Abstract
The interplay between symmetry and topology leads to a rich variety of electronic topological phases, protecting states such as the topological insulators and Dirac semimetals. Previous results, like the FuKane parity criterion for inversionsymmetric topological insulators, demonstrate that symmetry labels can sometimes unambiguously indicate underlying band topology. Here we develop a systematic approach to expose all such symmetrybased indicators of band topology in all the 230 space groups. This is achieved by first developing an efficient way to represent band structures in terms of elementary basis states, and then isolating the topological ones by removing the subset of atomic insulators, defined by the existence of localized symmetric Wannier functions. Aside from encompassing all earlier results on such indicators, including in particular the notion of fillingenforced quantum band insulators, our theory identifies symmetry settings with previously hidden forms of band topology, and can be applied to the search for topological materials.
Introduction
The discovery of topological insulators (TIs) has reinvigorated the wellestablished theory of electronic band structures (BSs)^{1, 2}. Exploration along this dimension has led to an evergrowing arsenal of topological materials, which include, for instance, topological (crystalline) insulators^{3,4,5}, quantum anomalous Hall insulators^{6} and Weyl and Dirac semimetals^{7}. Such materials possess unprecedented physical properties, like quantized response and gapless surface states, that are robust against all symmetrypreserving perturbations as long as a band picture remains valid^{1, 2, 7}.
Soon after these developments, it was realized that symmetries of energy bands, a thoroughly studied aspect of band theory, is also profoundly intertwined with topology. This is exemplified by the celebrated FuKane criterion for inversionsymmetric materials, which demarcates TIs from trivial insulators using only their parity eigenvalues^{8}. This criterion, when applicable, greatly simplifies the topological analysis of real materials, and underpins the theoretical prediction and subsequent experimental verification of many TIs^{8,9,10,11,12}.
It is of fundamental interest to obtain results akin to the FuKane criterion in other symmetry settings. Early generalizations in systems without timereversal (TR) symmetry in twodimensional (2D) constrained the Chern number (C). The eigenvalues of an nfold rotation were found to determine C modulo n ^{13,14,15}. This is characteristic of a symmetrybased indicator of topology—when the indicator is nonvanishing, band topology is guaranteed, but certain topological phases (i.e., C a multiple of n in this context) may be invisible to the indicator. In threedimensional (3D) systems, it was also recognized that spatial inversion alone can protect nontrivial phases. A feature here is that these phases do not host protected surface states, since inversion symmetry is broken at the surface, but they do represent distinct phases of matter. For example, they possess nontrivial Berry phase structure in the Brillouin zone, which leads to robust entanglement signatures^{13, 14, 16, 17} and, in some cases, quantized responses^{13, 14, 18}. Interestingly, in the absence of TR invariance the inversion eigenvalues can also protect Weyl semimetals^{13, 14}, which informed early work on materials candidates^{19}. Hence, these symmetrybased indicators are relevant both to the search for nontrivial insulating phases, and also to the study of topological semimetals. It is also important to note that the goal here is to identify signatures of band topology in the symmetry transformations of the state, which is distinct from the full classification of topological phases.
An important open problem is to extend these powerful symmetry indicators for band topology to all space groups (SGs). Earlier studies have emphasized the topological perspective, which typically rely on constructions that are specifically tailored to particular band topology of interest^{8, 15, 20, 21}. While some general mathematical frameworks have been developed^{22,23,24}, obtaining a full list of concrete results from such an approach faces an inherent challenge stemming from the sheer multitude of physically relevant symmetry settings—there are 230 SGs in 3D, and each of them is further enriched by the presence or absence of both spin–orbit coupling and TR symmetry.
A complementary, symmetryfocused perspective leverages the existing exhaustive results on band symmetries^{25, 26} to simplify the analysis. Previous work along these lines has covered restricted cases^{13, 14, 27, 28}. For instance, in ref. ^{28}, which focuses on systems in the wallpaper groups without any additional symmetry, such an approach was adopted to help develop a more physical understanding of the mathematical treatment of ref. ^{22}. However, the notion of nontriviality is a relative concept in these approaches. While such formulation is wellsuited for the study of phase transitions between different systems in the same symmetry setting, it does not always indicate the presence of underlying band topology. As an extreme example, such classifications generally regard atomic insulators (AIs) with different electron fillings as distinct phases, although all the underlying BSs are topologically trivial.
Here, we adopt a symmetrybased approach that focuses on probing the underlying band topology. At the crux of our analysis is the observation that topological BSs arise whenever there is a mismatch between momentumspace and realspace solutions to symmetry constraints^{29, 30}. To quantitatively expose such mismatches, we first develop a mathematical framework to efficiently analyze all possible BSs consistent with any symmetry setting, and then discuss how to identify the subset of BSs arising from AIs, which are formed by localizing electrons to definite orbitals in real space. The mentioned mismatch then follows naturally as the quotient between the allowed BSs and those arising from realspace specification. We compute this quotient for all 230 SGs with or without spin–orbit coupling and/or TR symmetry. Using these results, we highlight symmetry settings suitable for finding topological materials, including both insulators and semimetals. In particular, we will point out that, in the presence of inversion symmetry, stacking two strong 3D TIs will not simply result in a trivial phase, despite all the \({{\Bbb Z}_2}\) indices have been trivialized. Instead, it is shown to produce a quantum band insulator (QBI)^{30}, which can be diagnosed through its robust gapless entanglement spectrum.
Results
Overview of strategy and results
Our major goal is to systematically quantify the mismatch between momentumspace and realspace solutions to symmetry constraints in freeelectron problems^{30}. While AIs, which by definition possess localized symmetric Wannier orbitals, can be understood from a realspace picture with electrons occupying definite positions as if they were classical particles, topological BSs (that are intrinsic to dimensions greater than one) do not admit such a description. Whenever there is an obstruction to such a realspace reinterpretation for a band insulator, the insulating behavior can only be understood through the quantum interference of electrons, and we refer to such systems as QBIs. While all topological phases such as Chern insulators, weak and strong \({{\Bbb Z}_2}\) TIs and topological crystalline insulators with protected surface states in d > 1 are QBIs, more generally, QBIs may not have nontrivial surface states when the protecting symmetries are not compatible with any surface termination. Nonetheless, they represent distinct phases of matter and showcase nontrivial Berry phase in the Brillouin zone^{31}, robust entanglement signatures^{13, 14, 16, 30}, and sometimes quantized responses^{13, 14, 18}.
