Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Note
  • Published:

Surface wettability of poly(vinylidene fluoride) nanoparticle assembly surfaces

Abstract

Poly(vinylidene fluoride) (PVDF) is one of the most extensively used polymers for superhydrophobic coatings because of its low surface free energy and inertness to various chemicals. Based on general rules, not only a low surface free energy but also high surface roughness is required for preparing artificial superhydrophobic surfaces. Therefore, enhancement of the hydrophobicity of PVDF coatings is commonly conducted through a two-stage method: incorporation of micro/nanoparticles into the PVDF matrix and postcoating with low-surface-energy materials. In our previous work, a nonsolvent-induced crystallization method was applied to obtain PVDF nanostructure assemblies with different surface morphologies through the selection of various nonsolvents. In this work, we investigated how morphologies influenced the surface wettability of PVDF nanostructure assembly coatings. The coatings consisting of nanoparticles exhibited highly improved hydrophobicity compared with that of the flat drop-coating PVDF surface. As the portion of nanoparticles increased, the roughness of the surfaces increased, as did the water contact angle (WCA). In the case of surfaces composed of nanoparticles (60–250 nm in diameter), superhydrophobic and oleophilic properties were achieved with a high air-pocket fraction, as described by the Cassie–Baxter model. These results provide valuable insight into PVDF surface design, especially for superhydrophobic coatings.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Scheme 1
Fig. 1
Scheme 2
Fig. 2
Fig. 3

References

  1. Barthlott W, Neinhuis C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta. 1997;202:1–8.

    Article  CAS  Google Scholar 

  2. Wang S, Li Y, Fei X, Sun M, Zhang C, Li Y, et al. Preparation of a durable superhydrophobic membrane by electrospinning poly (vinylidene fluoride) (PVDF) mixed with epoxy-siloxane modified SiO2 nanoparticles: A possible route to superhydrophobic surfaces with low water sliding angle and high water contac. J Colloid Interface Sci. 2011;359:380–8.

    Article  CAS  PubMed  Google Scholar 

  3. Hamzah N, Leo CP. Membrane distillation of saline with phenolic compound using superhydrophobic PVDF membrane incorporated with TiO2 nanoparticles: Separation, fouling and self-cleaning evaluation. Desalination. 2017;418:9–88.

    Article  Google Scholar 

  4. Cui M, Xu C, Shen Y, Tian H, Feng H, Li J. Electrospinning superhydrophobic nanofibrous poly(vinylidene fluoride)/stearic acid coatings with excellent corrosion resistance. Thin Solid Films. 2018;657:88–94.

    Article  CAS  Google Scholar 

  5. Cao L, Jones AK, Sikka VK, Wu J, Gao D. Anti-Icing superhydrophobic coatings. Langmuir. 2009;25:12444–8.

    Article  CAS  PubMed  Google Scholar 

  6. Hai A, Durrani AA, Selvaraj M, Banat F, Haija MA. Oil-water emulsion separation using intrinsically superoleophilic and superhydrophobic PVDF membrane. Sep Purif Technol. 2019;212:388–95.

    Article  CAS  Google Scholar 

  7. Nishino T, Meguro M, Nakamae K, Matsushita M, Ueda Y. The lowest surface free energy based on -CF3 alignment. Langmuir. 1999;15:4321–3.

    Article  CAS  Google Scholar 

  8. Wenzel RN. Resistance of solid surfaces to wetting by water. Ind Eng Chem Res. 1936;28:988–94.

    Article  CAS  Google Scholar 

  9. Cassie ABD, Baxter S. Wetting of porous surfaces. Trans Faraday Soc. 1994;40:546–51.

    Article  Google Scholar 

  10. Tijing LD, Woo YC, Shim W, Tao H, Choi J, Kim S, et al. Superhydrophobic nanofiber membrane containing carbon nanotubes for high-performance direct contact membrane distillation. J Memb Sci. 2016;502:158–70.

    Article  CAS  Google Scholar 

  11. Radwan AB, Mohamed AMA, Abdullah AM, Al-Maadeed MA. Corrosion protection of electrospun PVDF-ZnO superhydrophobic coating. Surf Coat Technol. 2016;289:136–43.

    Article  CAS  Google Scholar 

  12. Lee E, An AK, Hadi P, Lee S, Woo YC, Shon HK. Advanced multi-nozzle electrospun functionalized titanium dioxide/polyvinylidene fluoride-co-hexafluoropropylene (TiO2/PVDF-HFP) composite membranes for direct contact membrane distillation. J Memb Sci. 2017;524:712–20.

    Article  CAS  Google Scholar 

  13. Wei C, Dai F, Lin L, An Z, He Y, Chen X, et al. Simplified and robust adhesive-free superhydrophobic SiO2-decorated PVDF membranes for efficient oil/water separation. J Memb Sci. 2018;555:220–8.

    Article  CAS  Google Scholar 

  14. Lu KJ, Zuo J, Chang J, Kuan HN, Chung TS. Omniphobic hollow-fiber membranes for vacuum membrane distillation. Environ Sci Technol. 2018;52:4472–80.

    Article  CAS  PubMed  Google Scholar 

  15. Razmjou A, Arifin E, Dong G, Mansouri J, Chen V. Superhydrophobic modification of TiO2 nanocomposite PVDF membranes for applications in membrane distillation. J Memb Sci. 2012;415–416:850–63.

    Article  Google Scholar 

  16. Zhang W, Shi Z, Zhang F, Liu X, Jin J, Jiang L. Superhydrophobic and superoleophilic PVDF membranes for effective separation of water-in-oil emulsions with high flux. Adv Mater. 2013;25:2071–6.

    Article  CAS  PubMed  Google Scholar 

  17. Mendez Ecoscia AC, Sheibat-Othman N, McKenna TFL. Reaction engineering of the emulsion homopolymerization of vinylidene fluoride: Progress and challenges. Can. J Chem Eng. 2019;97:207–16.

    CAS  Google Scholar 

  18. Fu C, Zhu H, Hoshino N, Akutagawa T, Mitsuishi M. Interfacial nanostructuring of poly(vinylidene fluoride) homopolymer with predominant ferroelectric phases. Langmuir. 2020;36:14083–91.

    Article  CAS  PubMed  Google Scholar 

  19. Zhu H. Interfacial preparation of ferroelectric polymer nanostructures for electronic applications. Polym J. 2021;53:877–86.

    Article  CAS  Google Scholar 

  20. Vazquez G, Alvarez E, Navaza JM. Surface tension of alcohol + water from 20 to 50 °C. J Chem Eng Data. 1995;40:611–4.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The work was supported by the Research Program of “Dynamic Alliance for Open Innovation Bridging Human, Environment and Materials” in “Network Joint Research Center for Materials and Devices”.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Huie Zhu or Masaya Mitsuishi.

Ethics declarations

Conflict of interest

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fu, C., Zhu, H. & Mitsuishi, M. Surface wettability of poly(vinylidene fluoride) nanoparticle assembly surfaces. Polym J 54, 741–746 (2022). https://doi.org/10.1038/s41428-021-00612-w

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41428-021-00612-w

Search

Quick links