Abstract
The open-circuit voltages of mature single-junction photovoltaic devices are lower than the bandgap energy of the absorber, typically by a gap of 400 mV. For CdTe, which has a bandgap of 1.5 eV, the gap is larger; for polycrystalline samples, the open-circuit voltage of solar cells with the record efficiency is below 900 mV, whereas for monocrystalline samples it has only recently achieved values barely above 1 V. Here, we report a monocrystalline CdTe/MgCdTe double-heterostructure solar cell with open-circuit voltages of up to 1.096 V. The latticed-matched MgCdTe barrier layers provide excellent passivation to the CdTe absorber, resulting in a carrier lifetime of 3.6 μs. The solar cells are made of 1- to 1.5-μm-thick n-type CdTe absorbers, and passivated hole-selective p-type a-SiCy:H contacts. This design allows CdTe solar cells to be made thinner and more efficient. The best power conversion efficiency achieved in a device with this structure is 17.0%.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Green, M. A., Emery, K., Hishikawa, Y., Warta, W. & Dunlop, E. D. Solar cell efficiency tables (version 47). Prog. Photovolt. Res. Appl. 24, 3–11 (2016).
Adachi, S. Optical Constants of Crystalline and Amorphous Semiconductors: Numerical Data and Graphical Information (Springer, 1999); http://dx.doi.org/10.1007/978-1-4615-5247-5
Yang, J.-H. et al. Enhanced p-type dopability of P and As in CdTe using non-equilibrium thermal processing. J. Appl. Phys. 118, 025102 (2015).
Kayes, B. M. et al. 27.6% conversion efficiency, a new record for single-junction solar cells under 1 sun illumination. Conf. Rec. 37th IEEE Photovolt. Spec. Conf. 000004–000008 (2011).
Gessert, T. A. et al. Research strategies toward improving thin-film CdTe photovoltaic devices beyond 20% conversion efficiency. Sol. Energy Mater. Sol. Cells 119, 149–155 (2013).
Kuciauskas, D. et al. Minority carrier lifetime analysis in the bulk of thin-film absorbers using subbandgap (two-photon) excitation. IEEE J. Photovolt. 3, 1319–1324 (2013).
Nakazawa, T., Takamizawa, K. & Ito, K. High efficiency indium oxide/cadmium telluride solar cells. Appl. Phys. Lett. 50, 279–280 (1987).
Burst, J. M. et al. CdTe solar cells with open-circuit voltage greater than 1 V. Nature Energy 1, 16015 (2016).
Dhere, R. et al. Influence of Cds/CdTe interface properties on the device properties. Conf. Rec. 26th IEEE Photovolt. Spec. Conf. 435–438 (1997).
Gloeckler, M., Sankin, I. & Zhao, Z. CdTe solar cells at the threshold to 20% efficiency. IEEE J. Photovoltaics 3, 1389–1393 (2013).
DiNezza, M. J., Zhao, X.-H., Liu, S., Kirk, A. P. & Zhang, Y.-H. Growth, steady-state, and time-resolved photoluminescence study of CdTe/MgCdTe double heterostructures on InSb substrates using molecular beam epitaxy. Appl. Phys. Lett. 103, 193901 (2013).
Zhao, X., Dinezza, M. J., Liu, S., Campbell, C. M. & Zhao, Y. Determination of CdTe bulk carrier lifetime and interface recombination velocity of CdTe/MgCdTe double heterostructures grown by molecular beam epitaxy. Appl. Phys. Lett. 105, 252101 (2014).
Liu, S. et al. Carrier lifetimes and interface recombination velocities in CdTe/MgxCd1-xTe double heterostructures with different Mg compositions grown by molecular beam epitaxy. Appl. Phys. Lett. 107, 041120 (2015).
Hartmann, J. M. et al. CdTe/MgTe heterostructures: growth by atomic layer epitaxy and determination of MgTe parameters. J. Appl. Phys. 80, 6257–6265 (1996).
Kuhn-Heinrich, B. et al. Optical investigation of confinement and strain effects in CdTe/(CdMg)Te quantum wells. Appl. Phys. Lett. 63, 2932–2934 (1993).
Steiner, M. A. et al. Optical enhancement of the open-circuit voltage in high quality GaAs solar cells. J. Appl. Phys. 113, 123109 (2013).
Zhao, X.-H. et al. Time-resolved and excitation-dependent photoluminescence study of CdTe/MgCdTe double heterostructures grown by molecular beam epitaxy. J. Vac. Sci. Technol. B 32, 040601 (2014).
Olson, J. M., Ahrenkiel, R. K., Dunlavy, D. J., Keyes, B. & Kibbler, A. E. Ultralow recombination velocity at Ga0.5In0.5P/GaAs heterointerfaces. Appl. Phys. Lett. 55, 1208–1210 (1989).
Molenkamp, L. W. & van’t Blik, H. F. J. Very low interface recombination velocity in (Al,Ga)As heterostructures grown by organometallic vapor-phase epitaxy. J. Appl. Phys. 64, 4253–4256 (1988).
Masuko, K. et al. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell. IEEE J. Photovolt. 4, 1433–1435 (2014).
Kuo, Y.-S. et al. Monocrystalline ZnTe/CdTe/MgCdTe double heterostructure solar cells grown on InSb substrates. Conf. Rec. 42nd IEEE Photovolt. Spec. Conf. 7355652 (2015).
Battaglia, C. et al. Silicon heterojunction solar cell with passivated hole selective MoOx contact. Appl. Phys. Lett. 104, 113902 (2014).
Acknowledgements
We would like to thank all those among the ASU MBE group members who, although not directly associated with this work, contributed to its success through experimental preparation and discussion, principally Z. He for his efforts in materials and device characterization experimental design. We would also like to thank T. Moriarty, a Senior Scientist at the National Renewable Energy Laboratory, for certification measurements carried out in the PV Cell Performance Laboratory. This work is partially supported by the Department of Energy BAPVC Program under Award Number DE-EE0004946, NSF/DOE QESST ERC under Award Number DE-EE0006335, and the AFOSR Grant FA9550-15-1-0196.
Author information
Authors and Affiliations
Contributions
Y.-H.Z. proposed the ideas to use InSb substrate and DH structure; Y.Z. modelled the device and first proposed the use of a-Si:H as a hole-contact layer on the front MgCdTe barrier; M.B. and Y.Z. then extended the idea to the a-SiCy:H hole-contact layer; S.L. designed and grew DH PL samples; C.M.C., M.L. and E.S. grew the device wafers and participated in editing of the manuscript; X.-H.Z. did XRD measurements and analysis, and together with S.L. analysed the TRPL results and built the theoretical model, M.B. deposited the ITO and hole-contact layers, and processed all the devices; Y.Z., J.B. and M.B. characterized and modelled the device and analysed the results; the manuscript was mainly written by Y.Z., J.B., M.B., X.-H.Z., Z.H., Y.-H.Z., with Y.-H.Z. leading the entire project.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
About this article
Cite this article
Zhao, Y., Boccard, M., Liu, S. et al. Monocrystalline CdTe solar cells with open-circuit voltage over 1 V and efficiency of 17%. Nat Energy 1, 16067 (2016). https://doi.org/10.1038/nenergy.2016.67
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/nenergy.2016.67
This article is cited by
-
Surface Plasmon Resonance-based Ultra-broadband Solar Thermal Absorber Design Using Graphene Material
Plasmonics (2024)
-
Unveiling microscopic carrier loss mechanisms in 12% efficient Cu2ZnSnSe4 solar cells
Nature Energy (2022)
-
Understanding what limits the voltage of polycrystalline CdSeTe solar cells
Nature Energy (2022)
-
Effect of grain boundary orientation on the recombination in polycrystalline materials: a theoretical and simulation study
Applied Physics A (2022)
-
Analysis of Dislocations in CdZnTe Epitaxial Film with Kelvin Probe and Conductive Atomic Force Microscopy
Journal of Electronic Materials (2020)