Land use is at the core of various sustainable development goals. Long-term climate foresight studies have structured their recent analyses around five socio-economic pathways (SSPs), with consistent storylines of future macroeconomic and societal developments; however, model quantification of these scenarios shows substantial heterogeneity in land-use projections. Here we build on a recently developed sensitivity approach to identify how future land use depends on six distinct socio-economic drivers (population, wealth, consumption preferences, agricultural productivity, land-use regulation, and trade) and their interactions. Spread across models arises mostly from diverging sensitivities to long-term drivers and from various representations of land-use regulation and trade, calling for reconciliation efforts and more empirical research. Most influential determinants for future cropland and pasture extent are population and agricultural efficiency. Furthermore, land-use regulation and consumption changes can play a key role in reducing both land use and food-security risks, and need to be central elements in sustainable development strategies.
Scenarios of land use and land cover play an important role in exploring future developments and policy options for climate change, biodiversity, food security, ecosystem services, and sustainable development. The exploration of future global land use in international assessments started in the 1990s (SRES)1 and gained increasing importance in environmental outlooks and assessments2,3. During the last decade, the number of studies and models on global land-use projections has increased tremendously, reflecting concerns about land scarcity, climate change impacts or bioenergy threatening food security4,5,6,7, loss of natural areas and biodiversity, and sustainable development in general8,9. However, despite the central role of land use in future environmental change, the modeling and systematic model comparison of global land-use projections is still in its infancy10,11 and the uncertainty in results is large12,13,14,15. Land use results from multiple interactions between regionally specific demand and supply systems, numerous feedback processes, and smaller-scale factors such as land-use regulation and land ownership, and therefore projecting land-use change is highly complex. As an example, although agricultural production has increased by about 60% during the last 40 years, global cropland area has increased by only 5% as a result of increased agricultural productivity (intensification)16. Therefore, the intricate interplay between demand and production, and agricultural intensification is a core determinant of future land use. To account for the range of possible developments in these drivers, long-term projections are often dealt with following a scenario approach, where fundamental uncertainties in socio-economic factors are explicitly varied along so-called storylines to explore contrasting futures. However, the range of model outcomes for such scenarios tends to be large and results may depend equally on model characteristics as on storylines and assumptions15. Given the importance of land-use projections for informing policy makers in the areas of climate change, food security, and biodiversity protection, it is important to investigate the spread across storylines and model results, to better understand the possible evolution of land use and the food system.
Here we use the scenario framework of the Shared Socio-economic Pathways (SSPs)17 and their implementation by integrated assessment and agricultural models14, to explore how long-term drivers determine projections of land use and food availability. We follow a sensitivity methodology recently applied to projections of CO2 emissions of the SSP scenarios18 to assess the contribution of each driver to the scenario outcomes. This allows us to explain model spread and results and, more importantly, to identify the key determinants of future land use, their relative importance, and interactions. Although single model studies have identified factors that determine future land use and support a transition to a sustainable land and food system, this study allows a systematic comparison across factors and models, and identifies the interaction between factors. Furthermore, the discussion highlights gaps and shortcomings in the current modeling of global land use to guide future research priorities.
The SSP scenario framework consists of five contrasting storylines19, with SSP2 representing a baseline development with continuation of current trends, a sustainability scenario (SSP1), a regional rivalry scenario (SSP3), a fragmentation scenario (SSP4), and a fossil fuel scenario (SSP5). Here we focus on the socio-economic developments of SSP1, SSP2, and SSP3 as their land-use implications were initially explored in most detail and by the largest number of models12,14. Results related to SSP4 and SSP5 are however also available. The SSP scenarios play a crucial role in the ongoing assessment and reports by The Intergovernmental Panel on Climate Change (IPCC)20, in the agricultural modeling community AGMIP6,21,22 and in the Inter-Sectoral Impact Model Intercomparison Project ISIMIP23, and also in assessments of biodiversity within IPBES24 and probably a range of future assessments of sustainable development. The SSP narratives represent contrasting global developments with respect to population growth, economic development, technological change, consumption preferences, environmental protection, and international cooperation (see Methods and Supplementary Information). Although projections for population and GDP were harmonized in quantitative terms within the SSP process25,26, all other storyline elements were translated into scenario drivers by each team separately, because differences in model structure hampered quantitative harmonization.
Our analysis covers all five models that participated in the initial quantification of land use in the SSPs14, namely AIM27, GCAM28, GLOBIOM29, IMAGE-MAGNET30,31, and MAgPIE32, plus an additional model, IMPACT33, frequently used in agricultural assessments3,34.
To determine the sensitivity of scenario outcomes to the scenario drivers, we rely on a sensitivity analysis protocol, which allows to identify the interaction between drivers35 and which was previously applied to the analysis of CO2 emission trajectories as well18. We distinguish six groups of scenario drivers: population growth (POP), economic growth in gross domestic product per capita (GDPpc), land-use regulation (LUR), agricultural productivity growth (PRD), consumption preferences (CON), and trade development (TRD). Using a matrix of scenario experiments, the deviation of other SSPs from the SSP2 baseline is attributed to these six driver groups, showing their individual, final, and interaction effect (Supplementary Fig. 1). The individual effect describes how scenario results change if a single factor of SSP2 baseline is replaced by the one used in SSP1 (or SSP3) and the final effect shows how results in the full SSP1 (or SSP3) scenario change if this single factor is changed back to the SSP2 default setting; the interaction effect is computed as the difference between individual and final effect, and shows how other factors interact with this single factor, i.e., reduce the individual effect to the final effect (see Methods). In order to analyze how sensitivity results depend on the quantity of a driver, we derive from the experiments the size of the drivers and relate them to the change in outputs.
