Abstract
In molecular solids, the intense photoluminescence (PL) observed for solvated dye molecules is often suppressed by nonradiative decay processes introduced by excitonic coupling to adjacent chromophores. We have developed a strategy to avoid this undesirable PL quenching by optimizing the chromophore packing. We integrated the photoactive compounds into metal-organic frameworks (MOFs) and tuned the molecular alignment by introducing adjustable “steric control units” (SCUs). We determined the optimal alignment of core-substituted naphthalenediimides (cNDIs) to yield highly emissive J-aggregates by a computational analysis. Then, we created a large library of handle-equipped MOF chromophoric linkers and computationally screened for the best SCUs. A thorough photophysical characterization confirmed the formation of J-aggregates with bright green emission, with unprecedented photoluminescent quantum yields for crystalline NDI-based materials. This data demonstrates the viability of MOF-based crystal engineering approaches that can be universally applied to tailor the photophysical properties of organic semiconductor materials.
Similar content being viewed by others
Introduction
Many applications1,2,3 require the development of highly emissive chromophoric assemblies, but self-assembly of fluorescent chromophores into mesoscale-ordered structures often encounters problems resulting from the presence of dominant non-radiative decay paths leading to photoluminescence (PL) quenching4,5. A typical case is the cofacial π–π stacking, a frequent structural motif in the crystal structure of planar aromatic molecules. In these aggregates, the absorbed excitation energy is transferred to the lowest excited state in the neighboring chromophore. In many cases, also referred to as H-type non-emissive aggregates5, fluorescence is prohibited by dipole selection rules, and the excitation decays via non-radiative processes. Recovering the fluorescence present for the isolated monomers is of pronounced interest. J-type aggregates containing slipped or head-to-tail arranged π–π stacks of chromophores are highly fluorescent and of substantial interest as organic light-emitting materials6,7,8. As J-aggregates also feature high photo-absorption efficiency and reduced charge-recombination losses, they are also of pronounced interest for organic photovoltaics9,10. This general interest has stimulated a large number of efforts to enforce J-type aggregation of chromophores in supramolecular assemblies11,12,13. However, very often the resulting assemblies do not have the desired properties, instead of high luminescence, non-radiative quenching processes result in “dark” materials4. Apart from the H-aggregation, presence of transition metal-ions can also quench the emission14. Many of these approaches were realized by modifying intermolecular interactions via the introduction of H-bonding side groups or moieties, which affect the molecular packing through steric requirements6,7,8. The difficulties of crystal structure prediction (CSP)15,16, however, have severely limited the application of rational strategies and reported J-aggregates are mostly the results of serendipitous discovery6,7,8,11,12,13,17. A typical example is the case of 9-anthracene carboxylic acid (ACA), a small, prototype chromophore. Non-substituted ACA crystallizes in a triclinic structure, with bright PL properties. When side groups are attached at the 10-position of ACA to modify the position of emission bands, the slightly modified chromophores crystallize in rather different crystal structures (triclinic, monoclinic, and orthorhombic)18. As the CSP method struggle to predict experimentally realized structures, researchers had to resort to trial-and-error strategies to optimize the photophysical properties of such ACA assemblies.
Here, we propose a rational, de novo strategy for tuning chromophore packing that is based on metal-organic frameworks (MOFs). MOFs are constituted by coordinating organic linkers (in this case chromophores with suitable coordination groups) to metal or metal/oxo nodes, yielding porous, highly regular structures19,20,21. In these crystalline coordination networks, the structural freedom of the chromophore packing is highly reduced, since the overall topology of the MOF mainly depends on the connectivity of nodes and linkers. The porous structure of MOFs provides sufficient free space to allow for rotations and other conformational changes of the linkers within the bulk structure22,23. Such changes can be induced by attaching functional side groups to the chromophoric linkers. Since these modifications do not affect the topology of the assembly24,25, CSP can be carried out in a phase space of reduced dimensionality, making it much more accurate than for molecular crystals26,27.
Herein, we demonstrate our de novo approach for predictive tuning of structural parameters in a crystalline chromophore assembly for a particular MOF, Zn-SURMOF-2 28,29. A Zn-based paddle-wheel-type secondary building unit is tethered to a ditopic, chromophore linker, yielding a square grid type two-dimensional structure of closely packed sheets (Fig. 1a)28,29,30. In the present study, we have focused on a unique class of chromophores, naphthalenediimides (NDIs). In addition to unsurpassed PL quantum yields (QYs) in solution, these organic dyes are able to form of charged-transfer complexes and exhibit high charge carrier mobilities as well as other interesting photophysical properties31,32,33. The photophysical properties of NDI monomers can be rationally tuned by substituting the core with electron-pushing or -pulling groups34. Despite their huge potential, so far only a few supramolecular assemblies of such core-substituted NDIs (cNDIs) have been explored35,36,37, since the design of efficient cNDI-based chromophoric assemblies is limited by tedious synthesis procedures and unpredictable self-assembly35,36,37,38,39.
As a prototype linker for constructing chromophoric MOFs, here we use a bis-ethoxy-substituted-NDI (NDI(OEt)2), equipped with two carboxylic acids. This linker can be readily assembled into a SURMOF-2 structure, where π–π interactions yield a rather close packing (Fig. 1a). As expected in the case of such a close packing of chromophores, non-radiative processes govern the decay of optical excitations, and the corresponding SURMOF-2 is a non-emissive H-aggregate40. When we inspected the structure in more detail, we realized that H-aggregate formation could be suppressed by increasing the rotation angle θ of the chromophoric linkers around the molecular axis (Fig. 1b). Our heuristic expectation that larger distances between NDI core planes and a slipping of the intermolecular transition dipoles, resulting from larger values of θ, should lead to a reduction in fluorescence quenching was confirmed by a theoretical analysis, see Fig. 1b. These calculations (for details see the Methods section) were based on the transition charge fit (TrEsp) and revealed that for θ > 55.4° the Coulomb coupling changed sign, indicating a transition from H- to J-type aggregation. Note that we did not consider charge-transfer coupling, because the inter-cNDI distance is much larger than 4 Å (required for a tight molecular packing).
In the present work, to tune θ to the desired value, we implement an engineering approach by attaching “steric control units” (SCUs) to the imide -N of the cNDI, as shown in Fig. 1b. Unfortunately, the tedious synthesis of cNDI monomers prohibits a trial-and-error approach to investigate the effect of these SCUs. Therefore, we first create a library of 18 possible SCUs, then optimize the geometry of the individual linkers using a force-field calculation, and then use a simple scheme to assemble 18 different MOFs in silico using a previously described MOF constructor27. Then, the MOF lattice constant is fixed and an MD scheme is used to optimize the structure of the linkers (including the intramolecular dihedral angles). As a result of inter-ligand interactions, the dihedral angles are changed and also the rotation angle θ (angle between cNDI core and carboxylate-planes) changed. The corresponding results (Fig. 1b) led to some surprises, e.g. the fairly bulky benzyl group exerted smaller dihedral and rotation angle compared to a –CH3 substituent. This computational screening process identifies three suitable, synthetically viable SCUs, which are then synthesized and assembled into the Zn-SURMOF-2 structures displayed in Fig. 1a. The synthesized Zn-SURMOF-2 displays J-aggregation feature with bright PL, as predicted by computational methods.
Results
Structural prediction of a library of NDI(OEt)2-assemblies
To arrange the cNDIs in space, we focused on MOFs of type Zn-SURMOF-2, assembled from ditopic (with phenylcarboxylate coupling groups) cNDI linkers (see Fig. 1a)28,29. A few cNDI-based bulk MOF structures have been reported previously, but either their photophysical properties were not studied41,42 or only non-emissive H-aggregates were obtained40.
To study the interplay between chromophore packing and photophysical properties, we started with a NDI(OEt)2 linker (Fig. 2a and Supplementary Fig. 1). Using the DFT method we have optimized a trimer model of NDI(OEt)2 (A). These calculations yielded a cofacial stacking (~5.8 Å) of the NDI(OEt)2 cores, an undesirable H-aggregate type arrangement (see Methods section and Supplementary Fig. 2). The mounting of the NDI(OEt)2-linker inside the framework (via the two phenylcarboxylate groups) offers the option for tuning the inter-NDI(OEt)2 coupling by changing the rotation angle θ (see Fig. 1b). To illustrate this effect, we employed the electrostatic potential (TrEsp) method43. The TDM–TDM (transition dipole moment) Coulomb coupling between two closely spaced (~6.8 Å) NDI(OEt)2 chromophores was calculated as a function of rotation angle θ. Since such calculations are not possible for a periodic structure, the situation inside the MOF was approximated by studying two adjacent NDI(OEt)2 monomers placed at a distance (x) of 6.8 Å between the molecular axis. While for θ ~ 2° the coupling in these dimers was positive, explaining the H-aggregate type behavior in A (Supplementary Table 2), for θ > 55.4° the interchromophore coupling sign reversed, indicating the formation of a J-aggregate. For larger distances (x), the coupling strength decreased, but the nature of coupling (H or J) remained the same (Supplementary Fig. 3).
Next, we attached sterically demanding side groups R to the cNDI core, as a synthetic strategy to tune θ. Depending on their precise geometry (Fig. 1b), the R moieties act as SCUs by changing the dihedral angle (α1) between the NDI(OEt)2 plane and the phenyl plane, and thus affect the NDI core rotation angle θ. We created a library of 18 possible R groups (chosen such that they leave the optical properties of the chromophore unchanged) and calculated the resulting values of θ (Fig. 2a, b and Supplementary Table 1). These simulations (using a trimer model) revealed that for these R-groups rotation angles between 0° and the maximum limit of ~90° can be achieved (Fig. 2b). It is worth noting that the dihedral angle (α1) and rotation angle θ show a nontrivial dependence on the “bulkiness” of R, where e.g., the methyl (8) group exerted larger dihedral and rotation angle (89.7° and 40.9°, respectively) as by the benzyl (6) group (87.6° and 34°, respectively) (Fig. 2b and Supplementary Table 1).
