Abstract
In catalysis science stability is as crucial as activity and selectivity. Understanding the degradation pathways occurring during operation and developing mitigation strategies will eventually improve catalyst design, thus facilitating the translation of basic science to technological applications. Herein, we reveal the unique and general degradation mechanism of metallic nanocatalysts during electrochemical CO2 reduction, exemplified by different sized copper nanocubes. We follow their morphological evolution during operation and correlate it with the electrocatalytic performance. In contrast with the most common coalescence and dissolution/precipitation mechanisms, we find a potential-driven nanoclustering to be the predominant degradation pathway. Grand-potential density functional theory calculations confirm the role of the negative potential applied to reduce CO2 as the main driving force for the clustering. This study offers a novel outlook on future investigations of stability and degradation reaction mechanisms of nanocatalysts in electrochemical CO2 reduction and, more generally, in electroreduction reactions.
Similar content being viewed by others
Introduction
Correlating activity, selectivity, and stability with the morphology and composition of nanocatalysts is crucial to advancing the knowledge in chemical transformations which are important to progress toward a more sustainable economy. Yet, still more emphasis needs to be placed on elucidating catalyst degradation mechanisms1. Electrochemical CO2 reduction reaction (CO2RR) into value-added chemicals is among the most challenging, underexplored and fast developing fields in catalysis. Because it enables concurrent carbon fixation and renewable energy storage, this conversion represents a sustainable approach to mitigating global challenges arising from the substantial utilization of fossil fuels and from the ever-increasing atmospheric CO22. Cu is an appealing catalyst for CO2RR, as it produces appreciable amounts of highly sought after energy-dense hydrocarbons, such as CH4, C2H4, and C2H63,4,5,6,7,8,9,10,11,12,13,14,15. Among different catalysts, Cu nanocubes (CuNCs), synthesized by various approaches, were found to exhibit exceptionally high selectivity for C–C bond formation13,14,15, with this selectivity being size-dependent14. Bi-functionality of {110} edge- and {100} plane- atoms was suggested as the underlying reason of such behavior14. As mentioned, from the perspective of practical implementation, long-term stability is a key parameter beyond activity and selectivity for real-world catalysts1,16,17. Nevertheless, the stability of CO2 reduction catalysts and their degradation mechanism during extended electrolysis has not yet been sufficiently investigated18,19,20.
Here we report the discovery of a potential-induced nanoclustering degradation mechanism in CuNCs during extended electrochemical CO2RR. We investigate the structural evolution of CuNCs with three distinct sizes (i.e., 16 nm, 41 nm, and 65 nm) to correlate with their activity, selectivity and stability. Our results establish that the three sized CuNCs feature uncommon nanoclustering followed by a coalescence process. The state-of-the-art synthesis and characterization are complemented with theoretical investigations which highlight the role of the applied negative potential as the main driving force for the loss of the pristine cubic morphology. Our insights into the degradation mechanism of Cu nanocatalysts offer a unique outlook to study the stability of newly developed CO2RR electrocatalysts and open the way towards defining mitigation strategies to improve this stability.
Results
Morphological evolution during electrolysis
The CuNCs were synthesized by a colloidal chemistry approach (Fig. 1 and Supplementary Fig. 1). This technique was chosen because it allows the exquisite size monodispersity and shape uniformity which is required to unambiguously identify degradation pathways through morphological evolution studies, while possessing the potential to close the gap between fundamental studies and technological implementation thanks to the possibility for scale-up. To investigate their stability, the NCs dispersed in hexane were loaded onto glassy carbon substrates and subjected to electrolysis in 0.1 M KHCO3 at −1.1 V vs. reversible hydrogen electrode (RHE) up to 12 h. The reaction was stopped at different times and the reacted NCs were then collected for transmission electron microscopy (TEM) analysis (see Methods for details). Figure 1a shows typical TEM micrographs of the pristine and reacted 16 nm CuNCs. Strikingly, while cubic contours are still discernable in the first 0.5 h, most CuNCs evolve into smaller and rounded particles due to a rapid detachment of nanoclusters (~3 nm) from the NCs. As the reaction proceeds for 1 h, both the particles and nanoclusters appear to assemble randomly and as a result different sizes and morphologies of aggregates are formed. Some aggregates of small particles exhibit a dendritic morphology, which is usually a result of random collision of particles21. Aggregate formation becomes predominant in the samples examined at the reaction times longer than 3 h. Here, the beads, i.e. the constituents of the aggregates, coalesce with each other to some degree, as is reflected by the larger necking areas of two neighboring ones. Eventually, when the reaction is prolonged to 12 h, the boundaries between beads are no longer clearly seen. Instead, all beads fuse together and tangled and slightly thicker networks are formed. The thicker network is probably caused by the coalescence of nanoclusters together with the beads. When turning to the 41 nm CuNCs, they exhibit a similar pathway but a different evolution rate (Fig. 1b). In the 1 h sample, only a few CuNCs break into nanoclusters. As the reaction unfolds, nanoclustering becomes slightly intensified, which is reflected by several broken cubes in addition to lumps of clusters in the vicinity (Fig. 1b, 3 h sample). Although, the longer reaction time aggravates the degradation, some pristine CuNCs are still observable after the reaction up to 6 h. At this moment, the degraded cubes are also seen to start to coalesce with each other, for which the clusters seem to serve as a binder. In the 12 h sample, all NCs are glued together. Interestingly, 65 nm CuNCs resemble 41 nm CuNCs, exhibiting similar morphological features at various stages, yet such changes are slightly delayed in time (Fig. 1c).
