not included in the paper.
Rosetta software has been licensed to numerous not-for-profit and for-profit organizations. Rosetta Licensing is managed by UW CoMotion, and royalty proceeds are managed by the RosettaCommons. Under institutional participation agreements between the University of Washington, acting on behalf of the RosettaCommons, their respective institutions may be entitled to a portion of revenue received on licensing Rosetta software including programs described here. D.B. is an unpaid board member of RosettaCommons. V.K.M. is a co-founder of Menten AI, in which he holds equity. The remaining authors declare no competing interests.
Peer review information Nature Communications thanks Christian Olsen, Vikas Nanda and the other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hosseinzadeh, P., Watson, P.R., Craven, T.W. et al. Anchor extension: a structure-guided approach to design cyclic peptides targeting enzyme active sites. Nat Commun 12, 3384 (2021). https://doi.org/10.1038/s41467-021-23609-8
This article is cited by
Self-cyclisation as a general and efficient platform for peptide and protein macrocyclisation
Communications Chemistry (2023)
Structure-based prediction of HDAC6 substrates validated by enzymatic assay reveals determinants of promiscuity and detects new potential substrates
Scientific Reports (2022)
Des3PI: a fragment-based approach to design cyclic peptides targeting protein–protein interactions
Journal of Computer-Aided Molecular Design (2022)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.