Building on this insight, we develop an efficient strategy for identifying topological materials indicated by symmetries. We will first outline a simple framework to organize the set of all possible BSs using only their symmetry labels. By extending the ideas in refs ^{13, 28} and allowing for both addition (stacking) as well as formal subtractions of bands, we show that BSs can be conveniently represented in terms of a special type of Abelian group, which is simply called a lattice in mathematical nomenclature. Next, to isolate topological BSs we quotient out those that can arise from a Wannier description. Since such band topology is uncovered from the symmetry representations of the bands, we will refer to it as being representedenforced. In this work, we present the results of this computation for all of the 230 SGs, 80 layer groups, and 75 rod groups, covering all cases with or without TR symmetry and spin–orbit coupling. Our scheme automatically encompasses all previous results concerning symmetry indicators of band topology, including in particular the FuKane criterion, the relation between Chern numbers and rotation eigenvalues, and the inversionprotected nontrivial phases.
We will utilize the results and identify representationenforced QBIs (reQBIs). We will also discuss a more constrained approach where one first specifies the microscopic lattice degrees of freedom. This is relevant to materials where a hierarchy of energy scales isolates a group of atomic orbitals. We find examples where these constraints lead to semimetallic behavior, despite band insulators at the same filling are symmetryallowed. We will refer to these as latticeenforced semimetals (leSMs) and give a concrete tightbinding example of them. Generalizations of these approaches should aid in the discovery of experimentally relevant topological semimetals and insulators.
Finally, we make two remarks. First, we ignore electron–electron interactions. Second, while our approach is applicable in any dimension, in the special case of onedimensional (1D) problems even topological phases are smoothly connected to AIs^{32}, and therefore are regarded as trivial within our framework. These states, and their descendants in higher dimensions, are collectively known as frozenpolarization insulators^{13}, and will be absent from our discussion on topological phases.
BSs form an Abelian group
Here, we argue that the possible set of BSs symmetric under an SG \({\cal G}\) can be naturally identified as the group \({{\Bbb Z}^{{d_{{\rm{BS}}}}}} \equiv {\Bbb Z} \times {\Bbb Z} \times \ldots \times {\Bbb Z}\), where d _{BS} is a positive integer that depends on both \({\cal G}\) and the spin of the particles (Fig. 1). We will first set aside TR symmetry, and later discuss how it can be easily incorporated into the same framework. The discussion in this section follows immediately from wellestablished results concerning band symmetries^{25}, and the same set of results was recently utilized in ref. ^{28} to discuss an alternative way to understand the more formal classification in ref. ^{22}. Although there is some overlap between the discussion here and that in ref. ^{28}, we will focus on a different aspect of the narration: instead of being solely concerned with the values of d _{BS}, we will be more concerned with utilizing this framework to extract other physical information about the systems.
We begin by reviewing some basic notions using a simple example. Consider free electrons in a 1D, inversionsymmetric crystal. The energy bands E _{m}(k) are naturally labeled by the band index m and the crystal momentum k ∈ (−π, π). Since inversion P flips k ↔ −k, the Bloch Hamiltonian H(k) is symmetric under PH(k)P ^{−1} = H(−k), which implies E _{m}(k) = E _{m}(−k), and the wavefunctions are similarly related. The two momenta k _{0} = 0 and π are special as they satisfy P(k _{0}) = k _{0} (up to a reciprocal lattice vector). As such, the symmetry constraint imposed by P becomes a local constraint at k _{0}, which implies the wavefunctions ψ _{m}(k _{0}) (generically) furnish irreducible representations (irreps) of P: \(\psi _{\rm{m}}^\dag \left( {{k_0}} \right)P{\psi _{\rm{m}}}\left( {{k_0}} \right) = {\zeta _{\rm{m}}}\left( {{k_0}} \right)\), with ζ _{m}(k _{0}) = ±1.
The parities ζ _{m}(k _{0}) = ±1 can be regarded as local (in momentum space) symmetry labels for the energy band E _{m}(k), and such labels can be readily lifted to a global one assigned to any set of bands separated from others by a band gap. We will refer to such sets of bands as BSs, although, as we will explain, caution has to be taken when this notion is used in higher dimensions. Insofar as symmetries are concerned, we can label the BS by its filling, ν, together with the four nonnegative integers, \(n_{{k_0}}^ \pm \), corresponding to the multiplicity of the irrep ± at k _{0} (Fig. 1a). Generally, such labels are not independent, since the assumption of a band gap, together with the continuity of the energy bands, casts global symmetry constraints on the symmetry labels. These constraints are known as compatibility relations. For our 1D problem at hand, there are only two of them, which arise from the filling condition: \(\nu = n_0^ + + n_0^  = n_\pi ^ + + n_\pi ^  \). Consequently, the BS is fully specified by three nonnegative integers, which we can choose to be \(n_0^ + \), \(n_\pi ^ + \), and ν.
This discussion to this point is similar to that of ref. ^{28}, but we now depart from the combinatorics point of view of that work. Instead, similar to ref. ^{13} we develop a mathematical framework to efficiently characterize energy bands in terms of their symmetry transformation properties, and then show that it provides a powerful tool for analyzing general BSs. To begin, we first note that any BS in this 1D inversionsymmetry problem can be represented by a fivecomponent “vector” \({\bf{n}} \equiv \left( {n_0^ + ,n_0^  ,n_\pi ^ + ,n_\pi ^  ,\nu } \right) \in {\Bbb Z}_{ \ge 0}^5\), where \({{\Bbb Z}_{ \ge 0}}\) denotes the set of nonnegative integers. In addition, n is subjected to the two compatibility relations. We can arrange these relations into a system of linear equations and denote them by a 2 × 5 matrix \({\cal C}\). The admissible BSs then satisfy \({\cal C}{\bf{n}} = {\rm{0}}\), and hence \({\rm{ker}}\,{\cal C}\), the solution space of \({\cal C}\), naturally enters the discussion. For the current problem, \({\rm{ker}}\,{\cal C}\) is 3D, which echoes with the claim that the BS is specified by three nonnegative integers.
