Crystals formed prior to a volcanic event can provide evidence of processes leading to and timing of eruptions. Clinopyroxene is common in basaltic to intermediate volcanoes, however, its ability as a recorder of pre-eruptive histories has remained comparatively underexplored. Here we show that novel high-resolution trace element images of clinopyroxene track eruption triggers and timescales at Mount Etna (Sicily, Italy). Chromium (Cr) distribution in clinopyroxene from 1974 to 2014 eruptions reveals punctuated episodes of intrusion of primitive magma at depth. Magma mixing efficiently triggered volcanism (success rate up to 90%), within only 2 weeks of arrival of mafic intrusions. Clinopyroxene zonations distinguish between injections of mafic magma and regular recharges with more evolved magma, which often fail to tip the system to erupt. High Cr zonations can therefore be used to reconstruct past eruptions and inform responses to geophysical signals of volcano unrest, potentially offering an additional approach to volcano hazard monitoring.
Arrival of new magma into an existing reservoir is widely acknowledged as a common eruption trigger1,2,3,4,5. Mixing of evolving crystal-melt mushes with primitive, hot, undegassed magma may overcome the physical barriers of melt mobilisation and result in a volcanic eruption at the surface6. However, the mechanisms and efficiency of blending of injected and resident magmas in the reservoir depend on local physical parameters, controlling degrees of melt hybridisation and crystal recycling2,3,7 and ultimately variable success rates in eruption triggering8,9. Eruption triggers can be monitored geophysically, but the timescales from magma recharge to eruption can be very short, on the order of days to a few years6,10,11,12, and the detailed physical pathways from mush rejuvenation to eruption remain largely unconstrained12. Accordingly, a better understanding of the recharge mechanisms, and the pathways and timescales on which these occur are needed to improve eruption forecasting at individual volcanoes.
Mt. Etna is the highest (3340 m) and most active volcano in Europe. It has experienced renewed eruptive activity since the 1970s, attributed to magma replenishment and mixing at depth13,14,15,16,17,18,19. The geochemistry of eruption products implies arrival of a primitive magma rich in volatiles and alkalis and of radiogenic-Sr character, heralding increased eruption frequency, magma output rate, explosivity and seismicity13,14,15,16,17,18,19. The appearance of magma with distinct source characteristics was first proposed from the elemental and isotopic chemistry of erupted lavas13,20,21 and later by study of melt inclusion, mineral and bulk geochemical data, as well as numerical modelling and volcanic gas monitoring14,15,16,17,18,19,22,23,24. However, the exact intrusion trajectory of the new magma through the plumbing system, a complex network of variably connected sill-like storage regions and dykes, remains poorly constrained. Magmas eventually erupt at the summit or drain laterally through the flank. All summit and most flank eruptions are fed by the so-called central conduits—the main magma transport system—but eccentric flank eruptions can tap into deep, undegassed magmas through pathways that bypass the central conduits14,19,23,25.
Early mineral phases hold key information on the architecture of magma plumbing systems. At Mt. Etna, typical products are porphyritic trachybasalts with varying fractions of mm-sized plagioclase, olivine and clinopyroxene crystals all showing growth zoning in response to polybaric crystallisation of the hydrous magma along a vertically extended, highly dynamic plumbing system26,27,28,29,30,31,32. Plagioclase textures and compositions record shallow crystallisation related to degassing (<12 km27). Zoned olivines reflect distinct magma-mush pockets within Etna’s shallow plumbing system (<12 km29,30,31), only rare Mg-rich compositions informing about deeper (≥20 km) parts of the edifice31,32. Clinopyroxene potentially holds a unique further record of magma history, firstly, because it grows across the entire crustal column17,26,28, and secondly, because elemental diffusion is relatively slow33,34, potentially preserving the history of protracted processes35. In this contribution, we used laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) to map trace elemental distributions within clinopyroxene crystals from recent (1974–2014) eruptions at Mt. Etna (Supplementary Tables 1 and 2). Many trace elements are little affected by changes in temperature, pressure and H2O content relative to major elements36, and transition metals can record mafic recharge events as zones of enrichment37.
We combine analysis of the distribution of high-Cr zones in clinopyroxene with thermobarometry to track the appearance and movement of primitive magma in the plumbing system. Our data provide new insights into the links between different areas of the magma reservoir, the timing of magma migration and the association of a new intrusion with increasing eruptive activity over the past four decades.
Although quite homogeneous in major elements, the new trace element maps reveal that Mt. Etna clinopyroxene (titanoaugite) preserves very sharp zoning in the composition of several trace elements, particularly Cr (Fig. 1). Zones rich in Cr are also enriched in other compatible metals (e.g. Ni and Sc) and are relatively poor in incompatible elements such as La, Nd, Zr and Nb (Fig. 1), reflecting growth after arrival of a new primitive magma into the crystallising reservoir38. Chromium maps show the strongest zonation and concentration contrasts. This is likely the result of two factors. Firstly, because Cr is compatible in the clinopyroxene lattice39. More importantly, however, rapid crystallisation of titanomagnetite and clinopyroxene deplete39 the hybrid magma in Cr soon after recharge, leading to the prevalent growth of zones low in Cr abundance. Titanomagnetite is a common inclusion in Etnean clinopyroxenes22,40, where it is typically spatially associated with zones of Cr-enrichment (Fig. 1), supporting the notion of rapid Cr fractionation after mafic recharge. The contrast in Ni concentration in clinopyroxene is less pronounced. This is largely because the hybrid magma is less effectively depleted in Ni due to limited olivine crystallisation (typically restricted to shallow parts of the plumbing system29,30).
Chromium-rich zones up to 103 ppm mostly occur near the rims of clinopyroxenes, suggesting growth shortly before eruption6. This finding indicates a close link between mafic recharge, magma mixing and volcanic eruption. Maps of glomerocrysts often show Cr-rich layers overgrowing entire aggregates of crystals (Supplementary Fig. 1), from which it can be inferred that the glomerocrysts were assembled prior to the recharge event. Chromium-rich rims are relatively enriched in Mg and depleted in Fe (Fig. 2; Supplementary Fig. 2), as expected from mafic replenishment38. The magnitude of the enrichment, however, is much larger in Cr, producing sharper oscillations (Fig. 2; Supplementary Fig. 2). Using clinopyroxene/melt partition coefficients from Etnean hawaiites39, it can be calculated that the melts in equilibrium with Cr-poor cores and Cr-rich rims were distinctly different (Supplementary Fig. 3; Supplementary Table 3). The calculated increase in transition metal concentration and concomitant decrease in rare earth and high-field strength element content are consistent with the arrival of a new primitive magma into the system.
