Imaging gigahertz zero-group-velocity Lamb waves


Zero-group-velocity (ZGV) waves have the peculiarity of being stationary, and thus locally confining energy. Although they are particularly useful in evaluation applications, they have not yet been tracked in two dimensions. Here we image gigahertz zero-group-velocity Lamb waves in the time domain by means of an ultrafast optical technique, revealing their stationary nature and their acoustic energy localization. The acoustic field is imaged to micron resolution on a nanoscale bilayer consisting of a silicon-nitride plate coated with a titanium film. Temporal and spatiotemporal Fourier transforms combined with a technique involving the intensity modulation of the optical pump and probe beams gives access to arbitrary acoustic frequencies, allowing ZGV modes to be isolated. The dispersion curves of the bilayer system are extracted together with the quality factor Q and lifetime of the first ZGV mode. Applications include the testing of bonded nanostructures.


Waveguides channel propagating waves with reduced losses thanks to the confined dimensions, and are widely used in optics and acoustics. They are dispersive, i.e., the phase and the group velocities differ. Zero-group-velocity (ZGV) modes are particular points in a dispersion relation where the group velocity vanishes whereas the phase velocity remains finite. These modes can be found in most waveguide geometries (e.g., fibres and cylinders1,2, plates3,4, etc.) and have the advantages of combining reduced losses and high Q factor. Many applications take advantage of these unique properties. In optics, they are, for example, implicated in soliton propagation, pulse compression and microcavity confinement1,5,6. In acoustics, they are implicated in structural testing using Lamb waves, i.e., in geometries with free-surface boundary conditions and for which the acoustic wavelength is of the same order as the thickness7. These ZGV Lamb modes offer, for instance, methods for estimating the Poisson’s ratio8, thin layer thicknesses9, elastic constants10,11, and interfacial stiffnesses between bonded plates12,13, or fatigue damage14. ZGV Lamb modes have their energy trapped within a specific lateral region, offering a local measurement. These modes can be accessed by contactless excitation and detection, achievable with air-coupled transducers3, electromagnetic acoustic transducers15 or lasers4,8,9,10,11,12,13,14, often working in the kHz–MHz range.

The observation of ZGV Lamb modes in plates has been extended up to the GHz range by the use of interdigital transducers16 or intensity-modulated continuous lasers17, but only up to ~40 MHz by the use of pulsed lasers14. Observations of GHz ZGV Lamb waves with pulsed lasers has, however, not proved possible owing to the extremely sharp resonances associated with ZGV modes—exhibiting Q factors up to 14,70018, for example—whereas acoustic frequencies are usually limited to integral multiples of the laser repetition rate. Ultrashort-pulse lasers are ideal for time-domain imaging, but to our knowledge the imaging of ZGV modes in two dimensions has not been investigated.

In this paper, we image a GHz ZGV Lamb mode in a bilayer consisting of a silicon-nitride plate coated with polycrystalline titanium by means of a time-resolved two-dimensional (2D) imaging technique incorporating an ultrashort-pulse laser19. We overcome the above-mentioned frequency limitation by the use of arbitrary-frequency control that takes advantage of the sidebands introduced by additional intensity modulation in the laser beam paths20,21. In particular, we identify and isolate the first ZGV mode, its associated Q factor and its lifetime. The experimental dispersion curves of the bilayer are obtained, clearly showing the location of the ZGV mode in frequency-wavevector space and its acoustic energy localization.


Experimental setup and theoretical model

The sample, depicted in Fig. 1a, consists of a square silicon-nitride plate (of approximate composition Si3N4) of thickness 1830 nm coated with a 660 nm sputtered polycrystalline titanium film (see Supplementary Note 2). Experiments were carried out with an optical pump-and-probe technique combined with a common-path Sagnac interferometer, that allows the possibility of imaging22. A pump optical beam focused to a micron-sized region of the sample surface (x, y) is used to excite Lamb waves, and the temporal or spatiotemporal evolution of the normal surface particle velocity is obtained with ~100 ps time-resolution with a micron-sized probe-beam spot and by varying the pump-probe delay time with a delay line. Deformations occur throughout the sample thickness (as expected for Lamb waves). For the initial experiments, the pump and probe beams are co-focused to one point on the sample, and for the later experiments the probe beam is scanned over the surface in 1D or 2D. The arbitrary-frequency technique involving the modulation of the pump beam and/or probe beam is described in detail in Methods.