At this point, it is natural to make a mathematical abstraction and lift the physical condition of nonnegativity. We define
where for the 1D problem at hand we have D = 5. The main advantage of this abstraction is that, unlike \({\Bbb Z}_{ \ge 0}^D\), \({{\Bbb Z}^D}\) is an Abelian group, which greatly simplifies our forthcoming analysis. In particular, {BS} so defined can be identified with \({{\Bbb Z}^{{d_{{\rm{BS}}}}}}\), where d _{BS} = 3 is the dimension of the solution space \({\rm{ker}}\,{\cal C}\). Physically, the addition in \({{\Bbb Z}^{{d_{{\rm{BS}}}}}}\) corresponds to the stacking of energy bands.
Next, we generalize the discussion to any SG \({\cal G}\) in three dimensions. We call a momentum k a highsymmetry momentum if there is any \(g \in {\cal G}\) other than the lattice translations such that g(k) = k (up to a reciprocal lattice vector). We define a BS as a set of energy bands isolated from all others by band gaps above and below at all highsymmetry momenta. Note that, in 3D, the phrase “all highsymmetry momenta” includes all highsymmetry points, lines, and planes. The discussion for the 1D example carries through, except that one has to consider a much larger zoo of irreps and compatibility relations^{25} (see Methods and Supplementary Notes 1 and 2 for a detailed discussion).
While Eq. 5 follows readily from definitions, it has interesting physical implications. As a group, \({{\Bbb Z}^{{d_{{\rm{BS}}}}}}\) is generated by d _{BS} independent generators. In the additive notation, natural for an Abelian group, we can write the generators as {b _{ i } : i = 1, …, d _{BS}}, and for any given BS we can expand it similar to elements in a vector space
where \({m_i} \in {\Bbb Z}\) are uniquely determined once the basis is fixed. Therefore, full knowledge of {BS} is obtained once the d _{BS} generators b _{ i } are found.
So far, we have not addressed the effect of TR symmetry, which, being antiunitary, does not lead to new irreps when it is incorporated^{25}. Instead, TR symmetry could force certain irreps to become paired with either itself or another, giving rise to additional constraints on n. Nonetheless, these constraints can be readily incorporated into the definition of \({\cal C}\), and therefore does not affect our mathematical formulation (Methods).
AIs and mismatch classification
While we have provided a systematic framework to probe the structure of {BS}, much insight can be gleaned from a study of AIs. AIs correspond to band insulators constructed by first specifying a symmetric set of lattice points in real space, and then fully occupying a set of orbitals on each of the lattice sites. The possible set of AIs can be easily read off from tabulated data of SGs^{26, 33} (Supplementary Note 2). In addition, once the realspace degrees of freedom are specified, one can compute the corresponding element in {BS}. As stacking two AIs lead to another AI, we see that {AI} ≤ {BS} as groups. Any subgroup of \({{\Bbb Z}^{{d_{{\rm{BS}}}}}}\) is again a free, finitely generated Abelian group, and therefore we conclude
where we denote by {a _{ i }} a complete set of basis for {AI}.
Once {BS} and {AI} are separately computed, it is straightforward to evaluate the quotient group (Supplementary Note 3)
Physically, an entry in X _{BS} corresponds to an infinite class of BSs that, while distinct as elements of {BS}, only differ from each other by the stacking of an AI. By definition, the entire subgroup {AI} collapses into the trivial element of X _{BS}. Conversely, any nontrivial element of X _{BS} corresponds to BSs that cannot be be interpreted as AIs, and therefore X _{BS} serves as a symmetry indicator of topological BSs. One can further show that every element of X _{BS} can be realized by a physical BS (Methods), and therefore X _{BS} indeed corresponds to indicators of band topology in physical systems.
Following the described recipe, we compute {AI}, {BS}, and X _{BS} for all 230 3D SGs in the four symmetry settings mentioned. Results for spinful fermions with TR symmetry, relevant for real materials with or without spin–orbit coupling and no magnetic order, are tabulated in Tables 1–4. The results for other symmetry settings and dimensions (Methods) are presented in Supplementary Tables 5–20.
An interesting observation from this exhaustive computation is the following: for all the symmetry settings considered, we found d _{BS} = d _{AI}, and therefore X _{BS} is always a finite Abelian group. Equivalently, when only symmetry labels are used in the diagnosis, a BS is nontrivial precisely when it can only be understood as a fraction of an AI. In addition, d _{BS} = d _{AI} implies that a complete set of basis for {BS} can be found by studying combinations of AIs, similar to Eq. 3 but with a generalization of the expansion coefficients \({m_i} \in {\Bbb Z}\) to \({q_i} \in {\Bbb Q}\), subjected to the constraint that the sum remains integervalued. Although the full set of compatibility relations is needed in our computation establishing d _{BS} = d _{AI}, using our results the basis of {BS} can be readily computed directly from {AI} (Supplementary Note 3). Since {BS} can be easily found this way, we will refrain from providing a lengthy list of all the bases we found.
To illustrate the ideas more concretely, we discuss a simple example concerning nonTRsymmetric spinless fermions symmetric under SG 106. In this setting, d _{BS} = d _{AI} = 3, and a _{1}, one of the three generators of {AI}, has the property that all irreps appear an even number of times, while the other two generators contain some odd entries. Now consider b _{1}≡a _{1}/2, which is still integervalued. Clearly, by linearity b _{1} satisfies all symmetry constraints, and therefore b _{1}∈{BS}. However, \({{\rm{b}}_1} \notin \left\{ {{\rm{AI}}} \right\} \equiv \left\{ {\mathop {\sum}\nolimits_{i = 1}^3 {{m_i}{{\bf{a}}_i}\!:\,{m_i} \in {\Bbb Z}} } \right\}\), and therefore b _{1} corresponds to a quantum BS, and indeed it is a representative for the nontrivial element of \({X_{{\rm{BS}}}}{\rm{ = }}{{\Bbb Z}_2}\). In addition, if we consider a tightbinding model with a representation content corresponding to a _{1}, the decomposition a _{1} = b _{1 }+ b _{1} implies that it is possible to open a band gap at all highsymmetry momenta at half filling, and thereby realizing the quantum BS b _{1}. It turns out that, in fact, b _{1} corresponds to a fillingenforced QBI (feQBI)^{30}. We will elaborate further on this point in the Supplementary Note 4.
