Beaming random lasers with soliton control


Random lasers are resonator-less light sources where feedback stems from recurrent scattering at the expense of spatial profile and directionality. Suitably-doped nematic liquid crystals can random lase when optically pumped near resonance(s); moreover, through molecular reorientation within the transparency region, they support self-guided optical spatial solitons, i.e., light-induced waveguides. Here, we synergistically combine solitons and collinear pumping in weakly scattering dye-doped nematic liquid crystals, whereby random lasing and self-confinement concur to beaming the emission, with several improved features: all-optical switching driven by a low-power input, laser directionality and smooth output profile with high-conversion efficiency, externally controlled angular steering. Such effects make soliton-assisted random lasers an outstanding route towards application-oriented random lasers.


Random lasers (RL) are cavityless light sources1, versatile in geometry, wavelength, and potential applications ranging from imaging to cancer diagnostics2,3,4, but such advantages are accompanied by poor spatial characteristics of the emitted light5. The quest for output directionality and improved profile6 was previously addressed using, e.g., fibers7,8, microchannels9, tailored pump10, and nanostructures11.

Weakly scattering nematic liquid crystals (NLC) with organic dopants were used earlier for RL in thin cells, capillaries and free-standing films, exploiting thermal and electro-optic responses to adjust the emission wavelength and the efficiency12,13,14,15,16,17,18,19,20,21. NLC consist of elongated molecules with orientational order along the molecular director (optic-axis) n. Its thermal dynamics, through fluctuations in the local dielectric tensor, cause anisotropic light scattering22, which can yield weak light-localization and feedback for lasing in the presence of optical amplification. Common NLC also exhibit birefringence and a large reorientational optical nonlinearity23, which supports self-guided beams—nematicons—of linearly polarized light at mW-powers and over mm-propagation distances24. Owing to the nonlocal response of such soft-matter, nematicons are stable three-dimensional optical spatial solitons25; in uniaxial NLC they are extraordinary waves—which walk-off with the Poynting vector at a few degrees with the wave-vector (Methods)26—and operate as light-induced graded-index channels for co-polarized signals of arbitrary wavelengths24.

Hereby, we demonstrate that in dye-doped liquid crystals a suitable combination of passive nonlinear optics—namely near-infrared nematicons through self-focusing- and light-matter interaction—namely lasing in random media with optical pumping—can resolve a few crucial issues of RL. The investigated soliton-enhanced random laser is highly efficient and exhibits a smooth and directional emission, with output angle controlled by external stimuli such as voltage; it can also be turned off/on by a low-power near-infrared input. These novel features can potentially boost the impact of soft-matter RL on photonics as well as other areas where cavityless/tunable lasers are potentially relevant, including cancer therapy, sensing, and speckle-free imaging.


Nematicon-assisted random laser in liquid crystals

We used the NLC host E7 with 0.3 wt% pyrromethene 597 (guest dye) in planar cells to obtain random lasing in the initial (input) region of a near-infrared nematicon. Figure 1a, b shows the sample geometry and experimental setup. To generate a soliton in a 100 μm-thick 2 mm-long planar cell containing the dye-doped NLC, a continuous-wave (cw) beam at 1.064 μm was launched along z with electric field linearly polarized in the principal plane yz; n was aligned in the same plane at 45° with respect to z as to maximize the optical nonlinearity (i.e., reduce the power supporting the formation of nematicons)24,27. To pump the guest–host medium, an ordinary wave (with electric field //x) 6 ns-pulse beam at wavelength 532 nm was co-injected along z. In this configuration with molecular orientation defined by boundary conditions at the interfaces (see Methods), a pump beam with linear polarization orthogonal to n yielded the highest conversion rate to fluorescence and forward RL emission28. Pump pulse-duration, repetition-rate (20 Hz) and energy prevented significant reorientational and/or thermal nonlinear effects. Green and NIR beams were focused in the same position with comparable waists of 3 μm, i.e., a power density of 35.4 μW/μm2 per 1 mW cw NIR input and a power density of 5.9 W/μm2 per 1 μJ green input pulse. The resulting fluorescence and stimulated emission in the visible spectrum (around 580 nm) were co-polarized with—and therefore confined by—the nematicon. Owing to birefringent walk-off, the nematicon propagated in yz at an angle of about 7° off z, see Fig. 1f. The soliton was not only able to collect and guide fluorescence and stimulated emission due to pumping within the guest–host absorption spectrum, but also to affect the evolution of lasing modes in the longitudinally extended volume5, enhancing both RL directionality and profile. While some preliminary results on RL slope efficiency and spectral narrowing were reported earlier28,29, some salient basic features of soliton-aided RL are presented in Fig. 1c-f with reference to samples investigated hereby.