Characterization of the nanoclusters
To gain more insights into the nanoclustering phenomena, we performed detailed aberration-corrected high-resolution TEM characterizations on the clusters (<3 nm) and particles (~5 nm) which form from the coalescence of the former. Figure 2 reports the high-angle annular dark-field scanning TEM (HAADF-STEM) characterization results. As it can be seen from Fig. 2a, when the clusters consist of only a few atoms, they are amorphous. Because of their high mobility, some clusters coalesce into larger particles of ~2–3 nm (Fig. 2b) and of ~5 nm (Fig. 2c–e). The former show a certain degree of short-range ordering while the latter display clear crystalline fringes that contain useful structural information. The fast Fourier transform (FFT) pattern reveals that these particles are pure metallic Cu (Fig. 2f). Selected area electron diffraction (SAED) pattern in TEM mode was further acquired on a more extended area (Supplementary Fig. 2). Interestingly, very weak reflections corresponding to Cu2O were detected; however, this trivial amount of Cu2O was attributed to the native oxidation during the TEM sample preparation. Based on these results and analysis, it is concluded that the clusters are metallic Cu clusters. Advancing one step, one Cu particles of ~5 nm that contains penta-twins was captured (Supplementary Fig. 2c, f). This observation suggests that the ~5 nm particles form from the coalescence of smaller clusters, as penta-twinned particles cannot ‘detach’ directly from the single-crystalline CuNCs.
Impact of the morphological changes on the CO2RR performance
To characterize the impact of structural changes on the electrocatalytic performance, we recorded current density and faradaic efficiency (FE) of CO2RR and of the competing hydrogen evolution reaction (HER), which are two descriptors used for electrocatalytic activity and selectivity, respectively (Fig. 3). The gaseous product distribution for CO2RR is reported in Supplementary Fig. 3. The general trend consisted in an increase of the FE towards HER as the nanocluster population increases, in agreement with previous findings that smaller Cu nanoparticles and nanoclusters with higher number of low-coordination sites favor HER at the expenses of the CO2RR12,14,22. For the 16 nm CuNCs, the intrinsic higher reactivity of such smaller particles and of the clusters, which form from nanoclustering at the beginning of the reaction (within the first 0.5 h, Fig. 1a), resulted in a high starting FE toward HER (0.5 h, Fig. 3a). As the aggregative assembly proceeded in the following 3 h, the current density decreased and the selectivity shifted from HER to CO2RR due to the loss of low-coordinated sites that are active for HER, which is reflected by the progressive decrease in hydrogen evolution accompanied by a steady increase of gaseous products of CO2RR (0.5–3 h, Fig. 3a). The further smoothening of the aggregates in the next 9 h only led to gradually favoring HER over CO2RR (3–12 h, Fig. 3a). Turning to the 41 nm and 65 nm CuNCs, these share similar trends in the FE of HER and CO2RR following their structural evolution: the FEs are stable for the first ~6 h until when HER starts to rise and CO2RR to drop, which happens at a slightly lower rate for the 65 nm compared with the 41 nm (Fig. 3b, c).The plateaus present for both HER and CO2RR indicate the higher structural stability of these bigger sized cubes compared with the 16 nm CuNCs, as the effects of nanoclustering are observed at later reaction times. The effect of nanoclustering and coalescence, both detrimental for CO2RR, becomes evident only after the initial ~6 h, which shifts the selectivity from CO2RR toward HER (6–12 h, Fig. 3b, c). At such a negative potential of −1.1 V vs RHE, the kinetically more favorable HER occurs readily even in the absence of a good catalyst, thus it is not impacted by coalescence as much as CO2RR. The stability of the total current density during the 12 h likely derives from a compensating effect between the increasing HER partial current density and the decreasing CO2RR partial current density. Taken together, these results suggest a strong correlation between the structural evolution and the electrochemical behavior during CO2RR.
