Emission from electronically excited species forms the basis for an important class of light sources—lasers. So far, commercially available solution-processed blue-emitting laser materials are based on organic compounds or semiconductor nanocrystals that have significant limitations: either low solubility, low chemical- and/or photo-stability and/or uncompetitive prices. Here we report a novel and competitive alternative to these existing laser materials that is based on boron hydrides, inorganic cluster compounds with a rich and diverse chemistry. We demonstrate that solutions of the borane anti-B18H22 show, under pulsed excitation, blue laser emission at 406 nm with an efficiency (ratio of output/input energies) of 9.5%, and a photostability superior to many of the commercially available state-of-the-art blue laser dyes. This demonstration opens the doors for the development of a whole new class of laser materials based on a previously untapped resource for laser technology—the boranes.
Few devices have extended the frontiers of science and technology to the same degree that lasers have, leading to a global market in lasers worth billions of US dollars annually1. Blue-emitting lasers are tools of uppermost importance to many applications, ranging from spectroscopy and material processing to underwater communications, biotechnology and medicine2,3. After nearly 55 years of intense research and development on laser technology, researchers are still pursuing cost-effective solution-processed gain materials for direct generation—as opposed to frequency conversion processes—of tunable, efficient and photostable laser emission in the blue spectral region. Until now, both the commercial availability of this kind of laser media4,5,6,7 and most of the aligned research activity have been directed to the development of either organic-based materials, such as laser dyes8, conjugated polymers9 and oligomers10, or inorganic-based colloidal quantum dots (QDs)11. Although highly efficient and tunable emission is readily available from these materials, there are still important drawbacks that limit widespread commercial usage, such as low solubility in common solvents and polymers, low chemical stability and/or photostability and/or lengthy and costly synthetic procedures. In this regard, organic–inorganic halide perovskites have recently emerged as an alternative and very promising solution-processed gain material. They exhibit a range of advantageous features such us high absorption coefficients, low emission thresholds, easy manipulation of emission wavelength by changing the perovskite stoichiometry and record-breaking photostabilities12. While having a huge potential, they are presently not commercially available and are intrinsically restricted to the solid state. Most problematic is the fact that stimulated emission at the blue spectral edge using these species is only achieved at 150 K, which is an important drawback compromising their applicability. In an attempt to overcome the above limitations, and to provide a radically new solution to the demand for blue laser materials, we have turned our attention to boranes (boron hydrides), a group of inorganic compounds previously unconsidered in laser technology.
Boron has one valence electron fewer than its number of valence orbitals. This ostensible electron-deficiency necessitates hydrides of boron to share electron density in quasi-aromatic delocalized fashions13. It does this by forming molecules of polyhedral cluster geometries14. These geometries represent an architectural bridge in the structural continuum that stretches from the highly condensed clusters adopted by the late transitional metals to the open chains and ring formations found in the hydrocarbons. As chemical and physical behaviour is often a function of structure, then the boron hydrides have, with their unique polyhedral molecular geometries, large potential for novel properties. This is indeed the case, and in recent times boron hydrides—or boranes as these compounds are more commonly referred to—and their derivatives are proving promising candidates for application in medicinal fields15, microelectronics16, reversible capture of small molecules17, catalysis18, in the modification of surfaces19 and as enhancers of the fluorescent properties of various luminescent organic polymers or fluorophores20.
We have recently become interested in the photophysical properties of the binary borane anti-B18H22, the centrosymmetric isomer of octadecaborane(22) that has a polyhedral structure resembling a split soccer ball (Fig. 1). Of all the known binary boranes (compounds consisting only of boron and hydrogen), anti-B18H22 is the only one to have the property of fluorescence. This attribute was first noticed by Hawthorne et al.21, and yet only recently described comprehensively, including a full consideration of all transitions between ground and excited electronic states of the molecule22. In this latter study, anti-B18H22 was revealed to exhibit an intense blue fluorescence at 407 nm (Fig. 2a) with a quantum yield approaching unity (ΦF=0.97). This unexpectedly strong fluorescence arises from a population of a metastable excited state that has a lifetime of 11.2 ns22, which is easily long enough for ready participation in stimulated emission. These fundamental photophysical parameters suggest that anti-B18H22 could make a good laser material, however, not all strongly fluorescent compounds can fulfil the stringent pumping and gain conditions required to achieve laser emission, and, despite its high quantum yield of fluorescence, anti-B18H22 has a molar extinction coefficient (a measure of how strongly a chemical species absorbs light) (Fig. 2a) 10 times lower than those of commercial organic dyes with absorption/emission in the same spectral region. Therefore the question arises: will the photophysical advantages inherent to anti-B18H22, such as its high quantum yield of fluorescence and long excited-state lifetime, outweigh and overcome its associated limitations if operated as a laser? Thus, we embarked on a rigorous study of the laser performance of anti-B18H22 and an evaluation of the potential of this compound as a laser material.
Laser properties of anti-B18H22
Remarkably, solutions of anti-B18H22 indeed show broadband laser emission centred at 406 nm (Fig. 2a) and bright blue-purple laser spots (Fig. 2b) when pumped with a nitrogen laser (λ=337.1 nm) at energies well above the laser threshold. A significant—and maximum—laser energy-conversion efficiency of 9.5% was measured using a 50 mM cyclohexane solution. The laser threshold of this sample, understood as the pump energy at which a change in the slope of the output intensity versus pump energy curve occurs, was found to be 115 μJ (Fig. 2c). Solutions with a concentration of 25 mM showed a slightly lower efficiency (8%), whereas the efficiency of 10 mM solutions could not be detected with the setup used, although a clear laser line and spot were observed. By contrast, samples of concentration 5 mM did not show laser emission at the maximum pump energy available, while concentrations higher than 50 mM could not be satisfactorily prepared due to diminishing solubility of the compound in cyclohexane. Nevertheless, it is noteworthy that such a high concentration is two orders of magnitude greater than that achievable with organic blue dyes, even despite the solvent being organic and the solute inorganic. This, in itself, is intriguing and indicative of the differences between the boranes and organic compounds. For purposes of experimental thoroughness, we employed two other standard pumping sources in addition to the nitrogen laser (see Alternative laser sources in the Methods section), but optimal laser efficiency was achieved with the latter.
These results unambiguously demonstrate that anti-B18H22 renders blue laser emission with a good laser efficiency (~10%). Encouragement may be taken in the consideration that the very first organic laser dyes rendered efficiencies of about 4%23,24. Furthermore, it must be emphasized that this is a new type of laser gain medium in that anti-B18H22 is an inorganic molecular species with structural and chemical properties unlike those of conventional laser materials. In this regard, the boranes, with their wide emission bands and large Stoke’s shifts (Fig. 2a), could become an alternative to the present conjugated carbon-based laser dyes as the active medium for widely tunable high-power laser sources.
Comparison with commercial dye laser diphenylstilbene
To assess the prospects of anti-B18H22 as a genuine alternative laser source, and to place our results into context, we compared them with data obtained using the same experimental setup for the commercial dye laser, Diphenylstilbene (DPS), which is a binary hydrocarbon of similar molecular size and has absorption and emission bands overlapping with those of anti-B18H22 (see Supplementary Fig. 1). A 0.5 mM solution of DPS—pumped with the same nitrogen laser—gives laser emission at 408 nm, with an efficiency of 29% and a threshold of 15 μJ. On first consideration, it is quite surprising that anti-B18H22, a compound with a superior quantum yield of 0.97, renders laser efficiencies lower than DPS, an organic dye with a quantum yield of 0.74 (ref. 25). In an attempt to rationalize this unexpected efficiency deficiency in the borane compound, we employed a theoretical formalism developed by Heudorfer and Marowsky26. This formalism relates the laser threshold and efficiency with the spectroscopic properties of the emitter, as well as the cavity properties. Although this model is more suited for steady-state conditions (long-pulse or continuous-wave excitation), its results are still informative for short-pulse operation. Heudorfer and Marowsky26 found that the threshold pump photon flux (Ipc) can be expressed as:
where κ and p are cavity-related parameters (see the Methods section for a full description), Ntot is the ground-state population density, τ is the fluorescence lifetime, σap0 and σal0 are the ground-state absorption cross-sections at the pump and laser wavelengths, σe is the stimulated emission cross-section and σal1 is the excited singlet-state absorption cross-section at the laser wavelength. Terms for triplet-state effects have not been included in equation (1), as they are negligible under short-pulse excitation. In terms of energy, the laser threshold is expressed as:
where h is Planck’s constant, νp is the frequency of the pumping light, A is the pumping area and τp is the pump-pulse width (see Supplementary Table 1 for values used in equations (1) and (2)).
Assuming that, in a first approximation, excited-state absorption is negligible (σal1=0), the calculated laser threshold (Eth) for DPS and its experimentally measured value are very similar (12 μJ (calc.) versus 15 μJ (exp.)). In comparison, the calculated and experimental values of Eth for anti-B18H22 differ substantially (1 μJ (calc.) versus 115 μJ (exp.)). As laser threshold and laser efficiency are related (the lower the threshold, the higher the laser efficiency), the two orders of magnitude difference between calculated and experimental values of Eth for anti-B18H22 suggest that there is yet scope for improvement in efficiency of this, the first, borane laser.
The above equation (1) alludes to what factors are the probable causes for this loss in laser efficiency. A first consideration is a reduction in the fluorescence quantum yield due to self-quenching27 (both static and dynamic) at the relatively high borane concentrations used in the laser solutions. This would reduce the fluorescence lifetime (τ) and, according to equation (1), increase the threshold. In fact, preliminary measurements suggest that the fluorescence quantum yield of anti-B18H22 in highly concentrated cyclohexane solutions only marginally decreases to ΦF=0.86 (as measured with an integrating sphere for a 5 mM solution). A second consideration is that, at such high concentrations, there are solubility problems. Indeed, we have detected the presence of microcrystallites in solutions of higher concentration that cause a significant level of optical scattering (αSC~0.17 cm−1). A third consideration as a further plausible source of losses is the presence of excited-state absorption at the laser emission wavelength (σal1>0), although this effect cannot be easily proved. Finally, triplet–triplet and ground-state (σal0) absorptions at the laser wavelength can be ruled out, as they were not detected in the previous work22. Interestingly, despite all these losses, anti-B18H22 still emits blue laser light with an efficiency of nearly 10%. Encouragingly, if these effects could be, at least partially, mitigated, then anti-B18H22 could in due course prove to be a laser of remarkable efficiency.
Photostability of anti-B18H22
In terms of commercial utility and feasibility of laser materials, efficiency is not the only crucial variable to be considered. A further important parameter is the photostability of the laser emission over long operation times. Ideally, a high resistance to active medium photodegradation under repeated pumping is sought after28. A reasonable evaluation of the photostability of individual laser materials can be obtained by irradiating a small amount of solution with exactly the same pumping energy and geometry as used for the laser experiments (see Methods for details), and monitoring the evolution of the laser-induced fluorescence (LIF) intensity with respect to the number of pump pulses (see Methods for details). The use of LIF to track the active medium photodegradation makes it possible to monitor how many active molecules have been degraded, as there is a linear relation between the excited molecules and LIF intensity. As such, we are able to determine an intrinsic photodegradation rate that enables absolute comparisons with different active media irrespective of the cavity configuration/parameters and sample concentrations used. Thus, for a 60 μl 5 mM solution of anti-B18H22, an absorbed energy dose of 25 kJ l−1 was needed to reduce the LIF intensity to 90% of its initial value (Fig. 3). In terms of time, this means 20 min pumping at the maximum pump energy of 370 μJ at 15 Hz. In contrast, an absorbed energy dose of 25 kJ l−1 reduced the LIF intensity to 50% of its initial value for a 60 μl 0.05 mM solution of DPS. These data are summarized in Fig. 3, which is a graphic comparison of the relative photostabilities of anti-B18H22 and DPS as well as other commercial state-of-the-art blue laser dyes belonging to different families (BBO, Exalite 404, Coumarin 440 and Carbostyril 124, see Supplementary Fig. 2) and a batch of colloidal QDs (CdSeS/ZnS core/shell), all of which emit around 400–450 nm. Remarkably, anti-B18H22 presents a photostability that is superior to all but one of the tested laser dyes and even the QDs (Fig. 3). Only Exalite 404, which is the benchmark dye in this spectral region, shows a slightly better photostability than anti-B18H22. While LIF measurements enable a basis for the absolute comparison of photostability among different dyes, the device lifetime (as a function of the number of pulses) of the actual laser at the point of maximum efficiency is the most relevant figure of merit from a practical point of view. In this regard, the laser efficiency of a small volume (0.5 ml) of a 50 mM cyclohexane solution of anti-B18H22 showed no sign of degradation after 40,000 pulses with a pump energy of 450 μJ at 15 Hz. Only after 80,000 pulses did the efficiency drop to half of the initial value. In terms of time, this translates to 90 min of constant operation per millilitre of solution. The superior resistance to photodegradation of anti-B18H22 with respect to many blue-emitting materials is one of the more remarkable and potentially useful properties of this new kind of laser material.
Luminescence of anti-B18H22 in polystyrene thin films
Regarding commercially available dye lasers, liquid media (dye solutions in organic solvent) are generally preferred, since their fluid nature facilitates cooling via flow systems and guarantees that the gain medium is constantly renewed. However, the use of solution-based lasers do entail a number of inconveniences and limitations, mainly related to the employment and disposal of large volumes of organic solutions (flammable and often carcinogenic), as well as to the technical complexities of the flow systems that are complicated to handle, maintain and clean. The incorporation of laser materials into solid-state matrices mitigates these limitations significantly29,30. Solid matrices, such as polymers, avoid the use of complex cells or flow systems and after degradation, samples are simply replaced by new ones in a consumable fashion, which in turn enables the use of such lasers by non-highly specialized staff. Another advantage of incorporating chromophores into polymers is that the solid material may be cast as thin films acting as wave-guiding active devices. In fact, there has been significant work over the last few years exploring the development of these types of devices because of their potential applications as coherent light sources suitable for integration in optoelectronic and disposable spectroscopic and sensing devices30,31, as well as its use as luminescent solar concentrators for energy-harvesting applications32. In this regard, the boranes might be a potential candidate, as chromophores in luminescent solar concentrators should have minimal reabsorption (large Stokes shifts), fluorescence quantum yields above 0.90 and high photostabilities33, requirements that are fulfilled by the fluorescent boron hydride, anti-B18H22. Therefore, as a proof-of-concept preliminary experiment to ascertain whether anti-B18H22 could be incorporated into a solid matrix and maintain its fluorescence properties, a chloroform solution mixture of anti-B18H22 and polystyrene was spin-coated onto a quartz substrate to render ~540 nm-thick thin films (see Methods for preparation details). Encouragingly, once these thin films were fully dried, anti-B18H22 seemed to be perfectly dissolved into the polystyrene polymer matrix (no evidence of organic/inorganic phase separation), even at a concentration of 25 mM (0.52 wt% with respect to polymer), and still showed an intense blue fluorescence under ultraviolet lamp irradiation (Fig. 4). This observation, although preliminary, significantly increases the prospects and value of anti-B18H22, in particular, and boranes, in general, as future photonic materials.
A reasonable extrapolation from the successful incorporation of anti-B18H22 into polystyrene polymer matrices is whether these thin films can sustain stimulated emission and thus permit their development as solid-state integrated lasers. However, using the methods to our disposition, neither amplified spontaneous emission nor laser emission could be excited in these thin films. This is not an indication of low efficiency of the system, but rather a consequence of the low absorption coefficient of the thin film at the pump wavelength (α~90 cm−1; absorbed light, <1%), which does not allow the system to reach its laser threshold. Therefore, in terms of solid-state laser performance, anti-B18H22 cannot, for the time being, rival other existing solid-state, solution-processable, blue-laser media34,35,36,37,38. In this regard, further research into the development of new luminescent boranes with stronger absorption properties will ultimately delineate the prospects of efficient and photostable thin-film solid-state borane lasers going forward.
In closing, we have demonstrated that solutions of anti-B18H22 function as a blue laser with a good efficiency of 9.5% and an outstanding resistance to photodegradation. Its excellent solubility in organic environments enables the incorporation of anti-B18H22 into polystyrene polymer matrices, without the loss of its fluorescence properties. In addition, theoretical calculations of the laser threshold (Eth) for solutions of anti-B18H22 suggest considerable scope for the improvement of its laser efficiency. To this end, an increase in the absorbance coefficient of the borane species at the pumping wavelength is desirable, such that lower concentrations could be used for lasing. This would considerably reduce problems of self-quenching, optical scattering and self-absorption losses. It has not escaped our thoughts that perhaps rational modification of the eighteen-vertex borane cluster structure could possibly lead to such desired changes in absorption coefficient, and, in this regard, anti-B18H22 would become the first of a new family of laser materials—the laser boranes. Indeed, very recent and preliminary experimentation in our laboratories reveal that the functionalization of the borane cluster anti-B18H22 (with different functional groups and/or varying number of functional groups) leads to new derivatives that show strong fluorescence at different wavelengths through the visible region. These observations suggest the boranes to be useful compounds to build tunable sources of light emission. Work is currently in progress towards the control of these functionalization processes, and optimization of synthetic and purification protocols.
Anti-B18H22 was synthesized by the iodine oxidation of the [B9H12]− anion according to the method described in the literature39. Pure samples were obtained by repeated crystallizations from hot saturated n-hexane solutions, followed by sublimation under vacuum at 135 °C, and had 11B and 1H NMR and mass spectroscopic characteristics in agreement with the published data21,40. The resulting crystalline powder is readily soluble in organic non-polar aprotic solvents (for example, cyclohexane) and can thus be handled experimentally in an analogous way to that of well-known organic dyes. Therefore, beyond stirring and sonication, no special experimental conditions were necessary for the preparation of laser solutions or for the collection of data, and we could base our study on the vast amount of knowledge on dye laser science and technology in the literature28,41,42.
Solutions of anti-B18H22 were prepared in non-polar aprotic solvents, as this compound is otherwise prone to deprotonation (pKa=2.68), which would lead to the formation of its [B18H21]− anion and the loss of the compound’s fluorescent emission. Anti-B18H22 exhibits a rather low molar extinction coefficient at the pump wavelength (ε (at 337 nm) ~5,625 M−1 cm−1), which necessitates the use of highly concentrated solutions to achieve the optical densities required in transversal pumping (OD~20). As anti-B18H22 is not soluble in hexane at such concentrations, we used fresh cyclohexane instead. DPS was purchased from Lambdachrome (available currently from Exciton Inc.) and was dissolved in 1,4-dioxane. BBO, Exalite 440 and Coumarin 440 were purchased from Exciton Inc. and dissolved in toluene, p-dioxane and methanol, respectively. Carbostyril 124 and CdSeS/ZnS core/shell QDs were purchased from Aldrich and dissolved (or diluted in the case of QDs), in ethanol and toluene, respectively. The solutions were sonicated and stirred until complete dissolution of compounds, and placed in spectroscopic quartz cuvettes carefully sealed to avoid solvent evaporation.
Laser measurements setup
Figure 5 shows a sketch and an aerial photograph of the experimental setup used for the laser experiments. The samples were optically pumped at 337.1 nm with 4 ns full-width-at-half-maximum (FWHM) pulses from a nitrogen laser (upgraded MNL-100 from Laser Technik Berlin) operated at 10 or 30 Hz repetition rate. The maximum pump energy reaching the cuvette was 220 μJ. The pump energy was controlled through calibrated neutral-density filters. The light incident on the sample was perpendicular to the surface of the cuvette and focused onto that surface in a stripe shape 1 cm long and 200 μ wide by a combination of negative and positive cylindrical quartz lenses (f=−15 and +15 cm, respectively), perpendicularly arranged. The oscillation cavity was L0=3.5 cm long and had a 90% reflectivity aluminium back mirror together with the end face of the cuvette as the output coupler (4.7% reflectivity).
The laser emission was collected with a 5 cm focal length spherical lens, focused onto a fibre bundle and detected with a spectrograph/monochromator (Spectrapro-300i Acton Research), equipped with a thermoelectrically cooled charge-coupled device (CCD) detector (SpectruMM:GS 128B) to acquire the spectra, and a photomultiplier (Hamamatsu R928) for the photostability measurements. Calibrated neutral-density filters were used before the fibre bundle to avoid saturation of the detector. For the efficiency measurements, a pyroelectric energy meter (GenTec ED-100A and ED-200) was placed at the exit of the output coupler.
Residual pump light was sent into a photodiode acting as the trigger. The trigger signal was fed to a boxcar (Stanford Research, model 250) to convert it to a delayed transistor-transistor logic (TTL) pulse to start the CCD or photomultiplier acquisition. The signal from the CCD was sent directly to a Personal Computer (PC) card, while the signal from the photomultiplier was fed again to the boxcar to be integrated before being digitized and processed by a computer.
Alternative laser sources
For purposes of experimental thoroughness, we employed two other standard pumping sources in addition to the nitrogen laser, with pumping wavelengths at two positions either side of the peak maximum of the absorption band of anti-B18H22. Thus, pumping of cyclohexane solutions of anti-B18H22 at 355 nm with the 3rd harmonic of a Nd:YAG (Lotis TII SL-2132, 20 ns FWHM pulses, 15 Hz repetition rate) laser led to observable, but not measureable, laser emission. Pumping with an Xe-Cl excimer laser (Lambda Physik LPX 105i, 20 ns FWHM pulses, 2 Hz repetition rate), emitting at 308 nm, gave a weak laser emission with an efficiency of about 3% (Supplementary Fig. 3). In each case, there was bubble formation in the excited area due to excessive pump energy (~5–10 mJ). In the experiment with the excimer laser, reducing the pump energy to levels at which there was no bubble formation, resulted in output energies too low to be measured. Therefore, in summary, optimal laser efficiency was achieved from pumping with a nitrogen laser at a wavelength 337 nm.
The pumping energy and geometry were exactly equal to that of the laser experiments (see Fig. 5). We used spectroscopic quartz cuvettes with 1 cm optical paths and depths L=0.1 cm to allow for the minimum solution volume (VS=60 μl) to be excited. The lateral facets were grounded, whereupon no laser oscillation was obtained. To avoid stimulated emission processes, and to only monitor the amount of active molecules still available, we used low-concentration solutions in which only LIF was observed.
Absorbed energy dose
A proper comparison of photostability measurements obtained for different samples and/or materials is a difficult task because of the substantial differences in the experimental conditions, such as pump intensity, pump repetition rate, dye concentration or excited volume. To facilitate comparisons independently of the experimental setup and sample, Dai et al.43 introduced a normalized photostability defined as the accumulated pump energy absorbed by the system, per litre of solution, before the output energy falls to one-half its initial value. In terms of experimental parameters, this energy dose, in units of kJ l−1, can be expressed as:
where Epump is the energy per pulse in Joules, C is the molar concentration, ε is the molar absorption coefficient in units of M−1 cm−1, L is the depth of the cuvette expressed in cm, VS is the solution volume, in litres, within the cuvette and f is the ratio between the LIF intensity after #pulses and the LIF intensity in the first pulse. It can be shown that Σf accounts for the reduction in pump absorption due to species photodegradation.
Laser threshold analysis
In the theoretical formalism for the threshold pump photon flux (Ipc) developed by Heudorfer and Marowsky26 (equation 1) κ is the single-pass loss coefficient that is related to the cavity reflectivities (R1: rear-mirror; R2: output coupler) and other non-resonant losses (α0) such as optical scattering:
In addition, p describes the ratio of excited (LE=1 cm) and unexcited (LU=2.5 cm) cavity pathlengths (LE+LU=L0):
Ntot is the ground-state population density, τ is the fluorescence lifetime, σap0 and σal0 are the ground-state absorption cross-sections at the pump and laser wavelengths and σal1 is the excited singlet-state absorption cross-section at the laser wavelength. Absorption cross-section (σap0) and molar extinction coefficient (ε) are related through the expression: σap0=ln(10)·1,000·ε/NA, where NA is Avogadro’s number.
σe is the stimulated emission cross-section and is given by σe=[λ4E(λ)]/8πcη2τ, where E(λ) is the S1→S0 fluorescence spectrum normalized, so that ∫E(λ)dλ=ΦF, ΦF being the fluorescence quantum yield, and η the refractive index of the solution.
Preparation of anti-B18H22/polystyrene thin films
A chloroform solution of polystyrene (Mw~192000, Aldrich) (30 mg ml−1) mixed with anti-B18H22 (25 mM or 0.52 wt% with respect to polymer) was stirred overnight to ensure complete solution homogeneity. 80 μl aliquots of this solution were then deposited onto clean fused quartz substrates (1 × 1 cm) and immediately spun for 30 s at 1,000 r.p.m. using a spin-coater device before subsequently drying in an oven set at 70 °C to remove residual traces of solvent. The thickness of the resultant thin films, of around 540 nm, was determined by means of interference signatures in the absorption spectra44. Such thin films render absorption coefficients (absorbances) for the borane of α~260 cm−1 (0.006) and α~90 cm−1 (0.002) at peak (330 nm) and pump (355 nm) wavelengths, respectively.
How to cite this article: Cerdán, L. et al. A borane laser. Nat. Commun. 6:5958 doi: 10.1038/ncomms6958 (2015).
The Worldwide Market for Lasers: Market Review and Forecast (Strategies Unlimited, 2014) (http://store.strategies-u.com/the-worldwide-market-for-lasers-market-review-and-forecast-2014/).
Duarte F. J. (ed.)Tunable Laser Applications CRC Press (2009).
Risk, W. P., Gosnell, T. R. & Nurmikko, A. V. Compact Blue-Green Lasers Cambridge Univ. Press (2003).
American Dye Source Inc., . www.adsdyes.com (2014).
Sigma-Aldrich, www.sigmaaldrich.com (2014).
Exciton, www.exciton.com (2014).
MKNano, www.mknano.com (2014).
Gómez-Durán, C. F. A. et al. 8-PropargylaminoBODIPY: the first blue-emitting pyrromethene dye. Synthesis, photophysics and laser properties. Chem. Commun. 46, 5103–5105 (2010).
Heliotis, G., Xia, R. & Bradley, D. D. C. Blue, surface-emitting, distributed feedback polyfluorene lasers. Appl. Phys. Lett. 83, 2118–2121 (2003).
Wang, Y. et al. Broadly tunable deep blue laser based on a star-shaped oligofluorene truxene. Synth. Metals 160, 1397–1400 (2010).
Dang, C. et al. Red, green and blue lasing enabled by single-excitation gain in colloidal quantum dots films. Nat. Nanotechnol. 7, 335–339 (2012).
Xing, G. et al. Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nat. Mater. 13, 476–480 (2014).
King, R. B. Three-dimensional aromaticity in polyhedral boranes and related molecules. Chem. Rev. 101, 1119–1152 (2001).
Muetterties, E. L. Boron Hydride Chemistry Academic Press (1975).
Brynda, J. et al. Carborane-based carbonic anhydrase inhibitors. Angew. Chem. Int. Ed. 52, 13760–13763 (2013).
Kawasaki, Y. et al. Ultra-shallow junction formation by B18H22 ion implantation. Nucl. Instrum. Meth. B 237, 25–29 (2005).
Bould, J. et al. Reversible capture of small molecules on bimetallaborane clusters: synthesis, structural characterization, and photophysical aspects. Inorg. Chem. 50, 7511–7523 (2011).
Alvarez, A. et al. Alkene hydrogenation on an 11-vertex rhodathiaborane with full cluster participation. J. Am. Chem. Soc. 130, 11455–11466 (2008).
Baše, T. et al. Carboranethiol-modified gold surfaces. A study and comparison of modified cluster and flat surfaces. Langmuir 21, 7776–7785 (2005).
Dash, B. P., Satapathy, R., Maguire, J. A. & Hosmane, N. S. Polyhedral boron clusters in materials science. New J. Chem. 35, 1955–1972 (2011).
Pitochelli, A. R. & Hawthorne, M. F. Preparation of a new boron hydride B18H22 . J. Am. Chem. Soc. 84, 3218–3228 (1962).
Londesborough, M. G. S. et al. Distinct photophysics of the isomers of B18H22 explained. Inorg. Chem. 51, 1471–1479 (2012).
Sorokin, P. P. & Lankard, J. R. Stimulated emission observed from an organic dye, chloro-aluminum phthalocyanine. IBM J. Res. Dev. 10, 162–163 (1966).
Schäfer, F. P., Schmidt, W. & Volze, J. Organic dye solution laser. Appl. Phys. Lett. 9, 306–309 (1966).
Tan, X. & Gustafson, T. L. Solvent-solute interactions probed by picosecond time-resolved fluorescence spectroscopy: lifetime and anisotropy study of S1 trans-4,4’-diphenylstilbene. J. Phys. Chem. A 104, 4469–4474 (2000).
Heudorfer, W. & Marowsky, G. Threshold singularities of optically pumped dye lasers. Appl. Phys. 17, 181–187 (1978).
