Abstract
Light projection displays play an increasingly important role in our modern life. Core projection systems including liquid crystal displays and digital micromirror devices can impose spatial light modulation and actively shape light waves. Recently, the advent of metasurfaces has revolutionized design concepts in nanophotonics, enabling a new family of optical elements with exceptional degrees of freedom. Here, we demonstrate a light projection display technology based on optical metasurfaces, called digital metasurface device (DMSD). Each metasurface pixel in a DMSD is electrically reconfigurable with well-controlled programmability and addressability. The DMSD can not only continuously modulate the intensity of light with high contrast, but also shape the wavefront of light generated by each metasurface pixel and dynamically switch between arbitrary holographic patterns. Our approach will pave an avenue towards the development of customized light projection devices. It will also drive the field of dynamic optical metasurfaces with fresh momentum and inspiring concepts.
Similar content being viewed by others
Introduction
The fast development of nanophotonics urges breakthrough concepts and design principles to create functional devices for diverse optical applications. In particular, the advent of metasurfaces has revolutionized nanophotonics, enabling a variety of opportunities. Metasurfaces, which comprise subwavelength optical antennas in ultrathin layers, identify a class of flat optical devices with exceptional control over the propagation of light1. Over the past years, many functional metasurfaces have been demonstrated, ranging from beam deflectors2,3,4, wave plates5,6, flat lenses7,8,9, displays10,11, holograms12,13,14 to surface wave couplers15,16, and among others.
Despite the exciting progress, a specific research focus - dynamic optical metasurfaces17, which probably also provide the most important link to the real-world optical applications, still awaits endeavors. They allow for active manipulation of light beams and enable fascinating optical functions, including dynamic beam steering, focusing and shaping, as well as optical vortex generations, imaging, and sensing. Many schemes have been explored to dynamically control the metasurfaces, for instance, by mechanical18,19, chemical11,12, electrical20,21,22,23,24,25, thermal26,27, and magnetic28 external stimuli. However, the reported schemes have been mostly limited to simultaneous tuning of the resonance frequencies or amplitudes of all the metasurface antennas. They also suffer from poor device control with low-intensity modulation and narrow operating band. Thus, there is still plenty of room to advance this research focus, especially at visible frequencies.
In this work, we demonstrate a strategy to realize dynamic optical metasurfaces by tailoring their spatial frequencies via modulation of both the geometric and propagation phases at visible frequencies. In particular, we showcase electrically-controlled digital metasurface devices (DMSDs) for light projection displays. Figure 1 illustrates the general concept. The DMSD consists of metasurface pixels in an M × N array. Each metasurface pixel contains gold nanorods arranged in a rectangular lattice. In some preselected (odd or even) columns, the nanorods are covered with a dielectric material. The sample is subsequently encapsulated in a thin liquid crystal (LC) cell. The dynamic function of the metasurface pixels is enabled by electrically controlling the relative phase between the neighboring odd and even columns via LCs on the millisecond time scale. In principle, each metasurface pixel can be designed to generate a specific dynamic holographic pattern in the far field. Particularly for light projection display applications, each metasurface pixel that can be electrically switched between “1” and “0” states is individually addressed by an electrode, forming an anomalous reflection spot that can be turned on and off with high contrast in the projection screen. As a result, programmable images are dynamically generated and displayed as illustrated in Fig. 1.
Results
Mechanism of the dynamic spatial frequency modulation
To illustrate the working principle, we first describe a specific optical device, comprising i × j elements, with a discrete phase distribution profile to generate anomalous reflection in the y direction as follows:
where φij represents the phase delay from the element positioned at (i, j) and n is an integer. Thus, every element pair, formed by the two elements located in the neighboring odd and even columns differ by a phase factor of Δφ. A linear geometric phase gradient is also introduced along each column by spatially varying the orientation angle of the antennas. The detailed information can be found in Supplementary Fig. 1a. We take the spacing between the neighboring rows and columns both as 300 nm and the operating wavelength is 633 nm. After the discrete Fourier transform for such a phase profile, two frequency components can be obtained as shown in Fig. 2a. The red dot with the low-frequency component (vx, vy)/λ−1 = (0, 0.528) is located in the gray zone of the spatial frequency spectrum. It represents anomalous reflection of light with an angle of \(\theta _y = \sin ^{ - 1}\lambda v_y\) based on the generalized Snell’s law. Meanwhile, the blue dot, with the high frequency component (vx, vy)/λ−1 = (1.055, 0.528), corresponds to the excitation of evanescent waves (see Fig. 2a).
The phase factor Δφ can be utilized to readily achieve the transformation between the output propagating and evanescent waves. Figure 2b presents the calculated intensities of the low and high spatial frequency components in dependence on Δφ. With increase of Δφ, the anomalous reflection first diminishes in intensity and is gradually transformed into an evanescent wave. When Δφ reaches π, it is completely turned off due to the destructive interference between the contributions from neighboring columns. With further increase of Δφ, the reverse transformation takes place. The anomalous reflection therefore emerges again and is completely turned on, when Δφ = 2π.
It is noteworthy that the phase factor Δφ is a generalized parameter applied in the design of optical metasurfaces. It may contain contributions from the geometric phase (Δφg) of an optical antenna determined by its orientation, and/or the propagation phase (Δφp) introduced by a dielectric material of a certain thickness covering the optical antenna (see Supplementary Fig. 2). If only the Pancharatnam–Berry (PB) phase Δφg is adopted, then Δφ = Δφg = 2Δθ. Here Δθ defines the angle difference between the gold nanorods located in the neighboring odd and even columns (see the inset of Fig. 2c and Supplementary Fig. 1b). As shown by the experimental and simulated results in Fig. 2c, the intensity of the anomalously reflected light from the metasurface can be modulated by simply tuning Δφ. In particular, when Δφ = 2Δθ = π, the anomalous reflection completely vanishes.
If both Δφg and Δφp are applied (i.e., Δφ = Δφg + Δφp), extra degrees of tunability to the metasurface can be achieved. As shown in Fig. 2d, the gold nanorods on a SiO2 (100 nm)/gold mirror substrate are first embedded in a uniform spacer (green) with a refractive index of 1.5 and thickness of 50 nm. The alternating columns on the metasurface are then covered by two dielectric materials with refractive indices of na (blue) and nb (pink), respectively (see Fig. 2d). When \(\Delta \theta = \frac{\pi }{2}\), Δφg is fixed at π. By tuning na and nb, Δφp is altered accordingly. As a result, the intensity of the anomalously reflected light generated by the metasurface can be continuously modulated as demonstrated in Fig. 2e. Especially, it completely vanishes, when na = nb (see Supplementary Fig. 3).
Working principle and performance of the DMSD
Our concept can be employed to build dynamic metasurfaces for a broad range of optical functions. In particular, we demonstrate a DMSD for light projection displays. Figure 3a shows the schematic of the DMSD. An array of gold nanorods spaced by a dielectric polymer (PC403, 100 nm) resides on a gold electrode. The gold nanorods are then embedded in another layer of PC403 (50 nm) in order to eliminate the influence on the LC alignment (also see Supplementary Fig. 4). The alternating columns are covered by high-birefringence LCs (na) and PMMA (nb) trenches of thickness t, respectively. Therefore, nb is fixed in this case. Δφp can be finely tuned, when na is dynamically changed upon electric control of the LCs. To reduce ion migration, the LC cell is driven by a 1 kHz AC sine wave. The incident light (633 nm) is linearly polarized along the PMMA trenches (see Supplementary Fig. 5). There are four addressable metasurface pixels (M1–M4) fabricated on the device, which are controlled via four independent electrodes as shown by the scanning electron microscopy (SEM) image in Fig. 3b. A polyimide alignment layer is rubbed along the direction of the PMMA trenches. The LC cell is encapsulated by an indium tin oxide (ITO)-coated quartz superstrate as a shared electrode.
When the cell is switched off, the long-axis of the LC molecules are aligned along the PMMA trenches. This corresponds to the case of na = ne = 1.92 and nb = nPMMA = 1.5. By choosing an appropriate PMMA thickness, which is t = 240 nm in this case, one gets Δφ = Δφg + Δφp = 2π. This gives rise to the “1” state of the metasurface pixel and a bright anomalous reflection spot is generated in the far field. When the cell is switched on and the applied voltage (V) increases, the orientation of the LCs changes in response to the external electric field (see Fig. 3a). na decreases gradually to no = 1.53, which is approximately equal to nb = nPMMA = 1.5. As a result, Δφ = Δφg + Δφp = π. This leads to the “0” state of the metasurface pixel and thus the anomalous reflection spot disappears in the far field. With four independent metasurfaces, each representing an addressable pixel, a 4-bit DMSD is achieved. Programmable optical information (“1111”, “0111”, etc.) displayed as dynamic images on the project screen are generated by electrical control as shown in Fig. 3c (see also Supplementary Movie 1).
Figure 3d presents the intensity of the anomalously reflected light as a function of the applied voltage. It is evident that the light intensity continuously decreases, when the applied voltage increases. This results from the gradually changing na of the LCs through electric control, while nb of PMMA is fixed. The experimental observation agrees nicely with the theoretical prediction presented in Fig. 2e. Notably, an intensity modulation as high as 105:1 is experimentally achieved. The switching time is 40 and 65 milliseconds for the “0” and “1” states, respectively (see Supplementary Fig. 6). Also, there is no evident signal degradation up to 100 cycles, demonstrating excellent reversibility (see Fig. 3e). It is also worth mentioning that only the LC molecules residing in the PMMA trenches with a height of t (~λ/3) contribute to the modulation of Δφp. Therefore, the DMSD thickness can be in principle subwavelength. This is in direct contrast to the working principle of liquid crystal displays that require much thicker LC layers. Importantly, the switching rate of the DMSD can be further enhanced by optimizing the structural parameters and reducing the LC thickness.
Numeric indicator display
To further expand the capability of our DMSDs, we demonstrate a numeric indicator display, composed of seven electrically-controlled holographic segments. Figure 4a shows the photograph of the device. There are seven addressable metasurface pixels (M1–M7) on the device as presented by the SEM image in Fig. 4b. An enlarged view of one of the metasurface pixels is shown in Supplementary Fig. 7a. Each metasurface pixel is utilized to generate and switch on/off a holographic pattern, which corresponds to a segment of the numeric indicator as illustrated by the inset image in Fig. 4b. The off-axis angle information for the individual holographic patterns is indicated in Supplementary Fig. 7b. The optical setup for characterizing the device is presented in Fig. 4c. The reconstructed holographic images are projected onto a screen and captured by a visible camera. Figure 4d shows the experimental results, in which numbers from 0 to 9 (0 is not shown), corresponding to 7-bit optical information are dynamically displayed using one single device (see also Supplementary Movie 2).
Electrically-controlled dynamic holography
Due to the fact that the DMSDs can not only modulate the light intensity but also the light wavefront generated from each metasurface pixel, arbitrary holographic images can be dynamically reconstructed. A representative example is shown in Fig. 5. The metasurface is multiplexed by two sets of gold nanorods located in subunit cells I and II, respectively, to generate two independent phase profiles based on Gerchberg–Saxton algorithm (see Fig. 5a). This gives rise to two off-axis holographic images of a traffic light man, representing “stop” and “walk” signs, respectively. In both I and II, the two neighboring nanorods embedded in PC403 are placed orthogonal to each other. One of the nanorods in I or II is further covered by PMMA (nPMMA = 1.5) or hafnium dioxide (nHfO2 = 1.94, see also Supplementary Fig. 8). The SEM image of the metasurface is presented in Fig. 5b. When the applied voltage increases from 0 to 30 V, the refractive index (na) of the covered LCs is varied from ne = 1.92 to no = 1.53. At V = 0 V, subunit cell I is on (ne ≠ nPMMA), whereas II is off (ne ≈ nHfO2). The “stop” sign appears as shown in Fig. 5c (see also Supplementary Movie 3). In contrast, At V = 30 V, subunit cell I is off (no ≈ nPMMA), whereas II is on (no ≠ nHfO2). As a result, the “walk” sign shows up. At an intermediate voltage, for instance V = 5 V, both signs are visible in the far field.
Discussion
In conclusion, we have demonstrated electrically-controlled DMSDs by dynamically tailoring the spatial frequencies of the metasurfaces. Such optical devices comprise independently tunable metasurface pixels, which can be readily extended to a large number with each occupying a much smaller area. The DMSDs for light projection display applications exhibit remarkable performance with high-intensity contrast, fast switching rate on the millisecond time scale, and excellent reversibility. Importantly, our concept is universal. It works not only with LCs but also with a variety of active materials that exhibit refractive index changes upon electrical, light, thermal, or other external stimuli. Such active media include spiropyran molecules in response to light, synthesized polymers in response to pH changes, vanadium dioxide, and germanium antimony telluride in response to temperature tuning, etc. Our work will largely enrich the functionality breadth of current metasurface devices at visible frequencies, advancing the field dynamically forward.
Methods
Structure fabrication
The samples were fabricated using multi-step electron-beam lithography (EBL). First, a structural layer composed of the electrode patterns and alignment markers were defined in a double layer PMMA resist using EBL on a quartz substrate. A 5 nm chromium adhesion layer and a 100 nm gold film were deposited on the substrate using thermal evaporator followed by a lift-off procedure. Next, a 100 nm PC403 (JCR, Japan) layer was coated on the substrate. A prebaking process was first carried out to remove the solvent from the polymer by increasing the baking temperature from 90 °C to 130 °C. A longer baking process at 180 °C for 30 min was then applied. Subsequently, the substrate was coated with a double PMMA layer. Computer-controlled alignment using the gold markers was carried out to define a second structural layer composed of the nanorods. A 2 nm Cr and 30 nm Au were deposited on the substrate using thermal evaporator followed by a lift-off procedure. Next, a 50 nm PC403 layer was coated on the substrate. Finally, PMMA grating nanostructures were fabricated using EBL. The sample with HfO2 coating was achieved using EBL and e-beam evaporation followed by a lift-off procedure.
LC cell construction
A rubbed-polyimide ITO-coated glass slide was adhered to the metasurface sample using ultraviolet-cured glue (NOA 81) containing 5-μm glass spacer beads. After the glue was cured using ultraviolet light, the cell was heated to 120 °C and infiltrated with LCs (LCM1107). Phase formation of the LCs took place after cooling to room temperature.
Numerical simulations
Simulated anomalous reflection intensities from the metasurfaces were carried out using commercial software COMSOL Multiphysics based on a finite element method. Periodic boundary conditions were utilized for the super unit cell shown in Fig. 2d along the x- and y-directions. A waveguide port boundary condition was used as the excitation source that was normally incident onto the structure. The incident circularly polarized light was defined with an electric field (Ex = 1, Ey = i, Ez = 0). Perfectly matched layers were placed at the top and bottom of the simulation domain to completely absorb the waves leaving the domain. The mesh size was fixed as 10 nm in the simulation domain. The substrate was included in the simulations. The refractive index of SiO2 was taken as 1.5. The dielectric constant of Au was taken from Palik29.
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.
References
Yu, N. & Capasso, F. Flat optics with designer metasurfaces. Nat. Mater. 13, 139–150 (2014).
Yu, N. et al. Light propagation with phase discontinuities: generalized laws of reflection and refraction. Science 334, 333–337 (2011).
Huang, L. et al. Dispersionless phase discontinuities for controlling light propagation. Nano Lett. 12, 5750–5755 (2012).
Wang, K. et al. Quantum metasurface for multiphoton interference and state reconstruction. Science 361, 1104–1108 (2018).
Yu, N. et al. A broadband, background-free quarter-wave plate based on plasmonic metasurfaces. Nano Lett. 12, 6328–6333 (2012).
Wu, P. C. et al. Versatile polarization generation with an aluminum plasmonic metasurface. Nano Lett. 17, 445–452 (2017).
Rubin, N. A. et al. Matrix Fourier optics enables a compact full-Stokes polarization camera. Science 365, eaax1839 (2019).
Wang, S. et al. A broadband achromatic metalens in the visible. Nat. Nanotech. 13, 227–232 (2018).
Lin, R. J. et al. Achromatic metalens array for full-colour light-field imaging. Nat. Nanotech. 14, 227–231 (2019).
Zhu, X., Vannahme, C., Hojlund-Nielsen, E., Mortensen, N. A. & Kristensen, A. Plasmonic colour laser printing. Nat. Nanotech. 11, 325–329 (2016).
Duan, X., Kamin, S. & Liu, N. Dynamic plasmonic colour display. Nat. Commun. 8, 14606 (2017).
Li, J. et al. Addressable metasurfaces for dynamic holography and optical information encryption. Sci. Adv. 4, eaar6768 (2018).
Zheng, G. et al. Metasurface holograms reaching 80% efficiency. Nat. Nanotech. 10, 308–312 (2015).
Wen, D. et al. Helicity multiplexed broadband metasurface holograms. Nat. Commun. 6, 8241 (2015).
Huang, L. et al. Helicity dependent directional surface plasmon polariton excitation using a metasurface with interfacial phase discontinuity. Light Sci. Appl. 2, e70 (2013).
Sun, S. et al. Gradient-index meta-surfaces as a bridge linking propagating waves and surface waves. Nat. Mater. 11, 426 (2012).
Shaltout, A. M., Shalaev, V. M. & Brongersma, M. L. Spatiotemporal light control with active metasurfaces. Science 364, eaat3100 (2019).
Holsteen, A. L., Raza, S., Fan, P., Kik, P. G. & Brongersma, M. L. Purcell effect for active tuning of light scattering from semiconductor optical antennas. Science 358, 1407–1410 (2017).
Holsteen, A. L., Cihan, A. F. & Brongersma, M. L. Temporal color mixing and dynamic beam shaping with silicon metasurfaces. Science 365, 257–260 (2019).
Zeng, B. et al. Hybrid graphene metasurfaces for high-speed mid-infrared light modulation and single-pixel imaging. Light Sci. Appl. 7, 51 (2018).
Bartholomew, R., Williams, C., Khan, A., Bowman, R. & Wilkinson, T. Plasmonic nanohole electrodes for active color tunable liquid crystal transmissive pixels. Opt. Lett. 42, 2810–2813 (2017).
Decker, M. et al. Electro-optical switching by liquid-crystal controlled metasurfaces. Opt. Express 21, 8879–8885 (2013).
Buchnev, O., Ou, J. Y., Kaczmarek, M., Zheludev, N. I. & Fedotov, V. A. Electro-optical control in a plasmonic metamaterial hybridised with a liquid-crystal cell. Opt. Express 21, 1633–1638 (2013).
Li, S.-Q. et al. Phase-only transmissive spatial light modulator based on tunable dielectric metasurface. Science 364, 1087–1090 (2019).
Wu, P. C. et al. Dynamic beam steering with all-dielectric electro-optic III–V multiple-quantum-well metasurfaces. Nat. Commun. 10, 3654 (2019).
Yin, X. et al. Beam switching and bifocal zoom lensing using active plasmonic metasurfaces. Light Sci. Appl. 6, e17016 (2017).
Choi, C. et al. Metasurface with nanostructured Ge2Sb2Te5 as a platform for broadband-operating wavefront switch. Adv. Opt. Mater. 7, 1900171 (2019).
Zubritskaya, I., Maccaferri, N., Inchausti Ezeiza, X., Vavassori, P. & Dmitriev, A. Magnetic control of the chiroptical plasmonic surfaces. Nano Lett. 18, 302–307 (2018).
Palik, E. D. Handbook of Optical Constants of Solids (Elsevier, 1998).
Acknowledgements
We thank the 4th Physics Institute at the University of Stuttgart for kind permission to use their electron-gun evaporation system. We thank Dr. Y. B Guo for help with the sample processing as well as Prof. N. Fruehauf and Dr. P. Schalberger for helpful discussions. This project was supported by the European Research Council under the H2020 programme (grant Nos. 638001 and 648783).
Author information
Authors and Affiliations
Contributions
J.X.L. and N.L. conceived the project. P.Y. and S. Z. provided crucial suggestions to the main concept of the project. J.X.L. performed the experiments and theoretical calculations. All authors discussed the results, analyzed the data, and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Byoungho Lee and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, J., Yu, P., Zhang, S. et al. Electrically-controlled digital metasurface device for light projection displays. Nat Commun 11, 3574 (2020). https://doi.org/10.1038/s41467-020-17390-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-17390-3
This article is cited by
-
Vectorial liquid-crystal holography
eLight (2024)
-
Environmental permittivity-asymmetric BIC metasurfaces with electrical reconfigurability
Nature Communications (2024)
-
Advancing from scalar to vectorial liquid crystal holography: a paradigm shift
Light: Science & Applications (2024)
-
Continuous manipulation of electromagnetic radiation based on ultrathin flexible frequency coding metasurface
Scientific Reports (2024)
-
Recent advancements of metalenses for functional imaging
Nano Convergence (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.