Conventional machines rely on rigid, centralized electronic components to make decisions, which limits complexity and scaling. Here, we show that decision making can be realized on the material-level without relying on semiconductor-based logic. Inspired by the distributed decision making that exists in the arms of an octopus, we present a completely soft, stretchable silicone composite doped with thermochromic pigments and innervated with liquid metal. The ability to deform the liquid metal couples geometric changes to Joule heating, thus enabling tunable thermo-mechanochromic sensing of touch and strain. In more complex circuits, deformation of the metal can redistribute electrical energy to distal portions of the network in a way that converts analog tactile ‘inputs’ into digital colorimetric ‘outputs’. Using the material itself as the active player in the decision making process offers possibilities for creating entirely soft devices that respond locally to environmental interactions or act as embedded sensors for feedback loops.
Nature abounds with soft, functional materials that, to date, have few synthetic analogs. For example, eyes (adaptive optics), skin (multimodal sensing and self-healing), nerve networks, and brains (computation) are built entirely from soft materials. Other entirely soft organisms, such as cephalopods, can change color and have nervous systems capable of localized responses to sensory inputs without the need for centralized processing (i.e., the brain). There is great interest in trying to mimic these functions synthetically using soft materials. Applications include soft robotics (for human assistance, prosthetics, and disaster response), human–computer interfaces, passive displays, adaptive surfaces for camouflage, and electronic skins.
This paper demonstrates that silicones innervated with liquid metal circuits—which are completely soft and stretchable—are capable of a variety of interesting functions based on the ability to direct (or locally redirect) electrical energy through these dynamic circuits. As an output, we use the energy to bring about color change due to the importance of visual cues, although in principle the energy could be used for other applications. These soft systems are capable of a variety of interesting bio-mimetic capabilities motivated herein, but perhaps the most interesting is the ability to perform “soft tactile distributed logic” in which the soft materials are themselves the active player in decision-making.
To understand this concept, consider that many physical systems—both natural and artificial—utilize sensors to gather information that must be processed to decide a response (so-called “sense-decide-respond” control loops)1. In humans, for example, nerve networks send sensory information to the brain, which processes the information to determine a response (muscle contraction). Likewise, machines (e.g., robots) utilize arrays of sensors that connect to a central computer, which processes the information before calculating a response. Both cases involve a central processor and complex “wiring” to connect all the components that limits scaling. There are exceptions. In humans, for example, reflexes bypass the brain to achieve a rapid, albeit less sophisticated response. In the octopus, neural ganglia process sensory data within their arms, avoiding the need to send information to the brain. In fact, the octopus has more than a majority of its neurons in its arms2. In machines, simple switches (e.g., a thermostat) can provide direct feedback control without a central processor, in which case the sensor is also the physical switch, yet a switch only provides a localized, yes/no response. Others have elegantly used materials-strategies, including origami1, microfluidics3,4, light-responsive compounds5, and dielectric elastomers6,7,8 to demonstrate logic, coupled dynamics, and feedback loops without the need for solid-state electronics. The approach here is distinguished by its simplicity, use of entirely soft materials, and ability to use sensory inputs (touch) to create visual outputs in which the logic occurs at the materials level without the need for semiconductors.
Here, we show that innervation of liquid metal (EGaIn, 75% Ga, 25% In by weight, melting point 15.7 °C)9 within elastomers (polydimethylsiloxane, PDMS) can serve a variety of functions, including “soft tactile logic”. Joule heating of the liquid metal can deliver thermal energy locally to thermochromic species within the elastomer for color changing passive displays, camouflage, and dynamic surfaces. These circuits benefit from the ability of the liquid metal to change geometry in response to strain and pressure10,11. This coupling of Joule heating to touch and deformation allows these dynamic composites to detect touch and strain. In more complex circuits, touch redistributes electrical current through these soft, embedded networks, inducing color change (a visual, digital output) via Joule heating. The color change can occur locally or distally depending on the design of the circuit. This concept is simple, avoids the use of a processor, and utilizes completely soft materials with mechanical properties similar to tissue (and thus, should be compatible with stretchable electronics and soft robotics). Although the output here is color, this conceptual platform provides a mechanism for redistributing energy throughout a material.
