Publisher Correction: Pore elimination mechanisms during 3D printing of metals

Correction to: Nature Communications, published online 12 July 2019.

The original version of this Article contained an error in Fig. 4. The x-axis labels in Fig. 4a, b were incorrectly labelled ‘Diameter (mm)’, rather than the correct ‘Diameter (µm)’. This has been corrected in both the PDF and HTML versions of the Article.

Author information



Corresponding authors

Correspondence to Tao Sun or Lianyi Chen.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Hojjatzadeh, S.M.H., Parab, N.D., Yan, W. et al. Publisher Correction: Pore elimination mechanisms during 3D printing of metals. Nat Commun 10, 4506 (2019).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.