We find that spread-across models arises from diverging sensitivities to long-term drivers and from various representations of land-use regulation and trade, showing the need for reconciliation and more empirical research. We identify population and agricultural efficiency as most influential drivers and show that land-use regulation and consumption changes can play a key role in reducing both land-use and food-security risks. The analysis of interactions between factors reveals that efficiencies, land-use regulation, and consumption change are most effective when ccombined, and all three need to be central elements in sustainable development strategies.
Spread in model results
The spread in model results for land use and the agricultural system is large but some common patterns emerge (Fig. 1 and Supplementary Fig. 2). In all models, cropland area in 2050 is lower in SSP1 (−13% on average) and higher in SSP3 (+8% on average), compared with SSP2 (Fig. 1). This is consistent with the storylines that describe more sustainability and regard for environmental boundaries in SSP1, and stronger environmental degradation in SSP3. Similarly, out of the five models reporting pasture area, four find a decrease in SSP1 (−8% on average) and four find an increase in SSP3 (+2% on average), compared with SSP2 until 2050. Due to lower economic growth in SSP3, per-capita food demand decreases in SSP3 for five of the six models, by up to 10% compared with SSP2 until 2050. The picture is more heterogeneous for SSP1 with three models reporting an increase in 2050 and three a decrease compared with SSP2. As a combined effect of population, per-capita food demand, and other scenario-specific drivers, crop production (for food and feed) decreases for five models in SSP1 (−10% on average) and increases in SSP3 for four models (+2% on average). These projections are consistent with those observed in Popp et al.14.
Disentangling the drivers
The results of our sensitivity analysis (individual effect, final effect, and interaction effect by driver) are presented to understand changes in cropland (Fig. 2) and food consumption (Fig. 3), for SSP1 and SSP3. Pasture and food production are also provided in the Supplementary Information (Supplementary Figs. 3 and 4). Supplementary results for trade, prices, livestock consumption, and productivities are also provided in the Supplementary Fig. 5 but not covered by our discussion.
The sensitivity analysis on cropland shows that the most important drivers are population (POP), consumption preferences (CON), and agricultural productivity growth (PRD) (Fig. 2). Economic growth (GDPpc) has a smaller effect and shows an opposite effect to the other scenario factors in SSP1 and SSP3 on crop area (e.g., lower population in SSP1 results in lower cropland area, yet GDPpc is higher in SSP1, which has the opposite effect). The impact of the various factors depend on the driver sizes (across models and across scenarios), as analyzed further below. The change in cropland area as a result of agricultural productivity growth (PRD) varies across models, as they differ in how agricultural technological improvement affects either area use or consumption volumes. Land-use regulation (LUR) can have a substantial contribution to changes in cropland area, as seen in IMAGE/MAGNET and IMPACT. The apparently small sensitivity of scenario outcomes to LUR in other models is related to little or no changes in this driver compared with SSP2, as shown by the analysis of drivers size (Supplementary Fig. 6), and models vary largely in their implementation of land-use regulation (Supplementary Data 1). Through availability of area for food production, LUR also affects agricultural production and food demand (Fig. 3), and up to 60% of the theoretical production change through limited crop area is compensated by increased agricultural efficiencies. The spread in model results is mostly explained by diverging effects of CON and PRD on cropland area in the various models, and by one model (MAgPIE) expecting large differences between scenarios due to trade development (TRD).
Pasture area is most sensitive to PRD, CON, and LUR, although the strength of the effect across the drivers is very heterogeneous across models (Supplementary Fig. 3). One model (GLOBIOM) projects a decrease in pasture in SSP3 compared with SSP2, mainly due to a reduction in total production, which is caused by lower GDPpc, lower PRD, and TRD effects. In other models, the tendency toward increasing pasture through lower productivity and higher consumption and production dominates.
Population (POP) and economic development (GDPpc) are the most important determinants for food demand in SSP1 (SSP3), with lower (higher) population and higher (lower) economic growth leading to more (less) per-capita demand. Population increases pushes down per-capita consumption due to higher food prices, as high population growth increases pressure on land and production. Thus, for per-capita consumption, trends of POP and GDPpc work in the same direction, while they have a compensating effect in all other variables where the size of the population plays a role (e.g., total production and total land use). Stricter regulation of land use (LUR) appears in several models as an effective measure to limit agricultural area (see above) but leads to lower food consumption in SSP1, thus increasing the risks to food security. The interaction effect, e.g., in IMAGE/MAGNET, however, shows that the additional scenario drivers of SSP1 (consumption change (CON) and higher agricultural productivity (PRD)) reduce this adverse effect of LUR, while maintaining the beneficial effect on cropland extent. The storylines explicitly describe lower (higher) environmental impact of food consumption in SSP1 (SSP3), reflected in lower (higher) meat consumption and food waste, respectively. Caloric consumption per capita in SSP1 is very sensitive to these assumptions on consumption preferences (CON), but less so in SSP3, as this element of the storyline was implemented less stringently in SSP3 (Supplementary Fig. 6). Differences in trade development (open, globalized trade in SSP1 and restricted, regionalized trade in SSP3) hardly affect caloric consumption per capita (Fig. 3). Faster progress in agricultural productivity (PRD) improves caloric consumption in SSP1, whereas slower progress decreases it in SSP3, in the models with endogenous food demand response to prices. Evaluating caloric consumption separately for crops and livestock products (Supplementary Fig. 2) reveals that models show a rather homogenous picture in livestock consumption as an effect of consumer preference changes, at the global level, but diverge on per-capita consumption of crops as a result of diverse assumptions on waste reduction and products substituting animal-sourced food.
Change in crop production in SSP3 compared with SSP2 is largely explained by population (POP) and economic development (GDPpc) (Supplementary Fig. 4). Where consumption preference (CON) or trade development (TRD) has a large effect, the decrease in SSP1 can be more than 10%, mostly due to reduced consumption of livestock commodities or trade shifts to more efficient production systems, and consequently reduced feed demand. Faster progress in agricultural productivity (PRD) triggers higher demand and production of crops, mediated via reduced prices. The interaction effect between groups of drivers is large in some cases. For example, a strong individual effect of GDPpc on total production is much less important when consumption preferences change toward less livestock products (GLOBIOM). Although agricultural production is projected to decrease in SSP1 compared with SSP2 in almost all models, the direction of change is less clear for SSP3, as the increasing effect of population and dietary preferences is counterbalanced by the reducing effects of GDPpc and agricultural productivity. In cases where a decrease of crop production is projected for SSP3, a large sensitivity to agricultural productivity is present (GLOBIOM and IMPACT).
SSP1 and SSP3 do not differ equally from SSP2, not in terms of total results and not in terms of sensitivity to drivers (Supplementary Figs. 5 and 7). This can be due to nonlinear model dynamics, but is also caused by driver sizes for SSP1 and SSP3 not differing equally from SSP2 (Supplementary Fig. 6). Driver sizes also differ across models, as they were quantified independently and as they are influenced by modelers’ interpretation and current knowledge about possible future developments, e.g., in agricultural technology (Supplementary Fig. 6). To analyze the effect of driver sizes on the sensitivity analysis results, we relate for each sensitivity test the change in output to change in driver magnitude, so that a general elasticity of output variables to driver inputs can be assessed across models and scenarios (Fig. 4). An increase in population and livestock consumption (CON) leads to an increase in cropland area and an increase of crop productivity leads to a reduction of cropland area with a relative effectiveness of more than 50% on average. Interpretation of the effectiveness of land-use regulation (LUR) is difficult due to problems in measuring the size of the driver and needs to be improved in future assessments. Although analysis of these elasticities reveal additional insights into model behavior and how sensitivities to a driver propagate through the individual models, it however does not inform on possible future variation, e.g., GDPpc seems to have a very limited effect compared with population (POP), but the possible variation over the next 50 years in GDPpc is much larger than for population, as also reflected in the SSP projections.
This analysis has shown that global land use could evolve in diverging directions in the future, either following the historical expansion of cropland and pasture, or moving toward a reversing trend in agricultural land use. These future developments will have multiple implications for greenhouse gas emission, biodiversity, and potential for carbon uptake and bioenergy production. Decomposing drivers of change, we find that the most influential ones would be changes in agricultural productivity, consumption preferences, and population development. Land-use regulation also has a large potential to affect future land use, but is currently underrepresented in models and should receive more attention in future assessments. The possibly beneficial effects of increased trade on global land use are uncertain and partly contradict earlier findings36, and also require further research. Some other drivers included in the SSPs storylines may also deserve scrutiny, but are not yet quantified by global land-use models, due to technical difficulties in quantifying their impact (urban migration, inequalities, farming structure, and governance). Beyond the global dynamics addressed here, regionally diverging trends may lead to smaller effects (e.g., for dietary change due to leakage37), or to different results for the controversial land-saving of higher crop yields38. Furthermore, consistent with the SSP scenario logic17, we considered here only socio-economic drivers and did not include climate impact and mitigation elements, such as yield impacts from change in temperature and precipitation, CO2 prices, or afforestation deployment for carbon sequestration. Analysis elsewhere has shown the potentially large area demand of land-based mitigation14,39, higher intensification of croplands, and possible interaction with the food and agricultural system6.
Differences across models can be explained by two main causes. First, modelers have differing quantitative interpretation of storylines. Each modeling team follows their own assumptions in terms of future productivity change, extent of diet shifts, or area protection, depending on their own assessment of past developments and possible future evolution. In some cases, drivers are not or poorly represented, such as land-use regulation, although it has a large potential to restrict future agricultural land expansion40. Currently, global models tend to only exclude certain areas from agricultural conversion, mostly focusing on official protected areas and their assumed expansion according to international targets, but ignore specific national and sub-national regulations on land-use zoning or deforestation rates (e.g., sugar cane zoning and forest code land reserve quotas in Brazil) and, as also shown here, land-use regulation is necessary to assure the land-saving effect of agricultural intensification38. Although the effectiveness of such approaches can be poor41, these regulations and land-tenure aspects are relevant to short- and medium-term conversion quantities and locations. Therefore, future model development should include more explicitly land-use regulation and its facets at various spatial scales, and also its interaction with agricultural productivity and food security. Changes in international trade is another example of parsimonious implementation, with some models considering solely adjustments to current tariffs, whereas some others assume more fundamental restrictions and amplification of global trade in a long-term perspective.
The second cause for differences in model results comes from parameterization choices and input data selection. These would gain from being further compared, harmonized, and improved through model intercomparison exercises12. However, differences in model design also play a role and reflect the various areas of focus between the tools (geochemical cycles, agricultural markets, and economy-wide analysis) and the representation of system behavior12. For instance, drivers behind land productivity change (prices, research investments, technology adoption, etc.) can greatly vary depending on whether the model is primarily dealing with agricultural development or deforestation. Demand feedback42 can be omitted in models focusing on production optimization, but in this analysis we see that the spread in results also arises from diverging sensitivities in demand feedbacks, even missing in one of the models. To cope with diversity of model views, use of ensemble analyses is recommended rather than single model assessments and these now became mainstream in climate policy39, food6 and biodiversity43, and in the SSP analysis of future land use14. This study highlights the different sensitivity of the model responses to scenario drivers and could be used to improve the model design in the future, develop recommendation and best practices, and guide users of the model results when comparing individual model results against the whole ensemble.
Although global land-use models have the ambition to include the relevant drivers and processes to project future large-scale land-use dynamics, the identification of key determinants of future land use needs to account for aspects currently poorly addressed by the models. Local land-management regulations, as discussed above for protected areas, are poorly represented in current models, although they can play important roles at fine scale. Land tenure, processes of intensification and technology transfer, and integration of crop cultivation and livestock with forestry and other land uses (urbanization, recreational areas, and mining) are other underrepresented factors relevant for future land projections. To identify the gaps and shortcomings in global-scale models, more rigorous model validation and evaluation on smaller scales are necessary.
Some of the factors that we identified as key elements for future land use have been analyzed earlier. Single model studies have highlighted the importance of dietary transitions44,45,46, increased crop yields47, and livestock efficiencies37,48,49, or have shown the combined effects of demand side, production, and land-use regulation8,9. Beyond these earlier studies, this systematic multi-model analysis allows to compare the relative effect across the drivers and across the models. Furthermore, this study adds an analysis of interactions between factors: an increase in agricultural efficiency can reduce demand for cropland but can also trigger higher demand. Yield increase is therefore shown to be more effective in reducing land use when combined with land-use regulation and consumption changes. Similarly, land-use regulation can decrease expansion into cropland but may form a risk to food security, if not bundled with increased productivity and consumption shifts.
Consumption changes, better land management, and increased agricultural productivity therefore appear robust and effective measures to reduce the demand for agricultural land, in particular when bundled together. As land-use development is closely tied to challenges related to biodiversity, food security, or climate, the targeting of these measures appear as a key component of the long-term sustainability agenda.
The SSP narratives
To explore possible futures of global environmental change and climate policy, the scientific community has developed the so-called SSPs. The narratives behind these scenarios have been described in qualitative terms19 and were recently quantified in integrated assessment models17. Designed to cover the challenges space for mitigation and adaptation, they describe five consistent pathways along which the world could develop and address all relevant aspects from population, economic development, education and health, and environmental awareness to international cooperation (Supplementary Table 1). In this study, we focus on SSP1, SSP2, and SSP3 (SSP4 and SSP5 shown in Supplementary Fig. 8), which describe a world of low, medium, and high challenges to both mitigation and adaptation, respectively. The sustainability scenario SSP1 is characterized by low population growth, fast and inclusive economic growth, respect for environmental boundaries, low environmental impact of consumption, fast technological development, and global cooperation. SSP2 shows continuation of current trends in all aspects, whereas the regional rivalry scenario SSP3 is dominated by high population growth, slow economic development, larger environmental impact of consumption, slow technological progress, and regional fragmentation and trade barriers.
The development of land use in these scenarios is determined by trends in the factors described below; as model results change when the input of these factors changes according to the SSP-specific storyline, these were varied in this sensitivity analysis.
POP describes the population development per region over the scenario period and was quantified for the SSPs by ref. 25. SSP1 has lower population growth in most regions, whereas population growth in SSP3 is high in developing regions and low in developed regions.
GDPpc describes the regional income per year and per capita, over the scenario period, and as derived for the SSPs by a long-term growth model26 based on the population projections described above. Per-capita income grows faster in SSP1 than in SSP2, also due to faster demographic transition, whereas growth is slower in SSP3.
CON describes a range of consumer preferences with respect to environmental impact of food consumption. In SSP1, orientation toward lower resource intensity leads to reduced demand for livestock products and to a reduction of waste in the food system, whereas in SSP3 an opposite development dominates.
PRD describes changes in the productivity of agricultural systems over the scenario period. In SSP1, faster technological development and respect for environmental boundaries leads to increased efficiency in agricultural systems, including higher crop yields and more efficient livestock systems, whereas in SSP3 technological process in agricultural systems is rather slow.
LUR describes land-use regulation as part of the SSP scenarios. In SSP1, land-use regulation is described as rather strong and weak in SSP3, which is reflected both in the area designated for nature conservation, but also in the ease of conversion from natural to agricultural land.
TRD describes how international trade develops over the scenario period. SSP1 is characterized by globalized trade and low trade barriers, but also by increased preference for regional production in food consumption. Contrary, SSP3 is characterized by higher trade barriers and regional fragmentation.
The precise implementation of these six sets of assumptions across the three SSP scenarios varies in the six models (see further below). These sets are referred to as sensitivity factors, as each represents a collection of related scenario features relevant to the sensitivity. Bioenergy demand is not included in this analysis and does not vary across the SSP scenarios of one specific model.
In this study we included all five Integrated Assessments Models (IAMs) involved in the recent SSP quantification17 (either the full IAM or its land component). These models are state-of-the-art global climate–energy–economy models including a land-use component. Their quantification of land-use futures14 is now being used in various assessments, e.g., within IPCC and IPBES. One additional model, the IMPACT model33, which is frequently applied in global assessments of land use and food security3,5,6,34, also contributed results to the sensitivity experiments. Here we give a brief description of the models:
AIM27 is a large-scale computer simulation model and represents the energy and land systems in one computable general equilibrium (CGE) structure. Supply, demand, investment, and trade are described by individual behavioral functions that respond to changes in the prices of production factors and commodities, as well as changes in technology and preference parameters. Production functions are formulated as multi-nested constant elasticity substitution functions. Household demand is formulated as a linear expenditure system function. A single international trade market is assumed for each traded commodity and substitution between domestic and imported commodities is based on the Armington assumption. Allocation of land by sector is formulated as a multi-nominal logit function27. The model contains 17 regions and 42 sectors, including 10 agricultural ones.
GCAM28 is an integrated assessment model comprising modules for the economy, the energy system, the agriculture and land-use system, and for climate. The agriculture and land-use component50 determines supply, demand, and prices for crops, livestock, forest products, and bioenergy in an iterative procedure to achieve market equilibrium, in interaction with agents and prices of the economy and energy system. Supply and land use is resolved for 283 world regions, and within each of the these model regions land is allocated economically based on profit maximization with an assumption of nonlinear distributions of profits for each competing use. Demand for agricultural commodities is resolved for 32 world regions, based on population, income, and price levels. GCAM allows for global trade in crops, forestry, and bioenergy. GCAM distinguishes 12 crop and forestry categories, 6 animal categories, and bioenergy, in 32 or 283 world regions for demand and production, respectively.
GLOBIOM48 is the land component of the MESSAGE-GLOBIOM integrated assessment model. It is a global partial equilibrium model covering agriculture, forestry, and bioenergy as the three main competing land-use sectors. For its production processes, the model uses detailed grid-cell information on biophysical and technical cost information. Final demand is computed for households, industry, and services through own-price elasticities demand curves specific to each product. GLOBIOM has a spatial equilibrium modeling approach and represents bilateral trade based on cost competitiveness. The model has been used for integrated assessment of climate change impact and mitigation policies in land-based sectors, agricultural and timber markets foresight, analysis of food security in the long term, and its trade-offs with environmental indicators. The global version of GLOBIOM covers 30 regions and 25 agricultural commodities (18 crops and 7 livestock commodities), as well as bioenergy products.
IMAGE-MAGNET identifies land-use scenarios from the integrated assessment model IMAGE30 using the CGE model MAGNET31 to represent the agricultural economy. MAGNET is a multi-regional, multi-sectoral, applied general equilibrium model based on neo-classical microeconomic theory, and it is an extension of the standard GTAP model51. The agricultural sector is represented in high detail compared with standard CGE models. Land supply, suitability, and potential agricultural yields are evaluated on a grid-scale in IMAGE and provided to MAGNET and used to model land as a production factor described by a land supply curve52. Other production factors are labor, capital, and chemical inputs. Household demand depends on population, income, and income and price elasticities, whereby price elasticities change with increasing incomes, and are also influenced by consumer preferences. Trade is modeled bilaterally using the Armington assumption53. IMAGE and MAGNET use 26 world regions and 10 agricultural commodities.
IMPACT is a partial equilibrium model used to analyze long-term challenges and opportunities for food, agriculture, and natural resources at global and regional scales33. It links information from climate models (Earth System Models), crop simulation models (e.g., Decision Support System for Agrotechnology Transfer), and water models to a core global, partial equilibrium, multimarket model focused on the agriculture sector. Future production is influenced by price-driven changes in productivity and land use, as well as by external trends of productivity and land dynamics. Demand for agricultural commodities is a function of the price of the commodity and the prices of other competing commodities, per-capita income, total population, and consumer preferences, which are represented by price and income elasticities of demand, based originally on estimates by the United States Department of Agriculture, and adjusted to represent various future dietary scenarios and to satisfy Engel’s and Bennett’s Laws. Trade is represented as pooled trade and IMPACT distinguishes 62 primary and processed commodities, and 159 countries (for demand) and 320 Food Producing Regions.
MAgPIE 3.032,54 is the land-use component of the REMIND-MAgPIE integrated assessment modeling framework55. MAgPIE optimizes global agricultural production costs under consideration of biophysical and socio-economic constraints, including land-use-related policies. MAgPIE estimates crop production patterns and pasture areas on spatial resolution of clustered 0.5° grid cells, using crop-physiological and hydrological data from LPJmL56. Food demand for plant and livestock calories is estimated using an econometric regression model57. Functional forms of the demand system can be adapted to the storylines. Demand systems account for income but not for price elasticity. Feed demand for livestock production is considering regional livestock-specific feed baskets that are dynamic when livestock productivity increases over time49. International trade is estimated based on cost-efficiency, but is constrained to a scenario-specific degree by historical trade patterns58. Crop yields can be endogenously increased by investments into research and technology59. MAgPIE has 10 world regions and differentiates 17 crop types, 5 livestock products, 2 bioenergy crops, pasture and crop residues, oilcakes, and molasses.
The model-specific implementation of the SSP drivers is described in the next section. Additional model documentation can also be found online http://themasites.pbl.nl/ models/advance/index.php and in the individual model documentations.
Implementation of SSP drivers in the models
The implementation of the SSP storylines into the models AIM27, GCAM28, GLOBIOM48, IMAGE-MAGNET30,31, and MAgPIE32,54 has been described in detail in Popp et al.14. Here we present an overview of this implementation across models including IMPACT33 and also address specific issues of implementation in the various models (Supplementary Data 1). The quantification of drivers is described further below.
GDP per capita (GDPpc) is implemented in strongly different ways across the models. Partial equilibrium models (GCAM, GLOBIOM, IMPACT and MAgPIE) have GDPpc only influencing the consumer income and therefore the demand part of the model. Contrary, the general equilibrium models (AIM and MAGNET) have GDP influence not only income but also technological change and thus also the overall structure of the economy and the supply side. Therefore, these models estimated shifters of technology change (capital and labor productivity) according to the exogenous GDP (i.e., GDPpc × population) and compute technological change endogenously. This procedure is applied in the scenario of GDPpc (_GDPpc) and POP (_POP), as both types of scenarios change total GDP and technological change.
Population (POP) according to the SSP-specific projections25 is implemented straightforward in the partial equilibrium models GCAM, GLOBIOM, and IMPACT, and affects the entire demand system and interaction with price effects and production and trade. In MAgPIE, demand per capita is not effected by population changes due to absent price feedbacks in the demand system57. In the CGE models AIM and MAGNET, population size also changes the total GDP, via scenario-specific GDPpc, and thus the technological change calibrated to meet this total GDP; in these models, population affects the agricultural system both via the demand side and also the technology side.
Consumption preferences (CON) are described in the SSP storylines as differences in consumer behavior toward environmental impact of food consumption via food waste and share of animal products in the diet. The implementation of food waste is straightforward in all models, although with varying fractions of waste reduction. In addition, the consumption of animal products was reduced in all models in SSP1 and increased for SSP3 in some models, mostly via preference factors. Some models also included health guidelines in defining their diets for SSP1. In addition to different food-demand assumptions, the MAgPIE implementation of CON includes assumptions on soil nitrogen uptake efficiency and environmental flow protection. In CON for SSP1, the latter limits the available water for irrigation and leads to a substantial decrease in crop yields and larger crop area. For this reason, MAgPIE results were excluded from Fig. 4.
Agricultural productivity (PRD) is characterized by fast technological change and respect for environmental boundaries for SSP1 and slower technological change in agricultural systems in SSP3. For crop systems, models mostly adjusted the progress in (potential) crop yields to reflect the storylines or linked this progress to scenario-specific GDP growth. For livestock systems, whose efficiencies are much more difficult to compare, they followed a similar approach or adjusted the speed in which systems can catch up to the most efficient ones.
Land-use regulation (LUR) was varied across SSPs in some of the models, either by changing the areas for nature conservation or areas otherwise protected from conversion to agriculture, or by modifying the ease by which non-agricultural land can be converted to agriculture. The diversity in model approaches makes it difficult to compare level of LUR across models.
Trade development (TRD) in agricultural commodities is affected in several models by (current) trade barriers such as import taxes or export subsidies and their modification toward the future. Some other models have so-called self-sufficiency ratios, which they change to reflect the storylines.
Sensitivity analysis and design of experiment
Attributing the differences between SSP scenario results to the specific input factors is a non-trivial problem, as input factors interact in a complex system. A recently developed methodology35,60 allows to identify the individual effects of an input factor and its summary interaction with other factors, with a limited number of model experiments, although at the expense of missing individual interactions. This sensitivity methodology was recently applied to CO2 emission pathways in the SSP framework18 and is also used here. The model inputs that vary between the various scenarios are grouped into scenario factors and the scenario results are described to be a function of a set of these input factors (here, the six driving factors POP, GDPpc, CON, PRD, LUR and TRD described above). Varying factors between a base-case (SSP2) and the alternative scenario (SSP1, SSP3 and also SSP4 and SSP5), we derive the sensitivity of results to these drivers (Supplementary Fig. 1 and Supplementary Table 2). The individual effect of one factor is derived by replacing for this factor of interest the value in the reference case (here SSP2) by the values in the alternative case (SSPX); the final effect (with opposite sign) is derived by changing all factors but the one of interest (Supplementary Fig. 1). The difference between the individual effect and the final effect is described as the interaction effect, and describes to what extent the effect of a factor is influenced by other scenario factors. This approach does not explicitly elucidate interaction between single factors, for which much more permutations of factors would be required, but reduces the number of required model runs to identify bulk interaction of one factor with the other factors. It has been shown that this computational shortcut is an adequate approximation to the full matrix of interactions, at the expense of ignoring each single interaction term35,60. In general, and as a plausibility test, the sum of individual effects is larger than the total difference between two scenarios and the sum of final effects is smaller than the total difference between two scenarios.
The advantage of the sensitivity approach applied here18 is that it requires less simulations than full-factorial analysis (GCAM, >30,000 simulations61), and compared with simpler approaches such as a Kaya decomposition62 it can account for interaction between drivers and is not path-dependent as the regularly applied stepwise scenario approach8,43.
Quantifying the size of the drivers
The change in most drivers compared with the SSP2 default case differs across models, as only GDP per capita (GDPpc) and population (POP) had been harmonized for the SSPs17. The quantification of all other storyline elements was done by the modeling groups individually. In order to quantify the size of a driver compared with SSP2, we use the most proximate result variable. For example, to estimate the size of the dietary transition and consumption preferences (CON) in SSP1 compared with SSP2, we use the change in food consumption of livestock products per capita in the scenario SSP2_CON1, i.e., the individual effect of the factor CON on the most proximate result variable, namely per capita consumption of livestock products. Likewise, we use the change in total trade volume for the driver trade development (TRD), in the scenario SSP2_TRD1, where only the TRD setting has been shifted toward SSP1. As for the sensitivity methodology, we derive both individual and final effect. All variables and scenarios to derive the size of change per driver are listed in Supplementary Table 3 and the resulting quantification is shown in Supplementary Fig. 6. To determine the sensitivities independent of driver sizes, we relate the change in output variable to the size of the driver, compared with SSP2.
The scenario data and sensitivity experiments used in this study are available from the corresponding author upon request.
Code for processing the data is available from the corresponding author upon request.
IPCC. Special Report on Emissions Scenarios. Report No. 0 521 80493 0 (Cambridge Univ. Press, 2000).
UNEP. Global Environmental Outlook 2012 (United Nations Environmental Programme, 2012).
Millenium Ecosystem Assessment. Ecosystems and Human Well-Being: Scenarios (Island Press, Washington, D.C., 2005).
Hertel, T. W. The global supply and demand for agricultural land in 2050: A perfect storm in the making? Am. J. Appl. Econ. 93, 259–275 (2011).
Nelson, G. C. et al. Agriculture and climate change in global scenarios: why don’t the models agree. Agric. Econ. (UK) 45, 85–101 (2014).
Hasegawa, T. et al. Risk of increased food insecurity under stringent global climate change mitigation policy. Nat. Clim. Change 8, 699–703 (2018).
Fujimori, S. et al. Inclusive climate change mitigation and food security policy under 1.5 °C climate goal. Environ. Res. Lett. 13, 074033 (2018).
van Vuuren, D. P. et al. Pathways to achieve a set of ambitious global sustainability objectives by 2050: explorations using the IMAGE integrated assessment model. Technol. Forecast. Soc. Change 98, 303–323 (2015).
Humpenöder, F. et al. Large-scale bioenergy production: How to resolve sustainability trade-offs? Environ. Res. Lett. 13, https://doi.org/10.1088/1748-9326/aa9e3b (2018).
Schmitz, C. et al. Land-use change trajectories up to 2050: Insights from a global agro-economic model comparison. Agric. Econ. (UK) 45, 69–84 (2014).
Smith, P. et al. Competition for land. Philos. Trans. R. Soc. B Biol. Sci. 365, 2941–2957 (2010).
Von Lampe, M. et al. Why do global long-term scenarios for agriculture differ? An overview of the AgMIP global economic model intercomparison. Agric. Econ. (UK) 45, 3–20 (2014).
Prestele, R. et al. Hotspots of uncertainty in land-use and land-cover change projections: a global-scale model comparison. Glob. Change Biol. 22, 3967–3983 (2016).
Popp, A. et al. Land-use futures in the shared socio-economic pathways. Glob. Environ. Change 42, 331–345 (2017).
Alexander, P. et al. Assessing uncertainties in land cover projections. Glob. Change Biol. 23, 767–781 (2017).
FAOSTAT. FAOSTAT, Food and Agriculture Organization of the United Nations. http://www.fao.org/faostat (2017).
Riahi, K. et al. The Shared Socioeconomic Pathways and their energy, land use, and greenhouse gas emissions implications: an overview. Glob. Environ. Change 42, 153–168 (2017).
Marangoni, G. et al. Sensitivity of projected long-term CO2 emissions across the Shared Socioeconomic Pathways. Nat. Clim. Change 7, 113 (2017).
O’Neill, B. C. et al. The roads ahead: narratives for shared socioeconomic pathways describing world futures in the 21st century. Glob. Environ. Change 42, 169–180 (2017).
Eyring, V. et al. Overview of the Coupled Model Intercomparison Project Phase 6 (CMIP6) experimental design and organization. Geosci. Model Dev. 9, 1937–1958 (2016).
Rosenzweig, C. et al. Coordinating AgMIP data and models across global and regional scales for 1.5 °C and 2.0 °C assessments. Philos. Trans. R. Soc. A 376, 20160455 (2018).
Ruane, A. C., Phillips, M. M. & Rosenzweig, C. Climate shifts within major agricultural seasons for + 1.5 and + 2.0 °C worlds: HAPPI projections and AgMIP modeling scenarios. Agric. For. Meteorol. 259, 329–344 (2018).
Frieler, K. et al. Assessing the impacts of 1.5 C global warming–simulation protocol of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP2b). Geosci. Model Dev. 10, 4321–4345 (2017).
Kim, H. et al. A protocol for an intercomparison of biodiversity and ecosystem services models using harmonized land-use and climate scenarios. Geosci. Model Dev. 11, 4537–4562 (2018).
KC, S. & Lutz, W. The human core of the shared socioeconomic pathways: population scenarios by age, sex and level of education for all countries to 2100. Glob. Environ. Change 42, 181–192 (2017).
Dellink, R., Chateau, J., Lanzi, E. & Magné, B. Long-term economic growth projections in the Shared Socioeconomic Pathways. Glob. Environ. Change 42, 200–214 (2017).
Fujimori, S., Hasegawa, T., Masui, T. & Takahashi, K. Land use representation in a global CGE model for long-term simulation: CET vs. logit functions. Food Secur. 6, 685–699 (2014).
Calvin, K. et al. Trade-offs of different land and bioenergy policies on the path to achieving climate targets. Clim. Change 123, 691–704 (2014).
Havlík, P. et al. Crop productivity and the global livestock sector: Implications for land use change and greenhouse gas emissions. Am. J. Agric. Econ. 95, 442–448 (2012).
Stehfest, E., van Vuuren, D., Bouwman, L. & Kram, T. Integrated Assessment of Global Environmental hange with IMAGE 3.0: Model Description and Policy Applications (Netherlands Environmental Assessment Agency (PBL), 2014).
Woltjer, G. B. et al. The MAGNET Model – Module description (LEI, part of Wageningen University and Research Centre, The Hague, 2014).
Lotze‐Campen, H. et al. Global food demand, productivity growth, and the scarcity of land and water resources: a spatially explicit mathematical programming approach. Agric. Econ. 39, 325–338 (2008).
Robinson, S. et al. The International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT): Model Description for Version 3. IFPRI Discussion Paper 1483 (International Food Policy Research Institute (IFPRI), Washington DC, 2015).
IAASTD. Agriculture at a Crossroads: Global Report. (Island Press, Washington, DC, 2009).
Borgonovo, E. Sensitivity analysis with finite changes: an application to modified EOQ models. Eur. J. Oper. Res. 200, 127–138 (2010).
Verburg, R., Stehfest, E., Woltjer, G. & Eickhout, B. The effect of agricultural trade liberalisation on land-use related greenhouse gas emissions. Glob. Environ. Change 19, 434–446 (2009).
Stehfest, E., Berg, M., Woltjer, G., Msangi, S. & Westhoek, H. Options to reduce the environmental effects of livestock production - comparison of two economic models. Agric. Syst. 114, 38–53 (2013).
Pellegrini, P. & Fernández, R. J. Crop intensification, land use, and on-farm energy-use efficiency during the worldwide spread of the green revolution. Proc. Natl Acad. Sci. USA 115, 2335–2340 (2018).
Rogelj, J. et al. Scenarios towards limiting global mean temperature increase below 1.5 °c. Nat. Clim. Change 8, 325–332 (2018).
Phalan, B. T. What have we learned from the land sparing-sharing model? Sustainability (Switzerland) 10, 1760 (2018).
Camba Sans, G. H., Aguiar, S., Vallejos, M. & Paruelo, J. M. Assessing the effectiveness of a land zoning policy in the Dry Chaco. The Case of Santiago del Estero, Argentina. Land Use Policy 70, 313–321 (2018).
Valin, H. et al. The future of food demand: understanding differences in global economic models. Agric. Econ. 45, 51–67 (2014).
Leclere, D. et al. Towards Pathways Bending the Curve Terrestrial Biodiversity Trends within the 21st Century (IIASA, 2018).
Tilman, D. & Clark, M. Global diets link environmental sustainability and human health. Nature 515, 518 (2014).
Clark, M. & Tilman, D. Comparative analysis of environmental impacts of agricultural production systems, agricultural input efficiency, and food choice. Environ. Res. Lett. 12, 064016 (2017).
Springmann, M. et al. Options for keeping the food system within environmental limits. Nature 562, 519–525 (2018).
van Ittersum, M. K. et al. Yield gap analysis with local to global relevance—a review. Field Crops Res. 143, 4–17 (2013).
Havlík, P. et al. Climate change mitigation through livestock system transitions. Proc. Natl Acad. Sci. USA 111, 3709–3714 (2014).
Weindl, I. et al. Livestock and human use of land: productivity trends and dietary choices as drivers of future land and carbon dynamics. Glob. Planet. Change 159, 1–10 (2017).
Wise, M., Calvin, K., Kyle, P., Luckow, P. & Edmonds, J. Economic and physical modeling of land use in GCAM 3.0 and an application to agricultural productivity, land, and terrestrial carbon. Clim. Change Econ. 5, 1450003 (2014).
Hertel, T. W. Global Trade Analysis: Modeling and Applications (Cambridge Univ. Press, 1997).
Van Meijl, H., van Rheenen, T., Tabeau, A. & Eickhout, B. The impact of different policy environments on agricultural land use in Europe. Agric. Ecosyst. Environ. 114, 21–38 (2006).
Armington, P. S. A theory of demand for products distinguished by place of production. IMF Staff Pap. 16, 159–176 (1969).
Popp, A. et al. Land-use protection for climate change mitigation. Nat. Clim. Change 4, 1095–1098 (2014).
Kriegler, E. et al. Fossil-fueled development (SSP5): an energy and resource intensive scenario for the 21st century. Glob. Environ. change 42, 297–315 (2017).
Bondeau, A. et al. Modelling the role of agriculture for the 20th century global terrestrial carbon balance. Glob. Change Biol. 13, 679–706 (2007).
Bodirsky, B. L. et al. Global food demand scenarios for the 21st century. PLoS ONE 10, e0139201 (2015).
Schmitz, C. et al. Trading more food: implications for land use, greenhouse gas emissions, and the food system. Glob. Environ. Change 22, 189–209 (2012).
Dietrich, J. P., Schmitz, C., Lotze-Campen, H., Popp, A. & Müller, C. Forecasting technological change in agriculture—an endogenous implementation in a global land use model. Technol. Forecast. Soc. Change 81, 236–249 (2014).
Borgonovo, E. A methodology for determining interactions in probabilistic safety assessment models by varying one parameter at a time. Risk Anal. 30, 385–399 (2010).
Lamontagne, J. R. et al. Large ensemble analytic framework for consequence-driven discovery of climate change scenarios. Earth Future 6, 488–504 (2018).
Huber, V., Neher, I., Bodirsky, B. L., Höfner, K. & Schellnhuber, H. J. Will the world run out of land? A Kaya-type decomposition to study past trends of cropland expansion. Environ. Res. Lett. 9, 024011 (2014).
S.F. and T.H. were supported by Global Environmental Research Fund 2–1702 of the Ministry of Environment of Japan. K.W. acknowledges support from the CGIAR Research Programs PIM and CCAFS. B.L.B. and J.D. were supported by the European Union’s Horizon 2020 research and innovation program under grant agreement number 689150 (SIM4NEXUS). We thank Giacomo Marangoni for discussing methodological aspects with us in December 2016. Model comparison and analysis was supported and facilitated by the AgMIP global economics group.
The authors declare no competing interests.
Journal peer review information: Nature Communications thanks Roberto J. Fernández, Robert Gilmore Pontius, and other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Stehfest, E., van Zeist, WJ., Valin, H. et al. Key determinants of global land-use projections. Nat Commun 10, 2166 (2019). https://doi.org/10.1038/s41467-019-09945-w
This article is cited by
Sustainability Science (2023)
Contributions of healthier diets and agricultural productivity toward sustainability and climate goals in the United States
Sustainability Science (2023)
Nature Communications (2022)
Nature Food (2022)
Nature Food (2022)