It should be noted that the combination of X-Ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Auger spectroscopy (Supplementary Fig. 4) suggests that the CuNCs are only lightly surface oxidized before electrochemistry. Based on recent reports in the literature using O18 labeling techniques and in situ Raman, the native surface oxide is expected to get fully reduced upon the application of the negative potential23,24. While the impact of this change of chemical state on the surface reconstruction cannot be fully excluded, considering the very low surface oxidation of the CuNCs when compared with O2 plasma treated copper9, it is concluded that it has a negligible influence on both the nanoclustering and electrocatalytic performance (Supplementary Fig. 4). Moreover, liquid products were also produced, as reported in Supplementary Fig. 5. Except for formate whose FE is ~10% in the first 1 h, all the other detectable liquid products (i.e. acetate, ethylene glycol, ethanol, 1-propanol) correspond to a FE below 5%. The non-trivial FE of formate in the first 1 h is likely due to the initial surface oxide which has been reported to facilitate the formation of formate25. In addition, ligands are generally believed to lower the activity of catalysts, because they might block active sites, as well as impede electron injection. Herein, Fourier transform infrared spectroscopy (FTIR) and XPS (Supplementary Fig. 6) evidence that the native ligands are stripped off by the very negative potential within the first 1 h of electrolysis, which is consistent with previous findings21. Therefore, the impact of the ligands on the electrochemical performance, if any, is expected to take place only at the beginning of the reaction. As a control experiment, ligand-stripped CuNCs were tested (Supplementary Fig. 7). The only difference compared with the ligand-functionalized CuNCs was a steady value versus a gradual increase of CO2RR FE during the first 1 h of electrolysis (cf. Supplementary Fig. 7 and Fig. 3b). The current was constant in both cases and the FE trends were nearly identical in the following few hours, thus confirming that indeed the native ligands impact the electrochemical performance only at the beginning of the measurements. While the deposition of graphitic carbon has been proposed as possible de-activation mechanism favoring HER over CO2RR26,27, this phenomenon has been observed when methane is the major reduction product26,27, which is not the case of this work (Supplementary Fig. 3). Furthermore, the evident correlation between structural changes and performance suggests that the deposition of graphitic carbon plays a minor role in our system, if any.
Atomic-scale analysis of the structural degradation
Although a clear morphological evolution was observed from the low resolution TEM images (Fig. 1), high resolution TEM (HR-TEM) and electron tomography were key to unravel the degradation pathway of the CuNCs (Fig. 4 and Supplementary Figs 8, 9). The three sized CuNCs have identical major facets (Supplementary Fig. 10). The following analysis focuses on the 41 nm CuNCs because of their ideal ratio between facets that leads to a higher selectivity towards C–C bond formation (Supplementary Fig. 11)14. Firstly, the pristine CuNCs were analyzed by HR-TEM, and the CuNCs were imaged at two different crystallographic directions to determine the crystalline facets exposed on the surface (Fig. 4a, b). In addition to the six {100} facets, the edges were found to consist of {110} facets and small {111} corners. The latter, however, had limited effects on the electrochemical behavior, as it is evidenced by the low FE of CH4 whose formation is usually favored over Cu {111} (Supplementary Fig. 3)28. Figure 4c, Fig. 4d show the CuNCs that were electrolyzed for 1 h and 3 h, respectively, which clearly point out that degradation initiates from the edges of the cubes. The 2D projection nature of these images potentially hides some structural information that can be crucial for understanding the degradation mechanism. We therefore employed HAADF-STEM tomography, which is particularly advantageous for reconstructing 3D crystalline metallic nanostructures. Figure 4e shows the reconstructed tomographic volumes of the pristine and reacted CuNCs at different stages. The reconstructed pristine cube shows a slightly truncated shape (I in Fig. 4e), which matches well the fact that the major facets of the cube are {100} and {110} facets. At the early stage of the electrolysis, the CuNC went through a pitting process, leaving tiny pinholes at edges of the cube (II in Fig. 4e), due to the removal of Cu in the form of nanoclusters as reveled in Fig. 1b. Over time the pinhole at the {100}/{110} interface enlarged its dimensions within the cube by propagating into an adjacent {100} plane and creating a rough surface with more pinholes (III in Fig. 4e). These new pinholes serve as new pitting centers, making the degradation running at multiple spots in parallel (IV in Fig. 4e). As each pitting continues, an irregularly shaped cubic framework with deeper pinholes eventually forms (V in Fig. 4e). A schematic illustration of the initiation, propagation and deepening of the pitting process which results in the nanoclustering is shown in Fig. 4f. Throughout the whole-pitting progress, the edge {110}—to—plane {100} ratio, which accounts for the selectivity toward ethylene14, changes, thus impacting the ethylene FE (Supplementary Fig. 3). The methane FE follows a similar trend of the ethylene FE over time. Nevertheless, linking the selectivity toward methane to the observed structural changes is not trivial due to the small fraction of Cu {111} in the pristine cubes.
Investigation of the parameters driving degradation
It is well known that nanoparticles, because of their highsurface-to-volume ratio, tend to undergo sintering into larger particles to lower the overall surface energy. Ostwald ripening, reprecipitation and coalescence are the most common degradation mechanisms for nanocatalysts1. The first two follow from the catalyst dissolution, as ions go into solution, and then redeposit; the latter requires diffusion of the entire particles. Coalescence of particles into aggregated assembly was eventually observed in the three sized CuNCs and it was always sequential to the nanoclustering process; but it started at different times (after 0.5 h for the 16 nm NCs and after 6 h for the 41 nm and the 65 nm NCs, Fig. 1). Nanoclustering seems to be universal for Cu metal catalysts: it was also observed in 8 nm Cu spheres and 135 nm Cu octahedra by us (Supplementary Fig. 12), and in several-micrometer ultrathin Cu nanowires11 and copper thin films18 by other groups. Dissolution/reprecipitation reaction of the CuNCs could explain the formation of the nanoclusters. However, since the potential applied throughout CO2RR is always below the oxidation potential of the CuNCs, which we measured to be around 0.75 V vs RHE under the CO2RR conditions, dissolution of the CuNCs as Cu ions in solution is unlikely. As a matter of fact, the concentration of Cu ions in the electrolyte before and after electrolysis was within the error range of the quantitative elemental analysis conducted by inductively coupled plasma optical emission spectroscopy. Taking into account that nanoclustering is uncommon for nanoparticles dispersed on solid substrate at room temperature, due to the insufficient thermal energy (~25.7 meV) provided to surpass the cohesive energy of Cu (3.49 eV)29, we believe that the general occurrence of nanoclustering observed for Cu nanocrystals must originate from the CO2RR conditions.
