The epitranscriptomics field has undergone an enormous expansion in the last few years; however, a major limitation is the lack of generic methods to map RNA modifications transcriptome-wide. Here, we show that using direct RNA sequencing, N6-methyladenosine (m6A) RNA modifications can be detected with high accuracy, in the form of systematic errors and decreased base-calling qualities. Specifically, we find that our algorithm, trained with m6A-modified and unmodified synthetic sequences, can predict m6A RNA modifications with ~90% accuracy. We then extend our findings to yeast data sets, finding that our method can identify m6A RNA modifications in vivo with an accuracy of 87%. Moreover, we further validate our method by showing that these ‘errors’ are typically not observed in yeast ime4-knockout strains, which lack m6A modifications. Our results open avenues to investigate the biological roles of RNA modifications in their native RNA context.
In the last few years, our ability to map RNA modifications transcriptome-wide has revolutionized our understanding of how these chemical entities shape cellular processes, modulate cancer risk, and govern cellular fate1,2,3,4. Systematic efforts to characterize this regulatory layer have revealed that RNA modifications are far more widespread than previously thought, can be subjected to dynamic regulation, and can profoundly impact RNA processing stability and translation5,6,7,8,9,10. A fundamental challenge in the field, however, is the lack of a generic approach for mapping and quantifying RNA modifications, as well as, the lack of single molecule resolution11.
Current technologies to map the epitranscriptome rely on next-generation sequencing and, as such, they are typically blind to nucleotide modifications. Consequently, indirect methods are required to identify RNA modifications transcriptome-wide, which has been mainly approached using two different strategies: (i) antibody immunoprecipitation, which specifically recognizes the modified ribonucleotide5,6,12,13,14; and (ii) chemical-based detection, using chemical compounds that selectively react with the modified ribonucleotide of interest, followed by reverse-transcription of the RNA fragment, which leads to accumulation of reads that have the same identical ends8,9,15. Although these methods have provided highly valuable information, they are limited by the available repertoire of commercial antibodies and the lack of selective chemical reactivities towards a particular RNA modification16, often lack single nucleotide resolution5,6,7 or require complex protocols to achieve it17, cannot provide quantitative estimates of the stoichiometry of the modification at a given site, and are often unable to identify the underlying RNA molecule that is modified.
To overcome these limitations, third-generation sequencing technologies, such as the platforms provided by Oxford Nanopore Technologies (ONT)18 and Pacific Biosciences (PacBio)3, have been proposed as a new means to detect RNA modifications in native RNA sequences. RNA modifications can be detected using PacBio in the form of kinetic changes of reverse transcriptases, which occur when the enzyme encounters a modified RNA nucleotide19. On the other hand, RNA modifications can be identified in its native RNA context using ONT, by pulling the RNA molecules through the nanopores that are embedded in a membrane. The ONT platform relies on the measurement of disruptions in the current intensity as the RNA or DNA molecule passes through the pore, which can be used to identify the transiting nucleotides. Although ONT direct RNA sequencing is already a reality20,21, extracting RNA modification information from ONT reads is still an unsolved challenge. RNA modifications are known to cause disruptions in the pore current that can be detected upon comparison of raw current intensities — also known as “squiggles”18,20. However, current efforts have not yet yielded an efficient and accurate RNA modification detection algorithm, largely due to the challenges in the alignment and re-squiggling of RNA current intensities22,23.
As an alternative strategy, we hypothesized that the current intensity changes caused by the presence of RNA modifications may lead to increased “errors” and decreased qualities from the output of base-calling algorithms that do not model base modifications (Fig. 1a). Indeed, here we find that base-calling “errors” can accurately identify N6-methyladenosine (m6A) RNA modifications in native RNA sequences, and propose a novel algorithm, EpiNano (github.com/enovoa/EpiNano), which can be used to identify m6A RNA modifications from RNA reads with an overall accuracy of ~90%. Our results provide a proof of concept for the use of base-called features to identify RNA modifications using direct RNA sequencing, and open avenues to explore additional RNA modifications in the future.
RNA modifications alter base-called features in ONT reads
Previous work has shown that ONT raw current intensity signals, known as “squiggles”, can be subdivided into “events”, which correspond to consecutive 5-mer sequences shifted one nucleotide at a time (e.g., in the sequence AGACAAU, the corresponding 5-mer “events” would be AGACA, GACAA, and ACAAU)24,25,26,27. Therefore, to systematically identify the current intensity changes caused by the presence of a given RNA modification, perturbations of the current intensity signals should be measured and analyzed for each possible 5-mer (n = 1024).