To validate the predictions for chromophore geometry and excitonic coupling using the DFT method, we chose three R groups, two from the borderline region in Fig. 2b (8, R = Me and 9, R = Et from the blue region), and one for which a J-aggregate is predicted (15, R = iPr from the green region) (Fig. 2b), for subsequent experimental analysis.
Crystalline assembly of R-NDI(OEt)2 in Zn-SURMOF-2 structure
The three linkers obtained from the screening process described above were synthesized according to the established cNDI synthetic protocol40. Subsequently, using a layer-by-layer (lbl) spin-coating method, we fabricated Zn-(R-NDI(OEt2)) (R = Me (8 A), Et (9 A), and iPr (15 A)) SURMOF-2 structures on –OH functionalized quartz and silicon substrates (see Methods section). The out-of-plane and in-plane X-ray diffraction (XRD) patterns of 8A revealed the successful growth of crystalline MOF thin films that were oriented along the (001) axis, with lattice dimensions (a = b = 2.6 nm) perpendicular and parallel to the substrate that were identical to those of the parent Zn-(NDI(OEt2)) SURMOF-2 structure (A) described previously (Fig. 3 and Supplementary Fig. 4)40. The other two SURMOF-2 structures, 9A and 15A, also revealed XRD patterns that were similar to that of 8A, suggesting identical structures. In the case of 15A, which contained the most bulky SCU –iPr, the interlayer distance was found to increase to ~6.8 Å, 1 Å greater than that in A (~5.8 Å) (Supplementary Fig. 4). The interlayer distances for 8A and 9A were also similar (6.6–6.7 Å). This interlayer distance, however, did not affect the aggregation type (coupling sign), as evidenced by calculations of the Coulomb coupling for different distances. The DFT simulated linker orientation angles are different (as expected) from the GROMACS-optimized values, see Supplementary Table 2. Supplementary Figure 5 shows the possible geometry of the NDI(OEt)2 linkers in structure A and 15A (by considering a model of trimer), illustrating the changes in dihedral angles caused by the SCU.
Effect of “steric control units” on excitonic coupling
The UV–Vis absorption spectra of all the linkers solvated in ethanol were similar, confirming that the “steric control” R-groups do not affect the optical properties of NDI(OEt2) (Supplementary Fig. 6)44. However, after assembling the modified linkers into the corresponding SURMOF-2 structures, the absorption spectra exhibited pronounced differences, indicating substantial differences in the excitonic coupling (Fig. 4a). First, the ratios of the vibronic overtones at 436 (A(0–1)) and 472 (A(0–0)) nm (Fig. 4a) were strongly different. In the case of 8A, the vibronic ratio resembles that in A, but an additional blueshift was observed. Interestingly, for 9A and 15A, an inversion of vibronic intensity was observed. Considering the vibronic features observed for typical Kasha aggregates5,8, the stronger intensity of the first overtones (A(0-0)) in 9A and 15A clearly suggest loss of cofacial stacking of the NDI(OEt)2 chromophores6. We noted that the coupling energy (Jmn) for A (+22 meV) and 9A (+21 meV) or 15A (−16 meV) did not differ markedly (Fig. 1b), and hence a large spectral shift would not be anticipated. Rather the changes observed in the vibronic ratios indicated a different aggregation behavior. Particularly, the absorption spectrum of 15A shows a broader peak in the longer wavelength region (>500 nm) compared to the other SURMOFs. To explain this behavior we employed time-dependent density functional theory (TD-DFT) to simulate the electronic absorption spectra of the NDI(OEt)2 dimers with rotation angles 34° and 60° for H- and J-type coupling, respectively (Supplementary Figs. 7 and 8). In the case of H-type, the absorption maximum shifted slightly to a shorter wavelength. But, in J-type a new absorption shoulder was observed in the longer wavelength region (~485 nm). This is because in a J-aggregate two transition dipoles become almost collinear, and the dark state (in H-aggregate) becomes allowed and low lying visible absorption peaks are observed in the spectrum. These data agreed well with the experimentally observed absorption spectrum of 15A.
The differences in the PL spectra upon excitation at 450 nm were even more dramatic. In contrast to the non-emissive structure A, 8A and 9A exhibited substantial PL intensities, with a maximum at 480 nm and a broad band at longer wavelength (520–600 nm) (Fig. 4b). In the case of 15A (blue), PL became much more intense; also the 480 nm peak became less prominent and was overtaken by a broad PL peak with a maximum at 540 nm. The PL maximum at 480 nm resembled that observed for non-coordinated linkers in solution. We attributed the red shifted PL in these SURMOFs to the formation of J-aggregates. We can rule out the possibility of excited state dimer (excimer)45,46 formation: the absorption vibronic ratios do not resemble that of the solvated chromophore and the excitation spectrum monitored at 580 nm exhibited a broader peak ~500 nm compared to that of the solvated chromophore (Supplementary Fig. 9). This outcome agrees well with our prediction, as the “steric control” 15 rendered J-type coupling, and the observed intense red shifted PL supports the hypothesis.
