Chiral nanomaterials with intrinsic chirality or spatial asymmetry at the nanoscale are currently in the limelight of both fundamental research and diverse important technological applications due to their unprecedented physicochemical characteristics such as intense light-matter interactions, enhanced circular dichroism, and strong circularly polarized luminescence. Herein, we provide a comprehensive overview of the state-of-the-art advances in liquid crystal-templated chiral nanomaterials. The chiroptical properties of chiral nanomaterials are touched, and their fundamental design principles and bottom-up synthesis strategies are discussed. Different chiral functional nanomaterials based on liquid-crystalline soft templates, including chiral plasmonic nanomaterials and chiral luminescent nanomaterials, are systematically introduced, and their underlying mechanisms, properties, and potential applications are emphasized. This review concludes with a perspective on the emerging applications, challenges, and future opportunities of such fascinating chiral nanomaterials. This review can not only deepen our understanding of the fundamentals of soft-matter chirality, but also shine light on the development of advanced chiral functional nanomaterials toward their versatile applications in optics, biology, catalysis, electronics, and beyond.
Chirality is omnipresent in living organisms and nature. Chiral architectures can be found at a variety of hierarchical levels, ranging from atomic, molecular to supramolecular, macroscopic, and galactic scales (Fig. 1a)1,2. Chirality is known to be of paramount significance for multidisciplinary fields from biology, medicine, material science to high-energy physics. In biology, homochirality is believed to be a prerequisite for the genesis of life, however, the origin of biological homochirality, i.e., the selection of left-handed (L) amino acids and right-handed (D) sugars as molecular building blocks of life, has remained a great mystery since its discovery in the 19th century3. In medicine, chirality is a fundamental hallmark in drug development, evidenced by the fact that many of the drugs discovered are chiral. Interestingly, one enantiomer of chiral drugs may be highly effective for a particular disease, whereas the opposite enantiomer may be inactive and even toxic4. It should be noted that the chirality at a molecular scale is inherently weak, and extending the chirality from molecules to nanomaterials could bring many new opportunities for the design and synthesis of emerging chiral functional nanomaterials with a remarkable improvement in circular dichroism (CD) and polarization rotation, features that hold immense technological applications in sensing, imaging, medicine, catalysis, nonlinear optics and advanced electronics5,6. Chiral nanomaterials are expected to act as a powerful bridge platform for fundamental research of the chirality transfer and amplification between molecules and bulk materials since their physical and chemical properties can be facilely tailored by modulating their shape, size, charge, composition, and functional groups7. Recently, we have witnessed many outstanding achievements about synthesis, property, and application of chiral nanomaterials8,9,10,11, and great endeavors have been devoted to developing advanced chiral nanomaterials with marked enhancement of optical asymmetry, dynamic and tunable chirality, as well as unprecedented chiroptical activity in various specific wavelengths ranging from the ultraviolet, visible to near-infrared and terahertz regions12,13,14. There is no doubt that chiral functional nanomaterials are currently at the forefront of both fundamental research and technological applications.
Most nanomaterials are known to thermodynamically exhibit achiral crystal structures. To obtain chiral nanomaterials, researchers have developed two mainstream bottom-up strategies to introduce intrinsic chirality or spatial asymmetry into advanced functional nanostructures15,16. The most straightforward method is the enantioselective synthesis of chiral nanocrystals with mirror-asymmetric geometry via seed-mediated colloidal growth. Various chiral nanomaterials with a broken mirror and inversion symmetry have been successfully achieved using either chiral amino acids and peptides17,18,19,20 or chiral co-surfactant micelles21 as molecular modifiers (Fig. 1b). Interestingly, nanoscale chirality can also be realized from directed self-assembly of achiral functional nanoparticles using various chiral soft templates such as DNA22,23,24,25, peptide and protein26,27, liquid crystal (LC)1,2,28,29, chiral polymer30,31,32, and organogelators33,34,35,36,37 (Fig. 1c). Chiral nanomaterials based on emerging soft templates have been considered as the model system for investigating their inter-particle coupling, high-order self-organized nanostructures, and responsive dynamic properties, which can bring up a variety of potential applications38,39,40. For example, chiral nanomaterials based on nanoscale plasmonic building blocks, i.e., chiral plasmonic nanomaterials, have been demonstrated to show novel plasmon coupling or collective plasmonic properties that are usually absent in their discrete counterparts41,42,43,44,45,46,47. Chiral plasmonic nanomaterials could exhibit unprecedented enhanced CD, amplified dissymmetry factor (g-factor), engineerable and dynamic chiroptical responses41, thus holding a great opportunity in plasmon-based technological applications, such as chiral sensing48,49, chirality detection50,51,52, surface-enhanced spectroscopies53,54, and beyond55,56. By using novel chiral soft templates, nanoscale luminescent building blocks are able to self-organize into chiral luminescent nanomaterials exhibiting significantly enhanced circularly polarized luminescence28,57,58,59,60,61. Thanks to their promising photophysical properties, chiral luminescent nanomaterials have attracted significant attention in diverse areas, such as biological science62, 3D display63, spintronics64,65, enantioselective photochemistry36,66 and information encryption67,68.
Among the different chiral soft templates, liquid-crystalline soft templates are highly attractive for guiding the self-assembly of nanoscale functional building blocks into high-order chiral nanomaterials due to their inherent long-range ordered molecular assemblies that couple liquid fluidity with crystal ordering from molecular to macroscopic hierarchical levels69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84. As a matter of fact, chiral liquid-crystalline nanoarchitectures widely exist in many living organisms, such as in certain plant tissues, cuticles of insects and arthropods, including snail shells, beetle cuticles, butterfly wings, among others85,86,87,88. For example, the cuticle of jewel beetles Chrysina gloriosa exhibits selectively and circularly polarized iridescence due to the existence of chiral or cholesteric nanoarchitecture in their exoskeletons85 (Fig. 1d). Recently, many researchers have devoted themselves to the design and synthesis of advanced chiral functional nanomaterials using liquid-crystalline soft templates. Benefiting from chiral self-assembly feature of diverse chiral liquid-crystalline phases, such as 1D chiral nematics89, 2D chiral smectics, and 3D blue phases90,91,92,93,94,95,96,97,98,99,100,101,102,103,104, it is possible to transfer their chirality and periodicity into functional nanomaterials with unique and unprecedented functionalities. In this review, we present a comprehensive review of the state-of-the-art advances of liquid crystal-templated chiral nanomaterials and their promising applications. First, the critical chiroptical properties of chiral nanomaterials are introduced. Then, an overview of chiral functional nanomaterials is showcased, which includes chiral plasmonic nanomaterials based on thermotropic and lyotropic liquid crystal templates, as well as chiral luminescent nanomaterials based on different nanoscale building blocks, such as emerging inorganic quantum dots, perovskite nanocrystals, and upconversion nanoparticles. Finally, we conclude this review with an outlook on the potential scope, opportunities, and future challenges in emerging applications of these intriguing chiral functional nanomaterials. This review is expected to not only deepen the understanding of the fundamentals of soft-matter chirality, but also bring new twists in the development of advanced chiral functional nanomaterials and their promising applications in the fields of chiral plasmonics and transformational chiral photonics such as optical spintronics, quantum communication, optical information processing, and beyond.
Chiroptical properties of chiral nanomaterials
The strong interaction of chiral nanomaterials with electromagnetic waves in the spectral regions, ranging from microwave and terahertz to infrared, visible and ultraviolet regions, is the fundamental basis for the generation of enhanced chiroptical activity and related optical spectroscopic characterization technologies105,106,107,108,109. Generally, the light coming from either sunlight or other light sources can be considered as unpolarized light, in which its electromagnetic waves, i.e., electric and magnetic fields, are emitted and randomly propagated at different polarization angles and varying rapidly in time. In contrast, polarized light can be described simply as a wave vibrating in a particular direction and, depending on the wave vector path perpendicular to the direction of propagation of the light wave, it can be classified as partially, elliptically, linearly, and circularly polarized light110. For instance, linearly polarized light has its electromagnetic fields, orthogonal to each other, but being the electric-field polarized along the x-axis. Circularly polarized light is a combination of two linearly polarized orthogonal waves of the same amplitude but with a phase difference of π/2, resulting from passing linearly polarized light through a quarter-wave plate; however, this process causes the loss of about 50% of light due to both the process of passing through the plates and the conversion of the unpolarized light into linearly polarized light (Fig. 2a). The handedness of circularly polarized light is determined by the rotational orientation of the vector of a wave approaching an observer, if the approaching light is rotating clockwisely, the light is right-hand circularly polarized light; otherwise, it is called left-hand circularly polarized light. It is worth noting that chiral nanomaterials can manifest themselves optically via a different response to right- or left-hand circularly polarized light.
Optical spectroscopy, such as CD spectroscopy that originates from the differential absorption of left-hand and right-hand circularly polarized light, has been considered as one of the most widely used techniques for the in-depth investigation of chiroptical properties of chiral functional nanomaterials111,112. For measurement, alternately left-hand and right-hand circularly polarized light generated from a xenon lamp is passed through optically active chiral nanomaterials. The CD spectrum is then obtained by comparing the intensity of the original and the remaining light (Fig. 2b). The observation of a peak or valley in the CD spectrum is known as the Cotton effect, which is the characteristic shift of the CD near an absorption band of a compound (Fig. 2c). Upon decreasing the wavelength, if the CD increases first, then the Cotton effect is positive, otherwise it is negative2. It is important to note that due to their proportionality, the oscillator strength (a positive quantity) and the rotational strength (a positive or negative quantity) determine the transition intensity in the absorption and CD spectra, respectively. Consequently, such optical signals are always positive in the absorption spectra, while positive or negative signals are found in the CD spectrum depending on the sign of the rotational force.
For chiral plasmonic nanomaterials, as shown in Fig. 2c, the resonant plasmonic coupling between individual nanoscale building blocks results in the appearance of bisignated CD signals in the spectral region of plasmon resonances, which is also known as exciton coupled circular dichroism (ECD)105. For right-handed chiral nanomaterials, a positive signal in the bisigned CD spectrum is often observed within the long-wavelength region and a negative signal observed in the short wavelength region. It should be noted that both signals are reversed for left-handed chiral nanomaterials. The dissymmetry factor (g-factor) is always used to measure polarization efficiency, so that we can exclude the influence of the concentration of sample and the path length of light. Specifically, the CD dissymmetric degree can be quantified using the absorptive dissymmetry factor (gabs, also known as gCD), a dimensionless quantity expressed as the difference between the absorbance of right-hand and left-hand circularly polarized light (AL/R) in comparison to the absorbance of nonpolarized light (A) at a given wavelength105:
It is worth noting that in Eq. 1b, the absorbance in the denominator is expressed as the average of the absorbances of right-hand and left-hand circularly polarized light. However, both definitions for gabs (Eqs. 1a, b) are employed indistinctly in the research105. Experimentally, the value of gabs is defined as Eq. 2:
where the “ellipticity” (unit: mdeg) and the “absorbance” can be directly obtained from CD spectra. Besides the CD spectra, the chiroptical activity of chiral nanomaterials can also be measured by optical rotation dispersion (ORD) and vibrational circular dichroism (VCD)5. For CD and ORD, they are mathematically connected via the Kronig-Kramers equation. CD is based on the absorption difference when circularly polarized light is passed through a chiral matrix, while ORD arises from the scattering difference. The main difference of CD and VCD is that they work in different optical wavelength ranges. CD spectrum is located in the ultraviolet-visible region while VCD is located in the infrared region.
For chiral luminescent nanomaterials, there is another important chiroptical property, i.e., circularly polarized luminescence (CPL). Such nanomaterials upon being excited are capable of emitting light as they relax to the ground state through a process called luminescence. Analogously to CD spectroscopy, CPL spectroscopy is used to measure the difference between the intensity of light emitted with right-hand and left-hand circular polarization, as illustrated in Fig. 2d111. For measurement, unpolarized light is used to excite the sample, and the emitted light is passed through a circular analyzer composed of a photoelastic modulator and linear polarizers. The very-low-frequency photoelastic modulator alternately converts the right- or left-hand circularly polarized light into linearly polarized light, which then passes through the linear polarizers to finally reach the monochromator and detector. It is advisable to quantify the chiroptical property of an emissive chiral nanomaterial using the luminescence dissymmetry factor (glum or gem). In strict analogy with the gabs in Eq. (1b), glum is expressed as the ratio of the difference between the intensity of right-hand and left-hand circularly polarized emission (IL − IR) to the average intensity of emitted light at a given wavelength (Eq. 3)111:
It is very clear that Eq. 1b and Eq. 3 share a similar mathematical expression. Interestingly, the values for both CD and CPL vary between +2 to −2, with ±2 being the maximum value when there is an ideal right-hand or left-hand circular polarization of emitted light, whereas a zero value indicates the absence of CPL. It should be noted that chiral luminescent nanomaterials normally display the Cotton effect, but the CD signals do not ensure the observation of CPL signals. This can be attributed to the fact that the absorption always occurs from a state at thermal equilibrium, whereas luminescence occurs from an excited state. Therefore, the CPL spectrum elucidates both conformational and configurational properties of the excited state, whereas CD provides useful information of the ground state. In addition to optical spectroscopy, many morphological characterization technologies, such as transmission electron microscope (TEM), scanning electron microscope (SEM), atomic force microscope (AFM) and scanning tunneling microscope (STM) have been widely applied for direct observation or visualization of chiral functional nanomaterials113.
