Valine–citrulline linkers are commonly used as enzymatically cleavable linkers for antibody–drug conjugates. While stable in human plasma, these linkers are unstable in mouse plasma due to susceptibility to an extracellular carboxylesterase. This instability often triggers premature release of drugs in mouse circulation, presenting a molecular design challenge. Here, we report that an antibody–drug conjugate with glutamic acid–valine–citrulline linkers is responsive to enzymatic drug release but undergoes almost no premature cleavage in mice. We demonstrate that this construct exhibits greater treatment efficacy in mouse tumor models than does a valine–citrulline-based variant. Notably, our antibody–drug conjugate contains long spacers facilitating the protease access to the linker moiety, indicating that our linker assures high in vivo stability despite a high degree of exposure. This technology could add flexibility to antibody–drug conjugate design and help minimize failure rates in pre-clinical studies caused by linker instability.
Antibody–drug conjugates (ADCs) are an emerging class of chemotherapy agents with the potential to revolutionize current treatment strategies and regimens for cancers1,2,3,4. Indeed, the clinical success of ADCs has been demonstrated with FDA-approved ADCs for the treatment of patients with Hodgkin lymphoma (Adcetris®)5, 6, HER2-positive breast cancer (Kadcyla®)7, 8, acute lymphoblastic lymphoma (Besponsa®)9, and acute myeloid lymphoma (Mylotarg®)10 and more than 60 promising ADCs in clinical trials11, 12. The striking success has driven scientists and clinicians to further advance this molecular platform for developing effective therapeutics for cancers, microbial infection13, and immune modulation14.
ADCs consist of potent drugs (payloads) linked to therapeutic monoclonal antibodies (mAbs) through chemical linkers. This molecular format enables pinpoint delivery of highly cytotoxic payloads to target tumor cells, resulting in greater potency, a broader therapeutic window, and more durable treatment effect than are possible with traditional chemotherapy agents alone15, 16. In addition to the choice of the antibody and payload, the ADC linker structure and antibody–payload conjugation modality impact ADC homogeneity, cytotoxic potency, tolerability, and pharmacokinetics (PK). These key parameters critically contribute to overall in vivo therapeutic efficacy17,18,19,20. Thus, refining linker and conjugation chemistries is of crucial importance for optimizing the therapeutic potential and safety profiles of ADCs.
Valine–citrulline (VCit) dipeptide linkers connecting a payload with a p-aminobenzyloxycarbonyl (PABC) group are standard cleavable linkers widely used in many successful ADCs including the FDA-approved ADC Adcetris21, 22. VCit linkers are cleaved by cathepsins upon internalization of ADCs by target cancer cells, resulting in traceless release of payloads (Fig. 1a)17. VCit linkers are stable in cynomolgus monkey and human plasma. However, it has been reported that these linkers can be hydrolyzed in mouse plasma. The extracellular carboxylesterase 1c (Ces1c) has been reported as the enzyme responsible for this hydrolysis, which can result in premature release of toxic payloads in circulation prior to reaching tumors23. One approach to circumvent this problem is to use Ces1c-knockout mice (available from The Jackson Laboratory) or cross the Ces1c null alleles onto an immunocompromised mouse model. However, the use of such genetically engineered mice may hamper smooth implementation of in vivo studies because of long lead time and limited choice of parent genetic background. The linker instability in mouse plasma can also be ameliorated by carefully selecting the linker attachment sites within an antibody and limiting the length of the VCit linker to minimize the exposure of the vulnerable moiety to extracellular enzymes, as demonstrated with several VCit-based ADCs23,24,25. However, it has also been confirmed that installation of VCit linkers at exposed conjugation sites and extending the linker structure result in rapid loss of payload in circulation23, 25,26,27,28. Almost all initial preclinical studies in drug development are performed using mouse models. Therefore, the instability creates an obstacle for evaluation of the therapeutic potential and safety profiles of VCit-based ADCs. In addition, this issue significantly limits flexibility in the choice of conjugation sites and linker design. Indeed, ADCs constructed using the multi-loading VCit linker recently developed by our group29 were shown to have instability in mouse plasma and poor treatment efficacy in mouse breast tumor models (described in detail in the Results section).
Herein, we demonstrate that a glutamic acid–valine–citrulline (EVCit) tripeptide sequence provides exceptionally high long-term stability in mouse and human plasma while retaining the capacity to release the free payload upon cathepsin-mediated cleavage (Fig. 1a). We also demonstrate that an ADC constructed using the acidic EVCit linker exhibits by far greater in vivo stability and antitumor efficacy in xenograft mouse models bearing human breast cancer than does a VCit-based variant. Our findings indicate that the use of the EVCit linker system could minimize failure rates in preclinical studies using mouse models caused by linker instability, significantly expanding flexibility in designing ADCs. This technology may also provide a broadly applicable solution for enhancing stability and efficacy of other molecular classes of drug conjugates for targeted therapy.
In vitro evaluation of cleavable tripeptide probes
It has been reported that introducing a chemical modification to the N-terminus of the valine residue (P3 position, Fig. 1a) significantly affects the plasma stability of VCit linker-based ADCs23. The authors demonstrated that VCit linkers with a hydrophilic group, such as 2-hydroxyacetamide group, at the P3 position increased ADC stability in mouse plasma without impairing the reactivity to intracellular cathepsin B-mediated cleavage. Based on their findings, we speculated that installation of a highly polar functional group at the P3 position could further enhance resistance to Ces1c-mediated degradation.