Fig. 1

Sample, surface particle velocity variation, and acoustic frequency spectrum. a Schematic diagram of the sample. DM: dichroic mirror, OL: objective lens. The double-ended arrows represent the probe-beam 2D scanning realized by moving mirrors and a confocal lens pair (see Methods). b Out-of-plane surface particle velocity measured for co-focused pump and probe beams. c Zoom-in of the ZGV Lamb mode amplitude temporal evolution and fit \(\propto 1/\sqrt t\). d Frequency spectrum obtained after temporal Fourier transform. Arrows indicate the two modes imaged in Fig. 2. e Evolution of the normalized amplitude in the frequency window 1.688 ≤ f ≤ 1.692 GHz. The solid line is a fit to the experimental data in the form of the square root of a Lorentzian. The dashed line represents \(1/\sqrt 2\) (i.e., −3 dB) of the maximum amplitude of the fit

In order to facilitate the identification of a ZGV mode, we calculate the acoustic dispersion relation of our bilayer structure, making use of literature elastic constants23 as well as layer thicknesses obtained from ultrafast pulse-echo measurement (see Supplementary Notes 1 and 2 for details). The first ZGV Lamb mode is predicted to be at frequency \(f_1^{{\mathrm{th}}} = 1.7248\,{\mathrm{GHz}}\) and wavenumber \(k_{1}^{\mathrm{th}} = 0.620\,\mu{\mathrm{m}}^{ - 1}\). Two other ZGV Lamb modes below 10 GHz are predicted near 3 and 7 GHz (see Supplementary Table 1). We concentrate in this paper on the first ZGV Lamb mode, which has a significant out-of-plane acoustic displacement component (see Supplementary Fig. 2).

Detection of a GHz ZGV Lamb mode

Figure 1b shows the temporal evolution of the out-of-plane surface particle velocity at an acoustic frequency of f = 1.6900 GHz for co-focused pump and probe spots of a few microns in width on the sample (see Methods). This frequency was isolated initially by the help of the above theoretical prediction for the first ZGV resonance and subsequently by frequency tuning. A thermal background variation is subtracted using a second-order polynomial function, obtained by the least-squares method (as with all subsequent fits). This clearly reveals the ZGV resonance, a mode with a lifetime greater than the laser repetition period of ~12 ns (as explained in detail later). An enlarged view of the data is shown in Fig. 1c. Two effects contribute to the decay in amplitude. The first originates from the second-order term in the dispersion relation ω(k) in the vicinity of the ZGV resonance, where ω is the angular frequency and k the acoustic wavenumber. This produces a \(1/\sqrt t\) decrease with time t, as previously observed at lower frequencies24. The second originates from viscoelastic attenuation, yielding a decay \(\propto e^{ - t/\tau _0}\), where τ0 is the mode lifetime, and can be observed only after a certain time has passed. The amplitude decrease in the present case can be fitted to a good approximation with a \(1/\sqrt t\) function, as shown in Fig. 1c. For our time window of ~20 periods  for the ZGV mode, no exponential decrease is visible, precluding a derivation of τ0 by this method.

The experimental spectrum obtained from the combination of the different scanned frequencies is displayed in Fig. 1d (see Methods for details). Besides the strong ZGV resonance at 1.6900 GHz, other peaks are observed at 0.2391, 7.2365, 8.3594, and 8.9202 GHz, which are selected (a) owing to the choice of pump modulation frequencies, as shown in Methods, (b) because with co-focused optical pump and probe spots one only detects modes that do not leave the excitation region, i.e. modes with zero or low group velocity, and (c) because with the probe-laser normal incidence only modes with significant normal displacement are detected. The detected modes lie on the qA0, qA4, qS8 and qS5 branches of the acoustic dispersion relation, where qA refers to quasi-antisymmetric and qS refers to quasi-symmetric Lamb waves (see Supplementary Note 2). The observed ZGV mode thus corresponds to the qS1 ZGV.

The experimental \(\left( {f_1^{{\mathrm{exp}}} = 1.6900\,{\mathrm{GHz}}} \right)\) and theoretical \(\left( {f_1^{{\mathrm{th}}} = 1.7248\,{\mathrm{GHz}}} \right)\) ZGV frequencies are in reasonable agreement. The residual ~2 % mismatch may be caused either by a difference in the Si3N4 layer parameters (see Supplementary Note 2) or to imperfect adhesion between the two layers12,13. The two other ZGV Lamb modes, predicted near 3 and 7 GHz, could not be detected. This is thought to be owing to a mismatch between the probed frequencies and the ZGV frequencies (see Methods) as well as, for the 7 GHz peak, to the smaller out-of-plane surface displacement expected for this mode (see Supplementary Fig. 2).

Figure 1e shows the amplitude–frequency relation around \(f_1^{{\mathrm{exp}}}\). In order to extract the associated quality factor Q, we fit with the square root of a Lorentzian function, \(b/\sqrt {a + (f - f_0)^2}\), where a, b and f0 are fitting parameters, yielding f0 = 1.68992 GHz and Q = 1150. This of the same order of magnitude as the Q factors previously reported for thin composite silicon-nitride/metal/oxide plates suspended by thin beams and driven in thickness longitudinal resonances at similar frequencies25. For ZGV modes, Q factors up to 14,700 at MHz frequencies have been observed in other materials18,26, values which depend strongly on the ultrasonic attenuation at the frequency in question, as discussed in the next section, as well as parameters such as the possible imperfect adhesion between the two layers.