It should be noted that chiral plasmonic nanomaterials are known to exhibit strong CD but gabs is very low. Most chiral nanomaterials strongly scatter the light and the gabs is often between 10−4 and 10−2, which is much lower than that for chiral liquid crystal114,115,116. Recently, Liu et al. overcame this limitation by establishing the long-range self-assembly of plasmonic nanoparticles, similar to the liquid crystals. It was found that liquid crystal-like order could significantly convert low-gabs plasmonic nanoparticles into high-gabs chiral nanomaterials with an increase of more than 4600-fold117. Interestingly, chiral liquid-crystalline templates have been widely applied for effectively amplifying the glum of chiral luminescent nanomaterials28. Basically, cholesteric or chiral nematic liquid crystals (CLCs) with helical nanostructures are the most common method used for glum amplification with chiral liquid-crystalline templates. One of the features that makes CLCs the most attractive chiral templates is the photonic bandgap effect, that is, the selective reflection of circularly polarized light with the same handedness while the transmission of the opposite one. This is particularly important for generating large glum from liquid crystal-templated chiral nanomaterials118. When the luminescence peak of chiral nanomaterials does not overlap with the reflection band of CLCs, the optical rotation from CLCs results in a high degree of CPL polarization, and the polarized direction of CPL is mainly determined by the handedness of CLCs. When the luminescence peak of chiral nanomaterials coincides with the reflection band of CLCs, the CPL with the same direction as the helical twist of CLCs is fully reflected, whereas the CPL with the opposite handedness is fully transmitted. For example, Shi et al. conducted experimental and theoretical studies on the emission outside the reflection band of liquid-crystalline templates, and it was found that CLC-templated fluorescent films displayed CPL with glum about 0.8119. Chen et al. reported that almost pure CPL (glum = ∼2) was observed for CLC-templated fluorescent films when the emission occurred inside the reflection band120. Hence, a significantly enhanced glum value is expected to be obtained by localizing the luminescence of chiral nanomaterials at the center of the photonic bandgap of CLCs121,122. However, the loss of at least half of the intensity of the CPL could be an unavoidable issue. To solve the energy loss issue of CLC templates, the development of cholesteric films with hyper-reflection as chiral liquid-crystalline templates will be an effective strategy to obtain CPL with large glum and high emission intensity. In nature, the beetle Plusiotis resplendens is known to exhibit hyper-reflection that breaks through the typical reflectance limit of 50% due to its unique three-layer superstructure, in which a unidirectional layer acting as a half-wave retardation plate is embedded between two layers of left-handed cholesteric layers123. Several strategies have been proposed for the development of chiral liquid crystals with hyper-reflection124,125. For example, Matranga et al. fabricated a biomimetic hyper-reflective liquid-crystalline film by sandwiching an untwisted nematic layer, acting as a half-wave retarder, between multiple cholesteric layers126. This multilayering method is expected to prepare chiral liquid-crystalline templates capable of reflecting both left- and right-handed circularly polarized light. Mitov and Dessaud demonstrated that by introducing a temperature-sensitive chiral molecular switch and controlling the photopolymerization temperature, hyper-reflection can be achieved in a single-layered cholesteric film with left- and right-handed cholesteric nanostructures127. Moreover, a “washout/refill” strategy has been developed to fabricate the single-layered chiral liquid-crystalline templates with hyper-reflection128,129. It is expected that the application of promising multi-layered or single-layered chiral liquid-crystalline templates with hyper-reflection can be an effective strategy for obtaining CPL with large glum and high emission intensity.
Liquid crystal-templated chiral plasmonic nanomaterials
Chiral plasmonic nanomaterials with giant localized surface plasmon resonance (LSPR) have received increasingly significant attention for their emerging potential applications in diverse fields, such as negative-refractive-index materials, ultrasensitive biosensing, enantioselective analysis, and advanced light-polarization filters130,131,132,133,134,135,136,137,138. Compared to conventional top-down fabrication strategy139,140,141,142, the bottom-up self-assembly approach based on chiral soft templates allows for arbitrary and more tailorable structural geometries, thus enabling the development of highly complex chiral plasmonic nanomaterials with engineerable and dynamic chiroptical responses41. In 1996, Burkett and Mann pioneered biolipid-templated chiral nanomaterials, in which the helical edges of lipid ribbons were used as chiral templating patterns to transcribe a roughly helical arrangement of gold nanoparticles143. In 2009, Sharma et al. first reported DNA-templated chiral nanomaterials through the co-assembly of DNA and oligonucleotide functionalized gold nanoparticles into 3D tubules, demonstrating the versatility of DNA-based soft templates and opening the proverbial floodgates to the deep exploration in this area144. In 2012, Kuzyk et al. demonstrated a DNA origami chiral soft template that could offer nine helically-arranged attachment sites for oligonucleotide-modified plasmonic nanoparticles, which led to the development of high fidelity chiral nanomaterials with characteristic bisignated CD signals23. Peptide-based chiral soft templates have been developed for fabricating diverse chiral plasmonic nanomaterials with tailorable chiroptical properties26,145,146,147. Different from other chiral soft templates, chiral liquid-crystalline templates are known to show multitudinous advantageous attributes, such as long-range molecular ordering, structural diversity of chiral mesogenic phases, and superior responsiveness to many external stimuli, such as light, temperature, electric field, mechanical force1,2,77,98. Importantly, many researchers have demonstrated that using chiral liquid crystals as soft templates can effectively amplify the chirality of nanomaterials and increase the optical asymmetry148,149,150,151. In this section, we shall introduce recent endeavors in the development of chiral plasmonic nanomaterials with various thermotropic and lyotropic liquid crystal templates.
Chiral nanomaterials based on thermotropic liquid crystal templates
Thermotropic liquid crystals are known to exhibit different mesophases upon changing the temperature within a certain range. They are made up of mesogenic compounds exhibiting diverse molecular geometries, such as rod-like (calamitic), disk-like (discotic), bowl-like (bowlic), bent-shaped or banana-shaped structures152,153,154,155. Generally, the development of single-component chiral mesogens and the construction of host-guest material systems have been the two most widely adopted methods for introducing chirality into thermotropic liquid crystals. The latter method is accomplished by the addition of appropriate mesogenic or non-mesogenic chiral dopants into an achiral liquid-crystalline host. Chiral thermotropic liquid crystals could show a variety of mesophases, such as CLCs with helicoidal organization, chiral smectic with spontaneous polarization, twist grain boundary (TGB) phase with frustrated helical superstructures, and blue phases with cubic nanostructures156,157. CLCs are one of the most commonly used thermotropic liquid-crystalline templates, which can serve as surface ligands or host matrices to guide the self-assembly of discrete and nanoscale plasmonic building blocks into chiral plasmonic nanomaterials. In 2002, Mitov et al. obtained long-range ordered chiral nanomaterials by doping platinum nanoparticles into a CLC host matrix89. They found that the dispersed nanoparticles were self-organized into well-defined ribbons that mimicked the fingerprint pattern of the CLC template because they showed an affinity for regions where the liquid crystal molecules were parallel to the plane of the film158. The distance between the ribbons was found to highly depend on the chirality of the CLC template and could be facilely controlled by adjusting the helical pitch. In recent years, many researchers have devoted extensive efforts to the design and synthesis of chiral plasmonic nanomaterials through capping plasmonic nanoparticles with mesogenic ligands and controlling their bottom-up self-assembly process159,160,161,162,163,164,165,166. For example, Cseh et al. obtained chiral plasmonic nanomaterials from the gold nanoparticles coated with cholesterol-based chiral mesogenic ligands without the addition of a separate liquid-crystalline matrix (Fig. 3a)167. The resulting chiral plasmonic nanomaterials were found to exhibit a chiral columnar liquid-crystalline phase owing to the cholesteric arrangement of the mesogens with threaded gold nanoparticle strands (Fig. 3b). The layers of gold columns superimposed at a small twist angle to each other coiled around the vertical axis forming a helix. Upon annealing, a columnar liquid-crystalline nanostructure was gradually formed with the nanoparticles forming strands in a regular oblique 2d lattice as confirmed by grazing-incidence small-angle X-ray scattering (GI-SAXS), and a significant increase of the synchrotron radiation CD signal at the isotropic-to-liquid-crystalline phase transition temperature was also observed (Fig. 3c–i). The disclosed strategy opened a new direction for the design of plasmonic metamaterials or chiral plasmonic nanomaterials that can selectively interact with circularly polarized light. Similarly, Yu et al. reported the preparation of chiral plasmonic nanomaterials using chiral discogen ligands-functionalized gold nanoparticles, which formed a stable chiral discotic nematic phase in the liquid-crystalline state168. Bhat et al. directly synthesized mesogenic ligands-encapsulated chiral gold nanoparticles by in situ reductions of Au(III) to Au(0), and demonstrated their self-assembling into a fluid/frozen chiral nanomaterials exhibiting a strong CD activity169. By attaching photoactive chiral mesogenic ligands to the surface of gold nanoparticles, Bhardwaj et al. reported photoresponsive chiral plasmonic nanomaterials exhibiting dynamic regulation of electromagnetic response170. The resulting chiral nanomaterials were found to exhibit tunable epsilon-near-zero behavior with a bandwidth of ∼45 nm in the visible spectrum, which can be enhanced by a factor of 1.6 upon UV illumination. The concept of sergeant-soldier rule171,172,173, which means that large volumes of achiral molecules (regarded as soldiers) obey the conformation of small amounts of chiral dopants (regarded as sergeants) to afford helical torsion, has been considered an effective approach to amplify supramolecular chirality. It was also found that the LSPR effect of plasmonic nanomaterials can be utilized for significantly amplifying the chirality of surrounding chiral species174,175,176. Mesogen-functionalized chiral plasmonic nanoparticles can directly function as chiral nanodopants to induce the formation of chiral nematic liquid crystals. The chiral plasmonic nanomaterials could also exhibit larger chiral correlation lengths, long-range interactions between chiral molecules and plasmonic nanomaterials, and enhanced g-factor for chiral molecules in the vicinity of plasmonic nanomaterials177,178,179. Interestingly, an array biconvex converging microlens with robust imaging capabilities has been fabricated using liquid crystal-templated chiral plasmonic nanomaterials180.
Recently, emerging bent-core mesogens exhibiting the B4 phase or so-called helical nanofilament (HNF) phase have been used as chiral liquid-crystalline templates for fabricating chiral plasmonic nanomaterials44,159,181,182,183,184,185,186,187. For example, Lewandowski et al. judiciously designed and synthesized a dimeric liquid-crystalline template (L–L), which can self-organize into the HNF phase showing hierarchical and tailorable nanostructures and drive the self-assembly of L-ligand-functionalized gold nanoparticles into ordered chiral plasmonic nanomaterials188. The presence of plasmonic nanoparticles did not affect the nucleation and growth processes of the HNFs, so they ended up located at the lateral boundaries of the structure, thus stabilizing the air-HNF assembly (Fig. 4a–c). The resulting chiral nanomaterials showed outstanding long-range hierarchical order across length scales and their thickness could be reversibly modulated thanks to the dynamic and reconfigurable nature of liquid-crystalline materials (Fig. 4d). The self-assembly process can be facilely controlled by changing the cooling rate from the isotropic phase, and adjusting the molar ratio between the nanoparticles and LC matrix. It should be noted that a spontaneous symmetry breaking process can be observed in the HNF phases, because at the nucleation stage the formed dendritic domains do not show preferential handedness, i.e., left-handed and right-handed helical nanomaterials are obtained with equal probability, resulting in racemic samples at bulk scale (Fig. 4e, f).
Interestingly, the identification and mechanical removal of domains formed in homochiral nanomaterials allow the measurement of plasmonic CD signals from microscale regions189. By using micro-CD measurements, Szustakiewicz et al. could directly identify the handedness of specific domains based on the sign of the ΔExt, where the ΔExt indicates the difference between extinction of right-handed and left-handed circularly polarized light. CD signals with a visible Cotton effect were observed around the LSPR absorbance peak upon selective removal of domains with the same handedness. To control the chirality on a bulk scale, Grzelak et al. fabricated a centimeter-scale thin film of chiral nanomaterials with plasmonic CD by temperature-driven self-assembly of a mixture composed of a liquid-crystalline matrix, a chiral dopant, and gold nanoparticles190. The strategy proved to efficiently select chirality by allowing the chiral dopant to act in the nucleation phase and provide an enantiomeric excess of HNFs of a given handedness in the thin film (Fig. 5a–c). A series of experimental parameters, such as size, content and morphology of nanoparticles and amount of chiral dopant, were systematically investigated to optimize chiral plasmonic films. Interestingly, double-helical assemblies of gold nanoparticles were observed in the resulting chiral plasmonic thin films (Fig. 5d). Helically twisted 1D chains were obtained in large spherical nanoparticles named as Au10 and Au15 (10 and 15 nm in diameter, respectively), while small Au4 NP formed helically twisted 2D ribbons. In contrast, the Au20 NRs (8 × 20 nm) were found to be preferentially coupled side-by-side in the nanostructured plasmonic film (Fig. 5e). The size of gold nanoparticles was shown to be positively correlated with the plasmonic CD intensity (Fig. 5f), and variation of the film temperature could allow reversible switching of the chiroptical response. Moreover, stretchable chiral plasmonic films were fabricated through thermal nanoimprinting and transfer-printing of the films onto a flexible substrate, and the resulting flexible film was found to exhibit a decreasing CD strength upon stretching and a recoverable chiroptical response upon relaxation.
Chiral nanomaterials based on lyotropic liquid crystal templates
Lyotropic liquid crystals are known to exhibit diverse mesophases such as nematic, lamellar, cholesteric, cubic, and hexagonal columnar phases, as a function of the concentration of anisotropic suspensions with amphiphilic compounds or colloidal nanoparticles at appropriate solvents1,2,191,192,193,194,195,196,197. The formation of lyotropic liquid-crystalline phases has been observed in many material systems such as lipid, tobacco mosaic virus (TMV), deoxyribonucleic acid (DNA), and cellulose nanocrystals (CNCs)198,199,200,201, which could function as chiral soft templates to guide the self-assembly of plasmonic nanoparticles into optically active nanomaterials. For example, CNCs have received extensive attention due to its renewable, nontoxic, and low-cost properties197. CNCs are known as negatively charged, highly crystalline, high-aspect-ratio rod-like nanocrystals that are able to self-organize into a chiral nematic liquid-crystalline phase in sufficiently concentrated aqueous suspensions202. The helical organization can be preserved in free-standing solid CNC films through an evaporation-induced self-assembly (EISA) process, which makes CNCs an attractive chiral soft templating matrix compared to other lyotropic systems in solution environments and suitable for large-scale production203,204,205. Kumacheva et al. reported chiral plasmonic films via introducing plasmonic gold nanorods into a CNC-based cholesteric liquid-crystalline template206 (Fig. 6a). The resulting chiral plasmonic films not only preserved the cholesteric ordering of the CNC template but also retained the plasmonic resonance of gold nanoparticles, resulting in strong resonant plasmonic-photonic coupling and distinctive plasmon-induced chiroptical activity206,207,208,209. The CD responses of CNC-templated chiral plasmonic films could be tuned by changing the fabrication conditions such as size, surface charge and concentration of plasmonic components as well as helical pitch of the CNC template. Lukach et al. demonstrated that the concentration of plasmonic nanoparticle components exhibited a significant influence on the chiroptical properties of CNC-templated chiral plasmonic films compared to size and surface charges208. At sufficiently high concentration of plasmonic components in the films, a splitting in the CD signal was observed with the minima coinciding with the spectral position of extinction plasmonic peaks. Smalyukh’s research group demonstrated that the anisotropic plasmonic nanoparticles were uniaxially aligned with their long axes parallel to the local director of the liquid-crystalline domains of CNC-based chiral soft template, and polarization-dependent LSPR effect was observed (Fig. 6b–d)210,211. Chu et al. demonstrated CNCs-templated hybrid chiral nematic films by the coalignment of anisotropic plasmonic silver nanowires and CNCs host matrix, in which tunable chiroptical properties and a maximum g-factor of 0.108 has been achieved212. It was found that the CD signals of the hybrid films could be modulated by changing the electrostatic repulsions between CNCs and slender silver nanowires. To shorten the processing time (4–6 days) and improve color uniformity of CNC-based chiral soft template, Feng et al. found that the introduction of a surfactant in CNC matrix could greatly enhance the orientation of multidomains in CNCs, and the existent surfactant was beneficial to increase the miscibility of plasmonic components and CNCs, resulting in chiral plasmonic films with uniform color and plasmonic chiroptical property213. Majoinen et al. reported that using individual CNC nanorods as soft template could also allow plasmonic chiroptical activity in dilute aqueous dispersions at nano/colloidal scale214. The nanoscale fibrillar chiral plasmonic nanomaterials were formed by electrostatically bonding the plasmonic components to individual CNC nanorods, and thus resulting in a marked chiral right-handed plasmonic CD signal. It should be noted that the handedness of CD signal was opposite to that of left-handed plasmonics of their liquid-crystalline assemblies due to inherent right-handed twist along CNC nanorod axis (Fig. 6e). Moreover, mesoporous CNC films215 or CNC-templated silica films216,217 were also used as chiral templates for fabricating plasmonic nanomaterials with intense chiroptical activity.
In addition to the widely used CNC-based chiral soft templates, amyloid fibrils, which are known as twisted and helical nanofibers from the self-assembly of β-sheet aggregates218, were also used as chiral liquid-crystalline templates. The self-assembly of amyloid fibrils is intimately associated with their orientation and ordering, which can be easily tailored by changing the concentration of aqueous amyloid dispersions219,220,221. For example, Marzán et al. used amyloid fibrils as chiral soft templates to prepare chiral plasmonic nanomaterials179,222, where the dispersed nanoscale plasmonic building blocks were guided into a chiral conformation, and a strong plasmonic CD response was obtained. Recently, Liu et al. reported human islet amyloid polypeptides (hIAPPs)-templated chiral plasmonic nanomaterials exhibiting significantly enhanced optical asymmetry g-factors117. By mimicking the long-range ordering of chiral liquid-crystalline molecules, high optical asymmetry at the nanoscale level was achieved with the self-assembly of gold nanorods into long helical chain-like nanorods after being conjugated to hIAPPs (Fig. 6f). Plasmonic CD signals of the bisignated line shape were observed upon nanohelix peptides-directed self-assembly of plasmonic building blocks. The intensity of the CD spectra was found to be as high as 2000 millidegrees (Fig. 6g, h), and the optical asymmetry g-factor of the chiral plasmonic nanomaterials reached a value of up to 0.12 (Fig. 6i), which was found to be more than 4600 times higher than that of the monomer. The plasmonic building blocks assembled into a long-range ordered chain with end-to-end orientation and left-handed nanohelices (Fig. 6j, k). The chiral nanomaterials were straight and up to 50 plasmonic building blocks were in registry with each other (Fig. 6l). The chiral response could be tuned by adjusting the nanorod’s size and the helix pitch. This work shines new light on the development of liquid crystal-templated chiral plasmonic nanomaterials and their emerging applications in complex biological media.
Liquid crystal-templated chiral luminescent nanomaterials
Chiral luminescent nanomaterials exhibiting strong CPL are of overarching significance from the perspective of fundamental research and many technological applications since the circular polarization can function as a carrier of chemical or biological information for interdisciplinary fields such as biology, optics, photonics, spintronics optoelectronics, polarization-based information encryption, and related fields223,224,225. The conventional chiral luminescent nanomaterials through capping chiral ligands onto the surface of nanoparticles often exhibit a low luminescence efficiency and a low-glum value within the range of 10−4–10−3 226,227,228. To address this problem, many alternative bottom-up self-assembly strategies have been developed for efficient amplification of nanoscale chirality in luminescent nanomaterials229,230,231. For instance, Tang et al. demonstrated supramolecular self‐assembly of chiral gold clusters with CD but free of CPL in crystalline nanocubes, and the resulting chiral nanomaterials were found to exhibit remarkably amplified CD intensity along with the appearance of the CPL signal232. Huo et al. reported white CPL-active chiral luminescent nanomaterials by supermolecular co-assembly of achiral quantum dots and chiral gelators33. Although the glum value could be increased by about an order of magnitude through the supramolecular self‐assembly approach, the values remain very low and far from the theoretical perfect value. Interestingly, chiral liquid-crystalline templates were found to be capable of effectively amplifying the glum of chiral luminescent nanomaterials66,233,234. Recently, a variety of emerging nanoscale building blocks such as inorganic quantum dots, perovskite nanocrystals, and upconversion nanoparticles have been applied for the development of liquid crystal-templated chiral luminescent nanomaterials exhibiting significantly enhanced circularly polarized luminescence. In this section, advanced chiral luminescent nanomaterials based on chiral liquid-crystalline templates are mainly introduced.
Chiral quantum dots
Chiral quantum dots (QDs) combine the luminescent properties of quantum dots with the chiroptical activity of chiral nanomaterials, which can broaden their applicability to enantiomeric recognition and separation, asymmetric catalysis, bioimaging, and luminescence sensing235. Many researchers have devoted themselves to the design, synthesis, and properties of chiral quantum dots236,237,238. In 2013, Chiral ligand-induced chiroptical activity was observed in originally achiral semiconductor quantum dots239. Suzuki et al. demonstrated the generation of chirality on graphene quantum dots covalently functionalized with L/D-cysteine moieties240. Deka et al. designed and synthesized the fluorescent chiral carbon dots by incomplete carbonization of different chiral precursor molecules241. Li et al. synthesized the chiral carbon dots by the hydrothermal treatment of L- or D-cysteine, which can mimic topoisomerase I to mediate topological rearrangement of supercoiled DNA with enantioselectivity242,243. It should be noted that capping or covalent modification with other chiral molecules are the main strategies to introduce chirality in quantum dots. However, many challenging issues still exist such as complex synthesis procedures and weak CPL signals with glum values in the range of approximately 10−3–10−2 227.
Recently, the use of chiral liquid crystals as soft templates to endow quantum dots with chiroptical activity has become a new research focus. Among various quantum dots, semiconductor quantum dots are widely used as nanoscale luminescent components to be incorporated into chiral liquid-crystalline templates due to their high quantum yield, tunable emission wavelengths, and good photophysical stability. For example, chiral luminescent nanomaterials have been reported through enclosing achiral semiconducting quantum dots in chiral liquid-crystalline templates, and the resulting chiral nanomaterials showed optically or electrically controlled CPL via conformational changes in the helical structure of chiral liquid-crystalline templates244,245,246. Shi et al. reported chiral luminescent nanomaterials by doping semiconductor quantum rods (QRs) into CNC-based chiral liquid-crystalline template247. The optical activity could be manipulated by regulating the relative position between the luminescent band of quantum rods and the photonic bandgap of CNCs, and reaching a maximum glum value of -0.45 when the luminescent band was located at the center of the photonic bandgap. Xu et al. demonstrated optical coding labels upon the introduction of semiconductor quantum dots into photonic CNC templates68. Thanks to left-handed 1D photonic nanostructures, iridescent photonic CNC templates with strong CD were able to transmit right-handed circularly polarized light and reflect left-handed circularly polarized light248,249, resulting in right-handed CPL. As a result, the code could be observed through a right-handed circular polarizer compared to a left-handed one. Interestingly, stretchable CNC template can be utilized to develop dynamic chiroptical systems that enables dynamic tuning of CPL by spatially changing the pitch or orientation when subjected to external stimuli250,251,252. For example, Kang et al. developed a novel chiral luminescent nanostructured film with dynamically reversible chiroptical properties by crosslinking chiral co-assembly of semiconductor quantum nanorods (QNRs) and CNCs into an elastomeric polyurethane matrix (Fig. 7a–c)250. The resulting chiral luminescent nanostructured film exhibited vivid structural color and generated strong CPL with glum of 0.2. It is worth noting that the asymmetric circularly polarized luminescence could be converted to linearly polarized light emission thanks to the mechanically induced transformation from a cholesteric helical superstructure to a unidirectional nematic nanostructure when the film was stretched (Fig. 7d–f). In addition, by introducing functional quantum dots into CNC-templated chiral nematic silica, free-standing chiral mesoporous films with simultaneous iridescence and luminescence were also demonstrated, and such luminescent mesoporous material could be used to detect traces of TNT explosives253.
Fluorescent carbon quantum dots share the unique electronic and optical characteristics of semiconductor quantum dots and offer great advantages over the existing limitations such as elemental shortages and/or intrinsic toxicity due to heavy metal use in the production of semiconductor quantum dots254,255,256. Many efforts have been devoted to the development of liquid crystal-templated chiral luminescent carbon quantum dots. For example, Zheng et al. fabricated circularly polarized luminescent nanostructured films via evaporation-induced cooperative assembly of carbon dots and CNCs suspensions257. By tuning the photonic bandgap of CNCs and the emission band of carbon dots, the resulting luminescent nanostructured films exhibited strong and multicolor-tunable right-handed CPL with glum up to −0.74 (Fig. 8a, b). It was found that superior photoemission intensity can be achieved when illuminating with right-handed circularly polarized light compared to left-handed circularly polarized light, thanks to the selective transmission of right-handed circularly polarized light and the low attenuation imparted by the left-handed helical superstructures of CNCs (Fig. 8c–h). Xu et al. observed both CPL and circular polarized room-temperature phosphorescence (CPRTP) after the evaporation-induced self-assembly of CNCs, carbon dots and poly(vinyl alcohol) (PVA)258. CNCs/PVA could prevent the non-radiative relaxation by forming hydrogen bonds with carbon dots and stabilize the triplet state excitons, whereas carbon dots can foster the intersystem crossing (ISC) to populate triplet excitons that were protected and relaxed within the chiral matrix. It was found that CPL appeared under UV excitation while CPRTP occurred after removal of the excitation light, and therefore, both CPL and CPRTP could be facilely modulated by the photonic bandgaps of the hybrid nanostructured films. For example, right-handed CPL was induced when the emission of carbon dots was located at the center of the photonic bandgap, and left-handed CPL was induced when the emission of carbon dots was far away from the photonic bandgap. To prevent the phase separation and aggregation-caused quenching (ACQ) of carbon quantum dots in the CNC template, Xiong et al. reported the design and synthesis of nanocellulose/quantum dot nanostructured building blocks, and demonstrated flexible chiral luminescent nanomaterials with glum of -0.2 and robust mechanical properties259. Similarly, Chekini et al. reported chiral carbon dots synthesized on CNCs using a hydrothermal method and obtained chiral luminescent suspensions with left-handed CPL toward their potential application as biocompatible nanolabels for bioimaging260.
Chiral perovskite nanocrystals
Perovskites have become promising optoelectronic materials suitable for different applications such as solar cells, photonic lasers, light-emitting diodes (LEDs), and photodetectors261. Perovskites feature the general formula ABX3, where A is a monovalent cation of methylammonium (MA), formamidinium (FA), or Cs; B is a metallic cation of Pb or Sn; X is a halogen either Cl, Br, or I (Fig. 9a, b)262. Perovskite nanocrystals (PNCs) are known to exhibit many exceptional properties, including tailorable crystal nanostructures, high charge carrier mobilities, long electron-hole diffusion length, highly tunable bandgaps, strong spin-orbit couplings, large optical absorption coefficients, and low exciton binding energies263. The optical absorption and emission spectra of colloidal perovskite nanocrystals can be easily tailored over the entire visible spectral region by modulating their composition and nanoparticle size, which is also known as quantum-size effects (Fig. 9c)264. The first report of chirality in perovskites was 1D chiral perovskite nanocrystals in 2003265, and 2D chiral perovskite nanocrystals in 2006266. However, it was not until 2017 that the chiroptical properties of chiral perovskites were investigated in details267, and since then chiral perovskites have attracted enormous research attention. In 2019, Chen et al. reported that the chirality of perovskite nanocrystals could originate from the surface distortion induced by the chiral ligands (Fig. 9d)268. Interestingly, supramolecular self-assembly strategy has also been employed to construct chiral perovskite nanocrystals. For example, Shi et al. demonstrated that the chirality could be generated from surface-modified perovskite nanocrystals via gelator molecules (Fig. 9e)35. Chiral gelators and colorful perovskite nanocrystals could autonomously self-organize into chiral nanotubes in nonpolar solvents, displaying strong mirror-image CPL signals in the full-color range. It is worth noting that strong CD and CPL emission signals with a glum exceeding 6 × 10−3 have been achieved in chiral nanostructured films with helical arrangement of perovskite nanocrystals along the silica helical ribbons269.