Fig. 1

Configuration and basic features of nematicon-assisted random laser. a Planar cell configuration and orientation. Here, the two wires allude to the application of a bias voltage across the cell thickness (see Methods). The molecular director distribution n (optic-axis) is represented by blue ellipses. b Sketch of the basic experimental setup, with green pulsed pump and continuous-wave near-infrared (NIR) lasers, microscope objectives (OBJ) to inject and collect light, beam splitters (BS), polarisers (P), waveplates (λ/2), notch filters (F1 and F2), spectrometer (SM). c Typical input–output random laser characteristics for various soliton powers and an ordinary-wave pump, from the mean peak intensity. The legend indicates the input power of the near-infrared nematicon. d As in c but from the integrated variance \(\sigma _I^2\) of the averaged spectra (see Eq. (9) in the Methods) over 200 gated acquisitions (in 100 ms windows), carrying out the analysis detailed in the Methods. The error bars in c and d correspond to standard deviation over 200 acquisitions. e Photograph of emitted random laser light in the yz plane for a pump energy E = 0.55 μJ, without nematicon. f As in e but in the presence of a 6 mW nematicon (the near-infrared was filtered out). The scale bars indicate a length of 500 μm

Due to randomness of the system and the substantial pedestal provided by fluorescence and amplified spontaneous emission (ASE), the lasing peaks emerged from the latter background, as typical of RLs. We first extracted the maximum intensity counts from each acquired emission spectrum, Fig. 1c, with lasing threshold at energies around 0.48 μJ and slope efficiency clearly improved by nematicons. Such threshold could not be retrieved when calculating the average intensity (\(\bar I\), Methods) integrated versus wavelength over several gated spectral acquisitions (Supplementary Figure 3). Hence, we resorted to the statistical analysis of the intensity variance \(\sigma _I^2\) (sensitive to fluctuations), as summarized in the Methods. This approach yielded the in-out curves Fig. 1d, where a threshold can be readily appreciated and matches the one in Fig. 1c.

Figure 2 displays the emitted spectra averaged over several gated acquisitions and collected at the output (after propagation along z) with/without nematicons of various powers co-launched with the pump below/above RL threshold. This illustrates the transition from fluorescence to ASE to random lasing: the effect of the nematicon is negligible at low energies, as the waveguide simply increases the collected fluorescence or ASE30; its role, however, becomes pronounced at higher pump energies, contributing to narrower multihump spectra and more intense lasing peaks. The transition (vs. energy) from the ASE stochastic spikes to the RL lasing peaks is boosted by the all-optical waveguide, which affects multiple scattering and shrinks the overall spectra in the pumped region near the sample input. As observed in ref.5 and further reported in ref.21, the lasing peaks emerging from various realizations presented random amplitudes, but remained regularly spaced vs. wavelength when averaging over large numbers of pump shots (up to 200 gated measurements in 100 ms windows). Their separation suggests an equivalent cavity ≈130 μm long, comparable to the extent of the conical region where the pump is absorbed, as observed (via out-of-plane light diffusion) from above the cell (Fig. 1e). This appears consistent with weak scattering close to the regime of under-coupling (i.e., a cavity much shorter than the nematicon)5, although it was not experimentally ascertained as higher pump energies (needed to lengthen the cavity) induced bleaching and saturation29, to be further investigated. The negligible change in frequency spacing versus soliton power pinpoints the role of absorption in limiting the extent of the effective resonator5, enabling stimulated emission only in the initial fraction of the pumped volume.

Fig. 2

Emission spectra in the presence of nematicon. Spectral emission normalized to unity for nematicons of various powers (colors) co-launched with the ordinary-wave pump, averaged over 200 gated acquisitions. a Pump pulse energy E = 0.40 μJ. b E = 0.48 μJ. c E = 0.51 μJ. d E = 0.55 μJ

