Complementing enzymes in their native environment with either homogeneous or heterogeneous catalysts is challenging due to the sea of functionalities present within a cell. To supplement these efforts, artificial metalloenzymes are drawing attention as they combine attractive features of both homogeneous catalysts and enzymes. Herein we show that such hybrid catalysts consisting of a metal cofactor, a cell-penetrating module, and a protein scaffold are taken up into HEK-293T cells where they catalyze the uncaging of a hormone. This bioorthogonal reaction causes the upregulation of a gene circuit, which in turn leads to the expression of a nanoluc-luciferase. Relying on the biotin–streptavidin technology, variation of the biotinylated ruthenium complex: the biotinylated cell-penetrating poly(disulfide) ratio can be combined with point mutations on streptavidin to optimize the catalytic uncaging of an allyl-carbamate-protected thyroid hormone triiodothyronine. These results demonstrate that artificial metalloenzymes offer highly modular tools to perform bioorthogonal catalysis in live HEK cells.
In recent years, there has been an increasing effort to exploit the cell as a test-tube to complement the biochemical reaction networks with abiotic reactions1, 2 (Fig. 1a). With this goal in mind, both organometallic complexes and nanoparticles have been shown to catalyze abiotic reactions in Escherichia coli3,4,5,6,7, mammalian cells8,9,10,11,12,13,14,15,16,17,18,19,20,21, and animals22,23,24,25. The outcome of such intracellular abiotic reactions has been mostly limited to a bioorthogonal output (i.e. uncaging of a fluorescent molecule or labeling of a protein) or a loss-of-function (i.e. drug-release that leads to cell death)3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25. In a limited number of cases however, a gain-of-function (productive modulation/activation of cellular function) by an intracellular abiotic reaction has been reported26, 27.
In addition to these efforts, metabolic engineering in E. coli, yeast, and higher organisms has received increasing attention thanks to its enormous potential to produce either high-added value products and biofuels or to cure diseases28. In this latter context, the assembly of gene switches allows for the construction of engineered mammalian cells that are capable of sensing the extracellular environment and producing output molecules on demand (Fig. 1b)29,30,31. Thus far, only genetically encodable modules have been integrated into designer mammalian cells. This limits the available intracellular reaction repertoire to those accessible from engineered natural enzymes.
Artificial metalloenzymes (ArMs hereafter), which result from incorporation of an organometallic moiety within a protein scaffold, combine attractive features of both homogeneous- and enzymatic catalysts (Fig. 1c and Fig. 2)32, 33. Most recently, the groups of Tezcan34 and Ward6 have demonstrated the possibility to assemble and use ArMs in vivo in the periplasm of E. coli. As a next step, we aim to integrate an ArM in a designed mammalian cell to upregulate the expression of a reporter protein via a complex reaction cascade (Fig. 1c). To achieve this goal, the following challenges need to be addressed: (i) the efficient uptake of an ArM into mammalian cells; (ii) the assembly of a gene switch that senses and responds to the product of the ArM resulting in (iii) the intracellular upregulation of the gene switch by the ArM.
Herein we demonstrate the proof-of-principle of an intracellular abiotic reaction enabled by an ArM modified with a cell-penetrating module. This cell-penetrating ArM is taken up into mammalian cells and catalyzes an abiotic reaction, leading to the upregulation of a designed gene circuit.
Design of a cell-penetrating artificial metalloenzyme
Thus far, most of the reported intracellular abiotic catalysis has relied on the catalysts’ inherent cell permeability: only few reports have used cell-permeable carrier modules13, 16, 19, 20. In the absence of a cell-permeable moiety, the efficiency of the catalyst’s cellular uptake has been a matter of controversy14, 35. To achieve efficient delivery of an organometallic catalyst into cells, we capitalize on the homotetrameric nature of a streptavidin scaffold to combine an abiotic biotinylated catalyst with a biotinylated cell-penetrating moiety. Additional attractive features of ArMs based on the biotin–streptavidin technology include: (i) the possibility to optimize the catalytic performance using genetic means6, 36 and (ii) protection of the precious metal cofactor against detrimental cellular components6, 37. We hypothesized that this Sav-based approach to assemble a cell-permeable ArMs may provide a versatile tool for the introduction of synthetic catalysts into cells.
With the aim of combining a gene switch with an abiotic reaction catalyzed by an ArM in a designer mammalian cell, we combined a ruthenium catalyst for the intracellular O-allyl carbamate cleavage12, 14, 19, 35 with a gene switch that is upregulated in the presence of the thyroid hormone, triiodothyronine (T3)38. The T3 hormone is known to affect thermogenesis, carbohydrate metabolism, and lipid homeostasis in all tissues. Our T3-responsive gene switch has been shown to work in various cell lines, including HEK-293T, Hela, immortalized human mesenchymal stem cells (hMSC-TERT), HT-1080, and CHO-K1 cells38. Among these cell lines, we selected HEK-293T cells, which is the most responsive. Building on the ruthenium complex 1 introduced by Meggers and co-workers14, the biotinylated ruthenium complex 2 was prepared in situ by mixing [CpRu(NCCH3)3](PF6) 3 and the biotinylated ligand 4 in a 1:1 ratio. (Fig. 2). We selected the cell-penetrating poly(disulfide) (CPD) 5, which was previously developed by us, as a cell-permeable module (Fig. 2)39, 40. CPD is taken up via dynamic covalent disulfide exchange with thiols on mammalian cell surfaces. The presence of glutathione in the cytosol leads to depolymerization of the CPD, thus alleviating continual membrane-perturbing activities and reducing cytotoxicity compared to traditional arginine-rich cell-penetrating peptides40, 41. Relying on the versatility of the CPD as demonstrated for Hela cells39 and Drosophila S2 cells40, we hypothesized that these would be applicable for HEK-293T cells as well.
In vitro optimization of the ArM
To ensure efficient coupling between the reaction catalyzed by the ArM and the gene switch, the performance of the ArM 22 ⊂ Sav (the subscript indicates the number of biotinylated catalyst moieties 2 added to the homotetrameric Sav) was optimized by single point mutations of the Sav scaffold for the O-allyl carbamate cleavage of the caged hormone (AT3) 6, to yield T3 7 (Fig. 3, Supplementary Figure 1). The ruthenium complex 1 (ref.14) displayed higher activity than both the biotinylated ruthenium complex 2 and the corresponding ArM 22 ⊂ Sav wild type in vitro. Genetic optimization of the catalytic performance of 22 ⊂ Sav was achieved by site-directed mutagenesis at position Sav S112X or K121X, which are the putative closest lying amino acid residues36. The mutant 22 ⊂ Sav S112A had a 2.5-fold higher TON (turnover number) than the wild-type ArM and a comparable activity to the catalyst 1. None of the screened double mutants outperformed 22 ⊂ Sav S112A, which was selected for subsequent studies.
Designer cells with a T3-gene switch
In order to monitor the output of the reaction cascade, which is reflected by the transgene expression level resulting from the T3-gene switch, we slightly adapted a previously reported thyroid hormone-responsive gene switch in HEK-293T cells (Fig. 4a–c)38. This modified thyroid hormone-responsive gene switch consists of a set of two plasmids, pSP27 and pYO1. The plasmid pSP27 codes for a synthetic thyroid hormone receptor (TSR), which is a fusion protein comprised of the DNA-binding domain of yeast Gal4 and the T3-binding domain of human thyroid receptor α (PhCMV-TSR-pA) (PhCMV: human cytomegalovirus promoter). The plasmid pYO1 comprises a Gal4-specific operator sequence (PUAS5) connected to a minimal hCMV promoter (PhCMVmin) that drives expression of a secreted nanoluc (sec-nluc), a potent bioluminescence reporter (PUAS5-sec-nluc-pA). In the absence of T3 7, TSR binds to PUAS5 and recruits endogenous corepressors, silencing mediators for retinoid or thyroid hormone receptors (SMRT)/nuclear receptor corepressor 2 (NcoR2), leading to histone deacetylation. As a result, the expression of sec-nluc is repressed (Fig. 4b). In the presence of T3 7, the TSR interaction with T3 recruits coactivators: steroid receptor coactivator 1 (SRC-1) and a 220-kDa thyroid hormone receptor-associated protein complex component (TRAP 220). These coactivators trigger histone acetylation to initiate sec-nluc expression, which is monitored by the luminescent conversion of furimazine 9 into product 10 (Fig. 4a). As an indicator of the cell viability, a human placental secreted alkaline phosphatase (SEAP), was co-expressed constitutively by pSEAP2-control (PSV40-SEAP-pA) (PSV40: similian virus 40 promoter). Hydrolysis of p-nitrophenylphosphate 11 affords p-nitrophenolate 12, which can be monitored spectrophotometrically at 405 nm (Fig. 4a–c).
Transport of native T3 7 into cells usually relies on a transporter-mediated process42. As it was not clear whether the AT3 6 is transported into cell via this pathway, we modified AT3 6 to increase its cell permeability. For this purpose, we esterified the carboxylic group of AT3 6 with an acetoxymethyl (AM) group to yield AM-AT3 8 (refs.43, 44). Upon passive diffusion of AM-AT3 8 into the cytosol, endogenous esterases rapidly hydrolyze it to produce the allyl-carbamate protected AT3 6 (Fig. 4b, c).
First, we investigated the dose-dependence of T3 7 and AM-AT3 8 against the T3-responsive gene switch (pSP27 and pYO1) and the pSEAP-2 control (Supplementary Figure 2). When using T3 7, the luminescence intensity derived from the expressed sec-nluc activity reached a plateau at very high gene expression level (i.e. >6 nM T3 7). At concentrations below 500 nM, AM-AT3 8 did not induce sec-nluc expression. This highlights the efficient caging effect of the allyl carbamate moiety of AM-AT3 8. Gratifyingly, the phosphatase activity of SEAP did not decrease in the presence of AM-AT3 8: we thus conclude that it does not exhibit cytotoxicity at these concentrations.
Intracellular abiotic reaction
After the in vitro identification of the most active ArM for the allyl-carbamate cleavage of AT3 6 (see Fig. 3), we next assembled a cell-penetrating ArM 2 x 5 y ⊂ Sav S112A by sequential incorporation of the ruthenium complex 2 and biotinylated CPD 5 into Sav S112A (Fig. 2, Supplementary Figure 3 and Supplementary Discussion). Capitalizing on the four biotin-binding sites present in Sav, the ratio of the ruthenium catalyst 2 and CPD 5 was optimized. Based on a previous report40 and a preliminary screening experiment (Supplementary Figure 4), the concentrations of CPD 5 and AM-AT3 8 were set to 0.5 and 4 μM, respectively. These concentrations were selected to maximize the cellular uptake of the ArM with the minimum cell toxicity and minimize the background luminescence caused by AM-AT3 8.
The designer HEK-293T cells transfected with the T3-responsive gene switch were treated with ArM 2 x 5 y ⊂ Sav S112A. Following incubation and careful washing of the cells to remove surface-adsorbed ArM, the substrate AM-AT3 7 (4 μM) was added (Fig. 4a). We monitored the ArM’s uptake in the designer cell by the confocal microscopy (Supplementary Figure 5) and flow cytometry (Fig. 4d) before and after the reaction respectively. For comparison, the CPD 5 was replaced by Atto565-Biotin, which exhibits similar spectroscopic features to CPD 5 but is not internalized by covalent-mediated translocation through the cell-membrane (Supplementary Figure 6 and Supplementary Discussion), to afford 21(Atto565-Biotin)1 ⊂ Sav. In the case of 21(Atto565-Biotin)1 ⊂ Sav, the fluorescence derived from Atto565-Biotin was not detectable either by confocal microscopy or flow cytometry. This indicates that the ArM devoid of CPD 5 is not cell-permeable. In contrast, the cellular uptake of ArMs 2 x 5 y ⊂ Sav was confirmed by the pronounced increase in fluorescence within the cells caused by the presence of TAMRA moieties on the ArMs.