To this end, we designed a set of synthetic sequences that comprised all possible 5-mers (median occurrence of each 5-mer = 10), while minimizing the RNA secondary structure (see the Methods section and Supplementary Note 1). We then employed direct RNA sequencing to characterize the differences of in vitro transcribed (IVT) constructs that incorporated either “m6A” instead of adenine, or unmodified ribonucleotides (Fig. 1a, Supplementary Table 1 for sequencing metrics). Comparison of the two data sets revealed that base-called m6A-modified reads were significantly enriched in mismatches compared with their unmodified counterparts (Fig. 1b, c), and that these “errors” were mainly, but not exclusively, located in adenine positions. We observed that, in addition to mismatch frequency, other metrics including per-base quality, insertion frequency, deletion frequency, and current intensity were significantly altered (Fig. 1c and Supplementary Fig. 1). Moreover, these “errors” were highly reproducible in independent biological replicates with respect to mismatch frequency, deletion frequency, per-base quality, and current intensity (Fig. 1d–g). By contrast, insertion frequencies were not reproducible across biological replicates (Supplementary Fig. 1), suggesting that this feature is likely unrelated to the presence of RNA modifications, and thus was not further considered in downstream analyses.
Base-calling “errors” can accurately predict m6A modifications
We then examined whether these observed differences would be sufficient to accurately classify a given site into “modified” or “unmodified”. For this aim, we first focused our analysis on 5-mers that matched the known m6A motif RRACH, as these would be the most relevant in which to detect m6A modifications. To reveal whether the features from m6A-modified RRACH k-mers were distinct from unmodified RRACH k-mers, we compiled the base-called features (base quality, mismatch frequency, and deletion frequency) for each position of the k-mer (−2, −1, 0, +1, and +2) (Fig. 2a, Supplementary Fig. 2), and performed principal component analysis of the features, finding that the two populations (m6A-modified and unmodified RRACH k-mers) were largely nonoverlapping (Fig. 2b). As a control, we performed the same analysis in k-mers with identical sequence context, but centered in C, G, or U (instead of A), finding that no differences could be observed between these populations (Fig. 2c), suggesting that the observed differences are m6A-specific, and not data set-specific.
To statistically determine whether these features could be used to accurately classify a given site into “m6A-modified” or “unmodified”, we trained multiple support vector machines (SVM) using as input the base-called features from m6A-containing RRACH k-mers and unmodified RRACH k-mers (see the Methods section). We first tested whether each individual feature at position 0 (the modified site) was able to classify a given RRACH k-mer into m6A-modified or unmodified. Our results show that base quality, deletion frequency and mismatch frequency alone were able to accurately predict the modification status with reasonable accuracy (70–86% accuracy, depending on the feature used) (Fig. 2d, see also Supplementary Table 2 and the Methods section). By contrast, we find that the current mean intensity values and current intensity standard deviation were poor predictors of the modification status of the k-mer (43–65% accuracy). As a control, we used the same set of features in control k-mers (i.e., those with the same sequence context, but centered in C, G, or U), finding that the features did not distinguish between m6A-modified and m6A-unmodified data sets (Supplementary Fig. 3).
To improve the performance of the algorithm, we then examined whether a combination of the features might improve the prediction accuracy, finding that the combination of the three features (base quality, mismatch, and deletion frequency) increased the accuracy of the model (88–91%) (Fig. 2e, Supplementary Table 2). We then tested whether the inclusion of features from the neighboring positions (−2, −1, +1, and +2) might further improve the model. Indeed, we find that the inclusion of neighboring features slightly improves the performance of the algorithm (accuracy = 97–99%), however, this was at the expense of increasing the number of false positives in the control k-mer set — which do not contain the modification — (Fig. 2f, Supplementary Fig. 3), suggesting that features from neighboring positions should not be employed with this model.
We should note that our current algorithm has been trained using either 100% methylated or 100% unmethylated reads; however, in in vivo data, this will likely not be the scenario. Previous studies probing the m6A modification status in individual sites have estimated that m6A methylation in mRNAs occurs only partially, with methylation ratios ranging from 6 to 80%28. Therefore, we wondered whether our algorithm would be able to detect m6A modifications on mixtures of methylated and unmethylated reads. To test this, we sampled reads from both m6A-modified and unmodified data sets and mixed them in different proportions, to achieve partial methylation ratios of 0 (unmodified), 5, 10, 25, 50, 75, 90, 95, and 100% (fully modified). We find that the algorithm performance is dependent on the proportion of methylated reads (Fig. 2g); however, we find that even at 25% of methylation ratio, our algorithm predicts m6A sites with reasonable accuracy, with an area under the curve (AUC) of 0.72 (Fig. 2g).
Trained SVM models can predict m6A modifications in vivo
To assess whether our findings could be extended to in vivo data sets, we sequenced native polyA(+)-selected RNA from S. cerevisiae wild type (wt) and ime4∆ knockout strains (Fig. 3a and see the Methods section). Ime4∆ yeast strains constitute an excellent background model to identify false positives in m6A analyses29, as the deletion of ime4 results in complete elimination of m6A. Biological triplicates of polyA(+)-selected RNA from both wt and ime4∆ strains were sequenced in independent flow cells (see the Methods section), producing more than five million sequenced reads (Supplementary Table 3).
