Solar cells based on polycrystalline Cu(In,Ga)Se2 absorber layers have yielded the highest conversion efficiency among all thin-film technologies1,2,3, and the use of flexible polymer films as substrates offers several advantages in lowering manufacturing costs. However, given that conversion efficiency is crucial for cost-competitiveness, it is necessary to develop devices on flexible substrates that perform as well as those obtained on rigid substrates. Such comparable performance has not previously been achieved, primarily because polymer films require much lower substrate temperatures during absorber deposition, generally resulting in much lower efficiencies4. Here we identify a strong composition gradient in the absorber layer as the main reason for inferior performance and show that, by adjusting it appropriately, very high efficiencies can be obtained. This implies that future manufacturing of highly efficient flexible solar cells could lower the cost of solar electricity and thus become a significant branch of the photovoltaic industry.
Subscribe to Journal
Get full journal access for 1 year
only $4.92 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
Green, M. A., Emery, K., Hishikawa, Y. & Warta, W. Solar cell efficiency table (version 37). Prog. Photovolt. 19, 84–92 (2011).
Repins, I. et al. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor. Prog. Photovolt. 16, 235–239 (2008).
Jackson, P. et al. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%. Prog. Photovolt.http://dx.doi.org/10.1002/pip.1078 (2011).
Shafarman, W. N. & Zhu, J. Effect of substrate temperature and deposition profile on evaporated Cu(InGa)Se2 films and devices. Thin Solid Films 361–362, 473–477 (2000).
Chopra, K. L., Paulson, P. D. & Dutta, V. Thin film solar cells: An overview. Prog. Photovolt. 12, 69–92 (2004).
Grätzel, M. Photoelectrochemical cells. Nature 414, 338–344 (2001).
Bernede, J. C. Organic photovoltaic cells: History, principles and techniques. J. Chilean Chem. Soc. 53, 1549–1564 (2008).
Kessler, F. & Rudmann, D. Technological aspects of flexible CIGS solar cells and modules. Sol. Energy 77, 685–695 (2004).
Niki, S. et al. CIGS absorbers and processes. Prog. Photovolt. 18, 453–466 (2010).
Rudmann, D., Brémaud, D. G., Zogg, H. & Tiwari, A. N. Na incorporation into Cu(In,Ga)Se2 for high-efficiency solar cells on polymer foils. J. Appl. Phys. 97, 084903 (2005).
Caballero, R. et al. High efficiency low temperature grown Cu(In,Ga)Se2 thin film solar cells on flexible substrates using NaF precursor layers. Prog. Photovolt. 19, 547–551 (2011).
Nakada, T. et al. Proc. 24th Eur. PV Solar Energy Conf. (EUPVSEC), 3DO.4.3 (WIP—Renewable Energies, 2010).
Bär, M. et al. Electronic level alignment at the deeply buried absorber/Mo interface in chalcopyrite-based thin film solar cells. Appl. Phys. Lett. 93, 042110 (2008).
Shay, J. L., Wagner, S. & Kasper, H. M. Efficient CuInSe2/CdS solar cells. Appl. Phys. Lett. 27, 89–99 (1975).
Wei, S-H., Zhang, S. B. & Zunger, A. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties. Appl. Phys. Lett. 72, 3199–3201 (1998).
Gabor, A. M. et al. High-efficiency CuInxGa1−xSe2 solar cells made from (Inx,Ga1−x)2Se3 precursor films. Appl. Phys. Lett. 65, 198–200 (1994).
Marudachalam, M. et al. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films. J. Appl. Phys. 82, 2896–2905 (1997).
Contreras, M. A. et al. Graded band-gap Cu(In,Ga)Se2 thin film solar cell absorber with enhanced open-circuit voltage. Appl. Phys. Lett. 63, 1824–1826 (1993).
Seyrling, S. et al. Modification of the three-stage evaporation process for CuIn1−xGaxSe2 absorber deposition. Thin Solid Films 519, 7232–7236 (2011).
Chirilă, A. et al. Influence of high growth rates on evaporated Cu(In,Ga)Se2 layers and solar cells. Prog. Photovolt.http://dx.doi.org/10.1002/pip.1122 (2011).
Rudmann, D. et al. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films. Thin Solid Films 431–432, 37–40 (2003).
Rudmann, D. et al. Sodium incorporation strategies for CIGS growth at different temperatures. Thin Solid Films 480–481, 55–60 (2005).
Chirilă, A. et al. Proc. 35th IEEE Phot. Spec. Conf. (PVSC) 656–660 (IEEE, 2010).
Patent pending No. PCT/IB2011/000857.
Bodegård, M., Lundberg, O., Lu, J. & Stolt, L. Re-crystallisation and interdiffusion in CGS/CIS bilayers. Thin Solid Films 431–432, 46–52 (2003).
Lundberg, O. Band-Gap Profiling and High Speed Deposition of Cu(In,Ga) Se2 for Thin Film Solar Cells. PhD thesis, Uppsala Univ. (2003).
Gloeckler, M. Device Physics of Cu(In,Ga) Se2 Thin-Film Solar Cells. PhD thesis, Colorado State Univ. (2005).
Rau, U. & Schock, H. W. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells recent achievements, current understanding, and future challenges. Appl. Phys. A 69, 131–147 (1999).
Burgelman, M., Nollet, P. & Degrave, S. Modelling polycrystalline semiconductor solar cells. Thin Solid Films 361–362, 527–532 (2000).
Burgelman, M., Verschraegen, J., Degrave, S. & Nollet, P. Modeling thin-film PV devices. Prog. Photovolt. 12, 143–153 (2004).
Jackson, P. et al. High quality baseline for high efficiency, Cu(In1−x,Gax)Se2 solar cells. Prog. Photovolt. 15, 507–519 (2007).
This work was supported by the Swiss National Science Foundation, the Swiss Federal Office of Energy, the European FP7 Project ‘hipo-CIGS’, and the Commission for Technology and Innovation, Switzerland.
The authors declare no competing financial interests.
About this article
Cite this article
Chirilă, A., Buecheler, S., Pianezzi, F. et al. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films. Nature Mater 10, 857–861 (2011). https://doi.org/10.1038/nmat3122
Science Bulletin (2021)
Solar Energy (2021)
Structure engineering of solution-processed precursor films for low temperature fabrication of CuIn(S,Se)2 solar cells
Solar Energy (2021)
Ceramics International (2021)
Cation Substitution of Copper by Silver in the Earth-Abundant Compound Cu2ZnSnS4: Comparative Study of Structural, Morphological, and Optical Properties
Journal of Electronic Materials (2021)