Spatial profile and efficiency of random laser

The transversely localized RL spikes within the NIR nematicon tend to evolve along the waveguide, resulting in smoother profiles than the hot-spots commonly observed in thin samples12,16,17. Figure 3 shows typical RL output profiles, without/with a co-propagating nematicon. In the first case, RL light yields a diffuse pattern with low intensity; in the second case, instead, the emitted radiation remains essentially confined within the NIR-induced light channel. In essence, the (nonorthogonal) RL modes evolve and walk-off along the extraordinary wave soliton (Fig. 1f), interacting within the all-optical waveguide and roughly resulting in a bell-shape31. Conversely, in backward-emission experiments with light collected as it back-propagated out of the bulk toward the input, typical RL profiles were qualitatively different and exhibited several hot-spots (Supplementary Figure 5). Exploiting the achieved beaming of this random laser, in Fig. 3c we present the measured output energy vs. pump input energy above threshold, for various NIR nematicon powers. The measured values, averaged over 200 shots and corrected for Fresnel losses of the pump at the input interface (≈4%), Fresnel losses of the emitted light at the output interface (≈4%), and at the optical elements (≈17.6%) before the detector (F1, F2, OBJ2 in Fig. 1b), yield input/output conversion efficiencies as high as 2.62% when pumping at 0.6 μJ/pulse and co-launching NIR solitons at 6 mW, a substantial figure when considering the propagation losses over the 2 mm-long sample. Assuming scattering and absorption losses close to 6.95 cm−1 at visible wavelengths in the host NLC32, in the limit of a random laser with soliton propagation within the actively pumped region of ≈130 μm (see above), then the extrapolated conversion efficiency reaches a remarkable 9.62%. Such a high figure in organic soft-matter compares well with those measured in Sulforhodamine B with TiO233.

Fig. 3

Directional random lasing. Random lasing observed at the output facet of the sample, in the plane xy, for pump pulses above threshold, E = 0.55 μJ. a Emitted light without a co-launched nematicon; b emitted light in the presence of 6 mW nematicon (the near-infrared was filtered out). The white dashed circle indicates the position of the input beam, launched with wave-vector parallel to z. The lateral displacement of the random laser spot is due to soliton walk-off in the plane yz. The scale bars refer to a length of 100 μm. c Output random laser energy versus pump energy/pulse above threshold for various near-infrared nematicon powers. The measured values are averaged over 200 samples and corrected for Fresnel reflection losses due to filters, lens, and cell output facet

Transistor-like operation of nematicon random laser

Remarkably, in nematicon-assisted RL we could all-optically increase photon collection as well as pump–matter interaction and bring the system above threshold, turning-on the laser with continuous-wave NIR. Figure 4 shows 100 ms-gated emission spectra collected for pump energies well-below, almost at and above threshold in the presence of (red lines) or without (black lines) a 6 mW NIR nematicon, respectively. When injecting the latter in the system below threshold, no appreciable changes could be observed in the spontaneous emission (Fig. 4a); above threshold (Fig. 4c) the nematicon induced spectral shift and narrowing, with the appearance of more numerous and intense lasing peaks; almost at threshold (Fig. 4b) the soliton switched-on the RL, demonstrating a remarkable means to modulate the RL operation by a low-power nonresonant input and so realize a random transistor-laser (see also Supplementary Figure 4). Noteworthy, this all-optical switching does not rely on absorption and photothermal response19, but only on the linearly polarized NIR beam able to launch reorientational solitons.

Fig. 4

Soliton switching of random laser. Emission spectra gated over 100 ms, obtained without (black lines) and with a co-launched 6 mW nematicon (red lines) when the pump energy per pulse (in the absence of near-infrared input) is a below threshold (E = 0.45 μJ), b almost at (E = 0.48 μJ), c above threshold (E = 0.55 μJ)

Angular steering of the random laser emission

Nematicons are light-induced waveguides whose trajectories can be deviated by external stimuli acting on the director distribution24. This allows steering the directional RL emission at will and beaming it to various output destinations. To demonstrate this in a simple case, we used thin film electrodes to apply a voltage across the cell thickness x in order to alter the principal plane yz of soliton propagation and its observable walk-off26. Figure 5a, b compares the RL emitted streaks along the observation plane yz for V = 0 V (Fig. 5a) and V = 2 V (Fig. 5b), respectively, when pumping above threshold. As V increases, the director realigns toward x and the nematicon changes direction and moves toward an ordinary-wave configuration with Poynting vector S//k//z, with a vanishing walk-off (Supplementary Figure 2). Although the vector S evolves on the surface of a cone (with axis in yz and apex angle defined by the initial walk-off, see Methods and Supplementary Figure 2), the RL streak gets steered from 7° to nearly 0°, as graphed in Fig. 5f, with an overall y-displacement of about 245 μm at the output. The photographs in Fig. 5c, d show the RL output profile for V = 0 (Fig. 5c) and V = 2 V (Fig. 5d), respectively. The RL light diffusing out of the soliton at high voltage is attributed to the interplay of electro-optic reorientation and scattering at the cell entrance where boundaries play a stronger role; moreover, as the fixed-power nematicon evolves versus voltage towards an ordinary-wave configuration (S//k), it becomes progressively less confined/confining as the associated waveguide has a lower index contrast. Correspondingly, the emitted RL spectra exhibit lower peak intensities, as apparent in Fig. 5e. Despite the fact that the angular steering was not optimized for in-plane re-addressing, these results demonstrate a directional RL emission, with pointing control adjusted by external stimuli such as voltage. Effective RL beaming can also be achieved by adopting alternative strategies to modify the nematicon trajectory within the principal plane yz of propagation. These include inter-digitated electrodes on the planar interfaces34, external light beams altering the director distribution24, magnetic fields35. The latter approach, in particular, allows doubling the overall angular swing by rotating the magnetic field in yz around x.