Recently, Li et al. reported the judicious design and synthesis of liquid crystal-templated chiral perovskite nanocrystals through the placement of perovskite layer between two chiral liquid-crystalline layers with predefined opposite handedness, and the resulting chiral perovskite nanosystems showed intense CPL emission and significantly enhanced glum (Fig. 10a)270. Thanks to the close relation between the CPL emission and the CLC nanostructured layers, the photonic bandgap of the chiral liquid-crystalline templates could be tailored to overlap with the emission of perovskites for achieving a high-glum value. Taking the right-handed CPL as an example, half of the right-handed CPL directly passed through the left-handed chiral liquid-crystalline layer, while the rest was reflected by the right-handed chiral liquid-crystalline lower layer and subsequently passed through the left-handed chiral liquid-crystalline layer. When a right-handed circular polarizer was placed between the left-handed chiral liquid-crystalline side and the detector, the measured right-handed CPL showed the same peak wavelength but lower intensity compared to the original emission. However, no emission and close-to-zero intensity were obtained when a left-handed circular polarizer was applied. As a result, an achiral perovskite film could be endowed with intense CPL emission with a high-glum value of 1.6. It was also found that the central wavelength of the reflection band exhibited a blue-shifting as the angle of incidence increased, which reduced the overlap of the reflection band and the light emission, and thus, the CPL intensity was highly dependent on the viewing angle (Fig. 10b–e). The chiral perovskite nanomaterials with tailorable and tunable CPL properties could find many emerging optoelectronic applications such as spintronics, 3D displays, quantum computation and beyond. Despite great potential of perovskite nanocrystals in CPL-active nanomaterials and optoelectronic devices, their poor stability remains a daunting problem that hampers their practical application. Perovskite nanocrystals with the dynamic surface are highly sensitive to the environment, such as polar solvents, light, oxygen and heat, due to their intrinsically ionic nature, high surface energy, and easy migration of surface ligands271. Many promising strategies have been developed to improve the stability of perovskite nanocrystals, including surface chemistry engineering, compositional engineering, matrix encapsulation and device encapsulation272,273. For example, Liu et al. found that polyacrylonitrile (PAN) encapsulation could substantially improve luminescent efficiency and long-term stability of perovskite in a polar environment. Stable CPL with a glum value up to 1.9 was further demonstrated by lamination of chiral liquid-crystalline templates. The resulting CPL-active bilayer devices with various graphical patterns and reversible thermal-switching behavior show possibilities for cryptology and anti-counterfeiting applications274. It should be noted that liquid crystal-templated long-range ordered assembly of perovskite nanocrystals has not been reported yet, and the realization of stable dispersion and ordered assembly of perovskite nanocrystals in chiral liquid-crystalline templates could open many new opportunities in chiral luminescent nanomaterials.
Chiral upconversion nanoparticles
Upconversion nanoparticles (UCNPs) are known to be capable of converting low-energy-absorbed photons into high-energy photon emissions via long-lived intermediate energy states of lanthanide ions275,276,277. Unlike conventional luminescent quantum dots, UCNPs have many outstanding advantages, such as large anti-Stokes shifts, negligible auto-fluorescence background, sharp emission peaks, low toxicity and high resistance to photo-bleaching. It should be noted that UCNPs show low light scattering and allow deep penetration of tissues because their excitation occurs in the near-infrared (NIR) region, which is within the optical transparency window278. All of these merits render UCNPs particularly useful in diverse emerging applications, such as photoswitching, biosensing, bioimaging, and advanced information displays279,280,281. For UCNPs, their low luminescence brightness, low extinction coefficients as well as fixed energy levels remain major challenges for unlocking their full potential282. Over the past decade, considerable efforts have been made in the judicious design and synthesis of lanthanide-based UCNPs exhibiting robust photoluminescence properties283. Lanthanide-based UCNPs are typically made of a crystalline host and a lanthanide-ion dopant added in a low concentration (Fig. 11a), in which the dopant acts as luminescent centers while the host lattice offers a crystalline matrix to bring these centers into optimal positions284. UCNPs usually absorb two or more low-energy photons upon NIR irradiation and emit high-energy photons in the UV or visible range via nonlinear anti-Stocks optical process, i.e., upconversion luminescence285. Excited-state absorption (ESA) and energy-transfer upconversion (ETU) are the most efficient mechanisms by which the upconversion process is carried out in lanthanide-based UNCPs286. In the case of ESA, the emitting ions in excited state sequentially absorb at least two additional photons of suitable energy to reach higher excited state287,288. As for ETU, one photon is absorbed by the ion, but subsequent energy transfer between neighboring ions results in the population of a highly excited state of the emitting ion (Fig. 11b)289,290. Most of UCNPs have spherical and dumbbell shapes with core diameters ranging from around 5 to 50 nm (Fig. 11c)291. Moreover, by changing the categories of doped lanthanide ions and the particle size, their luminescence emission can be facilely tuned from the visible to the NIR range under single-wavelength excitation (Fig. 11d)292. Considering the polarization of light, upconverted circularly polarized luminescence can be obtained by modulating the polarization state of upconverted luminescence (Fig. 11e)293. In general, CPL displays the chiroptical properties of chiral luminescent system at the excited state; therefore, higher-energy excitation is needed in most of the developed chiral nanomaterials. Consequently, this type of down-converted CPL has some shortcomings, such as only photons with an energy higher than the HOMO-LUMO gap energy of the emitters can be utilized294,295. Unlike the down-conversion process, the coupling of CPL and photon upconversion enables the conversion of unpolarized lower-energy photons into circularly polarized higher-energy photons through a sequence of energy-transfer steps296,297. Extensive research has been carried out to achieve upconverted CPL, and they can be divided into three categories: two-photon absorption upconversion (TPA-UC)268, triplet-triplet annihilation-based upconversion (TTA-UC)296,298,299,300, as well as lanthanide-doped upconversion nanoparticles with hybrid mechanisms301,302. For example, Jin et al. encapsulated two kinds of achiral UCNPs into chiral nanotubes assembled from chiral gelator as host, and the upconverted CPL with glum around 5.48 × 10−3 was achieved36.
Recently, chiral liquid-crystalline templates have been used to amplify the glum value of the chiral upconversion nanomaterials. Li et al. reported chiral upconversion nanomaterials based on CNC liquid-crystalline template, in which a tunable upconverted CPL emission was obtained with a relatively high tailored glum ranging from −0.156 to −0.033303. Thanks to the strong hygroscopicity of CNC template, the photonic bandgap of the chiral luminescent nanomaterials exhibited an evident red-shifting upon increasing the relative humidity. Decreasing the overlap of the upconverted emission with the photonic bandgap led to an obvious decrease in the upconverted CPL. As a result, the resulting chiral luminescent film exhibited an upconverted CPL with different glum values under different humidity conditions. Yang et al. demonstrated a new strategy to achieve enhanced upconverted CPL via the energy-transfer process from UCNPs to the perovskite nanocrystals in chiral liquid-crystalline template (Fig. 12a–c)304. The perovskite nanocrystals, which served as energy acceptors, allowed to obtain a higher glum value by taking advantage of the intense reflection found at the center of the photonic bandgap of chiral liquid-crystalline template. It was found that enhanced emission of the UCNPs was located at the edge of the photonic bandgap, which could be further reabsorbed by perovskite nanocrystals, thus resulting in improved emission of perovskite nanocrystals. An upconverted CPL with high-glum up to 1.1 was achieved in the resulting chiral luminescent nanomaterials through appropriately modulating the appropriate ratio of donor and acceptor for ensuring the highest efficiency of radiative energy transfer. It is worth noting that the emission of upconverted CPL and the process of radiative energy transfer could be facilely switched off upon applying an electric field, while it would recover to the original state upon applying mechanical force. Moreover, Guo et al. demonstrated NIR light-driven reversible modulation of CPL accompanied by a change in glum through introducing UCNPs and a photoswitch in the chiral liquid-crystalline template305,306,307.
It should be noted that UCNPs can be used as emerging NIR-to-UV/Vis nanotransducers for controlling the self-organization of superstructures of chiral liquid crystals loaded with light-driven molecular photoswitches308,309,310. For instance, Wang et al. demonstrated NIR photoresponsive chiral liquid-crystalline superstructures loaded with a novel chiral azobenzene-based molecular photoswitch and unique NaGdF4:Yb,Tm@NaGdF4 UCNPs. NIR light-driven dynamic and reversible modulation of photonic bandgap across the entire visible spectrum was achieved by changing the 980 nm NIR light intensity308. Interestingly, NIR photoswitchable self-organized helical superstructures were also demonstrated by doping core-multishell UCNPs with a novel chiral dithienylethene-based molecular photoswitch. Unprecedented reversible handedness inversion of chiral liquid-crystalline nanostructures was then achieved by selective and alternating exposure to NIR light with different wavelengths of 980 and 808 nm (Fig. 13a, b)309. Recently, Qiu et al. reported NIR light-driven dynamic and reversible photonic bandgap modulation of blue-phase liquid crystals with chiral 3D nanostructures through the integration of a chiral azobenzene photoswitch and novel core-shell UCNPs (Fig. 13c)310. A red-shift of the photonic reflection towards a longer wavelength was observed upon irradiating the chiral 3D nanostructures with a 808 nm light at high-power density, while blue-shifting took place upon 808 nm NIR light irradiation at lower power density. This research can provide insights into the large-scale fabrication of programmable and reconfigurable chiral 3D photonic nanostructures towards different applications such as soft-matter photonics and future integrated communication technologies.
To summarize the above discussion, an overview of chiral liquid-crystalline templates, fluorescent nanomaterials, glum, and applications of chiral luminescent nanomaterials is presented in Table 1. It is very clear that liquid crystal-templated chiral luminescent nanomaterials exhibit a significantly enhanced CPL with glum > 10−1. However, the enhancement of glum value varies for different chiral luminescent nanomaterials. For example, the maximum glum of lyotropic CNC-templated chiral carbon dots is −0.74, while the glum of lyotropic CNC-templated UCNPs is only −0.156. The glum of chiral luminescent nanomaterials could be affected by diverse factors such as the compatibility of liquid-crystalline templates with fluorescent nanomaterials, the concentration of fluorescent nanomaterials, and the orientational alignment of liquid-crystalline templates. Moreover, the differences in glum values could also result from the non-uniform operating conditions and methods, and the establishment of uniform test standards for evaluating glum values should be of paramount significance for the future development of advanced chiral luminescent nanomaterials. It should be also noted that the ACQ is often unavoidable when embedding high concentration of inorganic quantum dots into chiral liquid-crystalline templates, which results in poor chiroptical properties and low-glum. In this context, many strategies have been proposed to overcome this limitation. The first strategy is to apply the fluorescent nanomaterials as a light-emitting layer to avoid the low compatibility of inorganic quantum dots in chiral liquid-crystalline templates, and a high-glum value of ~1.6 has been demonstrated by such a stacking strategy270. The second strategy is to design and synthesize mesogenic ligand-functionalized quantum dots to improve their miscibility in chiral liquid-crystalline templates. The most promising strategy may be to develop quantum dots exhibiting aggregate-induced emission (AIE) effect to overcome the ACQ311,312. Recently, many efforts have been devoted to introduce organic luminogens with AIE properties into chiral liquid-crystalline templates171,313,314,315,316,317. By supramolecular self-assembly between achiral AIE guests and chiral liquid-crystalline templates, these compounds exhibit strong CPL signals and a large glum value of 1.42 has been reported318.
Conclusions and perspectives
Chiral soft templates provide a powerful and straightforward bottom-up self-assembly strategy for the design and synthesis of chiral nanomaterials with hierarchical architectures and advanced functionalities. Compared to emerging DNA-based soft templates, chiral liquid-crystalline templates are faster, less expensive, and more adaptable to guide the self-assembly of nanoscale building blocks into arbitrary and high-order chiral nanomaterials over a larger range of scales, thanks to their inherent long-range ordered molecular arrangements that combine the liquid fluidity with crystal ordering from atomic-molecular to macroscopic levels. In this review, we offer an account of the state-of-the-art advances on liquid crystal-templated chiral functional nanomaterials, including chiral plasmonic nanomaterials and chiral luminescent nanomaterials. Different thermotropic and lyotropic liquid crystal templates have been applied for fabricating chiral plasmonic nanomaterials with enhanced CD, amplified dissymmetry factor, and dynamic chiroptical responses, which are of paramount significance for many potential applications, such as negative-refractive-index materials, ultrasensitive biosensing, enantioselective analysis, advanced light-polarization filters, and beyond. A variety of emerging nanoscale functional building blocks, such as inorganic quantum dots, perovskite nanocrystals, and upconversion nanoparticles, have been employed for the design and synthesis of novel chiral luminescent nanomaterials exhibiting significantly enhanced circularly polarized luminescence, which could find important applications in many emerging fields, such as biological science, 3D display, information encryption, chiral spintronics, and enantioselective photochemistry.
Despite the great achievements, the development of chiral functional nanomaterials based on the bottom-up soft template strategy remains in its early stages, and there are still many challenges to be addressed for motivating breakthrough research in this significant field. The first one is to develop chiral functional nanomaterials with high optical asymmetry g-factors (gabs for absorption and glum for luminescence), as the reported values are still far from the theoretical value of ±2. The second one is to endow the chiral functional nanomaterials with tunable chiroptical activity to diverse target wavelengths ranging from the ultraviolet, visible, near-infrared to terahertz regions. It is also very important to achieve real-time reconfigurable chiral functional nanomaterials that show ultrasensitive responsiveness to the external environment through the dynamic nature of chiral liquid-crystalline templates. For example, electroresponsive chiral liquid crystals with sub-microsecond response time are particularly interesting for developing ultra-fast chiroptical devices319, and the marriage of chiral liquid-crystalline templates with advanced photoalignment technique and emerging chiral photoswitches could facilitate the breakthrough development of reconfigurable chiral functional nanomaterials320,321,322,323. Thirdly, extensive efforts should be devoted to bridging the research gap from the proof-of-concept on a laboratory scale to the large-scale synthesis of chiral functional nanomaterials and their integration into multi-material hierarchical architectures and even more complex advanced functional devices. Moreover, many other liquid-crystalline phases324,325, such as 2D chiral smectics and 3D blue phases, and inorganic chiral photonic crystals326, can be applied for the development of chiral hierarchical nanomaterials with unprecedented functionalities. Chiral metal-organic frameworks (MOFs), as an emerging class of nanoporous chiral assemblies, could be one of the preeminent chiral template candidates due to their versatile performance in combination with diverse functional nanomaterials327. Owing to the arbitrary design capability, chiral functional nanomaterials can also be constructed with chiroptical properties that may not be readily revealed within their molecular counterparts, such as chirality-dependent mechanical properties328 and magnetically induced chiroptical properties329. Chiral functional nanomaterials that possess 3D stereochirality may act as a powerful platform for fundamental research of the chirality transfer and amplification between nanoscale building blocks and advanced bulk materials. The development of new characterization techniques can deepen our understanding of the enantiospecific and chiroptical effects at the nano- or atomic scale330. The development of chiral spintronics based on chiral magnetic nanomaterials could pave an avenue for their important applications in areas of memory, logic, and memristic analog devices331,332. It is anticipated that the unique combination of liquid-crystalline nanoscience with nanoscale chirality and emerging bottom-up self-assembly will pour vitality into the development of programmable and reconfigurable chiral functional nanomaterials with unlimited possibilities. Future endeavors of scientists and engineers from multidisciplinary research backgrounds will certainly bring new twists into fundamental breakthrough and technological applications of emerging soft-matter chirality and truly advanced chiral functional nanomaterials which embrace biology, optics, electronics, spintronics, physics, chemistry, materials science, device engineering, and other interdisciplinary areas.
Wang, L., Urbas, A. M. & Li, Q. Nature-inspired emerging chiral liquid crystal nanostructures: from molecular self-assembly to DNA mesophase and nanocolloids. Adv. Mater. 32, 1801335 (2020).
Liu, M. H., Zhang, L. & Wang, T. Y. Supramolecular chirality in self-assembled systems. Chem. Rev. 115, 7304–7397 (2015).
Bailey, J. et al. Circular polarization in star- formation regions: implications for biomolecular homochirality. Science 281, 672–674 (1998).
Brooks, W. H., Guida, W. C. & Daniel, K. G. The significance of chirality in drug design and development. Curr. Top. Med. Chem. 11, 760–770 (2011).
Tang, Z. Chiral Nanomaterials: Preparation, Properties and Applications. (Wiley-VCH, 2018).
Kotov, N. A., Liz-Marzán, L. M. & Weiss, P. S. Chiral nanostructures: new twists. ACS Nano 15, 12457–12460 (2021).
Ha, M. J. et al. Multicomponent plasmonic nanoparticles: from heterostructured nanoparticles to colloidal composite nanostructures. Chem. Rev. 119, 12208–12278 (2019).
Fan, J. C. & Kotov, N. A. Chiral nanoceramics. Adv. Mater. 32, 1906738 (2020).
Xiao, L. et al. Novel properties and applications of chiral inorganic nanostructures. Nano Today 30, 100824 (2020).
Ru, Y. et al. Recent advances in chiral carbonized polymer dots: from synthesis and properties to applications. Nano Today 34, 100953 (2020).
Zhang, H. Y. et al. Engineering of chiral nanomaterials for biomimetic catalysis. Chem. Sci. 11, 12937–12954 (2020).
Guan, Y. D. et al. Chiral plasmonic metamaterials with tunable chirality. ACS Appl. Mater. Interfaces 12, 50192–50202 (2020).
Yan, J. et al. Self-assembly of chiral nanoparticles into semiconductor helices with tunable near-infrared optical activity. Chem. Mater. 32, 476–488 (2020).
Lu, J., Xue, Y. & Kotov, N. A. Emerging trends in chiral inorganic nanostructures. Isr. J. Chem. 61, 851–862 (2021).
Lv, J. W. et al. Self-assembled inorganic chiral superstructures. Nat. Rev. Chem. 6, 125–145 (2022).
Zheng, G. C. et al. Discrete metal nanoparticles with plasmonic chirality. Chem. Soc. Rev. 50, 3738–3754 (2021).
Lee, H. E. et al. Amino-acid- and peptide-directed synthesis of chiral plasmonic gold nanoparticles. Nature 556, 360–365 (2018).
Jiang, W. F. et al. Emergence of complexity in hierarchically organized chiral particles. Science 368, 642–648 (2020).
Jiang, W. G. et al. Homochirality in biomineral suprastructures induced by assembly of single-enantiomer amino acids from a nonracemic mixture. Nat. Commun. 10, 2318 (2019).
Jiang, W. G. et al. Chiral switching in biomineral suprastructures induced by homochiral L-amino acid. Sci. Adv. 4, eaas9819 (2018).
González-Rubio, G. et al. Micelle-directed chiral seeded growth on anisotropic gold nanocrystals. Science 368, 1472–1477 (2020).
Lan, X. et al. Au nanorod helical superstructures with designed chirality. J. Am. Chem. Soc. 137, 457–462 (2015).
Kuzyk, A. et al. DNA-based self-assembly of chiral plasmonic nanostructures with tailored optical response. Nature 483, 311–314 (2012).
Zhu, J. J. et al. Strong light-matter interactions in chiral plasmonic-excitonic systems assembled on DNA origami. Nano Lett. 21, 3573–3580 (2021).
Kuzyk, A. et al. Reconfigurable 3D plasmonic metamolecules. Nat. Mater. 13, 862–866 (2014).
Merg, A. D. et al. Peptide-directed assembly of single-helical gold nanoparticle superstructures exhibiting intense chiroptical activity. J. Am. Chem. Soc. 138, 13655–13663 (2016).
Zhang, Q. F. et al. Unraveling the origin of chirality from plasmonic nanoparticle-protein complexes. Science 365, 1475–1478 (2019).
He, Y. R. et al. Circularly polarized luminescent self-organized helical superstructures: from materials and stimulus-responsiveness to applications. Aggregate 2, e141 (2021).
Gonçalves, D. P. N. et al. Recent progress at the interface between nanomaterial chirality and liquid crystals. Liq. Cryst. Rev. 9, 1–34 (2021).
Cheng, G. Q. et al. Chiral self-assembly of nanoparticles induced by polymers synthesized via reversible addition-fragmentation chain transfer polymerization. ACS Nano 13, 1479–1489 (2019).
Lu, X. M. et al. Chiral arrangements of Au nanoparticles with prescribed handedness templated by helical pores in block copolymer films. Macromolecules 50, 5293–5300 (2017).
Chiu, P. T. et al. Gold nanohelices for chiral plasmonic films by templated electroless plating. Adv. Optical Mater. 9, 2002133 (2021).
Huo, S. W. et al. Self-assembled luminescent quantum dots to generate full-color and white circularly polarized light. Angew. Chem. Int. Ed. 56, 12174–12178 (2017).
Li, A. Z. et al. Chirality transfer in carbon dot-composited sol-gel systems for excitation-dependent circularly polarized luminescence. Langmuir 36, 8965–8970 (2020).
Shi, Y. H. et al. Endowing perovskite nanocrystals with circularly polarized luminescence. Adv. Mater. 30, 1705011 (2018).
Jin, X. et al. Optically active upconverting nanoparticles with induced circularly polarized luminescence and enantioselectively triggered photopolymerization. ACS Nano 13, 2804–2811 (2019).
Jung, S. H. et al. Chiral arrangement of achiral Au nanoparticles by supramolecular assembly of helical nanofiber templates. J. Am. Chem. Soc. 136, 6446–6452 (2014).
Li, Y. W. et al. Chiral transition metal oxides: synthesis, chiral origins, and perspectives. Adv. Mater. 32, 1905585 (2020).
Albano, G., Pescitelli, G. & Di Bari, L. Chiroptical properties in thin films of π-conjugated systems. Chem. Rev. 120, 10145–10243 (2020).
Maniappan, S., Jadhav, A. B. & Kumar, J. Template assisted generation of chiral luminescence in organic fluorophores. Front. Chem. 8, 557650 (2021).
Lee, S. et al. Controlled assembly of plasmonic nanoparticles: from static to dynamic nanostructures. Adv. Mater. 33, 2007668 (2021).
Goerlitzer, E. S. A. et al. The beginner’s guide to chiral plasmonics: mostly harmless theory and the design of large-area substrates. Adv. Optical Mater. 9, 2100378 (2021).
Luo, Y. et al. Plasmonic chiral nanostructures: chiroptical effects and applications. Adv. Optical Mater. 5, 1700040 (2017).
Vila-Liarte, D., Kotov, N. A. & Liz-Marzán, L. M. Template-assisted self-assembly of achiral plasmonic nanoparticles into chiral structures. Chem. Sci. 13, 595–610 (2022).
Wu, W. B. & Pauly, M. Chiral plasmonic nanostructures: recent advances in their synthesis and applications. Mater. Adv. 3, 186–215 (2022).
Hentschel, M. et al. Chiral plasmonics. Sci. Adv. 3, e1602735 (2017).
Urban, M. J. et al. Chiral plasmonic nanostructures enabled by bottom-up approaches. Annu. Rev. Phys. Chem. 70, 275–299 (2019).
Matuschek, M. et al. Chiral plasmonic hydrogen sensors. Small 14, 1702990 (2018).
Lee, Y. Y. et al. Plasmonic metamaterials for chiral sensing applications. Nanoscale 12, 58–66 (2020).
Zhao, Y. et al. Chirality detection of enantiomers using twisted optical metamaterials. Nat. Commun. 8, 14180 (2017).
Rodier, M. et al. Biomacromolecular charge chirality detected using chiral plasmonic nanostructures. Nanoscale Horiz. 5, 336–344 (2020).
Li, W. et al. Circularly polarized light detection with hot electrons in chiral plasmonic metamaterials. Nat. Commun. 6, 8379 (2015).
Liu, Z. X. et al. Enantiomeric discrimination by surface-enhanced Raman scattering-chiral anisotropy of chiral nanostructured gold films. Angew. Chem. Int. Ed. 59, 15226–15231 (2020).
Zhang, Y. J. et al. Plasmonic core–shell nanomaterials and their applications in spectroscopies. Adv. Mater. 33, 2005900 (2021).
Wen, D. D. et al. Helicity multiplexed broadband metasurface holograms. Nat. Commun. 6, 8241 (2015).
Zheng, G. X. et al. Metasurface holograms reaching 80% efficiency. Nat. Nanotechnol. 10, 308–312 (2015).
Jiang, S. & Kotov, N. A. Circular polarized light emission in chiral inorganic nanomaterials. Adv. Mater. https://doi.org/10.1002/adma.202108431 (2022).
Han, D. X. et al. Endowing inorganic nanomaterials with circularly polarized luminescence. Aggregate 3, e148 (2022).
Yang, X. F. et al. Circularly polarized luminescence in chiral nematic liquid crystals: generation and amplification. Mater. Chem. Front. 5, 4821–4832 (2021).
Chen, W. J. et al. Circularly polarized luminescence of nanoassemblies via multi-dimensional chiral architecture control. Nanoscale 12, 19497–19515 (2020).
Gong, Z. L. et al. Frontiers in circularly polarized luminescence: molecular design, self-assembly, nanomaterials, and applications. Sci. China Chem. 64, 2060–2104 (2021).
Stachelek, P. et al. Circularly polarised luminescence laser scanning confocal microscopy to study live cell chiral molecular interactions. Nat. Commun. 13, 553 (2022).
Zhan, X. Q. et al. 3D laser displays based on circularly polarized lasing from cholesteric liquid crystal arrays. Adv. Mater. 33, 2104418 (2021).
Kim, Y. H. et al. Chiral-induced spin selectivity enables a room-temperature spin light-emitting diode. Science 371, 1129–1133 (2021).
Al-Bustami, H. et al. Optical multilevel spin bit device using chiral quantum dots. Nano Lett. 20, 8675–8681 (2020).
Han, D. X. et al. Sequentially amplified circularly polarized ultraviolet luminescence for enantioselective photopolymerization. Nat. Commun. 11, 5659 (2020).
MacKenzie, L. E. & Pal, R. Circularly polarized lanthanide luminescence for advanced security inks. Nat. Rev. Chem. 5, 109–124 (2021).
Xu, M. C. et al. Assembling semiconductor quantum dots in hierarchical photonic cellulose nanocrystal films: circularly polarized luminescent nanomaterials as optical coding labels. J. Mater. Chem. C. 7, 13794–13802 (2019).
Lan, R. C. et al. Near-infrared photodriven self-sustained oscillation of liquid-crystalline network film with predesignated polydopamine coating. Adv. Mater. 32, 1906319 (2020).
Zhang, L. L. et al. Dynamic orthogonal switching of a thermoresponsive self-organized helical superstructure. Adv. Mater. 29, 1700676 (2017).
Gutierrez-Cuevas, K. G. et al. Frequency-driven self-organized helical superstructures loaded with mesogen-grafted silica nanoparticles. Angew. Chem. Int. Ed. 55, 13090–13094 (2016).
Wang, L. & Li, Q. Photochromism into nanosystems: towards lighting up the future nanoworld. Chem. Soc. Rev. 47, 1044–1097 (2018).
Bisoyi, H. K. & Li, Q. Light-directed dynamic chirality inversion in functional self-organized helical superstructures. Angew. Chem. Int. Ed. 55, 2994–3010 (2016).
Bisoyi, H. K. & Li, Q. Light-driven liquid crystalline materials: from photo-induced phase transitions and property modulations to applications. Chem. Rev. 116, 15089–15166 (2016).
Yang, X. et al. Bioinspired light-fueled water-walking soft robots based on liquid crystal network actuators with polymerizable miniaturized gold nanorods. Nano Today 43, 101419 (2022).
Yang, M. Y. et al. Bioinspired phototropic MXene-reinforced soft tubular actuators for omnidirectional light-tracking and adaptive photovoltaics. Adv. Funct. Mater. 32, 2201884 (2022).
Ma, J. Z. et al. Mechanochromic, shape-programmable and self-healable cholesteric liquid crystal elastomers enabled by dynamic covalent boronic ester bonds. Angew. Chem. Int. Ed. 61, e202116219 (2022).
Lv, P. F. et al. Stimulus-driven liquid metal and liquid crystal network actuators for programmable soft robotics. Mater. Horiz. 8, 2475–2484 (2021).
Uchida, J. et al. Advanced functional liquid crystals. Adv. Mater. 34, 2109063 (2022).
Bisoyi, H. K. & Li, Q. “Liquid crystals” in Kirk–Othmer Encyclopedia of Chemical Technology. (John Wiley & Sons, 2014).
Lugger, S. J. D. et al. Hydrogen-bonded supramolecular liquid crystal polymers: smart materials with stimuli-responsive, self-healing, and recyclable properties. Chem. Rev. 122, 4946–4975 (2022).
Sol, J. A. H. P. et al. Anisotropic iridescence and polarization patterns in a direct ink written chiral photonic polymer. Adv. Mater. 33, 2103309 (2021).
Li, Q. Intelligent Stimuli-Responsive Materials: From Well-Defined Nanostructures to Applications. (John Wiley & Sons, 2013).
Wang, L. & Li, Q. Light-driven self-organized liquid crystalline nanostructures enabled by chiral molecular switches or motors: from 1D to 3D photonic crystals. in Photoactive Functional Soft Materials: Preparation, Properties, and Applications (ed Li, Q.) 91–123 (John Wiley & Sons, 2018).
Sharma, V. et al. Structural origin of circularly polarized iridescence in jeweled beetles. Science 325, 449–451 (2009).
Vignolini, S. et al. Pointillist structural color in Pollia fruit. Proc. Natl Acad. Sci. U.S.A. 109, 15712–15715 (2012).
Sweeney, A., Jiggins, C. & Johnsen, S. Polarized light as a butterfly mating signal. Nature 423, 31–32 (2003).
Weaver, J. C. et al. The stomatopod dactyl club: a formidable damage-tolerant biological hammer. Science 336, 1275–1280 (2012).
Mitov, M. et al. Long-range structuring of nanoparticles by mimicry of a cholesteric liquid crystal. Nat. Mater. 1, 229–231 (2002).
Yang, Y. Z. et al. 3D chiral photonic nanostructures based on blue-phase liquid crystals. Small Sci. 1, 2100007 (2021).
Wang, L. et al. Stimuli-directed self-organized chiral superstructures for adaptive windows enabled by mesogen-functionalized graphene. Mater. Today 20, 230–237 (2017).
Zheng, Z. G. et al. Three-dimensional control of the helical axis of a chiral nematic liquid crystal by light. Nature 531, 352–356 (2016).
Wang, L. & Li, Q. Stimuli-directing self-organized 3D liquid-crystalline nanostructures: from materials design to photonic applications. Adv. Funct. Mater. 26, 10–28 (2016).
Wang, L. et al. Hysteresis-free blue phase liquid-crystal-stabilized by ZnS nanoparticles. Small 8, 2189–2193 (2012).
Li, Q. Anisotropic Nanomaterials: Preparation, Properties, and Applications. (Springer, 2015).
Wang, M. et al. Asymmetric tunable photonic bandgaps in self-organized 3D nanostructure of polymer-stabilized blue phase I modulated by voltage polarity. Adv. Funct. Mater. 27, 1702261 (2017).
Hu, W. et al. Ultrastable liquid crystalline blue phase from molecular synergistic self-assembly. Nat. Commun. 12, 1440 (2021).
Yang, Y. Z. et al. Bioinspired color-changing photonic polymer coatings based on three-dimensional blue phase liquid crystal networks. ACS Appl. Mater. Interfaces 13, 41102–41111 (2021).
Li, Q. Liquid Crystals Beyond Displays: Chemistry, Physics, and Applications. (John Wiley & Sons, 2012).
Li, Q. Functional Organic and Hybrid Nanostructured Materials: Fabrication, Properties, and Applications. (John Wiley & Sons, 2018).
Wang, L. & Li, Q. Photochromic organic and hybrid self-organized nanostructured materials: from design to applications. in Functional Organic and Hybrid Nanostructured Materials: Fabrication, Properties, and Applications, (ed Li, Q.) 75–112 (John Wiley & Sons, 2018).
Wang, L. & Li, Q. Stimuli-responsive self-organized liquid crystalline nanostructures: from 1D to 3D photonic crystals. in Organic and Hybrid Photonic Crystals. 393–430 (ed Comoretto, D.) (pringer, 2015).
Wang, L., Gutierrez-Cuevas, K. G. & Li, Q. Photochromic chiral liquid crystals for light sensing. in Liquid Crystal Sensors. (eds Schenning, A. P. H. J., Crawford, G. P., & Broer, D. J.) 33–62 (CRC Press, 2017).
Li, Q. Photoactive Functional Soft Materials: Preparation, Properties, and Applications. (John Wiley & Sons, 2018).
Nizar, N. S. S. et al. Emergent chiroptical properties in supramolecular and plasmonic assemblies. Chem. Soc. Rev. 50, 11208–11226 (2021).
Collins, J. T. et al. Chirality and chiroptical effects in metal nanostructures: fundamentals and current trends. Adv. Optical Mater. 5, 1700182 (2017).
Mun, J. et al. Electromagnetic chirality: from fundamentals to nontraditional chiroptical phenomena. Light.: Sci. Appl. 9, 139 (2020).
Chen, Y. et al. Multidimensional nanoscopic chiroptics. Nat. Rev. Phys. 4, 113–124 (2022).
Xu, L. G. et al. Enantiomer-dependent immunological response to chiral nanoparticles. Nature 601, 366–373 (2022).
Stutzman, W. L. Polarization in Electromagnetic Systems. 2nd edn. (Artech House, 2018).
Sang, Y. T. et al. Circularly polarized luminescence in nanoassemblies: generation, amplification, and application. Adv. Mater. 32, 1900110 (2020).
Zhang, C. et al. Circularly polarized luminescence of agglomerate emitters. Aggregate 2, e48 (2021).
Lin, P. C. et al. Techniques for physicochemical characterization of nanomaterials. Biotechnol. Adv. 32, 711–726 (2014).
Craig, M. R. et al. The chiroptical properties of a thermally annealed film of chiral substituted polyfluorene depend on film thickness. Adv. Mater. 15, 1435–1438 (2003).
Schulz, M. et al. Giant intrinsic circular dichroism of prolinol-derived squaraine thin films. Nat. Commun. 9, 2413 (2018).
Goto, H. Cholesteric liquid crystal inductive asymmetric polymerization: synthesis of chiral polythiophene derivatives from achiral monomers in a cholesteric liquid crystal. Macromolecules 40, 1377–1385 (2007).
Lu, J. et al. Enhanced optical asymmetry in supramolecular chiroplasmonic assemblies with long-range order. Science 371, 1368–1374 (2021).
San Jose, B. A., Yan, J. L. & Akagi, K. Dynamic switching of the circularly polarized luminescence of disubstituted polyacetylene by selective transmission through a thermotropic chiral nematic liquid crystal. Angew. Chem. Int. Ed. 53, 10641–10644 (2014).
Shi, H. Q. et al. Circularly polarized fluorescence from chiral nematic liquid crystalline films: theory and experiment. Liq. Cryst. 24, 163–172 (1998).
Chen, S. H. et al. Circularly polarized light generated by photoexcitation of luminophores in glassy liquid-crystal films. Nature 397, 506–508 (1999).
Li, C. X. et al. Signal transmission encryption based on dye-doped chiral liquid crystals via tunable and efficient circularly polarized luminescence. Mater. Adv. 2, 3851–3855 (2021).
Baral, M. et al. Conjunctive photoluminescence enhancement through plasmonic and photonic band-gap pathways in a chiral self-assembled system. ChemPhotoChem 4, 582–591 (2020).
Xiong, R. et al. Biopolymeric photonic structures: design, fabrication, and emerging applications. Chem. Soc. Rev. 49, 983–1031 (2020).
Wu, T. H. et al. A bio-inspired cellulose nanocrystal-based nanocomposite photonic film with hyper-reflection and humidity-responsive actuator properties. J. Mater. Chem. C. 4, 9687–9696 (2016).
Fernandes, S. N. et al. Mind the microgap in iridescent cellulose nanocrystal films. Adv. Mater. 29, 1603560 (2017).
Matranga, A. et al. Biomimetic reflectors fabricated using self-organising, self-aligning liquid crystal polymers. Adv. Mater. 25, 520–523 (2013).
Mitov, M. & Dessaud, N. Going beyond the reflectance limit of cholesteric liquid crystals. Nat. Mater. 5, 361–364 (2006).
Guo, J. B. et al. Effect of network concentration on the performance of polymer-stabilized cholesteric liquid crystals with a double-handed circularly polarized light reflection band. J. Phys. Chem. C. 113, 16538–16543 (2009).
Guo, J. B. et al. Polymer stabilized liquid crystal films reflecting both right- and left-circularly polarized light. Appl. Phys. Lett. 93, 201901 (2008).
Jakšić, Z. et al. Negative refractive index metasurfaces for enhanced biosensing. Materials 4, 1–36 (2011).
Mejía-Salazar, J. R. & Oliveira, O. N. Jr. Plasmonic biosensing: focus review. Chem. Rev. 118, 10617–10625 (2018).
Wang, M. J. et al. Plasmonic helical nanoantenna as a converter between longitudinal fields and circularly polarized waves. Nano Lett. 21, 3410–3417 (2021).
Wei, X. Q. et al. Enantioselective photoinduced cyclodimerization of a prochiral anthracene derivative adsorbed on helical metal nanostructures. Nat. Chem. 12, 551–559 (2020).
Xue, C. M. & Li, Q. “Gold nanorods” in Encyclopedia of Surface and Colloid Science. 3th edn. (ed. Somasundaran, P.) (CRC Press, 2015).
Xue, C. M. & Li, Q. Anisotropic gold nanoparticles: preparation, properties, and applications. in Anisotropic Nanomaterials: Preparation, Properties, and Applications. 69–118 (ed Li, Q.) (Springer, 2015).
Bisoyi, H. K. & Li, Q. Liquid crystalline anisotropic nanoparticles: from metallic and semiconducting nanoparticles to carbon nanomaterials. in Anisotropic Nanomaterials: Preparation, Properties, and Applications (ed Li, Q.) 209–240 (Springer, 2015).
Xue, C. M. & Li, Q. Liquid crystal-gold nanoparticle hybrid materials. in Nanoscience with Liquid Crystals: From Self-Organized Nanostructures to Applications (ed Li, Q.) 101–134 (Springer, 2014).
Xue, C. M. & Li, Q. Stimuli-responsive smart organic hybrid metal nanoparticles. in Intelligent Stimuli-Responsive Materials: From Well-Defined Nanostructures to Applications (ed Li, Q.) (John Wiley & Sons, 2013).
Gansel, J. K. et al. Gold helix photonic metamaterial as broadband circular polarizer. Science 325, 1513–1515 (2009).
Esposito, M. et al. Triple-helical nanowires by tomographic rotatory growth for chiral photonics. Nat. Commun. 6, 6484 (2015).
Liu, Z. G. et al. Nano-kirigami with giant optical chirality. Sci. Adv. 4, eaat4436 (2018).
Rajaei, M. et al. Giant circular dichroism at visible frequencies enabled by plasmonic ramp-shaped nanostructures. ACS Photon. 6, 924–931 (2019).
Burkett, S. L. & Mann, S. Spatial organization and patterning of gold nanoparticles on self-assembled biolipid tubular templates. Chem. Commun. 3, 321–322 (1996).
Sharma, J. et al. Control of self-assembly of DNA tubules through integration of gold nanoparticles. Science 323, 112–116 (2009).
Chen, C. L., Zhang, P. J. & Rosi, N. L. A new peptide-based method for the design and synthesis of nanoparticle superstructures: construction of highly ordered gold nanoparticle double helices. J. Am. Chem. Soc. 130, 13555–13557 (2008).
Mokashi-Punekar, S., Merg, A. D. & Rosi, N. L. Systematic adjustment of pitch and particle dimensions within a family of chiral plasmonic gold nanoparticle single helices. J. Am. Chem. Soc. 139, 15043–15048 (2017).
Song, C. Y. et al. Tailorable plasmonic circular dichroism properties of helical nanoparticle superstructures. Nano Lett. 13, 3256–3261 (2013).
Zhang, M. J. et al. Amplifying inorganic chirality using liquid crystals. Nanoscale 14, 592–601 (2022).
Gutierrez-Cuevas, K. G. et al. Near infrared light-driven liquid crystal phase transition enabled by hydrophobic mesogen grafted plasmonic gold nanorods. Chem. Commun. 51, 9845–9848 (2015).
Wang, L. et al. Near-infrared light-directed handedness inversion in plasmonic nanorod-embedded helical superstructure. Adv. Optical Mater. 4, 247–251 (2016).
Wang, L. et al. NIR light-directing self-organized 3D photonic superstructures loaded with anisotropic plasmonic hybrid nanorods. Chem. Commun. 51, 15039–15042 (2015).
Li, Q. Nanoscience with Liquid Crystals: From Self-Organized Nanostructures to Applications. (Springer, 2014).
Bisoyi, H. K. & Li, Q. Liquid crystals: versatile self-organized smart soft materials. Chem. Rev. 122, 4887–4926 (2022).
Wang, L. et al. Bowlics: history, advances and applications. Liq. Cryst. Today 26, 85–111 (2017).
Bisoyi, H. K. & Li, Q. Stimuli directed alignment of self-organized one-dimensional semiconducting columnar liquid crystal nanostructures for organic electronics. Prog. Mater. Sci. 104, 1–52 (2019).
Dierking, I. Chiral liquid crystals: structures, phases, effects. Symmetry 6, 444–472 (2014).
Liu, J. et al. Diffusionless transformation of soft cubic superstructure from amorphous to simple cubic and body-centered cubic phases. Nat. Commun. 12, 3477 (2021).
Mitov, M., Bourgerette, C. & De Guerville, F. Fingerprint patterning of solid nanoparticles embedded in a cholesteric liquid crystal. J. Phys. Condens. Matter 16, S1981–S1988 (2004).
Dintinger, J. et al. A self-organized anisotropic liquid-crystal plasmonic metamaterial. Adv. Mater. 25, 1999–2004 (2013).
Zeng, X. B. et al. 3D ordered gold strings by coating nanoparticles with mesogens. Adv. Mater. 21, 1746–1750 (2009).
Mokashi-Punekar, S. et al. Construction of chiral, helical nanoparticle superstructures: progress and prospects. Adv. Mater. 32, 1905975 (2020).
Wang, L. Self-activating liquid crystal devices for smart laser protection. Liq. Cryst. 43, 2062–2078 (2016).
Atorf, B. et al. Liquid crystals and precious metal: from nanoparticle dispersions to functional plasmonic nanostructures. Liq. Cryst. 44, 1929–1947 (2017).
Yu, H. N. et al. Chirality enhancement in macro-chiral liquid crystal nanoparticles. Mater. Horiz. 7, 3021–3027 (2020).
Bitar, R., Agez, G. & Mitov, M. Cholesteric liquid crystal self-organization of gold nanoparticles. Soft Matter 7, 8198–8206 (2011).
Bagiński, M. et al. Dynamic self-assembly of nanoparticles using thermotropic liquid crystals. Liq. Cryst. 43, 2391–2409 (2016).
Cseh, L. et al. Helically twisted chiral arrays of gold nanoparticles coated with a cholesterol mesogen. J. Am. Chem. Soc. 137, 12736–12739 (2015).
Yu, H. N. et al. Two helices from one chiral centre-self organization of disc shaped chiral nanoparticles. Chem. Sci. 12, 1778–1782 (2021).
Bhat, S. A. et al. Chiral plasmonic liquid crystal gold nanoparticles: self-assembly into a circular dichroism responsive helical lamellar superstructure. Nanoscale Adv. 3, 2269–2279 (2021).