Imaging a ZGV Lamb mode

The spatiotemporal evolution of the acoustic field is obtained by scanning the probe spot in 2D over a 55 × 55 μm2 area using 301 frames (i.e., images obtained at different pump-probe delay times—see Methods). We specifically target the ZGV mode (at \(f_1^{{\mathrm{exp}}}\)) and the branch qA0 at 0.24 GHz, indicated by the two downward-pointing arrows in Fig. 1d. To eliminate unwanted frequency components, filtering of small and high wavenumbers is conducted in Fourier space. We thereby extract the amplitude field, as shown in Fig. 2a, b for f = 0.2391 and \(f_1^{{\mathrm{exp}}} = 1.6900\,{\mathrm{GHz}}\), respectively (also viewable as animations in the Supplementary Movie 1). The 1.6900 GHz data represents, to our knowledge, the first experimental 2D movie of a ZGV mode, extending the 1D observations of Laurent et al.27. Comparing the animations, one can immediately ascertain that the ZGV mode is not propagating, in striking contrast to the qA0 branch, which corresponds to propagating modes.

Fig. 2

Imaging a ZGV Lamb mode. a, b Normalized images of the measured out-of-plane surface particle velocity at a 0.2391 and b 1.6900 GHz. The x and y axis directions are shown in Fig. 1a. Animations are viewable in the Supplementary Movie 1. c 2D acoustic field at 1.6900 GHz based on a fit to a Bessel function J0(kr). d Normalized out-of-plane surface particle velocity evolution of the experimental (dots) and fitted (solid line) data as a function of radial distance for a frequency of 1.6900 GHz (dashed lines in b and c)

For a single-frequency point-excited wave in two dimensions, the radial form of the out-of-plane displacement is proportional to J0(kr), where J0 is the first-order Bessel function and r is the radial distance (see, e.g., Wright et al.28). This has previously been confirmed by theory and by simulation for ZGV Lamb modes17,24. Figure 2c shows a fit to our data at 1.6900 GHz with the function J0(kr), which gives reasonable agreement, also clear from the cross section shown in Fig. 2d. The value of k for the best fit, \(k_1^{{\mathrm{exp}}} = 0.55 \pm 0.13\,\mu{\mathrm{m}}^{ - 1}\), is in fair correspondence with the predicted value \(k_1^{{\mathrm{th}}} = 0.620\,\mu{\mathrm{m}}^{ - 1}\) from the theoretical dispersion relation. (The fit does not take into account the smoothing due to the finite spot diameters, but we verified that its effect has a negligible influence on the fitted curve.) One can notice that the experimental amplitude on the first main side lobes is slightly larger than the theoretical Bessel fitted function, which is in agreement with the results obtained by Laurent et al.27. Away from the central peak, the experimental amplitude is lower; these effects can be attributed to high-frequency material losses.

Our measurement of the Q factor (Q = 1150) and wavenumber \(\left( k_{1}^{\mathrm{exp}} = 0.55\,\mu{\mathrm{m}}^{ - 1} \right)\) for the ZGV mode at 1.6900 GHz allows an estimate of the lifetime τ0. As a first step, for a free-standing layer of a single isotropic material and considering only viscoelastic losses18,24, the spatial attenuation coefficient is given by

$$\alpha = \frac{k}{{2Q}},$$

where α is an effective attenuation coefficient (in m−1). This relation yields α = 240 m−1 for the above-mentioned ZGV mode. One can then make use of the relation τ0 = 1/(αvp), where vp is the phase velocity,  to find τ0 ≈ 0.22 μs. This is much longer than the time ~10 ns for an acoustic mode with a typical sound velocity ~5 km.s−1 to leave the imaged region of 55 × 55 μm2 in which the ZGV amplitude is significant.

The value of α obtained can be compared with other high-frequency measurements. Assuming an f2 variation in α, as expected from viscous losses, our value α = 240 m−1 lies between those extrapolated for longitudinal waves in silicon nitride (29 m−1)  and polycrystalline titanium (2300 m−1) to a frequency of 1.69 GHz29,30. A detailed comparison is difficult because ZGV modes couple both longitudinal and transverse strain components, which are distributed over the two layers (see Supplementary Fig. 2).

Dispersion curves

More complete information is available with an experimental knowledge of the Lamb-wave dispersion curves. To this end, the pump beam is focused to a micron-sized line source with a cylindrical lens (see Methods). The probe-beam spot is scanned along the direction x (>0, see Fig. 1a) perpendicular to this line source over distances up to 100 μm in 0.05 μm steps to obtain the spatiotemporal variation of the acoustic field. A 2D Fourier Transform (FT) (temporal FT and 1D spatial FT) allows the extraction of the acoustic dispersion curves, as shown in Fig. 3a for both experiment and theory, which show good agreement for the modes visible in experiment (bright regions). The positive wavenumbers in Fig. 1 correspond to waves with phase velocity along the +x direction. The three branches qA0, qS0, and qA1, observed here below ~2 GHz, are detected for a wide range of wavenumbers, unlike branches with higher frequencies, which are detected only for small wavenumbers k. The first ZGV mode is clearly observed at k = 0.54 ± 0.03 μm−1, in agreement with the value extracted in the 2D-scan experiment. The second ZGV mode, predicted at \(f_2^{{\mathrm{th}}} = 3.0024\,{\mathrm{GHz}}\) and \(k_{2}^{\mathrm{th}} = 0.732\,\mu{\mathrm{m}}^{ - 1}\) is evident at \(f_2^{{\mathrm{exp}}} = 2.972\,{\mathrm{GHz}}\) and \(k_{2}^{\mathrm{exp}} = 0.83 \pm 0.03\,\mu{\mathrm{m}}^{ - 1}\), in fair agreement. This mode may not have been observed in the previous experiment with co-focused laser beams owing to the different excited wavevector spectrum \(\left( {k_1^{{\mathrm{th}}} < k_2^{{\mathrm{th}}}} \right)\). Other peaks that were previously detected at 0.2391, 7.2365, and 8.9202 GHz are again evident on the branches qA0, qA4, and qS5, respectively. (The mode previously detected at 8.3594 MHz is absent here, and no corresponding mode appears on the dispersion relation. Its previous appearance in the spectrum of Fig. 1d seems likely to be an experimental artifact.) Some branches, such as qA2 near 3.6 GHz as well as qS0 and qA1, are revealed only in this new measurement. We attribute residual discrepancies between the theoretical and experimental dispersion curves to uncertainties in the elastic parameters and in the layer thicknesses, and to the possible imperfect layer bonding31.

Fig. 3

Dispersion curves of the bilayer. a, b Experimental (image) and theoretical (blue dashed and green dotted-dashed lines) dispersion curves for a 0 ≤ f ≤ 10 GHz and 0 ≤ k ≤ 4.5 μm−1 b at frequencies near the first ZGV mode for 1.5 ≤ f ≤ 1.9 GHz and −2.5 ≤ k ≤ 2.5 μm−1. The solid navy blue section of the dispersion curves corresponds to the portions where the phase and group velocities are anti-parallel. a The box corresponds to the enlarged region in b for k > 0. a, b Arrows indicate ZGV points. Plots are independently normalized

The dispersion curves in Fig. 3b are a magnified view of Fig. 3a, this time including negative wavenumbers corresponding to −x-directed propagation. The main features are as follows:

  1. 1.

    for the qA0, qS0 and qA1 branches and the region (ω, k) with |k| larger than that for the qS1 ZGV (the latter indicated by a downward-pointing arrow in Fig. 3a), the intensity is much greater for k > 0;

  2. 2.

    for the region (ω, k) with |k| smaller than that for the qS1 ZGV, the intensity is much greater for k < 0;

  3. 3.

    for the region (ω, k) in the vicinity of the qS1 ZGV, near wavenumber k1 and frequency f1, the intensities for k > 0 and k < 0 are comparable.


Because of the symmetry of the excitation with respect to coordinate x, acoustic waves with positive and negative k should be generated with equal amplitude and initially form a single wave packet located at the excitation point. This wave packet is eventually broadened and split because of the acoustic dispersion and the broad distribution of positive and negative values of k. Its wave components are plane-wave modes spreading over all 2D space, but in general, their sum is observable as a wave packet only if their phase constructively interferes. In other words, there are two possibilities for observing no acoustic field: a complete lack of such modes or the overlapping of several modes with random phase. (Compare the Fourier transform of a δ-function: it contains an infinite number of fully spreading plane waves, but is only finite at a point in space.) Since we observe the waves in the region x > 0, the waves we can primarily observe are restricted to those with vg ≥ 0. Waves with vg < 0 exist, but give negligible contribution to the waves we observe because we only probe for positive x values over a region with little overlap with the pump spot.

The feature (1) above can therefore be attributed to the waves having parallel group velocity vg and phase velocity vp. With reference to the dispersion curves, all k values involved in feature (1) show positive group velocity vg > 0. On the other hand, feature (2) can be attributed to the waves having anti-parallel vg and vp; the k values involved in feature (2) can be seen to be negative, but are associated with a positive slope on the ωk plot, i.e., they possess vg > 0 but with vp < 0. The feature (3) can be attributed to the waves with zero or very small group velocity. The wave packet consisting of these near-zero or zero-vg wave components remains almost stationary, and both positive and negative k components contribute to this wave packet over an extended period of time. These features are consistent with those of Philippe et al.32. In Fig. 3b, we label the part of the +k qS1 branch with the negative slope as qS2b (and qS−2b for the equivalent −k part), in agreement with its regular appellation33,34, where ‘b’ stands for backward wave. All other branches with finite positive group velocity are observed only for k > 0, with the exception of qS5 near 9 GHz, for which vg is small for low k, and this branch is observed for both positive and negative k with similar amplitude. Only the branch containing the ZGV point at 1.6900 GHz has a greater amplitude for negative k compared with that for positive k.

In conclusion, we image a zero-group-velocity Lamb mode in the time domain. We apply an ultrafast time-domain technique with arbitrary GHz-acoustic frequency control to a nanoscale bilayer consisting of a silicon-nitride plate coated with a titanium film to provide this observation at unprecedented frequencies in the GHz range. Our combination of both time-domain 1D and 2D optical scanning methods provides a comprehensive probe for the ZGV dynamics. We isolate the qS1 ZGV mode at ~1.7 GHz and probe its spatial and temporal characteristics, including its Q factor ~1000. The spatial form of this quasi-point-excited ZGV is directly verified by Fourier analysis to correspond closely to the expected Bessel function in 2D, allowing its wavenumber to be derived and its ZGV nature to be directly verified in the time domain from its relatively long lifetime ~0.2 μs. Experimental dispersion curves of this bilayer system are also obtained, and show good agreement with a theoretical model and reveal another ZGV mode.

Applications of real-time imaging of ZGV Lamb modes include the detection of defects in adhesion and deviations in interfacial stiffnesses, so this high-frequency imaging technique should provide new avenues for evaluating and quantifying the mechanical integrity of nanostructures. In particular, our approach allows the probing of nanolayers. One example is the measurement of interfacial adhesion in two- or multi-layer nano-membrane systems. ZGV modes have already proven efficient in the determination of interfacial adhesion in layers of thickness in the mm range12,13, so our work should encourage research into the evaluation of both normal and tangential interfacial adhesion in ultrathin multilayers of thickness in the nm range, complementing other GHz approaches to nanolayer adhesion metrology based on picosecond ultrasonics35,36,37.

Moreover, since the use of finely-controlled arbitrary frequencies lends itself so well to the precise determination of resonances and their associated Q factors, it should prove possible to apply GHz ZGV imaging to the characterization of elastic constants in nanoscale layers in a similar way to that demonstrated in picosecond ultrasonics38. Our 2D imaging approach would also be particularly powerful for analysing complex directional behaviour when applied to nanoscale-thickness anisotropic layers—following the example of previous time-domain GHz surface-acoustic-wave imaging of crystals and phononic crystals39,40—including the possibility of directional excitation with laser line sources. The ability to image and thereby directionally distinguish and analyse the different in-plane ZGV acoustic modes would further facilitate the extraction of elastic constants on the nanoscale by analogy with work on anisotropic ZGV modes in the MHz frequency range10.

Comparing our approach with that of surface-acoustic-wave transient gratings in the same GHz frequency range (see, for example, Bruchhausen et al.41) on the same sample would be fruitful, but especially our technique, exhibiting a much finer frequency control, should allow higher resolution of individual resonances and the detection of modes with larger Q factors. Finally, by extending the 2D time-domain imaging methods used for light propagation in optical waveguides and microstructures42, it should be possible to image photonic ZGV modes in the time domain in a way analogous to the work presented here.


Measurement setup

A Ti:sapphire pulsed laser produces a series of ~100 fs width pulses at repetition rate frep = 80.38 MHz and wavelength 830 nm. Part of this beam is frequency doubled (λ = 415 nm) and used for the pump with a pulse energy of ~0.15 nJ. It is intensity modulated with an acousto-optic modulator (AOM) at frequency fp. For experiments with a circular pump spot, the pump beam is focused on the Ti film side of the sample at normal incidence with a ×50 objective lens to a 4.2 μm radius (at 1/e2 intensity) to optimize the first ZGV Lamb mode generation (see Supplementary Note 2). This generates, in the centre of the pump spot, an instantaneous temperature rise of ~80 K after each laser pulse and a steady state temperature rise of ~50 K (see Supplementary Note 3). The Lamb waves thermoelastically generated with our pump are calculated to have an amplitude of ~10 pm. To determine the dispersion relation experiments are also carried out using a pump spot in the form of a line of 1/e2 intensity half-width 1.5 μm and a length of 5 μm.

The other part of the beam, at λ = 830 nm, is used for the probe. It is focused to a 2.8 μm radius (at 1/e2 intensity) for both types of pump beam focusing with the same objective lens as used for the pump and with a ~0.03 nJ pulse energy. When required, it is intensity modulated with another AOM at the frequency fs. The modulation frequency is set to allow heterodyne detection within the 3 MHz photodetector bandwidth \(\left( {|f_{\mathrm{p}} - f_{\mathrm{s}}| \le 3\,{\mathrm{MHz}}} \right)\). A Sagnac interferometer is incorporated22, producing two probe pulses separated by a time interval of t < 200 ps. A 2D spatial scanning system for the probe beam, composed of two moving mirrors in a confocal lens pair configuration22, is mounted in the path of the probe beam together with a delay line to monitor the spatiotemporal evolution of the acoustic field up to ~10 GHz. However, modes are only detected with wavelengths λ sufficiently large to be resolved by the finite size of the probe spot, i.e., λ 2 μm. (The effect of the pump spot on the generated acoustic wavelength spectrum is described in detail in the Supplementary Note 2). The out-of-plane surface particle velocity modulates the optical phase, which is converted to an intensity modulation that is detected with a lock-in amplifier. The arbitrary-frequency technique allows one to access frequencies nfrep + mfp, n an integer and m = ±1, by recording both in-phase and quadrature components20,21,43.

Data analysis

The setup used here makes use of the following: double modulation (i.e., intensity modulation of both pump and probe beams), a delay set in the probe-beam line, and a probe modulation upstream of the delay. The arrangement is described in detail in Matsuda et al.21. Because of the pump intensity modulation, the excited frequencies are nfrep + mfp, where m = + 1 for the upper sideband and −1 for the lower sideband. The generated acoustic field can be expressed as a superposition of these frequency components as

$$S(t) = \mathop {\sum}\limits_{n,m} {A_{n,m}} {\mathrm{cos}}[ - (n\omega _{{\mathrm{rep}}} + m\omega _{\mathrm{p}})t + \phi _{n,m}],$$

where An,m and ϕn,m are the position dependent amplitude and phase of a vibrational mode (n, m) of frequency nfrep + mfp. In the summation of Eq. (2), the case (n, m) = (0, −1) is not included. From the detection system (i.e., a photodetector connected to a lock-in amplifier), we access the in-phase (X) and quadrature (Y) components of the lock-in output, which are proportional to the acoustic out-of-plane surface particle velocity. (We assume \(X \propto {\int} u(t){\mathrm{cos}}\omega _{{\mathrm{ref}}}\,t{\mathrm{d}}t\) and \(Y \propto {\int} u(t){\mathrm{sin}}\omega _{{\mathrm{ref}}}\,t{\mathrm{d}}t\) where u(t) is the signal from the photodetector and ωref = |ωs − ωp|.) Both are functions of delay time τ and probe spot position. The complex signal ZX + iYsgn(ωp − ωs) can be rewritten as

$$Z(\tau ) = \mathop {\sum}\limits_{n,m} {A_{n,m}} e^{im[ - (n\omega _{{\mathrm{rep}}} + m\omega _{\mathrm{s}})\tau + \phi _{n,m}]}.$$

In the summation of Eq. (3), again the case (n, m) = (0, −1) is not included. The amplitude and the phase are found from a Fourier transform (FT):

$$A_{n,m}e^{im\phi _{n,m}} = \frac{1}{T}\mathop {\int}\limits_0^T Z (\tau )e^{i(mn\omega _{{\mathrm{rep}}} + \omega _{\mathrm{s}})\tau }{\mathrm{d}}\tau .$$

It is then possible to analyse the data at an angular frequency ω as a real-valued term involved in Eq. (2), i.e., giving a spatial pattern of the vibration at ω = 2π(nfrep + mfp). Modifying the frequency fp thus allows arbitrary acoustic frequency control.

In the first experiment, the pump frequency fp is increased from 0.1 up to 4 MHz in steps of 0.1 MHz. For each pump frequency we perform a single delay line scan for an acquisition time ~2 min. This provides data at frequencies nfrep + mfp. In the spectrum displayed in Fig. 1e, one can see the amplitude evolution associated with n = 21 and m = + 1 for all these pump frequencies. The maximum amplitude is obtained for fp = 2.0 MHz. In the following experiments the pump frequency is maintained at fp = 2.0 MHz to optimize the ZGV Lamb mode generation. The resulting measured acoustic frequencies are nfrep ± 2.0 MHz. In Fig. 1d, the analysis covers all the scanned frequencies, but for each n only the maximum amplitude is displayed for clarity (e.g., for n = 21 only the point associated with fp = 2.0 MHz is displayed).

In the second experiment related to ZGV Lamb mode imaging, each frame of the animation has a spatial resolution of ~2 μm and is recorded in somewhat over 2 min. The data acquisition for a full animation requires ~12 h. The high number of frames (301) allows us to image at a rate of more than 10 frames per acoustic period modes with a frequency up to ~2.5 GHz.

In the final experiment to determine dispersion curves, each 1D spatial scan (of the probe beam for a given pump-probe delay) is performed in ~2 min, leading to a total acquisition time ~8 h and a spatial resolution ~2 μm. This time is considerably longer than in a typical surface-acoustic-wave transient grating experiment44 owing to the need for the spatial scan in our case.

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.


  1. 1.

    Ranka, J. K., Windeler, R. S. & Stentz, A. J. Visible continuum generation in air-silica microstructure optical fibers with anomalous dispersion at 800 nm. Opt. Lett. 25, 25–27 (2000).

    ADS  CAS  Article  Google Scholar 

  2. 2.

    Laurent, J., Royer, D., Hussain, T., Ahmad, F. & Prada, C. Laser induced zero-group velocity resonances in transversely isotropic cylinder. J. Acoust. Soc. Am. 6, 3325–3334 (2015).

    ADS  Article  Google Scholar 

  3. 3.

    Holland, S. D. & Chimenti, D. E. Air-coupled acoustic imaging with zero-group-velocity Lamb modes. Appl. Phys. Lett. 83, 2704–2706 (2003).

    ADS  CAS  Article  Google Scholar 

  4. 4.

    Prada, C., Balogun, O. & Murray, T. W. Laser-based ultrasonic generation and detection of zero-group velocity Lamb waves in thin plates. Appl. Phys. Lett. 87, 194109 (2005).

    ADS  Article  Google Scholar 

  5. 5.

    Milián, C. & Skryabin, D. V. Soliton families and resonant radiation in a micro-ring resonator near zero group-velocity dispersion. Opt. Express 22, 3732–3739 (2014).

    ADS  Article  Google Scholar 

  6. 6.

    Ibanescu, M., Johnson, S. G., Roundy, D., Fink, Y. & Joannopoulos, J. D. Microcavity confinement based on an anomalous zero group-velocity waveguide mode. Opt. Lett. 30, 552–554 (2005).

    ADS  Article  Google Scholar 

  7. 7.

    Rayleigh, L. On the free vibrations of an infinite plate of homogeneous isotropic elastic matter. Proc. Lond. Math. Soc. 20, 225–234 (1889).

    MathSciNet  MATH  Google Scholar 

  8. 8.

    Clorennec, D., Prada, C. & Royer, D. Local and noncontact measurements of bulk acoustic wave velocities in thin isotropic plates and shells using zero group velocity Lamb modes. J. Appl. Phys. 101, 034908 (2007).

    ADS  Article  Google Scholar 

  9. 9.

    Cès, M., Clorennec, D., Royer, D. & Prada, C. Thin layer thickness measurements by zero group velocity Lamb mode resonances. Rev. Sci. Instrum. 82, 114902 (2011).

    ADS  Article  Google Scholar 

  10. 10.

    Cès, M., Royer, D. & Prada, C. Characterization of mechanical properties of a hollow cylinder with zero group velocity Lamb modes. J. Acoust. Soc. Am. 132, 180–185 (2012).

    ADS  Article  Google Scholar 

  11. 11.

    Grünsteidl, C., Murray, T. W., Berer, T. & Veres, I. A. Inverse characterization of plates using zero group velocity Lamb modes. Ultrasonics 65, 1–4 (2016).

    Article  Google Scholar 

  12. 12.

    Mezil, S., Laurent, J., Royer, D. & Prada, C. Non contact probing of interfacial stiffnesses between two plates by zero-group velocity Lamb modes. Appl. Phys. Lett. 105, 021605 (2014).

    ADS  Article  Google Scholar 

  13. 13.

    Mezil, S. et al. Investigation of interfacial stiffnesses of a tri-layer using zero-group velocity Lamb modes. J. Acoust. Soc. Am. 138, 3202–3209 (2015).

    ADS  CAS  Article  Google Scholar 

  14. 14.

    Yan, G., Raetz, S., Chigarev, N., Gusev, V. E. & Tournat, V. Characterization of progressive fatigue damage in solid plates by laser ultrasonic monitoring of zero-group-velocity Lamb modes. Phys. Rev. Appl. 9, 061001 (2018).

    ADS  CAS  Article  Google Scholar 

  15. 15.

    Dixon, S., Edwards, C. & Palmer, S. B. High accuracy non-contact ultrasonic thickness gauging of aluminium sheet using electromagnetic acoustic transducers. Ultrasonics 39, 445–453 (2001).

    CAS  Article  Google Scholar 

  16. 16.

    Yantchev, V., Arapan, L., Katardjiev, I. & Plessky, V. Thin-film zero-group-velocity lamb wave resonator. Appl. Phys. Lett. 99, 033505 (2011).

    ADS  Article  Google Scholar 

  17. 17.

    Balogun, O., Murray, T. W. & Prada, C. Simulation and measurement of the optical excitation of the S1 zero group velocity Lamb wave resonance in plates. J. Appl. Phys. 102, 064914 (2007).

    ADS  Article  Google Scholar 

  18. 18.

    Clorennec, D., Prada, C., Royer, D. & Murray, T. W. Laser impulse generation and interferometer detection of zero group velocity Lamb mode resonance. Appl. Phys. Lett. 89, 024101 (2006).

    ADS  Article  Google Scholar 

  19. 19.

    Tomoda, M. et al. Imaging acoustic waves in microscopic wedges. New J. Phys. 16, 103029 (2014).

    ADS  Article  Google Scholar 

  20. 20.

    Kaneko, S., Matsuda, O. & Tomoda, M. A method for the frequency control in time-resolved two-dimensional gigahertz surface acoustic wave imaging. AIP Adv. 4, 017142 (2014).

    Article  Google Scholar 

  21. 21.

    Matsuda, O., Kaneko, S., Wright, O. B. & Tomoda, M. Time-resolved gigahertz acoustic wave imaging at arbitrary frequencies. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 62, 584–595 (2015).

    Article  Google Scholar 

  22. 22.

    Tachizaki, T. et al. Scanning ultrafast sagnac interferometry for imaging two-dimensional surface wave propagation. Rev. Sci. Instrum. 77, 043713 (2006).

    ADS  Article  Google Scholar 

  23. 23.

    Briggs, A. Acoustic Microscopy 102, 103 (Clarendon, Oxford, 1992).

    Google Scholar 

  24. 24.

    Prada, C., Clorennec, D. & Royer, D. Power law decay of zero group velocity Lamb modes. Wave Motion 45, 723–728 (2008).

    MathSciNet  Article  Google Scholar 

  25. 25.

    Pang, W., Zhang, H., Whangbo, S. & Kim, E. S. High Q film bulk acoustic resonator from 2.4 to 5.1 GHz. In 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastricht MEMS 2004 Technical Digest 805–808 (IEEE, 2004).

  26. 26.

    Prada, C., Clorennec, D., Murray, T. W. & Royer, D. Influence of the anisotropy on zero-group velocity Lamb modes. J. Acoust. Soc. Am. 126, 620–625 (2009).

    ADS  Article  Google Scholar 

  27. 27.

    Laurent, J., Royer, D. & Prada, C. Temporal behavior of laser induced elastic plate resonances. Wave Motion 51, 1011–1020 (2014).

