Abstract
Biopolymer composite cell walls maintain cell shape and resist forces in plants, fungi and bacteria. Peptidoglycan, a crucial antibiotic target and immunomodulator, performs this role in bacteria. The textbook structural model of peptidoglycan is a highly ordered, crystalline material. Here we use atomic force microscopy (AFM) to image individual glycan chains in peptidoglycan from Escherichia coli in unprecedented detail. We quantify and map the extent to which chains are oriented in a similar direction (orientational order), showing it is much less ordered than previously depicted. Combining AFM with size exclusion chromatography, we reveal glycan chains up to 200 nm long. We show that altered cell shape is associated with substantial changes in peptidoglycan biophysical properties. Glycans from E. coli in its normal rod shape are long and circumferentially oriented, but when a spheroid shape is induced (chemically or genetically) glycans become short and disordered.
Similar content being viewed by others
Introduction
Peptidoglycan consists of periodic glycan copolymers (N-acetyl glucosamine and N-acetyl muramic acid, Supplementary Fig. 1b) covalently cross-linked by bonds between peptides (often tetra- or penta-peptides, e.g. l-Ala, d-Glu, meso-DAP, d-Ala, d-Ala, Supplementary Fig. 1c). Polymerisation of sugars is catalysed by enzymes known as penicillin-binding proteins (PBPs) and “SEDS” proteins1. Peptide cross-links are catalysed by PBPs. Other families of enzymes (hydrolases) break bonds allowing cell shape to be dynamic2. The core polymer structural motif is broadly conserved across the bacteria; however, great variation in amino acid composition, degree of cross-linking, glycan chain length and chemical modifications (e.g. acetylation) has been revealed via extensive biochemical studies3. Information on how the glycan chains are arranged relative to each other is much more limited. AFM provides high signal-to-noise imaging of individual biomolecules at the nanoscale4 but despite considerable effort, chains have not previously been visualised in polymer networks5,6,7,8,9,10.
The E. coli cell-wall peptidoglycan is both a single macromolecule (sacculus) and a minimal structural material—essentially a two-dimensional polymer network thought to account for most of its mechanical properties3. This makes it an excellent model material to study. The qualitative structural model adopted by textbooks and used as the basis for simulations of the polymer envelope11,12 is that glycan chains run circumferentially around the cylindrical part of the cell and in the same direction at the poles. The measured directional anisotropy in the “Elastic Modulus” of the material is explained as a result of the circumferentially oriented glycans being stiffer than the longitudinally oriented peptide cross-links9. As the field moves from conceptual descriptions of how the peptidoglycan polymer envelope fulfils its “physical” roles of maintaining shape and resisting force to sophisticated computational simulations13,14, allowing detailed predictions of polymer dynamics and interactions with other constituents of the cell, there is a necessity for experimental data on which to build an increasingly accurate physical description of the material.
In this study, we made use of AFM to visualise entire and fragments of peptidoglycan sacculi from E. coli. We directly observed glycan chains in these, and developed a method to quantify the extent to which they are oriented in the same direction. This was used to show that glycan chain orientation is similar in the poles and the cylindrical part of E. coli. We observed very long chains in our images, and confirmed this finding by isolating and purifying chains from peptidoglycan and measuring them by AFM. Finally, we applied our methods to peptidoglycan from spheroid E. coli (produced by chemical and genetic means) showing that these have shorter glycan chains and much reduced chain orientational order compared to the wild-type rods.
Results
Direct visualisation of glycans in the peptidoglycan polymer
Extensive AFM studies of isolated peptidoglycan5,6,7,8,9 prior to this had failed to resolve glycan chains, a critical step in enabling understanding of how the polymer network performs its function. We therefore developed new approaches to sample preparation and imaging ultimately allowing glycans to be seen.
We extracted peptidoglycan polymer envelopes (sacculi) from E. coli (MG1655)7, prior to immobilisation on a mica support coated with poly-l-ornithine, without drying at any point. We used standard biochemical purification methods, established over decades. These may appear “harsh”, but do not degrade peptidoglycan, the structure of which is mainly determined by covalent bonds between sugars and peptides.