Fig. 5

Controlled steering of soliton-assisted random laser emission. a Random lasing within a 5 mW near-infrared soliton, with walk-off at 7° in the plane yz in the absence of voltage bias. b Random lasing within a 5 mW near-infrared soliton, with vanishing walk-off at a bias V = 2 V. The scale bars in a and b indicate a length of 500 μm. c Output random laser spot in xy for V = 0 V, corresponding to a. d Output random laser spot in xy for V = 2 V, corresponding to b; the white dashed circles in c and d indicate the direction of the input wave-vector, the scale bars correspond to 100 μm. e Random laser emission spectra acquired at the 5 mW nematicon output for various applied voltages. f Measured (symbols with error bars, s.d.) and calculated (solid line) walk-off versus applied voltage (see Eq. (5) in the Methods). The error bars (in s.d. units) are computed over 25 acquisitions and the pump energy per pulse is well above threshold


We have designed, investigated, and reported a random laser in light-sculpted dye-doped NLC, whereby the synergy of the nonresonant reorientational nonlinear response with optical gain and weak scattering enables cavityless soliton-enhanced laser emission. Besides the high-conversion efficiency and spectral narrowing, this soft-matter laser system entails all-optical low-power switching, emission directionality with smooth profile and pointing control by external stimuli, thereby introducing soliton-adjustable NIR-controlled RL.

These results demonstrate the benefits of suitably combining diverse nonlinear optical responses; they also solve some RL vexing issues, specifically poor directionality and profile. We foresee this synergistic route to impact on practical resonator-less lasers in disordered weakly scattering soft-media.



Planar glass cells, 100 μm thick (x) 30 mm wide (y) and 2 mm long (z), were prepared with Borosilicate glass slides equipped with Indium Tin Oxide (ITO) thin film electrodes; the slides were subsequently spin-coated with polyimide and mechanically rubbed to ensure planar anchoring of the molecular director in the plane yz at 45° with respect to z, with a slight pretilt ≤2° to prevent the insurgence of the Freedericksz transition threshold and its angular degeneracy36 vs. applied voltage. Spacers were inserted to define the thickness. Glass microscope cover slides 160 µm thick were glued orthogonally to z in order to seal the cell and so define input and output facets. These extra interfaces prevented the formation of NLC menisci and uncontrolled light depolarization; they were also coated with polyimide and rubbed along y to optimize the coupling of y-polarized electric fields to extraordinary waves in the NLC37. A mixture of commercial E7 (Merck) and 0.3 wt% Pyrromethene 597 dye (Exciton) was introduced to fill the cell by capillary action. For the host medium at 1.064 μm the elastic constants for splay and twist deformations are K1 = 11.7 pN and K3 = 19.5 pN, respectively; the refractive indices along the principal axes are \(n_{\Vert}=1.71 \, {\rm and}\, n_{\bot}\) = 1.52.

Experimental setup

A frequency-doubled Nd:YAG laser operating in Q-switch at 20 Hz, 532 nm, and 6 ns pulses was the pump source; a NIR continuous-wave laser at 1.064 μm was the spatial optical soliton source. Waveplates, polarisers and a microscope objective were employed to focus and co-launch the orthogonally polarized (green and NIR) beams in the midplane (x = 50 μm) of the cell, avoiding reflections from upper and lower interfaces. Fluorescence and laser emission, as well as the NIR beam were imaged by NLC light scattering out of the observation plane yz and also in the transverse plane xy at the cell output, using optical microscopes and high-resolution CMOS cameras. A fiber-equipped spectrometer (Ocean Optics) was used to collect and spectrally resolve the emitted light, with a resolution of 0.15 nm; a Si-detector allowed measuring the random laser emission. Additional filtering elements were introduced whenever appropriate to eliminate pump and NIR light (see also Fig. 1b). A voltage bias from a 1 kHz generator could be applied across the cell thickness through the ITO electrodes. The AC voltage supply prevented undesired NLC convection and static charge effects.


