Effective thermal management is critical for the operation of many modern technologies, such as electronic circuits, smart clothing, and building environment control systems. By leveraging the static infrared-reflecting design of the space blanket and drawing inspiration from the dynamic color-changing ability of squid skin, we have developed a composite material with tunable thermoregulatory properties. Our material demonstrates an on/off switching ratio of ~25 for the transmittance, regulates a heat flux of ~36 W/m2 with an estimated mechanical power input of ~3 W/m2, and features a dynamic environmental setpoint temperature window of ~8 °C. Moreover, the composite can manage one fourth of the metabolic heat flux expected for a sedentary individual and can also modulate localized changes in a wearer’s body temperature by nearly 10-fold. Due to such functionality and associated figures of merit, our material may substantially reduce building energy consumption upon widespread deployment and adoption.
Effective management of heat transfer enables the operation of many ubiquitous modern technologies, including electronic circuits1, aircraft and spacecraft components2, clinical warming devices3, power generation platforms4, shipping and packaging containers5, specialty textiles and garments6, and building environment control systems7. Within this context, building operation accounts for ~40% of global energy consumption (with heating and cooling alone requiring ~36% of this amount)7,8, and as such, the development of novel personal (localized or wearable) thermoregulatory platforms represents an exciting opportunity and can dramatically diminish energy use worldwide9. To date, the great variety and abundance of indoor thermal management systems have been classified as either “passive” or “active,” depending on the underlying mode of operation10,11,12,13. Specifically, representative passive heating technologies, such as insulation, textiles, and reflective coatings, employ materials with low thermal conductivities and/or high infrared reflectances, and thus regulate temperature by blocking heat transfer (Supplementary Table 1). These systems are low cost, energy efficient, and simple to implement but are also static and unresponsive to changing conditions10,11,12,13. In contrast, representative active heating technologies, such as electrothermal devices and heating/ventilation/air conditioning platforms, regulate temperature by driving the flow of heat through the external input of electrical and/or mechanical energy (Supplementary Table 1). These systems are dynamic and readily allow for user control but are also relatively expensive, energy inefficient, and complex to install10,11,12,13. Consequently, it is highly desirable to develop an “ideal” thermal management platform that merges the advantages of passive systems (i.e., low cost, straightforward implementation, and energy efficiency) with the on-demand dynamic control capabilities of active systems.
Among passive thermal management systems, the “space blanket,” which was introduced by NASA in the 1960s to mitigate temperature fluctuations in space, represents arguably one of the most famous and impactful wearable technologies reported to date (Fig. 1a)14. In its standard configuration, the space blanket consists of a plastic sheet (e.g., polyethylene terephthalate) overlaid with a thin continuous layer of metal (e.g., aluminum) (Fig. 1a, inset and Fig. 1b, left)—an architecture that is highly effective at reflecting infrared radiation (e.g., heat)14. Various incarnations of the space blanket have found applications in packaging, emergency portable shelters, clinical warming devices, and protective or performance apparel3,5,6,14,15,16,17. However, the space blanket’s application scope has been limited by its static thermal properties, which cannot be reconfigured on demand or adjusted in any way (Fig. 1b). Indeed, as a technology, the space blanket has remained fundamentally unchanged over the past 50 years14.
Among active thermal management systems, recent state-of-the-art efforts have focused on the development of components with switching capabilities18,19,20. These devices consist of stimuli-responsive materials, e.g., metal oxide layers or conducting polymer films, which are placed within a gap or junction (Supplementary Table 2)18,19,20. In such configurations, the heat transferred through (by) the material is dynamically modulated (switched) with an external non-thermal input, e.g., a mechanical pressure or an applied voltage (Supplementary Table 2)18,19,20. Thermal switches (and analogous components) have been touted as promising for applications like refrigeration and energy storage but are rarely mentioned within the context of personal thermal management18,19,20. Indeed, for effective implementation in wearable thermoregulatory systems, thermal switches must satisfy numerous demanding criteria, including ease of manufacturing over large areas, a straightforward actuation method, reversibility and tunability without hysteresis, stability to repeated cycling, a soft and stretchable form factor, rapid response time, a high on/off ratio, and a low operating temperature (Supplementary Table 2). Thus far, no single thermal switching technology has been shown to simultaneously possess all of these characteristics.
The fascinating dynamic color-changing skin of coleoid cephalopods (squid, octopuses, and cuttlefish) represents a judicious source of inspiration for next-generation adaptive thermal management systems (Fig. 1c)21,22,23. As one example, squid skin consists of multiple layers, one of which contains embedded red, yellow, and brown chromatophore organs (Fig. 1c, inset and Fig. 1d, left)24,25,26,27. The organs, which are arranged in an arrayed pattern, consist of a central pigment cell ringed by innervated muscle cells24,25,26,27. This highly evolved natural architecture allows for the pigment cells to be dynamically switched by the muscle cells between contracted point-like and expanded plate-like states, thereby modulating the local coloration and changing the transmission of light through the skin (Fig. 1d)24,25,26,27. Accordingly, the unique structure and function of cephalopod skin has motivated the engineering of various unconventional color- and appearance-changing technologies, including biomimetic soft active surfaces28, optoelectronic displays29, electromechanochemically responsive elastomers30, stretchable electroluminescent materials31, and adaptive infrared camouflage32. In this regard, natural squid skin and its constituent components exhibit nearly all of the capabilities required for wearable thermal switches (Supplementary Table 2), making them promising models for novel thermoregulatory platforms.
Herein, we draw inspiration from the static infrared-reflecting space blanket and active color-changing squid skin to design and develop a tunable thermoregulatory material. First, we fabricate a bioinspired composite material via common manufacturing techniques. Next, we characterize the composite’s mechanical characteristics and ability to manage infrared radiation. Subsequently, we model and evaluate our material’s stimuli-responsive thermal management properties. Last, we demonstrate its ability to regulate human body temperature in a wearable configuration. Overall, the composite material may shift energy consumption paradigms for a variety of modern technologies.
We envisioned a personal thermal management technology, which would leverage the static infrared-reflecting configuration of the space blanket and draw inspiration from the dynamic color-changing mechanisms intrinsic to squid skin (Fig. 1e). We thus designed a composite material comprised of (1) a soft and stretchable infrared-transparent polymer matrix and (2) an overlaid array of infrared-reflecting metal domains stably anchored within the matrix via columnar nanostructures (Fig. 1e, inset and Fig. 1f, left). In our design, the polymer matrix emulates the chromatophore-containing transparent dermal layer of squid, while the metal domains emulate the embedded chromatophore organs themselves. Prior to any mechanical actuation, the nanostructure-anchored, infrared-reflecting metal domains are densely packed and completely cover the underlying matrix (Fig. 1f, left), in similar fashion to how expanded plate-like chromatophores are overlapped in squid skin (Fig. 1d, left). The composite material thus reflects nearly all incident infrared radiation (Fig. 1f, left), in analogy to the arrays of overlapped chromatophores reflecting visible light of specific wavelengths (Fig. 1d, left). However, upon mechanical actuation, the anchored metal domains become spread apart and uncover portions of the stretched underlying polymer matrix (Fig. 1f, right), in similar fashion to how contracted point-like chromatophores are separated in squid skin (Fig. 1d, right). The composite material thus transmits a significant fraction of the incident infrared radiation (Fig. 1f, right), in analogy to arrays of contracted chromatophores transmitting relatively more visible light (Fig. 1d, right). In essence, mechanical actuation (stretching) reversibly changes the surface microstructure of our composite material and thus dynamically alters its ability to transmit and reflect infrared radiation (e.g., heat). The general design simultaneously encompasses the desirable technical advantages of the space blanket (i.e., straightforward low-cost manufacturability and outstanding energy efficiency) and the unique natural characteristics of squid skin (i.e., a favorable form factor and on-demand controllability).
We began our experiments by fabricating the desired thermoregulatory composite material according to the scheme in Fig. 2a. Here, we prepared samples with areas of >~160 cm2 by using common laboratory techniques and methods that would ultimately allow for larger-area manufacturing on an industrial scale. In brief, we electron-beam evaporated an infrared-reflecting, nanostructured copper film onto a support substrate via a two-step oblique angle deposition process (Fig. 2a, left)33, obtaining arrayed tilted nanoscale columns that emerged from an underlying continuous metal (copper) coating, as confirmed by top–down scanning electron microscopy (SEM) (Fig. 2b and Supplementary Fig. 1). Next, we spincast an infrared-transparent styrene–ethylene–butylene–styrene (SEBS) copolymer34,35 directly onto the nanostructured metal layer (Fig. 2a, middle), stably anchoring the copper columns within this elastomer, as confirmed by cross-sectional SEM (Fig. 2c and Supplementary Fig. 1). Subsequently, we heat-treated and delaminated the resulting composite from the support substrate to obtain a free-standing material (Fig. 2a, right), which featured a fractured, multi-domain copper coating on one side, as confirmed by top–down SEM (Fig. 2d). Overall, the described robust, high-yield procedure furnished a uniform and relatively large-area composite analogous to the one envisioned in Fig. 1e, f.
Infrared and mechanical characterization
We initially characterized our composites’ mechanical properties via tensile testing, while also evaluating their surface microstructure at different applied strains. For our composites, the engineering stress vs. engineering strain curves revealed that they behaved like soft and stretchable elastomers, with an average elastic modulus of ~2 MPa and an elongation at break of ~700% (Supplementary Fig. 2). In their relaxed state, the composites were visibly opaque and highly reflective, as indicated by digital camera imaging, and their surfaces consisted of a dense arrangement of abutting, irregularly shaped metal domains, which completely covered the underlying polymer matrix, as confirmed by SEM and energy dispersive spectroscopy (EDS) (Fig. 3a, left and Fig. 3b). However, under a strain of 30%, the composites became partially transparent and less reflective, as indicated by digital camera imaging, and their surfaces consisted of a sparser arrangement of metal domains that were proximal to but not directly contacting one another, revealing some of the underlying strained polymer matrix, as confirmed by SEM and EDS (Fig. 3a, middle and Fig. 3c). Under a larger strain of 50%, the composites further increased their visual transparency and appeared even less reflective, as indicated by digital camera imaging, and their surfaces consisted of an arrangement of metal domains that were spread farther apart from each other, uncovering even more of the underlying strained polymer matrix, as confirmed by SEM and EDS (Fig. 3a, right and Fig. 3d). Importantly, the composites could be loaded/unloaded in <1 s, featured fully reversible changes in both their visible appearance and surface microstructure, and readily withstood repeated mechanical cycling. Interestingly, the composites demonstrated properties similar to those reported for various squid skin components, including elastic moduli (~0.5–3 MPa for the chromatophore-containing dermal layer)25, response times (<1 s for chromatophore organs)26, and capacities for extreme elongation (>14-fold diameter expansion for chromatophore pigment cells)27. Therefore, the composites exhibit several advantageous characteristics that are desired for thermal switching applications, including a rapid response time, a soft and stretchable form factor, and a straightforward actuation mechanism (Supplementary Table 2).
We next showed that the composites’ infrared reflectance and transmittance could be dynamically modulated on demand by an applied mechanical stimulus (a uniaxial strain). In its relaxed state, a representative composite featured a high average total reflectance of ~100% (Fig. 3e) and a low average total transmittance of ~1%, as well as no apparent signals associated with specific functional groups (Fig. 3f), due to complete coverage of the infrared-transparent polymer matrix by the infrared-reflecting copper coating (Fig. 3b). However, under a strain of 30%, the representative composite featured a reduced average total reflectance of ~77% (Fig. 3e) and an increased average total transmittance of ~16%, as well as signals corresponding to the chemical functionalities of SEBS (e.g., –C=C–, –CH2–, and =C–H) (Fig. 3f), confirming that the underlying polymer matrix was partially uncovered (Fig. 3c)36,37. Under an increased strain of 50%, the representative composite featured an even smaller average total reflectance of ~67% (Fig. 3e) and an even larger average total transmittance of ~25%, as well as increased intensities for the SEBS-associated spectroscopic signals (Fig. 3f), due to additional exposure of the underlying polymer matrix (Fig. 3d). In general, the composites’ reflectance and transmittance both demonstrated a non-linear dependence on the strain, with the reflectance decreasing by ~25 ± 1%, ~35 ± 1%, and ~47 ± 2% at strains of 30%, 50%, and 100%, respectively (Fig. 3g), and the transmittance increasing by ~15 ± 1%, ~24 ± 2%, and ~39 ± 3% at strains of 30%, 50%, and 100%, respectively (Fig. 3h) (all relative to the initial unstretched state). Notably, the composites displayed fully reversible changes in their infrared reflectance and transmittance (Fig. 3e, f) and also exhibited excellent stability, with no degradation in their functionality after >~103 actuation cycles (Supplementary Fig. 3). Moreover, based on their transmittance at strains of 0% and 100%, our mechanically actuated materials possess maximum transmittance on/off ratios of >~25, which exceed the best values reported for radiative thermal switches (Supplementary Table 2). Thus, the composites showcase several additional characteristics desired for thermal switching applications, including reversibility, stability, and high on/off ratios (Supplementary Table 2).
Thermal modeling and evaluation
Having confirmed our composites’ tunable infrared properties, we evaluated their promise for adaptive thermal management within the context of a wearable configuration. To this end, we leveraged our spectroscopic measurements and computationally modeled heat transfer between human skin, the composite material, and the surrounding environment in various states of actuation (for comparison, we performed analogous experiments and calculations for several common types of cloth) (Fig. 4a, Supplementary Note 1, Supplementary Fig. 4, and Supplementary Table 3)38,39. We also determined the environmental setpoint temperatures, i.e., ones at which the body’s skin temperature and outgoing heat flux remain constant, that would ensure individuals maintained their thermal comfort while wearing the unstrained and strained composites (or types of cloth). In their relaxed state, the composites featured a setpoint temperature of ~14.5 °C, which was similar to the value of ~14.3 °C found for the space blanket (Fig. 4b). However, under a moderate strain of 30%, the composites featured a setpoint temperature of ~19.2 °C, which was similar to the value of ~18.9 °C found for a Columbia Omniheat fleece lining (Fig. 4b). In addition, under an increased strain of 50%, the composites featured a setpoint temperature of ~20.9 °C, which was similar to the value of ~20.5 °C found for wool (Fig. 4b). Moreover, under an even greater strain of 100%, the composites featured a setpoint temperature of ~22.7 °C, which was similar to the value of ~22.8 °C found for cotton (Fig. 4b). Taken together, our infrared spectroscopy experiments and subsequent calculations confirmed that the composites could be rapidly actuated with strain to maintain a wearer’s thermal comfort across an environmental setpoint temperature window of ~8.2 °C, which is among the largest dynamic ranges reported for any comparable passive material (Fig. 4b). In essence, the composites possess unprecedented switching capabilities, wherein their infrared reflectance and transmittance can be modulated in real time to emulate various types of cloth (note that common fabrics would typically exhibit small and/or irreversible changes in their infrared properties upon the application of strain). Assuming broad implementation in advanced garments that are widely deployed and adopted, our composites’ significant dynamic temperature setpoint window of >8 °C could enable an estimated reduction in building energy consumption of >30%9,40,41.
We next proceeded to validate our composites’ ability to adaptively manage heat transfer from a surface that emulated the thermal behavior of human skin. To this end, we mounted the composites in a custom-designed holder that allowed for the application of strain on a sweating guarded hot plate and then tested their thermoregulatory functionality under controlled conditions without and with mechanical actuation (Fig. 4c and Supplementary Fig. 5). In its relaxed state, a representative composite maintained the steady state heat flux from the hot plate at an average value of ~248 W m−2 (Fig. 4d). Under a moderate strain of 30%, the same composite maintained the steady state heat flux from the hot plate at a higher average value of ~291 W m−2 (Fig. 4d). Under a further increased strain of 50%, the composite maintained the steady state heat flux from the hot plate at an even higher average value of ~307 W m−2 (Fig. 4d). In general, the heat flux could be stably, reliably, and repeatedly modulated by average values of ~36 ± 8 and ~51 ± 8 W m−2 upon actuation with applied strains of 30% and 50%, respectively (with a maximum change of ~59 W m−2). Excitingly, based on these measurements, the composites can manage up to one quarter of the metabolic heat generation from the human body, which is expected to be ~70 W m−2 for a sedentary individual (and potentially much higher depending on the type of activity)38,42. In addition, the composites need an estimated input of only ~3 W m−2 for one mechanical switching event (at moderate strain) and do not continuously consume power, making their energy requirements substantially lower than all known active thermal management platforms (Supplementary Note 2 and Supplementary Table 1). Consequently, the composites demonstrate the key advantages of both passive and active systems by exhibiting excellent energy efficiency while simultaneously allowing for real-time user control.
Human subject testing
Last, we assessed the composites’ ability to function as the dynamic switchable components in wearable systems and, more specifically, to locally manage the temperature of the human body. For this purpose, we fabricated custom-designed composite-based sleeves, which allowed for mechanical actuation of the joined composites via a straightforward fastener assembly (for comparative purposes, we prepared analogous space blanket-based sleeves) (Fig. 5a and Supplementary Fig. 6). Subsequently, we outfitted a human subject with these sleeves and then recorded the outgoing heat flux and apparent change in temperature for both the sleeve-covered and bare forearms of the wearer, while actuating the composites with different strains (note that the forearms served as internal standards that facilitate comparisons across all measurements) (Fig. 5b–f and Supplementary Fig. 7). In initial benchmark experiments, a static space blanket-based sleeve trapped (primarily reflected back) the heat emitted by the covered forearm (Fig. 5b) and thus raised its temperature by ~1.0 ± 0.1 °C more than the bare forearm of the same person (Fig. 5g and Supplementary Fig. 7). Similarly, without applied strain, the composite-based sleeve trapped the heat emitted by the covered forearm (Fig. 5c) and raised its temperature by ~0.9 ± 0.1 °C more than the same person’s bare forearm (Fig. 5g and Supplementary Fig. 7), much like the space blanket. However, for an applied strain of 30%, the composite-based sleeve trapped only some of the heat emitted by the covered forearm (Fig. 5e) and raised its temperature by only ~0.3 ± 0.1 °C more than the same person’s bare forearm (Fig. 5g and Supplementary Fig. 7), which constituted a >2-fold reduction in the temperature change measured for the space blanket. Furthermore, for an applied strain of 50%, the composite-based sleeve trapped substantially less of the heat emitted from the covered forearm (Fig. 5f) and raised its temperature by only ~0.1 ± 0.1 °C more than the same person’s bare forearm (Fig. 5g and Supplementary Fig. 7), which represented a ~10-fold reduction in the temperature change measured for the space blanket. Overall, the measurements demonstrated that the composite-based sleeves could be adjusted to manage the heat flux from the wearer to the surrounding environment in real time (Fig. 5b–f and Supplementary Movie 1) and to modulate the wearer’s local changes in body temperature by nearly an order of magnitude with excellent control (Fig. 5g). Importantly, the maximum measured temperature changes were ~2–5-fold greater than the reported temperature perception thresholds for a variety of human subjects, allowing users of the composite-based sleeves to readily perceive the thermal effect of the different actuation states43. In principle, the performance of the sleeves and comfort of the wearer could be improved further through the use of composites from comparable infrared-transparent polymer matrices with enhanced breathabilities. Overall, these exciting preliminary findings lay the groundwork for the development of sophisticated composite material-based garments, which can be site-specifically actuated via more advanced strategies and thus allow for regulation of the local thermal environment across a wearer’s entire body.
In summary, we have developed an artificial thermoregulatory platform that leverages the static infrared-reflecting design of the space blanket and draws inspiration from the dynamic color-changing ability of squid skin, and our findings hold significance for several reasons. First, our composites function via a unique but generalizable mechanism that relies on reversible, mechanically actuated changes in surface microstructure and, consequently, can be further optimized through the use of alternative infrared-reflecting metals/oxides, e.g., titanium dioxide, or other elastic infrared-transparent polymers, e.g., polyethylene derivatives. Second, these stimuli-responsive materials alter their reflectance and transmittance within the thermal infrared region of the electromagnetic spectrum and thus can adjust their thermoregulatory properties to resemble those of other common wearable materials, such as the space blanket, an Omniheat fleece lining, wool, and cotton. Third, our composites essentially behave like radiative thermal switches and possess a highly desirable combination of metrics, including ease of manufacturing over large areas, a straightforward actuation method, reversibility and tunability without hysteresis, stability to repeated cycling, a soft and stretchable form factor, a rapid response time, a high on/off ratio, and a low operating temperature (Supplementary Table 2). Fourth, our materials can manage the trapping/release of a significant portion of the thermal flux expected from a resting individual, while requiring only a fraction of this energy for actuation, and thereby serve as an energy-efficient conceptual and technological bridge between passive and active approaches to thermal management. Fifth, our composites possess one of the largest reported dynamic environmental setpoint temperature ranges and can precisely regulate local body temperature changes for wearers in real time, indicating that they may be appropriate for integration into more advanced personal thermal management systems that are electrically or electromechanically actuated. Last, our materials are manufactured from low-cost commercial building blocks via scalable and facile processes, portending favorably for their use in a great variety of applications, ranging from traditional ones, such as clinical warming devices and shipping containers, to emerging ones, such as conformable electronic skin and untethered soft robots. Overall, our bioinspired platform features unprecedented capabilities and figures of merit, which dramatically advance the state of the art in multiple areas, and as such, it holds the potential to shift modern energy consumption paradigms upon widespread implementation.
Fabrication of the composite materials
The composite materials were produced according to standard microfabrication protocols. First, to prepare the nanostructured layer, a ~20-nm planar copper (Kurt J. Lesker) film and a ~90-nm array of tilted columns were sequentially electron beam evaporated onto a 6-inch diameter silicon wafer (University Wafer) by using an Angstrom Engineering EvoVac system. Next, to embed the nanostructured layer within an infrared-transparent elastomer, a ~30-μm-thick film from a commercially available SEBS block copolymer (G1645 SEBS, Kraton Polymers LLC) was spincast directly onto the nanostructure-modified substrate. Last, the composite was heat-treated on a hot plate at 60 °C for 10 min and then delaminated from the substrate by means of a Mylar frame and pressure-sensitive tape. The resulting materials obtained via this procedure were used for physical, mechanical, optical, and infrared characterization experiments as needed.
SEM of the composite materials
The morphology of the composite materials was characterized via SEM by using a Magellan 400 XHR SEM (FEI). For imaging of the nanostructured layer, the pristine samples were not modified. For cross-sectional imaging of the interior of the composite materials, a portion of the elastomer was removed with a Hitachi IM4000 Plus Ion Milling System. For imaging of the copper domains at various strains, the samples were subjected to the appropriate strain, fixed with an epoxy resin (Ted Pella), and sputter coated with an ~2-nm film of platinum/palladium on a Leica ACE200 Vacuum Coater. Such characterization ensured quality control and standardization during the fabrication and testing steps.
Elemental mapping of the composite materials
The chemical composition of the materials’ surfaces was characterized via EDS by using a Magellan 400 XHR SEM outfitted with an Oxford Instruments X-Max Silicon Drift Detector. For these measurements, the samples were again subjected to various strains, fixed with an epoxy resin, and sputter coated with an ~2-nm film of platinum/palladium. The resulting copper elemental maps were analyzed by using the ImageJ (NIH) software package and were consistent with expectations from the SEM experiments. Such characterization further confirmed the chemical identity of the copper domains covering the surface of the elastomer.
Infrared spectroscopy of the composite materials and cloths
The infrared properties of the composite materials and various types of cloth were characterized according to established protocols44 via infrared spectroscopy by using a Perkin Elmer Fourier transform infrared (FTIR) Spectrometer outfitted with a Pike Technologies Mid-infrared Integrating Sphere. The measurements furnished the total (sum of diffuse and specular) reflectance and transmittance and were referenced to a Pike Technologies Diffuse Gold Standard, unless otherwise specified. During the experiments, all samples were mounted on home-built size-adjustable stages, which allowed for mechanical actuation, i.e., the application of different uniaxial strains, as necessary. The samples tested included rayon, cotton, linen, silk, polyester, cotton flannel, acrylic, wool, the Columbia Omniheat fleece, the space blanket, and the composite material, and the tested areas were large enough to completely cover the ~2 cm diameter instrument port before and after mechanical actuation. The total transmittance spectra were collected at a normal illumination angle, and the total reflectance spectra were collected at an illumination angle of 12°. The collected spectra were analyzed with the Spectrum (PerkinElmer) and Igor Pro (Wavemetrics) software packages, and all average values were calculated over the wavelength range of 4.5–16.5 μm. The experiments were performed for at least ten different samples, with similar results obtained in each instance.
Tensile testing of the composite materials
The tensile properties of the composite materials were characterized according to standard protocols45 by using an Instron 3365 Universal Testing System. During the experiments, samples with a 3-inch length, 0.5-inch width, and 30 μm thickness were mounted on the grips of the instrument at an initial separation of 1 inch. The measurements furnished the load vs. the elongation, enabling calculation of the engineering stress as a function of the engineering strain. The engineering stress (σ) was calculated according to the equation:
where F is the applied load and A is the area of the sample. The engineering strain (ε) was calculated according to the equation:
where ΔL is the change in length of the sample and L is the initial length of the sample. The Young’s modulus (E) was calculated from the linear region of the engineering stress vs. the engineering strain (at low strain) by using the following equation:
where E is the slope of the elastic (linear) region. The experiments were performed for at least ten different samples, with similar results obtained in each instance.
Stability testing of the composite materials
The mechanical stability of the composite materials was characterized by using a MARK-10 ESM303 Tension/Compression Test Stand, in conjunction with a Perkin Elmer FTIR Spectrometer outfitted with a Pike Technologies Mid-Infrared Integrating Sphere. First, the samples’ total infrared reflectance and transmittance were measured at uniaxial strains of 0%, 30%, and 50%, as described above. Next, the samples were cycled 1000 times between applied strains of 0% and 50%. In turn, the samples’ total infrared reflectance and transmittance were again measured at uniaxial strains of 0%, 30%, and 50%, as described above. The experiments were performed for at least four different samples, with similar results obtained in each instance.
Thermal evaluation of the composite materials
The thermal properties of the composite materials were characterized according to standard protocols46 by using a Thermetrics SGHP-8.2 Sweating Guarded Hot Plate located within a temperature- and humidity-controlled chamber (Supplementary Fig. 5). During the experiments, all samples were mounted on custom-designed holders, which allowed for them to be maintained under different applied uniaxial strains on the hot plate. The measurements furnished the thermal flux from the hot plate necessary to maintain its temperature at a constant value, as well as the thermal resistance of the sample being tested. For the measurements, the hot plate was covered with skin tape (Trimaco) and kept at a human skin-like temperature of 35 °C; the surrounding chamber was maintained at an environmental temperature of 19.5 °C and a relative humidity of 50%; and the sample was maintained under a laminar air flow of 1 m s−1. The average values of the thermal flux were calculated from multiple independent measurements performed over a period of 30 min for both strained and unstrained samples. The collected data were analyzed with the Igor Pro (Wavemetrics) software package. The experiments were performed for at least three different samples, with similar results obtained in each instance.
Fabrication of the wearable sleeves
The integrated sleeves, which consisted of a composite-based adaptive component and a fabric-based actuation component, were designed and manufactured via protocols developed in-house (Supplementary Fig. 6). To prepare the composite-based adaptive component, four circular samples of the composites with an ~6-inch diameter were first segmented into rectangular pieces with an ~5.5-inch length and an ~2.5-inch width. The four rectangular pieces were then joined together with adhesive tape to form a larger section with an ~10-inch length and an ~5.5-inch width. The larger section was in turn modified with hook fasteners (from a commercial hook-and-loop fastener set) along its periphery, in order to enable integration with the fabric-based component and allow for the application of different strains. To prepare the fabric-based actuation component, a square sample of a stretch woven fabric was first cut into a sleeve-like pattern. The resulting fabric swatch was then modified with loop fasteners (from the same commercial hook-and-loop fastener set) at predetermined positions, which were selected to correspond to the application of strains of 0%, 10%, 30%, and 50% to the composite-based component. The fabric swatch was in turn modified with support bands, which encircled the forearm to provide structural support and simultaneously functioned as rail guides to prevent the composite-based component from directly contacting the skin. To complete the wearable adaptive thermal management sleeve, the fabric-based actuation component was mounted on the forearm of a human subject, and the composite-based adaptive component was then attached to its fabric-based counterpart via the complementary hook-and-loop fastener assembly. Here note that the space blanket-based sleeves were prepared by following nearly identical protocols to those described above. All variants of the sleeves were used for thermal management experiments with human subjects immediately after fabrication.
Human subject testing of the wearable sleeves
The thermoregulatory properties of the composite-based sleeves were evaluated for human subjects by using a FLIR C2 Infrared Camera. First, the bare forearms of a human subject were allowed to equilibrate in a controlled environment, and both forearms were imaged to record their average initial temperature. Next, the composite-based sleeve was mounted on one of the forearms, with the adaptive composite-based component attached at a loop fastener position corresponding to the absence of strain, and both the bare and sleeve-covered forearms were allowed to equilibrate for a period of 10 min. In turn, the composite-based sleeve was removed from the previously covered forearm, and both forearms were imaged again to record their final average temperature. Last, the same sequence of measurements was repeated with the adaptive composite-based component attached at a loop fastener position corresponding to different applied strains of ~10%, ~30%, and ~50%. Note that the sleeve removal and measurement steps were performed sufficiently rapidly to minimize effects from cooling of the skin of the bare forearm, which cools slowly in air from ~33 °C to ~28 °C over a span of 120 min47. From these measurements, the relative change in temperature (ΔT) for the human subject’s sleeve-covered forearm with respect to his/her bare forearm, which served as a de facto internal standard, was calculated according to the equation:
where ΔTcovered is the average temperature change for the covered forearm, ΔTbare is the average temperature change for the bare forearm, Tcovered,final is the average final temperature for the covered forearm, Tcovered,initial is the average initial temperature for the covered forearm, Tbare,final is the average final temperature for the bare forearm, and Tbare,initial is the average initial temperature for the bare forearm. For the presented measurements, the human subject was a sedentary 24-year-old male for whom overall perspiration remained relatively unchanged during the course of any specific experiment, and the surrounding room temperature was maintained at ~17.5–18.5 °C. The average forearm temperatures were calculated directly from the obtained videos and images by using the FLIR Tools+ (FLIR) and ImageJ (NIH) software packages. The calculation of the average temperature from the infrared camera images over the entire forearm mitigated the influence of unexpected temperature fluctuations and hot and cold spots on our analysis48, with complementary thermal couple measurements providing additional confirmation and validation for the observed trends. Here the thermoregulatory properties of the space blanket-based sleeves were evaluated by following nearly identical protocols to those described above. All variants of the experiments were performed for at least seven different sleeves, with similar results obtained in each instance.
Human subjects' research
Informed consent was obtained from the human subjects who participated in the research. The human subject testing protocol was reviewed and approved by the UC Irvine Institutional Review Board (IRB).
All data needed to evaluate the conclusions in the paper are present in the paper and/or the supplementary materials.
Moore, A. L. & Shi, L. Emerging challenges and materials for thermal management of electronics. Mater. Today 17, 163–174 (2014).
Ahlers, M. F. Aircraft Thermal Management (John Wiley & Sons, New York, 2011).
John, M., Ford, J. & Harper, M. Peri-operative warming devices: performance and clinical application. Anaesthesia 69, 623–638 (2014).
Kikuchi, Y., Kanematsu, Y., Sato, R. & Nakagaki, T. Distributed cogeneration of power and heat within an energy management strategy for mitigating fossil fuel consumption. J. Ind. Ecol. 20, 289–303 (2016).
Singh, S. P., Burgess, G. & Singh, J. Performance comparison of thermal insulated packaging boxes, bags and refrigerants for single-parcel shipments. Packag. Technol. Sci. 21, 25–35 (2008).
Stoppa, M. & Chiolerio, A. Wearable electronics and smart textiles: a critical review. Sensors 14, 11957–11992 (2014).
Ürge-Vorsatz, D., Cabeza, L. F., Serrano, S., Barreneche, C. & Petrichenko, K. Heating and cooling energy trends and drivers in buildings. Renew. Sustain. Energy Rev. 41, 85–98 (2015).
International Energy Agency. Energy Technology Perspectives 2017 (OECD/International Energy Agency, Paris, 2017).
U.S. Department of Energy Advanced Research Projects Agency. DELTA Program Overview (ARPA-E, U.S. Department of Energy, Washington, DC, 2014).
Kakaç, S., Vasiliev, L. L., Bayazitoglu, Y. & Yener, Y. (eds.) Microscale Heat Transfer - Fundamentals and Applications (Springer, New York, 2005).
Tong, X. C. Advanced Materials for Thermal Management of Electronic Packaging (Springer, New York, 2011).
Gupta, N. & Tiwari, G. N. Review of passive heating/cooling systems of buildings. Energy Sci. Eng. 4, 305–333 (2016).
Wang, Y., Shukla, A. & Liu, S. A state of art review on methodologies for heat transfer and energy flow characteristics of the active building envelopes. Renew. Sustain. Energy Rev. 78, 1102–1116 (2017).
NASA. Reflecting on space benefits: a shining example. Spinoff 2006, 56–61 (2006).
Meyer, R. X. Elements of Space Technology (Elsevier, London, 1999).
Skrabec, Q. R. Aluminum in America: A History (Mcfarland & Company, Inc., Jefferson, 2017).
Watkins, S. M. & Dunne, L. E. Functional Clothing Design: From Sportswear to Spacesuits (Fairchild Books, New York, 2015).
Li, N. et al. Phononics: manipulating heat flow with electronic analogs and beyond. Rev. Mod. Phys. 84, 1045–1066 (2012).
Wehmeyer, G., Yabuki, T., Monachon, C., Wu, J. & Dames, C. Thermal diodes, regulators, and switches: physical mechanisms and potential applications. Appl. Phys. Rev. 4, 041304 (2017).
DiPirro, M. J. & Shirron, P. J. Heat switches for ADRs. Cryogenics 62, 172–176 (2014).
Mäthger, L. M., Denton, E. J., Marshall, N. J. & Hanlon, R. T. Mechanisms and behavioural functions of structural coloration in cephalopods. J. R. Soc. Interface 6, S149–S163 (2009).
Kreit, E. et al. Biological versus electronic adaptive coloration: how can one inform the other? J. R. Soc. Interface 10, 1–13 (2012).
Phan, L. et al. Dynamic materials inspired by cephalopods. Chem. Mater. 28, 6804–6816 (2016).
Messenger, J. B. Cephalopod chromatophores: neurobiology and natural history. Biol. Rev. Camb. Philos. Soc. 76, 473–528 (2001).
Kirkwood, K. M., Bell, G., Kuzirian, A. M., Hanlon, R. T. & Wetzel, E. D. Mechanics of the cephalopod chromatophore layer: structural characterization of cephalopod chromatophores. In ASME 2011 Summer Bioengineering Conference 427–428 (ASME, New York, NY, 2011).
Suzuki, M., Kimura, T., Ogawa, H., Hotta, K. & Oka, K. Chromatophore activity during natural pattern expression by the squid Sepioteuthis lessoniana: contributions of miniature oscillation. PLoS ONE 6, e18244 (2011).
Bell, G. R. R. et al. Chromatophore radial muscle fibers anchor in flexible squid skin. Invertebr. Biol. 132, 120–132 (2013).
Rossiter, J., Yap, B. & Conn, A. Biomimetic chromatophores for camouflage and soft active surfaces. Bioinspir. Biomim. 7, 036009 (2012).
Yu, C. et al. Adaptive optoelectronic camouflage systems with designs inspired by cephalopod skins. Proc. Natl. Acad. Sci. USA 111, 12998–13003 (2014).
Wang, Q., Gossweiler, G. R., Craig, S. L. & Zhao, X. Cephalopod-inspired design of electro-mechano-chemically responsive elastomers for on-demand fluorescent patterning. Nat. Commun. 5, 4899 (2014).
Larson, C. et al. Highly stretchable electroluminescent skin for optical signaling and tactile sensing. Science 351, 1071–1074 (2016).
Xu, C., Stiubianu, G. T. & Gorodetsky, A. A. Adaptive infrared-reflecting systems inspired by cephalopods. Science 359, 1495–1500 (2018).
Barranco, A., Borras, A., Gonzalez-Elipe, A. R. & Palmero, A. Perspectives on oblique angle deposition of thin films: from fundamentals to devices. Prog. Mater. Sci. 76, 59–153 (2016).
Drobny, J. G. Handbook of Thermoplastic Elastomers 2nd end (Elsevier, Oxford, 2014).
Mark, J. E. Polymer Data Handbook 2nd edn (Oxford University Press, Oxford, 2009).
Munteanu, S. B. & Vasile, C. Spectral and thermal characterization of styrene-butadiene copolymers with different architectures. J. Optoelectron. Adv. Mater. 7, 3135–3148 (2005).
Allen, N. S. et al. Degradation and stabilisation of styrene–ethylene–butadiene–styrene (SEBS) block copolymer. Polym. Degrad. Stab. 71, 113–122 (2001).
Cai, L. et al. Warming up human body by nanoporous metallized polyethylene textile. Nat. Commun. 8, 496 (2017).
Tong, J. K. et al. Infrared-transparent visible-opaque fabrics for wearable personal thermal management. ACS Photonics 2, 769–778 (2015).
Hoyt, T., Lee, K. H., Zhang, H., Arens, E. & Webster, T. Energy savings from extended air temperature setpoints and reductions in room air mixing. In International Conference on Environmental Ergonomics 2009 608–612 (Curran Associates, Inc., Red Hook, NY, 2011).
Saurav, K., Jain, M. & Bandhyopahyay, S. Reducing energy consumption for space heating by changing zone temperature: pilot trial in Luleå, Sweden. In Proceedings of the Ninth International Conference on Future Energy Systems 266–270 (Karlsruhe, Germany, 2018).
Bruning, S. F., et al. Thermal Environmental Conditions for Human Occupancy. Addendum g to ANSI/ASHRAE Standard 55-2010 (ASHRAE, Atlanta, 2013).
Stevens, J. C. & Choo, K. K. Temperature sensitivity of the body surface over the life span. Somatosens. Mot. Res. 15, 13–28 (1998).
Hanssen, L. M., Kaplan, S. G. & Datla, R. V. Infrared Optical Properties of Materials. NIST Spec. Publ. 250-94 (NIST, Gaithersburg, MD, 2015).
ASTM. Standard D882: Standard Test Method for Tensile Properties of Thin Plastic Sheeting (ASTM Int., West Conshohocken, 2012).
ASTM. Standard F1868: Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate (ASTM Int., West Conshohocken, 2017).
Barcroft, H. & Edholm, O. G. Temperature and blood flow in the human forearm. J. Physiol. 104, 366–376 (1946).
Parsons, K. Human Thermal Environments (Taylor & Francis, New York, 2003).
The authors are grateful to the Advanced Research Projects Agency–Energy (cooperative agreement DE-AR0000534) and the Air Force Office of Scientific Research (grant FA2386-14-1-3026) for their financial support. M.C.E. also acknowledges the National Institute of Standards and Technology and the National Physical Sciences Consortium for their financial support. The authors thank Kraton Polymers, LLC for their support and assistance by providing samples of SEBS polymers for use in the project. The authors thank the UC Irvine Materials Research Institute (IMRI) for its support and for the use of the materials characterization facilities. The authors thank Dr. Albert F. Bennett for his invaluable technical advice and assistance.
E.M.L., S.R.J., M.F., E.M.K., K.L.N., P.P., G.T.S., and A.A.G. are listed as inventors on a provisional U.S. patent application from the University of California, Irvine, which describes the design and working principles of the reported adaptive thermoregulatory materials and systems. The remaining authors declare no competing interests.
Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Leung, E.M., Colorado Escobar, M., Stiubianu, G.T. et al. A dynamic thermoregulatory material inspired by squid skin. Nat Commun 10, 1947 (2019). https://doi.org/10.1038/s41467-019-09589-w
This article is cited by
Recent Progress of Bio-inspired Camouflage Materials: From Visible to Infrared Range
Chemical Research in Chinese Universities (2023)
Color-preserving passive radiative cooling for an actively temperature-regulated enclosure
Light: Science & Applications (2022)
Scalable manufacturing of sustainable packaging materials with tunable thermoregulability
Nature Sustainability (2022)
Bioinspired Materials: From Distinct Dimensional Architecture to Thermal Regulation Properties
Journal of Bionic Engineering (2022)
Nature-inspired materials: Emerging trends and prospects
NPG Asia Materials (2021)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.