Establishing the platform
We begin by demonstrating the basic platform as a tool to achieve color change. Natural organisms use color change for camouflage and expression, and do so using entirely soft materials12,13. Color change provides various benefits to different animal species such as the mandrill (for showing excitement), dart frog (to warn predators), and chameleons and cephalopods (for hiding from predators)14,15,16. Humans also rely on color change in high-tech electronics (monitors and displays) as a primary means of human–computer interfaces17,18. Color change can also communicate information, such as emotion in the case of skin tone (e.g., blushing with embarrassment or going pale with fear)19,20.
Whereas displays (including stretchable light-emitting diodes (LEDs))21 often use “active strategies” that rely on light generation, most animals utilize “passive strategies” in which ambient light (e.g., sun light) reflects off a surface to the human eye. A variety of strategies exist to replicate passive color change in synthetic systems, such as thermochromic liquid crystals22,23 or pigments24,25, colored fluids pumped through microchannels26,27, thin film interference28, dynamic photonic crystals and plasmonic structures29,30,31,32, magnetically responsive materials33, and electrochromic molecules34. Here, we use thermochromic pigments.
Figure 1a shows the basic platform. Liquid metal is patterned between two layers of PDMS, one transparent and one containing thermochromic species. The transparent layer is not critical for the device, but it allows visualization of the metal. Passing current through the liquid metal generates Joule heating and the thermochromic species alter their colors above critical temperatures due to the molecular structure rearrangement (molecular structures shown in Supplementary Fig. 1).
To demonstrate this principle, we mixed a temperature-sensitive rose red TF-R1 thermochromic species in PDMS (Sylgard-184 with 1.2 wt% red). This device shows red color initially, yet becomes white when the temperature exceeds 28 °C (see Supplementary Movie 1). An IR image (inset of Fig. 1b) shows the elevated-temperature regions, which corresponds to the observed visual pattern (Fig. 1b). The mechanism of color change is similar to that of leuco dyes35,36,37. The ability to create patterns of color suggests this approach may be useful for soft, passive displays.
This concept can work with a variety of colors. For example, we used blue thermochromics (0.8 wt% crystal violet lactone in Sylgard-186). This device is blue at room temperature but changes to white beyond 37 °C (see Fig. 1c and Supplementary Movie 2). Note that the device does not change color in the regions where we inserted copper wire connections because the resistivity of copper (1.68 × 10−6 Ω cm) is lower than the resistivity of liquid metal (EGaIn: 29.4 × 10−6 Ω cm)38, and therefore generates less Joule heating than EGaIn.
Since the thermochromic components have different response temperatures, mixing two species generates a new system that displays three color states, which offers a broader color pallet and more complexity (Fig. 1d). The temperature map in Fig. 1d indicates the ability to go from purple (T < 28 °C), to blue (purple changes to blue in the absence of red, from 28 °C < T < 37 °C), and finally white (in the absence of blue and red, T > 37 °C). Figure 1d shows an example of such color change that occurs with increased current (see Supplementary Movie 3; the width of liquid metal wire is 0.4 mm).
To understand the power required to achieve these changes in color, we reasoned that Joule heating generates power (P) based on the applied current (I) and the resistance of liquid metal (R) according to P = I2R. Since the resistance depends inversely on the width of the channel, we performed experiments in which we held all of the geometric parameters constant while varying the width of the channels (Fig. 1e inset picture). We varied the current and measured the maximum surface temperature of the surface using an IR camera. As shown in Fig. 1e, the temperature is a linear function of the current squared for a given geometry, as expected (for more data, see Supplementary Figs. 2 and 3). For a given current, decreasing the width of the liquid metal increased the temperature change due to increased Joule heating (see Supplementary Figs. 4 and 5 for information on geometry).