The PL lifetimes recorded for 8A, 9A, and 15A exhibited two components with different lifetimes of ~6.5 and ~1.3 ns (Fig. 4c). Whereas in 8A and 9A the short-lived component dominated the emission, in 15 A, the long-lived PL47 became the more prominent component. This observation is consistent with the larger rotation angle θ, which would lead to a loss of the cofacial packing. Photographic images of the linkers in solution and of the corresponding SURMOFs are given in supplementary Fig. 10 (see also Supplementary Fig. 11). Whereas the bright cyan emission of the solvated linker PL remains unaffected by attaching the “steric control” group, the SURMOFs reveal striking changes. Attachment of the SCUs transformed the non-emissive A to an intensely green emissive thin film 15A. The PL QY measured for 8A, 9A, and 15A (~0.4%, 0.7%, and 2.3%, respectively) was consistent with the formation of J-type assemblies (Fig. 4d).
Discussion
Our results reveal that a MOF-based approach using chromophoric linkers allows for a rational crystal engineering of highly regular chromophoric assemblies. Starting from a non-emissive H-aggregate, where the close proximity of neighboring chromophores strongly quenches optical excitations, we have used computational methods to search for SCUs to modify the linker packing, with the aim to realize J-aggregates with bright emission. Using a library of chromophoric MOF linkers differing in their SCUs, we were able to identify functionalities, which change the molecular packing such that the π–π cofacial stacking is strongly reduced. This search was only possible because in this MOF-based approach prediction of the linker (chromophore) arrangement is largely simplified by the fixed framework topology, where effectively only one degree of freedom remains. The computational screening procedure reduced the dipole–dipole coupling of the non-emissive start structure (~+22 meV) to −16 meV.
The theoretical prediction was fully confirmed by a thorough photophysical characterization of the SURMOFs built from the modified organic linkers identified in the computational screening. The optical characterization of the target material was greatly aided by the structural properties of SURMOFs as compared to systems made from MOF powders28,29. In the latter case, the morphological heterogeneity and the irregular nanoscale morphology severely hamper the optical and photophysical characterization. The non-emissive starting material was converted into a highly emissive SURMOF with bright green luminescence. The possibility to rationally design J-aggregates from starting chromophores is of tremendous interest from the perspective of exciton transport, electron transport, and other related optoelectronic properties.
Methods
X-ray diffraction
The XRD measurements for out-of-plane (co-planar orientation) were carried out using a Bruker D8-Advance diffractometer equipped with a position-sensitive detector LynxEye in geometry, operated with a variable divergence slit and a 2.3° Soller-slit on the secondary side. Cu Kα1,2-radiation (λ = 0.154018 nm) was used in all cases.
Computational methods
The Coulomb couplings (TDM–TDM coupling shown in Fig. 1b as a green line) were calculated using transition charge from electrostatic potential (TrEsp) fit (where transition charges were fitted to every atom in the monomer from electrostatic potential fit)43. First we calculated transition density matrix between ground state S0 and excited state S1 and save it in “cube” format. From this point we employed MultiWfn program48 to make the fit and calculate transition charges for every atom in monomer. These transition charges have been used to calculate Coulomb coupling by the sum over interaction between atomic transition charges approach of Howard et al.49. This approach have been shown to reproduce very good values for the exciton interaction energy compared to point-dipole or extended-dipole approaches. Note that the magic angle of 55.4° is slightly different than that obtained in the case of the point-dipole approach (54.74°). This is because the NDI linker is not completely planar (see Supplementary Fig. 12) and we used the sum over interaction between atomic transition charges approach (see Supplementary Table 3) to evaluate the exciton interaction energy.
The ditopic cNDI linkers, irrespective of the size of attached “steric control units”, form isoreticular Zn-SURMOF-2 structures, which have been reported in previous works29,40. In the previous work, also DFT calculations where the whole SURMOFs were optimized have been described. With this previous information in hand, we have assembled the (geometry-optimized) ditopic linkers into a SURMOF-2 structure using an MOF constructor27. Test experiments have shown that the unit cell dimensions along the [100] direction and the [001] direction do not change upon substitution the cNDI linkers used here with R-groups. To predict the excitonic coupling (TDM–TDM coupling), the most important parameters are interchromophore distance and transition dipole moment geometry. Our proposed model structures, as described below, consider those two important parameters.
The proposed molecular dynamic (MD) scheme to predict the rotation angle θ for various R groups consists of 3 steps: (i) Optimization of the R-NDI(OEt)2 monomer geometry based on optimized potential for liquid simulation (OPLS) force field50,51,52 to get the dihedral angle (α1) between the NDI(OEt)2 plane and the phenyl plane (there is a second dihedral angle (α2) between the phenyl group and the carboxylate group and this is basically zero for the isolated linker. In our discussion we focus on α1); (ii) optimization of the interlayer distance ([010] direction) via calculating the potential energy of neighboring linkers (for a dimer) as a function of layer spacing (5.0–8.0 Å); (iii) construction and optimization of a trimer geometry (for final coordinates see SupplementaryTable 4) with the layer distance obtained in step (ii) and measure the rotation angle θ of central linker. MD simulations were carried out in GROMACS-2018.4 package53,54,55,56.
For step (i) all initial R-NDI(OEt)2 monomers were optimized using steepest descent method until the maximum force was smaller than 0.001 kJ mol−1 nm−1 or the maximum step 100,000 had been reached. Then, the backbone atoms (carboxylate groups, and atoms lying along the rotation axis) of the structures were fixed and remaining atoms were only allowed to rotate around the central axis. Next, simulated annealing simulations (SA-MD)57 with constraint were carried out in step (i) and (iii) to find a global optimum geometry.
SA-MD were implemented using the following strategies: by coupling to the V-rescale thermostat under NVT ensemble (time step 1 fs), the system is quickly heating up from 300 to 1800 K in 25 ps to ensure random state and then stepwise cooling down to 0 K at a cooling rate of −2 K ps−1. Finally, the monomer (step i) and trimers (step iii) structures obtained from the SA-MD were energy minimized using conjugated gradient method in 50,000 steps. Taking the optimized potential energy value as criteria, the geometry obtained via SA-MD is better than without SA-MD optimization.
The optical properties of NDI(OEt)2 monomer and dimers were studied using the DFT method with the hybrid B3LYP functional58. For all atoms the triple-z-valence-plus-polarization (def2-TZVP) atomic orbital (AO) basis sets were used59. The Grimme D3 correction with Becke–Johnson damping was included for all systems studied60,61. The monomer NDI(OEt)2 structure was fully optimized using gradient minimization techniques. The dimer structures for simulation of UV–Vis absorption spectra were constructed by placing the molecules 6.8 Å apart (MD optimized distance for 15 A [a trimer model], also confirmed by experimental data) to mimic the distance experimentally measured in the SURMOF and then both of them rotated by angles 0°, 34°, or 60° to simulate the steric effects of varying side groups (R). These angles were chosen based on the first level of theoretical simulations performed with the MDs on the trimers within GROMACS-2018.4 and reported in Supplementary Table 1. Calculations carried out at the TD-DFT level of theory also yielded a similar change in absorption spectra. They can be attributed to the Coulomb coupling between the neighboring cNDI cores of SURMOFs. To simulate UV–Vis absorption spectra 20 lowest lying singlet excitations have been calculated using time-dependent (TD) DFT approach (Supplementary Table 3).
The influence of different SCUs on NDI(OEt)2 assemblies within SURMOF-2 was further verified using the DFT method, only for the experimentally fabricated SURMOFs. A trimer of NDI(OET)2 was constructed and the distance between the linkers was set up according to experimental values. To improve the efficiency of simulations for larger systems, trimers were fully optimized using the resolution of identity (RI)-DFT procedure62 together with multipole accelerated resolution of identity-J using the Perdew–Burke–Ernzerhof functional63 and def2-SVP AO basis set64. We took three NDI(OEt)2 organic linkers, placed them at the distance corresponding particular side group (R = H 5.8 Å, R = Me and Et 6.6 Å, R = iPr 6.8 Å) and fixed the terminal oxygen atoms to mimic the influence of zinc paddle-wheel (as in SURMOF-2). From these energy optimized trimers, only the central NDI(OEt)2 has been visualized in Supplementary Fig. 5 (overlap of R = H and iPr). To increase the accuracy of the calculations Grimme D3 dispersion correction with Becke–Johnson damping and high-quality grid (m5) was also used. All DFT and TD-DFT calculations were performed in TURBOMOLE 7.3 software package65.
Optical characterization
Time‐resolved spectroscopy: For the time‐resolved spectroscopy, time correlated single photon counting (TCSPC) with Nano LED light source (373 nm peak wavelength, 1 MHz max. repetition rate, 1.3 ns pulse duration) and FluoroHub Single Photon Detection Module was used.
PLQY measurements were performed according to the method described by de Mello et al.66. The beam of a 405 nm continuous wave laser diode (Thorlabs, DL5146-101S) was focused on the sample held inside an integrating sphere (Labsphere) with a diameter of 150 mm. For the detection two y-fiber-coupled uv/vis spectrometers (Avantes, AvaSpec-ULS-RS-TEC and Thorlabs, CCS200) were used. The spectral response of the whole detection system was calibrated using a calibration lamp (Ocean Optics, HL-3plus-INT-CAL).
