Fully characterising the exchange of volatile elements between the Earth’s interior and surface layers has been a longstanding challenge. Volatiles scavenged from seawater by hydrothermally altered oceanic crust have been transferred to the upper mantle during subduction of the oceanic crust, but whether these volatiles are carried deeper into the lower mantle is poorly understood. Here we present evidence of the deep-mantle Cl cycle recorded in melt inclusions in olivine crystals in ocean island basalts sourced from the lower mantle. We show that Cl-rich melt inclusions are associated with radiogenic Pb isotopes, indicating ancient subducted oceanic crust in basalt sources, together with lithophile elements characteristic of melts from a carbonated source. These signatures collectively indicate that seawater-altered and carbonated oceanic crust conveyed surface Cl downward to the lower mantle, forming a Cl-rich reservoir that accounts for 13–26% or an even greater proportion of the total Cl in the mantle.
Volatile element distribution in the Earth was influenced by the dynamics and chemical differentiation that operated during the course of the planet’s evolution. Drastic outgassing of the mantle during early Earth history formed a proto-hydrosphere, and this was succeeded by continual volatile outflux from the mantle through volcanism at mid-ocean ridges, ocean islands and subduction zones1,2. A return of volatiles from the hydrosphere to the mantle occurs in the scheme of plate tectonics. Subseafloor oceanic crust scavenges volatiles from seawater during hydrothermal reactions prior to subduction3,4,5. Although a greater proportion of volatiles are liberated from subducted oceanic crust beneath fore-arc and sub-arc regions3,4,5,6,7,8, recent studies of subduction-zone metamorphic rocks suggest that some volatiles remain and descend to the mantle3,4. This theory is supported by the discovery of diamond inclusions containing volatile-rich fluids from subcontinental mantle9,10 and water-bearing ringwoodite from the mantle transition zone11. However, whether volatiles are carried deeper into the lower mantle remains an open question.
Chlorine is suitable for tracing seawater-derived volatiles carried by subducted materials1,2,4,12,13,14,15. A mantle domain impregnated with seawater-derived volatiles is expected to be enriched in Cl. The volatile composition of the upper mantle has been estimated from studies of mid-ocean ridge basalts (MORB)15,16,17. Enriched MORB mantle sources have higher Cl concentrations (~22 p.p.m.) than normal and depleted MORB mantle sources (5 and 0.4 p.p.m., respectively)15. This range of values is thought to reflect heterogeneous Cl distribution in the upper mantle caused by recycling of subducted oceanic crust. In contrast, transfer of Cl-bearing subducted oceanic crust to the lower mantle is poorly constrained because of limited studies on volatiles from ocean island basalts (OIBs) relevant to mantle plumes sourced from the lower mantle12,13,18,19. Moreover, magmas erupting in ocean settings are susceptible to Cl contamination by assimilating seawater, brine and brine-impregnated crust, which obscures the Cl geochemical signature originating from the mantle in both concentration and stable isotope composition12,15,16,18,19,20.
A reliable estimate of the Cl content from a mantle source can be obtained through geochemical analysis of olivine-hosted melt inclusions, tiny melt droplets encapsulated in olivine phenocrysts. Volatiles in these melt inclusions are thought to be less modified by secondary assimilation and degassing due to early-stage crystallisation of olivine in the magma. We report Cl and lithophile element compositions combined with Pb isotopes of rehomogenised melt inclusions in OIBs from Raivavae along with existing data from Mangaia18 in the Austral–Cook Islands, South Pacific. The Raivavae and Mangaia host basalts are characterised by radiogenic Pb isotopic compositions, referred to as high-μ (HIMU), where μ = 238U/204Pb. This radiogenic Pb signature is believed to have been caused by subtraction of mobile elements, such as Pb, K and Rb, from oceanic crust, while retaining U and Th, during subduction and subsequent radiogenic ingrowth for a few billion years6,21. Because seismic tomography demonstrates that the mantle plume relevant to the Austral–Cook Islands chain is sourced from the layer with thermochemical anomaly above the core–mantle boundary22,23, the subducted oceanic crust stored in the lowermost mantle would be the source of the HIMU basalts at Raivavae and Mangaia24. Consequently, whether Cl is delivered to the lower mantle by subducted oceanic crust can be assessed by studying melt inclusions in basalts at these islands.
In this study, we show that Cl enrichment in melt inclusions is associated with radiogenic Pb isotopes, which are indices of subduction-modified ancient oceanic crust in basalt sources. Melt inclusions with radiogenic Pb isotopes also display lithophile element signatures of melts from a carbonated mantle source. These facts indicate the deep-mantle Cl cycle in which seawater-derived Cl was transferred by subducted altered and carbonated oceanic crust, stored in the lower mantle for billions of years, and returned to the surface through mantle upwelling and partial melting. The Cl enrichment in melt inclusions enables estimation of total Cl amounts subtracted from seawater by subducted oceanic crust, which is equivalent to or even greater than that in the MORB mantle source. We suggest that deep Cl sequestration such as this has played a considerable role in moderating salinity level in the hydrosphere.
Pb isotopic compositions
The Raivavae host basalts have a bimodal Pb isotopic composition25 (Fig. 1a). The older Rairua Formation basalts have more radiogenic Pb (ie, lower 207Pb/206Pb and 208Pb/206Pb), than the younger Anatonu Formation basalts. The Rairua basalts thus contain a larger component from recycled ancient oceanic crust with the HIMU signature than do the Anatonu basalts, which have an isotopic proximity to the MORB mantle source. In situ Pb isotope analyses of melt inclusions indicate that although the Pb isotopic compositions of most of the inclusions overlap the host basalt compositions, some show Pb isotopes intermediate between the Rairua and Anatonu host basalts. Moreover, one Anatonu inclusion notably appears in the Pb isotopic range defined by the Rairua host basalts and vice versa. This suggests localised chemical heterogeneity in the magmas, which is likely caused by mingling of melts from different mantle sources with various Pb isotope compositions. Similar or even greater Pb isotopic variation has been reported in melt inclusions in Mangaia basalts by some authors26,27,28, while other authors18,29 did not find such large variation (Supplementary Fig. 1).
We determined Cl enrichment by comparing the lithophile elements K and Nb with Cl, which have similar incompatibility during partial melting (Fig. 1b, c)1,12,15. After filtering out melt inclusions with anomalously high Cl or unusual lithophile element compositions (5 out of 50; see Supplementary Fig. 2 and Supplementary Note 1), we discovered that the Rairua inclusions have higher Cl/K and Cl/Nb ratios than the Anatonu inclusions and normal MORBs with Cl/K ~0.02 and Cl/Nb ~515, and that these ratios are negatively correlated with 207Pb/206Pb among the Rairua inclusions. Because shallow contaminants, such as seawater, brine, altered oceanic crust and sediments have 207Pb/206Pb similar to or higher than that of the Anatonu inclusions, their assimilation cannot account for Cl enrichment in the Rairua inclusions having radiogenic Pb isotopes (lower 207Pb/206Pb). The Mangaia melt inclusions also show high and varied Cl/K and Cl/Nb compared to the Anatonu inclusions and normal MORBs18. Chlorine enrichment should thus be a feature of the HIMU mantle source.
Lithophile element compositions also change systematically with Pb isotopes. The Rairua inclusions with the most radiogenic Pb isotopes show prominent depletion in K relative to U, which is ascribed to a preferential loss of K from subducted oceanic crust6,30 (Fig. 2a). These inclusions also have the lowest SiO2 and highest CaO and CaO/Al2O3 (Supplementary Fig. 3). They plot outside the field defined by experimental partial melt from carbonate-free peridotite in SiO2–CaO/Al2O3 space (Fig. 3). Partial melting of carbonate-free silica-deficient eclogite or pyroxenite results in low-SiO2 compositions, as is characteristic of some OIBs, but these partial melts have lower CaO/Al2O3 than the low-SiO2 OIBs31. Therefore, melts from carbonated peridotite and silica-deficient eclogite have been proposed instead as the source of low-SiO2 OIBs32,33,34. This is consistent with the previous discovery of secondary minerals that formed in equilibrium with carbonate-rich melts in peridotite xenoliths from the neighbouring island of Tubuai35. Partial melting of carbonated sources also may have induced the elevated Nd/Hf observed in radiogenic Pb inclusions from the Rairua basalts (Fig. 2b) because of lower partitioning of Hf compared to Nd in carbonated melts36.
Combined Cl, lithophile elements and Pb isotope data indicate that Cl enrichment in the HIMU mantle source originated from seawater-altered and carbonated oceanic crust that was subducted a few billion years ago. During mantle plume upwelling, this subducted crust was embedded in or reacted with a depleted mantle source, generating a series of melts along binary mixing trends defined by the Rairua and Anatonu inclusions (Figs. 1 and 2). The Rairua and Mangaia melt inclusions have similar Cl and lithophile element compositions, but the Mangaia inclusions have more radiogenic Pb isotopes, possibly reflecting differences in recycling age or extent of (U + Th)/Pb differentiation in the subducted oceanic crust.
We evaluated the efficiency of Cl transfer by subducted oceanic crust by using Cl/Nb ≥ 15 in the HIMU mantle source (Fig. 1c). Here, Cl/Nb was employed as an index of Cl enrichment relative to lithophile elements instead of the more commonly used Cl/K because K is selectively lost from oceanic crust, whereas Nb is one of the conservative elements during subduction. A typical Nb concentration in oceanic crust both before and after sub-arc processes is 2–4 p.p.m.6,7,8. Chlorine is predominantly hosted in altered part of the oceanic crust, which is rich in Cl-bearing minerals, such as amphibole and apatite, and saline fluid inclusions in nominally anhydrous minerals2,37,38,39,40. The average Cl concentration in the 7 km section of oceanic crust is estimated to be 78–334 p.p.m.2,37,38. Assuming the initial composition of bulk oceanic crust to be 207 p.p.m. Cl and 3.5 p.p.m. Nb (Cl/Nb ~60; Supplementary Table 3)7,38, the predicted composition of mixed melts from the recycled oceanic crust and MORB source mantle would have Cl/Nb that is too high for the Rairua and Mangaia inclusions (Fig. 1c). Subducted altered oceanic crust could have lost Cl as a consequence of breakdown of Cl-bearing minerals and fluid inclusions during prograde metamorphism under high pressure–temperature conditions in the subducted slab3,39,40,41. This should result in decreasing Cl/Nb in the dehydrated oceanic crust. Despite significant uncertainty, Cl/Nb in dehydrated oceanic crust can be estimated as 7–40, using Cl concentrations reported in ophiolitic eclogites that experienced subduction modification at Syros (28–60 p.p.m.)42 and Monviso (71–79 p.p.m.)41. This overlaps with the Cl/Nb of subducted oceanic crust that formed the HIMU mantle source, implying that the nominal Cl remaining after subduction modification or resupplied by fluid flux from underlying serpentinised lithospheric mantle1,4,14 could have been conveyed along with the residual oceanic crust to the lower mantle (Fig. 4).
Chlorine-bearing phases so far have not been identified in subducted oceanic crust beyond sub-arc depth. Major minerals in eclogites may be capable of accommodating Cl at lattice defects, although this mechanism seems less efficient because of large ionic radius and anionic character of Cl43,44,45. Alternatively, mineral grain boundaries have been suggested as significant storage sites for elements that are incompatible with major minerals46. These incompatible elements including Cl in subducted oceanic crust could be delivered directly to the deep mantle if the slab geotherm is cold. However, recently it was suggested that warm slab geotherms may encounter the solidus of carbonated eclogites in the mantle transition zone (Fig. 4)47. According to this alternative explanation, the incompatible element signatures are transferred by carbonatitic melts from the oceanic crust to the overlying metasomatised mantle that is eventually foundered to form the deep HIMU mantle source48.
Subducted oceanic crust rich in Cl would influence the Earth’s Cl budget. Using Nb concentrations (2–4 p.p.m.) and Cl/Nb (≥15), we estimated the minimum range for Cl concentration of the subducted oceanic crust to be 30–60 p.p.m. It is greater than that of the depleted and normal MORB mantle sources (0.4 and 5 p.p.m., respectively)15, which together comprise more than half of the silicate mantle1,49. Given a constant oceanic crust subduction rate of 5.2 × 1013 kg yr−1 for 4 Ga30, the amount of subducted Cl should be at least 0.6–1.2 × 1019 kg, which is equivalent to or even greater than that in the MORB mantle source (0.11–1.4 × 1019 kg; Fig. 4; Supplementary Table 4). The previous estimates of Cl abundance in the whole mantle show a large uncertainty ranging from 0.15 × 1019 kg to 14 × 1019 kg50. If the recent estimate of bulk Earth Cl concentration of 26 p.p.m. is accepted1, Cl abundance in the mantle after subtracting Cl presently in surface reservoirs (5.8 × 1019 kg; Supplementary Table 4) should be 4.6 × 1019 kg. Consequently, subducted oceanic crust may account for at least 13–26% of the total Cl in the mantle. Although a portion of subducted oceanic crust would be dispersed into the upper mantle and mantle transition zone, giving rise to the enriched MORB mantle and subcontinental mantle sources, the remaining portion could have been isolated in the deep mantle, thus forming the Cl-rich HIMU mantle source.
The deep Cl cycle, which is driven by slab subduction, may moderate salinity conditions in the Earth’s surface layers. Assuming a constant Cl flux rate of 2–5 × 109 kg year−1 (ref. 1), the volcanic output from MORB and OIB to surface reservoirs is estimated to be 0.8–2 × 1019 kg Cl over 4 Ga. However, a salinity change model suggests that seawater in the Archaean and Proterozoic was 1.5–2 times more saline than it is today based on the estimate of on-land evaporites (1.4 × 1019 kg Cl) and brine deposits (1.5 × 1019 kg Cl)50 sequestered from the ocean as the continents grew51. The amount of Cl ever subducted to the deep mantle is comparable to that in the evaporites and brines, which implies that the subducted oceanic crust has been a major Cl sink that compensated for mantle outflux and buffered Cl in the hydrosphere to achieve a low-salinity surface environment suitable for life51.
The rock samples from Raivavae are alkali basalts bearing large (1–3 mm) phenocrysts of olivine ± clinopyroxene. We separated olivine phenocrysts from seven Rairua basalts and eight Anatonu basalts from Raivavae. Fresh olivine grains containing melt inclusions were handpicked under a binocular microscope. Forsterite numbers for the host olivine range from 77 to 86. In many cases, the melt inclusions have spheroidal shapes and the typical sizes of the studied inclusions are 50–150 μm on the longest axis (Supplementary Table 1; Supplementary Figs. 4 and 5). The melt inclusions, which are at least partly devitrified, consist of glass, silicates (clinopyroxene, hornblende and olivine crystallised on inclusion rims), oxides (Fe–Ti oxide and spinel), sulphides and vapour bubbles19. We rehomogenised the inclusions by reheating and quenching them using a heating stage (Linkam; TS1500). Prior to conducting our heating experiments, individual olivine grains were mounted on acryl resin and doubly polished without exposing inclusions on the polished surface. After removing the resin using acetone, the olivine grains were heated under an Ar atmosphere and monitored under a microscope until the inclusions were completely molten. After maintaining homogenisation temperatures (typically 1180–1280 °C) for 5 min, the samples were quickly quenched by pulling the sample plate from the heating furnace. After reheating, rehomogenised melt inclusions were glassy and light brown in colour (Supplementary Figs. 4 and 5). We discarded melt inclusions that burst or became crosscut by cracks during heating. The olivine grains were mounted on acryl resin again and polished to expose rehomogenised glassy melt inclusions on the surface. After removing the resin using acetone, the grains were mounted on indium discs and soaked in acetone and milli-Q water to clean the sample surface.
We determined the compositions of Cl, major and trace elements and Pb isotopes in melt inclusions by a combination of in situ analytical methods using secondary ion mass spectrometry (SIMS), electron probe micro analysis (EPMA) and laser ablation-inductively coupled plasma-MS (LA-ICP-MS). The measured elemental and isotopic compositions are shown in Supplementary Table 1.
The indium discs were coated with gold and the Cl concentrations were determined using SIMS (CAMECA; IMS 1280HR) at the Kochi Institute for Core Sample Research, the Japan Agency for Marine-Earth Science and Technology (JAMSTEC)52,53. A 20 kV (10 kV at the ion source and −10 kV at the sample surface) primary Cs+ ion beam of 300–700 pA was defocused to a 15 μm diameter spot on the sample surface. Presputtering was conducted for 20 s to remove potential surface contaminants before making measurements. Secondary ions from an area of 5 × 5 μm at the centre of the spot were transferred to the ion optics using a field aperture. After separating the ions using a mass resolving power of ~6000, secondary ions were measured with an axial electron multiplier using a magnetic peak switching. The 35Cl beam intensity was measured and normalised with 30Si to determine Cl concentrations. Calibration lines for Cl were determined prior to the sample runs using international and in-house glass standards (Supplementary Fig. 6). In our previous assessment on the reproducibility, the relative standard deviation of Cl measurements was <3% determined by repeated measurements of various standard glasses (97–2517 p.p.m. Cl) as unknown samples53. The analytical uncertainty for Cl is approximated by this value, as it is much higher than in-run precision (Supplementary Table 1). The accuracy of the reported data, which depends on the uncertainty of Cl concentrations of the glass standards used for calibration lines, was estimated to be<6% (1 σ) during the determination of Cl concentrations of the glass standards by bulk analysis using pyrohydrolysis and ion chromatography (Supplementary Table 2)53,54.
After SIMS analyses, the indium discs were polished to remove their gold coatings. After rinsing with acetone and Milli-Q water, the indium discs were dried in a vacuum chamber and coated with carbon for major element analyses using EPMA (JEOL; JXA-8500F) at the Yokosuka Headquarters, JAMSTEC. Major element compositions were determined with a 15 kV accelerating voltage and a 12 nA beam current. The host olivines enclosing the melt inclusions were also analysed using a 20 kV accelerating voltage and a 25 nA beam current.
Trace element compositions of melt inclusions were determined using LA-ICP-MS at the Yokosuka Headquarters, JAMSTEC55. A 200 nm femtosecond laser (OK Laboratory; OK-Fs2000K) coupled with a sector-field ICP-MS (Thermo Fisher Scientific; Element XR) was used for the measurements. The ablation pit was set to a diameter of 20–30 μm and a depth of 20 μm. Surface contamination is typically negligible after careful surface cleaning, as described above. Visible signals from surface contamination, if any, were discarded using time-resolving analysis. For normalisation, a GSD-1G basalt standard glass from the United States Geological Survey (USGS) was measured after every five unknown samples. For quality control, a BHVO-2G international glass standard from the USGS was repeatedly measured (Supplementary Table 2). Standard glass reference values are from the GeoReM database56.
Finally, Pb isotope ratios were determined using the same 200 nm femtosecond laser coupled with a multiple collector-ICP-MS (Thermo Fisher Scientific; Neptune)57,58. The ablation pit was set to a diameter of 30 μm and a depth of 20 μm. To eliminate Pb surface contamination, pre-ablation was performed for 10 s. We avoided cracked parts, former shrinkage bubbles, spinel inclusions and edges of melt inclusions for all measurements except for the samples RAV-08 OL-10 MI-01 and RAV-20 OL-07 MI-01 for which laser spots for Pb isotope analysis partially overlap the surrounding host olivines because otherwise there was not enough room for LA. The signal intensity and isotope ratios were monitored during each sample run by time-resolving analysis. When unusual change in signal intensity or isotope ratios was encountered, such data were discarded. The 206Pb, 207Pb and 208Pb beam intensities were simultaneously measured using multiple Faraday collectors equipped with a high-gain 1 × 1013 Ω resistor. Other isotopes, such as 200Hg, 202Hg and 204Pb, were monitored using Faraday collectors with a normal 1 × 1011 Ω resistor. An SRM 612 synthetic glass standard from the National Institute of Standards and Technology (NIST) was measured before and after each unknown sample for external mass bias correction by applying a bracketing method. The measurements were performed on two separate days, and, for quality control of the data, the USGS-supplied BCR-2G and BHVO-2G international basalt glass standards were measured five times each day prior to analysing unknown samples (Supplementary Table 2). All reference values for the glass standards are from the GeoReM database56. We found that the range of Pb isotope ratios observed in unknown samples was far greater than the measured isotopic variation of the SRM 612 bracketing standard during the sample runs (Supplementary Fig. 7).
Host rock description
Basalts from the Austral–Cook Islands chain show diverse isotopic compositions21,25,60. Among these islands, Mangaia, Rurutu, Tubuai and Raivavae have been recognised as locations where robust HIMU geochemical signatures (ie, radiogenic Pb isotopes) occur. Raivavae basalts can be divided into two groups, Rairua Formation and Anatonu Formation basalts, based on field observations, ages and chemical compositions25,61,62. Rairua Formation basalts have K-Ar ages between 7.4 and 10.6 Ma, and are characterised by radiogenic Pb isotopes with 206Pb/204Pb ≥ 20.5. Anatonu Formation basalts have ages between 5.4 and 6.4 Ma, and are characterised by Pb isotopes that are less radiogenic (206Pb/204Pb ≤ 20.1). Isotopic compositions of the host basalts that we used in this study are presented previously62. Large isotopic variation is a common feature shared by other volcanic islands in this hotspot chain. For example, subaerial and submarine basalts on the neighbouring island of Tubuai show bimodal Pb isotopic compositions63.
Correction for post-entrapment crystallisation
Olivine-hosted melt inclusions from Raivavae are internally nonhomogeneous due to the presence of daughter minerals that crystallised from the original melts when the host basalts experienced slow cooling. Melt inclusions can be further differentiated by olivine overgrowth on the wall of the melt inclusions64. In principle, such post-entrapment crystallisation can be reversed by reheating and subsequent quenching of inclusions. However, in some cases, when we applied reheating, it was not sufficient to dissolve all the olivine overgrowth, which are difficult to recognise by an optical observation under a microscope. Conversely, inclusions could have been overheated, causing excess olivine from the surrounding olivine crystals to dissolve65. We computed original melt inclusion compositions by determining the proportion of olivine added to or subtracted from the inclusions, ie, the correction factor. Our calculation scheme is conventional: starting with olivine that is in Fe/Mg equilibrium with the melt, we iteratively added it to or subtracted it from inclusions until the calculated Fe/Mg of the inclusions reached equilibrium with the surrounding host olivine66. The major element composition of the host olivine was determined using an EPMA. We assumed the Fe/Mg partition coefficient between olivine and melt to be 0.367. The correction factor is within 20% for all studied melt inclusions and within 5% for most of them. The chemical compositions of the inclusions (Supplementary Table 1) were reported after correcting for these effects, assuming that olivine is free of elements other than Mg, Fe and Si. The change of SiO2 content due to the correction is within 0.5 wt% for most of the melt inclusions.
All data generated during this study are included in this published Article and its Supplementary Data files.
Kendrick, M. A. et al. Seawater cycled throughout Earth’s mantle in partially serpentinized lithosphere. Nat. Geosci. 10, 222–228 (2017).
Straub, S. M. & Layne, G. D. The systematics of chlorine, fluorine, and water in Izu arc front volcanic rocks: implications for volatile recycling in subduction zones. Geochim. Cosmochim. Acta 67, 4179–4203 (2003).
Pagé, L., Hattori, K., de Hoog, J. C. M. & Okay, A. I. Halogen (F, Cl, Br, I) behaviour in subducting slabs: a study of lawsonite blueschists in western Turkey. Earth Planet. Sci. Lett. 442, 133–142 (2016).
Kendrick, M. A., Scambelluri, M., Honda, M. & Phillips, D. High abundances of noble gas and chlorine delivered to the mantle by serpentinite subduction. Nat. Geosci. 4, 807–812 (2011).
Schmidt, M. W. & Poli, S. in Treatise on Geochemistry 2nd edn (eds Holland, H. D. & Turekian, K. K.) 669–701 (Elsevier, Oxford, 2014).
Kimura, J.-I., Gill, J. B., Skora, S., van Keken, P. E. & Kawabata, H. Origin of geochemical mantle components: role of subduction filter. Geochem. Geophys. Geosyst. 17, 3289–3325 (2016).
Becker, H., Jochum, K. P. & Carlson, R. W. Trace element fractionation during dehydration of eclogites from high-pressure terranes and the implications for element fluxes in subduction zones. Chem. Geol. 163, 65–99 (2000).
Stracke, A., Bizimis, M. & Salters, V. J. M. Recycling oceanic crust: quantitative constraints. Geochem. Geophys. Geosyst. 4, 8003 (2003).
Tomlinson, E. L., Jones, A. P. & Harris, J. W. Co-existing fluid and silicate inclusions in mantle diamond. Earth Planet. Sci. Lett. 250, 581–595 (2006).
Weiss, Y., McNeill, J., Pearson, D. G., Nowell, G. M. & Ottley, C. J. Highly saline fluids from a subducting slab as the source for fluid-rich diamonds. Nature 524, 339–342 (2015).
Pearson, D. G. et al. Hydrous mantle transition zone indicated by ringwoodite included within diamond. Nature 507, 221–224 (2014).
Stroncik, N. A. & Haase, K. M. Chlorine in oceanic intraplate basalts: constraints on mantle sources and recycling processes. Geology 32, 945–948 (2004).
John, T., Layne, G. D., Haase, K. M. & Barnes, J. D. Chlorine isotope evidence for crustal recycling into the Earth’s mantle. Earth Planet. Sci. Lett. 298, 175–182 (2010).
John, T., Scambelluri, M., Frische, M., Barnes, J. D. & Bach, W. Dehydration of subducting serpentinite: implications for halogen mobility in subduction zones and the deep halogen cycle. Earth Planet. Sci. Lett. 308, 65–76 (2011).
Shimizu, K. et al. Two-component mantle melting-mixing model for the generation of mid-ocean ridge basalts: implications for the volatile content of the Pacific upper mantle. Geochim. Cosmochim. Acta 176, 44–80 (2016).
Michael, P. J. & Cornell, W. C. Influence of spreading rate and magma supply on crystallization and assimilation beneath mid-ocean ridges: evidence from chlorine and major element chemistry of mid-ocean ridge basalts. J. Geophys. Res. 103, 18325–18356 (1998).
Saal, A. E., Hauri, E. H., Langmuir, C. H. & Perfit, M. R. Vapour undersaturation in primitive mid-ocean-ridge basalt and the volatile content of Earth’s upper mantle. Nature 419, 451–455 (2002).
Cabral, R. A. et al. Volatile cycling of H2O, CO2, F, and Cl in the HIMU mantle: a new window provided by melt inclusions from oceanic hot spot lavas at Mangaia, Cook Islands. Geochem. Geophys. Geosyst. 15, 4445–4467 (2014).
Lassiter, J. C., Hauri, E. H., Nikogosian, I. K. & Barsczus, H. G. Chlorine-potassium variations in melt inclusions from Raivavae and Rapa, Austral Islands: constraints on chlorine recycling in the mantle and evidence for brine-induced melting of oceanic crust. Earth Planet. Sci. Lett. 202, 525–540 (2002).
Bonifacie, M. et al. The chlorine isotope composition of Earth’s mantle. Science 319, 1518–1520 (2008).
Chauvel, C., Hofmann, A. W. & Vidal, P. HIMU-EM: the French Polynesian connection. Earth Planet. Sci. Lett. 110, 99–119 (1992).
French, S. W. & Romanowicz, B. Broad plumes rooted at the base of the Earth’s mantle beneath major hotspots. Nature 525, 95–99 (2015).
Suetsugu, D. et al. South Pacific mantle plumes imaged by seismic observation on islands and seafloor. Geochem. Geophys. Geosyst. 10, Q11014 (2009).
Jackson, M. G., Becker, T. W. & Konter, J. G. Evidence for a deep mantle source for EM and HIMU domains from integrated geochemical and geophysical constraints. Earth Planet. Sci. Lett. 484, 154–167 (2018).
Lassiter, J. C., Blichert-Toft, J., Hauri, E. H. & Barsczus, H. G. Isotope and trace element variations in lavas from Raivavae and Rapa, Cook-Austral islands: constraints on the nature of HIMU- and EM-mantle and the origin of mid-plate volcanism in French Polynesia. Chem. Geol. 202, 115–138 (2003).
Yurimoto, H. et al. Lead isotopic compositions in olivine-hosted melt inclusions from HIMU basalts and possible link to sulfide components. Phys. Earth Planet. Inter. 146, 231–242 (2004).
Saal, A. E., Hart, S. R., Shimizu, N., Hauri, E. H. & Layne, G. D. Pb isotopic variability in melt Inclusions from oceanic island basalts, Polynesia. Science 282, 1481–1484 (1998).
Saal, A. E. et al. Pb isotopic variability in melt inclusions from the EMI–EMII–HIMU mantle end-members and the role of the oceanic lithosphere. Earth Planet. Sci. Lett. 240, 605–650 (2005).
Paul, B. et al. Melt inclusion Pb-isotope analysis by LA–MC-ICPMS: assessment of analytical performance and application to OIB genesis. Chem. Geol. 289, 210–223 (2011).
Lassiter, J. C. Role of recycled oceanic crust in the potassium and argon budget of the Earth: toward a resolution of the “missing argon” problem. Geochem. Geophys. Geosyst. 5, Q11012 (2004).
Hirschmann, M. M., Kogiso, T., Baker, M. B. & Stolper, E. M. Alkalic magmas generated by partial melting of garnet pyroxenite. Geology 31, 481–484 (2003).
Gerbode, C. & Dasgupta, R. Carbonate-fluxed melting of MORB-like pyroxenite at 2.9 GPa and genesis of HIMU ocean island basalts. J. Petrol. 51, 2067–2088 (2010).
Dasgupta, R., Jackson, M. G. & Lee, C.-T. A. Major element chemistry of ocean island basalts — conditions of mantle melting and heterogeneity of mantle source. Earth Planet. Sci. Lett. 289, 377–392 (2010).
Jackson, M. G. & Dasgupta, R. Compositions of HIMU, EM1, and EM2 from global trends between radiogenic isotopes and major elements in ocean island basalts. Earth Planet. Sci. Lett. 276, 175–186 (2008).
Hauri, E. H., Shimizu, N., Dieu, J. J. & Hart, S. R. Evidence for hotspot-related carbonatite metasomatism in the oceanic upper mantle. Nature 365, 221–227 (1993).
Dasgupta, R., Hirschmann, M. M., McDonough, W. F., Spiegelman, M. & Withers, A. C. Trace element partitioning between garnet lherzolite and carbonatite at 6.6 and 8.6 GPa with applications to the geochemistry of the mantle and of mantle-derived melts. Chem. Geol. 262, 57–77 (2009).
Sano, T. et al. Boron and chlorine contents of upper oceanic crust: basement samples from IODP hole 1256D. Geochem. Geophys. Geosyst. 9, Q12O15 (2008).
Barnes, J. D. & Cisneros, M. Mineralogical control on the chlorine isotope composition of altered oceanic crust. Chem. Geol. 326-327, 51–60 (2012).
Svensen, H., Jamtveit, B., Banks, D. A. & Austrheim, H. Halogen contents of eclogite facies fluid inclusions and minerals: caledonides, western Norway. J. Metamorph. Geol. 19, 165–178 (2001).
Barnes, J. D., Manning, C. E., Scambelluri, M. & Selverstone, J. in The Role of Halogens in Terrestrial and Extraterrestrial Geochemical Processes: Surface, Crust, and Mantle (eds Harlov, D. E. & Aranovich, L.) 545–590 (Springer International Publishing, Cham, 2018).
Debret, B. et al. Volatile (Li, B, F and Cl) mobility during amphibole breakdown in subduction zones. Lithos 244, 165–181 (2016).
Marschall, H. R., Altherr, R., Gméling, K. & Kasztovszky, Z. Lithium, boron and chlorine as tracers for metasomatism in high-pressure metamorphic rocks: a case study from Syros (Greece). Mineral. Petrol. 95, 291 (2009).
Dalou, C., Koga, K. T., Shimizu, N., Boulon, J. & Devidal, J.-L. Experimental determination of F and Cl partitioning between lherzolite and basaltic melt. Contrib. Mineral. Petrol. 163, 591–609 (2012).
Joachim, B. et al. Experimental partitioning of F and Cl between olivine, orthopyroxene and silicate melt at Earth’s mantle conditions. Chem. Geol. 416, 65–78 (2015).
Hauri, E., Gaetani, G. & Green, T. Partitioning of water during melting of the Earth’s upper mantle at H2O-undersaturated conditions. Earth Planet. Sci. Lett. 248, 715–734 (2006).
Hiraga, T., Anderson, I. M. & Kohlstedt, D. L. Grain boundaries as reservoirs of incompatible elements in the Earth’s mantle. Nature 427, 699–703 (2004).
Thomson, A. R., Walter, M. J., Kohn, S. C. & Brooker, R. A. Slab melting as a barrier to deep carbon subduction. Nature 529, 76–79 (2016).
Weiss, Y., Class, C., Goldstein, S. L. & Hanyu, T. Key new pieces of the HIMU puzzle from olivines and diamond inclusions. Nature 537, 666–670 (2016).
Allègre, C. J., Hofmann, A. W. & O’Nions, K. The argon constraints on mantle structure. Geophys. Res. Lett. 23, 3555–3557 (1996).
Sharp, Z. D. & Draper, D. S. The chlorine abundance of Earth: implications for a habitable planet. Earth Planet. Sci. Lett. 369–370, 71–77 (2013).
Knauth, L. P. Temperature and salinity history of the Precambrian ocean: implications for the course of microbial evolution. Palaeogeogr. Palaeoclimatol. Palaeoecol. 219, 53–69 (2005).
Hamada, M. et al. High-precision in situ analysis of Pb isotopes in melt inclusions by LA-ICP-MS and application of independent component analysis. Geochem. J. 51, 69–74 (2018).
Shimizu, K. et al. H2O, CO2, F, S, Cl, and P2O5 analyses of silicate glasses using SIMS: report of volatile standard glasses. Geochem. J. 51, 299–313 (2017).
Shimizu, K. et al. Simultaneous determinations of fluorine, chlorine, and sulfur in rock samples by ion chromatography combined with pyrohydrolysis. Geochem. J. 49, 113–124 (2015).
Kimura, J.-I. & Chang, Q. Origin of the suppressed matrix effect for improved analytical performance in determination of major and trace elements in anhydrous silicate samples using 200 nm femtosecond laser ablation sector-field inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 27, 1549–1559 (2012).
Jochum, K. P. et al. GeoReM: a new geochemical database for reference materials and isotopic standards. Geostand. Geoanal. Res. 29, 333–338 (2005).
Kimura, J.-I., Chang, Q., Kanazawa, N., Sasaki, S. & Vaglarov, B. S. High-precision in situ analysis of Pb isotopes in glasses using 1013 Ω resistor high gain amplifiers with ultraviolet femtosecond laser ablation multiple Faraday collector inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 31, 790–800 (2016).
Chang, Q., Kimura, J.-I., Miyazaki, T., Sasaki, S. & Kanazawa, N. Microanalysis of Pb isotope ratios of low-Pb glass samples by femtosecond laser ablation-multiple ion counter-ICP-mass spectrometry (fsLA-MIC-ICP-MS). Geochem. J. 48, 309–320 (2014).
Hauff, F., Hoernle, K. & Schmidt, A. Sr-Nd-Pb composition of mesozoic Pacific oceanic crust (site 1149 and 801, ODP Leg 185): implications for alteration of ocean crust and the input into the Izu-Bonin-Mariana subduction system. Geochem. Geophys. Geosyst. 4, 8913 (2003).
Woodhead, J. D. Extreme HIMU in an oceanic setting: the geochemistry of Mangaia Island (Polynesia), and temporal evolution of the Cook–Austral hotspot. J. Volcanol. Geotherm. Res. 72, 1-19 (1996).
Maury, R. C. et al. Temporal evolution of a Polynesian hotspot: New evidence from Raivavae (Austral islands, South Pacific ocean). Bull. Soc. Géol. France 184, 557-567 (2013).
Miyazaki, T. et al. Clinopyroxene and bulk rock Sr–Nd–Hf–Pb isotope compositions of Raivavae ocean island basalts: Does clinopyroxene record early stage magma chamber processes? Chem. Geol. 482, 18-31 (2018).
Hanyu, T. et al. Geochemical diversity in submarine HIMU basalts from Austral Islands, French Polynesia. Contrib. Mineral. Petrol. 166, 1285-1304 (2013).
Danyushevsky, L. V., McNeill, A. W. & Sobolev, A. V. Experimental and petrological studies of melt inclusions in phenocrysts from mantle-derived magmas: an overview of techniques, advantages and complications. Chem. Geol. 183, 5-24 (2002).
Wallace, P. J., Kamenetsky, V. S. & Cervantes, P. Melt inclusion CO2 contents, pressures of olivine crystallization, and the problem of shrinkage bubbles. Am. Mineral. 100, 787-794 (2015).
Kent, A. J. R. Melt inclusions in basaltic and related volcanic rocks. Rev. Mineral. Geochem. 69, 273-331 (2008).
Putirka, K. D., Perfit, M., Ryerson, F. J. & Jackson, M. G. Ambient and excess mantle temperatures, olivine thermometry, and active vs. passive upwelling. Chem. Geol. 241, 177-206 (2007).
We thank Kyoto Fission-Track Co. Ltd. for their preparation of olivine separates. Careful review by M.G. Jackson has greatly improved the manuscript. This work was supported by JSPS KAKENHI grant numbers JP26400527, 17H02994 (T.H.), JP15H02148, and JP16H01123, JP18H04372 (J.-I.K.), and 15H03751 (K.S.)
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Hanyu, T., Shimizu, K., Ushikubo, T. et al. Tiny droplets of ocean island basalts unveil Earth’s deep chlorine cycle. Nat Commun 10, 60 (2019). https://doi.org/10.1038/s41467-018-07955-8
Geochimica et Cosmochimica Acta (2020)
Extremely light K in subducted low-T altered oceanic crust: Implications for K recycling in subduction zone
Geochimica et Cosmochimica Acta (2020)
Bromine speciation and partitioning in slab-derived aqueous fluids and silicate melts and implications for halogen transfer in subduction zones
Solid Earth (2020)
The distribution and abundance of halogens in eclogites: An in situ SIMS perspective of the Raspas Complex (Ecuador)
American Mineralogist (2020)
Oxygen isotope speedometry in granulite facies garnet recording fluid/melt–rock interaction (Sør Rondane Mountains, East Antarctica)
Journal of Metamorphic Geology (2019)