As for the intracellular reactions, the luminescence intensities resulting from the induced sec-nluc activity were markedly higher in the presence of the ArM 2151 ⊂ Sav S112A than with model catalyst 1 (Fig. 4e). Although its activity in vitro is comparable to that of the ArM 22 ⊂ Sav S112A (Fig. 3), the use of complex 1 did not lead to higher luminescence intensities than when the designer cells were treated with the substrate AM-AT3 8 but in the absence of any Ru-catalyst (Fig. 4e). The cofactor 2 alone and the ArM 21 ⊂ Sav S112A were also examined and found not to turn on the gene switch (Supplementary Figure 7 and Supplementary Discussion). This corroborates the flow cytometry observations, highlighting the limited uptake in HEK-293T cells when low Ru-concentrations are used (e.g. <1.5 μM)35. These results confirm that only cell-penetrating ArMs turn on the T3-responsive gene switch by producing T3 7 via the intracellular uncaging of AT3 6. Increasing the Ru-catalyst 2 to CPD 5 ratio led to higher luminescence intensities: the highest activity was observed with the ArM 2351 ⊂ Sav S112A. This highlights the importance of the “membrane permeability” and the “internalization” features of the cell-penetrating ArM. The cell viability, reflected by the SEAP activity, is essentially constant for all conditions tested. This confirms that there is no critical cytotoxicity for the intracellular reaction cascade (Fig. 4f).
Herein, we have demonstrated the versatility of a complex intracellular reaction cascade that results from combining a cell-penetrating ArM with a synthetic gene circuit. The uncaging reaction catalyzed by the ArM leads to the exquisite control of a designer cell, ultimately upregulating the activity of a genetically encoded sec-nluc. The observed output of this system is unambiguous. However, further improvement would be desirable for practical use. For this purpose, in vivo directed evolution of ArMs have proven versatile6. Also, it may be possible to stably integrate the gene switch into designer cells to allow for the selection of the best performing single cell clone45.
Although cell-targeting modules have previously been combined with organometallic moieties to catalyze intracellular transformations19, the use of a Sav-based ArM combines several attractive features including: (i) a straightforward means to assemble and optimize the ArMs by chemical and genetic strategies, (ii) easy modulation of the catalyst:CPD ratio to fine-tune the uptake and the activity of the ArM, (iii) a means to visualize by fluorescence the internalization of the ArM, and (iv) the shielding of the precious metal moiety within a protein scaffold37.
This proof-of-concept highlights the gain of cellular function that critically relies on a reaction requiring components that are not genetically encoded. This strategy may be extended to new-to-nature reactions based on related ArMs: Suzuki-coupling, metathesis and C–H activation33. This may allow to endow mammalian cells with highly versatile catalytic function. We thus believe that this study may offer a novel means to engineer cellular function via highly modular cell-penetrating ArMs.
Synthesis of chemical compounds
Details are collected in the Supplementary Information (Supplementary Figures 8–17 and Supplementary Methods)
Stock solutions of Sav, 1, 2, ArM 2 x ⊂ Sav, and ArM 2 x 5 y ⊂ Sav
Sav-stock solutions (stock A) were prepared in phosphate-buffered saline (PBS) (pH 7.5) or water to yield 800 μM free biotin-binding site (referred to as FBBS). A stock solution (stock B) of the ruthenium complex 1 (2 mM) was prepared in dimethyl sulfoxide (DMSO). A stock solution (stock C) of the ruthenium complex 2 (5 mM) was prepared by mixing [CpRu(NCCH3)3](PF6) 3 (10 mM in DMF) and the biotinylated ligand 4 (Supplementary Figure 9) (10 mM in DMF) in a 1:1 ratio. These stock solutions were freshly prepared for each experiment. The ArM 2 x ⊂ Sav was prepared using the conditions listed in Supplementary Tables 1–3, respectively. Stock C was incubated with water for 10 min prior to the addition of stock A. The ArM 2 x 5 y ⊂ Sav was prepared using the conditions collected in Supplementary Tables 4–9. After mixing the ArM 2x ⊂ Sav and water, CPD 5 was added and incubated for 2 h.
Screening Sav for the uncaging of AT 3 6
Prior to Sav mutant screening, potassium isocyanoacetate was tested as an irreversible inhibitor for the catalytic activity of the ruthenium complexes 1, 2 and ArM 22 ⊂ Sav (see Fig. 3 and Supplementary Figure 1). Allyl carbamate caged amino-coumarin 13 (see Supplementary Figure 18a) was used as a substrate. The reaction conditions are collected in Supplementary Table 10. Experiments were performed at 37 °C in a 96-well plate. The fluorescence intensity at 450 nm derived from the produced 7-amino-4-methylcoumarin 14 (excitation at 375 nm) was monitored with a Tecan Infinite M1000 Pro (Supplementary Figure 18b). Potassium isocyanoacetate was found to efficiently inhibit the catalytic activity of ruthenium complexes 1, 2 and ArM 22 ⊂ Sav. Based on this, potassium isocyanoacetate was added to the reaction mixture to quench the reaction during the genetic optimization of the ArM’s activity. For the screening of Sav variants, AT3 6 was used as a substrate. Reaction conditions are listed in Supplementary Table 11 and were performed at 37 °C in an HPLC vial. Potassium isocyanoacetate (500mM in water, 4 μL), tryptophanamide hydrochloride (10mM in water, 20μL) as an internal standard, acetonitrile (800μL), and PBS (400 μL) were added to the reaction mixture. The resulting solution was centrifuged (10,000g) and analyzed by UPLC-MS (Supplementary Figure 19). TONs were determined based on the calibration curve of T3 7 (Supplementary Figure 20).
Cell culture and transfection
The following three-cell culture media were prepared: medium A [Dulbecco’s modified eagle medium (DMEM; Invitrogen) containing 10% (v/v) fetal bovine serum (FBS; Sigma-Aldrich), 1% (v/v) penicillin/streptomycin (PS) solution (Sigma-Aldrich)], medium B [DMEM containing 1% (v/v) PS], medium C [DMEM containing 5% (v/v) charcoal stripped FBS (Gibco), 1% (v/v) PS]
Daily cell culture: HEK-293T cells (DSMZ: ACC-635) were cultivated in medium A at 37 °C in a humidified atmosphere containing 5% CO2. For serial passage of these cells, 0.05% Trypsin-EDTA (Gibco) was used. For HEK-293T cells which we used in this paper, microplasma (−) is guaranteed by the supplier (Online methods, cell culture, and transfection section) (https://www.dsmz.de/catalogues/details/culture/ACC305.html?tx_dsmzresources_pi5%5BreturnPid%5D = 192). Also, we exclusively use cells that are regularly checked for bacterial contamination.
Transfection (Supplementary Table 12): In 10 cm dishes, 1.25 × 105/mL of HEK-293T cells were seeded and cultivated in medium A at 37 °C in a humidified atmosphere containing 5% CO2 during 43 h prior to transfection. To prepare the transfection mix, 19.2 μL of pSP27 (69.9 ng/μL, 1300 ng), 12.5 μL of pYO1 (641 ng/μL, 7800 ng), and 1.7 μL of pSEAP2-control (561 ng/μL, 900 ng) were added to 1 mL of medium B. The resulting solution was mixed with 50 μL of polyethylenimine (PEI, 20000 MW, Polysciences; stock solution 1 mg/mL in dH2O) and incubated for 15 min at ambient temperature. At least 30 min before addition of the prepared DNA-PEI mixture (1 mL) to the cells, the cell culture medium A was replaced by medium C. After 8 h incubation, the cell culture medium was replaced with fresh medium C. The transfected cells were split into a collagen-coated 24-well cell culture plate with a two times diluted concentration and cultivated overnight. The resulting 24-well plates were used for subsequent experiments.
Intracellular catalysis of ArM 2 x 5 y ⊂ Sav and FACS analysis
ArMs 2 x 5 y ⊂ Sav (Supplementary Tables 4–9) were diluted by a factor 50 with medium B. A stock of the ruthenium complex 1 (2 mM in DMSO) was also diluted with medium B to 0.17–2.0 μM. The cell culture medium C of the aforementioned 24-well plate with the designer HEK-293T cells was replaced by media B containing either ArM 2 x 5 y ⊂ Sav or ruthenium complex 1. After 1 h incubation, the cells were washed three times with medium B containing heparin (0.1 mg/mL) to remove cell-surface-adsorbed ArM 2 x 5 y ⊂ Sav as previously reported46. The washed cells were incubated in the medium C containing AM-AT3 8 (4 μM) with 0.5% DMSO for 24 h. Expression of sec-nluc and SEAP was quantified in the supernatant as described in the following section. Then, cells were detached using 0.05% trypsin-EDTA. The cell populations were analyzed using a Becton Dickinson LSRII Fortessa Flow Cytometer (Becton Dickinson) (conditions: filter set for monitoring red fluorescence; 561-nm laser, mirror: 570 LP, Filter: 586/15 BP). Data were analyzed by FlowJo. Populations of living cells (23963 to 25336 events) were extracted from 30,000 events based on SSC and FSC.
Activity assays of SEAP and sec-nluc
SEAP: The supernatant was transferred into a 96-well plate (100 μL/well) and incubated at 65 °C for 30 min to heat-inactivate endogenous alkaline phosphatases. After cooling, 80 μL of the treated supernatant was mixed with 100 μL of 2× SEAP buffer (20 mM homoarginine, 1 mM MgCl2, 21% (v/v) diethanolamine, pH 9.8) and 20 μL of 720 μM of p-nitrophenylphosphate. Immediately thereafter, the absorbance was measured at 405 nm at 37 °C using the EnVision 2104 Multilabel Reader. The measurement was performed over 61 repeats of 30 s/repeat and the plate was shaken for 5 s at 900 rpm at the beginning. From the time-course increase of the absorbance at 405 nm, derived from the enzymatic activity of SEAP, the activity of SEAP (in U/L) was determined. To avoid saturation effects, the linear part of the time-course plots was used for the determination of the slope. The correlation between the slope and the corresponding activity was determined using a standard.
Sec-nluc: The supernatant was transferred into a black 384-well plate (7.5 µL/well), and the same amount of nanoglo assay solution (Promega). After 5 min incubation, the luminescence was measured with Tecan Infinite M1000 Pro.
The authors declare that all data supporting the findings of this study are available either in the paper and in the Supplementary Information or from the authors upon reasonable request.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Bai, Y., Chen, J. & Zimmerman, S. C. Designed transition metal catalysts for intracellular organic synthesis. Chem. Soc. Rev. 47, 1811 (2018).
Martinez-Calvo, M. & Mascarenas, J. L. Organometallic catalysis in biological media and living settings. Coord. Chem. Rev. 359, 57 (2018).
Li, N., Lim, R. K., Edwardraja, S. & Lin, Q. Copper-free Sonogashira cross-coupling for functionalization of alkyne-encoded proteins in aqueous medium and in bacterial cells. J. Am. Chem. Soc. 133, 15316 (2011).
Ritter, C. et al. Bioorthogonal enzymatic activation of caged compounds. Angew. Chem. Int. Ed. 54, 13440 (2015).
Key, H. M., Dydio, P., Clark, D. S. & Hartwig, J. F. Abiological catalysis by artificial haem proteins containing noble metals in place of iron. Nature 534, 534 (2016).
Jeschek, M. et al. Directed evolution of artificial metalloenzymes for in vivo metathesis. Nature 537, 661 (2016).
Renata, H., Wang, Z. J. & Arnold, F. H. Expanding the enzyme universe: accessing non-natural reactions by mechanism-guided directed evolution. Angew. Chem. Int. Ed. 54, 3351 (2015).
Chankeshwara, S. V., Indrigo, E. & Bradley, M. Palladium-mediated chemistry in living cells. Curr. Opin. Chem. Biol. 21, 128 (2014).
Li, J. & Chen, P. R. Development and application of bond cleavage reactions in bioorthogonal chemistry. Nat. Chem. Biol. 12, 129 (2016).
Soldevila-Barreda, J. J. & Sadler, P. J. Approaches to the design of catalytic metallodrugs. Curr. Opin. Chem. Biol. 25, 172 (2015).
Wang, J. et al. Palladium-triggered chemical rescue of intracellular proteins via genetically encoded allene-caged tyrosine. J. Am. Chem. Soc. 138, 15118 (2016).
Streu, C. & Meggers, E. Ruthenium-induced allylcarbamate cleavage in living cells. Angew. Chem. Int. Ed. 45, 5645 (2006).
Yusop, R. M., Unciti-Broceta, A., Johansson, E. M., Sánchez-Martin, R. M. & Bradley, M. Palladium-mediated intracellular chemistry. Nat. Chem. 3, 239 (2011).
Völker, T., Dempwolff, F., Graumann, P. L. & Meggers, E. Progress towards bioorthogonal catalysis with organometallic compounds. Angew. Chem. Int. Ed. 53, 10536 (2014).
Sánchez, M. I., Penas, C., Vázquez, M. E. & Mascareñas, J. L. Metal-catalyzed uncaging of DNA-binding agents in living cells. Chem. Sci. 2014, 1901 (2014).
Tonga, G. Y. et al. Supramolecular regulation of bioorthogonal catalysis in cells using nanoparticle-embedded transition metal catalysts. Nat. Chem. 7, 597 (2015).
Yu, Z., Han, M. L. & Cowan, J. A. Toward the design of a catalytic metallodrug: selective cleavage of G-quadruplex telomeric DNA by an anticancer copper-acridine-ATCUN complex. Angew. Chem. Int. Ed. 54, 1901 (2015).
Soldevila-Barreda, J. J., Romero-Canelon, I., Habtemariam, A. & Sadler, P. J. Transfer hydrogenation catalysis in cells as a new approach to anticancer drug design. Nat. Commun. 6, https://doi.org/10.1038/ncomms7582 (2015).
Tomás-Gamasa, M., Martínez-Calvo, M., Couceiro, J. R. & Mascareñas, J. L. Transition metal catalysis in the mitochondria of living cells. Nat. Commun. 7, https://doi.org/10.1038/ncomms12538 (2016).
Li, S. et al. Copper-catalyzed click reaction on/in live cells. Chem. Sci. 8, 2107 (2017).
Prescher, J. A. & Bertozzi, C. R. Chemistry in living systems. Nat. Chem. Biol. 1, 13 (2005).
Weiss, J. T. et al. Extracellular palladium-catalysed dealkylation of 5-fluoro-1-propargyl-uracil as a bioorthogonally activated prodrug approach. Nat. Commun. 5, https://doi.org/10.1038/ncomms4277 (2014).
Holtzer, L. et al. Nucleic acid templated chemical reaction in a live vertebrate. ACS Cent. Sci. 2, 394 (2016).
Miller, M. A., et al. Nano-palladium is a cellular catalyst for in vivo chemistry. Nat. Commun. 8, https://doi.org/10.1038/ncomms15906 (2017).
Tsubokura, K. et al. In vivo gold complex catalysis within live mice. Angew. Chem. Int. Ed. 56, 3579 (2017).
Li, J. et al. Palladium-triggered deprotection chemistry for protein activation in living cells. Nat. Chem. 6, 352 (2014).
Zhang, G. et al. Bioorthogonal chemical activation of kinases in living systems. ACS Cent. Sci. 2, 325 (2016).
Keasling, J. D. Manufacturing molecules through metabolic engineering. Science 330, 1355 (2010).
Kojima, R., Aubel, D. & Fussenegger, M. Toward a world of theranostic medication: programming biological sentinel systems for therapeutic intervention. Adv. Drug Deliv. Rev. 105, 66 (2016).
Kojima, R., Aubel, D. & Fussenegger, M. Novel theranostic agents for next-generation personalized medicine: small molecules, nanoparticles, and engineered mammalian cells. Curr. Opin. Chem. Biol. 28, 29 (2015).
Auslander, S., Auslander, D. & Fussenegger, M. Synthetic biology—the synthesis of biology. Angew. Chem. Int. Ed. 56, 6396 (2017).
Wilson, M. E. & Whitesides, G. M. Conversion of a protein to a homogeneous asymmetric hydrogenation catalyst by site-specific modification with a diphosphinerhodium(I) moiety. J. Am. Chem. Soc. 100, 306 (1978).
Schwizer, F. et al. Artificial metalloenzymes: reaction scope and optimization strategies. Chem. Rev. 118, 142 (2018).
Song, W. J. & Tezcan, F. A. A designed supramolecular protein assembly with in vivo enzymatic activity. Science 346, 1525 (2014).
Hsu, H. T., Trantow, B. M., Waymouth, R. M. & Wender, P. A. Bioorthogonal catalysis: a general method to evaluate metal catalyzed reactions in real time in living systems using a cellular luciferase reporter system. Bioconjugate Chem. 27, 376 (2016).
Heinisch, T. & Ward, T. R. Artificial metalloenzymes based on the biotin-streptavidin technology: challenges and opportunities. Acc. Chem. Res. 49, 1711 (2016).
Wilson, Y. M., Durrenberger, M., Nogueira, E. S. & Ward, T. R. Neutralizing the detrimental effect of glutathione on precious metal catalysts. J. Am. Chem. Soc. 136, 8928 (2014).
Saxena, P., Charpin-El Hamri, G., Folcher, M., Zulewski, H. & Fussenegger, M. Synthetic gene network restoring endogenous pituitary-thyroid feedback control in experimental Graves’ disease. Proc. Natl. Acad. Sci. USA 113, 1244 (2016).
Gasparini, G. et al. Cellular uptake of substrate-initiated cell-penetrating poly(disulfide)s. J. Am. Chem. Soc. 136, 6069 (2014).
Derivery, E., Bartolami, E., Matile, S. & Gonzalez-Gaitan, M. Efficient delivery of quantum dots into the cytosol of cells using cell-penetrating poly(disulfide)s. J. Am. Chem. Soc. 139, 10172 (2017).
Qian, L. et al. Intracellular delivery of native proteins facilitated by cell-penetrating poly(disulfide)s. Angew. Chem. Int. Ed. 57, 1532 (2018).
Hennemann, G. et al. Plasma membrane transport of thyroid hormones and its role in thyroid hormone metabolism and bioavailability. Endocr. Rev. 22, 451 (2001).
Izumi, S., Urano, Y., Hanaoka, K., Terai, T. & Nagano, T. A simple and effective strategy to increase the sensitivity of fluorescence probes in living cells. J. Am. Chem. Soc. 131, 10189 (2009).
Miyamoto, T. et al. Rapid and orthogonal logic gating with a gibberellin-induced dimerization system. Nat. Chem. Biol. 8, 465 (2012).
Xie, M. et al. β-cell-mimetic designer cells provide closed-loop glycemic control. Science 354, 1296 (2016).
Gasparini, G. & Matile, S. Protein delivery with cell-penetrating poly(disulfide)s. Chem. Commun. 51, 17160 (2015).
The authors thank P. Saxena for providing the plasmids. The authors thank the Swiss National Science Foundation for generous funding via the NCCR Molecular Systems Engineering. Additional funding was provided by an ERC (the DrEAM) to T.R.W., the NCCR Chemical Biology to S.M., a JSPS Overseas research fellowship to Y.O., Human Frontier Science Program (HFSP) long-term postdoctoral fellowship to R.K. and the Universities of Basel and Geneva, and ETH Zurich.
Electronic supplementary material
About this article
Communications Chemistry (2018)