In order to understand the influence of the CO2RR operation conditions on nanoclustering, we examined the effects of the sole CO2 adsorption and of the negative potential by cutting off the voltage supply and the CO2 flow, respectively, while keeping all other conditions identical. Interestingly, significant nanoclustering was observed when the negative voltage was applied, even in the absence of the CO2 flow (Supplementary Fig. 13); thus, these experiments suggested a major role played by the voltage in the degradation of the CuNCs. While nanoclustering has not been studied in nanoparticle electrocatalysts, one recent study on bulk Cu surfaces suggests that the mechanism behind the contribution of CO2 to the nanoclustering may involve the dissociation of CO2 on Cu nanocrystals which releases energy exceeding that required for the breaking of Cu–Cu bonds and consequently leads to the breaking up of the Cu surface into nanoclusters30. On the other hand, it is unexpected to see that such nanoclustering in metallic catalysts is mainly driven by the negative potential. While reduction of the ligands and consequent stripping from the CuNCs surface is induced by the negative potential during electrolysis (Supplementary Fig. 6), we verified that the sole ligand removal is not cause of the degradation; in fact, intact CuNCs and no nanoclustering were observed when the ligands were intentionally removed from the surface by plasma treatment. The impact of ligand removal was mostly on the degradation kinetics during CO2RR as faster morphological and performance changes were observed in the bare CuNCs compared with the pristine ones (Supplementary Fig. 14). Therefore, the negative potential must play other role(s), most likely to do with the stability of the nanocrystals themselves.
In order to gain insight into the driving forces behind the CuNCs degradation under operation conditions, we performed density functional theory (DFT) calculations for bulk copper and (111), (100), and (110) surfaces within a grand canonical approach31, including also the (2 × 1) reconstructed (110) and the (5 × 1) reconstructed (100) surfaces (see Supplementary Methods). Clean, CO-covered, H-covered and mixed H + CO covered surfaces were examined. The CO molecule is an obvious choice to exemplify the C-containing intermediates during the conversion of CO2 to hydrocarbons because it serves as the common intermediate that precedes the formation of almost all the products (e.g., methane, ethylene, ethanol, etc.) and its coupling and/or protonation dictate the selectivity and efficiency of CO2RR3. At the same time, the omnipresence of HER under aqueous conditions, the participation of H- in the CO2RR proton-mediated steps, the stability of the CuH phase in the calculated Pourbaix diagram at the operating potential and pH (Supplementary Fig. 15) and the experimental evidence that HER induces nanoclustering as well (Supplementary Fig. 16) motivated us to consider the effect of proton electrosorption on Cu nanoparticle stability. pH- and potential-dependent interface energies were calculated for clean surfaces as well as for surfaces with different adsorbate configurations (0.25–2.0 monolayer coverages) using a slab approach, representing the water environment through the self-consistent polarizable continuum solvation model (SCCS)32. The methodology and all the detailed results are presented in Supplementary Methods. Herein, we focus the discussion on pH = 7, which is the experimental pH. The interfacial free energies (Supplementary Figs 17-19) and the surface terminations extracted from the Pourbaix diagrams (Supplementary Figs 15, 20) depend non-trivially on the pH and on the RHE scale. Nevertheless, unlike the studies by Kim et al. and Matsushima et al. that have found a cathodic polarization induced reconstruction of polycrystalline copper electrodes in either alkaline or acidic electrolytes19,20, at our operational potential we did not find a strong pH-dependence in the Pourbaix diagrams (Supplementary Fig. 15), which was further corroborated by the control experiments showing nanoclustering as a general phenomenon independent of the pH, and the choice and concentration of electrolytes (Supplementary Fig. 21). Therefore, the following discussion holds as well when assuming higher local pH due to the consumption of protons during the reaction. The interface free energies of (111), (100), and (110) Cu surfaces including the effects of H and CO adsorption are plotted in Fig. 5a, b, respectively. For clean surfaces, the interface energies at the potentials of zero charge (maxima of the dashed lines) are consistent with the well-documented thermodynamic stability γ110 > γ100 > γ111 and the reconstructed surfaces were found less stable than the unreconstructed ones (Supplementary Fig. 17 and Supplementary Table 1). In general, pristine bulk Cu surfaces are stable for potentials more positive than 0.1 V (blue arrows in Fig. 5a, b). More negative potentials induce H/CO adsorption (regions highlighted in green/yellow, and Supplementary Fig. 20), which in turn drives the electron transfer from the electrode toward the electrochemical interface built-up by the adsorbing species, and as a result, a strong reduction of interface free energies for fully covered surfaces (red arrows in Fig. 5a, b and Supplementary Fig. 19). The relative stability of the different facets changes for lower potentials in the presence of adsorbates to γ100 > γ110 > γ111 (Fig. 5a). For both adsorbates interface energies become negative between −0.4 and −0.5 V vs RHE @ pH = 7, except for H on Cu(100) (−0.68 V). Negative interface energies represent a strong driving force for CuNCs degradation by supporting the increase of absolute (111), (110), and (100) surface areas. In addition, for the pristine (110) surfaces, we found the unreconstructed surface more stable than the (2 × 1) reconstructed surface. Instead, upon hydrogen adsorption of up to 0.75 of one monolayer the reconstructed surface becomes clearly more stable due to strong adsorption at the step edges. This is in line with the general trend of higher reactivity of lower coordinated sites and the experimentally observed CuNC degradation starting from the edges. We also derived the potential- and pH-dependent Wulff-shapes from the interface free energies including H, CO and co-adsorbed H + CO terminations (Fig. 5c), we find that the cubicity of the polyhedron defined by (100), (110), and (111) facets under realistic CO2RR conditions decreases as the potential decreases. In other words, more negative potentials tend to stabilize non-cubic particles due to smaller interface energies for adsorbate-covered (111) and (110) Cu surfaces. The potential-driven degradation of the cubic morphology was corroborated by a control experiment in which a negative potential was directly applied to CuNCs deposited on a TEM grid (Supplementary Fig. 22). Furthermore, if it is true that the CuNCs undergo a potential-driven degradation, the CuNCs should be more stable at more positive voltages with other conditions unchanged. When the electrolysis was conducted at more positive voltages (−0.7 V and −0.3 V vs. RHE), the CuNCs indeed almost fully preserved their shapes and were isolated from each other (Supplementary Fig. 23), demonstrating the effectiveness of increasing potential as a mitigation strategy to impede nanoscale structural changes.
Discussion
The combination of electron microscopy characterization, product analysis and theoretical calculations provide the whole picture on the degradation mechanism of Cu nanocubes electrocatalysts during CO2RR, which is depicted in Fig. 6. The first stage is nanoclustering (Stage I). Our theory points out that the adsorption of either H- or CO- species on the crystal surface eventually induces degradation of the crystals under a sufficiently negative potential. Higher catalytic activity implies higher adsorbate coverage thus faster degradation. The 16 nm CuNCs are much more reactive and selective for HER than bigger particles, which accounts for the rapid nanoclustering observed in the 16 nm CuNCs. For the 41 nm CuNCs, the nanoclustering starts at the intersection between the {110} and the {100} facets, previously identified as the catalytic sites favoring CO2RR over HER14. This leads to the assumption that CO-adsorbates combined with the negative potential are driving the degradation. The newly formed surface of the pinholes forming from the nanoclustering event possesses a higher number of low-coordinated sites, which are more catalytically active. Thus, the pinhole rapidly enlarges its dimensions within the cube and creates a rough surface with even more pinholes. The 65 nm CuNCs exhibit a lower reactivity than the 16 nm CuNCs and a poorer selectivity towards CO2RR than the 41 nm CuNCs. This is likely the reason why they show a relatively slower nanoclustering process. As the nanoclustering continues, coalescence between the clusters and the degraded CuNCs starts (Stage II). The simultaneous phenomena of the reduction in size of the CuNCs, the increased cluster population and the ligand removal over time induce the formation of aggregated assemblies. A similar formation of aggregated assemblies during CO2RR had been already observed for 4 nm Au nanoparticles, which were also ligand-stripped during electrolysis21. These results indicate that the transport of entire particles more likely happens in small particles, which is reasonable considering that as the size drops the tendency to sintering to minimize surface energy and the mobility of the nanoparticles increase33. This explains the earlier temporal threshold for coalescence observed in the 16 nm NCs.
In summary, we have revealed an unusual nanoclustering degradation mechanism for nanoparticle electrocatalysts by monitoring the structural changes and catalytic behavior of three different sized CuNCs (16 nm, 41 nm, and 65 nm) over 12 h of electrolysis for CO2RR. The CO2 adsorption and the negative potentials were identified as the parameters accounting for the nanoclustering, with the latter outweighing the former. State-of-the-art grand canonical DFT calculations provided a confirmation of the role played by the negative potential as the main driving force of the observed morphological changes. By delivering a comprehensive understanding of the degradation mechanism, this study informs strategies for preserving Cu electrocatalyst nanostructures in order to maintain the electrochemical performance during CO2RR. From a mechanistic perspective, it motivates future research involving the introduction of suitable promoters (metal oxides, ligands, or another metal) that can reduce the overpotential of Cu electrocatalysts toward CO2RR through mutual interaction at the interface. From a practical perspective, wrapping the catalysts with a thin, porous, and conductive material, such as a graphene oxide11, can offer a good solution by physically impeding the detachment of clusters from the catalyst while still preserves the necessary conductivity and CO2 accessibility to the active sites. The extension of our study to different metallic nanoparticle electrocatalysts (e.g., Ag, Pd) proves the generality of the conclusions described here (Supplementary Fig. 24). Thus, our work opens new venues toward the understanding of the degradation reaction mechanisms of new electrocatalysts for CO2 reduction or other electroreduction reaction (e.g., nitrogen electroreduction), which will most likely differ from the more studied oxygen reduction and evolution catalysts1,16,17,34.
Methods
Synthesis of the CuNCs
CuNCs were synthesized following modified procedures introduced in our previous work14. Specifically, to synthesize 41 nm CuNCs, trioctylphosphine oxide (TOPO, 8 mmol) was first mixed with oleylamine (35 mL) in a three-necked flask under a magnetic stirring at room temperature (RT), followed by a pump vacuum for 20 min. CuBr (1.5 mmol) was then quickly added into the mixture under a protective atmosphere of N2, followed with a heating of the mixture at 80 °C for 15 min. After that, the resulting solution was rapidly heated up to 260 °C and kept refluxed at this temperature for 20 min before being cooled down to RT naturally. To synthesize 65 nm CuNCs, the same procedure for 41 nm CuNCs was followed, with the exception that the reflux time was prolonged to 2 h. The synthesis of 16 nm CuNCs also followed the similar procedure for 41 nm CuNCs, with two modifications: (1) the quantity of TOPO and oleylamine was increased to 12.5 mmol and reduced to 20 mL, respectively; (2) the reflux temperature and time were lowered and prolonged to 230 °C and 40 min, respectively. The obtained CuNCs were washed by adding a mixture of hexane and ethanol in the final reaction solution, followed with centrifugation at 5000 rpm for 5 min. Finally, the CuNCs were stored in toluene for further usage. Additional information of chemicals used in the synthesis, and synthesis of Ag nanocubes, Pd nanocubes, Cu octahedrons, and Cu nanospheres are reported in Supplementary Methods.
Characterization methods
TEM images were acquired on FEI Tecnai-Spirit (at 120 kV) and Tecnai-Osiris (at 200 kV). HR-TEM, HR-STEM, and tomographic data were acquired on a FEI Titan Themis 60–300 operated at 300 kV. For tomography, a tilt-series of HAADF images (collection angle, 100–200 mrad) were collected over an angular range of −74° to +74° in 2° increments, using an incident beam of 10 mrad convergence semi-angle. The tilt-series images were aligned and a SIRT reconstruction (30 iterations) performed using FEI Inspect 3D software. The tomogram volume rendering and segmentation were done using Avizo software. XPS data were collected on a PHI VersaProbe II scanning XPS microprobe (Physical Instruments AG, Germany) with a monochromatic Al-Kα X-ray source operating at 24.8 W under ultrahigh vacuum conditions. XRD measurements were conducted on a BRUKER D8 Advance instrument with Cu Kα radiation. FTIR analysis was performed on PerkinElmer Spectrum Two.
Electrocatalytic measurements
Electrocatalytic measurements were performed with a potentiostat (Biologic SP-300) in a custom-built gas-tight three-electrode cell. Typically, working electrodes were prepared by evaporating 15 µL hexane containing different amounts of CuNCs (16 nm: 22.6 µg, 41 nm: 14 µg, 65 nm: 38.6 µg) within a circular area of 1.39 ± 0.13 cm2 on the glassy carbon substrates. Here, the loading amounts were chosen to yield approximately the same current density for the three sized CuNCs and a uniform sub-monolayer of particles on the substrate, rather than to optimize the Faradaic efficiency (Supplementary Fig. 25). Before measurements, the electrodes were carefully flushed with ethanol and then dried with a N2 flow. The working electrodes were then held at a constant bias of −1.7 V vs. Ag/AgCl using chronoamperometry for a set time of up to 12 h. The potential was chosen based on our previous potential-dependent studies, revealing that at such negative potential the hydrogen evolution reaction is less favorable14. The solution resistance was determined and compensated using the in-built MIR function of the potentiostat, compensating for 85% of the resistance. During electrolysis, CO2 was constantly bubbled through the electrolyte at a flow rate of 5 sccm to prevent depletion of CO2 in the electrolyte and to allow continuous analysis of gaseous products via a GC. The flow rate of CO2 was controlled with a mass flow controller (Bronkhorst). During electrolysis, the CO2 with gaseous products was allowed to flow directly into the gas sampling loop of the GC for online gaseous product analysis, which took ~10.5 min for each run of analysis. After electrolysis, the liquid products were collected from both the cathode and the anode chamber and analyzed by the high-performance liquid chromatography (HPLC). More details on the measurements are provided in Supplementary Methods.
For TEM imaging, a TEM grid with a drop of hexane atop was placed on the glassy carbon to collect the reacted nanoparticles after electrolysis. Such a transfer of particles from glassy carbon substrates to TEM grids does not affect the particle shape and splitting, as it was demonstrated by a control experiment in which CuNCs transferred from the glassy carbon were found to be identical to those directly deposited on the TEM grid (Supplementary Fig. 26).
Theoretical calculations
The thermodynamic stability of bulk Cu and Cu-water interfaces was analysed by determining the theoretical Pourbaix diagram and grand canonical interface energies from density functional theory calculations, using Quantum ESPRESSO35 with pseudopotentials from the SSSP library36. Interface free energies were determined using a constant Fermi level approach with the water environment represented by the self-consistent continuum solvation model (SCCS)32, as implemented in ENVIRON. A schematic of the computational setup and a summary of the considered Cu surfaces are present in Supplementary Fig. 27 and Supplementary Table 2, respectively. The detailed methodology is described in Supplementary Methods.
Data availability
The authors declare that the main data supporting the findings of this study are available within the article and its Supplementary Information files. All DFT calculations were performed with the open source code ‘Quantum ESPRESSO’ and the module ‘ENVIRON’. All calculations were managed by the AiiDA python framework (www.aiida.net) which allows to manage and store all calculations and related results in an acyclic graph database enabling long-term storage of full data provenance. The authors declare that all relevant data are available from the authors upon reasonable request.
References
Spori, C., Kwan, J. T. H., Bonakdarpour, A., Wilkinson, D. P. & Strasser, P. The stability challenges of oxygen evolving catalysts: towards a common fundamental understanding and mitigation of catalyst degradation. Angew. Chem. Int. Ed. 56, 5994–6021 (2017).
Kondratenko, E. V., Mul, G., Baltrusaitis, J., Larrazábal, G. O. & Pérez-Ramírez, J. Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes. Energy Environ. Sci. 6, 3112 (2013).
Peterson, A. A., Abild-Pedersen, F., Studt, F., Rossmeisl, J. & Nørskov, J. K. How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels. Energy Environ. Sci. 3, 1311 (2010).
Kuhl, K. P. et al. Electrocatalytic conversion of carbon dioxide to methane and methanol on transition metal surfaces. J. Am. Chem. Soc. 136, 14107–14113 (2014).
Perez-Gallent, E., Figueiredo, M. C., Calle-Vallejo, F. & Koper, M. T. Spectroscopic observation of a hydrogenated CO dimer intermediate during CO reduction on Cu(100) electrodes. Angew. Chem. Int. Ed. 56, 3621–3624 (2017).
Liu, M. et al. Enhanced electrocatalytic CO2 reduction via field-induced reagent concentration. Nature 537, 382 (2016).
Kim, D., Resasco, J., Yu, Y., Asiri, A. M. & Yang, P. Synergistic geometric and electronic effects for electrochemical reduction of carbon dioxide using gold-copper bimetallic nanoparticles. Nat. Commun. 5, 4948 (2014).
Li, C. W., Ciston, J. & Kanan, M. W. Electroreduction of carbon monoxide to liquid fuel on oxide-derived nanocrystalline copper. Nature 508, 504 (2014).
Mistry, H. et al. Highly selective plasma-activated copper catalysts for carbon dioxide reduction to ethylene. Nat. Commun. 7, 12123 (2016).
Ma, M., Djanashvili, K. & Smith, W. A. Controllable hydrocarbon formation from the electrochemical reduction of CO2 over Cu nanowire arrays. Angew. Chem. Int. Ed. 55, 6680–6684 (2016).
Li, Y. et al. Structure-sensitive CO2 electroreduction to hydrocarbons on ultrathin 5-fold twinned copper nanowires. Nano. Lett. 17, 1312–1317 (2017).
Reske, R., Mistry, H., Behafarid, F., Roldan Cuenya, B. & Strasser, P. Particle size effects in the catalytic electroreduction of CO(2) on Cu nanoparticles. J. Am. Chem. Soc. 136, 6978–6986 (2014).
Roberts, F. S., Kuhl, K. P. & Nilsson, A. High selectivity for ethylene from carbon dioxide reduction over copper nanocube electrocatalysts. Angew. Chem. Int. Ed. 54, 5179–5182 (2015).
Loiudice, A. et al. Tailoring copper nanocrystals towards C2 products in electrochemical CO2 reduction. Angew. Chem. Int. Ed. 55, 5789–5792 (2016).
Gao, D. et al. Plasma-activated copper nanocube catalysts for efficient carbon dioxide electroreduction to hydrocarbons and alcohols. ACS Nano 11, 4825–4831 (2017).
Niu, Z. et al. Anisotropic phase segregation and migration of Pt in nanocrystals en route to nanoframe catalysts. Nat. Mater. 15, 1188–1194 (2016).
Cui, C., Gan, L., Heggen, M., Rudi, S. & Strasser, P. Compositional segregation in shaped Pt alloy nanoparticles and their structural behaviour during electrocatalysis. Nat. Mater. 12, 765–771 (2013).
Gunathunge, C. M. et al. Spectroscopic observation of reversible surface reconstruction of copper electrodes under CO2 reduction. J. Phys. Chem. C 121, 12337–12344 (2017).
Kim, Y. G., Baricuatro, J. H., Javier, A., Gregoire, J. M. & Soriaga, M. P. The evolution of the polycrystalline copper surface, first to Cu(111) and then to Cu(100), at a fixed CO(2)RR potential: a study by operando EC-STM. Langmuir 30, 15053–15056 (2014).
Matsushima, H., Taranovskyy, A., Haak, C., Grunder, Y. & Magnussen, O. M. Reconstruction of Cu(100) electrode surfaces during hydrogen evolution. J. Am. Chem. Soc. 131, 10362–10363 (2009).
Manthiram, K., Surendranath, Y. & Alivisatos, A. P. Dendritic assembly of gold nanoparticles during fuel-forming electrocatalysis. J. Am. Chem. Soc. 136, 7237–7240 (2014).
Tang, Q. et al. Lattice-hydride mechanism in electrocatalytic CO2 reduction by structurally precise copper-hydride nanoclusters. J. Am. Chem. Soc. 139, 9728–9736 (2017).
Lum, Y. & Ager, J. W. Stability of residual oxides in oxide-derived copper catalysts for electrochemical CO2 reduction investigated with (18) O labeling. Angew. Chem. Int. Ed. 57, 551–554 (2018).
Ren, D. et al. Selective electrochemical reduction of carbon dioxide to ethylene and ethanol on copper(I) oxide catalysts. ACS Catal. 5, 2814–2821 (2015).
Li, C. W. & Kanan, M. W. CO2 reduction at low overpotential on Cu electrodes resulting from the reduction of thick Cu2O films. J. Am. Chem. Soc. 134, 7231–7234 (2012).
Weng, Z. et al. Self-cleaning catalyst electrodes for stabilized CO2 reduction to hydrocarbons. Angew. Chem. Int. Ed. 56, 13135–13139 (2017).
Kas, R., Kortlever, R., Yılmaz, H., Koper, M. T. M. & Mul, G. Manipulating the hydrocarbon selectivity of copper nanoparticles in CO2 electroreduction by process conditions. Chem. Electro Chem. 2, 354–358 (2015).
Schouten, K. J. P., Gallent, E. P. & Koper, M. T. M. Structure sensitivity of the electrochemical reduction of carbon monoxide on copper single crystals. ACS Catal. 3, 1292–1295 (2013).
Kittel, C. Introduction to Solid State Physics. 8th edition, (John Wiley & Sons, Inc, Hoboken, NJ, 2005).
Eren, B., Weatherup, R. S., Liakakos, N., Somorjai, G. A. & Salmeron, M. Dissociative carbon dioxide adsorption and morphological changes on Cu(100) and Cu(111) at ambient pressures. J. Am. Chem. Soc. 138, 8207–8211 (2016).
Bonnet, N. & Marzari, N. First-principles prediction of the equilibrium shape of nanoparticles under realistic electrochemical conditions. Phys. Rev. Lett. 110, 086104 (2013).
Andreussi, O., Dabo, I. & Marzari, N. Revised self-consistent continuum solvation in electronic-structure calculations. J. Chem. Phys. 136, 064102 (2012).
Goudeli, E. & Pratsinis, S. E. Crystallinity dynamics of gold nanoparticles during sintering or coalescence. AlChE J. 62, 589–598 (2016).
Fabbri, E. et al. Dynamic surface self-reconstruction is the key of highly active perovskite nano-electrocatalysts for water splitting. Nat. Mater. 16, 925–931 (2017).
Giannozzi, P. et al. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter 21, 395502 (2009).
Lejaeghere, K. et al. Reproducibility in density functional theory calculations of solids. Science 351, 1415 (2016).
Acknowledgements
This work was supported by the National Center of Competence in Research (NCCR) Marvel funded by the Swiss National Science Foundation and by the European Research Council under grant ERC-HYCAT with grant agreement number 715634 and by the École Polytechnique Fédérale de Lausanne. A.L. acknowledges the H2020-Marie Curie Individual Fellowship with grant agreement number 701745. Dr. Anna Carlson of FEI is acknowledged for the help with electron tomography experiments. Mr. Pranit Iyengar is acknowledged for supplying the sample of Cu octahedrons. Dr. Mounir Mensi is acknowledged for the acquisition of the XPS spectra.
Author information
Authors and Affiliations
Contributions
J.H. and R.B. conceived and designed the experiments. J.H. carried out the chemical synthesis and the electrochemical experiments and analysed the results. J.H. and E.O. performed the HR-TEM and tomography experiments. A.L. contributed to the chemical synthesis and electrochemical measurements. G.L.D.G. optimized the electrochemical and product analysis setups. N.H., O.A. and N.M. developed the methodology and performed the grand canonical DFT calculations. J.H. and R.B. assembled the figures and co-wrote the manuscript. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Huang, J., Hörmann, N., Oveisi, E. et al. Potential-induced nanoclustering of metallic catalysts during electrochemical CO2 reduction. Nat Commun 9, 3117 (2018). https://doi.org/10.1038/s41467-018-05544-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-018-05544-3
This article is cited by
-
Alkali cation-induced cathodic corrosion in Cu electrocatalysts
Nature Communications (2024)
-
Turning copper into an efficient and stable CO evolution catalyst beyond noble metals
Nature Communications (2024)
-
Exploring mesoscopic mass transport effects on electrocatalytic selectivity
Nature Catalysis (2024)
-
Solution-based Cu+ transient species mediate the reconstruction of copper electrocatalysts for CO2 reduction
Nature Catalysis (2024)
-
Impact of palladium/palladium hydride conversion on electrochemical CO2 reduction via in-situ transmission electron microscopy and diffraction
Nature Communications (2024)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.