We made both intact sacculi and sacculus fragments, generated by sonication. E. coli sacculus fragments have previously been imaged by TEM15 and AFM7. Sacculi break apart in a predictable way, with cracks forming around the circumferential axis of E. coli cells7,15. We found that intact sacculi were less stable than single leaflet fragments under these conditions and could not be imaged (Supplementary Fig. 2a, b). We tested several imaging buffers including 10 mM MES (pH 6, Supplementary Fig. 2c, d) and 10 mM CAPS (pH 10, Supplementary Fig. 2e, f). The addition of salt (KCl) to the buffer caused the peptidoglycan to detach from the surface.
Optimal imaging was obtained with 10 mM Tris (pH 8) (Fig. 1a–d; Supplementary Fig. 1). Firm attachment of the polymer to the substrate was critical for successful imaging16. The regions that appear as white patches in 2D representations of the data (e.g. Supplementary Fig. 1e) or as yellow–green–white raised areas in 3D representations (Fig. 1b) are relatively higher than their surroundings and may indicate a small number of chains that were not fully resolved.
Polymer envelope imaging revealed some features with a spacing of 2.7 nm (s.d. 0.5 nm, n = 19) consistent with historically predicted values for that between glycan chains (1–4 nm17, Supplementary Fig. 1c). We measured well resolved chains to be 1.4 nm wide at full width half maximum (s.d. 0.4 nm, n = 38). These features had lengths in excess of 10 nm, much too long to be peptide cross-linkers. Densities ≈4 nm in diameter previously observed by electron cryo-tomography (ECT)18 had been attributed to glycan chains. It is possible, however, that these were multiple parallel chains.
The extent to which Gram-negative peptidoglycan can be multi-layered or of variable thickness is debated in the literature. ECT data suggest a single layer18, contradicting an earlier neutron scattering study19, which reported 75–80% of the surface was single-layered. Very recent work invokes variable peptidoglycan thickness to explain response to externally applied stresses20. Our data show that although the polymer is generally a single glycan chain thick, some chains overlap each other (Fig. 1d; Supplementary Fig. 1h), indicating that variation in thickness/areal density is possible. Overlapping strands will pertain to the mode of synthesis that we have previously hypothesised whereby areal growth requires both synthesis of material and subsequent hydrolysis to allow wall expansion21. Extraordinarily, glycan chains apparently longer than the maximum literature value (60 nm)22 were seen (Fig. 1c; Supplementary Fig. 1g, h), although we could not locate chain ends for our own measurements within the polymer envelope fragments—this was likely due to tip-induced or thermal motion of the strand ends.
Glycan orientational order is quantifiable
All previous studies of peptidoglycan have been restricted to qualitative descriptions of polymer organisation. We investigated several approaches to quantification of the network, before developing a bespoke analytical method achieving statistically meaningful comparisons of peptidoglycan architecture. This would not have been possible without our new chain imaging capability.
We did not observe a regular, crystalline arrangement of features in our images. This was confirmed by Fourier transforms which revealed no distinct spots which could be assigned to a regular, long-range, periodic spacing of the glycan chains (Supplementary Fig. 1i). Despite the absence of peaks in our Fourier transforms, the shape of the somewhat elliptical central spot (Supplementary Fig. 1i) suggested some orientational order, but the nature of contrast in AFM is not particularly compatible with a simple Fourier transform approach. We therefore developed a means of parameterising orientational order by generating an angular histogram of gradient orientations in our images and then fitting an ellipse to this (Fig. 2a, b). We defined the ratio of the long to the short axes of the ellipse as the orientational order parameter. An image with randomly oriented linear features is expected to have an orientational order parameter of ~1, which is the lowest possible value (see simulations, Supplementary Fig. 5). This approach gave a mean orientational order parameter for our experimental data of 1.6 (s.d. 0.1, n = 6). The method is simple and tolerant of AFM image noise and the nature of contrast at high resolution. Results were similar when an image was split into sub-regions and analysis carried out on each of these to yield a map of local orientational order (Supplementary Fig. 6) suggesting this parameter is fairly uniform—the mean value in the given example was 1.7 (s.d. 0.1, n = 16 sub-regions). It is the increased resolution in our current study (substantially improving on our previous work7) that has permitted us to determine this statistic. We used a segmentation-based approach to determine pore area distributions (Fig. 2c). This revealed pores up to 66 nm2 in area (although most pores were less than 5 nm2) supporting models of peptidoglycan biosynthesis requiring contact between inner and outer-membrane proteins through the polymer network7,23,24.
Glycan chain orientational order is pervasive
Rod shape in E. coli is dependant on correctly functioning MreB multi-protein filaments25, which move circumferentially around the internal surface of the inner cell membrane in a manner dependent on insertion of new peptidoglycan polymer26. MreB is linked to a proposed multi-enzyme nano-machine (elongasome), which spans the inner membrane such that catalytic enzymes can form bonds between new monomers and the pre-existing polymer. Much remains to be learned about how this process works—it is modulated by local surface curvature27 and Lpo cofactors in the outer-membrane, which promote catalysis on contact with enzymes and may have a role in regulating peptidoglycan thickness23,24. We have previously proposed that regions of more porous peptidoglycan are more permissive for insertion of new material7. Cell poles are made during division in a process that does not involve MreB, but instead a similar trans-membrane system (divisome) involving the prokaryotic tubulin homologue FtsZ, which also moves circumferentially relative to the long axis of the cell28,29. In rod-shaped E. coli with a radius of 0.5 μm and a length of 2 μm, the percentage of the cylindrical surface area to the pole surface area, and thus an estimate of the amount of material contributed by the elongasome is 75% compared with 25% by the divisome, based on: \(100\% = S_{{\mathrm{cylinder}}} + S_{{\mathrm{poles}}} = \displaystyle{\frac{l}{{\frac{4}{3}r + l}}} + \displaystyle{\frac{{\frac{4}{3}r}}{{\frac{4}{3}r + l}}}\). Thus, most of the peptidoglycan is contributed by processes involving MreB, suggesting it might provide the link between peptidoglycan biosynthesis, architecture and cell morphology.
By developing a novel fixation protocol, we were able to stabilise the two leaflets of peptidoglycan in an intact polymer envelope sufficiently to image peptidoglycan from the cell poles (Fig. 2d–f; Supplementary Fig. 7a–f) and also the cylindrical part of the cell (Fig. 2g–i). This revealed that the poles had a similar chain organisation to the rest of the cell surface (without a statistically significant difference in orientational order (Supplementary Fig. 8a)) and apparent long glycan chains. This shows that peptidoglycan is structurally similar over the entire surface of the E. coli cell, even though the poles and the cylindrical part of the cell are biosynthesised by different sets of nano-machinery. It is striking that although in the cylindrical part of the cell glycan chains tend to be aligned with the direction of maximum stress, this is not the case in the hemispherical poles (where stress is directionally isotropic). Chain direction may be more a result of an evolutionary drive to efficiently create a rod shape than to create a material that resists anisotropic forces.
It is important to note that turgor-induced forces lead to stretching of peptidoglycan along the longitudinal axis of the cell in vivo18,30, and perhaps circumferentially also31,32. However, we would not expect shear stresses, or other more complex stress patterns to emerge. There is no substantial difference to overall chain orientation in a sacculus as compared to a living cell. There are, however, likely to be differences in chain spacing. Furthermore, organisation may be locally altered as strain varies across the network, e.g. a very porous region might enlarge more than a very dense region under turgor.
E. coli peptidoglycan contains long glycan chains
Final glycan chain length depends on the activity of glycosyltransferases that catalyse addition of new disaccharide monomers to the strands and peptidoglycan hydrolases that catalyse chain breaks. Chain length is also an important input into models and simulations of the cell wall.
To investigate the elongated features we observed in the extant peptidoglycan polymer envelope, we radiolabelled glycan strands with [14C]-GlcNAc and digested purified peptidoglycan sacculi with ATL amidase33 (which separates the glycans and peptides). Next, we used gel filtration chromatography to investigate the size distribution of glycan strands5,21 (Fig. 3a). Overall, 66% of radioactive material eluted before a 100 kDa calibration standard (equivalent to a chain length of about 200 nm). Glycan chains from a high molecular weight fraction (Fig. 3a) were imaged directly by AFM (Fig. 3b) and were observed to be up to 200 nm in length, far higher than when measured previously by reverse-phase HPLC22 which cannot directly measure high molecular weight material. This is the first observation of such long glycan chains in peptidoglycan from E. coli or any similar (Gram-negative) bacteria. A low estimate of the distances over which MreB moves (~200 nm26) are similar to the length of the longer glycan strands we observed by AFM. We confirmed peptidoglycan digestion by ATL amidase using reversed-phase liquid chromatography coupled to mass spectrometry (RP-LC–MS). This showed that ATL amidase treatment led to a three orders of magnitude reduction in cross-links (Fig. 3c; Supplementary Fig. 2) indicating highly efficient removal of contaminating cross-linked material.
Rod shape relates to long, orientationally ordered glycans
Bacteria adopt a broad range of shapes34 and a major assumption in the field is that different cell shapes require altered glycan chain organisation. To test this we generated E. coli cells that were approximately spherical by inhibiting MreB polymerisation with A2235 or using a mutant lacking the gene encoding MreB36 (Fig. 4a, b), and analysed peptidoglycan polymer characteristics. Cells lacking functional MreB did not have a “minicell” phenotype, i.e. they were not two poles (made by the FtsZ-mediated divisome machine) stuck together37 as they had substantially larger diameters (>2 μm) than that of rod-shaped E. coli (~1 μm). The polymer networks from E. coli with altered shape had lost orientational order (Fig. 4c, d; Supplementary Fig. 8): Evidence that the micron-scale morphological features of E. coli depend on the nanoscale organisation of the peptidoglycan polymer envelope. Lack of functional MreB also led to a concomitant reduction in glycan strand length with=32% of radioactive material eluted before a 100 kDa calibration standard for bacteria grown in media containing 10 μg/ml A22 (Fig. 4e), 36% for the strain lacking the gene encoding MreB (Fig. 4f), compared with 66% for wild-type/untreated. Interestingly, A22 has previously been found to reduce glycan chain length in a different species of bacteria: Caulobacter crescentus38, without resolving very high molecular weight material. With mutated mreC, Bacillus subtilis has much shorter glycan chains5. We propose that disruption of systems directing peptidoglycan synthesis will generally result in reduced glycan chain length. As we have shown here that glycan chain lengths can vary greatly without leading to the death of cells, the same is not true for pore sizes which were similar for “rod” and “sphere” shaped E. coli (Supplementary Fig. 9). Excessively large pores would likely cause major problems for the integrity of the polymer envelope.
Without functional MreB, E. coli cells are still able to biosynthesize peptidoglycan permitting cellular enlargement. This may involve components of the elongasome and/or divisome working independently of MreB. We propose that this less well oriented monomer addition involves lower processivity of enzymatic catalysis of glycosidic bonds, leading to shorter glycan chains. This makes the polymer more mechanically isotropic and less able to maintain a rod shape with associated loss of polarity and chains being inserted at a greater range of angles. It has recently been discovered that in B. subtilis MreB orients along the direction of greatest membrane curvature39—locally establishing and maintaining rod shape (via the elongasome). This provides insight into the underlying molecular mechanism by which peptidoglycan with varying degrees of orientational order can be synthesised.
Discussion
As we have shown here, direct visualisation of chain arrangement in a complex biopolymer network provides new insights into how such materials perform essential functions within a cell. Rod-shaped E. coli is characterised by long glycan chains and more ordered peptidoglycan, whereas spheroid shaped E. coli has shorter chains that are significantly less ordered (Fig. 5). In future, we envisage our new methodology can be applied to investigate polymer network organisation in a large number of important biological samples (including different species of bacteria, plants and fungi) and bio-inspired nanostructures, and connect this to material function.
Methods
Growth of bacteria
Bacteria (E. coli MG1655 [kindly provided by Jeff Green] or MC1000 ΔmreB [kindly provided by Kenn Gerdes]) were grown in lysogeny broth (supplemented with 10 μg/ml A22 where stated) at 37 °C with agitation at 200 rpm.
Purification of peptidoglycan polymer envelopes
Peptidoglycan “sacculi” were purified using established methods40. Briefly, cells were grown to exponential phase and killed by boiling in SDS solution. The SDS was then washed out by ultracentrifugation before treatment with trypsin (protease), further boiling in SDS and washing.
The SDS treatment frees peptidoglycan from many of the other constituents of the bacterial cell. Peptidoglycan is not a protein, so this does not cause refolding problems. Trypsin does not affect peptidoglycan, but digests any protein bound to it that might otherwise obscure the material of interest.
For 14C-labelled peptidoglycan, N-acetyl[14C]glucosamine ([14C]GlcNAc) was added to the culture medium, as previously described21.
Mounting of polymer envelopes for AFM imaging
Mica discs were mounted on steel stubs and cleaved to reveal a clean, flat substrate. Then a drop of poly-l-ornithine (3 μg/ml in water) was pipetted onto this, before the surface was washed three times with water.
Poly-l-ornithine (and poly-l-lysine) have been used extensively for immobilising cells and biomolecules (e.g. DNA) for high resolution imaging. The forces between poly-l-ornithine and peptidoglycan are highly unlikely to be strong enough to disrupt the organisation of the peptidoglycan itself, which is mainly determined by covalent bonds between peptides and sugars.
After poly-l-ornithine treatment, a drop of peptidoglycan suspension at a previously determined working concentration (determined empirically for each batch) in 10 mM Tris (pH 8) was added to the substrate and incubated for 3 minutes, without allowing it to dry. This was then washed three times with 10 mM Tris (pH 8).
To image pole/cylinder peptidoglycan, the samples were subsequently incubated in 2.5% (w:v) glutaraldehyde in water (10 min) and then washed a further three times before imaging.
Glutaraldehyde cross-links amine groups which are present in the diaminopimelic acids of the peptidoglycan cross-link peptides and are abundant in the poly-l-ornithine. The result is that the peptidoglycan becomes more tightly bound to the substrate and itself, allowing double leaflets to be imaged.
The samples were not allowed to dry out at any time.
AFM imaging of polymer envelopes
Imaging was carried out using a Bruker Dimension FastScan AFM using FastScan-D probes (Bruker—nominal k = 0.25 N/m, nominal cantilever length = 16 μm) in “Tapping Mode” (Amplitude Modulated Intermittent Contact Mode) driven at ~110 kHz with a free amplitude of ~1 nm.
All imaging of polymer envelopes (sacculi) was carried out in liquid (buffer) without drying at any point.
Purification of glycan strands
Peptidoglycan was digested using recombinant ATL amidase or Cellosyl, as previously described21. Briefly, 14C-labelled peptidoglycan was purified as described above. It was then reacted overnight at 37 °C with at least 10× the amount of enzyme previously determined to be required to completely digest the substrate. The resulting mixture was then boiled for 10 min to deactivate the enzyme, before centrifugation to remove denatured enzyme. Samples were stored at −20 °C until required, if not used immediately.
Size exclusion chromatography
This was carried out as previously described21. Approximately 50,000 cpm of radiolabelled peptidoglycan was injected in a volume of 50 μl onto a TSKgel G 4000 SW column (l = 300, d = 7.5 mm) which had previously been equilibrated in sodium phosphate buffer (100 mM, pH 6). Flow rate was 0.3 ml/min. Radioactivity was detected using a β-RAM (LabLogic) flow scintillation counter equipped with a 100 μl cell and running a 1:1 sample:scintillation cocktail mix. Calibration was carried out using dextran standards.
To extract strands for AFM imaging, unlabelled material was injected and the eluent collected rather than being directed to the β-RAM. The elution buffer in this case was 10 mM sodium phosphate (pH 2).
AFM imaging of glycan strands
Material collected by size exclusion chromatography was diluted to an appropriate working concentration (determined empirically for each batch) in water. A drop was applied to mica and then immediately dried with flowing nitrogen.
Imaging of glycan strands was carried out in air using a Bruker Dimension FastScan AFM with TESPA-V2 probes (Bruker—nominal k = 37 N/m, nominal cantilever length = 123 μm) in “Tapping Mode” (Amplitude Modulated Intermittent Contact Mode) driven at ~320 kHz. No other AFM in this study was carried out in air.
Peptidoglycan structural analysis by LC–MS
Sacculi (or glycan chains) were digested with cellosyl, boiled to deactivate enzyme and then reduced with sodium borohydride as previously described5. The resulting soluble material was separated by reverse-phase high-performance liquid chromatography (RP-HPLC) using a Hypersil aQ C18 column (3 μm, 2.1 by 200 mm) coupled to an Agilent 6500 series quadrupole time of flight mass spectrometer (Q-TOF LC–MS). Flow rate was 0.15 ml/min. Buffer A was water and buffer B was acetonitrile, both containing 0.1% (v:v) formic acid. The gradient was 0 to 15% buffer B over 35 min.
Gradient orientation analysis of orientational order
This was achieved using a combination of the Gwyddion open source software and custom Matlab scripts. Images were “line flattened” and a plane fitted and subtracted using Gwyddion (http://gwyddion.net). Data was loaded into Matlab and downsampled 0.5-fold such that four pixels in the parent image were averaged to a single pixel (this further reduced the influence of scan line noise on the subsequent analysis). This image was then numerically differentiated with respect to x and y yielding two matrices from which a gradient vector could be determined at each pixel. A polar histogram of gradient orientations was then plotted and an ellipse fitted to it. We defined the ratio of the long to the short axis of the ellipse as the orientational order parameter.
Simulation of test images
Linear features were generated with random start points, fixed lengths and a distribution of angular orientations of a defined standard deviation. This image was convolved with a Gaussian kernel to simulate tip convolution. To the result we added “scan line noise” where each horizontal line was given a random offset drawn from a normal distribution, and Gaussian noise. The intention was not to physically simulate the AFM and the unique interaction between peptidoglycan and the AFM probe, but to validate our image analysis methods.
Determination of pore statistics
An adaptive threshold was applied to images to identify pores (Matlab implementation of Bradley’s method41). The resulting binary images were then morphologically filled and then opened to remove regions of four or less pixels (to set a minimum definition of pore size).
Optical microscopy
Bacteria were fixed with paraformaldehyde, as previously described7, then mounted on an agarose pad before imaging with a Nikon Ti Eclipse inverted optical microscope in phase contrast mode.
Code availability
The code used in this study is available from the corresponding author on request.
Data availability
The data supporting the findings of the study are available in this article and its supplementary information files, or from the corresponding author on request.
References
Meeske, A. J. et al. SEDS proteins are a widespread family of bacterial cell wall polymerases. Nature 537, 634–638 (2016).
van Heijenoort, J. Peptidoglycan hydrolases of Escherichia coli. Microbiol. Mol. Biol. Rev. 75, 636–663 (2011).
Turner, R. D., Vollmer, W. & Foster, S. J. Different walls for rods and balls: the diversity of peptidoglycan. Mol. Microbiol. 91, 862–874 (2014).
Dufrêne, Y. F. et al. Imaging modes of atomic force microscopy for application in molecular and cell biology. Nat. Nanotechnol. 12, 295–307 (2017).
Hayhurst, E. J., Kailas, L., Hobbs, J. K. & Foster, S. J. Cell wall peptidoglycan architecture in Bacillus subtilis. Proc. Natl Acad. Sci. USA 105, 14603–14608 (2008).
Turner, R. D. et al. Peptidoglycan architecture can specify division planes in Staphylococcus aureus. Nat. Commun. 1, 26 (2010).
Turner, R. D., Hurd, A. F., Cadby, A., Hobbs, J. K. & Foster, S. J. Cell wall elongation mode in Gram-negative bacteria is determined by peptidoglycan architecture. Nat. Commun. 4, 1496 (2013).
Wheeler, R., Mesnage, S., Boneca, I. G., Hobbs, J. K. & Foster, S. J. Super-resolution microscopy reveals cell wall dynamics and peptidoglycan architecture in ovococcal bacteria. Mol. Microbiol. 82, 1096–1109 (2011).
Yao, X., Jericho, M., Pink, D. & Beveridge, T. Thickness and elasticity of gram-negative murein sacculi measured by atomic force microscopy. J. Bacteriol. 181, 6865–6875 (1999).
Dover, R. S., Bitler, A., Shimoni, E., Trieu-Cuot, P. & Shai, Y. Multiparametric AFM reveals turgor-responsive net-like peptidoglycan architecture in live streptococci. Nat. Commun. 6, 7193 (2015).
Huang, K. C., Mukhopadhyay, R., Wen, B., Gitai, Z. & Wingreen, N. S. Cell shape and cell-wall organization in Gram-negative bacteria. Proc. Natl Acad. Sci. USA 105, 19282–19287 (2008).
Nguyen, L. T., Gumbart, J. C., Beeby, M. & Jensen, G. J. Coarse-grained simulations of bacterial cell wall growth reveal that local coordination alone can be sufficient to maintain rod shape. Proc. Natl Acad. Sci. USA 112, E3689–E3698 (2015).
Gumbart, J. C., Beeby, M., Jensen, G. J. & Roux, B. Escherichia coli peptidoglycan structure and mechanics as predicted by atomic-scale simulations. PLoS. Comput. Biol. 10, e1003475 (2014).
Furchtgott, L., Wingreen, N. S. & Huang, K. C. Mechanisms for maintaining cell shape in rod-shaped Gram-negative bacteria. Mol. Microbiol. 81, 340–353 (2011).
Verwer, R. W., Beachey, E. H., Keck, W., Stoub, A. M. & Poldermans, J. E. Oriented fragmentation of Escherichia coli sacculi by sonication. J. Bacteriol. 141, 327–332 (1980).
Leung, C. et al. Atomic force microscopy with nanoscale cantilevers resolves different structural conformations of the DNA double helix. NanoLetters 12, 3846–3850 (2012).
Braun, V., Gnirke, H., Henning, U. & Rehn, K. Model for the structure of the shape-maintaining layer of the Escherichia coli cell envelope. J. Bacteriol. 114, 1264–1270 (1973).
Gan, L., Chen, S. & Jensen, G. J. Molecular organization of Gram-negative peptidoglycan. Proc. Natl Acad. Sci. USA 105, 18953–18957 (2008).
Labischinski, H., Goodell, E. W., Goodell, A. & Hochberg, M. L. Direct proof of a ‘more-than-single-layered’ peptidoglycan architecture of Escherichia coli W7: a neutron small-angle scattering study. J. Bacteriol. 173, 751–756 (1991).
Wong, F. et al. Mechanical strain sensing implicated in cell shape recovery in Escherichia coli. Nat. Microbiol 2, 17115 (2017).
Wheeler, R. et al. Bacterial cell enlargement requires control of cell wall stiffness mediated by peptidoglycan hydrolases. mBio 6, e00660 (2015).
Harz, H., Burgdorf, K. & Höltje, J. V. Isolation and separation of the glycan strands from murein of Escherichia coli by reversed-phase high-performance liquid chromatography. Anal. Biochem. 190, 120–128 (1990).
Typas, A. et al. Regulation of peptidoglycan synthesis by outer-membrane proteins. Cell 143, 1097–1109 (2010).
Paradis-Bleau, C. et al. Lipoprotein cofactors located in the outer-membrane activate bacterial cell wall polymerases. Cell 143, 1110–1120 (2010).
Wachi, M. et al. Mutant isolation and molecular cloning of mre genes, which determine cell shape, sensitivity to mecillinam, and amount of penicillin-binding proteins in Escherichia coli. J. Bacteriol. 169, 4935–4940 (1987).
van Teeffelen, S. et al. The bacterial actin MreB rotates, and rotation depends on cell-wall assembly. Proc. Natl Acad. Sci. USA 108, 15822–15827 (2011).
Ursell, T. S. et al. Rod-like bacterial shape is maintained by feedback between cell curvature and cytoskeletal localization. Proc. Natl Acad. Sci. USA 111, E1025–E1034 (2014).
Yang, X. et al. GTPase activity-coupled treadmilling of the bacterial tubulin FtsZ organizes septal cell wall synthesis. Science 355, 744–747 (2017).
Bisson-Filho, A. W. et al. Treadmilling by FtsZ filaments drives peptidoglycan synthesis and bacterial cell division. Science 355, 739–743 (2017).
Koch, A. L., Lane, S. L., Miller, J. A. & Nickens, D. G. Contraction of filaments of Escherichia coli after disruption of cell membrane by detergent. J. Bacteriol. 169, 1979–1984 (1987).
Pilizota, T. & Shaevitz, J. W. Fast, multiphase volume adaptation to hyperosmotic shock by Escherichia coli. PLoS ONE 7, e35205 (2012).
Rojas, E., Theriot, J. A. & Huang, K. C. Response of Escherichia coli growth rate to osmotic shock. Proc. Natl Acad. Sci. USA 111, 7807–7812 (2014).
Clarke, S. R. et al. Identification of in vivo-expressed antigens of Staphylococcus aureus and their use in vaccinations for protection against nasal carriage. J. Infect. Dis. 193, 1098–1108 (2006).
Young, K. D. The selective value of bacterial shape. Microbiol. Mol. Biol. Rev. 70, 660–703 (2006).
Bean, G. J. et al. A22 disrupts the bacterial actin cytoskeleton by directly binding and inducing a low-affinity state in MreB. Biochemistry 48, 4852–4857 (2009).
Kruse, T., Møller-Jensen, J., Løbner-Olesen, A. & Gerdes, K. Dysfunctional MreB inhibits chromosome segregation in Escherichia coli. EMBO J. 22, 5283–5292 (2003).
Farley, M. M., Hu, B., Margolin, W. & Liu, J. Minicells, back in fashion. J. Bacteriol. 198, 1186–1195 (2016).
Takacs, C. N. et al. MreB drives de novo rod morphogenesis in Caulobacter crescentus via remodeling of the cell wall. J. Bacteriol. 192, 1671–1684 (2010).
Hussain, S. et al. MreB filaments create rod shape by aligning along principal membrane curvature. eLife 7, e32471 (2018).
Turner, R. D., Hobbs, J. K. & Foster, S. J. Atomic force microscopy analysis of bacterial cell wall peptidoglycan architecture. Methods Mol. Biol. 1440, 3–9 (2016).
Bradley, D. & Roth, G. Adaptive thresholding using the integral image. J. Graph. Tools 12, 13–21 (2007).
Acknowledgements
We thank Sandip Kumar, Nicolas Olivier and Nic Mullin for useful discussions, Chris Thoroughgood for providing the ATL amidase enzyme and Simon Thorpe for RP-LC–MS analysis. This work was supported by the BBSRC (BB/L006162/1, BB/N000951/1, BB/L014904/1) and MRC (MR/N002679/1). Optical imaging was done in the Wolfson Light Microscopy Facility and the super-resolution facility in Sheffield was funded by MRC grant MR/K015753/1.
Author information
Authors and Affiliations
Contributions
R.D.T., S.M., J.K.H. and S.J.F. contributed to study design, data analysis and manuscript preparation. R.D.T. and S.M. also carried out experimental work.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Turner, R.D., Mesnage, S., Hobbs, J.K. et al. Molecular imaging of glycan chains couples cell-wall polysaccharide architecture to bacterial cell morphology. Nat Commun 9, 1263 (2018). https://doi.org/10.1038/s41467-018-03551-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-018-03551-y
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.