Increasing the current not only increases the maximum surface temperature, but also increases the area experiencing elevated temperatures on the surface. We measured the width of the color change area of each device to construct the link between current and the width of color change area (see Supplementary Fig. 5). Increasing the current density—either through increased current or reduced width of the liquid metal—caused the color-changing regions to widen. The width of these regions agrees with thermal modeling done using COMSOL finite element simulations (see Supplementary Figs. 6 and 7; more information about modeling see Supplementary Note 1). Taken in sum, these results underscore the relation between geometry and Joule heating for a given current.
Camouflage. The ability to change color offers the possibility of camouflage. Many animals use camouflage to blend in with their surroundings39,40. Using the principles from Fig. 1a, we sought to demonstrate an elastomer that can change color to match the background. We put the device against various background colors (Fig. 1f). Adjusting the current through a serpentine of liquid metal adjusts the color to match the background (see Supplementary Movie 4). It is possible to use a broader pallet of colors by patterning the thermochromic species within the elastomer (Fig. 1g). While individual colors disappear sequentially with increased current, some thermochromic species reveal color with increased current (see Supplementary Movie 5).
The use of liquid metal for Joule heating is interesting because the dimensions of the conductor change during deformation. The ability of liquid metal wires to change shape, and thus resistance during elongation offers the opportunity to create dynamic Joule heating properties. Thus, these circuits can thermochromically report on the state of deformation. This approach has similarities to mechanochemistry, in which molecules are designed to react (and often change color) in response to stress. Mechanochemistry has been utilized in soft robotics and soft electronics to achieve color change and warn users of impending mechanical failure41,42. The system here can do the same, but does not require any special chemistry and has multiple colorimetric outputs, whereas mechanochemistry typically only provides a single color change at a single stress (or strain). Because color change here is driven thermally, yet is triggered mechanically, we refer to it as thermomechanochromism.
As a simple implementation, straining a liquid metal wire causes its length to increase, while simultaneously decreasing its cross section area. When the cross-section of a wire narrows, the resistance increases and thus the Joule heating increases, as shown conceptually in Fig. 2a. According to geometric considerations, strain (ɛ = (L − L0) L0−1, where L is the length) enlarges the resistance from its initial value (R0) following Eq. (1):
We utilized this special feature to create a sensor that changes color in response to strain. The resistance of a liquid metal wire increases with elongation, as expected (Fig. 2b). We applied a constant current of 0.2A while stretching (see Supplementary Movie 6). This current is insufficient to cause color changes at zero strain, but as the wire elongates, the Joule heating increases and color change occurs. Figure 2c shows photographs of 0.2 mm wide liquid metal wires at various strains. The device changes from purple to blue due to the absence of red coloration (at temperatures >28 °C) and it further switches from blue to white at 60% strain due to the activation of the blue thermochromic components. The device becomes purple again when returned to 0% strain due to the reversible thermochromism. This demonstration shows the possibility of achieving multiple, step-wise color changes via stretching and also sensing strain via the width (and color) of the color profile. Whereas others have realized strain-sensitive color changing materials using molecular strategies to achieve color change (e.g., mechanochemistry or block copolymers)41,43, here the strategy has the appeal of being more general since it does not rely on mechanochemistry. It does, however, require energy dissipation (electrical current).
Eq. (2) shows that the change in power (P) with strain (ε) depends on the current (I, which is constant in these experiments) and the initial resistance. Thus, Eq. (2) predicts that liquid metal wires with higher initial resistance will be more responsive to stretching. To confirm this expectation, we fabricated linear conductors 35 mm long, 0.05 mm tall and X mm wide (X = 0.2, 0.3, 0.4, 0.5, and 1.0) and then measured the width of the color change area while applying constant current (see Supplementary Fig. 8a). The trends in Supplementary Fig. 8a confirm that devices with narrower liquid metal wires change change color at lower strains. Conversely, the widest device never becomes white even at 180% strain because of its low initial resistance. This result indicates that it is possible to tune the device by adjusting initial resistance so that the color change happens at a particular value of strain (here, we adjust initial resistance by changing the width of the channel, but the height could also be varied). In contrast, molecular strategies typically evoke a single color change a specific stress or strain (defined by the mechanochromic molecules themselves, such as spiropyran).