To test this hypothesis, we set out to assess a panel of peptide probes containing various amino acids at the P3 position selected to confer plasma stability (Fig. 1b). We first synthesized VCit- and tripeptide probes 1a–f by standard solid- and liquid-phase peptide synthesis and following carbamate formation (Supplementary Fig. 1). These model probes consisted of a XVCit–PABC unit where X is no amino acid (1a), serine (1b), glutamic acid (1c), aspartic acid (1d), lysine (1e), and hydroxyacetyl glycine (1f). Based on a report by Dorywalska and co-workers23, we expected that probes 1b, f would serve as mimics of the hydroxy-functionalized tripeptide ADC linker with increased mouse plasma stability. In particular, the 2-hydroxyacetamide group within probe 1f is the modifier that provided the greatest stability in their report. Thus, we expected that comparing peptide sequences of interest with probe 1f would clearly demonstrate the degree of improvement over the previous linker design. These linkers were covalently linked to 1-pyrenemethylamine, a surrogate of hydrophobic payloads with distinct UV absorbance at 342 nm30. Subsequently, probes 1a–f were incubated in undiluted BALB/c plasma at 37 °C and the amount of each probe was monitored by HPLC (Fig. 1c). As anticipated, VCit probe 1a exhibited a very short half-life (t1/2 = 2.3 h). SVCit probe 1b was slightly more stable (t1/2 = 3.1 h) than VCit probe 1a. However, the increase in stability was not as significant as what had been anticipated based on the previous report on the hydroxy-functionalized stable linker23. Intriguingly, acidic EVCit and DVCit probes 1c, d showed greatly extended half-lives (t1/2 = 19.1 h and 14.0 h, respectively). The difference between these values is statistically significant as analyzed using GraphPad Prism 7, indicating that EVCit is superior to DVCit in terms of stability in mouse plasma. In contrast, basic KVCit probe 1e showed the shortest half-life of all probes (t1/2 = 0.9 h). These results indicate that an acidic side chain at the P3 position can effectively repel access of Ces1c, inhibiting the cleavage reaction. Probes 1a–e tested were stable in human plasma and no significant degradation was observed after 2 days (Supplementary Fig. 2a). Given this point, the accelerated degradation seen for KVCit probe 1e in mouse plasma may indicate that a basic side chain at the P3 position provides an additional interaction with Ces1c, leading to fast bond cleavage. 2-Hydroxyacetamide probe 1f was slightly more stable (t1/2 = 5.0 h) than SVCit probe 1b but much less stable than EVCit and DVCit probes 1c, d. Thus, the stabilizing effect of a neutral carbonyl group at the P3 position was not as significant as that of a negatively charged carboxylic acid side chain.
Next, we tested probes 1a–e for responsiveness to human cathepsin B-mediated cleavage (Supplementary Fig. 2b). SVCit probe 1b showed a cleavage rate comparable with that of VCit probe 1a. In contrast, we observed faster bond cleavage in EVCit, DVCit, and KVCit probes 1c–e than in VCit and SVCit probes 1a, b. These results demonstrated at the small-molecule level that the acidic EVCit and DVCit linker systems provided significantly enhanced stability in mouse plasma without impairing cathepsin B-mediated payload release.
Construction and characterization of homogeneous ADCs
To investigate whether the above-mentioned observation exists in the ADC format, we evaluated ADCs constructed using VCit-, SVCit-, and EVCit-based cleavable linkers. We first attached branched linker 2 (see Supplementary Fig. 3 for synthesis details) to an anti-HER2 mAb at glutamine 295 (Q295) by microbial transglutaminase (MTGase)-mediated conjugation according to the protocol developed by our group with minor modifications (Fig. 2a)29. The anti-HER2 mAb used for linker conjugation contained a mutation of the asparagine 297 into alanine (N297A)31. This mutation allows omission of removal of the N-glycan chain on N297, a step required for MTGase-mediated antibody–linker conjugation32. The conjugation afforded a homogeneous mAb–branched linker conjugate in high yield (Fig. 2b). In parallel, we synthesized SVCit- and EVCit-based modules containing monomethyl auristatin F (MMAF), polyethylene glycol (PEG) spacer, and dibenzocyclooctyne (DBCO) as a reaction handle for following strain-promoted azide–alkyne click reaction (Supplementary Fig. 4). A DBCO–VCit module was obtained from a commercial source. The number of PEG units in each module was adjusted so that all payload modules had a similar length (PEG4 for the dipeptide VCit and PEG3 for the tripeptides SVCit and EVCit). Each clickable module could be quantitatively conjugated to the common mAb–branched linker conjugate to give highly homogeneous ADCs with an average drug-to-antibody ratio (DAR) of 3.9 (determined by reverse-phase HPLC, Supplementary Fig. 5). We also prepared non-cleavable branched ADC 4 (DAR: 3.9) and an isotype control constructed using the EVCit–MMAF module (5, DAR: 3.9) in the same manner (Supplementary Fig. 6). Size-exclusion chromatography (SEC) analysis revealed that all ADCs produced existed predominantly in the monomer form (Fig. 2c). We also evaluated long-term stability by incubating each ADC at 37 °C in PBS (pH 7.4) for 28 days. No significant degradation or aggregation was observed by SEC analysis (Supplementary Fig. 7).
To assess how a chemical modification at the P3 modification influences ADC hydrophobicity, we performed hydrophobic interaction chromatography (HIC) analysis under physiological conditions (phosphate buffer at pH 7.4, Fig. 2d). Highly polar EVCit ADC 3c was detected earlier in retention time than VCit ADC 3a, whereas the hydroxy group within SVCit ADC 3b marginally affected the ADC hydrophobicity (Fig. 2e). These results demonstrate that constructing ADCs using carboxy-functionalized EVCit linkers can reduce ADC hydrophobicity at physiological pH. This feature is advantageous for the construction of ADCs, especially high-DAR ADCs, because high ADC hydrophobicity is known to trigger aggregation and fast clearance from the body33.
Validation of ADCs in vitro
To investigate how ADC in vitro properties are modulated by a chemical modification to the P3 position, we first evaluated ADCs 3a–c for cathepsin B-mediated cleavage. Each ADC was incubated in the presence of human liver cathepsin B at 37 °C. The half-lives of VCit ADC 3a, SVCit ADC 3b, and EVCit ADC 3c were determined to be 4.6 h, 5.4 h, and 2.8 h, respectively (Supplementary Fig. 8). This result illustrates that EVCit linkers conjugated to a mAb are more sensitive to cathepsin B-mediated cleavage than VCit and SVCit linkers, which is consistent with the responsiveness of pyrene probes 1a–c (Supplementary Fig. 2b). The ADCs were also tested for responsiveness to cathepsins L and S, which are also responsible for lysosomal cleavage of VCit linkers34 (Supplementary Table 1). Interestingly, VCit ADC 3a was slightly more sensitive to cathepsin L-mediated cleavage than EVCit 3c. Cathepsin S cleaved both linker systems at similar rates. In addition, both sequences were cleaved at almost equivalent rates in a mixture of cathepsins B, L, and S. Thus, while highly responsive to cathepsin B-mediated cleavage, EVCit was not necessarily more sensitive than VCit to cleavage by other cathepsins.