Before we move on to concrete applications of our results, we pause to clarify some subtleties in the exposition. Recall that the notion of BS is defined using the presence of band gaps at all highsymmetry momenta. Generally, however, there can be gaplessness in the interior of the Brillouin zone that coexist with our definition of BS. While in some cases such gaplessness is accidental in nature, in the sense that it can be annihilated without affecting the BS, in some more interesting cases it is enforced by the specification of the symmetry content. This was pointed out in refs ^{13, 14} for inversionsymmetric systems without TR symmetry, where certain assignments of the parity eigenvalues ensure the presence of Weyl points at some generic momenta. When a nontrivial element in X _{BS} can be insulating, we refer to it as as a reQBI; when it is necessarily gapless, we call it a representationenforced semimetal (reSM). We caution that X _{BS} will naturally include both reQBIs and reSMs, although some symmetry settings naturally forbid the notion of reSMs. In fact, one can show that their individual diagnoses are related by X _{SM} = X _{BS}/X _{BI} (Supplementary Note 5). Hence, given an entry of X _{BS} one has to further decide whether it corresponds to a reSM or a reQBI. In Supplementary Note 5, we provide general arguments on the existence of reSMs for systems with significant spin–orbit coupling.
In addition, we also note that, while every BS belonging to a nontrivial class of X _{BS} is necessarily nontrivial, some systems in the trivial class can also be topological. By definition, the representation content of a BS belonging to the trivial class of X _{BS} can be constructed by stacking of AIs. However, if the stacking necessarily involves negative coefficients, the BS cannot be attained from stacking physical AIs, and therefore is still topologically nontrivial. Some of the feQBIs discussed in ref. ^{30} also fall into this category. Alternatively, when the topological nature of a system is undetectable using only symmetry labels, say for the tenfoldway phases in the absence of any spatial symmetries beyond the lattice translations, the system belongs to the trivial element of X _{BS} despite it is topological. The general relation between X _{BS} and the conventional tenfoldway classification depends on the symmetry setting at hand, and its understanding is an important open question (Methods).
Quantum Band Insulators in conventional settings
Having derived a general theory for finding symmetrybased indicators of band topology, we now turn to applications of the results. As a first application, we utilize the results in Table 3 to look for reQBIs that are not diagnosed by previously available topological invariants. In particular, we will focus on a result concerning one of the most wellstudied symmetry setting: materials with significant spin–orbit coupling symmetric under TR, lattice translations and inversion (SG 2).
As shown in Table 3, \({X_{{\rm{BS}}}} = {\left( {{{\Bbb Z}_2}} \right)^3} \times {{\Bbb Z}_4}\) for SG 2. Using the FuKane criterion^{8}, one can verify that the strong and weak TIs, respectively, serve as the generators of the \({{\Bbb Z}_4}\) and \({{\Bbb Z}_2}\) factors. This identification, however, fails to account for the nontrivial nature of the doubled strong TI, which being a nontrivial element in \({{\Bbb Z}_4}\) corresponds to a reQBI. It is also not covered in the earlier lines of work focusing on inversionsymmetric insulators^{13, 14, 16}. This reQBI possesses a trivial magnetoelectric response (θ = 0) and is not expected to have protected surface states.
Nonetheless, the nontrivial nature of the reQBI can be seen from its entanglement spectrum, which exhibits protected gaplessness related to the parity eigenvalues of the filled bands (Fig. 2a). In the present context, we define the entanglement spectrum as the collection of singleparticle entanglement energies arising from a spatial cut, which contains an inversion center and is perpendicular to a crystalline axis. Refs ^{13, 14, 16} showed that the entanglement spectrum of TR and inversion symmetric insulators generally have protected Dirac cones at the TR invariant momenta of the surface Brillouin zone. These Dirac cones carry effective integer charges under inversion symmetry, and as a result they are symmetryprotected. The doubled strong TI phase has twice the number of Dirac cones as the regular strong TI (Fig. 2b).
Yet, one must use caution in interpreting the nontrivial nature of such entanglement, since inversionsymmetric AIs also have protected entanglement surface states whenever the center of mass of an electronic wavefunction is pinned to the entanglement cut. The presence of these entanglement signatures, however, is dependent on the arbitrary choice of the location of the cut, and therefore is not as robust as the other topological characterizations. In contrast, since we have already quotient out all AIs in the definition of X _{BS}, the reQBI at hand must have a more topological origin. This is verified from the pictorial argument in Fig. 2a–c, where we contrast the entanglement spectrum of the doubled strong TI with those that can arise from AIs. Importantly, we see that the total Diraccone charge of an AI is always 0 mod 4, whereas the doubled strong TI has a charge of 2 mod 4. This implies that the entanglement gaplessness is independent of the arbitrary choice of the cut, and in fact shows that the bulk computation of X _{BS} can be reproduced by considering the entanglement spectrum for this symmetry setting. Note that, if TR is broken, Kramers paring will be lifted and the irrep content of this reQBI becomes achievable with an AI. This suggests that the reQBI at hand is protected by the combination of TR and inversion symmetry. It is an interesting open question to study whether or not this reQBI has any associated quantized physical response^{13}.
We note that, since the strong TI is compatible with any additional spatial symmetry, the argument above is applicable to any centrosymmetric SGs. Indeed, as can be seen from Table 3, all of them have X _{BS} ≥ 4, consistent with our claim. Therefore, the doubled strong TI phase could be realizable in a large number of materials classes. Finally, we remark that the same X _{BS} is found for SG 2 in all the other symmetry settings, although their physical interpretations are different. In particular, the generators of \({{\Bbb Z}_4} < {X_{{\rm{BS}}}}\) correspond to a reSM in the other settings. This observation also shows that the doubled strong TI phase remains nontrivial in the absence of spin–orbit coupling.
Latticeenforced semimetals
As another application of our results, we demonstrate how the structure of {BS} exposes constraints on the possible phases of a system arising from the specification of the microscopic degrees. We will in particular focus on the study of semimetals, but a similar analysis can be performed in the study of, say, reQBIs.
As a warmup, recall the physics of (spinless) graphene, where specifying the honeycomb lattice dictates that the irrep at the K point is necessarily 2D, and therefore the system is guaranteed to be gapless at half filling. Using the structure of {BS} we described, this line of reasoning can be efficiently generalized to an arbitrary symmetry setting: any specification of the lattice degrees of freedom corresponds to an element A ∈ {AI}, and one simply asks if it is possible to write A = B _{v} + B _{c}, where B _{v,c} ∈ {BS} satisfies the physical nonnegative condition, such that B _{v} corresponds to a BS with a specified filling ν. Whenever the answer is no, the system is guaranteed to be (semi)metallic. We refer to any such system as a leSM. Note that a stronger form of symmetryenforced gaplessness can originate simply from the electron filling, and such systems were dubbed as fillingenforced semimetal (feSMs)^{34, 35}. We will exclude feSMs from the definition of leSMs, i.e., we only call a system a leSM if the filling ν is compatible with some band insulators in the same symmetry setting, but is nonetheless gapless because of the additional lattice constraints.
A preliminary analysis reveals that leSMs abound, especially for spinless systems with TR symmetry. This is in fact anticipated from the earlier discussions in refs ^{36,37,38}. Instead, we will turn our attention to TRinvariant systems with significant spin–orbit coupling, which lies beyond the scope of these earlier studies and oftentimes leads to interesting physics^{1, 7, 30}. A systematic survey of them will be the focus of another study. Here, we present a proofofconcept leSM example we found, which arises in systems symmetric under SG 219 (F \(\bar 4\)3c). We will only sketch the key features of the model, and the interested readers are referred to the Methods section for details of the analysis.
We consider a lattice with two sites in each primitive unit cell, and that each site has a local environment corresponding to the cubic point group T (Fig. 2d). We suppose the relevant onsite degrees of freedom transform under the fourdimensional irreducible corepresentation of T under TR symmetry^{25}, and that the system is at half filling, i.e., the filling is ν = 4 electrons per primitive unit cell. Although the local orbitals are partially filled, generically a band gap becomes permissible once electron hopping is incorporated. Naively, for the present problem this may appear to be the likely scenario, since the momentumspace irreps all have dimensions ≤4^{25} and band insulators are known to be possible at this filling^{34, 35}. However, using our framework one can prove that no BS is possible for this system at ν = 4, implying that there is irremovable latticeenforced gaplessness at some highsymmetry line. This is indeed verified in Fig. 2e, where we plot the BS obtained from an example tightbinding model (Methods).
Discussion
In this work, we present a simple mathematical framework for efficiently analyzing BSs as entities defined globally over the Brillouin zone. We further utilize this result to systematically quantify the mismatch between the momentumspace and realspace descriptions of free electron phases, obtaining a plethora of symmetry settings for which topological materials are possible.
Our results concern a fundamental aspect of the ubiquitous band theory. For electronic problems, we demonstrated the power of our approach by discussing three particular applications, predicting both QBIs and semimetals (see also Supplementary Note 4). We highlight four interesting future directions below: first, to incorporate the tenfoldway classification into our symmetrybased diagnosis of topological materials^{28}; second, to discover quantized physical responses unique to the phases we predicted^{13, 14, 18}; third, to extend the results to magnetic SGs^{25}; and lastly, to screen materials database for topological materials relying on fast diagnosis invoking only symmetry labels^{39}. More broadly, we expect our analysis to shed light on any other fields of studies, most notably photonics and phononics, where the interplay between topology, symmetry, and BSs is of interest.
Note added: Recently, ref. ^{40} appeared, which has some overlap with the present work, in that it also identifies topological band insulators by contrasting them with AIs. However, the present work differs from ref. ^{40} in important ways in the formulation of the problem and the mathematical approach adopted.
Methods
Glossary of abbreviations
For brevity, we have introduced several abbreviations in the text. For the readers’ convenience, we provide a glossary of the lessstandard ones here.
AI (atomic insulator): band insulators possessing localized symmetric Wannier functions.
BS (band structure): a set of energy bands separated from all others by band gaps above and below at all highsymmetry momenta.
fe (fillingenforced): referring to attributes that follow from the electron filling of the system.
le (latticeenforced): referring to attributes that follow from the specification of the microscopic degrees of freedom in the lattice.
QBI (quantum band insulators): band insulators, with or without protected surface states, that do not admit any atomic limit provided the protecting symmetries are preserved.
re (representationenforced): referring to attributes that follow from knowledge on the symmetry representations of the energy bands.
SG (space group): any one of the 230 spatial symmetry groups of crystals in three dimensions.
SM (semimetals): filled bands with gap closings that are stable to infinitesimal perturbations.
TI (topological insulator): \({{\Bbb Z}_2}\) TIs in two or three dimensions for spin–orbitcoupled system with TR symmetry (note that we use this phrase in a restricted sense in this work).
Threedimensional BSs
In the main text, we have illustrated the definition and interpretation of {BS} using a simple 1D example. In the following we summarize the key generalizations required to address 3D systems. A more detailed discussion is presented in Supplementary Notes 1 and 2.
Similar to the 1D example, in the general 3D setting a collection of integers, corresponding to the multiplicities of the irreps in the BS, is assigned to each highsymmetry momentum. By the gap condition imposed in the definition of a BS, these integers are invariant along highsymmetry lines. In addition, any pair of symmetryrelated momenta will share the same labels. Altogether, we see that the symmetry content of a BS, together with the number of bands ν, is similarly specified by a finite number of integers, which we call D. Therefore, these symmetry labels can be identified as elements of the group \({{\Bbb Z}^D}\), where group addition corresponds to the physical operation of stacking BSs. As discussed, however, these integers are again subjected to the compatibility relations, which arise whenever a highsymmetry momentum is continuously connected to another with a lower symmetry. By continuity, the symmetry content of the BS at the lowersymmetry momentum is fully specified by that of the highersymmetry one, giving rise to linear constraints we denote collectively by the matrix \({\cal C}\). The group {BS} is then defined as in Eq. 1, and again we find
where as before \({d_{{\rm{BS}}}} = {\rm{dim}}\,\ker \,{\cal C}\). Note that this result has a simple geometric interpretation: from the definition Eq. 1, we can picture \({\rm{ker}}\,{\cal C}\) as a d _{BS}dimensional hyperplane slicing through the hypercubic lattice \({{\Bbb Z}^D}\) embedded in \({{\Bbb R}^D}\) (Supplementary Note 3). This gives rise to the sublattice \({{\Bbb Z}^{{d_{{\rm{BS}}}}}}\) (Fig. 1b).
Effect of TR symmetry
Being antiunitary, TR alone does not modify the irreps. However, under the action of TR an irrep can be paired to either a distinct copy of itself, or to another irrep^{25}. The constraints arising from both cases can be readily incorporated into the definition of \({\cal C}\): when under TR an irrep α at k is paired with a different irrep β at k′, where k′ = k or k′ = −k, we simply add to \({\cal C}\) an additional compatibility relation \(n_{\bf{k}}^\alpha {\rm{ = }}n_{{\bf{k}}\prime }^\beta \); when α is paired with itself, we demand α to be an even integer, which can be achieved by redefining \(\tilde n_{\bf{k}}^\alpha \equiv n_{\bf{k}}^\alpha {\rm{/}}2\) and a corresponding rewriting of C in terms of \({\tilde {\bf n}}\).
Note that, although TR is not included in our definition of highsymmetry momenta, we will always take Kramers degeneracy in spin–orbitcoupled systems into account.
Physical aspects of the mathematical treatment
While we have shown in the main text that {BS} is a welldefined mathematical entity and identified its general structure, it remains to connect it to the study of physical BSs. Here, we first argue that as long as B ∈ {BS} satisfies the physical condition of nonnegativity, namely all entries of B are nonnegative integers, then B corresponds to a physically realizable BS. Next, we will show that all entries of X _{BS} have physical representatives. Below, we will only sketch the arguments involved. Interested readers are referred to Supplementary Note 3 for a more elaborated discussion.
Recall that in motivating the definition Eq. 1, in order to obtain a group structure we have lifted the physical condition that all irreps must appear a nonnegative number of times. This implies that any physical BS must correspond to elements in the subset \({\left\{ {{\rm{BS}}} \right\}_{\rm{P}}} \equiv {\rm{ker}}\,{\cal C} \cap {\Bbb Z}_{ \ge 0}^D \subset \left\{ {{\rm{BS}}} \right\}\). However, one should question whether all elements in {BS}_{P} indeed correspond to some physical BSs. This can be reasoned by noting that as {BS} is defined as the solution of all compatibility relations, all necessary band crossings and degeneracies have been taken into account. Therefore, by adjusting the energetics of a sufficiently general physical model one can realize any element of {BS}_{P}, up to accidental degeneracies that can be removed by symmetrypreserving perturbations.
Next, we argue that all entries in X _{BS} have physical representatives. Suppose an element of X _{BS} is represented by a B ∈ {BS}, which does not satisfy the physical condition of nonnegativity. Using a small technical corollary we discuss in the Supplementary Note 2, one can show that the representation content of any B can be rectified by stacking with some A ∈ {AI}, i.e., B + A ∈ {BS}_{P}. Since B + A belongs to the same class as B in X _{BS}, we arrive at a physical representative of the same element of X _{BS}.
Extension to other symmetry settings
Results for TRsymmetric systems in any of the 230 SGs are presented in the main text, and the corresponding ones for systems without TR symmetry are presented in Supplementary Tables 5–8. Here, we remark that the corresponding results for quasi1D and 2D systems, described, respectively, by rod and layer group symmetries^{26, 41}, can be readily obtained (Supplementary Note 3). The results are presented in Supplementary Tables 9–20. In particular, we found \({X_{{\rm{BS}}}} = {{\Bbb Z}_1}\), the trivial group, for all quasi1D systems. This is consistent with the picture that topological BSs in 1D can be understood as frozen polarization states, which are AIs and hence trivial in our definition.
Relation to Ktheorybased classifications
As discussed, band topology identified within the Ktheory framework may not be detectable using only symmetry labels. As an example, consider a 2D system with only lattice translation symmetries. For such systems, the Ktheory classification of band insulators in refs ^{22, 24, 28} gives \({{\Bbb Z}^2}\), where the two factors correspond, respectively, to the electron filling (i.e., number of bands) and the Chern number. In contrast, within our approach we find \(\{ {\rm{BS}}\} = \{ {\rm{AI}}\} = {\Bbb Z}\), since in this setting the only symmetry label is the filling, which cannot detect the Chern number of the bands. Furthermore, as there exists an AI for any filling ν, we find \({X_{{\rm{BS}}}} = {{\Bbb Z}_1}\), the trivial group.
However, in some other cases using symmetry labels alone one can also detect the tenfoldway phases, as in cases where the FuKane parity criterion applies^{8}. As a related problem, one can readily study how a centrosymmetric SG constrains the possible weak TI phases using our results in Table 3. This is related to the number of factors in X _{BS}, i.e., the number of independent generators N _{g}. As one such factor is reserved for the strong TI, the SG is compatible with at most N _{ g } − 1 independent weak TI phases. While this has been pointed out for certain cases in the literature^{42}, our approach automatically encapsulates some of these result in a simple manner.
Example of leSMs
Here, we provide details on the leSM example discussed in the main text. We consider a TRsymmetric system in SG 219 with significant spin–orbit coupling. We will establish that for a particular lattice specification, a semimetallic behavior is unavoidable at a filling ν = 4, although band insulators are generally possible at this filling for the present symmetry setting^{34, 35}. This arises from the fact that, given the available symmetry irreps specified by the lattice, corresponding to an element A ∈ {AI}, there is no way to satisfy all the compatibility relations at the filling ν = 4, i.e., A ≠ B _{v} + B _{c} for any nonzero B _{v}, B _{c} ∈ {BS} satisfying the physical condition of nonnegativity.