Current is another factor which affects the color change responsiveness, according to Eq. (2). We applied currents of 0.2, 0.3, and 0.4 A on a device with 1 mm wide liquid metal (see Supplementary Fig. 8b). The device does not change to white during elongation using 0.2 A. After increasing the current to 0.4 A, the device can change color at low strain (≈50%). This observation confirms that it is also possible to use current to control the strain where color change occurs.
Soft tactile sensing
Compression is another way to change the dimensions of microfluidic channels. This type of deformation has been used previously to create touch sensors that electrically sense changes in the resistance or capacitance of liquid metal wires10,11,44,45. We reasoned the changes in the cross area of the microfluidic channel arising from compression could induce local color change by changing the local resistance (if the current is held constant). Geometric considerations predict resistance should scale with cross sectional area as Area−1. We applied 0.1 A current to a device and pressed it with 100, 200, 300, and 400 kPa pressures at intervals of 15 s over an area of 1 × 1 cm2. The device changed color locally where we applied pressure. The pressed area changed from purple to blue at 100 kPa. The compressed area changed to white when the pressure was 200 kPa (see Supplementary Movie 7). In principle, tuning the modulus of the elastomer could change the pressure sensitivity.
We sought to demonstrate how the current and the width of liquid metal affects the color response to compression. We fabricated a microfluidic channel 50 mm long, 0.05 mm tall, and X mm wide (X = 0.2, 0.3, 0.4, 0.5, and 1.0). We applied 0.1, 0.2, and 0.3 A current on a device with a 1 mm wide liquid metal trace and measured the color as a function of pressure (Fig. 2e). The ranges of pressure values where purple and blue exist narrow with increased current.
Soft tactile logic using materials-based principles
In Fig. 2d, e, there is a single conductive path. Thus, pushing the circuit changes the local resistance and increases the local current density since the current must pass through the depressed region. However, it is also possible to design circuits with multiple paths for current. This concept can be utilized to redistribute energy in a circuit and achieve simple logic operations without the use of semiconductors.
We fabricated a circuit to demonstrate “soft tactile logic” (Fig. 3a). This device consists of two “input” areas (labeled as A and B in Fig. 3a) and one “display” area (labeled as C). Here, the input signals are pressure. Similar to a threshold voltage in a transistor, there is a threshold pressure required to induce a sufficient current to cause color change in the “display region”. Following the language of binary logic, pressures above a threshold are called “1” and pressures below are a “0”. We applied 0.4 A current and input various “1” and “0” pressure signals to regions A and B. Region C responded to the input by changing the color between purple, blue, or white (see Fig. 3b and Supplementary Movie 9). These changes in color are due to the redirection of electrical current to Region C based on the physical input (see Supplementary Fig. 10). This simple device is a NAND-like logic operation, although the output is complicated by three output states rather than two. It is possible to extend this concept to parallel ‘shunt’ circuits that redistribute current when pressed (see Supplementary Fig. 9, Supplementary Movie 8 and Supplementary Note 2). In addition to causing Joule heating, the redistributed current can also turn on circuit elements (such as LEDs, as shown in Supplementary Movie 10 and Supplementary Fig. 11) or mechanical elements (such as a fan, as shown in Movie 11 and Fig. 12).
The results of Fig. 3 are interesting because the logic and response are built entirely within these soft materials at the local level without the need for conventional semiconductor-based logic elements. We acknowledge that this is a modest concept demonstrator that is limited in its present form. Nevertheless, it is thought provoking to consider the concept further.