Next, we assessed the ADCs for stability in human and mouse plasma. No significant degradation was observed in any of the ADCs after incubation in human plasma at 37 °C for 28 days (Fig. 3a). In contrast, although EVCit ADC 3c showed almost no linker cleavage even after 14-day incubation in undiluted BALB/c mouse plasma, VCit and SVCit ADCs 3a, b lost > 95% and ~70% of the conjugated MMAF after the same period of time (Fig. 3b and Supplementary Fig. 9). This tendency is consistent with what we observed in the small-molecule probes (Fig. 1c). The PEG spacer within the linker scaffold most likely facilitates the enzyme access to the linker–payload moiety. Considering this point, our results indicate that the acidic EVCit linker provides not only reactivity to cathepsin-mediated cleavage but also high stability in plasma despite a high degree of payload exposure.
Subsequently, we tested the anti-HER2 ADCs for antigen binding affinity and specificity using the human breast cancer cell lines KPL-4 (HER2 positive) and MDA-MB-231 (HER2 negative) (Supplementary Fig. 10 and Supplementary Table 2). Like the parental anti-HER2 mAb, ADCs 3a–c showed high binding affinity to KPL-4 (KD: 0.12–0.16 nM) but not to MDA-MB-231. Non-targeting control 5 showed no binding to either cell line. These results indicate that installation of glutamic acid or serine at the P3 position is unlikely to drastically influence the antigen recognition and specificity. We also evaluated these ADCs for in vitro cytotoxicity using HER2 positive- (KPL-4, JIMT-1, BT-474, and SKBR-3) and negative (MDA-MB-231) breast cancer cell lines (Fig. 3c–e, Supplementary Fig. 11, and Supplementary Tables 3, 4). Cathepsin-cleavable ADCs 3a–c exhibited subnanomolar-level cell killing potency in the HER2-positive cell lines, but no cytotoxicity in HER2-negative MDA-MB-231 under our assay conditions. We did not observe significant difference in cell killing potency among the three cleavable ADCs (ranges of the EC50 values in KPL-4: 0.10–0.12 nM; in JIMT-1: 0.078–0.10 nM; in BT-474: 0.058–0.063 nM; and in SKBR-3: 0.27–0.34 nM, Supplementary Table 3). Given that multiple proteases including cathepsins are most likely responsible for lysosomal processing of VCit-type linkers34, there might be no distinct difference in the rate of lysosomal cleavage between the VCit and EVCit sequences. This speculation is also supported by our observation that both VCit and EVCit linkers were processed at almost equal rates in the presence of multiple cathepsins (Supplementary Table 1). However, non-cleavable ADC 4, which lacks a cathepsin-cleavable sequence within the linker scaffold, showed 1.8–4.2-fold higher EC50 values than those of cleavable ADC 3a (Fig. 3c, d, Supplementary Fig. 11, and Supplementary Table 3). These results suggest that existence of a cleavage mechanism is a key to maximize cell killing potency of ADCs constructed using our branched linker platform.
Validation of ADCs in vivo
Finally, we evaluated the ADCs in vivo using mouse models. We first assessed PK profiles of VCit, SVCit, and EVCit ADCs 3a–c using BALB/c mice. Mice were treated with intravenous injection of each ADC or the parental N297A anti-HER2 mAb (3 mg kg–1). Blood was collected periodically via the tail vein. Concentrations of total mAb (both conjugated and unconjugated) and intact ADC (conjugated only) in blood were determined by sandwich enzyme-linked immunosorbent assay (ELISA, Fig. 4a, b, Supplementary Fig. 12, and Supplementary Table 5). All ADCs showed similar clearance rates as that of the parental mAb (t1/2β = 14.9 days), indicating that installing glutamic acid or serine at the P3 position did not negatively impact the clearance profile (Fig. 4a). As expected, EVCit ADC 3c showed no significant loss of payload caused by cleavage in circulation (t1/2β = 12.0 days). In contrast, VCit and SVCit ADCs 3a, b quickly lost MMAF (t1/2β = 2.0 days and 2.4 days, respectively), demonstrating that the VCit and SVCit sequences installed on the mAb–branched linker system were unstable in circulation.
Encouraged by this finding, we tested VCit and EVCit ADCs 3a, c for in vivo treatment efficacy in JIMT-1 and KPL-4 xenograft mouse models (Fig. 4c–f and Supplementary Fig. 13, 14). It has been reported that athymic nude mice quickly clear exogenously introduced IgGs35. Therefore, to prevent fast clearance of administered ADCs, tumor-bearing mice were preconditioned by intravenous administration of human IgGs (30 mg kg–1)36, 37. A single dose of each ADC (1 or 3 mg kg–1) or vehicle control was injected intravenously into tumor-bearing mice. Tumor volume and body weight were measured every 3 days. No significant toxicity caused by administration of either ADC was observed over the course of study (Supplementary Fig. 14). A single dose of EVCit-based ADC 3c at 3 mg kg–1 was curative and no tumor regrowth was visually observed in either model at the end of study (Fig. 4c–f). Furthermore, ADC 3c was potent even at a lower dose (1 mg kg–1) in the JIMT-1 model and all five mice that received this treatment survived over the course of study (Fig. 4c, e). In contrast, VCit ADC 3a exhibited only partial inhibition of tumor growth despite the high in vitro cell killing potency. Almost all mice that received this treatment died or reached a humane endpoint that required euthanasia before the end of study (four out of five mice dead in the JIMT-1 model; all five mice dead in the KPL-4 model) (Fig. 4c–f). Taking into account the molecular structure of ADC 3c, these results demonstrate that the EVCit cleavable linker system can fully elicit the therapeutic potential of ADCs in mouse models even if it is spatially sequestered from the mAb through a long spacer.
We have shown that VCit-containing acidic tripeptides with high polarity, in particular an EVCit tripeptide sequence, have significantly enhanced stability in mouse and human plasma while remaining susceptible to intracellular cathepsin-mediated proteolytic cleavage. Notably, the small molecule-based stability assay clearly demonstrates that a carboxylic acid side chain at the P3 position provides much greater stabilization effect than does a 2-hydroxyacetamide group, the modifier that reportedly conferred the VCit sequence with the highest stability in mouse plasma23. These features make the EVCit sequence ideal cleavable ADC linker design for increasing the hydrophilicity under physiological conditions, maximizing the therapeutic potential, and minimizing the risk of systemic toxicity in mouse models caused by premature payload release. Indeed, a homogeneous anti-HER2 ADC constructed using an EVCit–PABC linker along with our branched linker technology29 exhibited higher hydrophilicity and by far greater long-term in vivo stability than did ADCs equipped with a conventional VCit or SVCit, an analogue of the hydroxy-functionalized tripeptide ADC linker that reportedly exhibited increased stability in mouse plasma23. In addition, although treatment with a VCit-based anti-HER2 ADC showed poor therapeutic effect, treatment with the stable EVCit ADC led to complete remission in two xenograft mouse models of HER2-positive breast cancer. Both ADCs contain long PEG spacers within the linker scaffold fully exposing the cleavable peptide moieties. Thus, the EVCit linker system most likely provides great resistance to Ces1c-mediated degradation in mouse models even with a high degree of exposure. Although the EVCit sequence is promising in its present form, future structure–activity relationship studies on the interaction between this peptide sequence and the mouse Ces1c will provide in-depth insights into the observed stabilizing effect. Such understanding may enable us to design further improved ADC linkers.
The use of EVCit or similar peptide linkers (e.g., EVA, DVCit, DVA) could serve as a simple but powerful solution to salvage many types of ADCs previously abandoned due to linker instability in mouse models. The high polarity of the EVCit linker could also help mitigate the aggregation and fast clearance issues associated with hydrophobic high-DAR ADCs38. In addition, EVCit linkers may be preferentially chosen over non-cleavable linkers in the future design of various ADCs. Non-cleavable linkers are designed to withstand proteolytic degradation in circulation. They have been successfully used for constructing potent ADCs along with MMAF39, monomethyl auristatin D (MMAD)40, and emtansine (DM1)7, 8. However, the use of non-cleavable linkers reportedly attenuates or nullifies ADC potency of some payload molecules including doxorubicin39, monomethyl auristatin E (MMAE)34, 39, a hydrophilic auristatin derivative41, and a pyrrolobenzodiazepine dimer (PBD)34. Attenuation of ADC potency arises because non-cleavable linkers lack a defined cleavage mechanism; after intracellular protein degradation, final active metabolites retain the linker component. It has been demonstrated that this drawback can be circumvented in some cases by fine-tuning the chemical structures of the linker and payload42, 43. However, the success of such efforts depends on the choice of the linker installation sites, conjugation modality, and payload. Indeed, as we have demonstrated in this and previous reports29, our branched linker technology requires both adequate spacers and cleavable mechanisms within the linker scaffold for maximal ADC potency. These components are critical to alleviate the structural congestion and to ensure rapid payload release in an active form from each linker arm.
In summary, our findings support the conclusion that the EVCit linker technology is a significant contribution to efforts for developing next-generation ADCs and other drug conjugates. This technology will allow for flexible molecular design by minimizing challenges of linker instability and poor potency in preclinical studies. With further validation and optimization, this linker technology will benefit a diverse array of conjugation methods and linker systems developed to date, including conventional couplings at lysine or cysteine residues, site-specific conjugations at solvent accessible moieties (e.g., conjugation at the C-terminus of the antibody heavy chain)44,45,46, and branched ADC linkers for heterologous payload loading47, 48. Furthermore, the long half-life of the acidic tripeptide linkers, as seen for EVCit and DVCit probes 1c, d, will be useful for constructing small molecule-based drug conjugates for targeted therapy49, 50.
Cathepsin B-mediated cleavage assay using pyrene probes
Each test compound (10 mM in DMSO, 2 µL) was mixed with 97 µL of MES buffer (25 mM MES-Na, 1 mM DTT, pH 5.0) and 1 µL of 1-pyrenemethylamine (10 mM in DMSO, internal standard). The mixture was incubated at 37 °C for 10 min. Pre-warmed human liver cathepsin B (20 ng µL–1, EMD Millipore) in 100 µL MES buffer was added to the mixture, followed by incubation at 37 °C. Aliquots (10 µL) were collected at each time point (0, 0.5, 1, 3, 24, and 48 h). Cold acetonitrile containing 1% formic acid (40 µL) was added to precipitate proteins. Precipitated proteins were separated by centrifugation (15,000 × g, 4 °C, 30 min) and supernatant of each sample was analyzed for quantification by analytical HPLC (UV absorption at 342 nm). The amount of each probe was normalized to the peak area of the internal standard. All assays were performed at least three times in technical duplicate, and data shown are representative of the replicates.
Plasma stability test using pyrene probes
Each test compound (10 mM in DMSO, 2 µL) was mixed with 1 µL of 1-pyrenemethylamine (10 mM in DMSO, internal standard) and incubated at 37 °C for 10 min. Pre-warmed human plasma pooled from healthy donors or BALB/c mouse plasma (197 µL, Innovative Research) was added to the mixture, followed by incubation at 37 °C. Aliquots (10 µL) were collected at each time point (0, 1, 6, 24, 48, and 96 h) and 40 µL of cold acetonitrile containing 1% formic acid was added to precipitate proteins. Supernatant of each sample was obtained and analyzed for quantification by analytical HPLC as described above. All assays were performed in triplicate.
MTGase-mediated antibody–linker conjugation
See the Supplementary Information for the preparation of human mAbs with a N297A mutation. Anti-HER2 IgG1 with a N297A mutation (291 µL in PBS, 11.79 mg mL–1, 3.43 mg antibody) was incubated with branched linker 2 (18.3 µL of 100 mM stock in water, 80 equiv.) and Activa TI® (77 µL of 40% solution in PBS, Ajinomoto, purchased from Modernist Pantry) at room temperature for 16–20 h. The reaction was monitored using an Agilent G1946D LC/ESI-MS system equipped with a MabPac RP column (3 × 50 mm, 4 µm, Thermo Scientific). Elution conditions were as follows: mobile phase A = water (0.1% formic acid); mobile phase B = acetonitrile (0.1% formic acid); gradient over 6.8 min from A:B = 75:25 to 1:99; flow rate = 0.4 mL min–1. The conjugated antibody was purified by SEC (Superdex 200 increase 10/300 GL, GE Healthcare, solvent: PBS, flow rate = 0.6 mL min–1) to afford an antibody-linker conjugate (3.15 mg, 92% yield determined by bicinchoninic acid assay).
Strain-promoted azide−alkyne cycloaddition for payload installation
DBCO–VCit–PABC–MMAF (12.6 µL of 4 mM stock solution in DMSO, 1.5 equivalent per azide group) was added to a solution of the mAb–linker conjugate in PBS (303.0 µL, 4.0 mg mL–1), and the mixture was incubated at room temperature for 1 h. The reaction was monitored using an Agilent G1946D LC/ESI-MS system equipped with a MabPac RP column and the crude products were purified by SEC to afford ADC 3a (>95% yield determined by bicinchoninic acid assay). Analysis and purification conditions were the same as described above (see the previous section). Average DAR values were determined based on UV peak areas. ADCs 3b, c were prepared in the same manner. Purified ADCs were formulated in citrate buffer (20 mM sodium citrate and 1 mM citric acid, pH 6.6) containing 0.1% Tween 80 and trehalose (70 mg mL–1)32 and stored at 4 °C.
Each ADC (1 mg mL–1, 10 µL in PBS) was analyzed using an Agilent 1100 HPLC system equipped with a MAbPac HIC-Butyl column (4.6 × 100 mm, 5 µm, Thermo Scientific). Elution conditions were as follows: mobile phase A = 50 mM sodium phosphate containing ammonium sulfate (1.5 M) and 5% isopropanol (pH 7.4); mobile phase B = 50 mM sodium phosphate containing 20% isopropanol (pH 7.4); gradient over 30 min from A:B = 99:1 to 1:99; flow rate = 0.5 mL min–1.
Long-term stability test
Each ADC (1 mg mL–1, 100 µL) in PBS was incubated at 37 °C. Aliquots (10 µL) were taken at each time point (7, 14, and 28 days) and immediately stored at −80 °C until use. Samples were analyzed using an Agilent 1100 HPLC system equipped with a MAbPac SEC-1 analytical column (4.0 × 300 mm, 5 µm, Thermo Scientific). Elution conditions were as follows: flow rate = 0.2 mL min–1; solvent = PBS.
Antibodies for ELISA
All antibodies used in the ELISA assays in this study were purchased from commercial vendors as follows: Rabbit anti-MMAF antibody (LEV-PAF1) from Levena Biopharma, goat anti-human IgG Fab–HRP conjugate (109-035-097), goat anti-human IgG Fc antibody (109-005-098), and donkey anti-human IgG–HRP conjugate (709-035-149) from Jackson ImmunoResearch, and goat anti-rabbit IgG–HRP conjugate (32260) from Thermo Scientific.
Plasma stability test using ADCs
 Stability in mouse plasma. Each ADC (100 µg mL–1, 1.2 µL in PBS) was added to undiluted BALB/c mouse plasma (118.8 µL) to a final concentration of 1 µg mL–1. After incubation at 37 °C for varying time, aliquots (15 µL each) were taken and stored at −80 °C until use. Samples were analyzed by sandwich ELISA assay. A high-binding 96-well plate (Corning) was coated with rabbit anti-MMAF antibody (100 ng per well). After overnight coating at 4 °C, the plate was blocked with 100 µL of 2% BSA in PBS containing 0.05% Tween 20 (PBS-T) with agitation at room temperature for 1 h. Subsequently, the solution was removed and each ADC sample (100 µL in PBS-T containing 1% BSA) was added to each well, and the plate was incubated at room temperature for 2 h. After each well was washed three times with 100 µL of PBS-T, 100 µL of goat anti-human IgG Fab–HRP conjugate (1:10,000) was added. After being incubated at room temperature for 1 h, the plate was washed three times with 100 µL of PBS-T and 100 μL of 3,3′,5,5′-tetramethylbenzidine (TMB) substrate (0.1 mg mL–1) in phosphate–citrate buffer/30% H2O2 (1:0.0003 volume to volume, pH 5) was added. After color was developed for 10−30 min, 25 μL of 3N-HCl was added to each well and then the absorbance at 450 nm was recorded using a plate reader (Biotek Cytation 5). Concentrations were calculated based on a standard curve.  Stability in human plasma. Assays were performed in the same manner using human HER2 (100 ng per well, ACROBiosystems) for plate coating, rabbit anti-MMAF antibody (1:5,000) and goat anti-rabbit IgG–HRP conjugate (1:10,000) as secondary and tertiary detection antibodies, respectively. All assays were performed in triplicate.
Human cathepsin cleavage assay for ADCs
Each ADC (1 mg mL–1) in 30 µL of MES buffer (10 mM MES-Na, 40 µM DTT, pH 5.0) was incubated at 37 °C for 10 min. To the solution was added pre-warmed human cathepsin B (20 ng µL–1), cathepsin L (20 ng µL–1), cathepsin S (2 ng µL–1, all cathepsins from EMD Millipore), or a mixture of the three (B: 6.67 ng µL–1; L: 6.67 ng µL–1; S: 0.67 ng µL–1) in 30 µL MES buffer, followed by incubation at 37 °C. Aliquots (20 µL) were collected at each time point (4, 10.5, and 24 h in Supplementary Fig. 8; 5 and 24 h in Supplementary Table 1) and treated with EDTA-free protease inhibitor cocktails (0.5 µL of 100X solution, Thermo Scientific). All samples were analyzed using an Agilent 1100 HPLC system equipped with a MabPac RP column (3 × 50 mm, 4 µm, Thermo Scientific). Elution conditions were as follows: Mobile phase A = water (0.1% formic acid; mobile phase B = acetonitrile (0.1% formic acid); gradient over 6.8 min from A:B = 75:25 to 1:99; flow rate = 0.4 mL min–1. Average DAR values were determined based on UV peak areas.
JIMT-1 (AddexBio), BT-474 (ATCC), and SKBR-3 (ATCC) were cultured in RPMI1640 (Corning) supplemented with 10% EquaFETAL® (Atlas Biologicals), GlutaMAX® (2 mM, Gibco), sodium pyruvate (1 mM, Corning), and penicillin-streptomycin (penicillin: 100 units mL–1; streptomycin: 100 µg mL–1, Gibco). KPL-4 (provided by Dr. Junichi Kurebayashi at Kawasaki Medical School)51 and MDA-MB-231 (ATCC) were cultured in DMEM (Corning) supplemented with 10% EquaFETAL®, GlutaMAX®(2 mM), and penicillin-streptomycin (penicillin: 100 units mL–1; streptomycin: 100 µg mL–1). All cells were cultured at 37 °C under 5% CO2 and passaged before becoming fully confluent up to 10 passages. All cell lines were periodically tested for mycoplasma contamination. Cells were validated for the HER2 expression level in cell-based ELISA prior to use (see the following Cell-based ELISA section).
Cells (KPL-4 or MDA-MB-231) were seeded in a culture-treated 96-well clear plate (10,000 cells per well in 100 μL culture medium) and incubated at 37 °C under 5% CO2 for 24 h. Paraformaldehyde (8%, 100 μL) was added to each well and incubated for 15 min at room temperature. The medium was aspirated and the cells were washed three times with 100 μL of PBS. Cells were treated with 100 μL of blocking buffer (0.2% BSA in PBS) with agitation at room temperature for 2 h. After the blocking buffer was discarded, serially diluted samples (in 100 µL PBS containing 0.1% BSA) were added and the plate was incubated overnight at 4 °C with agitation. The buffer was discarded and the cells were washed three times with 100 μL of PBS containing 0.25% Tween 20. Cells were then incubated with 100 μL of donkey anti-human IgG–HRP conjugate (diluted 1:10,000 in PBS containing 0.1% BSA) at room temperature for 1 h. The plate was washed three times with PBS containing 0.25% Tween 20, and 100 μL of TMB substrate (0.1 mg mL–1) in phosphate–citrate buffer/30% H2O2 (1:0.0003 volume to volume, pH 5) was added. After color was developed for 10−30 min, 25 μL of 3N-HCl was added to each well and then the absorbance at 450 nm was recorded using a plate reader (Biotek Cytation 5). Concentrations were calculated based on a standard curve. K D values were then calculated using Graph Pad Prism 7 software. All assays were performed in triplicate.
Cell viability assay
Cells were seeded in a culture-treated 96-well clear plate (5,000 cells per well in 50 μL culture medium) and incubated at 37 °C under 5% CO2 for 24 h. Serially diluted samples (50 µL) were added to each well and the plate was incubated at 37 °C for 72 h (KPL-4 and SKBR-3) or 96 h (JIMT-1, MDA-MB-231, and BT-474). After the old medium was replaced with 100 µL fresh medium, 20 μL of a mixture of WST-8 (1.5 mg mL–1, Cayman chemical) and 1-methoxy-5-methylphenazinium methylsulfate (1-methoxy PMS, 100 μM, Cayman Chemical) was added to each well, and the plate was incubated at 37 °C for 2 h. After gently agitating the plate, the absorbance at 460 nm was recorded using a plate reader. EC50 values were calculated using Graph Pad Prism 7 software. All assays were performed in quadruplicate.
All procedures were approved by the Animal Welfare Committee of the University of Texas Health Science Center at Houston and performed in accordance with the institutional guidelines for animal care and use.
In vivo pharmacokinetics study
Female BALB/c mice (6−8 weeks old, n = 3 per group, The Jackson Laboratory) were injected intravenously with each mAb or ADC sample (100 μL) at a dose of 3 mg kg–1. After injection, blood (5−10 µL) was drawn through the tail vein at each time point (15 min, 6 h, 1 day, 2 days, 4 days, 9 days, and 14 days) and processed with 5 mM EDTA in PBS. Plasma samples were stored at −80 °C until use. All mice were humanely euthanized after last blood collection. Plasma samples were analyzed by sandwich ELISA. For determination of the total antibody concentration (both conjugated and unconjugated), goat anti-human IgG Fc antibody (500 ng per well) and goat anti-human IgG Fab–HRP conjugate (1:5,000) were used for plate coating and detection, respectively. For determination of ADC concentration (conjugated only), rabbit anti-MMAF antibody (100 ng per well) and goat anti-human IgG Fab–HRP conjugate (1:10,000) were used in the same manner. Assays were performed in the same manner as described above (see the section of the plasma stability test for ADCs). Concentrations were calculated based on a standard curve. Half-life at the elimination phase (t1/2β) was estimated using methods for non-compartmental analysis52 and area under the curve (AUC0-14 days, h × μg mL–1) of each sample was calculated using GraphPad Prism 7 software (Supplementary Table 5).
In vivo xenograft mouse models of human breast cancer
To produce KPL-4 or JIMT-1 tumors, female NCr nude mice (6−8 weeks old, Taconic Biosciences) were orthotopically injected into the mammary fat pad with 5−7 × 106 cells suspended in 50 µL of 1:1 PBS/Cultrex® BME Type 3 (Trevigen). When the tumor volume reached ~100 mm3, mice were randomly assigned to three or four groups (n = 3 for vehicle in the KPL-4 model; n = 5 for vehicle in the JIMT-1 model and ADCs in both models) and preconditioned with sterile-filtered human IgG (30 mg kg–1, Innovative Research, catalog number: IRHUGGFLY1G) injected via the tail vein36, 37. After 24 h, a single dose of 100 μL VCit ADC 3a (3 mg kg–1), EVCit ADC 3c (1 or 3 mg kg–1), or vehicle was administered to mice intravenously. Tumor volume and body weight were monitored every 3 days using a digital caliper. Mice were euthanized when the tumor volume exceeded 1000 mm3, the tumor size exceeded 2 cm in diameter, greater than 15% weight loss was observed, or mice showed signs of distress.
No statistical analysis was performed to determine sample size prior to experiments, but the sample size was determined according to similar experiments in the field reported previously. We did not intend to use the vehicle control groups in the xenograft studies for statistical analysis. The investigators were not blinded to allocation during experiments. No samples or animals were excluded from the studies. For the in vivo PK analysis, a Welch’s t-test (two-tailed, unpaired, uneven variance) was used to determine statistical significance of the observed differences. For the xenograft model studies, a Mann–Whitney U test (two-tailed, unpaired, non-parametric) was used. Kaplan-Meier survival curve statistics were analyzed with a log-rank (Mantel–Cox) test. To adjust the family wise error rate with a Bonferroni correction, P values less than [0.05 divided by the number of comparisons] were considered statistically significant. See Supplementary Table 6 for all P values.
The authors declare that all the data supporting the findings of this study are available within the paper, its supplementary information file, or from the corresponding author upon reasonable request.
Chari, R. V. J., Miller, M. L. & Widdison, W. C. Antibody-drug conjugates: an emerging concept in cancer therapy. Angew. Chem. Int. Ed. 53, 3796–3827 (2014).
Perez, H. L. et al. Antibody-drug conjugates: current status and future directions. Drug Discov. Today 19, 869–881 (2014).
Tsuchikama, K. & An, Z. Antibody-drug conjugates: recent advances in conjugation and linker chemistries. Protein Cell 9, 33–46 (2018).
McCombs, J. R. & Owen, S. C. Antibody drug conjugates: design and selection of linker, payload and conjugation chemistry. AAPS J. 17, 339–351 (2015).
Younes, A. et al. Brentuximab vedotin (SGN-35) for relapsed CD30-positive lymphomas. N. Engl. J. Med. 363, 1812–1821 (2010).
Senter, P. D. & Sievers, E. L. The discovery and development of brentuximab vedotin for use in relapsed Hodgkin lymphoma and systemic anaplastic large cell lymphoma. Nat. Biotechnol. 30, 631–637 (2012).
LoRusso, P. M., Weiss, D., Guardino, E., Girish, S. & Sliwkowski, M. X. Trastuzumab emtansine: a unique antibody-drug conjugate in development for human epidermal growth factor receptor 2-positive cancer. Clin. Cancer Res. 17, 6437–6447 (2011).
Verma, S. et al. Trastuzumab emtansine for HER2-positive advanced breast cancer. N. Engl. J. Med. 367, 1783–1791 (2012).
Ricart, A. D. Antibody-drug conjugates of calicheamicin derivative: gemtuzumab ozogamicin and inotuzumab ozogamicin. Clin. Cancer Res. 17, 6417–6427 (2011).
Godwin, C. D., Gale, R. P. & Walter, R. B. Gemtuzumab ozogamicin in acute myeloid leukemia. Leukemia 31, 1855–1868 (2017).
Diamantis, N. & Banerji, U. Antibody-drug conjugates--an emerging class of cancer treatment. Br. J. Cancer 114, 362–367 (2016).
Beck, A., Goetsch, L., Dumontet, C. & Corvaïa, N. Strategies and challenges for the next generation of antibody-drug conjugates. Nat. Rev. Drug. Discov. 16, 315–337 (2017).
Lehar, S. M. et al. Novel antibody-antibiotic conjugate eliminates intracellular S. aureus. Nature 527, 323–328 (2015).
Kern, J. C. et al. Discovery of pyrophosphate diesters as tunable, soluble, and bioorthogonal linkers for site-specific antibody-drug conjugates. J. Am. Chem. Soc. 138, 1430–1445 (2016).
Sievers, E. L. & Senter, P. D. Antibody-drug conjugates in cancer therapy. Annu. Rev. Med. 64, 15–29 (2013).
Polakis, P. Antibody drug conjugates for cancer therapy. Pharmacol. Rev. 68, 3–19 (2016).
Lu, J., Jiang, F., Lu, A. & Zhang, G. Linkers having a crucial role in antibody–drug conjugates. Int. J. Mol. Sci. 17, 561 (2016).
Hamblett, K. J. et al. Effects of drug loading on the antitumor activity of a monoclonal antibody drug conjugate. Clin. Cancer Res. 10, 7063–7070 (2004).
Junutula, J. R. et al. Site-specific conjugation of a cytotoxic drug to an antibody improves the therapeutic index. Nat. Biotechnol. 26, 925–932 (2008).
Behrens, C. R. et al. Antibody-drug conjugates (ADCs) derived from interchain cysteine cross-linking demonstrate improved homogeneity and other pharmacological properties over conventional heterogeneous ADCs. Mol. Pharm. 12, 3986–3998 (2015).
Katz, J., Janik, J. E. & Younes, A. Brentuximab vedotin (SGN-35). Clin. Cancer Res. 17, 6428–6436 (2011).
Gordon, M. R. et al. Field guide to challenges and opportunities in antibody-drug conjugates for chemists. Bioconjugate Chem. 26, 2198–2215 (2015).
Dorywalska, M. et al. Molecular basis of valine-citrulline-pabc linker instability in site-specific ADCs and Its mitigation by linker design. Mol. Cancer Ther. 15, 958–970 (2016).
Shen, B.-Q. et al. Conjugation site modulates the in vivo stability and therapeutic activity of antibody-drug conjugates. Nat. Biotechnol. 30, 184–189 (2012).
Lhospice, F. et al. Site-specific conjugation of monomethyl auristatin E to anti-CD30 antibodies improves their pharmacokinetics and therapeutic index in rodent models. Mol. Pharm. 12, 1863–1871 (2015).
Elgersma, R. C. et al. Design, synthesis, and evaluation of linker-duocarmycin payloads: toward selection of HER2-targeting antibody-drug conjugate SYD985. Mol. Pharm. 12, 1813–1835 (2015).
Dorywalska, M. et al. Effect of attachment site on stability of cleavable antibody drug conjugates. Bioconjugate Chem. 26, 650–659 (2015).
Dal Corso, A., Cazzamalli, S., Gébleux, R., Mattarella, M. & Neri, D. Protease-cleavable linkers modulate the anticancer activity of noninternalizing antibody-drug conjugates. Bioconjugate Chem. 28, 1826–1833 (2017).
Anami, Y. et al. Enzymatic conjugation using branched linkers for constructing homogeneous antibody-drug conjugates with high potency. Org. Biomol. Chem. 15, 5635–5642 (2017).
van Geel, R. et al. Chemoenzymatic conjugation of toxic payloads to the globally conserved n-glycan of native mabs provides homogeneous and highly efficacious antibody-drug conjugates. Bioconjugate Chem. 26, 2233–2242 (2015).
Shi, Y. et al. Engagement of immune effector cells by trastuzumab induces HER2/ERBB2 downregulation in cancer cells through STAT1 activation. Breast Cancer Res. 16, R33 (2014).
Dennler, P. et al. Transglutaminase-based chemo-enzymatic conjugation approach yields homogeneous antibody-drug conjugates. Bioconjugate Chem. 25, 569–578 (2014).
Lyon, R. P. et al. Reducing hydrophobicity of homogeneous antibody-drug conjugates improves pharmacokinetics and therapeutic index. Nat. Biotechnol. 33, 733–735 (2015).
Caculitan, N. G. et al. Cathepsin B is dispensable for cellular processing of cathepsin B-cleavable antibody-drug conjugates. Cancer Res. 77, 7027–7037 (2017).
Reddy, N. et al. Rapid blood clearance of mouse IgG2a and human IgG1 in many nude and nu/ + mouse strains is due to low IgG2a serum concentrations. Cancer Immunol. Immunother. 46, 25–33 (1998).
Stefan, N. et al. Highly potent, anthracycline-based antibody-drug conjugates generated by enzymatic, site-specific conjugation. Mol. Cancer Ther. 16, 879–892 (2017).
Nanna, A. R. et al. Harnessing a catalytic lysine residue for the one-step preparation of homogeneous antibody-drug conjugates. Nat. Commun. 8, 1112 (2017).
Sun, X. et al. Effects of drug-antibody ratio on pharmacokinetics, biodistribution, efficacy, and tolerability of antibody-maytansinoid conjugates. Bioconjugate Chem. 28, 1371–1381 (2017).
Doronina, S. O. et al. Enhanced activity of monomethylauristatin f through monoclonal antibody delivery: effects of linker technology on efficacy and toxicity. Bioconjugate Chem. 17, 114–124 (2006).
Strop, P. et al. Site-specific conjugation improves therapeutic index of antibody drug conjugates with high drug loading. Nat. Biotechnol. 33, 694–696 (2015).
Mendelsohn, B. A. et al. Investigation of hydrophilic auristatin derivatives for use in antibody drug conjugates. Bioconjugate Chem. 28, 371–381 (2017).
Gregson, S. J. et al. Pyrrolobenzodiazepine dimer antibody–drug conjugates: synthesis and evaluation of noncleavable drug-linkers. J. Med. Chem. 60, 9490–9507 (2017).
Christie, R. et al. Pyrrolobenzodiazepine antibody-drug conjugates designed for stable thiol conjugation. Antibodies 6, 20 (2017).
Rabuka, D., Rush, J. S., deHart, G. W., Wu, P. & Bertozzi, C. R. Site-specific chemical protein conjugation using genetically encoded aldehyde tags. Nat. Protoc. 7, 1052–1067 (2012).
Beerli, R. R., Hell, T., Merkel, A. S. & Grawunder, U. Sortase enzyme-mediated generation of site-specifically conjugated antibody drug conjugates with high in vitro and in vivo potency. PLoS ONE 10, e0131177 (2015).
Drake, P. M. et al. Aldehyde tag coupled with HIPS chemistry enables the production of ADCs conjugated site-specifically to different antibody regions with distinct in vivo efficacy and PK outcomes. Bioconjugate Chem. 25, 1331–1341 (2014).
Maruani, A. et al. A plug-and-play approach to antibody-based therapeutics via a chemoselective dual click strategy. Nat. Commun. 6, 6645 (2015).
Levengood, M. R. et al. Orthogonal cysteine protection enables homogeneous multi‐drug antibody–drug conjugates. Angew. Chem. Int. Ed. 56, 733–737 (2017).
Srinivasarao, M., Galliford, C. V. & Low, P. S. Principles in the design of ligand-targeted cancer therapeutics and imaging agents. Nat. Rev. Drug. Discov. 14, 203–219 (2015).
Cazzamalli, S., Dal Corso, A. & Neri, D. Linker stability influences the anti-tumor activity of acetazolamide-drug conjugates for the therapy of renal cell carcinoma. J. Control Release 246, 39–45 (2017).
Kurebayashi, J. et al. Isolation and characterization of a new human breast cancer cell line, KPL-4, expressing the Erb B family receptors and interleukin-6. Br. J. Cancer 79, 707–717 (1999).
Gabrielsson, J. & Weiner, D. Non-compartmental analysis. Methods Mol. Biol. 929, 377–389 (2012).
We gratefully acknowledge Prof. Junichi Kurebayashi (Kawasaki Medical School) for providing us with the cell line KPL-4. We thank Dr. Mohmmad Y. Wani for technical support and insightful opinions, and Dr. Georgina T. Salazar for editing the manuscript. This work was supported by the Department of Defense (the Breast Cancer Research Program, W81XWH-18-1-0004 to K.T.), The University of Texas System (Regents Health Research Scholars Award to K.T.), the Cancer Prevention and Research Institute of Texas (RP150551 to Z.A.), and the Welch Foundation (AU-0042-20030616 to Z.A.).
Y.A., C.M.Y., N.Z., Z.A., and K.T. are named inventors on a pending patent application relating to the work filed by The University of Texas Health Science Center at Houston. The remaining authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Anami, Y., Yamazaki, C.M., Xiong, W. et al. Glutamic acid–valine–citrulline linkers ensure stability and efficacy of antibody–drug conjugates in mice. Nat Commun 9, 2512 (2018) doi:10.1038/s41467-018-04982-3
Highly potent monomethyl auristatin E prodrug activated by caspase-3 for the chemoradiotherapy of triple-negative breast cancer
Novel Silyl Ether-Based Acid-Cleavable Antibody-MMAE Conjugates with Appropriate Stability and Efficacy
Frontiers in Pharmacology (2019)
Drug Delivery System (2019)
Signed, Sealed, Delivered: Conjugate and Prodrug Strategies as Targeted Delivery Vectors for Antibiotics
ACS Infectious Diseases (2019)