Chromium-rich rims are euhedral and nearly always enclosed within a Cr-poor outermost rim, where Mg and Si decrease and Al and Ti increase sharply (Fig. 2; Supplementary Fig. 2). Aluminium incorporation into the tetrahedral site, accompanied by Ti for charge balance, increases significantly with magma cooling rate. This has been shown in experiments crystallising synthetic Etna basaltic melts41,42 and empirically, both at the chilled margins of dykes and lava flows (ref. 41 and references therein) and in outermost crystal zones formed upon ascent and emplacement of alkaline magmas43. It follows that Cr-poor outermost rims likely record final magma decompression and surface crystallisation.
Clinopyroxene cores are often rich in Na (Supplementary Fig. 2), a typical feature of crystallisation at depth44. The Na-rich cores are subhedral to anhedral, often corroded and show complex zoning patterns, particularly in mildly incompatible elements such as Zr and Nd (Fig. 1). This implies partial resorption of previous (antecryst) cores upon arrival of hotter magma. Importantly, the recycled cores are frequently oscillatory zoned in Cr but at concentrations one order of magnitude lower than the rims (Supplementary Fig. 4). This zonation likely also reflects periodic recharge but with relatively evolved magma, not highly enriched in Cr. This type of recharge can readily be distinguished from the more primitive magma intrusion that gave rise to dramatic Cr-enrichments and triggered magma ascent and eruption. We refer to this primitive magma as the ‘mafic intrusion’.
Tracking the intrusion of mafic magma through time
The 1974 eccentric eruption, which built the Mount De Fiore scoria cones and associated lava fields, represents the first surface expression of the arrival of new primitive magma considered responsible for the on-going era of sustained vigorous volcanic activity13,14,15,19,23. Significantly, in the 1974 eccentric eruption products, 93% of the analysed crystals show the Cr-enrichment (Fig. 3; Supplementary Table 4). High-Cr zones occur at the rim of large antecrysts and glomerocrysts, or in the core of small crystals that likely represent phenocrysts from the final erupted magma (Supplementary Fig. 1). Based on location and chronology of earthquakes45, the 1974 eruption was previously explained with deep tectonic fracturing23, but the new mineral maps unequivocally highlight the role of the mafic intrusion. The compositions of erupted lavas23 plot as hybrids between the compositional melt end-members calculated from the chemistries of distinctive low- and high-Cr zones in clinopyroxene (Supplementary Fig. 3b). The eccentric 1974 products plot towards the Cr-rich end-member, whereas coeval summit (central conduit) lavas plot nearer the Cr-poor end-member. Rubidium and Ba were mapped in selected crystals to test whether the inferred mafic intrusion was alkaline13,23 but no zonation was found, concentrations being close to detection limits (Supplementary Fig. 5).
From the 1974 lavas, we extended clinopyroxene mapping to eruption products as young as 2014 (Fig. 3), working on the premise that Cr-rich growth zones trace arrival of batches of mafic intrusion and permit the reconstruction of its invasion through the plumbing system. Many crystals from the eccentric eruptions in 2001 (82%) and 2002–2003 (68%) show Cr-enrichments equivalent to those found in 1974 crystals, either at antecryst rims or in phenocryst cores. Compared to 1974, antecrysts in 2001 and 2002–2003 grew much bigger, and the Cr-enrichments are found over large, variably resorbed cores. This suggests that by this point, the intruding magma was beginning to replenish more mature and crystalline mushes. In central conduit lavas, by contrast, Cr-rich antecryst rims and phenocryst cores remained rare in 1992 (13% of clinopyroxene crystals), 1999 (6%) and 2002 (5%), and only started increasing in occurrence from 2013 (14%) and more significantly in 2014 (48%) (Fig. 3; Supplementary Table 4). Thus, with time, the mafic intrusion apparently migrated into the central conduits, consistent with lava chemistries of the intensely eruptive period 2001–200546. Additional evidence of increasing mafic intrusion comes from compositional changes in olivine with time. Although overlapping in composition, the range of forsterite (Mg) contents increased from Fo51–78 in pre-1970s products (1669 eruption)30 to Fo65–83 in the period 1991–200829, and to Fo70–84 in the more recent 2011–2013 lavas31.
In central conduit lavas, clinopyroxene typically occurs as glomerocrysts (up to 89% of analysed crystals), contrasting with crystals in eccentric eruptions (16–40%; Supplementary Table 4). The ubiquity of glomerocrysts suggests that the central conduits are host to densely populated mushes, which probably form in response to sustained degassing-related crystallisation27,32,46. Our data show that the mafic intrusion was very efficient at triggering eccentric eruptions but that penetration of the central mush was slower (Fig. 3) and the arrival of batches of primitive magma not as clearly related to eruption. Nonetheless, the progress of the mafic intrusion inferred from the increasing percentage of crystals with high Cr zones matches the accelerating eruptive activity of the volcano and suggests that the central conduit mush became progressively more permeable to repeated injections of the new magma.
In most eruptions, some antecrysts also show Cr-enrichments in intermediate mantle areas (Fig. 2; Supplementary Fig. 6; Supplementary Table 4). These are likely related to older recharge events that failed to trigger eruption or, alternatively, triggered eruption but failed to drag crystals to the surface. Injections of mafic magma could additionally have formed ribbons in blended ambient magma, through which suspended crystals then migrated5,47, producing double (or triple) Cr-enrichments (Fig. 2; Supplementary Fig. 6). Where intermediate zones are corroded, we favour the hypothesis that these crystals could be significantly older witnesses of earlier intrusions, kept in ‘cold storage’11 below the solidus temperature. Judging from the distribution of Cr-rich zones in intermediate mantle areas of clinopyroxene (e.g. Supplementary Fig. 6), crystal storage was more common in the central conduits, probably because mush mobilisation was delayed.
Constraints on the depth of magma intrusion
Clinopyroxene is an early liquidus phase in Etnean magmas and crystallises over a wide range of pressures and high magma water contents17,26,28,32,40. Without a barometric context, the new information on Cr-enrichment cannot be interpreted in terms of magma plumbing architecture and dynamics. Accordingly, we applied thermobarometry44,48 to the crystals that witnessed primitive intrusions to calculate storage depths and reconstruct the appearance and migration of the mafic intrusion through the plumbing system. The resulting crystallisation trajectory (Fig. 4) is polybaric, similar to previous constraints at Mt. Etna17,26. The results confirm that on average, antecryst cores formed at deeper levels (300–900 ± 200 MPa and 1163–1216 ± 25 °C) than Cr-rich rims (200–600 ± 200 MPa and 1148–1200 ± 25 °C). Pressure estimates for central conduit 2014 clinopyroxene are somewhat lower than eccentric 1974 and 2002–2003 eruptions, however, data overlap within uncertainty.
The steep decompression trajectory (Fig. 4) highlights the efficiency of the mafic intrusion in mush mobilisation and eruption triggering. The recharge pathways are consistent throughout 1974–2014 and are in agreement with GPS, seismic and other geophysical data collected over the last decade49. Antecryst cores were entrained as magma travelled from mantle depths through the lower and intermediate crust. Deep intrusion and mush-recycling is consistent with volcano-tectonic seismicity occurring at 10–30 km beneath the western and southern sectors of Mt. Etna, which has been interpreted as episodic magma recharge from depth49.
Crystallisation of clinopyroxene in response to the arrival of mafic magma occurred at depths matching the location of a major aseismic high P-wave velocity body (HVB) detected at 3–18 km50,51,52. This body is the most important feature revealed by seismic tomography and interpreted as a solidified intrusive complex beneath Mt. Etna50,51,52. Recent seismic and deformation data indicate that magmas prevalently rise along the western margin of the HVB and stagnate within and above it, following discontinuities in crustal lithology49,50,51,52,53. Apparent depths of crystallisation of Cr-rich rims are consistent with the prominent ~10 km intra-crustal boundary marking the top of the crystalline basement and the base of the carbonate platform (Fig. 4). Magma storage and periodic magma mixing have previously been pinpointed to similar depths with melt inclusion (10 ± 2 km14,15,23) and mineral data (e.g. <500 MPa32 ~<16 km; 5–8 km28).
Finally, we consider the significance of Cr-poor outermost rims. The most obvious explanation is that they crystallised upon final ascent from the reservoir to the surface (Fig. 4). An alternative explanation would be crystallisation at ~10 km prior to magma mobilisation and eruption. However, Cr-rich rims, Cr-poor outermost rims and groundmass microcrysts define a common evolutionary trend in terms of major element contents, where Al and Ti increase sharply with the decrease in Mg# and Si (Supplementary Fig. 2). This suggests continuous polybaric fractionation of magma under increasing undercooling conditions41,42,43. Therefore, it is likely that Cr-poor overgrowths crystallised with final decompression and degassing, within the shallow crystallisation depth range of olivine and plagioclase (Fig. 4).
Timescales from intrusion to eruption
There is a consistent thickness of Cr-rich rims and Cr-poor outermost rims (53 ± 32 µm and 63 ± 45 µm, respectively, in crystals from eccentric eruptions, accounting for ~11% and 12% of crystal growth). The consistent growth pattern in outermost zones of clinopyroxenes from eruption products spanning 40 years (Supplementary Table 4) may be relevant if the crystallisation of the euhedral rims relates to the time elapsed between recharge, magma mobilisation and eruption. Whereas the bulk of the antecrysts must have grown episodically over protracted timescales, dominated by long periods of storage without growth11, the following analysis works from the reasonable assumption that upon arrival of the eruption-triggering batch of mafic intrusion, crystal growth was continuous.
Etnean clinopyroxene growth rates have been estimated empirically26,54 and experimentally55, converging at a figure on the order of 10–8 cm/s at low degrees of undercooling (<10–20 °C). According to this growth rate, Cr-rich rims are inferred to have formed over ~6 days, reflecting the time elapsed between intrusion and mobilisation (Fig. 5). Subsequently, Cr-poor outermost rims are inferred to have formed over ~7 days, during magma ascent to the surface (Fig. 5). The accuracy of these calculations obviously depends on the veracity of growth rates. It is noted that degassing and high undercooling at shallow levels accelerate crystal growth (for example, ref. 56) and therefore the timescales calculated from the thickness of the outermost rims should be considered maxima. Experimental evidence shows that growth rates of polyhedral crystals can vary by up to one order of magnitude with magma undercooling57. Accordingly, an increase in growth rate up to 10–7 cm/s would translate into minimum timescales for magma ascent of 0.7 days. Higher undercooling would produce clinopyroxene with hopper to dendritic morphologies41,57, which are not observed in these Etnean lavas. It is also noted that magma temperature during transport could drop below the clinopyroxene solidus, causing the opposite effect. The euhedral shape of rims and outermost rims supports continuous crystallisation at relatively low undercooling, without further resorption.
If the clinopyroxene growth timescale estimates are accurate, they imply maximum recharge to eruption timescales of only 2 weeks (Fig. 5). Similarly short recharge-to-eruption timescales were calculated independently with olivine diffusion chronometry29 for eccentric eruptions and mafic injections recorded by forsterite-enrichments. Increased CO2 flux in the days prior to the onset of eruptive activity in 200624 also supports rapid evacuation of magma upon mafic intrusion. These geochemical indicators for short timescales are supported by geophysical evidence (Fig. 6). For example, the significant 1974 seismic crisis on Mt. Etna started only 10 days before the eccentric eruption, the highest seismic energy release and the deepest earthquake being registered, respectively, 9 and 6 days before eruption onset23,45 (Fig. 6). The 2001 eruption was preceded by months of gradual pressure build-up in the shallow plumbing system14, and heralded by 5 days of very intense seismicity, ground deformation and fracturing14,22,25. The somewhat longer timescales obtained for the 2002–2003 eruption (Fig. 5) are in line with the intense pre-eruptive micro-seismicity recorded <2 months prior to eruption and interpreted as precursory deep magma input58.
Considering that Cr-rich clinopyroxene crystallised within the main magma storage zone (Fig. 4) at ~10 km depth (Fig. 4), 7 days of travel imply an ascent rate of 60 m/h. At the high-undercooling end, minimum growth timescales of 0.7 days would translate into ascent rates of 600 m/h. Considering also the uncertainty in thickness measurements (Supplementary Table 4), the clinopyroxene data provide a range of ascent rates of 35–2080 m/h, from mush mobilisation at the main reservoir to eccentric eruption. Previous estimates at Etna vary widely but indicate fastest average ascent at shallow depths <4 km due to common H2O degassing26,59, on the order of 140–1400 m/h60, 720–2880 m/h55 and 36–1116 m/h40, also in agreement with other volcanic systems around the world (ref. 40 and references therein). Average mantle-to-surface ascent is typically slower (1–10 m/h)26,61 and probably reflects periods of stagnation in the crust62. Our new data highlight that injections of the mafic intrusion are capable of evacuating and transporting magma rapidly, particularly through eccentric eruptions.
Our new analysis shows that Cr zoning in clinopyroxene provides an excellent record of mafic replenishment and magma mixing. Chromium partitions preferentially into clinopyroxene39, where chemical diffusion is relatively slow33,34, enabling preservation of protracted magma histories. Upon mafic recharge into resident mushes, high-Cr clinopyroxene crystallises together with titanomagnetite, driving down the Cr content of the hybrid magma sharply39 and producing pronounced oscillatory zoning (Fig. 1). This explanation for sharp zonation in Cr is supported by petrological modelling with Rhyolite-MELTS63 showing that the 1974 eccentric magma23 with 2 wt% H2O at 200–600 MPa fractionates titanomagnetite and clinopyroxene. Changes in Cr concentration show overall correlations with Mg/Fe; however, when Cr-enrichments occur in the intermediate mantle of the crystal, the Mg–Fe zoning is weak or absent (Fig. 2; Supplementary Fig. 2). Divalent Mg and Fe diffuse faster than trivalent cations64,65 and Mg–Fe zoning can become reset by diffusion and annealing in the course of crystal storage (e.g. at Taupo Volcanic Zone, New Zealand66,67). Trivalent Cr and Al, by contrast, preserve zoning across entire crystals (Fig. 2). Importantly, Cr-enrichments do not correlate with enrichments in other elements that diffuse slowly. For example, Cr-rich zones are poor in Al (Fig. 2; Supplementary Fig. 2). This indicates that episodes of high Cr growth are not due to local enrichment in slow diffusing elements at the liquid boundary layer surrounding rapidly growing clinopyroxene, as has been suggested in other volcanic systems (e.g. at Hawaii68). In plutonic clinopyroxene, Mg–Cr-enrichments have been interpreted to reflect local cooling and oxidation of the magma47. By analysing the Mt. Etna crystals for a range of trace elements, we established positive correlations between Cr and other transition metals and negative correlations with incompatible elements (Fig. 1; Supplementary Fig. 3), supporting the view that Cr-enrichments represent arrival of mafic magma into the plumbing system.
The clinopyroxene record provides new constraints on the pathways and timescales of intrusion of fresh primitive magma into Etna’s plumbing system (Fig. 7). It is well established that the feeder system is constantly buffered to the composition of trachybasalt due to continuous supply and limited differentiation of primary magmas in the upper mantle or lowermost crust26, accompanied by crystallisation of deep Mg-rich olivine and clinopyroxene, which are relatively rarely sampled by Mt. Etna lavas31,32. Our data provide evidence of recycling of evolving clinopyroxene mushes in the lower crust, transported by successive replenishments of primitive magma. Geophysical data highlight a preferred path for rising and accumulating magma in recent eruptions. This pathway lies between the western border of the HVB and the eastern border of a shallow low-velocity zone, itself located beneath the volcano’s southwestern flank and interpreted as a fractured region favourable for magma rising and ponding49,50. Magma storage is inferred at intermediate depth within the HVB (10 ± 3 km53; 6–15 km51; 8–9 km49) and at shallow depth (3 ± 2 km53; 0–3 km50; 3–5 km51; 4–5 and 2 km49). Our results indicate that Cr-rich clinopyroxene crystallised upon arrival of batches of mafic intrusion at a ~10 km storage region. Where sharp oscillatory zoning in Cr is found near the rims of the crystals, it infers fast evacuation, ascent and eruption upon such mafic recharge. Mixed magma then migrated upwards through the shallow feeder system, composed of a complex succession of interconnected storage zones27,28,29,30,31,32. Where eccentric dykes connect the ~10 km storage region with the surface23, the magma rose very quickly. Within the multi-level central conduits, magmas ascended through shallow mushy magma pockets29, which are sustained by magma mixing and degassing32,46 and dominated by complexly zoned plagioclase27 as well as olivine29 and clinopyroxene28,32. The crystal cargo of these centrally erupted lavas is more diverse and represents crystals entrained across nearly the entire crustal column.
Migration of the mafic intrusion to the central conduits has become more pronounced with time, on decadal timescales relevant to the population inhabiting Mt. Etna (Fig. 3). This suggests that strong eruptive activity is likely to continue in the near future, in agreement with geophysical predictions51 and probabilistic modelling69, because the supply of primitive intruding magma has remained sustained. If the euhedral Cr-rich and Cr-poor zones of the mapped clinopyroxenes grew continuously upon recharge, calculations suggest that crystal growth occurred over days to weeks (Figs. 5 and 6). This rapid growth followed prolonged residence times at low temperatures, found to be on the order of decades to millennia in volcanic systems world-wide11,12,56. The new clinopyroxene compositional maps visualise how arrival of fresh mafic intrusion magma effectively triggered eruption, particularly in eccentric events. By contrast, the regular recharges seen as oscillatory zones of much more muted Cr-contrasts (Supplementary Fig. 4) are less effective at tipping the system to eruption62. The consistent ~2 week ‘trigger’ timescale obtained across 40 years of eruptive activity may serve as a clock informing volcano hazard monitoring, as long as the supply of mafic intrusion is sustained. The chief volcanic hazard at Mt. Etna is flank eruption of undegassed magma caused by perturbation of eccentric pathways by the mafic intrusion. Flank lava flows can reach infrastructure and populated areas at relatively low altitudes. Insights from the studied antecrysts suggest that geophysical evidence of activity in eccentric dykes needs to be taken very seriously and that local evacuation efforts may have to work within <2 weeks.
Because clinopyroxene is a common volcanic antecryst, we propose that our line of investigation could be applied to the eruptive products of other active volcanoes. Combined with better constraints on crystal growth rates, such studies have potential to help decode eruption-triggering mechanisms, depths and timescales. Improved constraints on the movement of magma preceding past eruptions could advise future volcano monitoring efforts in relation to the origin of seismic or deformation signals and the time available for hazard evaluation and emergency planning.
We analysed 287 clinopyroxene crystals in Mt. Etna lavas spanning 40 years of eruptive activity (1974–2014; Supplementary Fig. 7; Supplementary Tables 1 and 4; Supplementary Data 1). We collected samples from eight eruptions (1974, 1992, 1999, 2001 lower vents, 2002 north flank, 2002–2003 south flank, 2013, 2014) in two field campaigns in 2015. We studied 30 μm polished thin sections of 15 samples with petrography, LA-ICPMS quantitative trace element mapping37 and field emission scanning electron microscope (FE-SEM) imaging, major element EDS analysis and mapping. We carried out LA-ICPMS maps of up to five crystals per thin section and to derive population statistics, obtained LA-ICPMS transects of between 15 and 44 crystals per thin section depending on rock crystallinity. To account for potential variability of zoning occurrence and thickness, we carried out core to rim transects perpendicular to different crystal faces, up to five per crystal depending on crystal size and shape.
Laser ablation-inductively coupled plasma mass spectrometry data were obtained in 2015 and 2016 at the Geochemistry Laboratories of Trinity College Dublin. We used two separate instruments, both equipped with a 193 nm Excimer UV ArF laser with a Helex 2-volume ablation cell, and a quadruple ICPMS mass spectrometer. The first unit is a Teledyne Photon Machines G2 laser coupled to a Thermo Instruments iCapQs ICPMS. The second is a Teledyne Photon Machines Excite coupled to an Agilent 7900. In both cases, ablation was performed in ultra-pure He to which Ar make-up gas with a trace amount of N2 was added for efficient transport and to aid ionisation. Details of laser parameters, gas flows and mass spectrometer operation are given in Supplementary Table 2. Elemental maps were obtained following the method described in ref. 37. The mapping area was built by overlapping ablation lines to form a rectangular grid. We used a square-shaped laser aperture which was progressively translated by continuous movement of the stage under the fixed ablation site. Spot size selection was determined by the crystal size and set at 24 × 24 μm, 20 × 20 μm, or 12 × 12 μm. Translation speed (measured in μm/s) was set at values of 1.5 times the laser beam size. Repetition rates of 10 Hz were used to ensure overlapping of laser shots across the raster and therefore high spatial resolution, as well as high sensitivity. Individual raster lines were overlapped by 1 μm to avoid un-ablated gaps in the mapped area that may occur when the true projected laser image is slightly smaller than the nominal aperture size. Elemental transects were built with the same method but using one raster line only. To ensure high spatial resolution and sensitivity in transects, we mostly used a 14 μm spot size (circular mask), with a slow translation speed (10 μm/s) and a high repetition rate (20 Hz). The instruments were tuned with scans on NIST612 glass reference material. Elemental maps were built with Iolite70 v2.5 in quantitative mode, using NIST610 glass reference material as calibration standard and calcium concentrations obtained by FE-SEM–EDS (see below) as internal standard. Accuracy and precision were monitored using BHVO-2G glass reference material as secondary standard (http://georem.mpch-mainz.gwdg.de/); accuracy was typically better than 10% for Cr, Ga, Ni, Nb, Sc and Zr, and better than 5% for Ba, La, Nd and Sr; precision was typically better than 5% for all analysed elements. Limits of detection71 were at the sub-ppm level for most analysed elements and typically below 5 ppm for Sc, Cr and Ni.
Analysis of crystal populations from LA-ICPMS data
Size and thickness measurements were carried out on spatially registered maps or transects built with the CellSpace72 module for Iolite. We measured crystal sizes (average of long and short axes), noted if they occurred in single crystals or glomerocryst associations, and noted the presence, location and thickness of Cr-rich zones and their distance to the rim of the crystal (Supplementary Table 4; Supplementary Data 1). The crystallographic orientation of the crystals exposed in the thin section had no noticeable effect on measured thicknesses, nevertheless average thickness values were obtained for each crystal based on several crystal faces mapped or transected. For intrusion statistics, we considered Cr-rich zones at the rims of antecrysts or at the core of phenocrysts.
Crystal zone thicknesses were used to calculate timescales of crystallisation (Supplementary Table 4; Supplementary Data 1). Growth of Cr-rich rims was used to estimate timescales from recharge to mobilisation, and growth of Cr-poor outermost rims together with estimates on the depth of clinopyroxene mushes were used to calculate timescales and rates of magma ascent and emplacement. Chromium-rich and Cr-poor zones have polyhedral morphologies typical of relatively low degrees of undercooling41,57 and show euhedral habits with no evidence of resorption after crystallisation. We used a clinopyroxene growth rate of 10–8 cm/s26,54,55 for Cr-rich zones and considered crystallisation up to one order of magnitude faster57 (10–8–10−7 cm/s) for Cr-poor zones related to final magma ascent and degassing.
Extraction of compositions from LA-ICPMS maps
Average trace element compositions of Cr-rich and Cr-poor clinopyroxene zones were extracted from LA-ICPMS maps and melts in equilibrium with these were calculated with mineral/melt partition coefficients obtained for recent Mt. Etna hawaiites39. To extract clinopyroxene compositions from LA-ICPMS maps (Supplementary Table 3), we used Iolite70 v2.5 to define integrations based on beam intensity. First, we filtered compositions above a visual calcium threshold (in counts per second) to isolate clinopyroxene compositions from other minerals in the mapped area (e.g. see map of Ca counts per second in Supplementary Fig. 4) and primary and secondary standards measured in the run. Then, we filtered compositions further to those with chromium concentrations between 500 and 2000 ppm for Cr-rich clinopyroxene and between 0 and 400 ppm for Cr-poor clinopyroxene. To avoid including transient signal peaks, we set up a minimum of 2 s of signal complying with the above criteria to include the data in the integrations.
Major element data were obtained in 2016 and 2017 at the iCRAG labs at Trinity College Dublin. We analysed crystals that record mafic intrusion from the 1974 and 2002–2003 eccentric eruptions and 2014 central conduit eruption (Supplementary Data 2). We used two FE-SEM Tescan instruments: a MIRA XMU equipped with an Oxford X-Max 80 mm2 Energy Dispersive Spectrometer (EDS) detector running Oxford INCA X-ray microanalysis software, and a TIGER MIRA3 equipped with two Oxford X-Max 150 mm2 EDS detectors running Oxford AZtec X-ray microanalysis software. Analyses were performed on carbon-coated thin sections under high vacuum conditions using an accelerating voltage of 20 kV. The Mira instrument was operated at ~400 pA beam current and 18.5 mm working distance; X-rays were acquired for 30 s per spot, reaching >350,000 counts. The Tiger instrument was operated at ~300 pA beam current and 15 mm working distance. X-ray collection was set to stop at 106 counts per spot, which typically took 22 s. Both instruments were calibrated for quantitative analysis with Smithsonian microbeam standards73 microcline (Si), augite (Al, Ti, Mg and Ca), pyrope (Fe and Mn), anorthoclase (Na and K), and synthetic Cr2O3 and NiO oxides (Cr and Ni, respectively). Beam current drift was controlled by frequent analysis of cobalt and matrix correction was made using an Oxford-PP (ZAF-type; Z: atomic number, A: absorption, F: fluorescence) procedure. Precision and accuracy were monitored by analysing Smithsonian microbeam standards73 augite and diopside at the beginning of each analytical session and with sample exchanges. Precision was better than 1% for all analysed elements; accuracy was better than 1% for elements with concentrations above 1 wt% and better than 5% for elements with concentrations below 1 wt%. In addition, the Tiger instrument was used to acquire semi-quantitative maps. The FE-SEM–EDS maps in Fig. 2 have a size of 774 × 580 μm and were built using a pixel size of 0.3 μm, a dwell time per pixel of 5 s and a frame count of 2, with a total experiment time of 14 h.
Algorithms provided by ref. 48 were applied to major element compositions of crystals that record mafic intrusion from the 1974 and 2002–2003 eccentric eruptions and 2014 central conduit eruption (Supplementary Data 2). We used data from antecryst cores and Cr-rich rims, whereas Cr-poor outermost rims that crystallised upon final magma ascent and degassing have more scattered compositions (Supplementary Fig. 2) and were not included in calculations74. We also avoided sector zoned crystals, if present, to eliminate potential kinetic effects on barometry estimates75. We chose a representative bulk trachybasalt scoria composition from the eccentric 1974 eruption23, characterised by low crystal contents, as closest representative of the mafic intrusion melt. Crystallisation temperatures were calculated using pressure-independent thermometry76, with a relatively low uncertainty of ±25 °C. With regard to pressure estimates, the application of melt-dependent barometers is hindered here by the fact that most clinopyroxene compositions are antecrystic and out of equilibrium with whole rock or groundmass compositions. Melt-independent barometers, by contrast, have recently been used to explore storage depths of magmas feeding ancient (220–100 ka)77 and recent (2001–2012)32 Etnean eruptions. To account for the hydrous nature of Etna magmas, we used Equation 32b of ref. 44, which takes into account the water content of the liquid in equilibrium with clinopyroxene (we assumed a conservative 2 wt% average H2O content17,26) and has an uncertainty of ±200 MPa. Solved iteratively using the temperature returned by the thermometer of ref. 76, this barometer has been assessed to provide most accurate results in Etna and other volatile-rich alkaline systems74,75,77.
The authors declare that all data supporting the findings of this study are included in this published article and its Supplementary information files. All relevant data are also available on request from the corresponding author (T.U.).
Sparks, R. S. J., Sigurdsson, H. & Wilson, L. Magma mixing: a mechanism for triggering acid explosive eruptions. Nature 267, 315–318 (1977).
Izbekov, P. E., Eichelberger, J. C., Patino, L. C., Vogel, T. A. & Ivanov, B. V. Calcic cores of plagioclase phenocrysts in andesite from Karymsky volcano: evidence for rapid introduction by basaltic replenishment. Geology 30, 799–802 (2002).
Izbekov, P. E., Eichelberger, J. C. & Ivanov, B. V. The 1996 eruption of Karymsky volcano, Kamchatka: historical record of Basaltic replenishment of an Andesite reservoir. J. Petrol. 45, 2325–2345 (2004).
Reubi, O. & Blundy, J. A dearth of intermediate melts at subduction zone volcanoes and the petrogenesis of arc andesites. Nature 461, 1269–1273 (2007).
Bergantz, G. W., Schleicher, J. M. & Burgisser, A. Open-system dynamics and mixing in magma mushes. Nat. Geosci. 8, 793–796 (2015).
Kent, A. J. R., Darr, C., Koleszar, A. M., Salisbury, M. J. & Cooper, K. M. Preferential eruption of andesitic magmas through recharge filtering. Nat. Geosci. 3, 631–636 (2010).
Ubide, T. et al. The relevance of crystal transfer to magma mixing: a case study in composite dykes from the Central Pyrenees. J. Petrol. 55, 1535–1559 (2014).
Shinohara, H. Excess degassing from volcanoes and its role on eruptive and intrusive activity. Rev. Geophys. https://doi.org/10.1029/2007rg000244 (2008).
Degruyter, W., Huber, C., Bachmann, O., Cooper, K. M. & Kent, A. J. R. Magma reservoir response to transient recharge events: the case of Santorini volcano (Greece). Geology https://doi.org/10.1130/G37333.1 (2015).
Druitt, T. H., Costa, F., Deloule, E., Dungan, M. & Scaillet, B. Decadal to monthly timescales of magma transfer and reservoir growth at a caldera volcano. Nature 482, 77–80 (2012).
Cooper, K. M. & Kent, A. J. R. Rapid remobilization of magmatic crystals kept in cold storage. Nature 506, 480–483 (2014).
Till, C. B., Vazquez, J. A. & Boyce, J. W. Months between rejuvenation and volcanic eruption at Yellowstone caldera, Wyoming. Geology 43, 695–698 (2015).
Condomines, M., Tanguy, J. C. & Michaud, V. Magma dynamics at Mt. Etna: constraints from U-Th-Ra-Pb radioactive disequilibria and Sr isotopes in historical lavas. Earth Planet. Sci. Lett. 132, 25–41 (1995).
Métrich, N., Allard, P., Spilliaert, N., Andronico, D. & Burton, M. 2001 flank eruption of the alkali- and volatile-rich primitive basalt responsible for Mount Etna’s evolution in the last three decades. Earth Planet. Sci. Lett. 228, 1–17 (2004).
Spilliaert, N., Allard, P., Métrich, N. & Sobolev, A. V. Melt inclusion record of the conditions of ascent, degassing, and extrusion of volatile-rich alkali basalt during the powerful 2002 flank eruption of Mount Etna (Italy). J. Geophys. Res. 111, B04203 (2006).
Kamenetsky, V. S. et al. Arrival of extremely volatile-rich high-Mg magmas changes explosivity of Mount Etna. Geology 35, 255–258 (2007).
Armienti, P., Tonarini, S., Innocenti, F. & D’Orazio, M. Mount Etna pyroxene as tracer of petrogenetic processes and dynamics of the feeding system. Geol. Soc. Am. Spec. Pap. 418, 265–276 (2007).
Viccaro, M. & Cristofolini, R. Nature of mantle heterogeneity and its role in the short-term geochemical and volcanological evolution of Mt. Etna (Italy). Lithos 105, 272–288 (2008).
Corsaro, R. A. & Métrich, N. Chemical heterogeneity of Mt. Etna magmas in the last 15 ka. Inferences on their mantle sources. Lithos 252–253, 123–134 (2016).
Tanguy, J. C. & Clocchiatti, R. The Etnean lavas, 1977-1983: petrology and mineralogy. Bull. Volcanol. 47–4, 879–994 (1984).
Condomines, M. et al. Short-lived radioactive disequilibria and magma dynamics in Etna volcano. Nature 325, 607–609 (1987).
Corsaro, R. A., Miraglia, L. & Pompilio, M. Petrologic evidence of a complex plumbing system feeding the July–August 2001 eruption of Mt. Etna, Sicily, Italy. Bull. Volcanol. 69, 401–421 (2007).
Corsaro, R. A. et al. The 1974 flank eruption of Mount Etna: an archetype for deep dike-fed eruptions at basaltic volcanoes and a milestone in Etna’s recent history. J. Geophys. Res. 114, B07204 (2009).
Aiuppa, A. et al. Forecasting Etna eruptions by real-time observation of volcanic gas composition. Geology 35, 1115–1118 (2007).
Behncke, B. & Neri, M. The July–August 2001 eruption of Mt. Etna (Sicily). Bull. Volcanol. 65, 461–476 (2003).
Armienti, P., Perinelli, C. & Putirka, K. D. A. New model to estimate deep-level magma ascent rates, with applications to Mt. Etna (Sicily, Italy). J. Petrol. 54, 795–813 (2013).
Giacomoni, P. P., Ferlito, C., Coltorti, M., Bonadiman, C. & Lanzafame, G. Plagioclase as archive of magma ascent dynamics on “open conduit” volcanoes: the 2001–2006 eruptive period at Mt. Etna. Earth-Sci. Rev. 138, 371–393 (2014).
Giacomoni, P. P., Coltorti, M., Bryce, J. G., Fahnestock, M. F. & Guitreau, M. Mt. Etna plumbing system revealed by combined textural, compositional, and thermobarometric studies in clinopyroxenes. Contrib. Mineral. Petrol. 171, 34 (2016).
Kahl, M., Chakraborty, S., Pompolio, M. & Costa, F. Constraints on the nature and evolution of the magma plumbing system of Mt. Etna volcano (1991–2008) from a combined thermodynamic and kinetic modelling of the compositional record of minerals. J. Petrol. 56, 2025–2068 (2015).
Kahl, M., Viccaro, M., Ubide, T., Morgan, D. J. & Dingwell, D. B. A branched magma feeder system during the 1669 eruption of Mt Etna: evidence from a time-integrated study of zoned olivine phenocryst populations. J. Petrol. 58, 443–472 (2017).
Giuffrida, M. & Viccaro, M. Three years (2011–2013) of eruptive activity at Mt. Etna: working modes and timescales of the modern volcano plumbing system from microanalytical studies of crystals.Earth-Sci. Rev. 171, 289–322 (2017).
Mollo, S. et al. Reconstruction of magmatic variables governing recent Etnean eruptions: constraints from mineral chemistry and P–T–fO2–H2O modelling. Lithos 212–215, 311–320 (2015).
Costa, F. & Morgan, D. in Timescales of Magmatic Processes: From Core to Atmosphere (eds Bonaccorso, A., Turner, S. P. & Van Orman, J. A.) (Blackwell Publishing Ltd., Chichester, West Sussex, UK, 2011).
Müller, T., Dohmen, R., Becker, H. W., Ter Heege, J. H. & Chakraborty, S. Fe–Mg interdiffusion rates in clinopyroxene: experimental data and implications for Fe–Mg exchange geothermometers. Contrib. Mineral. Petrol. 166, 1563–16576 (2013).
Bouvet de Maisonneuve, C. et al. How do olivines record magmatic events? Insights from major and trace element zoning. Contrib. Mineral. Petrol. 176, 56 (2016).
Ginibre, C., Wörner, G. & Kronz, A. Crystal zoning as an archive for magma evolution. Elements 3, 261–266 (2007).
Ubide, T., McKenna, C. A., Chew, D. M. & Kamber, B. S. K. High-resolution LA-ICP-MS trace element mapping of igneous minerals: in search of magma histories. Chem. Geol. 409, 157–168 (2015).
Streck, M. J. Mineral textures and zoning as evidence for open system processes. Rev. Mineral. Geochem. 69, 595–622 (2008).
D’Orazio, M., Armienti, P. & Cerretini, S. Phenocryst/matrix trace-element partition coefficients for hawaiite-trachyte lavas from the Ellittico volcanic sequence (Mt. Etna, Sicily, Italy). Mineral. Petrol. 64, 65–68 (1998).
Mollo, S., Giacomoni, P. P., Andronico, D. & Scarlato, P. Clinopyroxene and titanomagnetite cation redistributions at Mt. Etna volcano (Sicily, Italy): footprints of the final solidification history of lava fountains and lava flows. Chem. Geol. 406, 45–54 (2015).
Mollo, S., Del Gaudio, P., Ventura, G., Iezzi, G. & Scarlato, P. Dependence of clinopyroxene composition on cooling rate in basaltic magmas: Implications for thermobarometry. Lithos 118, 302–312 (2010).
Mollo, S., Blundy, J. D., Iezzi, G., Scarlato, P. & Langone, A. The partitioning of trace elements between clinopyroxene and trachybasaltic melt during rapid cooling and crystal growth. Contrib. Mineral. Petrol. 166, 1633–1654 (2013).
Ubide, T., Galé, C., Larrea, P., Arranz, E. & Lago, M. Antecrysts and their effect on rock compositions: the cretaceous lamprophyre suite in the catalonian coastal ranges (NE Spain). Lithos 206–207, 214–233 (2014).
Putirka, K. D. Thermometers and barometers for volcanic systems. Rev. Mineral. Geochem. 69, 61–120 (2008).
Bottari, A., Lo Giudice, E., Patanè, G., Romano, R. & Sturiale, C. L’eruzione etnea del Gennaio-Marzo 1974. Riv. Min. Sci. 154–156, 175–199 (1975).
Ferlito, C., Viccaro, M., Nicotra, E. & Cristofolini, R. Regimes of magma recharge and their control on the eruptive behaviour during the period 2001–2005 at Mt. Etna volcano. Bull. Volcanol. 74, 533–543 (2012).
Barkov, A. Y. & Martin, R. F. Anomalous Cr-rich zones in sector-zoned clinopyroxene macrocrysts in gabbro, Mont Royal, Montreal, Quebec, Canada. Can. Mineral. 53, 895–910 (2015).
Neave, D. A. & Putirka, K. D. A new clinopyroxene-liquid barometer, and implications for magma storage pressures under Icelandic rift zones. Am. Mineral. 102, 777–794 (2017).
Patanè, D. et al. Insights into magma and fluid transfer at Mount Etna by a multiparametric approach: a model of the events leading to the 2011 eruptive cycle. J. Geophys. Res.: Solid Earth 118, 3519–3539 (2013).
Aloisi, M., Cocina, O., Neri, G., Orecchio, B. & Privitera, E. Seismic tomography of the crust underneath the Etna volcano, Sicily. Phys. Earth Planet. Inter. 134, 139–155 (2002).
Patanè, D., De Gori, P., Chiarabba, C. & Bonaccorso, A. Magma ascent and the pressurization of Mount Etna’s volcanic system. Science 299, 2061–2063 (2003).
Chiarabba, C., De Gori, P. & Patanè, D. in Mt. Etna: Volcano Laboratory,Geophysical Monograph Series (eds Bonaccorso, A. et al.) Vol. 143, 191–204 (AGU, Washington D.C., 2004).
Murru, M. & Montuori, C. The locations of magma chambers at Mt. Etna, Italy, mapped by b-values. Geophys. Res. Lett. 26, 2553–2556 (1999).
Armienti, P. et al. The long-standing 1991-1993 Mount Etna eruption: petrography and geochemistry of lavas. Acta Vulcanol. 4, 15–28 (1994).
Orlando, A., D’Orazio, M., Armienti, P. & Borrini, D. Experimental determination of plagioclase and clinopyroxene crystal growth rates in an anhydrous trachybasalt from Mt. Etna (Italy). Eur. J. Mineral. 20, 653–664 (2008).
Blundy, J. & Cashman, K. Rapid decompression-driven crystallization recorded by melt inclusions from Mount St. Helens volcano. Geology 33, 793–796 (2005).
Kouchi, A., Sugawara, Y., Kashima, K. & Sunagawa, I. Laboratory growth of sector zoned clinopyroxenes in the system CaMgSi2O6–CaTiAl2O6. Contrib. Mineral. Petrol. 83, 177–184 (1983).
Gambino, S., Mostaccio, A., Patanè, D., Scarfi, L. & Ursino, A. High-precision locations of the microseismicity preceding the 2002–2003 Mt. Etna eruption. Geophys. Res. Lett. 31, L18604 (2004).
Perinelli, C. et al. An improved clinopyroxene-based hygrometer for Etnean magmas and implications for eruption triggering mechanisms. Am. Mineral. 101, 2774–2777 (2016).
Aloisi, M., Bonaccorso, A. & Gambino, S. Imaging composite dike propagation (Etna, 2002 case). J. Geophys. Res.: Solid Earth 111, B8 (2006).
Ruprecht, P. & Plank, T. Feeding andesitic eruptions with a high-speed connection from the mantle. Nature 500, 68–72 (2013).
Putirka, K. D. Down the crater: where magmas are stored and why they erupt. Elements 13, 11–16 (2017).
Gualda, G. A. R., Ghiorso, M. S., Lemons, R. V. & Carley, T. L. Rhyolite-MELTS: a modified calibration of MELTS optimized for silica-rich, fluid-bearing magmatic systems. J. Petrol. 53, 875–890 (2012).
Van Orman, J. A., Grove, T. L. & Shimizu, N. Rare earth element diffusion in diopside: influence of temperature, pressure, and ionic radius, and an elastic model for diffusion in silicates. Contrib. Mineral. Petrol. 141, 687–703 (2001).
Morgan, D. J. et al. Time scales of crystal residence and magma chamber volume from modelling of diffusion profiles in phenocrysts: Vesuvius 1944. Earth Planet. Sci. Lett. 222, 933–946 (2004).
Nakagawa, M., Wada, K., Thordarson, T., Wood, C. P. & Gamble, J. A. Petrologic investigations of the 1995 and 1996 eruptions of Ruapehu volcano, New Zealand: formation of discrete and small magma pockets and their intermittent discharge. Bull. Volcanol. 61, 15–31 (1999).
Nakagawa, M., Wada, K. & Wood, C. P. Mixed magmas, mush chambers and eruption triggers: evidence from zoned clinopyroxene phenocrysts in andesitic scoria from the 1995 eruptions of Ruapehu volcano, New Zealand. J. Petrol. 43, 2279–2303 (2002).
Welsch, B. et al. Clinopyroxene in postshield Haleakala ankaramite: 2. Texture, compositional zoning and supersaturation in the magma. Contrib. Mineral. Petrol. 171, 6 (2016).
Capello, A., Bilotta, G., Neri, M. & Del Negro, C. Probabilistic modeling of future volcanic eruptions at Mount Etna. J. Geophys. Res.: Solid Earth 118, 1925–1935 (2013).
Paton, C., Hellstrom, J., Paul, B., Woodhead, J. & Hergt, J. Iolite: freeware for the visualisation and processing of mass spectrometric data. J. Anal. At. Spectrom. 26, 2508–2518 (2011).
Longerich, H. P., Jackson, S. E. & Günther, D. Laser ablation inductively coupled plasma mass spectrometric transient signal data acquisition and analyte concentration calculation. J. Anal. At. Spectrom. 11, 899–904 (1996).
Paul, B. et al. CellSpace: a module for creating spatially registered laser ablation images within the Iolite freeware environment. J. Anal. At. Spectrom. 27, 700–706 (2012).
Jarosewich, E., Nelen, J. A. & Norberg, J. A. Reference samples for electron microprobe analysis. Geostand. Newsl. 4, 43–47 (1980).
Ubide, T., Galé, C., Arranz, E., Lago, M. & Larrea, P. Clinopyroxene and amphibole crystal populations in a lamprophyre sill from the Catalonian Coastal Ranges (NE Spain): a record of magma history and a window to mineral-melt partitioning. Lithos 184–187, 225–242 (2014).
Hammer, J., Jacob, S., Welsch, B., Hellebrand, E. & Sinton, J. Clinopyroxene in postshield Haleakala ankaramite: 1. Efficacy of thermobarometry. Contrib. Mineral. Petrol. 171, 7 (2016).
Putirka, K. D., Johnson, M., Kinzler, R. J., Longhi, J. & Walker, D. Thermobarometry of mafic igneous rocks based on clinopyroxene-liquid equilibria, 0–30 kbar. Contrib. Mineral. Petrol. 123, 92–108 (1996).
Miller, S. A., Myers, M., Fahnestock, M. F., Bryce, J. G. & Blichert-Toft, J. Magma dynamics of ancient Mt. Etna inferred from clinopyroxene isotopic and trace element systematics. Geochem. Perspect. Lett. 4, 47–52 (2017).
Corsaro, R. A. & Pompilio, M. Buoyancy-controlled eruption of magmas at Mount Etna. Terra Nova 16, 16–22 (2003).
Hirn, A., Nicolich, R., Gallart, J. & Laigle, M., ETNASEIS Scientific Group. Roots of Etna volcano in faults of great earthquakes. Earth Planet. Sci. Lett. 148, 171–191 (1997).
This work was funded by Science Foundation Ireland (SFI/12/ERC/E2499 to B.S.K.) and was supplemented with additional funding by The University of Queensland (UQECR1717581 to T.U.) and the Australian Geoscience Council and the Australian Academy of Science (34th IGC Travel Grant to T.U.). We thank Salvatore Ragonesi and Robbie Clarke for help during sampling, David Chew, John Caulfield and Cora McKenna for analytical discussions on LA-ICPMS, Paul Guyett and Thomas Riegler for assistance with FE-SEM–EDS analysis, and Maren Kahl, Silvio Mollo, John Maclennan, Georg Zellmer, Ruadhán Magee and the Magmatic Petrology and Volcanology group at ETH Zurich for discussions on mineral zoning. We acknowledge very insightful suggestions and comments from two anonymous reviewers. We thank the School of Earth and Environmental Sciences at The University of Queensland for covering publication costs.
The authors declare no competing financial interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Ubide, T., Kamber, B.S. Volcanic crystals as time capsules of eruption history. Nat Commun 9, 326 (2018). https://doi.org/10.1038/s41467-017-02274-w
Chemical Geology (2021)
Nature Communications (2021)
Paleoarchean variole-bearing metabasalts from the East Pilbara Terrane formed by hydrous fluid phase exsolution and implications for Archean greenstone belt magmatic processes
Precambrian Research (2021)
Green core clinopyroxenes from basanites of Petpenoun volcanoes, Noun Plain, Cameroon volcanic line: chemistry and genesis
Bulletin of Volcanology (2021)
Gabbroic xenoliths and glomerocrysts in the post-collisional trachyandestic rocks from Tengchong, SE Tibet: Implications for the magma chamber processes
Acta Petrologica Sinica (2020)