Although the concept has similarities to a variety of conventional devices and systems, it draws no perfect comparison. It is similar to a variable resistor (as well as a potentiometer, transducer, current divider, and even some original mechanical computing machines), yet it is distinguished by being built entirely from soft materials, multiplexed to achieve logic-like output, and converts analog information (pressure and current) into a “digital” visual output (which is inherently useful since humans readily interact with systems through visual cues). For these reasons, we chose the term “soft tactile logic”. It is, however, limited as a logic device in its present form because the input is mechanical, yet the output is electrical and optical (and thus, the output cannot be readily input into another circuit element).
Whereas the current here generates color change (either locally or distally, depending on the design)—which may find use in interactive displays or camouflage—the output (current) could be utilized for other purposes, such as for powering electronics (cf. Movie 10), actuators (cf. Movie 11), or stiffening mechanisms. It could also be used for local control loops to reroute electrical current in response to mechanical deformation. Thus, the ability to perform local, materials-based “morphological computation” may be useful to better control the complex body dynamics that occur in soft actuators (i.e., nonlinearity and high degrees of freedom). Similar to an octopus, there is both centralized information (in the form of applied current to the device), as well as localized information. The system also has some similarities with the reflex response loops used by humans and animals to bypass the need for central processing. The concept also has some similarities to a Venus fly trap, which utilizes “integral” inputs to determine whether it should snap shut (in other words, a single touch does not initiate the snapping, but rather, multiple touches)46,47. This type of response, called “fading memory”, is defined as “the property of a system that retains the influence of a recent input sequence within the system, which permits the integration of stimulus information over time”48; here, the integral information is heat. Finally, it has some similarities to “embodied logic”, in which the “body” (here, the elastomer and metal) itself gives the material its “intelligence”2.
Finally, the use of thermochromics does have several limitations. First, the color is triggered by temperature, thus its behavior will change depending on the baseline temperature (here, all measurements started at room temperature). Other applications of soft tactile logic will not have this issue. Second, the current necessary to cause Joule heating is significant, although we made no effort to optimize the Joule heating. Finally, due to thermal transport, the response is quite slow (seconds to tens of seconds) and the resolution of the ‘images’ are diffuse. This could be optimized or manipulated by varying the thermal transport properties of the encasing materials. There are some simple ways to increase the response time. Using silicones with high thermal conductivity can increase heat transfer49. Optimizing the geometry of thermochromic elastomers is another option to increase the response time. For example, thinner samples change temperature faster (see Supplementary Fig. 12 and Supplementary Movie 12).
In conclusion, this paper describes soft and stretchable color changing composites that serve as soft camouflage, thermo-mechanochromic strain sensing and soft tactile logic. The platform is simple, composed of only liquid metal, PDMS, and thermochromic species. In its simplest implementation, passing an electrical current through liquid metal generates Joule heating and consequently changes the color of the thermochromic components. Combining multiple thermochromic species enables a broader range of color possibilities including the ability to make dynamic coloration for passive displays or camouflage. Stretching or pressing these devices changes the cross-sectional geometry of liquid metal and therefore changes the resistance. The device can, therefore, serve as a stress (or strain) sensor by transforming the stress change to color change through variation of electrical resistance. More complex circuits can redirect electrical energy in response to touch to create soft tactile logic. The touch input (analog) generates color (digital), which can occur locally or distally via a threshold response to the input pressure. Because of the soft and stretchable properties of composites, they could potentially serve as e-skins to work with soft robots, prosthetics, and stretchable electronics.
The concept of soft tactile logic is particularly interesting because it avoids the conventional approach of using sensor arrays that connect to a central processor to achieve a response. Instead, the logic is built into the materials themselves without the need for external semiconductor devices. This offers the possibility of “distributed logic”. In addition, the response can be local or distal. Here, we demonstrated color change as the output, but the ability to redirect current through soft “nerve networks” could be used for other purposes, such as actuation, stiffening, adhesion, or feedback control. In addition, we show only the response to touch and strain but other modes of deformation may invoke unique coupled responses, such as twisting, swelling, or inflating the elastomer.
The PDMS microfluidic channels were fabricated using soft photolithography from a commercial PDMS elastomer kit (Sylgard-184 and Sylgard-186, Dow Corning). The transparent PDMS microfluidic channels were obtained by molding against a topographically patterned silicon wafer (average PDMS thickness: 1.80 mm). The colored layers of PDMS containing thermochromic species were obtained by peeling silicone from a flat dish (average thickness: 1.21 mm). After exposure to oxygen plasma, we used the sheets of thermochromic species-loaded PDMS and plain PDMS to produce a microfluidic channel into which we vacuum-filled the liquid metal50. Uncured PDMS sealed the inlet and outlet holes of the channel to assist with handling. Commercial thermochromic pigments were purchased from Shenzhen Qiansebian Pigments Co., Ltd. The thermochromic mechanism was described in the Supplementary Note 3. These pigments maintained their color “fastness” through at least 500 thermal cycles (Supplementary Fig. 14). We used an extensometer (Instron 5943) to perform strain and compression tests while measuring force. We used an IR camera (FLIR SC300-series) to record the surface temperatures. All the photographs and Movies were recorded by a camcorder (Canon VIXIA HF G20). The patterns of all the circuits are shown in Supplementary Fig. 15.
The authors declare that the data supporting the findings of this study are available within the paper [and its supplementary information files]. Data is available upon request.
Treml, B., Gillman, A., Buskohl, P. & Vaia, R. Origami mechanologic. Proc. Natl Acad. Sci. 115, 6916–6921 (2018).
Godfrey-Smith, P. et al. Minds: The Octopus, the Sea, and the Deep Origins of Consciousness. (Farrar, Straus and Giroux, 2016).
Yang, S. H., Youn, J. R. & Song, Y. S. A microfluidic binary logic device using inertia-elastic particle focusing. Curr. Appl. Phys. 18, 975–981 (2018).
Wehner, M. et al. An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature 536, 451–455 (2016).
Liu, C., Yang, D., Jin, Q., Zhang, L. & Liu, M. A chiroptical logic circuit based on self-assembled soft materials containing amphiphilic spiropyran. Adv. Mater. 28, 1644–1649 (2016).
Gisby, T. A., O’Brien, B. M. & Anderson, I. A. Self sensing feedback for dielectric elastomer actuators. Appl. Phys. Lett. 102, 193703 (2013).
O’Brien, B. M., Calius, E. P., Inamura, T., Xie, S. Q. & Anderson, I. A. Dielectric elastomer switches for smart artificial muscles. Appl. Phys. A 100, 385–389 (2010).
Carpi, F., Bauer, S. & Rossi, D. D. Stretching dielectric elastomer performance. Science 330, 1759–1761 (2010).
Dickey, M. D. Stretchable and soft electronics using liquid metals. Adv. Mater. 29, 1606425 (2017).
Park, Y.-L., Majidi, C., Kramer, R., Bérard, P. & Wood, R. J. Hyperelastic pressure sensing with a liquid-embedded elastomer. J. Micromech. Microeng. 20, 125029 (2010).
Majidi, C., Kramer, R. & Wood, R. J. A non-differential elastomer curvature sensor for softer-than-skin electronics. Smart Mater. Struct. 20, 105017 (2011).
Xu, C., Stiubianu, G. T. & Gorodetsky, A. A. Adaptive infrared-reflecting systems inspired by cephalopods. Science 359, 1495–1500 (2018).
Stuart-Fox, D. & Moussalli, A. Camouflage, communication and thermoregulation: lessons from colour changing organisms. Philos. Trans. R. Soc. Lond. B Biol. Sci. 364, 463–470 (2009).
Langkilde, T. & Boronow, K. E. Color as a signal: the relationship between coloration and morphology in male eastern fence lizards, Sceloporus undulatus. J. Herpetol. 44, 261–271 (2010).
Sutherland, R. L., Mäthger, L. M., Hanlon, R. T., Urbas, A. M. & Stone, M. O. Cephalopod coloration model I Squid chromatophores and iridophores. J. Opt. Soc. Am. A 25, 588 (2008).
Isapour, G. & Lattuada, M. Bioinspired stimuli-responsive color-changing systems. Adv. Mater. 30, 1707069 (2018).
Ye Zhang & Jia Wang. Human-computer interaction design strategy for color identification on multi-media visual interface. in 2009 IEEE 10th International Conference on Computer-Aided Industrial Design Conceptual Design 1874–1877. https://doi.org/10.1109/CAIDCD.2009.5375081 (2009).
Thurlings, M. E., van Erp, J. B. F., Brouwer, A.-M., Blankertz, B. & Werkhoven, P. Control-display mapping in brain–computer interfaces. Ergonomics 55, 564–580 (2012).
Nakajima, K., Minami, T. & Nakauchi, S. Effects of facial color on the subliminal processing of fearful faces. Neuroscience 310, 472–485 (2015).
Buechner, V. L., Maier, M. A., Lichtenfeld, S. & Elliot, A. J. Emotion expression and color: their joint influence on perceived attractiveness and social position. Curr. Psychol. 34, 422–433 (2015).
Yu, Z., Niu, X., Liu, Z. & Pei, Q. Intrinsically stretchable polymer light-emitting devices using carbon nanotube-polymer composite electrodes. Adv. Mater. 23, 3989–3994 (2011).
Seredyuk, M. et al. Room temperature operational thermochromic liquid crystals. Chem. Mater. 18, 2513–2519 (2006).
Wang, M., He, L., Zorba, S. & Yin, Y. Magnetically actuated liquid crystals. Nano Lett. 14, 3966–3971 (2014).
Yu, C. et al. Adaptive optoelectronic camouflage systems with designs inspired by cephalopod skins. Proc. Natl Acad. Sci. 111, 12998–13003 (2014).
Siegel, A. C., Phillips, S. T., Wiley, B. J. & Whitesides, G. M. Thin, lightweight, foldable thermochromic displays on paper. Lab. Chip 9, 2775–2781 (2009).
Morin, S. A. et al. Camouflage and display for soft machines. Science 337, 828–832 (2012).
Burak Uçar, A. & D. Velev, O. Microfluidic elastomer composites with switchable vis-IR transmittance. Soft Matter 8, 11232–11235 (2012).
Vatankhah-Varnosfaderani, M. et al. Chameleon-like elastomers with molecularly encoded strain-adaptive stiffening and coloration. Science 359, 1509–1513 (2018).
Miyake, G. M., Piunova, V. A., Weitekamp, R. A. & Grubbs, R. H. Precisely tunable photonic crystals from rapidly self-assembling brush block copolymer blends. Angew. Chem. Int. Ed. 51, 11246–11248 (2012).
Boyle, B. M., French, T. A., Pearson, R. M., McCarthy, B. G. & Miyake, G. M. Structural color for additive manufacturing: 3D-printed photonic crystals from block copolymers. ACS Nano 11, 3052–3058 (2017).
Wang, G., Chen, X., Liu, S., Wong, C. & Chu, S. Mechanical chameleon through dynamic real-time plasmonic tuning. ACS Nano 10, 1788–1794 (2016).
Anker, J. N. et al. Biosensing with plasmonic nanosensors. Nat. Mater. 7, 442–453 (2008).
Luo, Z., Evans, B. A. & Chang, C.-H. Magnetically actuated dynamic iridescence inspired by the neon tetra. ACS Nano 13, 4657–4666 (2019).
Nicoletta, F. P. et al. Electrochromic polymer-dispersed liquid-crystal film: a new bifunctional device. Adv. Funct. Mater. 15, 995–999 (2005).