In the reference system xyz indicated in Fig. 1, the propagation of extraordinary polarized light beams in an anisotropic nonlinear material obeys a nonlinear Schrödinger-like equation:

$$2in_{\mathrm{e}}\left( {\theta _0} \right)k_0\left[ {\frac{{\partial A}}{{\partial z}} + \tan \delta \left( {\theta _0} \right)\frac{{\partial A}}{{\partial y}}} \right] + D_{{y}}\frac{{\partial ^2A}}{{\partial y^2}} + k_0^2\Delta n_{\mathrm{e}}^2\left( {\theta _0,\phi } \right)A = 0$$

where A is the magnetic field envelope in the slowly varying amplitude approximation, k0 the vacuum wave number, \(\delta \left( {\theta _0} \right) = \arctan \left[ {\frac{{\varepsilon _{\mathrm{a}}\sin \left( {2\theta _0} \right)}}{{\varepsilon _{\mathrm{a}} + 2\varepsilon _ \bot + \varepsilon _a\cos \left( {2\theta _0} \right)}}} \right]\) the walk-off angle (\(\varepsilon _{\mathrm{a}} = n_{||}^2 - n_ \bot ^2\) is the optical anisotropy) at the orientation θ0 between k and n at rest, Dy the diffraction coefficient along the y direction (sample width), and \(\Delta n_{\mathrm{e}}^{}\left( {\theta _0,\phi } \right)\) the extraordinary wave refractive index potential well due to the nonlinear reorientation ϕ. The latter reorientation can be evaluated from the Euler–Lagrange equation23,24,38 modeling the competing contributions of the driving field (light beam in our case) and the restoring elastic forces in the NLC, resulting in the reorientation equation:

$$\nabla ^2\theta + \frac{{\varepsilon _0\varepsilon _{\mathrm{a}}Z_0^2}}{{4K\;n_{\mathrm{e}}^2(\theta _0)\cos ^2\delta }}\sin \left[ {2\left( {\theta - \delta } \right)} \right]\left| A \right|^2 = 0$$

where θ = θ0 + ϕ, K is the elastic Frank constant in the single elastic constant approximation (K ≈ K1 ≈ K3 ≈ 12 pN), ε0 the vacuum dielectric constant, Z0 the vacuum impedance. Thus, starting from θ0 and the forcing field, Eq. (2) determines the director orientation and the refractive index distribution to be considered in Eq. (1).

Equations (1) and (2) do not have—in general—exact soliton solutions27,39, but when integrated numerically with proper boundary conditions, they support reorientational spatial solitons in NLC—nematicons—with a nondiffracting transverse profile corresponding to the normal mode of the nonlocal graded-index waveguide described by \(\Delta n_e^{}\left( {\theta _0,\phi } \right)\)24,40. An example of the calculated evolution and profile of a near-infrared nematicon with the corresponding graded-index waveguide is provided in Supplementary Figure 1.

The Euler–Lagrange equation for the molecular director38, combined with the divergence-free condition for the electric displacement field, allows one to evaluate the voltage-driven elevation angle η of the optic axis n from the plane yz of the cell:

$$\left[ {\left( {\varepsilon _ \bot ^{{\mathrm{LF}}} + \Delta \varepsilon _{{\mathrm{LF}}}} \right)\sin ^2\left( \eta \right) + \varepsilon _ \bot ^{{\mathrm{LF}}}\cos ^2\left( \eta \right)} \right]\frac{{d^2V}}{{dx^2}} + \Delta \varepsilon _{{\mathrm{LF}}}\sin \left( {2\eta } \right)\frac{{d\eta }}{{dx}}\frac{{dV}}{{dx}} = 0$$
$$\frac{{d^2\eta }}{{dx^2}} + \frac{{\varepsilon _0\Delta \varepsilon _{{\mathrm{LF}}}}}{{2K}}\left( {\frac{{dV}}{{dx}}} \right)^2\sin (2\eta ) = 0$$

with V the applied low-frequency (LF) bias, \(\varepsilon _ \bot ^{{\mathrm{LF}}}\)and \(\Delta \varepsilon _{{\mathrm{LF}}}\) the dielectric constant (for electric field perpendicular to the optic-axis) and the dielectric anisotropy, respectively. In this case the integration is performed along the direction x of the applied electric field and the resulting angular distribution of the molecular director n provides the refractive index landscape in which the beam propagates24,26.