An initial assessment of the quality of the direct RNA sequencing runs showed that these were highly replicable both in terms of per-gene counts (spearman’s rho = 0.945–0.948) and average per-read quality scores (Fig. 3b, Supplementary Fig. 4). We then used EpiNano to extract base-called features for all six samples. We first analyzed the features corresponding to ~1300 known m6A-modified RRACH sites, previously identified using antibody immunoprecipitation coupled to next-generation sequencing (m6A-Seq)29. We found that base-called features at m6A-modified RRACH sites were distinct across yeast strains (wt and ime4∆), for all three metrics analyzed (base quality, deletion frequency and mismatch frequency) (Fig. 3c). These results were consistent across biological replicates, and are in agreement with our observations using in vitro constructs (Fig. 1c). By contrast, this was not observed when comparing unmodified RRACH base-called features across yeast strains (Supplementary Fig. 5), suggesting that the observed differences were due to the presence of m6A. These results were further confirmed by individual inspection of “known” m6A-modified sites, where both increased mismatch and deletion frequencies were consistently observed in wt m6A-modified positions, but not in their corresponding ime4∆ sites (Fig. 3d).
To determine whether our trained SVM could be applied to in vivo data sets, we first investigated whether the global in vivo base-called features were consistent with those observed in vitro. We found that unmodified in vitro sequences (CC 0%) displayed similar mismatch frequencies to those observed in ime4∆ strains, which also lack m6A modifications (Fig. 3e). By contrast, m6A-modified yeast RNAs (wt) showed intermediate mismatch frequencies between fully modified (CC 100%) and unmodified (CC 0%, yeast ime4∆) sequences. Using linear regression, we estimated that the median stoichiometry of m6A modifications in wt strains was 12–30% (Fig. 3f), which is in agreement with previous works, where m6A was found to be present at levels ranging from 7 to 69% (with a median of 23%) in yeast samples30. Altogether, our results reveal that nonrandom base-called “errors” present in in vivo data sets are replicable, are in agreement with in vitro results, and are correlated with the presence of m6A RNA modifications in a given site.
We then used the SVM model, previously trained with m6A-modified and unmodified in vitro constructs, to predict the transcriptome-wide m6A modification status of yeast RRACH sites, both in wt and ime4∆ data sets. A site was kept for downstream analyses if there was at least 1 read per site in each of the six samples. This criterion was met by 61,163 RRACH sites, from which 363 had been reported as “m6A-modified”, based on Illumina sequencing29. Per-site SVM predictions for each biological replicate were then merged into a single “m6A modification score” (see the Methods section). We should note that low read coverage leads to decreased accuracy (Supplementary Fig. 6); however, we retained low coverage sites to maximize the number of sites included in the analyses. We first compared the m6A modification scores of known m6A-modified RRACH sites (n = 363) in wt and ime4∆, finding that modification scores in wt were significantly higher than those observed in ime4∆ (p = 8e–14), for the same set of sites (Fig. 3g). By contrast, modification scores of ime4∆ known m6A-modified RRACH sites (n = 363) and unknown sites in the same strain, which do not contain m6A modifications, were relatively similar (p = 0.01, Kruskal–Wallis test) (Fig. 3g). Interestingly, our method also identified significant differences in m6A modification scores when comparing wt and ime4∆ unknown RRACH sites (p = 4e–43; Fig. 3g), suggesting that there might be additional m6A-modified sites present in the transcriptome, apart from those identified using m6A-Seq29. Indeed, recent efforts using enzymatic-based m6A detection methods have reported that antibody-based methods severely underestimate the number of m6A sites30. Overall, we find that our model identifies m6A modifications in yeast data sets with an overall accuracy of 87.8%, recovering 32% (117 out of 363) of known m6A-modified sites (Supplementary Table 4 and Fig. 3h), and with a specificity of 89%.
EpiNano performance compared with current intensity-based methods
Previous efforts have attempted to identify RNA modifications from direct RNA sequencing samples by performing direct comparison of raw current intensities. This is the case of Tombo22, a software originally developed for the detection of DNA modifications in nanopore sequencing data, which has recently been extended to detect RNA modifications. Identification of modifications from raw signal typically requires a two-step process: (i) re-squiggling of the raw signal to “align” all reads mapping to the same genomic location and (ii) comparison of raw current intensities across reads or samples. First, we find that the re-squiggling step used by Tombo discards ~50% of the reads (Supplementary Table 3). From the re-squiggled reads, we find that Tombo is able to identify 220 out of the 363 known m6A-modified sites in yeast wt, thus recovering 59.6% of known sites (Supplementary Table 4). However, this increased recovery of true positives (TP) was at the expense of increased number of false positives (Tombo specificity = 69.8%; EpiNano specificity = 89%). Thus, we find that, for the same set of 61,163 sites, Tombo correctly predicts known m6A sites with an accuracy of 69% and a recovery of 59%, whereas EpiNano predicts them with an accuracy of 87% and recovery of 32% (Supplementary Table 4).
Altogether, our in vivo analyses validate our findings using in vitro m6A-modified and unmodified sequences, and confirm the use of base-calling “errors” as a proxy to identify m6A modifications in direct RNA sequencing data sets. Furthermore, our findings validate the use of in vitro constructs, transcribed with and without RNA modifications, as a valid strategy for training direct RNA sequencing base-calling algorithms, suggesting that similar approaches could be envisioned with additional data sets containing distinct RNA modifications in the future.
