Abstract
Diverse methods have been developed to tailor the number of metal atoms in metal nanoclusters, but control of surface ligand number at a given cluster size is rare. Here we demonstrate that reversible addition and elimination of a single surface thiolate ligand (-SR) on gold nanoclusters can be realized, opening the door to precision ligand engineering on atomically precise nanoclusters. We find that oxidative etching of [Au25SR18]− nanoclusters adds an excess thiolate ligand and generates a new species, [Au25SR19]0. The addition reaction can be reversed by CO reduction of [Au25SR19]0, leading back to [Au25SR18]− and eliminating precisely one surface ligand. Intriguingly, we show that the ligand shell of Au25 nanoclusters becomes more fragile and rigid after ligand addition. This reversible addition/elimination reaction of a single surface ligand on gold nanoclusters shows potential to precisely control the number of surface ligands and to explore new ligand space at each nuclearity.
Similar content being viewed by others
Introduction
Metal nanoclusters have received tremendous research interests in the past two decades due to their atomically-precise structures, intriguing physicochemical properties, and wide potential applications1,2,3,4,5. Because of the atomically-precise nature of metal nanoclusters, delicate control of cluster size in synthesis has long been the crucial prerequisite in research1,2,3,4,5,6. Taking thiolate-protected Au nanoclusters as an example, the most traditional and widely-used method is the chemical reduction of Au(I)-thiolate precursors followed by a size-focusing process7,8. It has been reported that, in the size-focusing process, oxygen (O2)-generated thiol radicals can induce the selective etching of metastable intermediates by drawing out Au atoms from the metallic core (i.e., top-down process)9. As a result, the polydisperse species will transform to thermodynamically stable monodisperse final products.
Thiolate-protected metal nanoclusters are often referred to as [MnSRm]q (SR denotes thiolate ligands), where n, m, q represent numbers of metal atoms, thiolate ligands and net charge, respectively. The size-focusing will change the n value and result in some thermodynamically stable magic sizes, such as [Au25SR18]−. The high stability of [Au25SR18]− can be explained by the valence electron counts (N* = n–m–q) of 8, which fulfills the shell closing phenomenon10. As a result, [Au25SR18]− is one of the typical species survived in the size-focusing or ligand-induced etching process11,12. Its oxidation will simply change the q value from −1 to 0 or +1 and introduce slight distortion into its structure, without changing the total molecular formula13,14,15.
Tailoring of surface ligands is equally important considering the total synthesis of metal nanoclusters6. The surface ligands will greatly influence the cluster size, as well as physicochemical properties, self-assembly behavior, stability and so on16,17,18,19,20,21,22,23,24,25,26,27. Ligand exchange reaction is the main technique used to tailor the surface ligands of thiolate-protected metal nanoclusters28. One possible result of a ligand exchange reaction is partial or total substitution of surface ligands without altering the total formula of the parent cluster29,30. The other one is the complete change of cluster size, the so-called ligand-exchange-induced size/structure transformation process, which has been applied to discover new cluster species16,31. However, all the above methodologies have not addressed an important challenge to precisely control the number of surface ligands (m value) by adding/removing a single ligand at a time for a given number of metal atoms (n value).
To meet the challenge, here we successfully realized the addition and elimination of a surface ligand in thiolate-protected gold nanoclusters based on [Au25SR18]−, the flagship cluster of the [MnSRm]q family. We demonstrated the reversible conversion between water-soluble [Au25SR18]− and [Au25SR19]0 nanoclusters with identical thiolate ligand through an oxidative etching/reduction cycle (Fig. 1). Detailed evidence from electrospray ionization mass spectrometry (ESI-MS) indicated a continuous oxidation process of the as-prepared [Au25SR18]− (N* = 8) to [Au25SR18]0 (N* = 7), and then to [Au25SR18]+ (N* = 6). [Au25SR18]+ nanoclusters then reacted with an excess thiolate ligand to form a new isoelectric species, [Au25SR19]0 (N* = 6), realizing the addition of one thiolate ligand to the original nanocluster. The reverse process can be realized by carbon monoxide (CO)-reduction reaction to eliminate one thiolate ligand in [Au25SR19]0 and regenerate [Au25SR18]−.
Results
Synthesis of Au nanoclusters
[Au25(MHA)18]− (MHA = 6-mercaptohexanoic acid) was selected as the model cluster in the oxidative etching exploration. The as-prepared sample clearly shows characteristic absorption peaks of [Au25SR18]– (Fig. 2a, 400, 440, 543, 675, and 800 nm)32. Electrospray ionization mass spectrometry (ESI-MS) also indicates the successful synthesis of [Au25(MHA)18]− species (Fig. 2c). Note that purification was needed before ESI-MS tests, during which the partial oxidation of [Au25(MHA)18]− already took place. As a result, the species captured in ESI-MS were from a mixture of [Au25(MHA)18]− and [Au25(MHA)18]0.
Oxidative etching exploration and product identification
The as-prepared [Au25(MHA)18]− nanoclusters were then dialyzed (with a dialysis membrane of molecular weight cut-off of 5000 Da) and the pH was lowered to 9.0 ± 0.2 to accelerate the oxidation (see Supplementary Fig. 1). The characteristic absorption peaks of [Au25MHA18]– disappeared completely within 24 h. Polyacrylamide gel electrophoresis (PAGE) was applied to analyze and purify the final product (Supplementary Fig. 2). The main product was separated for further characterization. UV-Vis absorption spectrum shows significantly blue-shifted absorption band edge compared to [Au25MHA18]– and characteristic absorption peaks at 440, 545, and 585 nm (Fig. 2b), indicating the formation of a new species. ESI-MS was then applied to determine its molecular formula (Fig. 2d). The isotope pattern only matched well with [Au25MHA19]0, a species with the same nuclearity but different ligand number. Thus, it seems possible to precisely adding one thiolate ligand into [Au25MHA18]–.
Mechanism of the ligand addition reaction
To further verify this addition reaction and examine its mechanism, we simplified the whole reaction system by removing the excess ligands, Au(I)-complexes and inorganic ions remained in the solution using PAGE separation. These species may cause the side reactions and the formation of by-products, and a typical dialysis may not be able to completely remove them. The absorption spectrum of the purified [Au25MHA18] species was shown in Fig. 3a.
ESI-MS was then applied to monitor the variation of [Au25MHA18] species after the long-time exposure in air. The overall spectrum indicates the high purity of [Au25MHA18] species (Fig. 3b). However, in a detailed analysis of isotopic patterns (Fig. 3c), we found that the majority of [Au25MHA18] species have been oxidized from [Au25MHA18]– (N* = 8) to [Au25MHA18]0 (N* = 7). Furthermore, we noticed an excess small peak that can only be assigned to [Au25MHA18]+ (N* = 6), product originated from the further oxidation of [Au25MHA18] species. Actually, it is the first time that the water-soluble [Au25SR18] was found to be oxidized to the valence state of +113. As no external oxidant was added to the solution to induce the reaction, the only oxidation resource in this reaction should be O2 in the air. The signals shown in Fig. 3d further support this conjecture. We clearly observed the signals which could be assigned to [Au25MHA18δ+ + Oδ−] adducts. This assignment was supported by the fact that these signals become stronger after introducing excess oxidation reagent such as H2O2 (Supplementary Fig. 3). The [Au25MHA18δ+ + Oδ−] adducts should be the intermediate in the reaction between molecular O2 and [Au25MHA18] nanoclusters to generate [Au25MHA18]+.
Further prolonging the oxidation reaction time will not increase the abundance of [Au25MHA18]+ (Supplementary Fig. 4a), indicating an equilibrium between [Au25MHA18]0 and [Au25MHA18]+ species. However, introducing reducing reagent such as CO and oxidation reagent such as H2O2 will suppress and increase the signals corresponding to [Au25MHA18]+, respectively, further confirming our assignments (Supplementary Fig. 4b and 4c). Since [Au25MHA18]+ and final product [Au25MHA19]0 have the same N* value of 6, oxidation is not needed in subsequent transformation process. At this stage, [Au25MHA18]+ reacting with one free thiol ligand will drive the isoelectric reaction to the final product [Au25MHA19]0.
Reversible conversion process
We thus introduced excess thiol ligands into the solution and monitor the transformation process by UV-vis absorption spectroscopy and real-time ESI-MS. We observed two isosbestic points in the UV-vis absorption spectra at 536 and 627 nm (Fig. 4a), which indicates a quasi-one-to-one transformation process (Supplementary Note 1). The ESI-MS spectra (Fig. 4b) also showed a gradual consuming of [Au25MHA18] species and generating of [Au25MHA19]0 without other observable intermediates. The final product was shown to be pure [Au25MHA19]0 nanoclusters (Supplementary Fig. 5). Thus, we have successfully demonstrated that one thiolate ligand can be precisely added to one [Au25MHA18]− to form a [Au25MHA19]0.
As many chemical reactions are reversible in nature, we then investigated the possibilities to precisely eliminate one ligand from [Au25MHA19]0 to [Au25MHA18]−. We were able to realize this transformation by introducing a reducing agent, CO, to [Au25MHA19]0 solution. Pure [Au25MHA18]– was formed as indicated by UV-Vis absorption and ESI-MS spectra (Supplementary Fig. 6). Furthermore, the oxidative etching of [Au25MHA18]– and reduction of [Au25MHA19]0 can be reversibly realized (Fig. 4c, d) by simply tailoring the pH of the solution and atmosphere (pH ~9, air for oxidative etching and pH ~12, CO for reduction).
Discussion
Change of ligand number on the same nuclearity will inevitably influence the structure of ligand shell and thus the properties of whole nanocluster. We try to gain further insights into differences of the ligand shell after addition/elimination of one excess thiolate ligand using tandem mass spectrometry and nuclear magnetic resonance (NMR) analysis. Tandem mass spectrometry has been widely applied in structural analysis of molecular-like clusters and shows sensitivity in analyzing the surface motifs33,34. As shown in Fig. 5a, b, the onset energy of fragmentation decreased dramatically from 20 eV of [Au25MHA18] species (dominant species: [Au25MHA18]0) to 5 eV of [Au25MHA19]0, indicating a more fragile nature of the surface structure after addition of one excess thiolate ligand. However, these two species showed a similar fragment pattern that the major fragmentation routes are the same by dissociation of one Au4SR4 unit stepwise in 1st and 2nd generation fragmentation. In addition, a less prominent 1st generation fragment of [Au25MHA19]0 by dissociation of one Au5SR5 unit has been detected, which should be the result of lengthened motif after ligand addition.
1H-NMR signals of surface protecting ligands also provide substantial information of ligand shell in metal nanoclusters35,36,37. As shown in Fig. 6, the signals of protons in MHA surface ligands can be well assigned into two sets in [Au25MHA18]− (see Supplementary Fig. 9 for assignments of the two kinds of surface ligands). Note that NaBH4 was introduced to reduce the [Au25MHA18] species to −1 state to get a more analyzable spectrum. In the spectrum of [Au25MHA19]0, the most obvious differences of the signals were the largely broadened and smoothened peaks. The broadened and featureless signals were the direct result of limited motion of surface ligands38, indicating a more rigidified ligand shell after addition of one excess thiolate ligand. Note that the peak broadening can also be the result of a distribution of isotropic chemical shift (typically observed in larger metal nanoparticles)39, a paramagnetic core (observed in metal nanoclusters with odd N* together with huge down-shift of NMR signals) and electron transfer between different oxidation states of metal nanoclusters40, which are not expected to exist in [Au25MHA19]0.
Summing up the experimental evidence above, we think that the single-ligand chemistry and the interconversion of [Au25SR18]– and [Au25SR19]0 can be described by the following two reactions:
Energetics for the two reactions can be computed by density functional theory (DFT) and help understand the thermodynamic driving force of the two reactions. To this end, a structural model for [Au25SR19]0 would be needed. Given the similar patterns in tandem mass spectra of [Au25SR18] and [Au25SR19]0, we hypothesize that they have a similar ligand shell composition. Indeed, we found that the structural model with a defective icosahedral core and lengthened Au3SR4 motif is more stable than many other isomers that we tested (Supplementary Fig. 10; see Supplementary information for computational details). We therefore used this model as our putative structure for [Au25SR19]0 when computing the reaction energetics. (Here we note that a total structure prediction for [Au25SR19]0 is still computationally demanding and beyond the scope of this work). The computed ΔE at the B3LYP/TZVP level with an implicit solvation model is −0.11 eV for reaction (1) and −4.57 eV for reaction (2), in qualitative agreement with our experimental observation. In other words, when pH is lowered, a single thiol (HSR) ligand can be oxidatively added to [Au25SR18]– under O2 with a favorable energy gain, while [Au25SR19]0 can be reduced back to [Au25SR18]– by CO at higher pH at more favorable energetics.
Besides the favorable energetic of the transformation from [Au25SR18]– to [Au25SR19]0 under the oxidative environment in the presence of free thiol ligands, [Au25MHA19]0 also shows higher resistance to oxidative etching than [Au25MHA18]– (Supplementary Fig. 11). The enhanced stability of [Au25MHA19]0 under the oxidative environment is probably due to the lengthened motifs and rigidified ligand shell, which will provide better protection to the Au(0) core and prevent the access of oxidative species (e.g., O2 and thiol radicals). Thus, we were able to obtain the pure product of [Au25MHA19]0 by the as-speculated oxidative etching reaction.
In conclusion, we successfully demonstrated a reaction cycle composed of precise addition and elimination of one thiolate surface ligand on gold nanoclusters. The addition of one thiolate ligand into the original [Au25MHA18]– nanoclusters was realized by an oxidative etching reaction. In this process, [Au25MHA18]– was first oxidized by O2 stepwise from −1 state to 0 and +1 state. The [Au25MHA18]+ then reacted with one free thiol ligand to generate [Au25MHA19]0. Tandem mass spectrometry and 1H-NMR indicated that addition of one excess ligand resulted in a ligand shell with similar composition, but more fragile and rigid. We further realized the reverse process by CO-reduction, eliminating one thiolate surface ligand and regenerating [Au25MHA18]– nanoclusters. Computed reaction energetics from DFT confirms the driving force of the ligand chemistry and the interconversion of [Au25MHA18]– and [Au25MHA19]0. The key point of such manipulation should be using a stoichiometric amount of ligands in the oxidative etching reaction, which creates a mild reaction condition to possibly stabilize the metastable products. This method provides more opportunities in discovery of ‘hidden’ species at a given nanocluster size (or metal atom number) with precisely controlled surface ligand number and surface rigidity, and generating new physical and chemical properties, such as photoluminescence and catalysis.
Methods
Materials
6-mercaptohexanoic acid (MHA), were purchased from Sigma-Aldrich. Hydrogen tetrachloroaurate(III) hydrate (HAuCl4·3H2O) was purchased from Alfa Aesar. Sodium hydroxide (NaOH) was purchased from Sigma-Aldrich. Carbon monoxide (CO, 99.9%) was obtained from Singapore Oxygen Air Liquide Pte Ltd (SOXAL). All chemicals were used without further purification. Ultrapure water (18.2 MΩ cm) was used in all the experiments. All glassware was washed with aqua regia before use.
Synthesis of [Au25(MHA)18]− nanoclusters
[Au25(MHA)18]− nanoclusters were synthesized through a CO-reduction method. In a typical synthesis, 4 mL of aqueous solution of 5 mM MHA and 0.2 mL of aqueous solution of 50 mM HAuCl4 were added into 5.8 mL of ultrapure water. After 5 min, the pH of the solution was brought up to 12.0 by dropwise adding aqueous solution of 1 M NaOH. After 30 min, CO was bubbled into the solution for 2 min. The reaction vessel was then kept airtight and the reaction was allowed to proceed for 24 h under gentle stirring (500 rpm) at room temperature. The raw product was either purified by ultrafiltration (membrane of molecular weight cut-off = 5000 Da) before testing electrospray ionization mass spectrometry (ESI-MS), or purified by dialysis (membrane of molecular weight cut-off = 5000 Da) before further oxidation reaction.
Native polyacrylamide gel electrophoresis (PAGE) separation of the Au nanoclusters
In the native PAGE experiments, Bio-Rad Mini-PROTEAN® Tetra Cell or PROTEAN® II xi Cell system was used. Stacking and resolving gels were prepared by 4 and 30 wt% acrylamide monomers (1:19), respectively. The Au nanocluster solutions were first concentrated by ultrafiltration and then mixed with glycerol to prepare the sample solutions (~10 mM based on Au atoms, 50 vol% glycerol). 2 mL of sample solution were loaded into the well. The PAGE was conducted with constant voltage of 180 V for 24 h at 4 °C. The bands were cut, crushed, and incubated in ultrapure water to obtain solutions of pure Au nanoclusters for further use. The cluster concentration was determined by inductively coupled plasma mass spectrometry (ICP-MS) measurements.
Conversion from purified [Au25(MHA)18] species to [Au25(MHA)19]0
Purified [Au25(MHA)18] species from PAGE were used. In a typical reaction, 1 equivalent excess MHA (40 μM) was introduced into the solution of [Au25(MHA)18] (~ 1 mM of [Au]). The solution pH was adjusted to 9.0 ± 0.2. Time-course absorption spectra and ESI-MS spectra were then recorded. Note that the reaction was conducted without stirring in time-course monitoring, and will be accelerated if stirring was applied (completed within 24 h).
Conversion from [Au25(MHA)19]0 to [Au25(MHA)18]− by CO reduction
The solution pH was brought up to 12.0 by an aqueous solution of 1 M NaOH. CO was bubbled into the solution for 2 min. The reaction was proceeded for 12 h airtight. The sample needs to be purified by ultrafiltration before ESI-MS test.
Characterizations
Solution pH was recorded by Mettler-Toledo FE 20 pH-meter. UV-vis absorption spectra were recorded by Shimadzu UV-1800 spectrometer. ESI-MS spectra were captured by a Bruker microTOF-Q system in negative ion mode. ESI-MS testing parameters: source temperature 120 °C, dry gas flow rate 8 L per min, nebulizer pressure 3 bar, capillary voltage 3.5 kV, and sample injection rate 3 μL per min. In ESI-MS test, the solution was directly injected without further purification unless specified. 1H-NMR spectra were recorded on Bruker 400 MHz system using D2O as solvent. Purified samples were obtained from PAGE separation and further ultrafiltration process.
Data availability
All relevant data are available from the corresponding authors on request.
References
Jin, R. C. Atomically precise metal nanoclusters: stable sizes and optical properties. Nanoscale 7, 1549 (2015).
Jin, R. C., Zeng, C. J., Zhou, M. & Chen, Y. X. Atomically precise colloidal metal nanoclusters and nanoparticles: fundamentals and opportunities. Chem. Rev. 116, 10346 (2016).
Chakraborty, I. & Pradeep, T. Atomically precise clusters of noble metals: emerging link between atoms and nanoparticles. Chem. Rev. 117, 8208 (2017).
Kurashige, W., Niihori, Y., Sharma, S. & Negishi, Y. Precise synthesis, functionalization and application of thiolate-protected gold clusters. Coord. Chem. Rev. 320, 238 (2016).
Yao, Q. F., Yuan, X., Chen, T. K., Leong, D. T. & Xie, J. P. Engineering functional metal materials at the atomic level. Adv. Mater. 30, 1802751 (2018).
Yao, Q. F., Chen, T. K., Yuan, X. & Xie, J. P. Toward total synthesis of thiolate-protected metal nanoclusters. Acc. Chem. Res. 51, 1338 (2018).
Brust, M., Walker, M., Bethell, D., Schiffrin, D. J. & Whyman, R. Synthesis of thiol-derivatized gold nanoparticles in a 2-phase liquid-liquid system. J. Chem. Soc. Chem. Commun. 0, 801 (1994).
Luo, Z. T. et al. Toward understanding the growth mechanism: tracing all stable intermediate species from reduction of Au(I)-thiolate complexes to evolution of Au25 nanoclusters. J. Am. Chem. Soc. 136, 10577 (2014).
Dreier, T. A. & Ackerson, C. J. Radicals are required for thiol etching of gold particles. Angew. Chem. Int. Ed. 54, 9249 (2015).
Walter, M. et al. A unified view of ligand-protected gold clusters as superatom complexes. Proc. Natl Acad. Sci. USA 105, 9157 (2008).
Zhu, M., Lanni, E., Garg, N., Bier, M. E. & Jin, R. Kinetically controlled, high-yield synthesis of Au25 clusters. J. Am. Chem. Soc. 130, 1138 (2008).
Shichibu, Y. et al. Extremely high stability of glutathionate-protected Au25 clusters against core etching. Small 3, 835 (2007).
Negishi, Y., Chaki, N. K., Shichibu, Y., Whetten, R. L. & Tsukuda, T. Origin of magic stability of thiolated gold clusters: a case study on Au25(SC6H13)18. J. Am. Chem. Soc. 129, 11322 (2007).
Zhu, M. Z., Eckenhoff, W. T., Pintauer, T. & Jin, R. C. Conversion of anionic Au25(SCH2CH2Ph)18- cluster to charge neutral cluster via air oxidation. J. Phys. Chem. C. 112, 14221 (2008).
Tofanelli, M. A. et al. Jahn-Teller effects in Au25(SR)18. Chem. Sci. 7, 1882 (2016).
Zeng, C. J., Chen, Y. X., Das, A. & Jin, R. C. Transformation chemistry of gold nanoclusters: from one stable size to another. J. Phys. Chem. Lett. 6, 2976 (2015).
Shen, H. et al. Highly robust but surface-active: an N-heterocyclic carbene-stabilized Au25 nanocluster. Angew. Chem. Int. Ed. 58, 17731 (2019).
Deng, G. C. et al. From symmetry breaking to unraveling the origin of the chirality of ligated Au13Cu2 nanoclusters. Angew. Chem. Int. Ed. 57, 3421 (2018).
Chai, J. S. et al. Exposing the delocalized Cu-S π bonds on the Au24Cu6(SPhtBu)22 nanocluster and its application in ring-opening reactions. Angew. Chem. Int. Ed. 58, 15671 (2019).
Gan, Z. B. et al. The fourth crystallographic closest packing unveiled in the gold nanocluster crystal. Nat. Commun. 8, 14739 (2017).
Yuan, S. F., Guan, Z. J., Liu, W. D. & Wang, Q. M. Solvent-triggered reversible interconversion of all-nitrogen-donor-protected silver nanoclusters and their responsive optical properties. Nat. Commun. 10, 4032 (2019).
Nieto-Ortega, B. & Burgi, T. Vibrational properties of thiolate-protected gold nanoclusters. Acc. Chem. Res. 51, 2811 (2018).
Huang, R. W. et al. Hypersensitive dual-function luminescence switching of a silver-chalcogenolate cluster-based metal-organic framework. Nat. Chem. 9, 689 (2017).
Shichibu, Y. et al. Photoluminescence properties of [core+exo]-type Au6 clusters: insights into the effect of ligand environments on the excitation dynamics. J. Phys. Chem. C. 123, 6934 (2019).
Chevrier, D. M. et al. Molecular-scale ligand effects in small gold-thiolate nanoclusters. J. Am. Chem. Soc. 140, 15430 (2018).
Yao, Q. F. et al. Counterion-assisted shaping of nanocluster supracrystals. Angew. Chem. Int. Ed. 54, 184 (2015).
Yoon, B. et al. Hydrogen-bonded structure and mechanical chiral response of a silver nanoparticle superlattice. Nat. Mater. 13, 807 (2014).
Heinecke, C. L. et al. Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters. J. Am. Chem. Soc. 134, 13316 (2012).
Tracy, J. B. et al. Electrospray ionization mass spectrometry of uniform and mixed monolayer nanoparticles: Au25[S(CH2)2Ph]18 and Au25[S(CH2)2Ph](18-x)(SR)x. J. Am. Chem. Soc. 129, 16209 (2007).
Ni, T. W., Tofanelli, M. A., Phillips, B. D. & Ackerson, C. J. Structural basis for ligand exchange on Au25(SR)18. Inorg. Chem. 53, 6500 (2014).
Zeng, C. J. et al. Total Structure and electronic properties of the gold nanocrystal Au36(SR)24. Angew. Chem. Int. Ed. 51, 13114 (2012).
Yuan, X. et al. Balancing the rate of cluster growth and etching for gram-scale synthesis of thiolate-protected Au25 nanoclusters with atomic precision. Angew. Chem. Int. Ed. 53, 4623 (2014).
Yao, Q. F. et al. Precise control of alloying sites of bimetallic nanoclusters via surface motif exchange reaction. Nat. Commun. 8, 1555 (2017).
Yao, Q. F. et al. Revealing isoelectronic size conversion dynamics of metal nanoclusters by a noncrystallization approach. Nat. Commun. 9, 1979 (2018).
Wu, Z. K. & Jin, R. C. Stability of the two Au-S binding modes in Au25(SG)18 nanoclusters probed by NMR and optical spectroscopy. ACS Nano 3, 2036 (2009).
Qian, H. F., Zhu, M. Z., Gayathri, C., Gil, R. R. & Jin, R. C. Chirality in gold nanoclusters probed by NMR spectroscopy. ACS Nano 5, 8935 (2011).
Salorinne, K. et al. Conformation and dynamics of the ligand shell of a water-soluble Au102 nanoparticle. Nat. Commun. 7, 10401 (2016).
Marbella, L. E. & Millstone, J. E. NMR techniques for noble metal nanoparticles. Chem. Mater. 27, 2721 (2015).
Badia, A. et al. Gold-sulfur interactions in alkylthiol self-assembled monolayers formed on gold nanoparticles studied by solid-state NMR. J. Am. Chem. Soc. 119, 11104 (1997).
Parker, J. F., Choi, J. P., Wang, W. & Murray, R. W. Electron self-exchange dynamics of the nanoparticle couple Au25(SC2Ph)18(0/1-) by nuclear magnetic resonance line-broadening. J. Phys. Chem. C. 112, 13976 (2008).
Acknowledgements
We acknowledge the financial support from the Ministry of Education, Singapore, Academic Research Grant R-279-000-580-112 and R-279-000-538-114. DFT computation was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division.
Author information
Authors and Affiliations
Contributions
J.X. and Y.C. conceived the idea and designed the experiments. J.X. supervised the project. Y.C. carried out the experiments and characterizations. V.F. and D.J. performed the DFT calculations. Y.C., J.X., and D.J. wrote the manuscript. Q.Y., T.C., and S.Z. discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Indranath Chakraborty, Hideya Kawasaki and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Cao, Y., Fung, V., Yao, Q. et al. Control of single-ligand chemistry on thiolated Au25 nanoclusters. Nat Commun 11, 5498 (2020). https://doi.org/10.1038/s41467-020-19327-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-19327-2
This article is cited by
-
Single-gold etching at the hypercarbon atom of C-centred hexagold(I) clusters protected by chiral N-heterocyclic carbenes
Nature Communications (2024)
-
Composition-dependent catalytic performance of AuxAg25-x alloy nanoclusters for oxygen reduction reaction
Nano Research (2024)
-
Facile fabrication of large-area hierarchical plasmonic cavities with broadband plasmon resonance for enhanced photocatalytic hydrogen evolution
Nano Research (2024)
-
Single thiolate replacement of metal nanoclusters
Science China Chemistry (2024)
-
The synthesis of fluorescent nanoclusters based on the etching reaction
Nano Research (2024)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.