As the voltage is uniformly applied between the planar parallel (ITO) electrodes, the molecular director n is pulled out of the alignment plane yz toward the vertical axis x, resulting in a rotation of the principal plane. Note that the injected nematicon remains an extraordinary wave as it adiabatically evolves in polarization through the transition region close to the input interface41.

For a given η(V), the corresponding angle between k and n(V) becomes \(\psi = \arccos (\cos \eta \cos \theta _0)\), with the consequent angular steering of the Poynting vector S of the NIR soliton (yellow arrow in Supplementary Figure 2) and of the guided random laser emission, as seen in Fig. 5. It is straightforward to derive the projection of the voltage-dependent Poynting vector on the observation plane yz and compute the solid curve of the observed walk-off:

$$\alpha = \arctan \left( {\frac{{\tan \delta \cos \eta }}{{\sqrt {1 + \sin ^2\eta \cot ^2\theta _0} }}} \right)$$

as plotted in Fig. 5f.

Statistical analysis of the emission spectra

Random lasing emission in an extended system exhibits characteristic fluctuations. Specifically, the lasing modes emerge from the fluorescence/ASE background as spectral peaks at certain wavelengths (see, e.g., Fig. 2, Fig. 4, Supplementary Figure 4), where the intensity varies from shot to shot. The onset of lasing is therefore associated to deviations of the intensity from its average at a given wavelength and can be quantified by the corresponding variance42.

To analyze the emission properties of the NLC random laser, we calculate the average intensity and the variance over N output spectra, defined as

$$\bar I\left( \lambda \right) = \frac{1}{N}\mathop {\sum}\limits_{k = 1}^N {I_k} \left( \lambda \right),$$
$$\sigma _I^2\left( \lambda \right) = \frac{1}{{N - 1}}\mathop {\sum}\limits_{k = 1}^N {\left( {I_k\left( \lambda \right) - \bar I\left( \lambda \right)} \right)^2} ,$$

respectively, at a specific wavelength λ. It is important to note that \(\sigma _I^2\left( \lambda \right) = 0\) only for a constant spectrum over its recorded values. Sample data of the quantities (6) and (7) above are shown in Supplementary Figure 4 vs. wavelength for various pump energies and nematicon powers.

Furthermore, in order to gain insight on the global operation of the random laser, the average intensity and the variance can be integrated over the spectrometer response window. This approach allows one to study the system behavior over the whole spectral window \(\Delta \lambda = \lambda _{\max } - \lambda _{\min }\), measuring the integrated average intensity and integrated variance, respectively, defined as:

$${\bar {I}} = \frac{1}{{\Delta \lambda }}\int_{\lambda _{\min }}^{\lambda _{\max }} {\bar I\left( \lambda \right)} {\mathrm d}\lambda ,$$
$$\sigma _I^2 = \frac{1}{{\Delta \lambda }}\int_{\lambda _{\min }}^{\lambda _{\max }} {\sigma _I^2} \left( \lambda \right){\mathrm d}\lambda .$$

Since well-defined spikes above the fluorescence/ASE pedestal characterize the transition to lasing threshold, another useful parameter is the mean intensity maximum computed as:

$$\bar I_{\max } = \frac{1}{N}\mathop {\sum}\limits_{k = 1}^N {\max _\lambda } I_k\left( \lambda \right).$$

As random lasing cannot be completely separated from ASE and fluorescence contributions, the integrated average intensity \(\bar I\) (plotted in Supplementary Figure 3) does not exhibit a clear threshold even after the laser onset42, despite the presence of spikes above a certain pump level (see Fig. 2). The integrated variance Eq. (9), however, is remarkably sensitive to the emergence of spectral features, including fluctuations in the lasing peaks. Hence, it manifests a threshold as it appears in the mean peak intensity \(\bar I_{\max }\) (see Fig. 1c, d).

Data availability

The datasets generated and analyzed during the current study are presented in this published article (and its Supplementary Information) in aggregated form as figures/graphs and are available from the corresponding author upon reasonable request.


  1. 1.

    Cao, H. Lasing in random media. Waves Random Media 13, R1–R39 (2003).

    ADS  Article  Google Scholar 

  2. 2.

    Wiersma, D. S. The physics and applications of random lasers. Nat. Phys. 4, 359–367 (2008).

    CAS  Article  Google Scholar 

  3. 3.

    Redding, B., Choma, M. A. & Cao, H. Speckle-free laser imaging using random laser illumination. Nat. Photon. 6, 355–359 (2012).

    ADS  CAS  Article  Google Scholar 

  4. 4.

    Polson, R. C. & Varden, Z. V. Random lasing in human tissues. Appl. Phys. Lett. 85, 1289–1291 (2004).

    ADS  CAS  Article  Google Scholar 

  5. 5.

    Wu, X. et al. Random lasing in weakly scattering systems. Phys. Rev. A 74, 053812 (2006).

    ADS  Article  Google Scholar 

  6. 6.

    Wiersma, D. S. Clear directions for random lasers. Nature 539, 360–361 (2016).

    ADS  CAS  Article  Google Scholar 

  7. 7.

    de Matos, C. J. S. et al. Random fiber laser. Phys. Rev. Lett. 99, 153903 (2007).

    ADS  Article  Google Scholar 

  8. 8.

    Abaie, B. et al. Random lasing in an Anderson localizing optical fiber. Light Sci. Appl. 6, e17041 (2017).

    CAS  Article  Google Scholar 

  9. 9.

    Jorge, K. C. et al. Directional random laser source consisting of a HC-ARROW reservoir connected to channels for spectroscopic analysis in microfluidic devices. Appl. Opt. 55, 5393–5398 (2016).

    ADS  CAS  Article  Google Scholar 

  10. 10.

    Leonetti, M., Conti, C. & Lopez, C. Random laser tailored by directional stimulated emission. Phys. Rev. A 85, 043841 (2012).

    ADS  Article  Google Scholar 

  11. 11.

    Schönhuber, S. et al. Random lasers for broadband directional emission. Optica 3, 1035–1038 (2016).

    Article  Google Scholar 

  12. 12.

    Strangi, G. et al. Random lasing and weak localization of light in dye-doped nematic liquid crystals. Opt. Express 14, 7737–7744 (2006).

    ADS  CAS  Article  Google Scholar 

  13. 13.

    Ford, A. D., Morris, S. N. & Coles, R. J. Photonics and lasing in liquid crystals. Mat. Today 9, 36–42 (2006).

    CAS  Article  Google Scholar 

  14. 14.

    Lin, J.-H. et al. Manipulation of random lasing action from dye-doped liquid crystals infilling two-dimensional confinement single core capillary. IEEE Photon. J. 7, 1501809 (2015).

    Google Scholar 

  15. 15.

    Wiersma, D. S. & Cavalieri, S. Light emission: a temperature-tunable random laser. Nature 414, 708–709 (2001).

    ADS  CAS  Article  Google Scholar 

  16. 16.

    Ferjani, S. et al. Thermal behavior of random lasing in dye-doped nematic liquid crystals. Appl. Phys. Lett. 89, 121109 (2006).

    ADS  Article  Google Scholar 

  17. 17.

    Ferjani, S., Barna, V., De Luca, A., Versace, C. & Strangi, G. Random lasing in freely suspended dye-doped nematic liquid crystals. Opt. Lett. 33, 557–559 (2008).

    ADS  CAS  Article  Google Scholar 

  18. 18.

    Sznitko, L., Kaliciak, K., Adamow, A. & Mysliwiec, J. A random laser made of nematic liquid crystal doped with a laser dye. Opt. Mater. B 56, 121–128 (2016).

    ADS  CAS  Article  Google Scholar 

  19. 19.

    Bian, H. et al. Optically controlled random lasing based on photothermal effect in dye-doped nematic liquid crystals. Liq. Cryst. 41, 1436–1441 (2014).

    CAS  Article  Google Scholar 

  20. 20.

    Lee, C.-R. et al. Electrically controllable liquid crystal random lasers below the Freedericksz transition threshold. Opt. Express 19, 2391–2400 (2011).

    ADS  Article  Google Scholar 

  21. 21.

    Ye, L. et al. Tailoring of random lasing characteristics in dye-doped nematic liquid crystals. Appl. Phys. B 115, 303–309 (2014).

    ADS  CAS  Article  Google Scholar 

  22. 22.

    De Gennes, P. G. & Prost, J. The Physics of Liquid Crystals (Oxford University Press, New York, USA, 1993).

    Google Scholar 

  23. 23.

    Khoo, I. C. Nonlinear optics of liquid crystalline materials. Phys. Rep. 471, 221–267 (2009).

    ADS  CAS  Article  Google Scholar 

  24. 24.

    Peccianti, M. & Assanto, G. Nematicons. Phys. Rep. 516, 147–208 (2012).

    ADS  Article  Google Scholar 

  25. 25.

    Stegeman, G. I. & Segev, M. Optical spatial solitons and their interactions: universality and diversity. Science 286, 1518–1523 (1999).

    CAS  Article  Google Scholar 

  26. 26.

    Peccianti, M., Conti, C., Assanto, G., De Luca, A. & Umeton, C. Routing of highly anisotropic spatial solitons and modulational instability in liquid crystals. Nature 432, 733–737 (2004).

    ADS  CAS  Article  Google Scholar 

  27. 27.

    Alberucci, A., Piccardi, A., Peccianti, M., Kaczmarek, M. & Assanto, G. Propagation of spatial optical solitons in a dielectric with adjustable nonlinearity. Phys. Rev. A 82, 023806 (2010).

    ADS  Article  Google Scholar 

  28. 28.

    Perumbilavil, S. et al. Soliton-assisted random lasing in optically pumped liquid crystals. Appl. Phys. Lett. 109, 161105 (2016).

    ADS  Article  Google Scholar 

  29. 29.

    Perumbilavil, S. et al. All-optical guided-wave random laser in nematic liquid crystals. Opt. Express 25, 4672–4679 (2017).

    ADS  Article  Google Scholar 

  30. 30.

    Bolis, S., Virgili, T., Rajendran, S., Beeckman, J. & Kockaert, P. Nematicon-driven injection of amplified spontaneous emission into an optical fiber. Opt. Lett. 41, 2245–2248 (2016).

    ADS  CAS  Article  Google Scholar 

  31. 31.

    Florentin, R. et al. Shaping the light amplified in a multimode fiber. Light Sci. Appl. 6, e16208 (2017).

    CAS  Article  Google Scholar 

  32. 32.

    Wu, S.-T. & Lim, K.-C. Absorption and scattering measurements of nematic liquid crystals. Appl. Opt. 26, 1722–1727 (1987).

    ADS  CAS  Article  Google Scholar 

  33. 33.

    Van Soest, G. & Lagendijk, A. β factor in a random laser. Phys. Rev. E 65, 47601 (2002).

    Article  Google Scholar 

  34. 34.

    Barboza, R., Alberucci, A. & Assanto, G. Large electro-optic beam steering with nematicons. Opt. Lett. 36, 2611–2613 (2011).

    Article  Google Scholar 

  35. 35.

    Izdebskaya, Y., Shvedov, V., Assanto, G. & Krolikowski, W. Magnetic routing of light-induced waveguides. Nat. Commun. 8, 14452 (2017).

    ADS  CAS  Article  Google Scholar 

  36. 36.

    Alberucci, A., Piccardi, A., Kravets, N., Buchnev, O. & Assanto, G. Soliton enhancement of spontaneous symmetry breaking. Optica 2, 783–789 (2015).

    Article  Google Scholar 

  37. 37.

    Ye, L. et al. Study on the polarisation of random lasers from dye-doped nematic liquid crystals. Nanoscale Res. Lett. 12, 27–34 (2017).

    ADS  Article  Google Scholar 

  38. 38.

    Simoni, F. Nonlinear Optical Properties of Liquid Crystals (World Scientific, Singapore, 1997).

  39. 39.

    MacNeil, J. M. L., Smyth, N. F. & Assanto, G. Exact and approximate solutions for optical solitary waves in nematic liquid crystals. Physica D 284, 1–15 (2014).

    ADS  MathSciNet  Article  Google Scholar 

  40. 40.

    Conti, C., Peccianti, M. & Assanto, G. Route to nonlocality and observation of accessible solitons. Phys. Rev. Lett. 91, 073901 (2003).

    ADS  Article  Google Scholar 

  41. 41.

    Alberucci, A. et al. Self-healing generation of spatial solitons in liquid crystals. Opt. Lett. 30, 1381–1383 (2005).

    Article  Google Scholar 

  42. 42.

    Ghofraniha, N. et al. Experimental evidence of replica symmetry breaking in random lasers. Nat. Commun. 6, 6058 (2015).

    CAS  Article  Google Scholar 

Download references


This work was funded by the Academy of Finland through the Finland Distinguished Professor grant no. 282858.

Author information




G.A. conceived/directed the study and assembled the team, S.P., A.P. and R.B. conducted the measurements, O.B. and G.S. prepared the samples, G.A. and G.S. discussed and designed the random laser material and setup, R.B. carried out the statistical analysis, M.K. and G.A. supervised the activity. All the authors contributed to the manuscript preparation.

Corresponding author

Correspondence to Gaetano Assanto.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Perumbilavil, S., Piccardi, A., Barboza, R. et al. Beaming random lasers with soliton control. Nat Commun 9, 3863 (2018).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing