Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Nanoprinting organic molecules at the quantum level


Organic compounds present a powerful platform for nanotechnological applications. In particular, molecules suitable for optical functionalities such as single photon generation and energy transfer have great promise for complex nanophotonic circuitry due to their large variety of spectral properties, efficient absorption and emission, and ease of synthesis. Optimal integration, however, calls for control over position and orientation of individual molecules. While various methods have been explored for reaching this regime in the past, none satisfies requirements necessary for practical applications. Here, we present direct non-contact electrohydrodynamic nanoprinting of a countable number of photostable and oriented molecules in a nanocrystal host with subwavelength positioning accuracy. We demonstrate the power of our approach by writing arbitrary patterns and controlled coupling of single molecules to the near field of optical nanostructures. Placement precision, high yield and fabrication facility of our method open many doors for the realization of novel nanophotonic devices.


The interaction of light and matter is usually described by the Hamiltonian \(\hat {\cal{H}} = {\hat{\mathbf{E}}} \cdot {\hat{\mathbf{D}}}\), where the \({\hat{\mathbf{E}}}\) and \({\hat{\mathbf{D}}}\) operators denote the electric field of light and the emitter dipole moment, respectively. Contrary to the simplistic considerations of university textbooks, which consider linearly polarized electromagnetic plane waves, \({\hat{\mathbf{E}}}\) has a very strong spatial and polarization distribution in nanophotonic applications. For example, the evanescent fields outside a microresonator or plasmonic nanostructure decay within about 10–100 nm and could rapidly change their polarization. Thus, an effective coupling between a quantum emitter and a photon demands nanometer accuracy in positioning the former with respect to the structure of interest that supports the latter. This requirement becomes more stringent if one aims to scale things up and exploit collective effects among several emitters and photons1,2.

Despite some interesting recent progress3,4,5,6,7,8,9, precise and deterministic integration of quantum emitters into optical systems remains a challenge. For inorganic materials, techniques such as molecular beam epitaxy, lithography, etching and ion implantation have been employed10,11,12,13,14,15. However, a universal and flexible solution is still not available, and in particular, the existing methods are not easily compatible with organic emitters. In this work, we show that the nanodripping mode of electrohydrodynamic printing16,17 enables deposition of organic dye molecules at will and close to optical nanostructures, with subwavelength accuracy, down to the single molecule level, and with well-defined orientation.


Single molecule nanoprinting process

We use a gold-coated pulled glass micropipette as printing nozzle to dispense ink onto a substrate (Fig. 1a). Controllable sequences of ink droplets are ejected from the nozzle by applying a DC voltage between the nozzle and a back electrode below the substrate (see Methods section). Electrostatic autofocusing of the ejected sub-attoliter sized droplets of ink ensures a precise placement of the printed material16. Printing at any desired location on the substrate can be achieved by moving it laterally relative to the printing nozzle.

Fig. 1

On-demand electrohydrodynamic printing of dye molecules in a host crystal. a Schematic representation of the printing process of the host material with embedded fluorescent molecules, showing sequentially the process of dropwise deposition, solvent evaporation and crystallization, capturing a single molecule in the crystallized deposit. A detailed schematic of the experimental setup is provided in the Supplementary Fig. 1. The drawing is not to scale. b A schematic representation of a printed array of nanocrystals with embedded fluorescent molecules and illumination direction and polarization. c Atomic force microscopy (AFM) images of four printed pT nanocrystals with varying deposition time tD. The scale bar is 200 nm

The ink used in this work was obtained by dissolving terrylene and para-terphenyl (pT) in small concentrations in 1,2,4-trichlorobenzene (see Methods section). Here, pT is to act as the nanoscopic host for a small number of terrylene molecules. Para-terphenyl is known to form crystalline matrices via sublimation (below its melting temperature of 487 K)18 or spin coating19. As we discuss below, we find that our printed nanostructures are also crystalline. This is achieved by the slow evaporation of the ink solvent, which is controlled by actively cooling the receiver substrate to a temperature close to the solvent melting point with a Peltier element. The slow evaporation of the solvent on the substrate is essential for achieving high crystallinity, in contrast to our previous nanoprinting work, where fast evaporation was necessary to avoid liquid accumulation16.

Figure 1b schematically shows a printed array of pT nanocrystals. The amount of the printed pT is controlled by the number of nanodrops deposited at a fixed location, the pT concentration in the ink, or by regulating the mass flow rate with the DC voltage amplitude. By optimizing both voltage amplitude and deposition time for a fixed material concentration, the lateral and vertical dimensions of the printed pT nanocrystals can reach down to 220 nm and 30 nm, respectively. Atomic force microscopy scans in Fig. 1c show the effect of the deposition time on the nanocrystal size. We note that for a volatile organic host material such as pT, sublimation in ambient conditions allows further downsizing of the nanocrystal to a few nanometers (see Supplementary Note 1). However, in this work, we avoid this process by protecting the nanocrystals with a thin polymer layer.