Valeur, B. Molecular Fluorescence Wiley-VCH (2002).
Duarte F. J. (ed.) High-Power Dye Lasers, Springer Series in Optical Sciences Vol. 65Springer (1991).
Costela, A., García-Moreno, I. & Sastre, R. inHandbook of Advanced Electronic and Photonic Materials and Devices Vol. 7, ed. Nalwa H. S. 161–208Academic Press (2001).
Forget, S. & Chénais, S. Organic Solid-State Lasers, Springer Series in Optical Sciences Vol. 175 (Springer (2013).
Grivas, C. & Pollnau, M. Organic solid-state integrated amplifiers and lasers. Laser Photon. Rev. 6, 419–462 (2012).
Debije, M. G. & Verbunt, P. P. C. Thirty years of luminescent solar concentrator research: solar energy for the built environment. Adv. Energy Mater. 2, 12–35 (2012).
Rowan, B. C., Wilson, L. R. & Richards, B. S. Advanced material concepts for luminescent solar concentrators. IEEE J. Sel. Top. Quantum Electron. 14, 1312–1322 (2008).
Nakanotani, H. et al. Extremely low-threshold amplified spontaneous emission of 9,9’-spirobifluorene derivatives and electromuminescence from filed-effect structure. Adv. Funct. Mater. 17, 2328–2335 (2007).
Schneider, D. et al. Laser threshold reduction in an all-spiro guest-host system. Appl. Phys. Lett. 85, 1659–1661 (2004).
Xia, R. et al. Low-threshold distributed-feedback lasers base don pyrene-cored starburst molecules with 1,3,6,8-attached oligo(9,9-dialkilfluorene) arms. Adv. Funct. Mater. 19, 2844–2850 (2009).
Lai, W. Y. et al. Enhanced solid-state luminescence and low-threshold lasing from starburst macromolecular materials. Adv. Mater. 21, 355–360 (2009).
Qian, Y. et al. H-shaped oligofluorenes for highly air-stable and low-threshold non-doped deep blue lasing. Adv. Mater. 26, 2937–294 (2014).
Li, Y. & Sneddon, L. G. Improved synthetic route to n-B18H22 . Inorg. Chem. 45, 470–471 (2006).
Plešek, J., Heřmánek, S., Štíbr, B. & Hanousek, F. Chemistry of boranes 7. A new synthesis of borane B18H22 – An application of 3-center bonds theory on interpretation of reaction mechanisms. Collect. Czech. Chem. Commun. 32, 1095–1103 (1967).
Schäfer F. P. (ed.) Dye Lasers, Topics in Applied Physics Vol. 13rd edn Springer (1990).
Duarte F. J., Hillman L. W. (eds)Dye Laser Principles Academic Press (1990).
Dai, H., Lin, H. T. & Stafsudd, O. M. in Proceedings of the Society of Photo-optical Instrumentation Engineers on Solid State Lasers IV (eds Quarles G. J., Woodall M. A.) 1864, 50–56 (1993).
Swanepoel, R. Determination of the thickness and optical constants of amorphous silicon. J. Phys. E Sci. Instrum. 16, 1214–1222 (1983).
Simpson, P. G. & Lipscomb, W. N. Molecular, crystal, and valence structure of B18H22 . J. Chem. Phys. 39, 26 (1963).
We thank Dr Luis Díaz-Sol of IEM-CSIC and Dr Jorge Bañuelos and Ixone Esnal of UPV-EHU for their kind support with some of the experimentation, and Prof. John D. Kennedy of Leeds University and Dr Graham Turnbull of St Andrews University for useful discussions. We are in debt to Laser Technik Berlin for the loan of the nitrogen laser used in our experiments. This work was supported by the Grant Agency of the Czech Republic grant no. P207/11/1577, and by Project MAT2010-20646-C04-01 of the Spanish Ministerio de Economia y Competitividad (MINECO). This work was also partially supported by the internal grant of the J. E. Purkinje University in Ústí nad Labem in the Czech Republic (SGA project 5322215000101).
The authors declare no competing financial interests.
About this article
Cite this article
Cerdán, L., Braborec, J., Garcia-Moreno, I. et al. A borane laser. Nat Commun 6, 5958 (2015). https://doi.org/10.1038/ncomms6958