The human epitranscriptome is still largely uncharted. Only a handful of the 170 different RNA modifications that are known to exist have been mapped. Importantly, several of these modifications are involved in central biological processes, such as sex determination31,32,33 or cell fate transition34, and their dysregulation has been linked to multiple human diseases16,35,36, including neurological disorders37,38,39 and cancers40,41,42. Yet, our understanding of this regulatory layer is restricted to a few RNA modifications, largely due to the lack of a generic methodology to map them in a transcriptome-wide fashion.
The establishment of the ONT platform as a tool to map RNA modifications has great potential to revolutionize our understanding of the epitranscriptome, as in principle, it should be capable of identifying RNA modifications in individual RNA sequences, and with single nucleotide resolution. Such ability would allow us to study the functions of the epitranscriptome in ways that, until now, have not been possible. Unfortunately, currently there is no software available that can predict RNA modifications from direct RNA sequencing reads with sufficient accuracy, limiting the applicability of direct RNA sequencing as a tool to identify RNA modifications. To tackle this limitation, here we provide a novel strategy to identify RNA modifications from base-called features, without the need of squiggling realignments or manipulation of raw current intensity data sets.
Here we report that RNA modifications can be identified in the form of systematic and reproducible base-calling “errors” in direct RNA sequencing data sets. These “errors” can be detected in the form of altered per-base qualities, mismatch frequencies and deletion frequencies at the modified site. We find that the method accurately detects modifications both in vitro (90% accuracy) and in vivo (87% accuracy), with an overall recovery of 32% of known sites. Despite the promising results, it is important to note, however, that the current method presents several limitations as well as ample room for improvement. Firstly, our current algorithm does not predict RNA modifications in individual RNA molecules, but rather employs information from all the reads mapping to a specific site to determine whether a given position is modified or unmodified. Secondly, our algorithm does not distinguish between different types of RNA modifications (e.g., m1A vs m6A). Future work will be needed to decipher whether different types of RNA modifications can be associated to distinct “error signatures”, which could be potentially used to identify the underlying RNA modification type. Thirdly, although m6A-modified RRACH k-mers globally display altered base qualities, mismatch frequencies and deletion frequencies, we should note that the contribution of each feature varies across different k-mers. For example, we find that the presence of m6A in GGACA and GGACT k-mers mainly affects the mismatch and deletion frequency, whereas in the case of GGACC, base quality and deletion frequency are the most altered features by the presence of m6A modifications (Supplementary Fig. 7). Future models that include k-mer specific training and testing could potentially improve the accuracy of prediction of modified sites, as well as reduce the number of false positives. In this regard, we expect that by making our m6A-modified and unmodified data sets publicly available — both base-called fastq and raw fast5 — these can be employed by the community to train different machine learning algorithms (e.g., signal-based machine learning, base-caller training, etc.), and thus lead to improved m6A RNA modification base-callers for the whole community.
Overall, our results show that base-calling “errors” can be used as an accurate and computationally simple solution to identify m6A modifications, which does not require the manipulation of raw current intensities or squiggle alignments. Moreover, we extend our findings to an in vivo system, showing that our algorithm can capture m6A-dependent changes that are present in wild-type SK1 yeast strains, while these are not observed in their ime4∆ counterparts. Future work will be needed to achieve single read RNA modification detection, as well as to expand our findings to other RNA modifications.
Synthetic sequence design
Sequences were designed such that they would include all possible 5-mers, while minimizing the secondary RNA structure. For this aim, we employed the software curlcake (http://cb.csail.mit.edu/cb/curlcake/), which internally uses RNAshapes version 2.1.6 (http://bibiserv.techfak.uni-bielefeld.de/rnashapes) to predict RNA secondary structure. The final output sequence given by the software was ~10 kb long. For synthesis purposes, a total of four sequences were designed by splitting the 10 kb sequence into smaller sequences of slightly different size (2329, 2543, 2678, and 2795 bp, which we named “Curlcake 1”, “Curlcake 2”, “Curlcake 3”, and “Curlcake 4”, respectively). Each sequence was designed with an internal strong T7 polymerase promoter, an additional BamHI site at the end of the sequence, and with all EcoRV and BamHI sites removed from the sequence (Supplementary Note 1). All four sequences were synthesized and cloned in pUC57 vector using blunt EcoRV by General Biosystems. Plasmids were double digested O/N with EcoRV-BamHI-HF, and DNA was extracted with Phenol-Chloroform followed by EtOH precipitation. Plasmid digestion was confirmed by agarose gel. Digestion product quality was assessed with Nanodrop before proceeding to in vitro transcription.