Jin, Y., Bai, Y., Zhu, Y., Li, X. & Ge, M. Thermosensitive luminous fiber based on reversible thermochromic crystal violet lactone pigment. Dyes Pigments 146, 567–575 (2017).
Panák, O., Držková, M. & Kaplanová, M. Insight into the evaluation of colour changes of leuco dye based thermochromic systems as a function of temperature. Dyes Pigments 120, 279–287 (2015).
MacLaren, D. C. & White, M. A. Dye-developer interactions in the crystal violet lactone–lauryl gallate binary system: implications for thermochromism. J. Mater. Chem. 13, 1695–1700 (2003).
Dickey, M. D. et al. Eutectic gallium-indium (EGaIn): a liquid metal alloy for the formation of stable structures in microchannels at room temperature. Adv. Funct. Mater. 18, 1097–1104 (2008).
Hanlon, R. T. & Messenger, J. B. Adaptive coloration in young cuttlefish (Sepia Officinalis L.): the morphology and development of body patterns and their relation to behaviour. Philos. Trans. R. Soc. B Biol. Sci. 320, 437–487 (1988).
Stevens, M. & Merilaita, S. Animal camouflage: current issues and new perspectives. Philos. Trans. R. Soc. Lond. B Biol. Sci. 364, 423–427 (2009).
Barbee, M. H. et al. Mechanochromic stretchable electronics. ACS Appl. Mater. Interfaces 10, 29918–29924 (2018).
Gossweiler, G. R. et al. Mechanochemically active soft robots. ACS Appl. Mater. Interfaces 7, 22431–22435 (2015).
Sveinbjörnsson, B. R. et al. Rapid self-assembly of brush block copolymers to photonic crystals. Proc. Natl. Acad. Sci. 109, 14332–14336 (2012).
Cooper, C. B. et al. Stretchable capacitive sensors of torsion, strain, and touch using double helix liquid metal fibers. Adv. Funct. Mater. 27, 1605630 (2017).
Yin, J., Santos, V. J. & Posner, J. D. Bioinspired flexible microfluidic shear force sensor skin. Sens. Actuators Phys. 264, 289–297 (2017).
Forterre, Y., Skotheim, J. M., Dumais, J. & Mahadevan, L. How the Venus flytrap snaps. Nature 433, 421–425 (2005).
Escalante-Pérez, M. et al. A special pair of phytohormones controls excitability, slow closure, and external stomach formation in the Venus flytrap. Proc. Natl Acad. Sci. 108, 15492–15497 (2011).
Nakajima, K., Hauser, H., Li, T. & Pfeifer, R. Information processing via physical soft body. Sci. Rep. 5, 10487 (2015).
Zhou, W.-Y., Qi, S.-H., Zhao, H.-Z. & Liu, N.-L. Thermally conductive silicone rubber reinforced with boron nitride particle. Polym. Compos. 28, 23–28 (2007).
Lin, Y. et al. Vacuum filling of complex microchannels with liquid metal. Lab. Chip 17, 3043–3050 (2017).
The authors gratefully acknowledge helpful conversations with colleagues, including Alper Bozturk, Jan Genzer, Alon Gorodetsky, Denys Makarov, Rob Shepherd, Sam Stanton, and Rich Vaia. The authors thank the CSC program for support and to the NSF (CBET-1510772) and ERC ASSIST center (ERC EEC-1160483).
The authors declare no competing interests.
Peer review information Nature Communications thanks Mattheos Santamouris and other, anonymous, reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Jin, Y., Lin, Y., Kiani, A. et al. Materials tactile logic via innervated soft thermochromic elastomers. Nat Commun 10, 4187 (2019). https://doi.org/10.1038/s41467-019-12161-1
This article is cited by
Nature Electronics (2023)
Journal of Nanobiotechnology (2022)
Nature Communications (2021)