Bhardwaj, A. et al. Photo-tunable epsilon-near-zero behavior in a self-assembled liquid crystal – nanoparticle hybrid material. Nanoscale Adv. 3, 2508–2515 (2021).
Xia, Q. et al. Direct visualization of chiral amplification of chiral aggregation induced emission molecules in nematic liquid crystals. ACS Nano 15, 4956–4966 (2021).
Meng, D. J. et al. Constructing chiral gold nanorod oligomers using a spatially separated sergeants-and-soldiers effect. Nanoscale 13, 9678–9685 (2021).
Prins, L. J., Timmerman, P. & Reinhoudt, D. N. Amplification of chirality: the “sergeants and soldiers” principle applied to dynamic hydrogen-bonded assemblies. J. Am. Chem. Soc. 123, 10153–10163 (2001).
Wang, R. Y. et al. Experimental observation of giant chiroptical amplification of small chiral molecules by gold nanosphere clusters. J. Phys. Chem. C. 118, 9690–9695 (2014).
Maoz, B. M. et al. Amplification of chiroptical activity of chiral biomolecules by surface plasmons. Nano Lett. 13, 1203–1209 (2013).
Fu, K. et al. Amplifying the excited state chirality through self-assembly and subsequent enhancement via plasmonic silver nanowires. Nanoscale 12, 19760–19767 (2020).
Pour, S. O. et al. Through-space transfer of chiral information mediated by a plasmonic nanomaterial. Nat. Chem. 7, 591–596 (2015).
Guerrero-Martínez, A. et al. From individual to collective chirality in metal nanoparticles. Nano Today 6, 381–400 (2011).
Guerrero-Martinez, A. et al. Intense optical activity from three-dimensional chiral ordering of plasmonic nanoantennas. Angew. Chem. Int. Ed. 50, 5499–5503 (2011).
Perera, K. et al. Converging microlens array using nematic liquid crystals doped with chiral nanoparticles. ACS Appl. Mater. Interfaces 13, 4574–4582 (2021).
Le, K. V., Takezoe, H. & Araoka, F. Chiral superstructure mesophases of achiral bent-shaped molecules-hierarchical chirality amplification and physical properties. Adv. Mater. 29, 1602737 (2017).
Hough, L. E. et al. Chiral isotropic liquids from achiral molecules. Science 325, 452–456 (2009).
Tschierske, C. Development of structural complexity by liquid-crystal self-assembly. Angew. Chem. Int. Ed. 52, 8828–8878 (2013).
Lewandowski, W. et al. Dynamically self-assembled silver nanoparticles as a thermally tunable metamaterial. Nat. Commun. 6, 6590 (2015).
Lewandowski, W., Wójcik, M. & Górecka, E. Metal nanoparticles with liquid-crystalline ligands: controlling nanoparticle superlattice structure and properties. ChemPhysChem 15, 1283–1295 (2014).
Wojcik, M. et al. Liquid-crystalline phases made of gold nanoparticles. Angew. Chem. Int. Ed. 48, 5167–5169 (2009).
Takezoe, H. & Eremin, A. Bent-Shaped Liquid Crystals: Structures and Physical Properties. (CRC Press, 2017).
Bagiński, M. et al. Shaping liquid crystals with gold nanoparticles: helical assemblies with tunable and hierarchical structures via thin-film cooperative interactions. Adv. Mater. 32, 1904581 (2020).
Szustakiewicz, P. et al. Supramolecular chirality synchronization in thin films of plasmonic nanocomposites. ACS Nano 14, 12918–12928 (2020).
Grzelak, D. et al. Liquid crystal templated chiral plasmonic films with dynamic tunability and moldability. Adv. Funct. Mater. 32, 2111280 (2022).
Dierking, I. & Neto, A. M. F. Novel trends in lyotropic liquid crystals. Crystals 10, 604 (2020).
Mezzenga, R. et al. Nature-inspired design and application of lipidic lyotropic liquid crystals. Adv. Mater. 31, 1900818 (2019).
Zeng, M. X. et al. Iridescence in nematics: photonic liquid crystals of nanoplates in absence of long-range periodicity. Proc. Natl Acad. Sci. U.S.A. 116, 18322–18327 (2019).
Saadat, Y. et al. Lyotropic liquid crystals as templates for advanced materials. J. Mater. Chem. A 9, 21607–21658 (2021).
Shinde, A. et al. Growth of colloidal nanoplate liquid crystals using temperature gradients. ACS Nano 13, 12461–12469 (2019).
Chen, M. F. et al. Rainbows in a vial: controlled assembly of 2D colloids in two perpendicular external fields. 2D Mater. 6, 025031 (2019).
Lv, P. F. et al. Nanocellulose-based functional materials: from chiral photonics to soft actuator and energy storage. Adv. Funct. Mater. 31, 2104991 (2021).
Chakraborty, A. et al. Near-infrared chiral plasmonic microwires through precision assembly of gold nanorods on soft biotemplates. J. Phys. Chem. C. 125, 3256–3267 (2021).
Wang, R. Y. et al. Chiral assembly of gold nanorods with collective plasmonic circular dichroism response. Soft Matter 7, 8370–8375 (2011).
Dierking, I. & Al-Zangana, S. Lyotropic liquid crystal phases from anisotropic nanomaterials. Nanomaterials 7, 305 (2017).
Mitov, M. Cholesteric liquid crystals in living matter. Soft Matter 13, 4176–4209 (2017).
Ureña-Benavides, E. E. et al. Rheology and phase behavior of lyotropic cellulose nanocrystal suspensions. Macromolecules 44, 8990–8998 (2011).
Meseck, G. R., Terpstra, A. S. & MacLachlan, M. J. Liquid crystal templating of nanomaterials with nature’s toolbox. Curr. Opin. Colloid Interface Sci. 29, 9–20 (2017).
Shopsowitz, K. E. et al. Free-standing mesoporous silica films with tunable chiral nematic structures. Nature 468, 422–425 (2010).
Kelly, J. A. et al. The development of chiral nematic mesoporous materials. Acc. Chem. Res. 47, 1088–1096 (2014).
Querejeta-Fernández, A. et al. Chiral plasmonic films formed by gold nanorods and cellulose nanocrystals. J. Am. Chem. Soc. 136, 4788–4793 (2014).
Querejeta-Fernández, A. et al. Circular dichroism of chiral nematic films of cellulose nanocrystals loaded with plasmonic nanoparticles. ACS Nano 9, 10377–10385 (2015).
Lukach, A. et al. Coassembly of gold nanoparticles and cellulose nanocrystals in composite films. Langmuir 31, 5033–5041 (2015).
Chu, G. et al. Free-standing optically switchable chiral plasmonic photonic crystal based on self-assembled cellulose nanorods and gold nanoparticles. ACS Appl. Mater. Interfaces 7, 21797–21806 (2015).
Liu, Q. K. et al. Orientationally ordered colloidal co-dispersions of gold nanorods and cellulose nanocrystals. Adv. Mater. 26, 7178–7184 (2014).
Campbell, M. G. et al. Preparation of nanocomposite plasmonic films made from cellulose nanocrystals or mesoporous silica decorated with unidirectionally aligned gold nanorods. Materials 7, 3021–3033 (2014).
Chu, G. et al. Optically tunable chiral plasmonic guest–host cellulose films weaved with long-range ordered silver nanowires. ACS Appl. Mater. Interfaces 7, 11863–11870 (2015).
Feng, K. et al. Improving homogeneity of iridescent cellulose nanocrystal films by surfactant-assisted spreading self-assembly. ACS Sustain. Chem. Eng. 7, 19062–19071 (2019).
Majoinen, J. et al. Chiral plasmonics using twisting along cellulose nanocrystals as a template for gold nanoparticles. Adv. Mater. 28, 5262–5267 (2016).
Schlesinger, M. et al. Chiral nematic cellulose-gold nanoparticle composites from mesoporous photonic cellulose. Chem. Commun. 51, 530–533 (2015).
Qi, H. et al. Chiral nematic assemblies of silver nanoparticles in mesoporous silica thin films. J. Am. Chem. Soc. 133, 3728–3731 (2011).
Kelly, J. A. et al. Chiral nematic stained glass: controlling the optical properties of nanocrystalline cellulose-templated materials. Langmuir 28, 17256–17262 (2012).
Fitzpatrick, A. W. P. et al. Atomic structure and hierarchical assembly of a cross-β amyloid fibril. Proc. Natl Acad. Sci. U.S.A. 110, 5468–5473 (2013).
Park, S. M. et al. Hierarchically fabricated amyloid fibers via evaporation-induced self-assembly. ACS Nano 15, 20261–20266 (2021).
Jung, J. M. & Mezzenga, R. Liquid crystalline phase behavior of protein fibers in water: experiments versus theory. Langmuir 26, 504–514 (2010).
Nyström, G., Arcari, M. & Mezzenga, R. Confinement-induced liquid crystalline transitions in amyloid fibril cholesteric tactoids. Nat. Nanotechnol. 13, 330–336 (2018).
Kumar, J. et al. Detection of amyloid fibrils in Parkinson’s disease using plasmonic chirality. Proc. Natl Acad. Sci. U.S.A. 115, 3225–3230 (2018).
Deng, Y. J. et al. Circularly polarized luminescence from organic micro-/nano-structures. Light. Sci. Appl. 10, 76 (2021).
Han, Y. X. et al. Chiral fluorescent silicon nanoparticles for aminopropanol enantiomer: fluorescence discrimination and mechanism identification. Anal. Chem. 92, 3949–3957 (2020).
Chen, X. M. et al. Tunable circularly polarized luminescent supramolecular systems: approaches and applications. ChemPhotoChem 6, e202100256 (2022).
Hao, J. J. et al. Optically active CdSe/CdS nanoplatelets exhibiting both circular dichroism and circularly polarized luminescence. Adv. Optical Mater. 9, 2101142 (2021).
Kuznetsova, V. et al. Ligand-induced chirality and optical activity in semiconductor nanocrystals: theory and applications. Nanophotonics 10, 797–824 (2021).
Shao, X. et al. Impact of native achiral ligands on the chirality of enantiopure cysteine stabilized CdSe nanocrystals. J. Mater. Chem. C. 9, 555–561 (2021).
Li, C. X. et al. Optically active quantum dots with induced circularly polarized luminescence in amphiphilic peptide dendron hydrogel. Nanoscale Adv. 1, 508–512 (2019).
Yang, L. et al. Chiral helical supramolecular hydrogels with adjustable pitch and diameter towards high-performance chiroptical detecting. Giant 8, 100077 (2021).
Song, F. Y. et al. Tunable circularly polarized luminescence from molecular assemblies of chiral AIEgens. Mater. Chem. Front. 3, 1768–1778 (2019).
Shi, L. et al. Self-assembly of chiral gold clusters into crystalline nanocubes of exceptional optical activity. Angew. Chem. Int. Ed. 56, 15397–15401 (2017).
Li, Y. et al. The amplified circularly polarized luminescence regulated from D-A type AIE-active chiral emitters via liquid crystals system. Chem. Commun. 56, 1117–1120 (2020).
Yang, X. F. et al. Photon-upconverting chiral liquid crystal: significantly amplified upconverted circularly polarized luminescence. Chem. Sci. 10, 172–178 (2019).
Moloney, M. P. et al. Preparation of chiral quantum dots. Nat. Protoc. 10, 558–573 (2015).
Xu, Y. H. et al. Recent progress in two-dimensional inorganic quantum dots. Chem. Soc. Rev. 47, 586–625 (2018).
Brotchie, A. Graphene quantum dots: it’s all in the twist. Nat. Rev. Mater. 1, 16006 (2016).
Milton, F. P. et al. The chiral nano-world: chiroptically active quantum nanostructures. Nanoscale Horiz. 1, 14–26 (2016).
Tohgha, U. et al. Ligand induced circular dichroism and circularly polarized luminescence in CdSe quantum dots. ACS Nano 7, 11094–11102 (2013).
Suzuki, N. et al. Chiral graphene quantum dots. ACS Nano 10, 1744–1755 (2016).
Deka, M. J. & Chowdhury, D. Chiral carbon dots and their effect on the optical properties of photosensitizers. RSC Adv. 7, 53057–53063 (2017).
Li, F. et al. Chiral carbon dots mimicking topoisomerase I to mediate the topological rearrangement of supercoiled DNA enantioselectively. Angew. Chem. Int. Ed. 59, 11087–11092 (2020).
Li, F. et al. Highly fluorescent chiral N-S-doped carbon dots from cysteine: affecting cellular energy metabolism. Angew. Chem. Int. Ed. 57, 2377–2382 (2018).
Bobrovsky, A. et al. Optically and electrically controlled circularly polarized emission from cholesteric liquid crystal materials doped with semiconductor quantum dots. Adv. Mater. 24, 6216–6222 (2012).
Bobrovsky, A. et al. Glass-forming photoactive cholesteric oligomers doped with quantum dots: novel materials with phototunable circularly polarised emission. Liq. Cryst. 38, 737–742 (2011).
Kumar, R. & Raina, K. K. Optical and electrical control of circularly polarised fluorescence in CdSe quantum dots dispersed polymer stabilised cholesteric liquid crystal shutter. Liq. Cryst. 43, 994–1001 (2016).
Shi, Y. et al. Circularly polarized luminescence from semiconductor quantum rods templated by self-assembled cellulose nanocrystals. J. Mater. Chem. C. 8, 1048–1053 (2020).
Zheng, H. Z. et al. Uncovering the circular polarization potential of chiral photonic cellulose films for photonic applications. Adv. Mater. 30, 1705948 (2018).
Edgar, C. D. & Gray, D. G. Induced circular dichroism of chiral nematic cellulose films. Cellulose 8, 5–12 (2001).
Kang, S. et al. Dynamic chiro-optics of bio-inorganic nanomaterials via seamless co-assembly of semiconducting nanorods and polysaccharide nanocrystals. Adv. Funct. Mater. 31, 2104596 (2021).
Boott, C. E. et al. Cellulose nanocrystal elastomers with reversible visible color. Angew. Chem. Int. Ed. 59, 226–231 (2020).
Kose, O. et al. Unwinding a spiral of cellulose nanocrystals for stimuli-responsive stretchable optics. Nat. Commun. 10, 510 (2019).
Nguyen, T. D., Hamad, W. Y. & MacLachlan, M. J. CdS quantum dots encapsulated in chiral nematic mesoporous silica: new iridescent and luminescent materials. Adv. Funct. Mater. 24, 777–783 (2014).
Li, Z. Y. et al. Frontiers in carbon dots: design, properties and applications. Mater. Chem. Front. 3, 2571–2601 (2019).
Li, Z. H. et al. Carbon-based functional nanomaterials: preparation, properties and applications. Compos. Sci. Technol. 179, 10–40 (2019).
Döring, A., Ushakova, E. & Rogach, A. L. Chiral carbon dots: synthesis, optical properties, and emerging applications. Light. Sci. Appl. 11, 75 (2022).
Zheng, H. Z. et al. Circularly polarized luminescent carbon dot nanomaterials of helical superstructures for circularly polarized light detection. Adv. Optical Mater. 6, 1801246 (2018).
Xu, M. C. et al. Designing hybrid chiral photonic films with circularly polarized room-temperature phosphorescence. ACS Nano 14, 11130–11139 (2020).
Xiong, R. et al. Self-assembly of emissive nanocellulose/quantum dot nanostructures for chiral fluorescent materials. ACS Nano 13, 9074–9081 (2019).
Chekini, M. et al. Chiral carbon dots synthesized on cellulose nanocrystals. Adv. Optical Mater. 8, 1901911 (2020).
Long, G. K. et al. Chiral-perovskite optoelectronics. Nat. Rev. Mater. 5, 423–439 (2020).
Li, S. Q. et al. Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment. Nat. Commun. 11, 1192 (2020).
Ma, J. Q., Wang, H. Z. & Li, D. H. Recent progress of chiral perovskites: materials, synthesis, and properties. Adv. Mater. 33, 2008785 (2021).
Protesescu, L. et al. Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Lett. 15, 3692–3696 (2015).
Billing, D. G. & Lemmerer, A. Bis[(S)-β-phenethylammonium] tribromoplumbate (II). Acta Crystallogr. Sect. E 59, m381–m383 (2003).
Billing, D. G. & Lemmerer, A. Synthesis and crystal structures of inorganic–organic hybrids incorporating an aromatic amine with a chiral functional group. CrystEngComm 8, 686–695 (2006).
Ahn, J. et al. A new class of chiral semiconductors: chiral-organic-molecule-incorporating organic–inorganic hybrid perovskites. Mater. Horiz. 4, 851–856 (2017).
Chen, W. J. et al. Two-photon absorption-based upconverted circularly polarized luminescence generated in chiral perovskite nanocrystals. J. Phys. Chem. Lett. 10, 3290–3295 (2019).
Liu, P. Z. et al. Optically active perovskite CsPbBr3 nanocrystals helically arranged on inorganic silica nanohelices. Nano Lett. 20, 8453–8460 (2020).
Wang, C. T. et al. Fully chiral light emission from CsPbX3 perovskite nanocrystals enabled by cholesteric superstructure stacks. Adv. Funct. Mater. 29, 1903155 (2019).
Wei, Y., Cheng, Z. Y. & Lin, J. An overview on enhancing the stability of lead halide perovskite quantum dots and their applications in phosphor-converted LEDs. Chem. Soc. Rev. 48, 310–350 (2019).
Liang, S. et al. Recent advances in synthesis, properties, and applications of metal halide perovskite nanocrystals/polymer nanocomposites. Adv. Mater. 33, 2005888 (2021).
Bai, Y. et al. Surface chemistry engineering of perovskite quantum dots: strategies, applications, and perspectives. Adv. Mater. 34, 2105958 (2022).
Liu, S. J. et al. Circularly polarized perovskite luminescence with dissymmetry factor up to 1.9 by soft helix bilayer device. Matter https://doi.org/10.1016/j.matt.2022.05.012 (2022).
Chen, B. & Wang, F. Emerging frontiers of upconversion nanoparticles. Trends Chem. 2, 427–439 (2020).
Wen, S. H. et al. Advances in highly doped upconversion nanoparticles. Nat. Commun. 9, 2415 (2018).
Han, S. Y. et al. Enhancing luminescence in lanthanide-doped upconversion nanoparticles. Angew. Chem. Int. Ed. 53, 11702–11715 (2014).
Wu, S. & Butt, H. J. Near-infrared-sensitive materials based on upconverting nanoparticles. Adv. Mater. 28, 1208–1226 (2016).
Wang, Y. H. et al. Stimuli-responsive nanotheranostics based on lanthanide-doped upconversion nanoparticles for cancer imaging and therapy: current advances and future challenges. Nano Today 25, 38–67 (2019).
Chen, G. Y. et al. Upconversion nanoparticles: design, nanochemistry, and applications in theranostics. Chem. Rev. 114, 5161–5214 (2014).
Dong, H. et al. Lanthanide nanoparticles: from design toward bioimaging and therapy. Chem. Rev. 115, 10725–10815 (2015).
Zhang, Z., Chen, Y. M. & Zhang, Y. Self-assembly of upconversion nanoparticles based materials and their emerging applications. Small 18, 2103241 (2022).
De Camillis, S. et al. Controlling the non-linear emission of upconversion nanoparticles to enhance super-resolution imaging performance. Nanoscale 12, 20347–20355 (2020).
Haase, M. & Schäfer, H. Upconverting nanoparticles. Angew. Chem. Int. Ed. 50, 5808–5829 (2011).
Zhang, Y., Zhu, X. H. & Zhang, Y. Exploring heterostructured upconversion nanoparticles: from rational engineering to diverse applications. ACS Nano 15, 3709–3735 (2021).
Zhou, J. et al. Upconversion luminescent materials: advances and applications. Chem. Rev. 115, 395–465 (2015).
Levy, E. S. et al. Energy-looping nanoparticles: harnessing excited-state absorption for deep-tissue imaging. ACS Nano 10, 8423–8433 (2016).
Chen, H. et al. Multiplasmons-pumped excited-state absorption and energy transfer upconversion of rare-earth-doped luminescence beyond the diffraction limit. ACS Photon. 8, 1335–1343 (2021).
Li, X. M., Zhang, F. & Zhao, D. Y. Lab on upconversion nanoparticles: optical properties and applications engineering via designed nanostructure. Chem. Soc. Rev. 44, 1346–1378 (2015).
Cheng, X. W. et al. Energy transfer designing in lanthanide-doped upconversion nanoparticles. Chem. Commun. 56, 15118–15132 (2020).
Zhang, Z. et al. Upconversion superballs for programmable photoactivation of therapeutics. Nat. Commun. 10, 4586 (2019).
Wang, F. & Liu, X. G. Upconversion multicolor fine-tuning: visible to near-infrared emission from lanthanide-doped NaYF4 nanoparticles. J. Am. Chem. Soc. 130, 5642–5643 (2008).
Li, C. X. & Duan, P. F. Recent advances of circularly polarized luminescence in photon upconversion systems. Chem. Lett. 50, 546–552 (2021).
Mori, T. Circularly Polarized Luminescence of Isolated Small Organic Molecules. (Springer, 2020).
Zhou, M. H. et al. Steering nanohelix and upconverted circularly polarized luminescence by using completely achiral components. ACS Nano 15, 2753–2761 (2021).
Yang, D. et al. Photon upconverted circularly polarized luminescence via triplet–triplet annihilation. Adv. Mater. 31, 1805683 (2019).
Zhou, B. et al. Controlling upconversion nanocrystals for emerging applications. Nat. Nanotechnol. 10, 924–936 (2015).
Han, J. L. et al. Amplification of circularly polarized luminescence through triplet–triplet annihilation-based photon upconversion. J. Am. Chem. Soc. 139, 9783–9786 (2017).
Lin, T. A., Perkinson, C. F. & Baldo, M. A. Strategies for high-performance solid-state triplet-triplet-annihilation-based photon upconversion. Adv. Mater. 32, 1908175 (2020).
Zhao, T. H. et al. Amplifying dissymmetry factor of upconverted circularly polarized luminescence through chirality-induced spin polarization in the photon upconversion process. J. Phys. Chem. Lett. 11, 311–317 (2020).
Zhao, T. H. et al. Multi-light-responsive upconversion-and-downshifting-based circularly polarized luminescent switches in chiral metal-organic frameworks. Adv. Mater. 33, 2101797 (2021).
Zhao, T. H. et al. Dual-mode induction of tunable circularly polarized luminescence from chiral metal-organic frameworks. Research 2020, 6452123 (2020).
Li, W. et al. Tunable upconverted circularly polarized luminescence in cellulose nanocrystal based chiral photonic films. ACS Appl. Mater. Interfaces 11, 23512–23519 (2019).
Yang, X. F. et al. Electric-field-regulated energy transfer in chiral liquid crystals for enhancing upconverted circularly polarized luminescence through steering the photonic bandgap. Adv. Mater. 32, 2000820 (2020).
Juan, A. et al. Near-infrared light-controlled circularly polarized luminescence of self-organized emissive helical superstructures assisted by upconversion nanoparticles. Chem. Commun. 56, 13649–13652 (2020).
Juan, A. et al. Near-infrared light-induced photoisomerization and photodissociation of a chiral fluorescent photoswitch in cholesteric liquid crystals assisted by upconversion nanoparticles. Soft Matter 17, 1404–1408 (2021).
Ye, S. M. et al. Modulated visible light upconversion for luminescence patterns in liquid crystal polymer networks loaded with upconverting nanoparticles. Adv. Opt. Mater. 5, 1600956 (2017).
Wang, L. et al. Reversible near-infrared light directed reflection in a self-organized helical superstructure loaded with upconversion nanoparticles. J. Am. Chem. Soc. 136, 4480–4483 (2014).
Wang, L. et al. Luminescence-driven reversible handedness inversion of self-organized helical superstructures enabled by a novel near-infrared light nanotransducer. Adv. Mater. 27, 2065–2069 (2015).
Qiu, Y. Q. et al. Near-infrared light-driven three-dimensional soft photonic crystals loaded with upconversion nanoparticles. Adv. Opt. Mater. 10, 2102475 (2022).
Li, X. Y. et al. Sub-10 nm aggregation-induced emission quantum dots assembled by microfluidics for enhanced tumor targeting and reduced retention in the liver. Angew. Chem. Int. Ed. 59, 21899–21903 (2020).
Zhao, Z. et al. Aggregation-induced emission: new vistas at the aggregate level. Angew. Chem. Int. Ed. 59, 9888–9907 (2020).
Song, F. Y. et al. Circularly polarized luminescence from AIEgens. J. Mater. Chem. C. 8, 3284–3301 (2020).
Li, X. J. et al. Strong aggregation-induced CPL response promoted by chiral emissive nematic liquid crystals (N*-LCs). Chem. A Eur. J. 24, 12607–12612 (2018).
Gao, X. H. et al. (R)-binaphthyl derivatives as chiral dopants: substituent position controlled circularly polarized luminescence in liquid crystals. Chem. Commun. 55, 5914–5917 (2019).
Ni, B. N. et al. Circularly polarized luminescence from structurally coloured polymer films. Chem. Commun. 57, 2796–2799 (2021).
Zhao, D. Y. et al. Circularly polarized luminescence and a reflective photoluminescent chiral nematic liquid crystal display based on an aggregation-induced emission luminogen. Adv. Optical Mater. 4, 534–539 (2016).
Li, X. J. et al. Strong CPL of achiral AIE-active dyes induced by supramolecular self-assembly in chiral nematic liquid crystals (AIE-N*-LCs). Chem. Commun. 55, 5179–5182 (2019).
Ma, L. L. et al. Submicrosecond electro-optical switching of one-dimensional soft photonic crystals. Photon. Res. 10, 786–792 (2022).
Yuan, C. L. et al. Stimulated transformation of soft helix among helicoidal, heliconical, and their inverse helices. Sci. Adv. 5, eaax9501 (2019).
Zheng, Z. G. et al. Digital photoprogramming of liquid-crystal superstructures featuring intrinsic chiral photoswitches. Nat. Photon. 16, 226–234 (2022).
Hu, H. L. et al. A quadri-dimensional manipulable laser with an intrinsic chiral photoswitch. Adv. Mater. 34, 2110170 (2022).
Ma, L. L. et al. Rationally designed dynamic superstructures enabled by photoaligning cholesteric liquid crystals. Adv. Opt. Mater. 3, 1691–1696 (2015).
Gharbi, M. A. et al. Reversible nanoparticle cubic lattices in blue phase liquid crystals. ACS Nano 10, 3410–3415 (2016).
Ravnik, M. et al. Three-dimensional colloidal crystals in liquid crystalline blue phases. Proc. Natl Acad. Sci. U.S.A. 108, 5188–5192 (2011).
Yang, X. K. et al. Tunable circularly polarized luminescence from inorganic chiral photonic crystals doped with quantum dots. Angew. Chem. Int. Ed. https://doi.org/10.1002/anie.202201674 (2022).
Gong, W. et al. Chiral metal-organic frameworks. Chem. Rev. 122, 9078–9144 (2022).
Frenzel, T., Kadic, M. & Wegener, M. Three-dimensional mechanical metamaterials with a twist. Science 358, 1072–1074 (2017).
Zhuang, T. T. et al. Regioselective magnetization in semiconducting nanorods. Nat. Nanotechnol. 15, 192–197 (2020).
Liu, J. J. et al. Recent advances in inorganic chiral nanomaterials. Adv. Mater. 33, 2005506 (2021).
Naaman, R. & Waldeck, D. H. Spintronics and chirality: spin selectivity in electron transport through chiral molecules. Annu. Rev. Phys. Chem. 66, 263–281 (2015).
Yang, S. H. et al. Chiral spintronics. Nat. Rev. Phys. 3, 328–343 (2021).
This work was financially supported by the National Natural Science Foundation of China (No. 51973155 and 52173181), Jiangsu Innovation Team Program, Natural Science Foundation of Tianjin (20JCYBJC00810), Joint Fund of Equipment Pre-Research and Ministry of Education of China (No. 8091B022140), Key Program of National Natural Science Foundation of China (No. 52130303).
Conflict of interest
The authors declare no competing interests.
About this article
Cite this article
Zhang, X., Xu, Y., Valenzuela, C. et al. Liquid crystal-templated chiral nanomaterials: from chiral plasmonics to circularly polarized luminescence. Light Sci Appl 11, 223 (2022). https://doi.org/10.1038/s41377-022-00913-6
This article is cited by
Nano-Micro Letters (2023)