Optical and quantum optical characterization

By seeding the ink with a low concentration of terrylene as fluorescent dye, a small number of terrylene molecules can be deposited in a controlled fashion at specific positions, whereby the average number of molecules per printed nanocrystal can be tuned by adjusting the amount of the deposited ink or the concentration of the dye molecules. Terrylene in pT is a well-known system used for a variety of quantum optical studies19,20,21,22,23. In particular, it is known that terrylene embeds inside pT at well-defined sites and orientation19,24. Figure 2a shows a fluorescence image from an ordered array of printed spots of host material with embedded fluorescent molecules at a separation of 2 μm measured on a total internal reflection fluorescence (TIRF) microscope.

Fig. 2

Optical characterization of the printed dye molecules. a TIRF microscopy image of an ordered array of printed terrylene molecules embedded in pT nanocrystals on a glass substrate and protected from sublimation with a 100 nm thick poly(vinyl alcohol) layer. The scale bar is 2 μm. (see Supplementary Fig. 5 for a schematic of the optical setup). The neighboring nanocrystals can be placed at a distance down to 0.65 μm (see Supplementary Fig. 6). b Fluorescence spectrum of a printed terrylene molecule. c Back focal plane image of a printed terrylene molecule oriented with a polar angle of θ = 16.7 ± 0.5° to the substrate. d Histogram of angular orientation of the molecule embedded in the host crystal with respect to the surface normal direction as shown in the inset. e Histogram of the in-plane radial distribution of molecules around the mean position of the molecules, which ideally corresponds to the printing nozzle axis. The inset shows the measured normalized yield (crosses, normalized to the yield of achieving one molecule per printed spot) for a varying in-plane positioning accuracy compared to a numerical calculation (solid line) of random placement in a hemispherical, printed crystal with the same size. f Histogram of fluorescence count rates of printed single molecules. g Histogram of fluorescence lifetime fitted from continuous wave anti-bunching curves. The mean confidence interval of the fits is ± 0.7 ns. The inset in d is not shown to scale. The fluorescence image of the entire 10 × 10 array from a, and for the extracted data in d, e is shown in Supplementary Fig. 4. f, g are obtained at constant illumination of ~5000 W cm−2

The printed nanocrystals were protected from sublimation with a 100 nm thick poly(vinyl alcohol) (PVA) layer, which also helped to increase the average photostability of terrylene molecules. The majority of the printed molecules exhibited stable fluorescence over several minutes to hours or even days at ambient conditions, while a small fraction (less than 25%) bleached either immediately or after a few minutes of illumination at about 100 W cm−2 (See Supplementary Fig. 2 for more details). The observed photostability indicates the high quality of the formed host crystal and the seamless integration of the molecules in it19. We point out that the printed molecules could also withstand high illumination intensities up to saturation levels (see Supplementary Fig. 3).

The emission spectrum of a single printed molecule is shown in Fig. 2b with little to no background signal in agreement with the previously reported spectra of terrylene22. The back-focal plane image of the same molecule shown in Fig. 2c presents its angular distribution of emission corresponding to a dipole moment oriented at a small angle (here θ = 16.7 ± 0.5°) with respect to the normal to the substrate19. The histogram in Fig. 2d displays the distribution of the dipole orientations of the photostable (after few minutes) printed molecules from a 10 × 10 array (see Supplementary Fig. 4 for fluorescence image). This well-defined orientation of the printed molecules can also be directly recognized from the doughnut-shaped fluorescence images in Fig. 2a, which indicate a molecular emission dipole moment almost perpendicular to the substrate surface19 and are characteristic of terrylene in pT. This characteristic orientation of terrylene embedded in pT is a good indicator for the crystallinity of pT. The angular orientation of molecules in a spin-coated crystalline pT matrix shows a very similar dipole orientation distribution to that of molecules in nanoprinted pT. This is a strong indirect indication of the good crystallinity of the nanoprinted pT (see Supplementary Note 2).

The histogram in Fig. 2e shows the radial distribution of the photostable molecules with respect to the mean molecule position determined for the array of 10 × 10 printed spots. 43% of the molecules are found within a distance of 50 nm, and 90% within 120 nm from the mean position. In the vertical direction, the molecules are confined by the height of the nanocrystals, which can be as small as 30 nm (see Fig. 1c). From these results, the yield for a given accuracy of in-plane positioning can be calculated (see inset Fig. 2e). In-plane accuracies of down to ±20 nm can be obtained with a 10% normalized yield.