Fabrication of Zn-R-NDI(OEt)2 SURMOF-2
Ethanolic solutions of 1 mM zinc acetate and 20 μM R-NDI(OEt)2 (R = methyl/ethyl/isopropyl) solutions (in ethanol) were sequentially deposited onto the precleaned quartz glass substrates using a spin-coating method in a lbl fashion. After the metal or linker deposition, the samples were washed with ethanol to remove unreacted metal/linker or by-products from the surface. For metal and linker both, the spin-coating time was fixed at 10 s with r.p.m. of 2000.
We have used SURMOF as a chromophore assembling template, instead of conventional MOF powders. The preference of SURMOFs over MOF powders was motivated by the requirements of optical and optoelectronic applications, which require optically active thin films deposited on transparent and conductive substrates with good control over the film thickness.
Data availability
The data sets generated during and/or analyzed during the current study are available from the corresponding authors on reasonable request.
References
Zhang, Q. et al. Efficient blue organic light-emitting diodes employing thermally activated delayed fluorescence. Nat. Photonics 8, 326–332 (2014).
Reineke, S. et al. White organic light-emitting diodes with fluorescent tube efficiency. Nature 459, 234–238 (2009).
Kido, J., Kimura, M. & Nagai, K. Multilayer white light-emitting organic electroluminescent device. Science 267, 1332–1334 (1995).
Hu, Z. et al. An insight into non-emissive excited states in conjugated polymers. Nat. Commun. 6, 8246 (2015).
Hestand, N. J. & Spano, F. C. Expanded theory of H- and J- molecular aggregates: the effects of vibronic coupling and intermolecular charge transfer. Chem. Rev. 118, 7069–7163 (2018).
Würthner, F., Kaiser, T. E. & Saha-Möller, C.-R. J-aggregates: from serendipitous discovery to supramolecular engineering of functional dye materials. Angew. Chem. Int. Ed. 50, 3376–3410 (2011).
Eder, T. et al. Switching between H- and J-type electronic coupling in single conjugated polymer aggregates. Nat. Commun. 8, 1641 (2017).
Hestand, N. J. & Spano, F. C. Molecular aggregate photophysics beyond the Kasha model: novel design principles for organic materials. Acc. Chem. Res. 50, 341–350 (2017).
Malt’sev, E. I., Lypenko, D. A., Shapiro, B. I. & Brusentseva, M. A. Electroluminescence of polymer/J-aggregate composites. Appl. Phys. Lett. 75, 1896 (1999).
Gao, J. et al. Enhanced charge transfer doping efficiency in J-aggregate poly(3-hexylthiophene) nanofibers. J. Phys. Chem. C 119, 16396–16402 (2015).
Yagai, S., Seki, T., Karatsu, T., Kitamura, A. & Würthner, F. Transformation from H- to J- aggregated perylene bisimide dyes by complexation with cyanurates. Angew. Chem. Int. Ed. 47, 3367–3371 (2008).
Keller, N. et al. Enforcing extended porphyrin J-aggregate stacking in covalent organic frameworks. J. Am. Chem. Soc. 140, 16544–16552 (2018).
Egawa, Y., Hayashida, R. & Anzai, J.-i pH- induced interconversion between J-aggregates and H-aggregates of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin in polyelectrolyte multilayer films. Langmuir 23, 13146–13150 (2007).
Li, L., Shen, S., Lin, R., Bai, Y. & Liu, H. Rapid and specific luminescence sensing of Cu(II) ions with a porphyrinic metal-organic framework. Chem. Commun. 53, 9986–9989 (2017).
Neumann, M. A., Leusen, F. J. J. & Kendrick, J. A major advance in crystal structure prediction. Angew. Chem. Int. Ed. 47, 2427–2430 (2008).
Nyman, J. & Reutzel-Edens, S. M. Crystal structure prediction is changing from basic science to applied technology. Faraday Discuss. 211, 459–476 (2018).
Sikdar, N. et al. Coordination-driven fluorescent J-aggregates in a perylenetetracarboxylate-based MOF: permanent porosity and proton conductivity. J. Phys. Chem. C 120, 13622–13629 (2016).
Zhu, L., Al-Kysi, R.-O., Dillon, R. J., Tham, F. S. & Bardeen, C. J. Crystal structures and photophysical properties of 9-anthracene carboxylic acid derivatives for photomechanical applications. Cryst. Growth Des. 11, 4975–4983 (2011).
Maji, T. K., Matsuda, R. & Kitagawa, S. A flexible interpenetrating coordination framework with a bimodal porous functionality. Nat. Mater. 6, 142–148 (2007).
Kitagawa, S., Kitaura, R. & Noro, S.-I. Functional porous coordination polymers. Angew. Chem. Int. Ed. 43, 2334–2375 (2004).
Furukawa, H., Cordova, K. E., O’Keeffe, M. & Yaghi, O. M. The chemistry and applications of metal-organic frameworks. Science 341, 1230444 (2013).
Horike, S. et al. Dynamic motion of building blocks in porous coordination polymers. Angew. Chem. Int. Ed. 45, 7226–7230 (2006).
Vogelsberg, C. S. et al. Ultrafast rotation in an amphidynamic crystalline metal-organic framework. Proc. Natl Acad. Sci. USA 114, 13613–13618 (2017).
Deng, H. S. et al. Multiple functional groups of varying ratios in metal-organic frameworks. Science 327, 846–850 (2010).
Tanabe, K. K. & Cohen, S. M. Postsynthetic modification of metal-organic frameworks—a progress report. Chem. Soc. Rev. 40, 498–519 (2011).
Li, S., Chung, Y. G., Simon, C. M. & Snurr, R. Q. High-throughput computational screening of multivariate metal-organic frameworks (MTV-MOFs) for CO2 capture. J. Phys. Chem. Lett. 8, 6135–6141 (2017).
Addicoat, M. A., Coupry, D. E. & Heine, T. AuToGraFS: automatic topological generator for framework structures. J. Phys. Chem. A 118, 9607–9614 (2014).
Liu, J. & Wöll, C. Surface-supported metal-organic framework thin films: fabrication methods, applications, and challenges. Chem. Soc. Rev. 46, 5730–5770 (2017).
Liu, J. et al. A novel series of isoreticular metal organic frameworks: realizing meta-stable structures by liquid phase epitaxy. Sci. Rep. 2, 921 (2012).
Haldar, R. et al. Anisotropic energy transfer in crystalline chromophore assemblies. Nat. Commun. 9, 4332 (2018).
Kobaisi, M. A., Bhosale, S. V., Latham, K., Raynor, A. M. & Bhosale, S. V. Functional naphthalene diimides: synthesis, properties and applications. Chem. Rev. 116, 11685–11796 (2016).
Suraru, S.-L. & Würthner, F. Strategies for synthesis of functional naphthalene diimides. Angew. Chem. Int. Ed. 53, 7428–7448 (2014).
Yan, H. et al. A high-mobility electron-transporting polymer for printed transistors. Nature 457, 679–686 (2009).
Sakai, N., Mareda, J., Vauthey, E. & Matile, S. Core-substituted naphthalenediimides. Chem. Commun. 46, 4225–4237 (2010).
Kar, H. & Ghosh, S. J-aggregation of sulfur-substituted naphthalenediimide (NDI) with remarkably bright fluorescence. Chem. Commun. 52, 8818–8821 (2016).
Kar, H. et al. Cooperative supramolecular polymerization of an amine-substituted naphthalene-diimide and its impact on excited state photophysical properties. Chem. Sci. 7, 1115–1120 (2016).
Berrocal, J. A. et al. Unraveling the driving forces in the self-assembly of monodisperse naphthalenediimide-oligodimethylsiloxane block molecules. ACS Nano 11, 3733–3741 (2017).
Das, A. & Ghosh, S. H-bonding directed programmed supramolecular assembly of naphthalene-diimide (NDI) derivatives. Chem. Commun. 52, 6860–6872 (2016).
Fu, C. et al. Unravelling the self-assembly of hydrogen bonded NDI semiconductors in 2D and 3D. Chem. Mater. 28, 951–961 (2016).
Haldar, R. et al. Excitonically coupled states in crystalline coordination networks. Chem. Eur. J. 23, 14316–14322 (2017).
Wade, C. R., Li, M. & Dincă, M. Facile deposition of multicolored electrochromic metal-organic framework thin films. Angew. Chem. Int. Ed. 52, 13377–13381 (2013).
Guo, Z. et al. Modulating the electrical conductivity of metal-organic framework films with intercalated guest π-systems. J. Mater. Chem. C 4, 894–899 (2016).
Madjet, M. E., Abdurahman, A. & Renger, T. Intermolecular Coulomb couplings from ab initio electrostatic potentials: application to optical transitions of strongly coupled pigments in photosynthetic antennae and reaction centers. J. Phys. Chem. B 110, 17268–17281 (2006).
Zhang, B. et al. Highly fluorescent molecularly insulated perylene diimides: effect of concentration on photophysical properties. Chem. Mater. 29, 8395–8403 (2017).
Kumar, M. & George, S. J. Spectroscopic probing of the dynamic self-assembly of an amphiphilic naphthalene diimide exhibiting reversible vapochromism. Chem. Eur. J 17, 11102–11107 (2011).
Kumar, M. & George, S. J. Green fluorescent organic nanoparticles by self-assembly induced enhanced emission of a naphthalenediimide bolaamphiphile. Nanoscale 3, 2130–2133 (2011).
Sarkar, A., Dhiman, S., Chalishazar, A. & George, S. J. Visualization of stereoselective supramolecular polymers by chirality-controlled energy transfer. Angew. Chem. Int. Ed. 129, 13955–13959 (2017).
Lu, T. & Chen, F. Multiwfn: a multifunctional wavefunction analyzer. J. Comput. Chem. 33, 580–592 (2012).
Howard, I. A., Zutterman, F., Deroover, G., Lamoen, D. & Van Alsenoy, C. Approaches to calculation of exciton interaction energies for a molecular dimer. J. Phys. Chem. B 108, 19155–19162 (2004).
Jorgensen, W. L. & Tirado-Rives, J. Potential energy functions for atomic-level simulations of water and organic and biomolecular systems. Proc. Natl Acad. Sci. USA 102, 6665–6670 (2005).
Dodda, L. S., Vilseck, J. Z., Tirado-Rives, J. & Jorgensen, W. L. 1.14*CM1A-LBCC: localized bond-charge corrected CM1A charges for condensed-phase simulations. J. Phys. Chem. B 121, 3864–3870 (2017).
Dodda, L. S., Cabeza de Vaca, I., Tirado-Rives, J. & Jorgensen, W. L. LigParGen web server: an automatic OPLS-AA parameter generator for organic ligands. Nucleic Acids Res. 45, W331–W336 (2017).
Hess, B., Kutzner, C., van der Spoel, D. & Lindahl, E. GROMACS 4: algorithms for highly efficient, load-balanced, and scalable molecular simulation. J. Chem. Theory Comput. 4, 435–447 (2008).
Pronk, S. et al. GROMACS 4.5: a high-throughput and highly parallel open source molecular simulation toolkit. Bioinformatics 29, 845–854 (2013).
Páll, S., Abraham, M. J., Kutzner, C., Hess, B. & Lindahl, E. in Solving Software Challenges for Exascale (eds Markidis, S. & Laure. E.) 3–27 (Springer International Publishing, Switzerland, London, 2015).
Abraham, M. J. et al. GROMACS: high performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1–2, 19–25 (2015).
Laarhoven, V., Peter, J. M. & Aarts E. H. L. Simulated Annealing: Theory and Applications 7–15 (Springer, Dordrecht, 1987).
Becke, A. D. Density-functional energy-exchange approximation with correct asymptotic behaviour. Phys. Rev. 38, 3098–3100 (1988).
Schäfer, A., Huber, H. & Ahlrichs, R. Fully optimized contracted Gaussian basis sets of triple zeta valance quality for atoms Li to Kr. J. Chem. Phys. 100, 5829–5835 (1994).
Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 132, 154104 (2010).
Grimme, S., Ehrlich, S. & Goerigk, L. Effect of the damping function in dispersion corrected density functional theory. J. Comput. Chem. 32, 1456–1465 (2011).
Eichkorn, K., Treutler, O., Öhm, H., Häser, M. & Ahlrichs, R. Auxiliary basis sets to approximate coulomb potential. Chem. Phys. Lett. 240, 283–290 (1995).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Weigend, F. & Ahlrichs, R. Balanced basis sets of split valance, triple zeta valance and quadruple zeta valance quality for H to Rn: design and assessment for accuracy. Phys. Chem. Chem. Phys. 7, 3297–3305 (2005).
TURBOMOLE V7.3 2018. A Development of University of Karlsruhe and Forschungszentrum Karlsruhe GmbH, 1989-2007. http://www.turbomole.com (TURBOMOLE GmbH, 2007).
Mello, J. C., de., Wittmann, H. F. & Friend, R. H. An improved experimental determination of external photoluminescence quantum efficiency. Adv. Mater. 9, 230–232 (1997).
Acknowledgements
R.H. acknowledges a postdoctoral fellowship from Alexander von Humboldt foundation. A.M., S.D. and F.O. acknowledge Région des Pays de la Loire through the program LUMOMAT for the financial support of this research with the project LumoMOF. M.J. acknowledges support from Karlsruhe School of Optics and Photonics (KSOP) graduate school. W.W. acknowledges support from the SFB 1176 “Structuring of Soft Matter”. R.H., W.W. and C.W. acknowledge support through the Cluster “3DMM2O” funded by German DFG. I.A.H. acknowledges funding from DFG priority program SPP1928 COORNETs. All computations were performed on the computational resource ForHLR II funded by the Ministry of Science, Research and the Arts Baden-Württemberg and DFG.
Author information
Authors and Affiliations
Contributions
R.H., S.D., W.W., F.O. and C.W. conceived the idea and designed the experiments; A.M. and S.D. carried out the linker syntheses; R.H. and A.M. carried out the SURMOF syntheses; R.H. carried out the material characterizations, photophysical measurements and analyses with help from M.J., I.A.H. and B.S.R.; Q.Z., M.K., W.W. and D.J. planned and carried out the theoretical calculations; N.J. assisted in the design of a linker library; and R.H. prepared the manuscript with the inputs from all the co-authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Haldar, R., Mazel, A., Krstić, M. et al. A de novo strategy for predictive crystal engineering to tune excitonic coupling. Nat Commun 10, 2048 (2019). https://doi.org/10.1038/s41467-019-10011-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-019-10011-8
This article is cited by
-
On–off conduction photoswitching in modelled spiropyran-based metal-organic frameworks
Communications Chemistry (2023)
-
FAIR data enabling new horizons for materials research
Nature (2022)
-
Let the light be a guide: Chromophore communication in metal-organic frameworks
Nano Research (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.