    Article  Google Scholar 

  28. 28.

    Wright, O. B. et al. Real-time imaging and dispersion of surface phonons in isotropic and anisotropic materials. Phys. B: Condens. Matter 316–317, 29–34 (2002).

    ADS  Article  Google Scholar 

  29. 29.

    Mansfeld, G., Alekseev, S. & Kotelyansky, I. Acoustic HBAR spectroscopy of metal (W, Ti, Mo, Al) thin films. In Ultrasonics Symposium, 2001 IEEE, 1, 415–418 (IEEE, 2001).

  30. 30.

    Emery, P. & Devos, A. Acoustic attenuation measurements in transparent materials in the hypersonic range by picosecond ultrasonics. Appl. Phys. Lett. 89, 191904 (2006).

    ADS  Article  Google Scholar 

  31. 31.

    Vlasie, V. & Rousseau, M. Acoustical validation of the rheological models for a structural bond. Wave Motion 37, 333–349 (2003).

    MathSciNet  Article  Google Scholar 

  32. 32.

    Philippe, F. D., Murray, T. W. & Prada, C. Focusing on plates: controlling guided waves using negative refraction. Sci. Rep. 5, 11112 (2015).

    ADS  Article  Google Scholar 

  33. 33.

    Meitzler, A. H. Backward-wave transmission of stress pulses in elastic cylinders and plates. J. Acoust. Soc. Am. 38, 835–842 (1965).

    ADS  Article  Google Scholar 

  34. 34.

    Prada, C., Clorennec, D. & Royer, D. Local vibration of an elastic plate and zero-group velocity Lamb modes. J. Acoust. Soc. Am. 124, 203–212 (2008).

    ADS  Article  Google Scholar 

  35. 35.

    Rossignol, C. et al. Elastic properties of ultrathin permalloy/alumina multilayer films using picosecond ultrasonics and brillouin light scattering. Phys. Rev. B 70, 094102 (2004).

    ADS  Article  Google Scholar 

  36. 36.

    Antonelli, G., Perrin, B., Daly, B. & Cahill, D. Characterization of mechanical and thermal properties using ultrafast optical metrology. Mrs. Bull. 31, 607–613 (2006).

    CAS  Article  Google Scholar 

  37. 37.

    Grossmann, M. et al. Characterization of thin-film adhesion and phonon lifetimes in Al/Si membranes by picosecond ultrasonics. New J. Phys. 19, 053019 (2017).

    ADS  Article  Google Scholar 

  38. 38.

    Mante, P. A., Robillard, J. F. & Devos, A. Complete thin film mechanical characterization using picosecond ultrasonics and nanostructured transducers: experimental demonstration on SiO2. Appl. Phys. Lett. 93, 071909 (2008).

    ADS  Article  Google Scholar 

  39. 39.

    Sugawara, Y. et al. Watching ripples on crystals. Phys. Rev. Lett. 88, 185504 (2002).

    ADS  CAS  Article  Google Scholar 

  40. 40.

    Otsuka, P. H. et al. Effect of excitation point on surface phonon fields in phononic crystals in real-and k-space. J. Appl. Phys. 117, 245308 (2015).

    ADS  Article  Google Scholar 

  41. 41.

    Bruchhausen, A. et al. Subharmonic resonant optical excitation of confined acoustic modes in a free-standing semiconductor membrane at GHz frequencies with a high-repetition-rate femtosecond laser. Phys. Rev. Lett. 106, 077401 (2011).

    ADS  CAS  Article  Google Scholar 

  42. 42.

    Engelen, R. J. P. et al. Ultrafast evolution of photonic eigenstates in k-space. Nat. Phys. 3, 401 EP (2007).

    Article  Google Scholar 

  43. 43.

    Mezil, S. et al. Imaging arbitrary acoustic whispering-gallery modes in the gigahertz range with ultrashort light pulses. Opt. Lett. 40, 2157–2160 (2015).

    ADS  CAS  Article  Google Scholar 

  44. 44.

    Maznev, A., Mazurenko, A., Zhuoyun, L. & Gostein, M. Laser-based surface acoustic wave spectrometer for industrial applications. Rev. Sci. Instrum. 74, 667–669 (2003).

    ADS  CAS  Article  Google Scholar 

Download references


We are grateful to Claire Prada and Alex Maznev for fruitful discussions. S. Mezil carried out this work as an International Research Fellow of the Japanese Society for the Promotion of Science (JSPS). We also acknowledge Grants-in-Aid for Scientific Research from the Ministry of Education, Culture, Sports, Science, and Technology (MEXT).

Author information




O.B.W. and S.M. proposed the research goals and supervised the project. Q.X. performed experiments with the help of S.M. and M.T. The theoretical model and numerical model was developed by S.M. and J.L. Data were analysed by Q.X., S.M. and P.H.O. Theoretical support was provided by S.M., O.M., Z.S., and O.B.W. All authors helped prepare, critically review, and revise the manuscript.

Corresponding author

Correspondence to Sylvain Mezil.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Xie, Q., Mezil, S., Otsuka, P.H. et al. Imaging gigahertz zero-group-velocity Lamb waves. Nat Commun 10, 2228 (2019).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing