Abstract
System noise identification is crucial to the engineering of robust quantum systems. Although existing quantum noise spectroscopy (QNS) protocols measure an aggregate amount of noise affecting a quantum system, they generally cannot distinguish between the underlying processes that contribute to it. Here, we propose and experimentally validate a spinlockingbased QNS protocol that exploits the multilevel energy structure of a superconducting qubit to achieve two notable advances. First, our protocol extends the spectral range of weakly anharmonic qubit spectrometers beyond the present limitations set by their lack of strong anharmonicity. Second, the additional information gained from probing the higherexcited levels enables us to identify and distinguish contributions from different underlying noise mechanisms.
Introduction
Studying noise sources affecting quantum mechanical systems is of great importance to quantum information processing, quantum sensing applications, and the fundamental understanding of microscopic noise mechanisms^{1,2,3,4}. Generally, a quantum twolevel system—a qubit—is employed as a sensor of noise that arises from the qubit environment including both classical and quantum sources^{2,5}. By driving the qubit with suitably designed external control fields and measuring its response in the presence of environmental noise, the spectral content of the noise can be extracted^{6,7,8,9,10}. Such noise spectroscopy techniques are generally referred to as quantum noise spectroscopy (QNS) protocols. Over the past two decades, QNS protocols have been explored for both pulsed (freeevolution) and continuous (drivenevolution) control schemes and experimentally implemented across many qubit platforms—including diamond nitrogen vacancy centers^{11,12}, nuclear spins^{6,13}, cold atoms^{14}, superconducting quantum circuits^{10}^{,}^{15,16,17,18}, semiconductor quantum dots^{19,20,21,22}, and trapped ions^{23}. Although these protocols have generally focused on Gaussian noise models, a new QNS protocol was recently developed and demonstrated that enables higherorder spectral estimation of nonGaussian noise in quantum systems^{24,25}.
Since QNS protocols commonly presume a qubit platform, they have generally been developed within a twolevel system approximation, without regard for higher energy levels. As a consequence, despite tremendous progress and successes, QNS protocols have certain limitations (for example, limited bandwidth) when applied to weakly anharmonic qubits such as the transmon^{26,27}, the gatemon^{28,29}, or the capacitively shunted flux qubit^{30}. However, since weakly anharmonic superconducting qubits are among the most promising platforms being considered for realizing quantum information processors^{31}, noise spectroscopy techniques that incorporate the effects of higherexcited states in these qubits must be developed to further improve their coherence and gate performance.
Among existing QNS protocols, the spinlocking approach has been shown to be applicable to both classical and nonclassical noise spectra. It is also experimentally advantageous, using a relatively straightforward relaxometry analysis to extract a spectral decomposition of the environmental noise affecting single qubits^{16,32}, and it has recently been extended to measure the crossspectra of spatially correlated noise in multiqubit systems^{33}. As with many contemporary QNS protocols, the spinlocking approach presumes a twolevelsystem approximation. While this approximation holds at low frequencies, its validity breaks down as one attempts to perform noise spectroscopy at frequencies approaching and exceeding qubit anharmonicity (e.g., around 200–300 MHz is conventional superconducting transmon qubits) due to the impact of additional energy levels, leading to systematic errors in the extracted noise spectrum.
In this work, we develop a multilevel spinlocking QNS protocol and experimentally validate it using a fluxtunable transmon qubit and accounting for five energy levels. We demonstrate an accurate spectral reconstruction of engineered flux noise over a frequency range 50–300 MHz, overcoming the spectral limitations imposed by the sensor’s relatively weak anharmonicity of ~200 MHz. Furthermore, by measuring the power spectra of dephasing noise acting on both the \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions, we extract and uniquely identify noise contributions from both flux noise and photon shot noise, an attribution that is not possible within solely a twolevel approximation.
Results
System Description
We consider an externallydriven dlevel quantum system (d > 2), which serves as the quantum noise sensor that evolves under the influence of its noisy environment (bath). Throughout this work, we consider only pure dephasing (σ_{z}type) noise. The impact of energy relaxation (T_{1}) on our protocol is discussed in Supplementary Note 6. In the interaction picture with respect to the bath Hamiltonian H_{B}, the joint sensorenvironment system can be described by the Hamiltonian:
where \(\leftj\right\rangle \left\langle j\right\) is the projector for the jth level of the multilevel sensor. The sensor eigenenergies are \(\hslash {\omega }_{{\rm{s}}}^{(j)}\) with the ground state energy set to zero, and the B^{(j)}(t) correspond to the timedependent noise operators that longitudinally couple to the jth level of the sensor and cause level j to fluctuate in energy. The raising and lowering operators of the sensor are denoted by \({\sigma }_{+}^{(j1,j)}\equiv \leftj\right\rangle \left\langle j1\right\) and \({\sigma }_{}^{(j1,j)}\equiv \leftj1\right\rangle \left\langle j\right\), respectively. The external driving field is denoted by ξ(t). We continuously drive the multilevel sensor with a signal
where A_{drive}, ω_{drive}, and ϕ correspond to the amplitude, the frequency and the phase of the driving field, respectively, and we assume ϕ = 0 without loss of generality. The parameter λ^{(j−1, j)} represents the strength of the \(\leftj1\right\rangle\)–\(\leftj\right\rangle\) transition relative to the \(\left0\right\rangle\)–\(\left1\right\rangle\) transition with λ^{(0, 1)} ≡ 1.
When the drive frequency ω_{drive} is resonant with the \(\left0\right\rangle\)–\(\left1\right\rangle\) transition frequency \({\omega }_{{\rm{s}}}^{(0,1)}\) of the sensor, the first two levels form a pair of dressed states, \({+}^{(0,1)}\rangle\) and \({}^{(0,1)}\rangle\). The level separation between dressed states is the Rabi frequency Ω^{(0, 1)}, and it is determined predominantly (although not exactly, as we describe below) by the effective driving strength λ^{(0, 1)}A_{drive} ≡ A_{drive}^{34,35}. These dressed states form the usual spinlocking basis \(\{{+}^{(0,1)}\rangle ,{}^{(0,1)}\rangle \}\) of a conventional, driven twolevel sensor^{16,32,33}.
We now generalize the twolevel spinlocking concept to the case of a multilevel sensor. By resonantly driving at the frequency \({\omega }_{{\rm{s}}}^{(j1,j)}\equiv {\omega }_{{\rm{s}}}^{(j)}{\omega }_{{\rm{s}}}^{(j1)}\) of the transition between states \(\leftj1\right\rangle\) and \(\leftj\right\rangle\), the system forms a pair of dressed states, \({+}^{(j1,j)}\rangle\) and \({}^{(j1,j)}\rangle\), separated by a Rabi frequency Ω^{(j−1, j)} (see Fig. 1a) that is determined predominantly by an effective driving strength λ^{(j−1, j)}A_{drive}. The effective twolevel system formed by the basis \(\{{+}^{(j1,j)}\rangle ,{}^{(j1,j)}\rangle \}\) acts as the jth spectrometer and probes dephasing noise that leads to a fluctuation of the \(j1\rangle\)–\(\leftj\right\rangle\) transition at frequency Ω^{(j−1, j)}. The case j = 1 then corresponds back to the conventional twolevel noise sensor.
Throughout the main text, we will refer to the reference frame and twodimensional subspace defined by the jth spinlocking basis {\({+}^{(j1,j)}\rangle\), \({}^{(j1,j)}\rangle\)} as the jth spinlocking frame and the jth spinlocking subspace, respectively. To move to the jth spinlocking frame, we apply unitary transformations and truncate the Hilbert space of the multilevel sensor into the jth spinlocking subspace (see detailed derivation in Supplementary Note 4). Then, the effective Hamiltonian describing the jth noise spectrometer is:
where \({\tilde{\sigma }}_{z}^{(j1,j)}\), \({\tilde{\sigma }}_{+}^{(j1,j)}\), and \({\tilde{\sigma }}_{}^{(j1,j)}\) denote the Pauli Z operator, the raising operator, and the lowering operator of the jth spinlocked spectrometer, respectively. The longitudinal noise in the lab frame (Eq. (1)) for a multilevel system leads to both transverse and longitudinal noise in the spinlocking frame. As a result, the longitudinal noise operator B^{(j)}(t) in the lab frame is transformed into the spinlocking frame as a transverse noise operator \({\tilde{B}}_{\perp }^{(j1,j)}(t)\), which leads to longitudinal relaxation, and the longitudinal noise operator \({\tilde{B}}_{\parallel }^{(j1,j)}(t)\), which leads to transverse relaxation, within the jth spin locking subspace. They are given as linear combinations of B^{(j)}(t), arising from the level dressing across multiple levels as follows:
where we define the noise participation ratio\({\alpha }_{(j1,j)}^{(k)}\) (\({\beta }_{(j1,j)}^{(k)}\)) as a dimensionless factor that quantifies the fraction of the dephasing noise at the kth level that is transduced (i.e., projected) to transverse (longitudinal) noise of the jth pair of spinlocked states. The noise participation ratios \({\alpha }_{(j1,j)}^{(k)}\) and \({\beta }_{(j1,j)}^{(k)}\) can be estimated by numerically solving for the dressed states in terms of the bare states \(\leftj\right\rangle\) (see Supplementary Note 4 for details). Note that the sign of the noise participation ratios can be either positive or negative, leading to the possibility for effective constructive and destructive interference between the noise operators B^{(k)}(t).
There are two noteworthy distinctions between a manifestly twolevel system and a multilevel system. First, although the splitting energy ℏΩ^{(j−1, j)} between the jth pair of dressed states (the jth spinlocked states) is predominantly determined by the effective driving energy ℏ(λ^{(j−1, j)}A_{drive}), they are not universally equivalent. For an ideal twolevel system within the rotating wave approximation, the Rabi frequency is indeed proportional to the effective driving field via the standard Rabi formula^{16,32,33}. However, this is not generally the case in a multilevel setting due to additional level repulsion from adjacent dressed states^{36}. Rather, in the multilevel setting of relevance here, the distinction between Ω^{(j−1, j)} and λ^{(j−1, j)}A_{drive} must be taken into account to yield an accurate estimation of the noise spectrum.
Second, as a consequence of the multilevel dressing, more than two noise operators B^{(k)}(t) generally contribute to the longitudinal relaxation within a given pair of spinlocked states. In the limit where λ^{(j−1, j)}A_{drive} is small compared to the sensor anharmonicities, Eqs. (4) and (5) reduce to
which conform to the standard spinlocking noise spectroscopy protocol for a twolevel sensor^{16,32,33}. However, as the effective drive strength λ^{(j−1, j)}A_{drive} increases, the contribution of peripheral bare states—other than \(\leftj1\right\rangle\) and \(\leftj\right\rangle\) —to the formation of the spinlocked states \({+}^{(j1,j)}\rangle\) and \({}^{(j1,j)}\rangle\) increases. As a result, in the large λ^{(j−1, j)}A_{drive} limit, the multilevel dressing transduces the frequency fluctuations of more than two levels to the longitudinal relaxation within the jth spin locking frame. Also, this multilevel effect contributes to the emergence of nonzero transverse relaxation \({B}_{\parallel }^{(j1,j)}(t)\), terms which would otherwise be absent within a twolevel approximation^{16,32,33}.
Noise spectroscopy protocol
The multilevel noise spectroscopy protocol introduced here consists of measuring the energy decay rate \({{{\Gamma }}}_{1\rho }^{(j1,j)}\) (i.e., longitudinal relaxation rate) and the polarization \(\langle {\tilde{\sigma }}_{z}^{(j1,j)}(\tau )\rangle\) in the jth spinlocking frame, and then uses these quantities to extract the spectral density \({\tilde{S}}_{\perp }^{(j1,j)}\) of the noise transverse to the spinlocking quantization axis. This in turn can be related to the longitudinal spectral density \({S}_{\parallel }^{(j1,j)}\) that causes dephasing (i.e., transverse relaxation) in the original, undriven reference frame (the qubit “lab frame”^{16}).
We begin by preparing the multilevel sensor in the jth spinlocked state \({+}^{(j1,j)}\rangle\) by applying a sequence of resonant π pulses \(\left[{\pi }^{(0,1)},{\pi }^{(1,2)},\cdots {\pi }^{(j2,j1)}\right]\), which act to sequentially excite the sensor from the ground state \(\left0\right\rangle\) to state \(\leftj1\right\rangle\). We then apply a π^{(j−1, j)}/2 pulse along the yaxis of the Bloch sphere, where the north and south poles now correspond to \(\leftj1\right\rangle\) and \(\leftj\right\rangle\), respectively^{13}. The pulse acts to rotate the Bloch vector from the south pole to the xaxis, thereby placing the multilevel sensor in the jth spinlocked state \({+}^{(j1,j)}\rangle =(\leftj1\right\rangle +\leftj\right\rangle )/\sqrt{2}\). Subsequently, a spinlocking drive with amplitude A_{drive} is applied along the xaxis (collinear with the Bloch vector) at a frequency resonant with the \(\leftj1\right\rangle\)\(\leftj\right\rangle\) transition and for a duration τ. By adiabatically turning on and off the drive, we keep the state of the sensor within the jth spinlocking subspace. Once the drive is off, a second π^{(j−1, j)}/2 pulse is applied along the yaxis in order to map the spinlocking basis \(\{{+}^{(j1,j)}\rangle ,{}^{(j1,j)}\rangle \}\) onto the measurement basis \(\{\leftj\right\rangle ,\leftj1\right\rangle \}\), and the qubit is then read out. This procedure is then repeated N times to obtain estimates for the probability of being in states {\(\leftj\right\rangle\) and \(\leftj1\right\rangle\)}, which represent the probability of being in states {\({+}^{(j1,j)}\rangle\) and \({}^{(j1,j)}\rangle\)}, respectively.
The above protocol is then repeated as a function of τ in order to measure the longitudinal spinrelaxation decayfunction of the jth spinlocked spectrometer. For each τ, we define a normalized polarization of the spectrometer,
where ρ^{(j, j)}(τ) denotes the population (the probability) of the jth level. From the τdependence of \(\langle {\tilde{\sigma }}_{z}^{(j1,j)}(\tau )\rangle\), we extract both the relaxation rate \({{{\Gamma }}}_{1\rho }^{(j1,j)}\) of the spin polarization and the equilibrium polarization \({\tilde{\sigma }}_{z}^{(j1,j)}(\tau ){ }_{\tau \to \infty }\). The values \({{{\Gamma }}}_{1\rho }^{(j1,j)}\) and \({\tilde{\sigma }}_{z}^{(j1,j)}(\tau ){ }_{\tau \to \infty }\) extracted from an experiment performed at a particular Rabi frequency Ω^{(j−1, j)} are related to the transverse noise PSD \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )\) at angular frequency ω = Ω^{(j−1, j)} as follows (see Supplementary Note 5 for details):
Here, the transverse noise spectrum \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )\) is the Fourier transform of the twotime correlation function of the transverse noise operators acting on the spectrometer:
In the following noise spectroscopy measurements, we will record the spin relaxation for the 1st and 2nd spinlocked noise spectrometers (Fig. 1b, c). Then, the traces are fit to an exponential decay, allowing us to extract \({{{\Gamma }}}_{1\rho }^{(j1,j)}\) and \(\langle {\tilde{\sigma }}_{z}^{(j1,j)}(t)\rangle { }_{t\to \infty }\). This is repeated for various drive amplitude A_{drive} in order to reconstruct \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )\). For simplicity, we will hereafter refer to the spinlocking noise spectroscopy exploiting the \(\leftj1\right\rangle\)–\(\leftj\right\rangle\) transition as SL^{(j−1, j)}. To validate the protocol, we will perform the spin relaxation experiments both in the presence and in the absence of engineered noise, and distinguish the contributions of T_{1} decay and native dephasing noise from the estimation of \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )\) (see Supplementary Note 7 for details).
Experimental validation
We use the Xmon^{37} variant of the superconducting fluxtunable transmon as a multilevel noise sensor. Our experimental test bed contains three transmon qubits, each of which is dispersively coupled to a coplanarwaveguide cavity for qubit state readout^{38,39}. In Fig. 2a, b, the rightmost transmon (blue) operates as a multilevel quantum sensor. The other transmons’ modes are fardetuned from the sensor, such that their presence can be neglected (see Supplementary Note 1). In this work, we focus on two environmental noise channels that couple to the transmon sensor. One noise channel is formed by the inductive coupling of the sensor’s SQUID loop to the fluctuating magnetic field in the qubit environment (flux noise). In this case, a fluctuating magnetic flux threading the SQUID loop results in the fluctuation of the qubit effective Josephson energy, thereby fluctuating the energy levels of the transmon sensor. The other noise source arises from photon number fluctuations in the readout resonator. In this case, photonnumber fluctuations in the readout resonator cause a photonnumberdependent frequency shift of the energy levels of the sensor. Figure 2c shows a reduced measurement schematic. We generate and apply a known level of engineered flux noise and coherent photon shot noise to the qubit, which we then use as a sensor to validate our protocol (see Supplementary Note 2). We bias the transmon sensor at a fluxsensitive value Φ_{ext} = 0.17Φ_{0} (dashed line in Fig. 2d). At this operating point, the energy relaxation times T_{1} for \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions are ~ 58μs and ~ 31μs, respectively. Note that the energy relaxation time for the \(\left1\right\rangle\)–\(\left2\right\rangle\) transition is approximately half that of the \(\left0\right\rangle\)–\(\left1\right\rangle\) transition’s relaxation time, which is expected for weakly anharmonic systems^{40}.
To test our protocol, we first demonstrate an accurate spectral reconstruction of engineered flux noise over a range of frequencies – 50 MHz to 300 MHz – that are smaller than, comparable to, and larger in magnitude than the transmon anharmonicity \(({\omega }_{{\rm{s}}}^{(1,2)}{\omega }_{{\rm{s}}}^{(0,1)})/2\pi =\,\text{207.3}\,\ \,\text{MHz}\,\). As with the standard spinlocking protocol, the transmon needs to be driven sufficiently strongly to form an energy splitting ℏΩ^{(j−1, j)} between a pair of spinlocked states \(\{{+}^{(j1,j)}\rangle ,{}^{(j1,j)}\rangle \}\) at the measurement frequency of interest. However, when the splitting energy is comparable with or larger than the anharmonicity, the driven transmon can no longer be approximated as a twolevel system, and the multilevel dressing that results must be carefully incorporated into the analysis to accurately reconstruct the PSD.
The first step in our noise spectrosopy demonstration is to measure the Rabi frequencies Ω^{(j−1, j)} for the \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions as a function of the drive amplitude A_{drive} (Fig. 3a). To determine A_{drive}, we assume a linear dependence in the weak driving limit where Rabi frequency < 5 MHz. From this linear dependence, we could extrapolate A_{drive} to the strong driving regime. For both the Rabi and the SL^{(j−1, j)} measurements, the rising and falling edges of the spinlocking drive envelope is Gaussianshaped (\(\propto \exp ({t}^{2}/2{\sigma }^{2})\)) with σ = 12 ns. For a given amplitude, the resulting Rabi frequency for the \(\leftj1\right\rangle\)–\(\leftj\right\rangle\) transition is equivalent to the level splitting Ω^{(j−1, j)} between the spinlocked states (\({+}^{(j1,j)}\rangle ,{}^{(j1,j)}\rangle\)). However, recall that the measured Rabi frequencies Ω^{(j−1, j)} begin to deviate from the twolevel system approximation (Ω^{(j−1, j)} = λ^{(j−1, j)}A_{drive}) as the drive amplitude is increased. The discrepancy (\(\Omega^{(j1,j)}\) − λ^{(j−1, j)}A_{drive}) is due to the multilevel dressing effect, the influence of other levels beyond the twolevel approximation. Alternatively, one can also observe such frequency deviations by using pumpprobe spectroscopy techniques (see Supplementary Note 3)^{35,41}. As such, the frequency shifts (Ω^{(j−1, j)} − λ^{(j−1, j)}A_{drive}) due to this multilevel dressing must be taken into account in order to obtain an accurate estimation of the flux noise spectra at frequencies comparable or larger than the anharmonicity. In our experiments, we found that including up to the 4th excited state [solid curves in Fig. 3a] was sufficient to obtain agreement between our numerical simulations and the experimentally observed frequency shifts.
Similarly, we must consider the noise participation of the peripheral bare states introduced through the multilevel dressing effect in order to obtain an accurate spectral esimation at high frequencies. To build intuition, we begin considering the lowfrequency (small A_{drive}) limit, where the longitudinal relaxation for SL^{(j−1, j)} is determined solely by dephasing noise that acts on \(\leftj1\right\rangle\) and \(\leftj\right\rangle\) (Eq. (6)). Then, in the large A_{drive} limit, the flux noise acting on the peripheral levels also contributes to the longitudinal spin relaxation. Thus, we must use the noise participation ratios \({\alpha }_{(j1,j)}^{(k)}\) for each energy level k, including the original two levels and the peripheral levels:
where S_{Φ}(ω) denotes the power spectral density of the engineered flux noise at frequency ω/2π, and \(\partial {\omega }_{{\rm{s}}}^{(k)}/\partial {{{\Phi }}}_{{\rm{ext}}}\) denotes the flux noise sensitivity of the kth level of the sensor. For our experiment, the values of \({\alpha }_{(j1,j)}^{(k)}\) for SL^{(0, 1)} and SL^{(1, 2)} are numerically estimated and shown in Fig. 3b, c, respectively. We also numerically estimate \(\partial {\omega }_{{\rm{s}}}^{(k)}/\partial {{{\Phi }}}_{{\rm{ext}}}\) for k ∈ {1, ⋯ , 4} by solving the circuit Hamiltonian of the transmon sensor (see Supplementary Note 1).
We now reconstruct the spectrum of engineered Lorenziandistributed flux noise centered at 200 MHz, a frequency comparable to the sensor anharmonicity (see in Fig. 3d). For the sake of comparison, we first plot PSD estimates based on a twolevel approximation (hollow circles). The frequencies of these PSD estimates are shifted by λ^{(j−1, j)}A_{drive} − Ω^{(j−1, j)} from the ideal flux noise spectra (gray shading). We would also conclude (erroneously) that the extracted flux noise PSD amplitude increases as the frequency increases when estimated using the twolevel approximation. In order to estimate the flux noise PSD accurately, the two corrections described above must be applied to the PSD estimates to account for the multilevel dressing effects: Step 1 – a frequency shift; and Step 2 – an amplitude adjustment. Upon applying these corrections, we successfully reconstruct the PSD estimates for the 200 MHz engineered flux noise for both SL^{(0, 1)} and SL^{(1, 2)} (markers lie on gray region, Fig. 3d).
Using this approach, we benchmark the performance of SL^{(0, 1)} and SL^{(1, 2)} for a set of the Lorentzianshaped engineered flux noise spectra which are centered at f_{0} = 50, 100, 150, 200, 250, and 300 MHz. Figure 3e, f compare the ideal noise spectra (gray shading) with the corrected flux noise PSD estimates (circles sitting on the envelope of the gray regions and following a dashed line) measured by SL^{(0, 1)} (blue shades) and SL^{(1, 2)} (red shades), respectively, and with the uncorrected estimates (“x” shapes following a solid line) that deviate in both the inferred frequency and power. The different colors correspond to the different engineered flux noise spectra. The agreement between the corrected PSD estimates and the engineered noise PSDs clearly substantiates the idea that our protocol overcomes the anharmonicity limit of the noise sampling frequency by taking the multilevel dressing effect into account.
We now move on to distinguishing the noise contributions from both engineered flux and photonshot noise by measuring SL^{(0, 1)} and SL^{(1, 2)}. Importantly, both noise sources induce frequency fluctuations of the \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions, but with a different and distinguishing relative noise power (\({\tilde{S}}_{\perp }^{(1,2)}(\omega )/{\tilde{S}}_{\perp }^{(0,1)}(\omega )\)).
In the case of flux noise, since the degree of transmon anharmonicity is independent of the external magnetic flux threading the transmon loop Φ_{ext}^{26}, the fluxnoiseinduced frequency fluctuations of the \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions are equal: \(\partial {\omega }_{{\rm{s}}}^{(0,1)}/\partial {{{\Phi }}}_{{\rm{ext}}}=\partial {\omega }_{{\rm{s}}}^{(1,2)}/\partial {{{\Phi }}}_{{\rm{ext}}}\). Therefore, for lowfrequency flux noise that causes dephasing, the relative noise power spectra of SL^{(1, 2)} to SL^{(0, 1)} is given as:
where we have introduced the subscript Φ to indicate flux noise due to Φ_{ext}.
In contrast, photonshot noise induces frequency fluctuations for each level transition that scale with the corresponding effective dispersive strength χ^{(j−1, j)}^{32}. The photonnumberdependent frequency shift due to photon shot noise affecting the \(\leftj1\right\rangle\)–\(\leftj\right\rangle\) transition is given as \(\delta {\omega }_{{\rm{s}}}^{(j1,j)}=2{\chi }^{(j1,j)}\bar{n}\), where \(\bar{n}\) is the average residual photon number in the resonator. Hence, the relative noise power spectra of SL^{(1, 2)} to SL^{(0, 1)} for photon shot noise is:
where we have introduced the subscript \(\bar{n}\) to indicate photon shot noise. This finding highlights the usefulness of measuring multiple noise spectra in order to deconvolve environmental noise processes. We shall presume that these two independent sources of engineered noise—flux noise and photon shot noise—are the only two sources of transverse noise impacting the spinlocked spectrometers, and so we may define the total transverse noise power spectrum as \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )={\tilde{S}}_{{{\Phi }},\perp }^{(j1,j)}(\omega )+{\tilde{S}}_{\bar{n},\perp }^{(j1,j)}(\omega )\).
We now demonstrate the identification and characterization of two independent noise sources by measuring the twofold noise spectra \({\tilde{S}}_{\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\perp }^{(1,2)}(\omega )\). To begin, in Fig. 4a, we present the experimentally extracted spectra \({\tilde{S}}_{{{\Phi }},\perp }^{(0,1)}(\omega )\) (blue circles) and \({\tilde{S}}_{{{\Phi }},\perp }^{(1,2)}(\omega )\) (red circles) for solely Lorentzianshaped engineered flux noise centered at 6 MHz. The measured \({\tilde{S}}_{{{\Phi }},\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{{{\Phi }},\perp }^{(1,2)}(\omega )\) are essentially identical, as one expects for transmon flux noise and consistent with Eq. (12). Similarly, we also present the extracted \({\tilde{S}}_{\bar{n},\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\bar{n},\perp }^{(1,2)}(\omega )\) for solely engineered coherent photonshot noise. The results are Lorentzianshaped spectra centered at the frequency detuning Δ/2π ≡ (ω_{r} − ω_{n})/2π = 6.05 MHz between the readout resonator resonance frequency (ω_{r}/2π) and the applied coherent tone frequency (ω_{n}/2π) used to generate the shot noise (Fig. 4b)^{32}. Contrary to the flux noise case, here the measured \({\tilde{S}}_{\bar{n},\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\bar{n},\perp }^{(1,2)}(\omega )\) have different magnitudes, with a measured ratio of \({\tilde{S}}_{\bar{n},\perp }^{(1,2)}(\omega )/{\tilde{S}}_{\bar{n},\perp }^{(0,1)}(\omega )\approx 1.61\) (see Eq. (13)), due to the differing values of χ^{(0, 1)} and χ^{(1, 2)}. Next, we demonstrate the noise spectroscopy of a mixture of two engineered noise and identify their individual noise contributions. We inject flux noise ranging from 1 MHz to 20 MHz with a “boxcar” envelope and, simultaneously, coherent photon shot noise from a coherent tone with a frequency that is detuned by Δ/2π = 6.05 MHz from the readoutresonator resonance frequency. Figure 4c presents the experimental data for the total transverse noise power spectra \({\tilde{S}}_{\perp }^{(0,1)}(\omega )\) (blue) and \({\tilde{S}}_{\perp }^{(1,2)}(\omega )\) (red), which include both flux noise and photon shot noise contributions. The known, engineered noise spectra for each transition is indicated by the gray box car (flux noise) and by the blue and red Lorentzians (shot noise) for the 01 and 12 transitions, respectively. Over the frequency domain where both flux and photonshot noise are significant, (3 MHz ≤ ω/2π ≤ 9 MHz), a distinction between \({\tilde{S}}_{\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\perp }^{(1,2)}(\omega )\) is clearly observed, and the measured total noise spectral density is the sum of the flux noise and photon shot noise contributions, consistent with our assumption that these two noise sources are independent. In contrast, over the frequency domain where flux noise dominates (15 MHz ≤ ω/2π ≤ 20 MHz), \({\tilde{S}}_{\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\perp }^{(1,2)}(\omega )\) are similar in magnitude and predominantly match the gray region. Lastly, at 20 MHz, above which no external noise was applied, the data exhibit a discrete jump down to the sensitivity limit of the experiment (See Supplementary Note 6 for discussion on the sensitivity limit due to T_{1} of the sensor). This result indicates that we can distinguish the noise contributions from flux and photon shot noise by measuring the twofold noise spectra \({\tilde{S}}_{\perp }^{(0,1)}(\omega )\) and \({\tilde{S}}_{\perp }^{(1,2)}(\omega )\). More generally, the independent extraction of unknown flux noise and photon shot noise would be performed by measuring \({\tilde{S}}_{\perp }^{(j1,j)}(\omega )\) for a sufficient number of transitions j − 1, j and frequency ranges in order to back out the individual contributions (within certain and appropriate assumptions about the origin and type of noise).
Discussion
In summary, we introduced and experimentally validated a noise spectroscopy protocol that utilizes multiple transitions of a qubit as a quantum sensor of its noise environment. By moving beyond the conventional twolevel approximation, our approach overcomes the anharmonicity frequency limit of previous spinlocking approaches. We further show that measuring the noise spectra for multiple transitions enables one to distinguish certain noise sources, such as flux noise and photon shot noise, by leveraging the differing impact of those noise sources on the different transitions. As an example, we measured the twofold power spectra of dephasing noise acting on the \(\left0\right\rangle\)–\(\left1\right\rangle\) and \(\left1\right\rangle\)–\(\left2\right\rangle\) transitions of a transmon, and showed that our protocol can distinguish between externally applied, known, engineered noise contributions from flux noise and photon shot noise. We anticipate that applying this protocol to even higher level transitions (j > 2) of a superconducting qubit sensor will enable one to distinguish other dephasing noise sources, such as charge noise^{42}.
Although we mainly focus on the spinlocking based multilevel QNS throughout this work, extending the dynamic decoupling (D.D.) based noise spectroscopy protocols^{6,9,24} to multilevel systems would also yield improved QNS performance (see Supplementary Note 8 for a discussion of why we focus on the spinlocking based approaches rather than the D.D. based approaches throughout this work). Notably, the idea of discriminating noise sources by employing multiple level transitions as distinct spectrometers is immediately applicable to dynamic decoupling based approaches. In view of recent advances in optimal bandlimited control^{43}, we expect the implementation of dynamic decoupling based QNS using multilevel sensors will augment knowledge about noise sources in a manner similar to the spinlocking approach described here.
In this paper, we demonstrated our protocol by measuring engineered noise in the fluxtunable transmon sensor. We chose the operating point (flux bias) and operating frequency range (measured spectral range) of the sensor, such that it is dominantly affected by the engineered noise. However, the technique discussed here can be also applied to measure intrinsic noise of transmons such as 1/f flux noise^{3,44,45}. Notably, by biasing the sensor at more fluxsensitive point, the sensitivity to flux noise can be further increased in order to detect intrinsic flux noise.
While we employ a fluxtunable transmon as a multilevel noise sensor, our methodology is portable to other anharmonic multilevel systems, such as the Cshunt flux qubit^{30} and the fluxonium^{46,47}. Since the sensitivity of the qubit energies to various noise sources differ by qubit design, employing other superconducting qubits as multilevel noise sensors will enable us to explore various noise sources. We also envision the spinlocking QNS protocols  whether in a TLS approximation or a multilevel system  being used for other qubit modalities, such as quantum dot qubits or trapped ion qubits, as sensors of their local environments, such as their substrates or surface traps.
As detailed in Supplementary Note 6, the T_{1} of the qubit can limit its noise sensitivity. However, as T_{1} is improved through a combination of qubit design^{47} and advanced materials^{48}, the sensitivity and utility of our approach also improves. Using diagnostic techniques such as the QNS protocol developed here to identify and characterize noise sources is an important step towards mitigating and eliminating them.
Data availability
The data that support the findings of this study may be made available from the corresponding authors upon request and with the permission of the US Government sponsors who funded the work. Source data are provided with this paper.
Code availability
The code used for the analyses may be made available from the corresponding authors upon request and with the permission of the US Government sponsors who funded the work.
References
Preskill, J. Quantum Computing in the NISQ era and beyond. Quantum 2, 79 (2018).
Degen, C. L., Reinhard, F. & Cappellaro, P. Quantum sensing. Rev. Mod. Phys. 89, 035002 (2017).
Paladino, E., Galperin, Y. M., Falci, G. & Altshuler, B. L. 1/f noise: Implications for solidstate quantum information. Rev. Mod. Phys. 86, 361–418 (2014).
Krantz, P. et al. A quantum engineer’s guide to superconducting qubits. Appl. Phys. Rev. 6, 021318 (2019).
Schoelkopf, R. J., Clerk, A. A., Girvin, S. M., Lehnert, K. W. & Devoret, M. H. Qubits as spectrometers of quantum noise. In Nazarov, Y. V. (ed.) Quantum Noise in Mesoscopic Physics, NATO Science Series (Springer, Dordrecht, 2002). vol. 97. pp.175–203.
Álvarez, G. A. & Suter, D. Measuring the spectrum of colored noise by dynamical decoupling. Phys. Rev. Lett. 107, 230501 (2011).
Yuge, T., Sasaki, S. & Hirayama, Y. Measurement of the noise spectrum using a multiplepulse sequence. Phys. Rev. Lett. 107, 170504 (2011).
Young, K. C. & Whaley, K. B. Qubits as spectrometers of dephasing noise. Phys. Rev. A 86, 012314 (2012).
PazSilva, G. A. & Viola, L. General transferfunction approach to noise filtering in openloop quantum control. Phys. Rev. Lett. 113, 250501 (2014).
Ithier, G. et al. Decoherence in a superconducting quantum bit circuit. Phys. Rev. B 72, 134519 (2005).
Meriles, C. A. et al. Imaging mesoscopic nuclear spin noise with a diamond magnetometer. J. Chem. Phys. 133, 124105 (2010).
Romach, Y. et al. Spectroscopy of surfaceinduced noise using shallow spins in diamond. Phys. Rev. Lett. 114, 017601 (2015).
Vandersypen, L. M. K. & Chuang, I. L. Nmr techniques for quantum control and computation. Rev. Mod. Phys. 76, 1037–1069 (2005).
Carter, J. D. & Martin, J. D. D. Coherent manipulation of cold rydberg atoms near the surface of an atom chip. Phys. Rev. A 88, 043429 (2013).
Bylander, J. et al. Noise spectroscopy through dynamical decoupling with a superconducting flux qubit. Nat. Phys. 7, 565–570 (2011).
Yan, F. et al. Rotatingframe relaxation as a noise spectrum analyser of a superconducting qubit undergoing driven evolution. Nat. Commun. 4, 2337 (2013).
Yoshihara, F. et al. Flux qubit noise spectroscopy using Rabi oscillations under strong driving conditions. Phys. Rev. B 89, 020503(R) (2014).
Quintana, C. M. et al. Observation of classicalquantum crossover of 1/f flux noise and its paramagnetic temperature dependence. Phys. Rev. Lett. 118, 057702 (2017).
Dial, O. E. et al. Charge noise spectroscopy using coherent exchange oscillations in a singlettriplet qubit. Phys. Rev. Lett. 110, 146804 (2013).
Muhonen, J. T. et al. Storing quantum information for 30 seconds in a nanoelectronic device. Nat. Nanotechnol. 9, 986–991 (2014).
Chan, K. W. et al. Assessment of a silicon quantum dot spin qubit environment via noise spectroscopy. Phys. Rev. Appl. 10, 044017 (2018).
Yoneda, J. et al. A quantumdot spin qubit with coherence limited by charge noise and fidelity higher than 99.9%. Nat. Nanotechnol. 13, 102–107 (2018).
Frey, V. M. et al. Application of optimal bandlimited control protocols to quantum noise sensing. Nat. Commun. 8, 2189 (2017).
Norris, L. M., PazSilva, G. A. & Viola, L. Qubit noise spectroscopy for nongaussian dephasing environments. Phys. Rev. Lett. 116, 150503 (2016).
Sung, Y. et al. NonGaussian noise spectroscopy with a superconducting qubit sensor. Nat. Commun. 10, 3715 (2019).
Koch, J. et al. Chargeinsensitive qubit design derived from the cooper pair box. Phys. Rev. A 76, 042319 (2007).
Majer, J. et al. Coupling superconducting qubits via a cavity bus. Nature 449, 443–447 (2007).
Larsen, T. W. et al. Semiconductornanowirebased superconducting qubit. Phys. Rev. Lett. 115, 127001 (2015).
Wang, J. I. et al. Coherent control of a hybrid superconducting circuit made with graphenebased van der waals heterostructures. Nat. Nanotechnol. 14, 120–125 (2019).
Yan, F. et al. The flux qubit revisited to enhance coherence and reproducibility. Nat. Commun. 7, 12964 (2016).
Arute, F. et al. Quantum supremacy using a programmable superconducting processor. Nature 574, 505–510 (2019).
Yan, F. et al. Distinguishing coherent and thermal photon noise in a circuit quantum electrodynamical system. Phys. Rev. Lett. 120, 260504 (2018).
von Lüpke, U. et al. Twoqubit spectroscopy of spatiotemporally correlated quantum noise in superconducting qubits. PRX Quantum 1, 010305 (2020).
Bishop, L. S. et al. Nonlinear response of the vacuum Rabi resonance. Nat. Phys. 5, 105–109 (2009).
Braumüller, J. et al. Multiphoton dressing of an anharmonic superconducting manylevel quantum circuit. Phys. Rev. B 91, 054523 (2015).
Koshino, K. et al. Observation of the threestate dressed states in circuit quantum electrodynamics. Phys. Rev. Lett. 110, 263601 (2013).
Barends, R. et al. Coherent josephson qubit suitable for scalable quantum integrated circuits. Phys. Rev. Lett. 111, 080502 (2013).
Jeffrey, E. et al. Fast accurate state measurement with superconducting qubits. Phys. Rev. Lett. 112, 190504 (2014).
Sete, E. A., Martinis, J. M. & Korotkov, A. N. Quantum theory of a bandpass purcell filter for qubit readout. Phys. Rev. A 92, 012325 (2015).
Peterer, M. J. et al. Coherence and decay of higher energy levels of a superconducting transmon qubit. Phys. Rev. Lett. 114, 010501 (2015).
Baur, M. et al. Measurement of autlertownes and mollow transitions in a strongly driven superconducting qubit. Phys. Rev. Lett. 102, 243602 (2009).
Christensen, B. G. et al. Anomalous charge noise in superconducting qubits. Phys. Rev. B 100, 140503 (2019).
Frey, V., Norris, L. M., Viola, L. & Biercuk, M. J. Simultaneous spectral estimation of dephasing and amplitude noise on a qubit sensor via optimally bandlimited control. Phys. Rev. Appl. 14, 024021 (2020).
Oliver, W. D. & Welander, P. B. Materials in superconducting quantum bits. MRS Bull. 38, 816–825 (2013).
Braumüller, J. et al. Characterizing and optimizing qubit coherence based on squid geometry. Phys. Rev. Appl. 13, 054079 (2020).
Manucharyan, V. E., Koch, J., Glazman, L. I. & Devoret, M. H. Fluxonium: Single cooperpair circuit free of charge offsets. Science 326, 113–116 (2009).
Nguyen, L. B. et al. Highcoherence fluxonium qubit. Phys. Rev. X 9, 041041 (2019).
Place, A. P. M. et al. New material platform for superconducting transmon qubits with coherence times exceeding 0.3 milliseconds. arXiv preprint arXiv:2003.00024 (2020).
Acknowledgements
It is a pleasure to thank F. Beaudoin, L. M. Norris, and L. Viola for insightful discussions, and M. Pulido for generous assistance. This research was funded by the U.S. Army Research Office grant No. W911NF1410682; and by the Department of Defense via MIT Lincoln Laboratory under Air Force Contract No. FA872105C0002. Y.S. acknowledges support from the Korea Foundation for Advanced Studies. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of the U.S. Government.
Author information
Authors and Affiliations
Contributions
Y.S., A.V., J.B., and W.D.O conceived the project. Y.S., A.V., and S.G. performed the experiment and F.Y. and W.D.O. provided feedback. Y.S. developed the theoretical framework and carried out the numerical simulation with constructive feedback from A.V., J.B., F.Y., and W.D.O. A.J.M., D.K.K., and J.L.Y. fabricated the device. J.B., J.W., M.K., R.W., A.B., and M.E.S. provided experimental assistance. T.P.O., S.G., and W.D.O. supervised the project. All authors contributed to the discussion of the results and the manuscript.
Corresponding authors
Ethics declarations
Competing interests
Y.S., J.B., A.V., S.G., W.D.O., and Massachusetts Institute of Technology have filed a provisional US patent application related to multilevel quantum noise spectroscopy protocols. All other authors have no competing interests.
Additional information
Peer review information Nature Communications thanks Matthew Reagor and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sung, Y., Vepsäläinen, A., Braumüller, J. et al. Multilevel quantum noise spectroscopy. Nat Commun 12, 967 (2021). https://doi.org/10.1038/s41467021210983
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467021210983
This article is cited by

Intrinsic and induced quantum quenches for enhancing qubitbased quantum noise spectroscopy
Nature Communications (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.