In vitro transcription, capping and polyadenylation
In vitro transcribed (IVT) sequences were produced using the Ampliscribe™ T7-Flash™ Transcription Kit (Lucigen-ASF3507), using 1 µg of purified digestion product as starting material, following the manufacturer’s recommendations. ATP was replaced by N6-methyladenosine-5′-triphosphate(m6ATP) (Trilink-N-1013;) for the IVT reaction of m6A-modified RNA. IVT reaction was incubated for 4 h at 42 °C. IVT RNA was then incubated with DNAse I (Lucigen), followed by purification using the RNeasy Mini Kit (Qiagen-74104). Integrity and quality of the RNA was determined using Agilent 4200 Tapestation, to ensure that a single product band of the correct size had been produced for each IVT product (Supplementary Fig. 8). Each IVT product was 5′ capped using vaccinia capping enzyme (NEB-M2080S) following the manufacturer’s recommendations. The capping reaction was incubated for 30 min at 37 °C. Capped IVT products were purified using RNAClean XP Beads (Beckman Coulter-A66514). Poly(A)-tailing was performed using E. coli Poly(A) Polymerase (NEB-M0276S), following the manufacturer’s recommendations. Poly(A)-tailed RNAs were purified using RNAClean XP beads, and the addition of poly(A)-tail was confirmed using Agilent 4200 Tapestation (Supplementary Fig. 8). Concentration was determined using Qubit Fluorometric Quantitation. Purity of the IVT product was measured with NanoDrop 2000 Spectrophotometer (Supplementary Table 5).
Sk1 strains used in this study were SAy841 comprising a deletion of NDT80 (hereafter, referred to as “wild-type”), and SAy966, in which both NDT80 and IME4 were deleted (hereafter, referred to as “ime4∆”). These strains are characterized in Agarwala et al.43. To induce synchronous meiotic entry, cells were grown for 24 h in 1% yeast extract, 2% peptone, 4% dextrose at 30 °C, diluted in BYTA (1% yeast extract, 2% tryptone, 1% potassium acetate, 50 mM potassium phthalate) to OD600 = 0.2 and grown for another 16 h at 30 °C, 200 rpm. Cells were then washed twice with water and resuspended in SPO (0.3% potassium acetate) at OD600 = 2.0 and incubated at 30 °C at 190 rpm. Cells were isolated from SPO following 5 h and collected by 2 min centrifugation at 3000 × g. Pellets were snap frozen and stored at −80 °C for RNA extraction. Three independent biological replicates for each strain were collected.
Yeast mRNA preparation
Yeast total RNA samples were prepared using a modified protocol of nucleospin® 50RNA kit (Macherey-Nagel, cat 740955.50). Specifically, cells lysis was done in a 1.5 ml tube by adding 450 µl of lysis buffer containing 1 M sorbitol (SIGMA-ALDRICH), 100 mM EDTA and 0.45 µl lyticase (10 U/µl). The sample was incubated in 30 °C for 30 min to break the cell wall, centrifuged for 10 min at 800 × g, and the supernatant was removed. From this stage, extraction proceeded as in the protocol of the nucleospin® 50RNA kit, only substituting β-mercaptoethanol with DTT. Enrichment of polyadenylated RNA from total RNA was performed using the Oligo (dT) dynabeads mRNA-DIRECT kit (Thermo Scientific, 61012) for small mRNA amounts.
Direct RNA library preparation and sequencing
RNA library for direct RNA Sequencing (SQK-RNA001) was prepared following the ONT Direct RNA Sequencing protocol version DRS_9026_v1_revP_15Dec2016. Briefly, 800 ng of Poly(A)-tailed and capped IVT RNA — in the case of curlcakes — or 500 ng of yeast polyA + RNA were ligated to ONT RT Adapter using concentrated T4 DNA Ligase (NEB-M0202T), and was reverse transcribed using SuperScript III Reverse Transcriptase (Thermo Fisher Scientific-18080044). The products were purified using 1.8X Agencourt RNAClean XP beads (Fisher Scientific-NC0068576), washing with 70% freshly prepared ethanol. RNA Adapter (RMX) was ligated onto the RNA:DNA hybrid, and the mix was purified using 1X Agencourt RNAClean XP beads, washing with Wash buffer twice. The sample was then eluted in elution buffer and mixed with RNA running buffer (RRB) prior to loading onto a primed R9.4.1 flow cell, and ran on a GridION (MinION for the second replicate) sequencer with MinKNOW acquisition software version v1.14.1 (v.1.15.1 for the second replicate in the curlcake experiment). The sequencing was performed in independent days and machines, with two biological replicates for each “curlcake” experiment condition (nonmodified and m6A-modified RNA, total of four flow cells). Each biological replicate and condition was sequenced independently in a different flow cell. For the in vivo analysis in S. cerevisiae, three biological replicates for each yeast strain (wild type and ime4∆) were sequenced, and each biological condition and replicate was sequenced in an independent flow cell (total of six flow cells).
Base-calling, filtering, and mapping
Reads were locally base-called using Albacore 2.1.7 (ONT). Base-called reads were filtered using NanoFilt, a component from Nanopack with settings “-q 0 -headcrop 5 -tailcrop 3”, and mapped to the 4 synthetic sequences using minimap2 with the settings -ax map-ont. Mapped reads were then converted into mpileup format using Samtools version 1.4. Read basecalling and mapping metrics can be found in Supplementary Table 1 and Supplementary Table 3. For comparison, reads were also base-called with Albacore 2.3.4 and Guppy 2.3.1, finding that all base-callers showed increased mismatch frequencies in m6A-modified data sets (with the largest increased in A positions) and decreased qualities (Supplementary Fig. 6).