Figure 2f shows the distribution of fluorescence count rates measured from single printed molecules excited with the same illumination intensity. Below, we will elaborate on rigorous tests for identifying single molecules. The variation observed in Fig. 2f results from differences in quantum efficiency of the molecules23, molecular dipole orientation, or location of the molecule within the crystal. To examine the quantum optical properties of the printed single molecules further, we also performed fluorescence lifetime measurements using a Hanbury–Brown and Twiss (HBT) setup25. Figure 2g displays the distribution of the fluorescence lifetimes. While the lower value in the range of 4 ns corresponds to the expected fluorescence lifetime of terrylene in bulk pT, longer lifetimes are characteristic of molecules close to an interface and oriented normal to it26. In our case, we expect the subwavelength lateral dimension of the nanocrystal to also contribute to the longer lifetimes27,28.

To prove that we reach the fundamental quantized limit of printing matter, namely single molecules, we performed HBT experiments and analyzed the intensity time traces to deduce the second order correlation function g(2)(τ). Figure 3a displays the outcome with g(2)(0) = 0.12, which is well below the limit of 0.5 as the threshold for having fewer than two molecules according to \(g^{(2)}(0) = 1 - \frac{1}{m}\), where m denotes the number of quantum emitters25. The steady intensity trace in Fig. 3d supports this finding and shows the photostability of the molecule.

Fig. 3

Quantum optical characterization of the printed fluorescent molecules. Measured normalized second order correlation function of one (a), two (b), and three (c) dye molecules embedded in a host crystal. Fluorescence time traces and corresponding histograms showing a stable photon count of one printed molecule (d), a one-step bleaching event of two (e), and a two-step bleaching event of three molecules (f). g Measured values of g(2)(0) of photostable molecules with increasing deposition times. h Two molecules with an in-plane separation of 12 ± 5 nm in a single printed nanocrystal. The first panel (left) shows a fluorescence image of both molecules, the second shows the remaining molecule after the other has bleached. The third panel shows the image of the photobleached molecule obtained by subtracting the intensities in panel two from panel one. The scale bar is 200 nm. The rightmost panel shows a schematic of the two molecules in close proximity, based on the position and orientation from the localization analysis (the molecule size is enlarged by approximately 3.5 times for better visibility). See Supplementary Fig. 7 for fluorescence count rates and g(2)(τ) before and after photobleaching. i Probability analysis for printing vs. stochastically placing quantum emitters in specified areas. The expected yields are shown for the example of placing a number of emitters in the vicinity of a 10 μm long waveguide structure as shown in the inset (See Supplementary Note 3 for details on the calculation). Lines are drawn as a guide to the eye. In af pulsed excitation at 6.25 MHz was used and in g and h continuous wave excitation was used

The ability to deposit a single fluorescent molecule at a well-defined position is a long-sought and significant step towards nanophotonic devices, e.g., for single photon generation. However, as quantum technologies emerge, there will be an increasing demand for controlled realization of few-photon and few-emitter systems for scaling purposes and more sophisticated quantum state generations2,29. We now show that by varying the deposition time, we are able to adjust the statistical mean of the number of molecules per printed nanocrystal and, therefore, deposit multiples of molecules in close proximity. Figure 3b, c present the measured g(2)(τ) from two representative printed spots, reaching g(2)(0) = 0.51 and g(2)(0) = 0.64, indicating two and three printed molecules, respectively. Accordingly, the fluorescence time traces of the printed molecules in Fig. 3e, f display one and two-step bleaching events.

To examine the dependence of the printed molecule number on the deposition time, in Fig. 3g we present g(2)(0) values for many nanocrystals. The observed trend of increasing g(2)(0) with longer deposition times agrees with the expected increase in the mean number of printed molecules per spot, demonstrating that the mean number of molecules can be controlled. We note that measurement non-idealities such as the background signal, noise, varying quantum efficiency of emitters and blinking can result in deviations in the g(2)(0) value.

Using stepwise bleaching localization microscopy30, in Fig. 3h we resolve two molecules in the same nanocrystal at a lateral separation of 12 ± 5 nm (see Supplementary Fig. 7, for more details). This close proximity can be used to couple two or more molecules via near-field dipole-dipole interaction at much greater yield than the stochastic approach exploited previously31. Assuming a random distribution in a rectangular cuboid crystal, the normalized yield for obtaining a certain separation between two molecules can be estimated (see Supplementary Fig. 8). By reducing the lateral dimension of the crystal, normalized yields exceeding 34% may be reached for separations as small as 12 nm.

A critical issue in many nano-optical experiments is to find a balance between a high success rate in studying a controlled number of emitters versus the risk of a high background fluorescence from unwanted emitters5. Figure 3i compares the expected yield of placing single molecules at specified positions by printing with that of stochastic distribution for the example of a nanowire. In this case, we obtain the probabilities of 33% for coupling a single emitter or 4% for simultaneously coupling three emitters to the nanowire at specified locations (see Supplementary Note 3). These success rates are orders of magnitude higher than the values of 0.5% and 8 × 10−5% expected for randomly placing molecules.

Coupling molecules to nanophotonic structures

We now present two examples of applications for coupling molecules to photonic nanostructures. Figure 4a displays the bright-field image of a single crystalline silver nanowire with a diameter of approximately 80 nm. In Fig. 4a, we show the fluorescence image of a single terrylene molecule printed on the nanowire imaged with a tightly focused excitation beam. Antibunching measurements, fluorescence spectrum, and the doughnut shaped image of the molecule clearly point to an oriented single terrylene molecule. To investigate the coupling of the molecular emission to the nanowire, we recorded the fluorescence at the end of the nanowire, as shown in Fig. 4a. Attribution of this light to the molecule was verified by the correlated intermittency of the molecular fluorescence and the out-coupled light, and by recording an image after deliberate photobleaching. Furthermore, we observed a significant shortening of the mean lifetime of the molecules coupled to nanowires. A comparison of the fluorescence intensities suggests an apparent coupling efficiency of up to 6.2% into the surface plasmon mode, which, in fact, would be up to 3–5 times larger (i.e., 18–30%) when accounting for ohmic losses in the nanowire as done in previous studies32. Figure 4b shows the simulated coupling efficiency and Purcell factor for different positions of the molecule in the host crystal and close to the silver nanowire. Simulations are shown only inside the pT crystal (within the border shown by the solid lines) and were performed for a dipole moment vertical to the substrate and a nanowire of 80 nm in diameter. Both the size of the nanowire and the printed host nanocrystal were measured from AFM scans on the PVA-coated structure. More information about the simulations is available in the Methods section. Based on these simulations a distance of 45–70 nm between the molecule and the nanowire surface is estimated. For more details on the discussion above, see Supplementary Note 4.

Fig. 4

On-demand printing of molecules near nanophotonic structures and in arbitrary patterns. a Bright-field (BF) and fluorescence (FL) image of a molecule printed on a single crystalline silver nanowire. The same fluorescence image is shown with the intensities scaled by 12× (FL 12×), where the out-coupled light is clearly visible. The faint fluorescence spot at the left end of the nanowire is due to coupling of the photons to the opposite direction and its lower intensity is attributed to larger propagation losses in that direction. The scale bar is 2 μm. b Simulated coupling efficiency and Purcell factor depending on the location of the molecule with respect to the silver nanowire. The dashed white lines correspond to a coupling efficiency of 30%. Calculations were performed for a vertically oriented dipole inside the printed pT nanocrystal (with its border shown by the solid black lines) and a nanowire of 80 nm diameter. The scale bars are 30 nm. c Bright-field (BF) and fluorescence (FL 5×) images of molecules printed on a TiO2 waveguide with focused laser illumination. Fluorescence images are scaled by 5x in intensity with respect to full scale for better visibility. The red circles mark the location of the printed nanocrystals. The scale bar is 4 μm. d Simulated coupling efficiency depending on the location of the molecule with respect to the TiO2 waveguide. The white dashed line represents the possible location of the molecule based on the measured coupling efficiency of 12%. Calculations were performed for a vertically oriented dipole inside the printed pT nanocrystal (with its border shown by the solid black lines). The scale bar is 100 nm. e Fluorescence image of printed terrylene molecules on a glass substrate composing collectively the molecular structure of terrylene. The dashed, eye-guiding line aids the recognition of the outline of the molecular structure of terrylene. The scale bar is 2 μm

As a second example, we coupled a terrylene molecule to a subwavelength dielectric waveguide made of TiO2, which offers an efficient avenue for minimizing propagation losses associated with plasmonic structures. Figure 4c shows a bright-field image of a waveguide, which is 200 nm wide and 180 nm high with integrated grating couplers, and a fluorescence image of several printed molecules in its vicinity under focused illumination. The excitation light triggers a photon emission, which partially couples to the waveguide mode and is out-coupled at both ends. Here too, the signal at the grating couplers vanishes after the photobleaching of the molecule, confirming the coupling of the molecule emission to the waveguide mode (See Supplementary Note 5). From the measurement, a coupling efficiency of 12% is estimated. Figure 4d shows the simulated coupling efficiency for different positions of the molecule inside the host crystal with respect to the TiO2 waveguide. Based on these simulations, the distance between the molecule and the waveguide surface is estimated to be 65 ± 5 nm.

We find that for the case of the silver nanowire an uncertainty in positioning of the molecule within the crystal shown in Fig. 4b can result in a coupling efficiency variation in the range of 20–40%. For the TiO2 ridge waveguide, we expect a variation of 6–32% in the coupling efficiency. This indicates that, for a nanoscopic crystal printed on top of the waveguides, the molecule would be coupled to the waveguides with high reproducibility.

Furthermore, our open-atmosphere, maskless, fabrication method is capable of placing molecules in any arbitrary pattern, such as the chemical structure of a terrylene molecule shown in Fig. 4e.


We have presented a method for versatile printing of a countable number of terrylene molecules within a nanoscopic volume on different substrates (metalic, inorganic, flexible; see also Supplementary Fig. 9) and structures. This work represents a remarkably higher level of control and scalability in placement of single quantum emitters, in comparison to previous reports, where deposition of quantum emitters in large numbers33,34,35,36, or uncontrollably at random37 was demonstrated. A comparison of different methods for single quantum emitter placement is given in Supplementary Table 1. The printing performance can be further improved in several ways. The positioning uncertainty of the deposited molecules can be reduced by lowering the crystal size. This can be achieved by adjusting the ink concentration or by means of post-sublimation. Moreover, one can improve the yields close to 100% by implementing a monitoring mechanism to determine the number of photostable molecules, e.g., via in-situ fluorescence measurement while printing, and repeating the printing step. Furthermore, the method can be readily extended to other molecule-host systems38 and be combined with printing of nanostructures such as optical nanoantennas or nanowires16 in a single platform.

Our demonstrated achievements open the doors for the efficient production of nanophotonic devices based on single molecules, such as single-photon guns23. In particular, our printing method can be used for coupling a larger number of molecules along an optical circuit or extended structure, e.g., for the realization of devices for quantum information processing39, polaritonic states2 or quantum metamaterials and networks29. Furthermore, one can place several molecules in subwavelength vicinity of each other for achieving controlled coherent coupling31 and for the efficient generation of multiphoton states when coupled to suitable optical antennas31,32. Given the existing crystallinity of the pT matrix and possible further improvement through post-annealing40, we expect good coherence properties of the printed terrylene molecules at cryogenic temperatures. In all the applications mentioned above, the placement accuracy, flexibility of combination with different materials and the simplicity of our method will be an invaluable asset.



The nanocrystals are deposited by electrohydrodynamic nanoprinting, where desired sequences of nanodroplets are deposited sequentially on a substrate by applying a DC voltage between the printing nozzle and a back electrode below the substrate, and realizing and exploiting a rapid nanodripping droplet generation mode16,17. The printing nozzle consists of a borosilicate capillary (World Precision Instruments TW100-4) that is pulled (Sutter Model P-97) to nozzle openings ranging between 1 and 2 μm which is subsequently coated with 5 nm titanium for adhesion and 50 nm gold by electron beam evaporation. The ink consists of a 1:57 mixture of 0.06% saturated terrylene and pT (2.3 mg ml−1) each dissolved in 1,2,4-trichlorobenzene. For printing, samples were placed on a Peltier cooled sample holder (sample temperature 16.5 °C), which includes an ITO-coated glass piece as back electrode below the substrate. With the backfilled nozzle in close proximity (4–5 μm) of the substrate surface and applying a DC voltage (200–230 V) for a specified deposition time ranging between 1 and 3 s, nanodroplets are ejected from the nozzle onto the substrate. The ink composition, sample temperature and the ejection rate of nanodroplets are optimized such that a nanoscale pool of ink accumulates on the substrate and by slow evaporation of the ink solvent, a material with high crystallinity is formed, ensuring the seamless integration of terrylene into the pT host. To accurately move the sample in the in-plane and out-of-plane directions, while the nozzle is held at a fixed position, a piezo and a motorized micro translation stage were used. Optical access during printing is provided by an inverted scanning interference microscope and a side view with a long working distance objective. Details on the main features of the experimental setup for electrohydrodynamic printing can be found elsewhere16.