We consider a lattice in Wyckoff position a, which contains two sites at r _{1} ≡ (0, 0, 0) and r _{2} ≡ (1/2, 0, 0) in the unit cell. The two sites are related by a glide symmetry, and the sitesymmetry group for each site is given by the point group T (i.e., the orientationpreserving symmetries of a tetrahedron, also known as the chiral tetrahedral symmetry group). We suppose the physically relevant degrees of freedom arise from the three p _{ x,y,z } orbitals on each site, which together with electron spin leads to a sixdimensional local Hilbert space. We will let L and S, respectively, denote the orbital and spin angular momentum operators in the singleparticle basis.
As described in the main text, we consider a TRsymmetric system with a strong crystalfield splitting:
where c _{ r } represents the sixdimensional (column) vector corresponding to the internal degrees of freedom. One can verify that when Δ > 0, H _{Δ} splits the local energy levels to a total spin1/2 doublet lying below the total spin3/2 multiplet. While we have chosen H _{Δ} to conserve the total spin L + S for convenience, such conservation is not required by the local symmetry, which is described by the point group T < SO(3). Therefore, the total spin quantum numbers are not a priori good quantum numbers for the problem at hand. However, one can verify that the spinful, TR symmetric irreps of T coincide with the total spin decomposition described above^{25}, and hence insofar as symmetries are concerned H _{Δ} is a sufficiently generic crystalfield Hamiltonian. We also note that, if TR symmetry is broken, the fourfold degenerate states originating from the total spin3/2 states can be further split.
As discussed in the main text, we are interested in the systems arising from half filling the fourfold degenerate local energy levels. To this end, we assume Δ is the dominant energy scale in the problem, which implies the lowlying doubly degenerate states can be decoupled from the description of the system as long as they are fully filled. This leaves behind the fourfold degenerate energy levels, which we assume are halffilled. As there are two symmetryrelated sites in each unit cell, these considerations altogether imply that the BS around the Fermi energy is described by an effective eightband tightbinding model at filling ν = 4.
Next, we consider a nearestneighbor hopping term
where h.c. denotes Hermitian conjugate, and the notation \(\mathop {\sum}\nolimits_{g \in {\cal G}} {g\left( \ldots \right){g^\dag }} \) denotes all the terms generated by transforming the terms in the parenthesis by the symmetry elements of the SG \({\cal G}\).
The BS of the full Hamiltonian H = H _{Δ} + H _{ t,λ } is shown in Fig. 2e, with parameters (t/Δ, λ/Δ) = (0.01, 0.05). Note that we have only shown the eight bands near the Fermi energy; four fully filled bands arising from the doubly degenerate local orbitals are separated in energy by \({\cal O}(\Delta )\). As our computation dictates, the lattice specification gives rise to energy bands that are necessarily gapless along the highsymmetry lines at filling ν = 4. Interestingly, note that the latticeenforced gaplessness is of a more subtle flavor: unlike spinless graphene, where the the gaplessness is enforced by the dimensions of the irreps involved, here all the irreps have dimensions ≤4, and therefore the impossibility of finding a BS at ν = 4 is reflected in the connectivity of the energy bands.
In closing, we remark that the notion of leSM is not as robust as the other notions we introduced in this work, say feSM or reQBI. Specifically, the (semi)metallic behavior of the system is protected by the specification of the microscopic degrees of freedom, which is only sensible assuming a certain knowledge about the energetics of the problem. Under stacking of a trivial phase, say when we incorporate into the description a set of fully filled bands corresponding to an AI, the enforced gaplessness may become unstable, as these apparently inert degrees of freedom can also supply the representations needed to open a gap at the targeted filling. This can be readily seen from the example above: if we switch the sign of Δ, the same electron filling will now correspond to the full filling of the fourfold degenerate multiplet on each site, which leads to an AI. Such instability should be contrasted with, say, the notion of reQBIs, which by definition remains nontrivial as long as the extra degrees of freedom we introduce are in the trivial class, i.e., correspond to AIs.
Data availability
All relevant data are available from the authors upon reasonable request.
Change history
10 October 2017
A correction to this article has been published and is linked from the HTML version of this article.
References
 1.
Franz, M. & Molenkamp, L. (eds). Topological Insulators, Contemporary Concepts of Condensed Matter Science Vol. 6 (Elsevier, 2013).
 2.
Bernevig, B. A. & Hughes, T. L. Topological Insulators and Topological Superconductors. (Princeton University Press, 2013).
 3.
Hasan, M. Z. & Kane, C. L. Colloquium: topological insulators. Rev. Mod. Phys. 82, 3045–3067 (2010).
 4.
Fu, L. Topological crystalline insulators. Phys. Rev. Lett. 106, 106802 (2011).
 5.
Hsieh, T. H. et al. Topological crystalline insulators in the SnTe material class. Nat. Commun. 3, 982 (2012).
 6.
Chang, C. Z. et al. Experimental observation of the quantum anomalous hall effect in a magnetic topological insulator. Science 340, 167–170 (2013).
 7.
Bansil, A., Lin, H. & Das, T. Colloquium: topological band theory. Rev. Mod. Phys. 88, 021004 (2016).
 8.
Fu, L. & Kane, C. L. Topological insulators with inversion symmetry. Phys. Rev. B 76, 045302 (2007).
 9.
Bernevig, B. A., Hughes, T. L. & Zhang, S. C. Quantum spin hall effect and topological phase transition in HgTe quantum wells. Science 314, 1757–1761 (2006).
 10.
König, M. et al. Quantum spin hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).
 11.
Hsieh, D. et al. A topological Dirac insulator in a quantum spin hall phase. Nature 452, 970–974 (2008).
 12.
Zhang, H. et al. Topological insulators in Bi_{2}Se_{3}, Bi_{2}Te_{3} and Sb_{2}Te_{3} with a single Dirac cone on the surface. Nat. Phys. 5, 438–442 (2009).
 13.
Turner, A. M., Zhang, Y., Mong, R. S. K. & Vishwanath, A. Quantized response and topology of magnetic insulators with inversion symmetry. Phys. Rev. B 85, 165120 (2012).
 14.
Hughes, T. L., Prodan, E. & Bernevig, B. A. Inversionsymmetric topological insulators. Phys. Rev. B 83, 245132 (2011).
 15.
Fang, C., Gilbert, M. J. & Bernevig, B. A. Bulk topological invariants in noninteracting point group symmetric insulators. Phys. Rev. B 86, 115112 (2012).
 16.
Turner, A. M., Zhang, Y. & Vishwanath, A. Entanglement and inversion symmetry in topological insulators. Phys. Rev. B 82, 241102 (2010).
 17.
Taherinejad, M., Garrity, K. F. & Vanderbilt, D. Wannier center sheets in topological insulators. Phys. Rev. B 89, 115102 (2014).
 18.
Lu, Y. M. & Lee, D. H. Inversion symmetry protected topological insulators and superconductors. Preprint at https://arxiv.org/abs/1403.5558 (2014).
 19.
Wan, X., Turner, A. M., Vishwanath, A. & Savrasov, S. Y. Topological semimetal and Fermiarc surface states in the electronic structure of pyrochlore iridates. Phys. Rev. B 83, 205101 (2011).
 20.
Shiozaki, K., Sato, M. & Gomi, K. Z _{2} topology in nonsymmorphic crystalline insulators: Möbius twist in surface states. Phys. Rev. B 91, 155120 (2015).
 21.
Shiozaki, K., Sato, M. & Gomi, K. Topology of nonsymmorphic crystalline insulators and superconductors. Phys. Rev. B 93, 195413 (2016).
 22.
Freed, D. S. & Moore, G. W. Twisted equivariant matter. Annales Henri Poincaré 14, 1927–2023 (2013).
 23.
Gomi, K. Twists on the torus equivariant under the 2dimensional crystallographic point groups. SIGMA 13, 014 (2017).
 24.
Shiozaki, K., Sato, M. & Gomi, K. Topological crystalline materials  general formulation, module structure, and wallpaper groups. Preprint at https://arxiv.org/abs/1701.08725 (2017).
 25.
Bradley, C. J. & Cracknell, A. P. The Mathematical Theory of Symmetry in Solids: Representation Theory for Point Groups and Space Groups (Oxford University Press, 1972).
 26.
Aroyo, M. I., Kirov, A., Capillas, C., PerezMato, J. M. & Wondratschek, H. Bilbao Crystallographic Server II: Representations of crystallographic point groups and space groups. Acta Crystallogr. Sect. A 62, 115–128 (2006).
 27.
Slager, R.J., Mesaros, A., Juričić, V. & Zaanen, J. The space group classification of topological bandinsulators. Nat. Phys. 9, 98–102 (2013).
 28.
Kruthoff, J., de Boer, J., van Wezel, J., Kane, C. L. & Slager, R. J. Topological classification of crystalline insulators through band structure combinatorics. Preprint at https://arxiv.org/abs/1612.02007 (2016).
 29.
Soluyanov, A. A. & Vanderbilt, D. Wannier representation of \({{\Bbb Z}_2}\) topological insulators. Phys. Rev. B 83, 035108 (2011).
 30.
Po, H. C., Watanabe, H., Zaletel, M. P. & Vishwanath, A. Fillingenforced quantum band insulators in spinorbit coupled crystals. Sci. Adv. 2, e1501782 (2016).
 31.
Alexandradinata, A. & Bernevig, B. A. Berryphase description of topological crystalline insulators. Phys. Rev. B 93, 205104 (2016).
 32.
Read, N. Compactlysupported Wannier functions and algebraic Ktheory. Phys. Rev. B 95, 115309 (2017).
 33.
Hahn, T. (ed). International Tables for Crystallography. 5th edn, Vol. A (Springer, 2006).
 34.
Watanabe, H., Po, H. C., Vishwanath, A. & Zaletel, M. P. Filling constraints for spinorbit coupled insulators in symmorphic and nonsymmorphic crystals. Proc. Natl Acad. Sci. USA 112, 14551–14556 (2015).
 35.
Watanabe, H., Po, H. C., Zaletel, M. P. & Vishwanath, A. Fillingenforced gaplessness in band structures of the 230 space groups. Phys. Rev. Lett. 117, 096404 (2016).
 36.
Michel, L. & Zak, J. Connectivity of energy bands in crystals. Phys. Rev. B 59, 5998–6001 (1999).
 37.
Michel, L. & Zak, J. Elementary energy bands in crystalline solids. Eur. Phys. Lett 50, 519–525 (2000).
 38.
Michel, L. & Zak, J. Elementary energy bands in crystals are connected. Phys. Rep 341, 377–395 (2001).
 39.
Chen, R., Po, H. C., Neaton, J. B. & Vishwanath, A. Topological materials discovery using electron filling constraints. Preprint at https://arxiv.org/abs/1611.06860 (2016).
 40.
Bradlyn, B. et al. Topological quantum chemistry. Preprint at https://arxiv.org/abs/1703.02050 (2017).
 41.
Kopský, V. & Litvin, D. B. (eds). International Tables for Crystallography. 2nd edn, Vol. E (Wiley, 2010).
 42.
Varjas, D., de Juan, F. & Lu, Y. M., Space group constraints on weak indices in topological insulators. Preprint at https://arxiv.org/abs/1603.04450 (2016).
Acknowledgements
We thank C.M. Jian, A. Turner and M. Zaletel for insightful discussions and collaborations on earlier works. We also thank C. Fang for useful discussions. A.V. and H.C.P. were supported by NSF DMR1411343. A.V. acknowledges support from a Simons Investigator Award. H.W. acknowledges support from JSPS KAKENHI Grant Number JP17K17678.
Author information
Affiliations
Contributions
All authors contributed to all aspects of this work.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Change History: A correction to this article has been published and is linked from the HTML version of this article.
An erratum to this article is available at https://doi.org/10.1038/s4146701700724z.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Po, H.C., Vishwanath, A. & Watanabe, H. Symmetrybased indicators of band topology in the 230 space groups. Nat Commun 8, 50 (2017). https://doi.org/10.1038/s41467017001332
Received:
Accepted:
Published:
Further reading

Topological crystalline phases in a disordered inversionsymmetric chain
Physical Review B (2021)

Temperaturedependent electronic structure and topological property of the Kondo semimetal CeFe2Al10
Physical Review B (2021)

Correlated fragile topology: A parton approach
Physical Review B (2021)

Topology and broken Hermiticity
Nature Physics (2021)

Pressure effect on band inversion in AECd2As2 (AE=Ca, Sr, Ba)
Physical Review B (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.