To extract per-site features (mean per-base quality, mismatch frequency, insertion frequency, and deletion frequency), BAM alignment files were converted to tab delimited format using sam2tsv from jvarkit. For each individual reference site, the mean quality of the aligned bases, the mismatch, insertion, and deletion frequency was computed using in-house scripts (available on github). To extract current intensity information from individual reads, the h5py (version 2.7.0) module in python was used to parse each individual fast5 file. Reference sequences were slided with a window size of 5 bp, and mean and standard deviation of current intensities was computed for each sliding window. All in-house python scripts used to extract the features described above are publicly available as part of EpiNano (github.com/enovoa/EpiNano).
The set of extracted features of both m6A-modified and unmodified “curlcakes” was used as input to train a SVM. Initial training (75% of the sites) and testing (25%) of the SVM was performed with m6A-modified and unmodified curlcake reads from one replicate (rep1). Multiple kernels (“linear”, “poly”, and “rbf”) were compared, and the best performing kernel was retained. The model was validated on new sequencing runs of IVT m6A-modified and unmodified sequences (rep2), which had not been used for initial training or testing of the SVM. The reported accuracy values refer to the predictions on replicate 2. The code to extract the set of features for machine learning from fastq and fast5 reads, the code for building the SVM models, as well as the trained SVM models, are publicly available in github (github.com/enovoa/EpiNano). We should note that a limitation in utilizing IVT to generate all possible 5-mers is that 5-mers that contain more than one “A” will contain more than one modification in the k-mer, e.g., AGACC will in fact be m6AGm6ACC, which are unlikely to occur in a biological context. Therefore, 5-mers that contained more than one A have been excluded from the analyses, as well as from the training set. Accuracy of the model has been computed as the sum of correct m6A modification predictions — correctly predicted m6A-modified k-mers (TP) and correctly predicted unmodified k-mers (true negatives, TN) — divided by the total number of k-mers tested.
Prediction of m6A modified sites in yeast using EpiNano
EpiNano was used to extract per-site features (mean per-base quality, mismatch frequency, insertion frequency, and deletion frequency) from the mapped BAM files of the six samples sequenced (WTrep1, WTrep2, WTrep3, ime4∆rep1, ime4∆rep2, and ime4∆rep3). m6A-modified RRACH sites with minimum coverage of 5 reads/site were kept and scored using the previously trained SVM model. 5-mers containing more than one “A” in the motif were discarded from downstream analyses, as these k-mers had not been included in the training sets (see above). A total of 61,163 sites were analyzed for each sample and replicate, from which 363 corresponded to “known” m6A-modified sites, which had been identified using Illumina sequencing44.
M6A modification scores for each site were computed by merging the SVM predicted probabilities across replicates. Specifically, if the probability being modified was >0.5 in all three biological replicates (s1, s2, and s3), the modification score (M) was set to 1. Otherwise, the modification score was determined by computing the mean of the probabilities (pseudocode 1). Modification scores were obtained for each site, both for wild-type and ime4∆ strains.
if (s1 ≥ 0.5 and s2 ≥ 0.5 and s3 ≥ 0.5):
M = 1
M = (s1 + s2 + s3)/3
To classify a site as “m6A-modified” or “unmodified”, we compared the modification scores of each site, obtained for each of the two strains. Specifically, modification ratio was calculated by dividing the modification score of the wild-type strains (Mwt) and the modification score of the ime4∆ strains (Mko). A site was considered to be modified if the modification ratio was >1.5 and the modification score in wild-type strains (Mwt) was greater than 0.5 (pseudocode 2).
if (Mwt/Mko) > 1.5 and Mwt > 0.5:
status = modified
status = unmodified
Accuracy of the predictions was computed as the sum of correct m6A modification predictions — correctly predicted m6A-modified k-mers (TP) and correctly predicted unmodified k-mers (TN) — divided by the total number of k-mers tested (n = 61,163). Positive predictive value was computed by dividing the number correctly predicted m6A-modified k-mers (TP) by the total number of m6A-modified k-mers included in the analysis (n = 363). The performance of EpiNano on yeast wt and ime4∆ samples can be found in Supplementary Table 4.
Prediction of m6A modified sites using Tombo
We first ran Tombo version 1.522 to align the raw signal and the base-called reads sequences (tombo resquiggle), both for wild type and ime4∆ samples. We then used the Tombo “canonical sample comparison” method (tombo model_sample_compare) to identify significant shifts in raw signals in paired data sets (wt and ime4∆) using the parameter -num-most-significant-stored 14,000,000 and -minimum-test-reads 1. M6A modification scores for each site were computed by merging the Tombo predicted probabilities across replicates. Specifically, if the probability being modified was >0.5 in all three biological replicates (s1, s2, and s3), the modification score (M) was set to 1, as previously done for EpiNano. Otherwise, the modification score was determined by computing the mean of the probabilities (pseudocode 1). A site was considered as modified if the modification score was >0.5. The performance of Tombo on yeast wt and ime4∆ samples can be found in Supplementary Table 4.
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
All code used in this work is publicly available at github.com/enovoa/EpiNano. All FASTQ files data generated in this work have been made publicly available at the GEO database under the accession code GSE124309 (“curlcakes”) and GSE126213 (yeast wild type and ime4∆). Fast5 raw data have been made publicly available in SRA under the accession SRP174366. All other data are available from the authors upon reasonable request.
The code to extract RNA modification information from direct RNA sequencing data sets, as well as all in-house python scripts used to extract the base-called features are publicly available as part of EpiNano (github.com/enovoa/EpiNano).
Zhao, X. et al. FTO-dependent demethylation of N6-methyladenosine regulates mRNA splicing and is required for adipogenesis. Cell Res. 24, 1403–1419 (2014).
Yang, X. et al. 5-methylcytosine promotes mRNA export - NSUN2 as the methyltransferase and ALYREF as an m(5)C reader. Cell Res. 27, 606–625 (2017).
Saletore, Y. et al. The birth of the epitranscriptome: deciphering the function of RNA modifications. Genome Biol. 13, 175 (2012).
Vu, L. P. et al. The N6-methyladenosine (m6A)-forming enzyme METTL3 controls myeloid differentiation of normal hematopoietic and leukemia cells. Nat. Med. 23, 1369–1376 (2017).
Dominissini, D. et al. Topology of the human and mouse m6A RNA methylomes revealed by m6A-seq. Nature 485, 201–206 (2012).
Meyer, K. D. et al. Comprehensive analysis of mRNA methylation reveals enrichment in 3′ UTRs and near stop codons. Cell 149, 1635–1646 (2012).
Delatte, B. et al. RNA biochemistry. Transcriptome-wide distribution and function of RNA hydroxymethylcytosine. Science 351, 282–285 (2016).
Carlile, T. M. et al. Pseudouridine profiling reveals regulated mRNA pseudouridylation in yeast and human cells. Nature 515, 143–146 (2014).
Schwartz, S. et al. Transcriptome-wide mapping reveals widespread dynamic-regulated pseudouridylation of ncRNA and mRNA. Cell 159, 148–162 (2014).
Liu, N. et al. N(6)-methyladenosine-dependent RNA structural switches regulate RNA-protein interactions. Nature 518, 560–564 (2015).
Novoa, E. M., Mason, C. E. & Mattick, J. S. Charting the unknown epitranscriptome. Nat. Rev. Mol. Cell Biol. 18, 339–340 (2017).
Dominissini, D. et al. The dynamic N(1)-methyladenosine methylome in eukaryotic messenger RNA. Nature 530, 441–446 (2016).
Safra, M. et al. The m1A landscape on cytosolic and mitochondrial mRNA at single-base resolution. Nature 551, 251–255 (2017).
Arango, D. et al. Acetylation of cytidine in mRNA promotes translation efficiency. Cell 175, 1872–1886 (2018). e24.
Marchand, V. et al. AlkAniline-Seq: profiling of m 7 G and m 3 C RNA modifications at single nucleotide resolution. Angew. Chem. Int. Ed. 57, 16785–16790 (2018).
Jonkhout, N. et al. The RNA modification landscape in human disease. RNA 23, 1754–1769 (2017).
Linder, B. et al. Single-nucleotide-resolution mapping of m6A and m6Am throughout the transcriptome. Nat. Methods 12, 767–772 (2015).
Garalde, D. R. et al. Highly parallel direct RNA sequencing on an array of nanopores. Nat. Methods 15, 201–206 (2018).
Vilfan, I. D. et al. Analysis of RNA base modification and structural rearrangement by single-molecule real-time detection of reverse transcription. J. Nanobiotechnol. 11, 8 (2013).
Smith, A. M., Jain, M., Mulroney, L., Garalde, D. R. & Akeson, M. Reading canonical and modified nucleotides in 16S ribosomal RNA using nanopore direct RNA sequencing. Preprint at bioRxiv https://doi.org/10.1101/132274 (2017).
Keller, M. W. et al. Direct RNA sequencing of the coding complete influenza A virus genome. Sci. Rep. 8, 14408 (2018).
Stoiber, M. H. et al. De novo identification of DNA modifications enabled by genome-guided nanopore signal processing. Preprint at bioRxiv. https://doi.org/10.1101/094672 (2017).
Loose, M., Malla, S. & Stout, M. Real-time selective sequencing using nanopore technology. Nat. Methods 13, 751–754 (2016).
Jain, M., Olsen, H. E., Paten, B. & Akeson, M. The oxford nanopore MinION: delivery of nanopore sequencing to the genomics community. Genome Biol. 17, 239 (2016).
McIntyre, A. B. R. et al. Nanopore sequencing in microgravity. NPJ Microgravity 2, 16035 (2016).
Teng, H. et al. Chiron: translating nanopore raw signal directly into nucleotide sequence using deep learning. Gigascience. 7, giy037 (2018). https://doi.org/10.1093/gigascience/giy037.
McIntyre, A. B. R. et al. Single-molecule sequencing detection of N6-methyladenine in microbial reference materials. Nat. Commun. 10, 579 (2019). https://doi.org/10.1038/s41467-019-08289-9.
Liu, N. et al. Probing N6-methyladenosine RNA modification status at single nucleotide resolution in mRNA and long noncoding RNA. RNA 19, 1848–1856 (2013).
Schwartz, S. et al. High-resolution mapping reveals a conserved, widespread, dynamic mRNA methylation program in yeast meiosis. Cell 155, 1409–1421 (2013).
Garcia-Campos, M. A. et al. Deciphering the ‘m6A code’ via quantitative profiling of m6A at single-nucleotide resolution. Preprint at bioRxiv. (2019). https://doi.org/10.1101/571679.
Haussmann, I. U. et al. m6A potentiates Sxl alternative pre-mRNA splicing for robust Drosophila sex determination. Nature 540, 301–304 (2016).
Kan, L. et al. The m6A pathway facilitates sex determination in Drosophila. Nat. Commun. 8, 15737 (2017).
Lence, T. et al. m6A modulates neuronal functions and sex determination in Drosophila. Nature 540, 242–247 (2016).
Batista, P. J. et al. m(6)A RNA modification controls cell fate transition in mammalian embryonic stem cells. Cell Stem Cell 15, 707–719 (2014).
Torres, A. G., Batlle, E. & Ribas de Pouplana, L. Role of tRNA modifications in human diseases. Trends Mol. Med. 20, 306–314 (2014).
Sarin, L. P. & Leidel, S. A. Modify or die?-RNA modification defects in metazoans. RNA Biol. 11, 1555–1567 (2014).
Weng, Y.-L. et al. Epitranscriptomic m6A regulation of axon regeneration in the adult mammalian nervous system. Neuron. 97, 313–325.e6 (2018).
Widagdo, J. et al. Experience-dependent accumulation of N6-methyladenosine in the prefrontal cortex is associated with memory processes in mice. J. Neurosci. 36, 6771–6777 (2016).
Yoon, K.-J. et al. Temporal control of mammalian cortical neurogenesis by m6A methylation. Cell 171, 877–889.e17 (2017).
Li, Z. et al. FTO plays an oncogenic role in acute myeloid leukemia as a N6-methyladenosine RNA demethylase. Cancer Cell 31, 127–141 (2017).
Dai, D., Wang, H., Zhu, L., Jin, H. & Wang, X. N6-methyladenosine links RNA metabolism to cancer progression. Cell Death Dis. 9, 124 (2018).
Liu, Z.-X., Li, L.-M., Sun, H.-L. & Liu, S.-M. Link between m6A modification and cancers. Front. Bioeng. Biotechnol. 6, 89 (2018).
Agarwala, S. D., Blitzblau, H. G., Hochwagen, A. & Fink, G. R. RNA methylation by the MIS complex regulates a cell fate decision in yeast. PLoS Genet. 8, e1002732 (2012).
Schwartz, S. et al. Perturbation of m6A writers reveals two distinct classes of mRNA methylation at internal and 5′ sites. Cell Rep. 8, 284–296 (2014).
O.B. is supported by an international PhD fellowship (UIPA) from the University of New South Wales. M.C.L. is supported by CRG International PhD Fellowships Programme. E.M.N was supported by a DECRA fellowship from the Australian Research Council (DE170100506) and is currently supported by CRG Severo Ochoa Funding. This work was funded by the Australian Research Council (DP180103571). We acknowledge the support of the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) to the EMBL partnership, Centro de Excelencia Severo Ochoa and CERCA Programme/Generalitat de Catalunya. C.E.M thanks funding from the Bert L and N Kuggie Vallee Foundation, the WorldQuant Foundation, The Pershing Square Sohn Cancer Research Alliance, NASA (NNX14AH50G, NNX17AB26G), the National Institutes of Health (R01ES021006, 1R21AI129851, and 1R01MH117406), the Bill and Melinda Gates Foundation (OPP1151054), the Leukemia and Lymphoma Society grants (LLS 9238-16, LLS-MCL-982). We would like to thank James Ferguson for all his helpful comments, as well as for giving us early access to his fast5 processing toolkit (https://github.com/Psy-Fer/fast5_fetcher).
M.S. and E.M.N. have received travel and accommodation expenses to speak at Oxford Nanopore Technologies conferences. Otherwise, the authors declare no competing interests.
Peer review information: Nature Communications thanks Brian Gregory and the other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Liu, H., Begik, O., Lucas, M.C. et al. Accurate detection of m6A RNA modifications in native RNA sequences. Nat Commun 10, 4079 (2019). https://doi.org/10.1038/s41467-019-11713-9
Journal of Biomedical Science (2021)
Molecular Cancer (2021)
Direct long-read RNA sequencing identifies a subset of questionable exitrons likely arising from reverse transcription artifacts
Genome Biology (2021)
Nature Biotechnology (2021)
Signal Transduction and Targeted Therapy (2021)