Sample fabrication

The structures were fabricated on a borosilicate glass coverslip that was extensively cleaned before printing by sonication in acetone, isopropyl alcohol (IPA) and deionized water for 20 min each and then by O2 plasma cleaning. After printing, the nanocrystals were protected from sublimation by spin-coating a 100 nm thick layer of poly(vinyl alcohol). For printing on silver nanowires, nanowires (average diameter 130 nm) in isopropyl alcohol solution were spin-coated onto a clean glass coverslip. Molecules with their host crystal were printed directly onto the wires by localizing the nanowire and the printing nozzle through the bottom microscope objective. Dielectric waveguides were written by electron beam lithography in negative tone resist and reactive ion etching was used to transfer the pattern into a 180 nm thick TiO2 layer deposited on a glass substrate.


The samples were analyzed on a home-built total internal reflection fluorescence microscope with an oil immersion objective (NA = 1.4), continuous wave illumination (wavelength 532 nm) and an EMCCD camera (Andor iXon 888). Supplementary Fig. 5 shows the experimental setup. All measurements have been carried out at room temperature and ambient conditions. The position and dipole orientation of the molecules were determined by comparing the measured images to the theoretically calculated point spread function of an oriented dipole at an interface and applying a maximum likelihood estimate41 for each printed spot. Photon correlation measurements were performed with pulsed (6.25 MHz) or continuous wave excitation (wavelength 532 nm) with a Hanbury–Brown and Twiss setup with two single photon detectors (MPD PD-050-CTB and ID Quantique ID100-50). For the measurement of the dielectric waveguides a 100× air objective was used. Atomic force microscopy scans were performed within 6 h after printing.


Numerical simulations of the coupling of molecules to silver nanowires or TiO2 waveguides were performed using the finite-difference time-domain method (FDTD). The simulated structures consist of a silver nanowire or a rectangular TiO2 waveguide on a glass substrate covered with a 100 nm thick PVA layer. The molecules are modeled as a vertically oriented dipole source. The optical properties of silver nanowires are taken from literature values for polycrystalline silver42, the glass substrate is described with a refractive index n = 1.53, TiO2 with n = 2.4, PVA with n = 1.48 and pT with n = 1.6. Perfectly matched layers are applied as boundary conditions on all sides of the simulated structures. Simulations are stopped when the total power in the simulation domain has decreased below a fraction of 10−6 of the total injected power. For the nanowire, the coupling efficiency is determined by integrating the Poynting vector over a cross-sectional area perpendicular to the wire at an axial distance of 3 μm from the dipole along the nanowire, and correcting for the dissipation in the nanowire. The Purcell factor is calculated by dividing the radiated power of the dipole in the presence of the nanowire by the radiated power of the dipole on a substrate embedded in a 100 nm PVA layer. For the TiO2 waveguide the coupling efficiency is determined by integrating the Poynting vector over an area perpendicular to the wire at an axial distance of 3 μm from the dipole along the waveguide.

Data availability

The data that support the plots within this paper and other findings of this study are available from the corresponding authors upon reasonable request.


  1. 1.

    Goban, A. et al. Superradiance for atoms trapped along a photonic crystal waveguide. Phys. Rev. Lett. 115, 063601 (2015).

    ADS  CAS  Article  Google Scholar 

  2. 2.

    Haakh, H. R., Faez, S. & Sandoghdar, V. Polaritonic normal-mode splitting and light localization in a one-dimensional nanoguide. Phys. Rev. A 94, 053840 (2016).

    ADS  Article  Google Scholar 

  3. 3.

    Kühn, S., Håkanson, U., Rogobete, L. & Sandoghdar, V. Enhancement of single-molecule fluorescence using a gold nanoparticle as an optical nanoantenna. Phys. Rev. Lett. 97, 017402 (2006).

    ADS  Article  Google Scholar 

  4. 4.

    Rivoire, K. et al. Lithographic positioning of fluorescent molecules on high-Q photonic crystal cavities. Appl. Phys. Lett. 95, 123113 (2009).

    ADS  Article  Google Scholar 

  5. 5.

    Kinkhabwala, A. et al. Large single-molecule fluorescence enhancements produced by a bowtie nanoantenna. Nat. Photonics 3, 654–657 (2009).

    ADS  CAS  Article  Google Scholar 

  6. 6.

    Acuna, G. P. et al. Fluorescence enhancement at docking sites of DNA-directed self-assembled nanoantennas. Science 338, 506–510 (2012).

    ADS  CAS  Article  Google Scholar 

  7. 7.

    Funke, J. J. & Dietz, H. Placing molecules with Bohr radius resolution using DNA origami. Nat. Nanotechnol. 11, 47–52 (2016).

    ADS  CAS  Article  Google Scholar 

  8. 8.

    Gopinath, A., Miyazono, E., Faraon, A. & Rothemund, P. W. K. Engineering and mapping nanocavity emission via precision placement of DNA origami. Nature 535, 401–405 (2016).

    ADS  CAS  Article  Google Scholar 

  9. 9.

    Chikkaraddy, R. et al. Mapping nanoscale hotspots with single-molecule emitters assembled into plasmonic nanocavities using DNA origami. Nano Lett. 18, 405–411 (2017).

    ADS  Article  Google Scholar 

  10. 10.

    Meijer, J. et al. Generation of single color centers by focused nitrogen implantation. Appl. Phys. Lett. 87, 261909 (2005).

    ADS  Article  Google Scholar 

  11. 11.

    Badolato, A. et al. Deterministic coupling of single quantum dots to single nanocavity modes. Science 308, 1158–1161 (2005).

    ADS  CAS  Article  Google Scholar 

  12. 12.

    Toyli, D. M., Weis, C. D., Fuchs, G. D., Schenkel, T. & Awschalom, D. D. Chip-scale nanofabrication of single spins and spin arrays in diamond. Nano Lett. 10, 3168–3172 (2010).

    ADS  CAS  Article  Google Scholar 

  13. 13.

    Benson, O. Assembly of hybrid photonic architectures from nanophotonic constituents. Nature 480, 193–199 (2011).

    ADS  CAS  Article  Google Scholar 

  14. 14.

    Curto, A. G. et al. Multipolar radiation of quantum emitters with nanowire optical antennas. Nat. Commun. 4, 2769 (2013).

    Article  Google Scholar 

  15. 15.

    Santhosh, K., Bitton, O., Chuntonov, L. & Haran, G. Vacuum Rabi splitting in a plasmonic cavity at the single quantum emitter limit. Nat. Commun. 7, 11823 (2016).

    ADS  Article  Google Scholar 

  16. 16.

    Galliker, P. et al. Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets. Nat. Commun. 3, 1891 (2012).

    Article  Google Scholar 

  17. 17.

    Schneider, J. et al. Site-specific deposition of single gold nanoparticles by individual growth in electrohydrodynamically-printed attoliter droplet reactors. Nanoscale 7, 9510–9519 (2015).

    ADS  CAS  Article  Google Scholar 

  18. 18.

    Orrit, M. & Bernard, J. Single pentacene molecules detected by fluorescence excitation in a p-terphenyl crystal. Phys. Rev. Lett. 65, 2716–2719 (1990).

    ADS  CAS  Article  Google Scholar 

  19. 19.

    Pfab, R. J. et al. Aligned terrylene molecules in a spin-coated ultrathin crystalline film of p-terphenyl. Chem. Phys. Lett. 387, 490–495 (2004).

    ADS  CAS  Article  Google Scholar 

  20. 20.

    Kummer, S., Basché, T. & Bräuchle, C. Terrylene in p-terphenyl: a novel single crystalline system for single molecule spectroscopy at low temperatures. Chem. Phys. Lett. 229, 309–316 (1994).

    ADS  CAS  Article  Google Scholar 

  21. 21.

    Lounis, B. & Moerner, W. E. Single photons on demand from a single molecule at room temperature. Nature 407, 491–493 (2000).

    ADS  CAS  Article  Google Scholar 

  22. 22.

    Lee, K. G. et al. A planar dielectric antenna for directional single-photon emission and near-unity collection efficiency. Nat. Photonics 5, 166–169 (2011).

    ADS  CAS  Article  Google Scholar 

  23. 23.

    Chu, X. L., Götzinger, S. & Sandoghdar, V. A single molecule as a high-fidelity photon gun for producing intensity-squeezed light. Nat. Photonics 11, 58–62 (2017).

    ADS  CAS  Article  Google Scholar 

  24. 24.

    Bordat, P. & Brown, R. Molecular mechanisms of photo-induced spectral diffusion of single terrylene molecules in p terphenyl. J. Chem. Phys. 116, 229–236 (2002).

    ADS  CAS  Article  Google Scholar 

  25. 25.

    Loudon, R. The Quantum theory of light. (Oxford University Press, Oxford, 2003).

  26. 26.

    Kreiter, M., Prummer, M., Hecht, B. & Wild, U. P. Orientation dependence of fluorescence lifetimes near an interface. J. Chem. Phys. 117, 9430–9433 (2002).

    ADS  CAS  Article  Google Scholar 

  27. 27.

    Schniepp, H. & Sandoghdar, V. Spontaneous emission of europium ions embedded in dielectric nanospheres. Phys. Rev. Lett. 89, 257403 (2002).

    ADS  Article  Google Scholar 

  28. 28.

    Rogobete, L., Schniepp, H., Sandoghdar, V. & Henkel, C. Spontaneous emission in nanoscopic dielectric particles. Opt. Lett. 28, 1736–1738 (2003).

    ADS  Article  Google Scholar 

  29. 29.

    Chang, D. E., Douglas, J. S., González-Tudela, A., Hung, C.-L. & Kimble, H. J. Colloquium: Quantum matter built from nanoscopic lattices of atoms and photons. Rev. Mod. Phys. 90, 031002 (2018).

    ADS  MathSciNet  CAS  Article  Google Scholar 

  30. 30.

    Gordon, M. P., Ha, T. & Selvin, P. R. Single-molecule high-resolution imaging with photobleaching. Proc. Natl Acad. Sci. 101, 6462–6465 (2004).

    ADS  CAS  Article  Google Scholar 

  31. 31.

    Hettich, C. et al. Nanometer resolution and coherent optical dipole coupling of two individual molecules. Science 298, 385–390 (2002).

    CAS  Article  Google Scholar 

  32. 32.

    Akimov, A. V. et al. Generation of single optical plasmons in metallic nanowires coupled to quantum dots. Nature 450, 402–406 (2007).

    ADS  CAS  Article  Google Scholar 

  33. 33.

    Kress, S. J. P. et al. Near-field light design with colloidal quantum dots for photonics and plasmonics. Nano Lett. 14, 5827–5833 (2014).

    ADS  CAS  Article  Google Scholar 

  34. 34.

    Bergert, M. et al. Confocal reference free traction force microscopy. Nat. Commun. 7, 12814 (2016).

    ADS  CAS  Article  Google Scholar 

  35. 35.

    Richner, P. et al. Full-spectrum flexible color printing at the diffraction limit. ACS Photonics 3, 754–757 (2016).

    CAS  Article  Google Scholar 

  36. 36.

    Brechbühler, R. et al. Two-dimensional drexhage experiment for electric- and magnetic-dipole sources on plasmonic interfaces. Phys. Rev. Lett. 121, 113601 (2018).

    ADS  Article  Google Scholar 

  37. 37.

    Kress, S. J. P. et al. Wedge waveguides and resonators for quantum plasmonics. Nano Lett. 15, 6267–6275 (2015).

    ADS  CAS  Article  Google Scholar 

  38. 38.

    Pazzagli, S. et al. Self-assembled nanocrystals of polycyclic aromatic hydrocarbons show photostable single-photon emission. ACS Nano 12, 4295–4303 (2018).

    CAS  Article  Google Scholar 

  39. 39.

    Kok, P. et al. Linear optical quantum computing with photonic qubits. Rev. Mod. Phys. 79, 135–174 (2007).

    ADS  CAS  Article  Google Scholar 

  40. 40.

    Gerhardt, I. et al. Strong extinction of a laser beam by a single molecule. Phys. Rev. Lett. 98, 033601 (2007).

    ADS  CAS  Article  Google Scholar 

  41. 41.

    Mortensen, K. I., Churchman, L. S., Spudich, J. A. & Flyvbjerg, H. Optimized localization analysis for single-molecule tracking and super-resolution microscopy. Nat. Methods 7, 377–381 (2010).

    CAS  Article  Google Scholar 

  42. 42.

    Palik, E. D. Handbook of Optical Constants of Solids. (Academic Press, Cambridge, 1998).

Download references


We would like to thank Andreas Reichmuth for his help with the silver nanowires. This work was partially supported by the Swiss National Science Foundation under Grant Nr. 200021_162855.

Author information




H.E. conceived the topic of printing fluorescence molecules. C.U.H. and C.H. performed optical measurements and analyzed the results. C.U.H. performed continuous wave quantum optical measurements and analyzed the results. C.H and P.R. performed initial explorative studies. K.M. performed pulsed quantum optical studies and analyzed that data, supervised by V.S., J.R. fabricated the waveguide structures. H.E. and D.P. supervised all aspects of the project and discussed results. C.U.H., H.E., D.P., and V.S. wrote the manuscript. All authors commented on the manuscript.

Corresponding author

Correspondence to Hadi Eghlidi.

Ethics declarations

Competing interests

D.P. is involved with a start-up company (SCRONA) that is attempting to commercialize Electrohydrodynamic Nanoprinting. The remaining authors declare no competing interests.

Additional information

Journal peer review information: Nature Communications thanks Costanza Toninelli and other anonymous reviewer(s) for their contribution to the peer review of this work.

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Hail, C.U., Höller, C., Matsuzaki, K. et al. Nanoprinting organic molecules at the quantum level. Nat Commun 10, 1880 (2019).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing